You are not logged in.

Pages: 1

#1 2016-12-11 06:34:10

mh605
Member
Registered: 2016-12-11
Posts: 1

X failure after upgrade from 4.8.6-1-ARCH

Hi,

I have a Dell Precision 5510 laptop (Xeon E3-1505M, Intel HD Graphics P530 + Nvidia Quadro M1000M) running Gnome with kernel 4.8.6-1.  Over the last month I've experienced the same error after every system update:  X fails to start, with the "no screens found" fatal server error shown in the Xorg.0.log.old file shown below.  If I downgrade the kernel back to 4.8.6-1 (without downgrading any other packages) everything works fine again.  I've been hoping that the issue will get resolved eventually, but I've now confirmed it for kernels 4.8.7-1, 4.8.8-1, and 4.8.12-3.  Is there some additional configuration trick that I am missing that is necessary for kernels >4.8.6-1?

Here is the X.org.log file showing the failure (after the kernel upgrade):

[     9.710] (--) Log file renamed from "/var/log/Xorg.pid-523.log" to "/var/log/Xorg.0.log"
[     9.710] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     9.710] X Protocol Version 11, Revision 0
[     9.710] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[     9.710] Current Operating System: Linux michaeldell 4.8.6-1-ARCH #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016 x86_64
[     9.710] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=5b1cc4a9-b177-4963-9248-d3adbf0de7df rw
[     9.710] Build Date: 19 July 2016  05:54:24PM
[     9.710]  
[     9.710] Current version of pixman: 0.34.0
[     9.710] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.711] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.711] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 11 00:34:27 2016
[     9.711] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.711] (==) No Layout section.  Using the first Screen section.
[     9.711] (==) No screen section available. Using defaults.
[     9.711] (**) |-->Screen "Default Screen Section" (0)
[     9.711] (**) |   |-->Monitor "<default monitor>"
[     9.711] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     9.711] (==) Automatically adding devices
[     9.711] (==) Automatically enabling devices
[     9.711] (==) Automatically adding GPU devices
[     9.711] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.711] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     9.711] 	Entry deleted from font path.
[     9.711] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     9.711] 	Entry deleted from font path.
[     9.711] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     9.711] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     9.711] 	Entry deleted from font path.
[     9.711] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     9.711] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[     9.711] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.711] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.711] (II) Loader magic: 0x821d40
[     9.711] (II) Module ABI versions:
[     9.711] 	X.Org ANSI C Emulation: 0.4
[     9.711] 	X.Org Video Driver: 20.0
[     9.711] 	X.Org XInput driver : 22.1
[     9.711] 	X.Org Server Extension : 9.0
[     9.712] (++) using VT number 1

