You are not logged in.
Greetings to the Forum!
I can see that the thread of gabe.benson is marked "solved". https://bbs.archlinux.org/viewtopic.php?id=126170. But my problem is quite similar and very weird so i decided to open the thread again. I am new in this forum.
I face the same problem, just like the person who opened the thread. My computer Ram is 8G. BIOS, live-cd's and other distributions detect it properly. I tried removing the ram sticks and puting them carefully back in place with no luck. I also tried reseting to defaults.
$uname -a
Linux lilwing 4.4.35-1-lts #1 SMP Sat Nov 26 17:36:32 CET 2016 i686 GNU/Linux
checking the ram on Arch :
$ free -m
total used free shared buff/cache available
Mem: 3285 626 2113 68 544 2415
Swap: 0 0 0
Checking with lshw :
$lshw | grep -A 8 bank
*-bank:0
description: DIMM DDR2 Synchronous 667 MHz (1,5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 2GiB
width: 64 bits
--
*-bank:1
description: DIMM DDR2 Synchronous 667 MHz (1,5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 2GiB
width: 64 bits
--
*-bank:2
description: DIMM DDR2 Synchronous 667 MHz (1,5 ns)
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
size: 2GiB
width: 64 bits
--
*-bank:3
description: DIMM DDR2 Synchronous 667 MHz (1,5 ns)
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
size: 2GiB
width: 64 bits
I tried to give kernel parameter mem=8G on boot. the result is :
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=573c4ab8-ab66-4280-a215-b11fb7403665 rw mem=8G
I done it editing /etc/default/grub and after that :
sudo grub-mkconfig -o /boot/grub/grub.cfg
weird...the amount of ram is stil not real. Biggest problem for me is that i cannot assign more ram on virtual mashines. The primary desktop experience is not really bothering me.
My motherboard, old, not really ancient, perhaps king Henry's age, is an ASUS M3N78-VM. It's last update in 2010 allowed me to use AMD 1055T prc. Couple years ago Arch was running with no problems at all. The installation this week brings on this matter. The most exotic on the MB setup i would consider mentioning is that on PCIe SATA adaptor i connect a Kingston SSD with the root partition of Arch.
Is this a bug? Do you have any suggestions?
Last edited by linuxpragma (2016-12-03 21:08:22)
Offline
i686 GNU/Linux
You're running a 32-bit OS.
But whether the Constitution really be one thing, or another, this much is certain - that it has either authorized such a government as we have had, or has been powerless to prevent it. In either case, it is unfit to exist.
-Lysander Spooner
Offline
i686 GNU/Linux
You're running a 32-bit OS.
Wow i m hitting my head against the wall now.....I done everything without really paying attention. Well done for me!
Anyway. Thank you very much alphaniner. Going to get a cold shower now! Case closed
Offline
That's what I thought, and why I asked for "uname -a" -- glad you got it sorted. Please remember to mark your thread [SOLVED] (edit the title of your first post and prepend [SOLVED] to the title.)
How to post. A sincere effort to use modest and proper language and grammar is a sign of respect toward the community.
Offline