You are not logged in.
- Topics: Active | Unanswered
#1 2017-01-28 14:18:51
- Hering
- Member
- Registered: 2016-05-26
- Posts: 23
Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
Hello,
I have a TechnoTrend TT-connect S2-4600 DVB-S Receiver connected to my computer. Before the kernel update to 4.9 everything worked great but now it stopped working.
Even when I try to rollback to the old kernel and linux-firmware it does not want to react again..
These are my logs:
uname -a
Linux ArchHering 4.9.6-1-ARCH #1 SMP PREEMPT Thu Jan 26 09:22:26 CET 2017 x86_64 GNU/Linuxjournalctl -b | grep -E 'error|except|warn|fail'
kernel: acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
kernel: r8712u: module is from the staging directory, the quality is unknown, you have been warned.
kernel: [<ffffffff8107eb0b>] __warn+0xcb/0xf0
kernel: [<ffffffff8107eb8f>] warn_slowpath_fmt+0x5f/0x80
kernel: dvb-usb: bulk message failed: -11 (2/0)
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (6/0)
kernel: dw2102: i2c transfer failed.
kernel: dvb-usb: bulk message failed: -11 (3/0)
kernel: dw2102: command 0x0e transfer failed.
kernel: dvb-usb: bulk message failed: -11 (3/0)
kernel: dw2102: command 0x0e transfer failed.
kernel: dvb-usb: bulk message failed: -11 (3/0)
kernel: dw2102: command 0x0e transfer failed.
kernel: dvb-usb: bulk message failed: -11 (3/0)
kernel: dw2102: command 0x0e transfer failed.
kernel: dvb-usb: bulk message failed: -11 (1/0)
kernel: dw2102: command 0x51 transfer failed.
kernel: dvb-usb: bulk message failed: -11 (5/0)
kernel: dw2102: i2c transfer failed.
systemd-udevd[230]: worker [254] failed while handling '/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0'
colord[592]: failed to get session [pid 574]: No such device or address
colord[592]: failed to get session [pid 574]: No such device or address
systemd-udevd[585]: Process '/usr/bin/crda' failed with exit code 249.
colord[592]: failed to get session [pid 574]: No such device or address
sddm-greeter[641]: libpng warning: iCCP: known incorrect sRGB profile
kwin_x11[805]: "\"fsrestore1\" - conversion of \"0,0,0,0\" to QRect failed"dmesg | grep dvb
[ 13.600000] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.
[ 13.600025] Modules linked in: dvb_usb_dw2102(+) videobuf2_vmalloc dvb_usb snd_usbmidi_lib dvb_core rc_core videobuf2_memops nf_defrag_ipv6 snd_rawmidi videobuf2_v4l2 videobuf2_core videodev media r8712u(C+) uas input_leds led_class mousedev usb_storage snd_seq_device joydev btusb ipt_REJECT nf_reject_ipv4 xt_comment btrtl intel_rapl x86_pkg_temp_thermal nf_log_ipv4 nf_log_common intel_powerclamp coretemp xt_LOG kvm_intel kvm xt_multiport irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel xt_recent snd_hda_codec_hdmi ppdev fuse aes_x86_64 iTCO_wdt iTCO_vendor_support lrw gf128mul glue_helper evdev mac_hid snd_hda_intel snd_hda_codec ablk_helper snd_ctxfi snd_hda_core snd_hwdep snd_pcm xt_limit hci_uart btbcm btqca cryptd btintel bluetooth snd_timer snd soundcore
[ 13.600266] [<ffffffffa1575c60>] dvb_usb_generic_rw+0xe0/0x1e0 [dvb_usb]
[ 13.600273] [<ffffffffa157c6b4>] su3000_power_ctrl+0x94/0xa0 [dvb_usb_dw2102]
[ 13.600278] [<ffffffffa157552f>] dvb_usb_device_power_ctrl+0x3f/0x50 [dvb_usb]
[ 13.600282] [<ffffffffa1575773>] dvb_usb_device_init+0x233/0x640 [dvb_usb]
[ 13.600293] [<ffffffffa157ccc0>] ? dw2102_rc_query+0xa0/0xa0 [dvb_usb_dw2102]
[ 13.600298] [<ffffffffa157c565>] dw2102_probe+0x355/0x3e0 [dvb_usb_dw2102]
[ 13.600357] [<ffffffffa153001e>] dw2102_driver_init+0x1e/0x1000 [dvb_usb_dw2102]
[ 13.600415] dvb-usb: bulk message failed: -11 (2/0)
[ 13.601994] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.602058] dvb-usb: bulk message failed: -11 (6/0)
[ 13.604777] dvb-usb: bulk message failed: -11 (6/0)
[ 13.608613] dvb-usb: bulk message failed: -11 (6/0)
[ 13.611274] dvb-usb: bulk message failed: -11 (6/0)
[ 13.613935] dvb-usb: bulk message failed: -11 (6/0)
[ 13.616586] dvb-usb: bulk message failed: -11 (6/0)
[ 13.619241] dvb-usb: MAC address: 00:00:00:00:00:00
[ 13.619643] dvb-usb: bulk message failed: -11 (3/0)
[ 13.622549] dvb-usb: bulk message failed: -11 (3/0)
[ 13.950528] dvb-usb: bulk message failed: -11 (3/0)
[ 13.953425] dvb-usb: bulk message failed: -11 (3/0)
[ 13.956099] dvb-usb: bulk message failed: -11 (1/0)
[ 14.185694] dvb-usb: bulk message failed: -11 (5/0)
[ 14.192919] Modules linked in: m88ds3103 i2c_mux xt_hl ip6t_rt nf_conntrack_ipv6 snd_usb_audio uvcvideo dvb_usb_dw2102(+) videobuf2_vmalloc dvb_usb snd_usbmidi_lib dvb_core rc_core videobuf2_memops nf_defrag_ipv6 snd_rawmidi videobuf2_v4l2 videobuf2_core videodev media r8712u(C+) uas input_leds led_class mousedev usb_storage snd_seq_device joydev btusb ipt_REJECT nf_reject_ipv4 xt_comment btrtl intel_rapl x86_pkg_temp_thermal nf_log_ipv4 nf_log_common intel_powerclamp coretemp xt_LOG kvm_intel kvm xt_multiport irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel xt_recent snd_hda_codec_hdmi ppdev fuse aes_x86_64 iTCO_wdt iTCO_vendor_support lrw gf128mul glue_helper evdev mac_hid snd_hda_intel snd_hda_codec ablk_helper snd_ctxfi snd_hda_core snd_hwdep snd_pcm xt_limit
[ 14.241852] [<ffffffffa157d39b>] ? tt_s2_4600_frontend_attach+0x27b/0x420 [dvb_usb_dw2102]
[ 14.242680] [<ffffffffa1576380>] ? dvb_usb_fe_sleep+0x60/0x60 [dvb_usb]
[ 14.243355] [<ffffffffa157671f>] dvb_usb_adapter_frontend_init+0xdf/0x190 [dvb_usb]
[ 14.244151] [<ffffffffa1575a0b>] dvb_usb_device_init+0x4cb/0x640 [dvb_usb]
[ 14.244850] [<ffffffffa157ccc0>] ? dw2102_rc_query+0xa0/0xa0 [dvb_usb_dw2102]
[ 14.245573] [<ffffffffa157c565>] dw2102_probe+0x355/0x3e0 [dvb_usb_dw2102]
[ 14.532575] [<ffffffffa153001e>] dw2102_driver_init+0x1e/0x1000 [dvb_usb_dw2102]lsusb ~
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0b48:3011 TechnoTrend AG TT-connect S2-4600
Bus 001 Device 005: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 001 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 003: ID 046d:082c Logitech, Inc.