[     9.714] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c8
[     9.716] (--) PCI:*(0:0:2:0) 8086:191d:1028:06e5 rev 6, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     9.716] (--) PCI: (0:1:0:0) 10de:13b1:1028:06e5 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     9.716] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     9.716] (II) LoadModule: "glx"
[     9.717] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.718] (II) Module glx: vendor="X.Org Foundation"
[     9.718] 	compiled for 1.18.4, module version = 1.0.0
[     9.718] 	ABI class: X.Org Server Extension, version 9.0
[     9.718] (==) AIGLX enabled
[     9.718] (==) Matched intel as autoconfigured driver 0
[     9.718] (==) Matched modesetting as autoconfigured driver 1
[     9.718] (==) Matched fbdev as autoconfigured driver 2
[     9.718] (==) Matched vesa as autoconfigured driver 3
[     9.718] (==) Assigned the driver to the xf86ConfigLayout
[     9.718] (II) LoadModule: "intel"
[     9.718] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     9.718] (II) Module intel: vendor="X.Org Foundation"
[     9.718] 	compiled for 1.18.4, module version = 2.99.917
[     9.718] 	Module class: X.Org Video Driver
[     9.718] 	ABI class: X.Org Video Driver, version 20.0
[     9.718] (II) LoadModule: "modesetting"
[     9.718] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     9.718] (II) Module modesetting: vendor="X.Org Foundation"
[     9.718] 	compiled for 1.18.4, module version = 1.18.4
[     9.718] 	Module class: X.Org Video Driver
[     9.718] 	ABI class: X.Org Video Driver, version 20.0
[     9.718] (II) LoadModule: "fbdev"
[     9.718] (WW) Warning, couldn't open module fbdev
[     9.718] (II) UnloadModule: "fbdev"
[     9.718] (II) Unloading fbdev
[     9.718] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.718] (II) LoadModule: "vesa"
[     9.719] (WW) Warning, couldn't open module vesa
[     9.719] (II) UnloadModule: "vesa"
[     9.719] (II) Unloading vesa
[     9.719] (EE) Failed to load module "vesa" (module does not exist, 0)
[     9.719] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     9.719] (II) intel: Driver for Intel(R) HD Graphics
[     9.719] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     9.719] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     9.719] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    11.742] intel: waited 2020 ms for i915.ko driver to load
[    11.745] (EE) open /dev/dri/card0: No such file or directory
[    11.745] (WW) Falling back to old probe method for modesetting
[    11.745] (EE) open /dev/dri/card0: No such file or directory
[    11.745] (EE) Screen 0 deleted because of no matching config section.
[    11.745] (II) UnloadModule: "modesetting"
[    11.745] (EE) Device(s) detected, but none match those in the config file.
[    11.745] (EE) 
Fatal server error:
[    11.745] (EE) no screens found(EE) 
[    11.745] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    11.745] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    11.745] (EE) 
[    11.753] (EE) Server terminated with error (1). Closing log file.

For comparison, I'm also including the Xorg.log file when everything works well (on kernel 4.8.6-1):

[    67.992] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    67.992] X Protocol Version 11, Revision 0
[    67.992] Build Operating System: Linux 4.5.4-1-ARCH x86_64 
[    67.992] Current Operating System: Linux michaeldell 4.8.6-1-ARCH #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016 x86_64
[    67.992] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=5b1cc4a9-b177-4963-9248-d3adbf0de7df rw
[    67.992] Build Date: 19 July 2016  05:54:24PM
[    67.992]  
[    67.992] Current version of pixman: 0.34.0
[    67.992] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    67.992] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    67.992] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Dec 11 00:43:30 2016
[    67.993] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[    67.993] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[    67.993] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    67.993] (==) ServerLayout "Layout0"
[    67.993] (==) No screen section available. Using defaults.
[    67.993] (**) |-->Screen "Default Screen Section" (0)
[    67.993] (**) |   |-->Monitor "<default monitor>"
[    67.993] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    67.993] (**) |   |-->Device "DiscreteNvidia"
[    67.993] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    67.993] (**) Option "AutoAddDevices" "false"
[    67.993] (**) Option "AutoAddGPU" "false"
[    67.994] (**) Not automatically adding devices
[    67.994] (==) Automatically enabling devices
[    67.994] (**) Not automatically adding GPU devices
[    67.994] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    67.994] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    67.994] 	Entry deleted from font path.
[    67.994] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    67.994] 	Entry deleted from font path.
[    67.994] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    67.994] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    67.994] 	Entry deleted from font path.
[    67.994] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    67.994] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    67.994] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[    67.994] (==) |-->Input Device "<default pointer>"
[    67.994] (==) |-->Input Device "<default keyboard>"
[    67.994] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[    67.994] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[    67.994] (II) Loader magic: 0x821d40
[    67.994] (II) Module ABI versions:
[    67.994] 	X.Org ANSI C Emulation: 0.4
[    67.994] 	X.Org Video Driver: 20.0
[    67.994] 	X.Org XInput driver : 22.1
[    67.994] 	X.Org Server Extension : 9.0
[    67.994] (--) using VT number 2

[    67.994] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    67.995] (II) xfree86: Adding drm device (/dev/dri/card0)
[    67.995] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    68.421] (--) PCI:*(0:1:0:0) 10de:13b1:1028:06e5 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    68.421] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    68.421] (II) LoadModule: "glx"
[    68.422] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[    68.443] (II) Module glx: vendor="NVIDIA Corporation"
[    68.443] 	compiled for 4.0.2, module version = 1.0.0
[    68.443] 	Module class: X.Org Server Extension
[    68.443] (II) NVIDIA GLX Module  375.20  Tue Nov 15 16:38:52 PST 2016
[    68.444] (II) LoadModule: "nvidia"
[    68.445] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    68.448] (II) Module nvidia: vendor="NVIDIA Corporation"
[    68.448] 	compiled for 4.0.2, module version = 1.0.0
[    68.448] 	Module class: X.Org Video Driver
[    68.449] (II) LoadModule: "mouse"
[    68.450] (WW) Warning, couldn't open module mouse
[    68.450] (II) UnloadModule: "mouse"
[    68.450] (II) Unloading mouse
[    68.450] (EE) Failed to load module "mouse" (module does not exist, 0)
[    68.450] (II) LoadModule: "kbd"
[    68.450] (WW) Warning, couldn't open module kbd
[    68.450] (II) UnloadModule: "kbd"
[    68.450] (II) Unloading kbd
[    68.450] (EE) Failed to load module "kbd" (module does not exist, 0)
[    68.450] (II) NVIDIA dlloader X Driver  375.20  Tue Nov 15 16:15:23 PST 2016
[    68.450] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    68.451] (II) Loading sub module "fb"
[    68.451] (II) LoadModule: "fb"
[    68.451] (II) Loading /usr/lib/xorg/modules/libfb.so
[    68.452] (II) Module fb: vendor="X.Org Foundation"
[    68.452] 	compiled for 1.18.4, module version = 1.0.0
[    68.452] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    68.452] (II) Loading sub module "wfb"
[    68.452] (II) LoadModule: "wfb"
[    68.452] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    68.453] (II) Module wfb: vendor="X.Org Foundation"
[    68.453] 	compiled for 1.18.4, module version = 1.0.0
[    68.453] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    68.453] (II) Loading sub module "ramdac"
[    68.453] (II) LoadModule: "ramdac"
[    68.453] (II) Module "ramdac" already built-in
[    68.454] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    68.454] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    68.454] (==) NVIDIA(0): RGB weight 888
[    68.454] (==) NVIDIA(0): Default visual is TrueColor
[    68.454] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    68.455] (**) NVIDIA(0): Option "NoLogo" "true"
[    68.455] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[    68.455] (**) NVIDIA(0): Option "UseEDID" "false"
[    68.455] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[    68.455] (**) NVIDIA(0): Enabling 2D acceleration
[    68.455] (**) NVIDIA(0): Ignoring EDIDs
[    68.455] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[    68.455] (**) NVIDIA(0):     mode
[    68.676] (II) NVIDIA(0): NVIDIA GPU Quadro M1000M (GM107GL-A) at PCI:1:0:0 (GPU-0)
[    68.676] (--) NVIDIA(0): Memory: 2097152 kBytes
[    68.676] (--) NVIDIA(0): VideoBIOS: 82.07.82.00.29
[    68.676] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    68.676] (II) NVIDIA(0): Validated MetaModes:
[    68.676] (II) NVIDIA(0):     "NULL"
[    68.676] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    68.676] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    68.676] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    68.676] (--) Depth 24 pixmap format is 32 bpp
[    68.676] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    68.676] (II) NVIDIA:     access.
[    68.687] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    68.687] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    68.687] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    68.687] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    68.687] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    68.687] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    68.687] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    68.687] (II) NVIDIA(0):     Config Options in the README.
[    68.719] (II) NVIDIA(0): Setting mode "NULL"
[    68.724] (==) NVIDIA(0): Disabling shared memory pixmaps
[    68.724] (==) NVIDIA(0): Backing store enabled
[    68.724] (==) NVIDIA(0): Silken mouse enabled
[    68.724] (==) NVIDIA(0): DPMS enabled
[    68.725] (II) Loading sub module "dri2"
[    68.725] (II) LoadModule: "dri2"
[    68.725] (II) Module "dri2" already built-in
[    68.725] (II) NVIDIA(0): [DRI2] Setup complete
[    68.725] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    68.725] (--) RandR disabled
[    68.728] (II) Initializing extension GLX
[    68.728] (II) Indirect GLX disabled.
[    68.988] (II) LoadModule: "mouse"
[    68.989] (WW) Warning, couldn't open module mouse
[    68.989] (II) UnloadModule: "mouse"
[    68.989] (II) Unloading mouse
[    68.989] (EE) Failed to load module "mouse" (module does not exist, 0)
[    68.989] (EE) No input driver matching `mouse'
[    68.989] (II) LoadModule: "kbd"
[    68.989] (WW) Warning, couldn't open module kbd
[    68.989] (II) UnloadModule: "kbd"
[    68.989] (II) Unloading kbd
[    68.989] (EE) Failed to load module "kbd" (module does not exist, 0)
[    68.989] (EE) No input driver matching `kbd'
[    68.993] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    68.993] (II) AutoAddDevices is off - not adding device.
[    68.993] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    68.993] (II) AutoAddDevices is off - not adding device.
[    68.993] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    68.993] (II) AutoAddDevices is off - not adding device.
[    68.994] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    68.994] (II) AutoAddDevices is off - not adding device.
[    68.994] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    68.994] (II) AutoAddDevices is off - not adding device.
[    68.994] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    68.994] (II) AutoAddDevices is off - not adding device.
[    68.994] (II) config/udev: Adding drm device (/dev/dri/card0)
[    68.994] (II) xfree86: Adding drm device (/dev/dri/card0)
[    68.994] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    68.995] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[    68.995] (II) AutoAddDevices is off - not adding device.
[    68.995] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[    68.995] (II) AutoAddDevices is off - not adding device.
[    68.995] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    68.995] (II) AutoAddDevices is off - not adding device.
[    68.995] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event12)
[    68.995] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Touchpad (/dev/input/event13)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Touchpad (/dev/input/mouse1)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event14)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.996] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[    68.996] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event18)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse2)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    68.997] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[    68.997] (II) AutoAddDevices is off - not adding device.
[    94.252] (II) NVIDIA(GPU-0): Deleting GPU-0
[    94.252] (II) Server terminated successfully (0). Closing log file.