Bus 001 Device 002: ID 04a9:1904 Canon, Inc. CanoScan LiDE 100
Bus 001 Device 008: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb -s 008 -vv
#Different device number due to a restart in between and trying to change the usb port
Bus 001 Device 008: ID 0b48:3011 TechnoTrend AG TT-connect S2-4600
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b48 TechnoTrend AG
idProduct 0x3011 TT-connect S2-4600
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 219
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x13f2 3x 1010 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x12d6 3x 726 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x12ae 3x 686 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ca 1x 970 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x02ac 1x 684 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1Neither kaffeine (No Device found) nor w_scan are able to use the receiver anymore. I also tried to replace the driver with the one from AUR but it didnt help either.
Hope someone can help me with it 
Regards,
Hering
P.s.: It still works with Windows so I guess it is not a hardware issue.
Last edited by Hering (2017-01-28 15:40:16)
Offline
#2 2017-01-28 18:35:18
- Glinx
- Member
- Registered: 2010-10-12
- Posts: 34
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
Have a look in your /var/log/pacman.log to see what else got updated with the kernel and rollback that as well.
Offline
#3 2017-01-29 15:34:26
- Hering
- Member
- Registered: 2016-05-26
- Posts: 23
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
Yes, actually I forgot to rollback linux-headers as well. So when I do a rollback of
linux 4.9.6-1 -> linux 4.8.13
linux-headers 4.9.6-1 -> linux-headers 4.8.13
linux-firmware 20161222.4b9559f-2 -> linux-firmware 20161005.9c71af9-1
everything starts working again..
Replacing only the kernel OR the firmware doesn't help.
Last edited by Hering (2017-01-29 15:34:43)
Offline
#4 2017-02-07 18:28:20
- zofiel
- Member
- Registered: 2015-03-27
- Posts: 11
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
Same problem here with a TeVii S482
The workaround works well (Downgrade to 4.8.x). Thanks for the help
Offline
#5 2017-03-12 10:30:10
- zofiel
- Member
- Registered: 2015-03-27
- Posts: 11
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
Any new? with kernel 4.10 the issue is not solverd 
[ 0.000000] Linux version 4.10.1-1-ARCH (builduser@heftig-13232) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Sun Feb 26 21:08:53 UTC 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000009d572fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d573000-0x000000009d5a2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d5a3000-0x000000009d5f6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d5f7000-0x000000009d707fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d708000-0x000000009da7afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009da7b000-0x000000009da7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009da7c000-0x000000009dabdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dabe000-0x000000009dc2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009dc2c000-0x000000009dff9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dffa000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x88b3d018-0x88b4d057] usable ==> usable
[ 0.000000] e820: update [mem 0x88b2f018-0x88b3c057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020100000-0x0000000088b2f017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088b2f018-0x0000000088b3c057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088b3c058-0x0000000088b3d017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088b3d018-0x0000000088b4d057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088b4d058-0x000000009d572fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d573000-0x000000009d5a2fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009d5a3000-0x000000009d5f6fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d5f7000-0x000000009d707fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009d708000-0x000000009da7afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009da7b000-0x000000009da7bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009da7c000-0x000000009dabdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009dabe000-0x000000009dc2bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009dc2c000-0x000000009dff9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009dffa000-0x000000009dffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043fffffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9d67d000 ACPI 2.0=0x9d67d000 SMBIOS=0xf04d0 MPS=0xfd4c0
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900DC-ITX, BIOS P1.50 03/31/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09E000000 mask FFE000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask E00000000 write-back
[ 0.000000] 5 base 400000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9e000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] BRK [0x01d60000, 0x01d60fff] PGTABLE
[ 0.000000] BRK [0x01d61000, 0x01d61fff] PGTABLE
[ 0.000000] BRK [0x01d62000, 0x01d62fff] PGTABLE
[ 0.000000] BRK [0x01d63000, 0x01d63fff] PGTABLE
[ 0.000000] BRK [0x01d64000, 0x01d64fff] PGTABLE
[ 0.000000] BRK [0x01d65000, 0x01d65fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f959000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009D67D000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D67D080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D6882F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20160930/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x000000009D67D1A0 00B158 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000009D707F80 000040
[ 0.000000] ACPI: APIC 0x000000009D688408 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D688490 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009D6884D8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: LPIT 0x000000009D688518 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
[ 0.000000] ACPI: AAFT 0x000000009D688620 000110 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009D688730 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009D688768 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009D688ED0 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000009D689160 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000009D6892E0 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: BGRT 0x000000009D689328 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43ffea000-0x43ffeefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020100000-0x000000009d572fff]
[ 0.000000] node 0: [mem 0x000000009d5a3000-0x000000009d5f6fff]
[ 0.000000] node 0: [mem 0x000000009da7b000-0x000000009da7bfff]
[ 0.000000] node 0: [mem 0x000000009dabe000-0x000000009dc2bfff]
[ 0.000000] node 0: [mem 0x000000009dffa000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
[ 0.000000] On node 0 totalpages: 4052442
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10009 pages used for memmap
[ 0.000000] DMA32 zone: 640572 pages, LIFO batch:31
[ 0.000000] Normal zone: 53248 pages used for memmap
[ 0.000000] Normal zone: 3407872 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics memory at 0x000000009f000000-0x00000000beffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] res edge lint[0x2b])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0xa])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0xfe])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0x6a])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88b2f000-0x88b2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88b3c000-0x88b3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88b3d000-0x88b3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88b4d000-0x88b4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d573000-0x9d5a2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d5f7000-0x9d707fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d708000-0x9da7afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9da7c000-0x9dabdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9dc2c000-0x9dff9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xbeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88043fc00000 s103640 r8192 d31528 u524288
[ 0.000000] pcpu-alloc: s103640 r8192 d31528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3989097
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15548944K/16209768K available (6346K kernel code, 1090K rwdata, 1980K rodata, 1296K init, 1032K bss, 660824K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Detected 1999.200 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.00 BogoMIPS (lpj=6664000)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000062] ACPI: Core revision 20160930
[ 0.017869] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.019137] Security Framework initialized
[ 0.019139] Yama: becoming mindful.
[ 0.020624] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.028286] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.031566] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031595] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032130] CPU: Physical Processor ID: 0
[ 0.032133] CPU: Processor Core ID: 0
[ 0.032138] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.032139] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032147] mce: CPU supports 6 MCE banks
[ 0.032157] CPU0: Thermal monitoring enabled (TM1)
[ 0.032161] process: using mwait in idle threads
[ 0.032166] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.032168] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.032437] Freeing SMP alternatives memory: 24K
[ 0.056529] ftrace: allocating 25109 entries in 99 pages
[ 0.076695] smpboot: Max logical packages: 1
[ 0.077424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.110450] TSC deadline timer enabled
[ 0.110454] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.120496] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.120520] ... version: 3
[ 0.120522] ... bit width: 40
[ 0.120523] ... generic registers: 2
[ 0.120525] ... value mask: 000000ffffffffff
[ 0.120527] ... max period: 0000007fffffffff
[ 0.120528] ... fixed-purpose events: 3
[ 0.120530] ... event mask: 0000000700000003
[ 0.144243] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.150690] smp: Bringing up secondary CPUs ...
[ 0.177469] x86: Booting SMP configuration:
[ 0.177472] .... node #0, CPUs: #1 #2 #3
[ 0.481332] smp: Brought up 1 node, 4 CPUs
[ 0.481337] smpboot: Total of 4 processors activated (16009.14 BogoMIPS)
[ 0.484069] devtmpfs: initialized
[ 0.484192] x86/mm: Memory block size: 128MB
[ 0.494276] PM: Registering ACPI NVS region [mem 0x9d5f7000-0x9d707fff] (1118208 bytes)
[ 0.494316] reboot: ASRock Q1900DC-ITX series board detected. Selecting PCI-method for reboots.
[ 0.494439] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.494453] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.494561] pinctrl core: initialized pinctrl subsystem
[ 0.494632] RTC time: 10:25:43, date: 03/12/17
[ 0.494840] NET: Registered protocol family 16
[ 0.504542] cpuidle: using governor ladder
[ 0.517899] cpuidle: using governor menu
[ 0.517903] PCCT header not found.
[ 0.518008] ACPI: bus type PCI registered
[ 0.518017] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.518152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.518156] PCI: not using MMCONFIG
[ 0.518159] PCI: Using configuration type 1 for base access
[ 0.528248] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.528931] ACPI: Added _OSI(Module Device)
[ 0.528933] ACPI: Added _OSI(Processor Device)
[ 0.528934] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.528936] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.540545] ACPI: Dynamic OEM Table Load:
[ 0.540556] ACPI: SSDT 0xFFFF88042D9B4400 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.540973] ACPI: Dynamic OEM Table Load:
[ 0.540981] ACPI: SSDT 0xFFFF88042D9B7C00 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.541972] ACPI: Dynamic OEM Table Load:
[ 0.541980] ACPI: SSDT 0xFFFF88042D92C800 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.542380] ACPI: Dynamic OEM Table Load:
[ 0.542389] ACPI: SSDT 0xFFFF88042D9AC840 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.545295] ACPI: Interpreter enabled
[ 0.545335] ACPI: (supports S0 S3 S4 S5)
[ 0.545337] ACPI: Using IOAPIC for interrupt routing
[ 0.545481] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.546814] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.546846] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.769880] ACPI: Power Resource [USBC] (on)
[ 0.771809] ACPI: Power Resource [PLPE] (on)
[ 0.772197] ACPI: Power Resource [PLPE] (on)
[ 0.781993] ACPI: Power Resource [CLK0] (on)
[ 0.782084] ACPI: Power Resource [CLK1] (on)
[ 0.864743] ACPI: Power Resource [FN00] (off)
[ 0.866419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.866428] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.866728] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.867478] PCI host bridge to bus 0000:00
[ 0.867483] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.867486] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.867488] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.867491] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.867494] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.867496] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.867499] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.867501] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0915ffe window]
[ 0.867504] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.867516] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.867762] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.867776] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.867788] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.867799] pci 0000:00:02.0: reg 0x20: [io 0xf020-0xf027]
[ 0.868039] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.868058] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit]
[ 0.868123] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.868280] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.868379] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.868415] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.868430] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.868541] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.868743] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.868766] pci 0000:00:1b.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit]
[ 0.868843] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.869037] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.869103] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.869304] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.869369] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.869570] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.869635] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.869845] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.869910] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.870115] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.870378] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.870413] pci 0000:00:1f.3: reg 0x10: [mem 0xd0914000-0xd091401f]
[ 0.870485] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.870873] pci 0000:01:00.0: [9710:9990] type 00 class 0x0c0310
[ 0.870898] pci 0000:01:00.0: reg 0x10: [mem 0xd0807000-0xd0807fff]
[ 0.871049] pci 0000:01:00.0: supports D1 D2
[ 0.871052] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.871114] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.871200] pci 0000:01:00.1: [9710:9990] type 00 class 0x0c0320
[ 0.871225] pci 0000:01:00.1: reg 0x10: [mem 0xd0806000-0xd0806fff]
[ 0.871371] pci 0000:01:00.1: supports D1 D2
[ 0.871374] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.871501] pci 0000:01:00.2: [9710:9990] type 00 class 0x0c0310
[ 0.871526] pci 0000:01:00.2: reg 0x10: [mem 0xd0805000-0xd0805fff]
[ 0.871672] pci 0000:01:00.2: supports D1 D2
[ 0.871675] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.871814] pci 0000:01:00.3: [9710:9990] type 00 class 0x0c0320
[ 0.871839] pci 0000:01:00.3: reg 0x10: [mem 0xd0804000-0xd0804fff]
[ 0.871985] pci 0000:01:00.3: supports D1 D2
[ 0.871987] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.872114] pci 0000:01:00.4: [9710:9990] type 00 class 0x0c0310
[ 0.872138] pci 0000:01:00.4: reg 0x10: [mem 0xd0803000-0xd0803fff]
[ 0.872284] pci 0000:01:00.4: supports D1 D2
[ 0.872287] pci 0000:01:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.872413] pci 0000:01:00.5: [9710:9990] type 00 class 0x0c0320
[ 0.872438] pci 0000:01:00.5: reg 0x10: [mem 0xd0802000-0xd0802fff]
[ 0.872584] pci 0000:01:00.5: supports D1 D2
[ 0.872587] pci 0000:01:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.872722] pci 0000:01:00.6: [9710:9990] type 00 class 0x0c0310
[ 0.872747] pci 0000:01:00.6: reg 0x10: [mem 0xd0801000-0xd0801fff]
[ 0.872893] pci 0000:01:00.6: supports D1 D2
[ 0.872895] pci 0000:01:00.6: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.873022] pci 0000:01:00.7: [9710:9990] type 00 class 0x0c0320
[ 0.873047] pci 0000:01:00.7: reg 0x10: [mem 0xd0800000-0xd0800fff]
[ 0.873194] pci 0000:01:00.7: supports D1 D2
[ 0.873196] pci 0000:01:00.7: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.873350] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.873357] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
[ 0.873462] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.873578] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.873599] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.873628] pci 0000:03:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
[ 0.873646] pci 0000:03:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref]
[ 0.873741] pci 0000:03:00.0: supports D1 D2
[ 0.873744] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.873823] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.881784] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.881791] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.881797] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
[ 0.881954] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[ 0.881981] pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.881993] pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.882004] pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.882016] pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.882028] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.882040] pci 0000:04:00.0: reg 0x24: [mem 0xd0600000-0xd06001ff]