Here are the graphics-related portions of "lspci -v":

00:02.0 VGA compatible controller: Intel Corporation HD Graphics P530 (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 06e5
	Flags: bus master, fast devsel, latency 0, IRQ 136
	Memory at db000000 (64-bit, non-prefetchable) [size=16M]
	Memory at 70000000 (64-bit, prefetchable) [size=256M]
	I/O ports at f000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

01:00.0 3D controller: NVIDIA Corporation GM107GLM [Quadro M1000M] (rev a2)
	Subsystem: Dell Device 06e5
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
	Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Memory at c0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at e000 [size=128]
	[virtual] Expansion ROM at dd000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia

Thanks in advance for anyone's help!

Last edited by mh605 (2016-12-11 06:35:30)

Offline

#2 2016-12-11 09:55:10

newbie1962
Member
From: italy
Registered: 2012-07-24
Posts: 137

Re: X failure after upgrade from 4.8.6-1-ARCH

because two driver uses, for nvidia card, I would try to remove what you do not use.
if you do not do kernel downgrade

bye

Last edited by newbie1962 (2016-12-11 09:56:37)

hp-envy dv7

Offline

#3 2016-12-11 10:16:30

berbae
Member
From: France
Registered: 2007-02-12
Posts: 1,302

Re: X failure after upgrade from 4.8.6-1-ARCH

You say that the first Xorg.0.log is after the kernel upgrade, but it shows the same current kernel as the other log file:

[     9.710] Current Operating System: Linux michaeldell 4.8.6-1-ARCH #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016 x86_64
and
[    67.992] Current Operating System: Linux michaeldell 4.8.6-1-ARCH #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016 x86_64

Can you explain this please? Did you reboot the machine after the upgrade?

Offline

#4 2016-12-11 21:58:19

PolyWolf
Member
Registered: 2016-12-11
Posts: 1

Re: X failure after upgrade from 4.8.6-1-ARCH

I had a similar problem recently (Dell computer, dual graphics card, near identical crash log). By any chance was 4.8.6-1 the first kernel you had installed?

Offline

Pages: 1

Board footer

Powered by FluxBB