[ 0.882170] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.882245] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.882249] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.882253] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.989082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.989217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.989350] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.989484] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.989617] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.989749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.989887] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.990025] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.992584] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.992936] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.992940] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.992949] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.992950] vgaarb: loaded
[ 0.993068] Registered efivars operations
[ 0.998315] PCI: Using ACPI for IRQ routing
[ 1.004343] PCI: pci_cache_line_size set to 64 bytes
[ 1.004421] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.004424] e820: reserve RAM buffer [mem 0x88b2f018-0x8bffffff]
[ 1.004426] e820: reserve RAM buffer [mem 0x88b3d018-0x8bffffff]
[ 1.004428] e820: reserve RAM buffer [mem 0x9d573000-0x9fffffff]
[ 1.004430] e820: reserve RAM buffer [mem 0x9d5f7000-0x9fffffff]
[ 1.004432] e820: reserve RAM buffer [mem 0x9da7c000-0x9fffffff]
[ 1.004434] e820: reserve RAM buffer [mem 0x9dc2c000-0x9fffffff]
[ 1.004436] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 1.004622] NetLabel: Initializing
[ 1.004624] NetLabel: domain hash size = 128
[ 1.004625] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.004654] NetLabel: unlabeled traffic allowed by default
[ 1.005296] clocksource: Switched to clocksource refined-jiffies
[ 1.017921] VFS: Disk quotas dquot_6.6.0
[ 1.017954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.018130] pnp: PnP ACPI init
[ 1.018244] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.018510] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.018513] system 00:01: [io 0x0400-0x047f] has been reserved
[ 1.018516] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 1.018523] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.018750] system 00:02: [io 0x0290-0x029f] has been reserved
[ 1.018756] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.019385] pnp 00:03: [dma 3]
[ 1.019616] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active)
[ 1.019979] pnp 00:04: [dma 0 disabled]
[ 1.020084] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.126070] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.126074] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.126077] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.126080] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 1.126083] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 1.126086] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 1.126089] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.126092] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.126095] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 1.126101] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.128312] pnp: PnP ACPI: found 6 devices
[ 1.136799] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.136826] clocksource: Switched to clocksource acpi_pm
[ 1.136849] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.136855] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1.136864] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1.136868] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1.136871] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 1.136880] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1.136889] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 1.136905] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136908] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136911] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.136914] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1.136918] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136921] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136924] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136927] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136930] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136934] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.136937] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.136940] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.136943] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.136946] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.136959] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.136962] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.136967] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[ 1.136970] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[ 1.136978] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.136980] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.136988] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.136990] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.136998] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.137000] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.137006] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.137010] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.137021] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.137023] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.137031] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.137034] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.137038] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[ 1.137041] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[ 1.137048] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.137051] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.137058] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 1.137061] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 1.137067] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.137071] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.137076] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
[ 1.137084] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.137087] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.137097] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.137100] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.137105] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
[ 1.137112] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.137115] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.137120] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.137128] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.137131] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 1.137133] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 1.137136] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.137138] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.137141] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.137143] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 1.137146] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0915ffe window]
[ 1.137149] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.137151] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[ 1.137154] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.137157] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.137159] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[ 1.137162] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.137165] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
[ 1.137338] NET: Registered protocol family 2
[ 1.137683] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.138136] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.138453] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.138541] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.138683] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.138897] NET: Registered protocol family 1
[ 1.138925] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.140605] PCI: CLS 64 bytes, default 64
[ 1.140708] Unpacking initramfs...
[ 1.294772] Freeing initrd memory: 6808K
[ 1.294778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.294783] software IO TLB [mem 0x84b2f000-0x88b2f000] (64MB) mapped at [ffff880084b2f000-ffff880088b2efff]
[ 1.294831] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a275294b2, max_idle_ns: 881590412759 ns
[ 1.294883] clocksource: Switched to clocksource tsc
[ 1.295102] Scanning for low memory corruption every 60 seconds
[ 1.296356] Initialise system trusted keyrings
[ 1.296521] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.299806] zbud: loaded
[ 1.301098] Key type asymmetric registered
[ 1.301181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.301240] io scheduler noop registered
[ 1.301242] io scheduler deadline registered
[ 1.301257] io scheduler cfq registered (default)
[ 1.302191] efifb: probing for efifb
[ 1.302210] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 1.302212] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.302213] efifb: scrolling: redraw
[ 1.302215] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.307291] Console: switching to colour frame buffer device 128x48
[ 1.312068] fb0: EFI VGA frame buffer device
[ 1.312083] intel_idle: MWAIT substates: 0x33000020
[ 1.312085] intel_idle: v0.4.1 model 0x37
[ 1.312558] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.315539] GHES: HEST is not enabled!
[ 1.315688] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.336470] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.337155] hpet: number irqs doesn't agree with number of timers
[ 1.337205] Linux agpgart interface v0.103
[ 1.337937] rtc_cmos 00:00: RTC can wake from S4
[ 1.338103] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.338135] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 1.338153] intel_pstate: Intel P-state driver initializing
[ 1.338404] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.338972] NET: Registered protocol family 10
[ 1.347986] Segment Routing with IPv6
[ 1.348041] NET: Registered protocol family 17
[ 1.348740] microcode: sig=0x30678, pf=0x4, revision=0x831
[ 1.348882] microcode: Microcode Update Driver: v2.2.
[ 1.349252] registered taskstats version 1
[ 1.349270] Loading compiled-in X.509 certificates
[ 1.349315] zswap: loaded using pool lzo/zbud
[ 1.350029] Magic number: 9:316:426
[ 1.350219] rtc_cmos 00:00: setting system clock to 2017-03-12 10:25:43 UTC (1489314343)
[ 1.350433] PM: Hibernation image not present or could not be loaded.
[ 1.353841] Freeing unused kernel memory: 1296K
[ 1.353844] Write protecting the kernel read-only data: 10240k
[ 1.354871] Freeing unused kernel memory: 1832K
[ 1.355265] Freeing unused kernel memory: 68K
[ 1.377445] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.382554] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.382723] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.385637] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.385708] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.398412] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.398471] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.398499] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.399045] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.399108] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.463667] sdhci: Secure Digital Host Controller Interface driver
[ 1.463669] sdhci: Copyright(c) Pierre Ossman
[ 1.474741] i8042: PNP: No PS/2 controller found.
[ 1.487451] ACPI: bus type USB registered
[ 1.487493] usbcore: registered new interface driver usbfs
[ 1.487512] usbcore: registered new interface driver hub
[ 1.487563] usbcore: registered new device driver usb
[ 1.488277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.488902] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.488905] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.489353] ehci-pci: EHCI PCI platform driver
[ 1.489534] ehci-pci 0000:01:00.1: EHCI Host Controller
[ 1.489544] ehci-pci 0000:01:00.1: new USB bus registered, assigned bus number 1
[ 1.489551] ehci-pci 0000:01:00.1: applying MosChip frame-index workaround
[ 1.489633] ehci-pci 0000:01:00.1: irq 16, io mem 0xd0806000
[ 1.500310] ehci-pci 0000:01:00.1: USB 2.0 started, EHCI 1.00
[ 1.500627] hub 1-0:1.0: USB hub found
[ 1.500642] hub 1-0:1.0: 1 port detected
[ 1.500816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.500826] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.501926] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.501931] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.502451] hub 2-0:1.0: USB hub found
[ 1.502468] hub 2-0:1.0: 6 ports detected
[ 1.503282] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.503288] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.503311] ehci-pci 0000:01:00.3: EHCI Host Controller
[ 1.503947] hub 3-0:1.0: USB hub found
[ 1.503962] hub 3-0:1.0: 1 port detected
[ 1.504372] ehci-pci 0000:01:00.3: new USB bus registered, assigned bus number 4
[ 1.504378] ehci-pci 0000:01:00.3: applying MosChip frame-index workaround
[ 1.504455] ehci-pci 0000:01:00.3: irq 17, io mem 0xd0804000
[ 1.504759] SCSI subsystem initialized
[ 1.504785] i8042: PNP: No PS/2 controller found.
[ 1.509691] libata version 3.00 loaded.
[ 1.511007] ahci 0000:04:00.0: version 3.0
[ 1.511230] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
[ 1.511263] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.511266] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.511860] scsi host0: ahci
[ 1.512063] scsi host1: ahci
[ 1.512163] ata1: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600100 irq 88
[ 1.512166] ata2: SATA max UDMA/133 abar m512@0xd0600000 port 0xd0600180 irq 88
[ 1.516928] ehci-pci 0000:01:00.3: USB 2.0 started, EHCI 1.00
[ 1.517341] hub 4-0:1.0: USB hub found
[ 1.517356] hub 4-0:1.0: 1 port detected
[ 1.517678] ehci-pci 0000:01:00.5: EHCI Host Controller
[ 1.517688] ehci-pci 0000:01:00.5: new USB bus registered, assigned bus number 5
[ 1.517694] ehci-pci 0000:01:00.5: applying MosChip frame-index workaround
[ 1.517774] ehci-pci 0000:01:00.5: irq 18, io mem 0xd0802000
[ 1.533596] ehci-pci 0000:01:00.5: USB 2.0 started, EHCI 1.00
[ 1.533962] hub 5-0:1.0: USB hub found
[ 1.533979] hub 5-0:1.0: 1 port detected
[ 1.534323] ehci-pci 0000:01:00.7: EHCI Host Controller
[ 1.534334] ehci-pci 0000:01:00.7: new USB bus registered, assigned bus number 6
[ 1.534339] ehci-pci 0000:01:00.7: applying MosChip frame-index workaround
[ 1.534417] ehci-pci 0000:01:00.7: irq 19, io mem 0xd0800000
[ 1.546916] ehci-pci 0000:01:00.7: USB 2.0 started, EHCI 1.00
[ 1.547334] hub 6-0:1.0: USB hub found
[ 1.547353] hub 6-0:1.0: 1 port detected
[ 1.548082] ohci-pci: OHCI PCI platform driver
[ 1.548252] ohci-pci 0000:01:00.0: OHCI PCI host controller
[ 1.548277] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 7
[ 1.548324] ohci-pci 0000:01:00.0: irq 16, io mem 0xd0807000
[ 1.608113] hub 7-0:1.0: USB hub found
[ 1.608141] hub 7-0:1.0: 1 port detected
[ 1.608595] ohci-pci 0000:01:00.2: OHCI PCI host controller
[ 1.608610] ohci-pci 0000:01:00.2: new USB bus registered, assigned bus number 8
[ 1.608658] ohci-pci 0000:01:00.2: irq 17, io mem 0xd0805000
[ 1.668060] hub 8-0:1.0: USB hub found
[ 1.668092] hub 8-0:1.0: 1 port detected
[ 1.668498] ohci-pci 0000:01:00.4: OHCI PCI host controller
[ 1.668518] ohci-pci 0000:01:00.4: new USB bus registered, assigned bus number 9
[ 1.668559] ohci-pci 0000:01:00.4: irq 18, io mem 0xd0803000
[ 1.728056] hub 9-0:1.0: USB hub found
[ 1.728082] hub 9-0:1.0: 1 port detected
[ 1.728484] ohci-pci 0000:01:00.6: OHCI PCI host controller
[ 1.728498] ohci-pci 0000:01:00.6: new USB bus registered, assigned bus number 10
[ 1.728588] ohci-pci 0000:01:00.6: irq 19, io mem 0xd0801000
[ 1.788057] hub 10-0:1.0: USB hub found
[ 1.788083] hub 10-0:1.0: 1 port detected
[ 1.820256] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.820261] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.843591] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.952510] hub 2-1:1.0: USB hub found
[ 1.952677] hub 2-1:1.0: 4 ports detected
[ 1.980270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.981508] ata1.00: NCQ Send/Recv Log not supported
[ 1.981513] ata1.00: ATA-9: SAMSUNG MZ7PD128HCFV-000H1, DXM01H0Q, max UDMA/133
[ 1.981517] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.982079] ata1.00: NCQ Send/Recv Log not supported
[ 1.982374] ata1.00: configured for UDMA/133
[ 1.982783] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PD128 1H0Q PQ: 0 ANSI: 5
[ 2.063671] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.082911] hub 3-1:1.0: USB hub found
[ 2.083048] hub 3-1:1.0: 4 ports detected
[ 2.193594] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 2.325863] hub 2-2:1.0: USB hub found
[ 2.326108] hub 2-2:1.0: 3 ports detected
[ 2.440257] usb 2-3: new full-speed USB device number 4 using xhci_hcd
[ 2.503603] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.504171] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 2.504176] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.504778] ata2.00: configured for UDMA/133
[ 2.505164] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 2.544127] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.544136] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.544141] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.544174] sd 0:0:0:0: [sda] Write Protect is off
[ 2.544179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.544185] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.544190] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.544259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.544269] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.547228] sda: sda1 sda2 sda3
[ 2.547932] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.580993] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.585076] usbcore: registered new interface driver usbhid
[ 2.585079] usbhid: USB HID core driver
[ 2.586505] input: Usb Audio device Usb Audio device as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.2/0003:2319:00B2.0001/input/input0
[ 2.588840] sdb: sdb1
[ 2.589674] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.595267] random: fast init done
[ 2.640402] hid-generic 0003:2319:00B2.0001: input,hidraw0: USB HID v2.00 Mouse [Usb Audio device Usb Audio device] on usb-0000:00:14.0-3/input2
[ 2.640807] input: Usb Audio device Usb Audio device as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.3/0003:2319:00B2.0002/input/input1
[ 2.697068] hid-generic 0003:2319:00B2.0002: input,hidraw1: USB HID v2.00 Keyboard [Usb Audio device Usb Audio device] on usb-0000:00:14.0-3/input3
[ 2.824078] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.903926] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.920158] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.920480] systemd[1]: Detected architecture x86-64.
[ 2.921164] systemd[1]: Set hostname to <pcsalon>.
[ 3.019298] systemd[1]: Created slice User and Session Slice.
[ 3.023174] systemd[1]: Reached target Swap.
[ 3.023397] systemd[1]: Listening on udev Control Socket.
[ 3.023654] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.023935] systemd[1]: Listening on Journal Socket.
[ 3.024154] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.024402] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.049082] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.061362] RPC: Registered named UNIX socket transport module.
[ 3.061363] RPC: Registered udp transport module.
[ 3.061364] RPC: Registered tcp transport module.
[ 3.061365] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.108737] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 3.229242] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.229248] ACPI: Power Button [PWRB]
[ 3.230924] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.230931] ACPI: Sleep Button [SLPB]
[ 3.231038] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.231041] ACPI: Power Button [PWRF]
[ 3.256313] systemd-journald[164]: Received request to flush runtime journal from PID 1
[ 3.286033] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.287739] parport_pc 00:03: reported by Plug and Play ACPI
[ 3.287831] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[ 3.294146] i8042: PNP: No PS/2 controller found.
[ 3.303325] Bluetooth: Core ver 2.22
[ 3.303354] NET: Registered protocol family 31
[ 3.303356] Bluetooth: HCI device and connection manager initialized
[ 3.303362] Bluetooth: HCI socket layer initialized
[ 3.303381] Bluetooth: L2CAP socket layer initialized
[ 3.303392] Bluetooth: SCO socket layer initialized
[ 3.314908] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.315126] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.315128] ACPI: Thermal Zone [TZ01] (27 C)
[ 3.331157] i8042: PNP: No PS/2 controller found.
[ 3.332996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.344940] Bluetooth: HCI UART driver ver 2.3
[ 3.344943] Bluetooth: HCI UART protocol H4 registered
[ 3.344944] Bluetooth: HCI UART protocol BCSP registered
[ 3.344945] Bluetooth: HCI UART protocol LL registered
[ 3.344946] Bluetooth: HCI UART protocol ATH3K registered
[ 3.344952] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.344995] Bluetooth: HCI UART protocol Intel registered
[ 3.345017] Bluetooth: HCI UART protocol Broadcom registered
[ 3.345018] Bluetooth: HCI UART protocol QCA registered
[ 3.345019] Bluetooth: HCI UART protocol AG6XX registered
[ 3.345020] Bluetooth: HCI UART protocol Marvell registered
[ 3.349965] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 3.349968] mei_txe 0000:00:1a.0: PCI INT A: not connected
[ 3.374014] mousedev: PS/2 mouse device common for all mice
[ 3.386181] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.397989] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.405867] dw2102: su3000_identify_state
[ 3.405870] dvb-usb: found a 'TeVii S482 (tuner 1)' in warm state.
[ 3.405878] dw2102: su3000_power_ctrl: 1, initialized 0
[ 3.405883] ------------[ cut here ]------------
[ 3.405894] WARNING: CPU: 1 PID: 209 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x42a/0x550 [usbcore]
[ 3.405895] transfer buffer not dma capable
[ 3.405896] Modules linked in: dvb_usb_dw2102(+) dvb_usb snd_usbmidi_lib pcspkr dvb_core snd_rawmidi input_leds mii rc_core snd_intel_sst_acpi snd_seq_device snd_intel_sst_core snd_soc_rt5645 intel_gtt i2c_i801(+) evdev snd_soc_rt5640 joydev mousedev syscopyarea mei_txe mac_hid hci_uart snd_soc_rl6231 sysfillrect snd_hda_core btbcm sysimgblt snd_soc_sst_mfld_platform fb_sys_fops btqca i2c_algo_bit mei snd_hwdep snd_soc_sst_match shpchp lpc_ich btintel thermal fan snd_soc_core bluetooth snd_compress snd_pcm_dmaengine snd_pcm parport_pc battery rfkill_gpio snd_timer parport video fjes rfkill snd i2c_hid soundcore ac97_bus i2c_designware_platform i2c_designware_core spi_pxa2xx_platform 8250_dw button tpm_tis tpm_tis_core tpm sch_fq_codel nfsd auth_rpcgss oid_registry cpufreq_powersave nfs_acl lockd
[ 3.405956] grace sunrpc ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache hid_generic usbhid hid sd_mod ohci_pci ahci libahci libata scsi_mod xhci_pci ehci_pci xhci_hcd ehci_hcd ohci_hcd usbcore usb_common serio sdhci_acpi sdhci led_class mmc_core
[ 3.408766] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.408781] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.408807] CPU: 1 PID: 209 Comm: systemd-udevd Not tainted 4.10.1-1-ARCH #1
[ 3.408809] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900DC-ITX, BIOS P1.50 03/31/2016
[ 3.408810] Call Trace:
[ 3.408821] dump_stack+0x63/0x83
[ 3.408825] __warn+0xcb/0xf0
[ 3.408828] warn_slowpath_fmt+0x5f/0x80
[ 3.408832] ? mempool_alloc_slab+0x15/0x20
[ 3.408841] ? usb_alloc_urb+0x19/0x50 [usbcore]
[ 3.408847] usb_hcd_map_urb_for_dma+0x42a/0x550 [usbcore]
[ 3.408853] usb_hcd_submit_urb+0x335/0xb30 [usbcore]
[ 3.408860] usb_submit_urb+0x2f6/0x570 [usbcore]
[ 3.408863] ? up+0x32/0x50
[ 3.408869] usb_start_wait_urb+0x6e/0x170 [usbcore]
[ 3.408875] usb_bulk_msg+0xbd/0x160 [usbcore]
[ 3.408880] dvb_usb_generic_rw+0xe0/0x1e0 [dvb_usb]
[ 3.408888] su3000_power_ctrl+0x94/0xa0 [dvb_usb_dw2102]
[ 3.408890] dvb_usb_device_power_ctrl+0x3f/0x50 [dvb_usb]
[ 3.408893] dvb_usb_device_init+0x233/0x640 [dvb_usb]
[ 3.408896] ? __kmalloc_track_caller+0x31/0x210
[ 3.408900] ? dw2102_rc_query+0xa0/0xa0 [dvb_usb_dw2102]
[ 3.408904] dw2102_probe+0x355/0x3e0 [dvb_usb_dw2102]
[ 3.408910] usb_probe_interface+0x159/0x2d0 [usbcore]
[ 3.408914] driver_probe_device+0x2bb/0x460
[ 3.408916] __driver_attach+0xdf/0xf0
[ 3.408918] ? driver_probe_device+0x460/0x460
[ 3.408922] bus_for_each_dev+0x6c/0xc0
[ 3.408924] driver_attach+0x1e/0x20
[ 3.408926] bus_add_driver+0x170/0x270
[ 3.408928] driver_register+0x60/0xe0
[ 3.408934] usb_register_driver+0x81/0x140 [usbcore]
[ 3.408936] ? 0xffffffffa0472000
[ 3.408940] dw2102_driver_init+0x1e/0x1000 [dvb_usb_dw2102]
[ 3.408943] do_one_initcall+0x52/0x1a0
[ 3.408946] do_init_module+0x5f/0x201
[ 3.408949] load_module+0x2389/0x2a70
[ 3.408952] ? symbol_put_addr+0x50/0x50
[ 3.408954] ? vmap_page_range_noflush+0x25a/0x350
[ 3.408958] SyS_init_module+0x174/0x190
[ 3.408960] do_syscall_64+0x54/0xc0
[ 3.408963] entry_SYSCALL64_slow_path+0x25/0x25
[ 3.408965] RIP: 0033:0x7fcb179f9b0a
[ 3.408967] RSP: 002b:00007ffdc5be4618 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 3.408969] RAX: ffffffffffffffda RBX: 000055844768a670 RCX: 00007fcb179f9b0a
[ 3.408971] RDX: 00007fcb180e7cb5 RSI: 0000000000016400 RDI: 00005584482d8710
[ 3.408972] RBP: 00007fcb180e7cb5 R08: 0000000000000076 R09: 0000000000000073
[ 3.408973] R10: 0000000000000000 R11: 0000000000000246 R12: 00005584482d8710
[ 3.408974] R13: 0000558447691a70 R14: 0000000000020000 R15: 0000558446470622
[ 3.408976] ---[ end trace 79a08732531ffe4c ]---
[ 3.408980] dvb-usb: bulk message failed: -11 (2/0)
[ 3.411747] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.412112] dvbdev: DVB: registering new adapter (TeVii S482 (tuner 1))
[ 3.412117] dvb-usb: bulk message failed: -11 (6/0)
[ 3.414532] dw2102: i2c transfer failed.
[ 3.417589] dvb-usb: bulk message failed: -11 (6/0)
[ 3.420285] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90001979000, d0:50:99:37:d2:e5, XID 0c000800 IRQ 90
[ 3.420288] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.422188] dw2102: i2c transfer failed.
[ 3.425616] dvb-usb: bulk message failed: -11 (6/0)
[ 3.425617] dw2102: i2c transfer failed.
[ 3.425624] dvb-usb: bulk message failed: -11 (6/0)
[ 3.425625] dw2102: i2c transfer failed.
[ 3.425626] dvb-usb: bulk message failed: -11 (6/0)
[ 3.425626] dw2102: i2c transfer failed.
[ 3.425628] dvb-usb: bulk message failed: -11 (6/0)
[ 3.425628] dw2102: i2c transfer failed.
[ 3.425630] dvb-usb: MAC address: 00:00:00:00:00:00
[ 3.426498] dvb-usb: bulk message failed: -11 (3/0)
[ 3.426499] dw2102: command 0x0e transfer failed.
[ 3.426500] dvb-usb: bulk message failed: -11 (3/0)
[ 3.426501] dw2102: command 0x0e transfer failed.
[ 3.431592] usbcore: registered new interface driver snd-usb-audio
[ 3.491314] [drm] Initialized
[ 3.519654] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.570142] ppdev: user-space parallel port driver
[ 3.571113] iTCO_vendor_support: vendor-support=0
[ 3.572200] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.572274] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 3.572782] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.587696] [drm] Memory usable by graphics device = 2048M
[ 3.587701] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 3.587703] fb: switching to inteldrmfb from EFI VGA
[ 3.587739] Console: switching to colour dummy device 80x25
[ 3.587845] [drm] Replacing VGA console driver
[ 3.588251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.588252] [drm] Driver supports precise vblank timestamp query.
[ 3.588793] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.595794] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.596681] acpi device:09: registered as cooling_device5
[ 3.596788] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.597053] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.597066] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[ 3.600336] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 3.602622] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.602722] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.602800] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 3.607705] intel_rapl: Found RAPL domain package
[ 3.607708] intel_rapl: Found RAPL domain core
[ 3.733599] dvb-usb: bulk message failed: -11 (3/0)
[ 3.733614] dw2102: command 0x0e transfer failed.
[ 3.733623] dvb-usb: bulk message failed: -11 (3/0)
[ 3.733630] dw2102: command 0x0e transfer failed.
[ 3.733637] dvb-usb: bulk message failed: -11 (1/0)
[ 3.733644] dw2102: command 0x51 transfer failed.
[ 3.738233] dvb-usb: bulk message failed: -11 (5/0)
[ 3.738245] dw2102: i2c transfer failed.
[ 3.738306] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3.738320] IP: (null)
[ 3.738327] PGD 0
[ 3.738338] Oops: 0010 [#1] PREEMPT SMP
[ 3.738345] Modules linked in: m88ds3103 i2c_mux intel_rapl intel_soc_dts_iosf intel_powerclamp coretemp kvm_intel iTCO_wdt i915 iTCO_vendor_support ppdev kvm snd_hda_intel drm_kms_helper irqbypass crct10dif_pclmul nls_iso8859_1 crc32_pclmul crc32c_intel nls_cp437 vfat fat ghash_clmulni_intel cryptd intel_cstate r8169 dvb_usb_dw2102(+) snd_usb_audio dvb_usb snd_usbmidi_lib pcspkr dvb_core drm snd_rawmidi input_leds mii rc_core snd_intel_sst_acpi snd_seq_device snd_intel_sst_core snd_soc_rt5645 snd_hda_codec intel_gtt i2c_i801 evdev snd_soc_rt5640 joydev mousedev syscopyarea mei_txe mac_hid hci_uart snd_soc_rl6231 sysfillrect snd_hda_core btbcm sysimgblt snd_soc_sst_mfld_platform fb_sys_fops btqca i2c_algo_bit mei snd_hwdep snd_soc_sst_match shpchp lpc_ich btintel thermal fan snd_soc_core bluetooth
[ 3.738446] snd_compress snd_pcm_dmaengine snd_pcm parport_pc battery rfkill_gpio snd_timer parport video fjes rfkill snd i2c_hid soundcore ac97_bus i2c_designware_platform i2c_designware_core spi_pxa2xx_platform 8250_dw button tpm_tis tpm_tis_core tpm sch_fq_codel nfsd auth_rpcgss oid_registry cpufreq_powersave nfs_acl lockd grace sunrpc ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache hid_generic usbhid hid sd_mod ohci_pci ahci libahci libata scsi_mod xhci_pci ehci_pci xhci_hcd ehci_hcd ohci_hcd usbcore usb_common serio sdhci_acpi sdhci led_class mmc_core
[ 3.738528] CPU: 1 PID: 209 Comm: systemd-udevd Tainted: G W 4.10.1-1-ARCH #1
[ 3.738538] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900DC-ITX, BIOS P1.50 03/31/2016
[ 3.738549] task: ffff88042be13400 task.stack: ffffc90001f78000
[ 3.738556] RIP: 0010: (null)
[ 3.738563] RSP: 0018:ffffc90001f7b938 EFLAGS: 00010202
[ 3.738570] RAX: 0000000000000001 RBX: ffffc90001f7b998 RCX: 0000000000000001
[ 3.738578] RDX: 0000000000000001 RSI: ffffffffa06c0380 RDI: ffff88042ca3a400
[ 3.738586] RBP: ffffc90001f7ba10 R08: 0000000000000000 R09: ffff88043fc981a8
[ 3.738593] R10: 0000000000010824 R11: 0000000000000000 R12: ffff88042ced92f8
[ 3.738601] R13: ffff88042ca3a400 R14: ffff88042ce56ec0 R15: 0000000000000000
[ 3.738609] FS: 00007fcb1893e5c0(0000) GS:ffff88043fc80000(0000) knlGS:0000000000000000
[ 3.738619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.738626] CR2: 0000000000000000 CR3: 000000042c434000 CR4: 00000000001006e0
[ 3.738634] Call Trace:
[ 3.738649] ? tt_s2_4600_frontend_attach+0x27b/0x420 [dvb_usb_dw2102]
[ 3.738661] ? dvb_usb_fe_sleep+0x60/0x60 [dvb_usb]
[ 3.738669] dvb_usb_adapter_frontend_init+0xdf/0x190 [dvb_usb]
[ 3.738679] dvb_usb_device_init+0x4cb/0x640 [dvb_usb]
[ 3.738689] ? dw2102_rc_query+0xa0/0xa0 [dvb_usb_dw2102]
[ 3.738699] dw2102_probe+0x355/0x3e0 [dvb_usb_dw2102]
[ 3.738712] usb_probe_interface+0x159/0x2d0 [usbcore]
[ 3.738724] driver_probe_device+0x2bb/0x460
[ 3.738732] __driver_attach+0xdf/0xf0
[ 3.738740] ? driver_probe_device+0x460/0x460
[ 3.738748] bus_for_each_dev+0x6c/0xc0
[ 3.738756] driver_attach+0x1e/0x20
[ 3.738763] bus_add_driver+0x170/0x270
[ 3.738770] driver_register+0x60/0xe0
[ 3.738782] usb_register_driver+0x81/0x140 [usbcore]
[ 3.738790] ? 0xffffffffa0472000
[ 3.738799] dw2102_driver_init+0x1e/0x1000 [dvb_usb_dw2102]
[ 3.738807] do_one_initcall+0x52/0x1a0
[ 3.738816] do_init_module+0x5f/0x201
[ 3.738825] load_module+0x2389/0x2a70
[ 3.738832] ? symbol_put_addr+0x50/0x50
[ 3.738841] ? vmap_page_range_noflush+0x25a/0x350
[ 3.738850] SyS_init_module+0x174/0x190
[ 3.738858] do_syscall_64+0x54/0xc0
[ 3.738865] entry_SYSCALL64_slow_path+0x25/0x25
[ 3.738872] RIP: 0033:0x7fcb179f9b0a
[ 3.738879] RSP: 002b:00007ffdc5be4618 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 3.738890] RAX: ffffffffffffffda RBX: 000055844768a670 RCX: 00007fcb179f9b0a
[ 3.738898] RDX: 00007fcb180e7cb5 RSI: 0000000000016400 RDI: 00005584482d8710
[ 3.738905] RBP: 00007fcb180e7cb5 R08: 0000000000000076 R09: 0000000000000073
[ 3.738913] R10: 0000000000000000 R11: 0000000000000246 R12: 00005584482d8710
[ 3.738920] R13: 0000558447691a70 R14: 0000000000020000 R15: 0000558446470622
[ 3.738928] Code: Bad RIP value.
[ 3.738944] RIP: (null) RSP: ffffc90001f7b938
[ 3.738951] CR2: 0000000000000000
[ 3.739003] ---[ end trace 79a08732531ffe4d ]---
[ 3.742009] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.775658] fbcon: inteldrmfb (fb0) is primary device
[ 3.830676] Console: switching to colour frame buffer device 240x67
[ 3.864932] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.926637] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.926834] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.927003] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.934092] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.934094] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.934096] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.934101] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.934103] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.934104] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 4.010500] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 4.012854] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 4.015275] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 4.018705] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 4.021459] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 4.023892] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.026262] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.028721] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.031138] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.033477] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 4.059474] r8169 0000:03:00.0 enp3s0: link down
[ 4.062355] r8169 0000:03:00.0 enp3s0: link down
[ 4.065314] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 7.787175] r8169 0000:03:00.0 enp3s0: link up
[ 7.791060] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 13.049601] NFSD: starting 90-second grace period (net ffffffff81ac4b00)
[ 13.183706] random: crng init doneOffline
#6 2017-03-12 14:31:00
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
zofiel wrote:
Any new? with kernel 4.10 the issue is not solverd
Report the problem upstream. Preferably bisect the kernel between the last good and the first bad commit and include that in the bug report. Since this is a regression if you provide enough information it should get fixed quickly.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#7 2017-03-14 14:48:13
- zofiel
- Member
- Registered: 2015-03-27
- Posts: 11
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
issue reported:
Offline
#8 2017-03-22 16:29:25
- zofiel
- Member
- Registered: 2015-03-27
- Posts: 11
Re: Technotrend DVB-S USB Receiver stopped working with kernel 4.9.6
solved in kernel 4.10.4
Offline