You are not logged in.

Pages: 1

#1 2017-02-24 18:27:28

randall92
Member
Registered: 2017-02-24
Posts: 5

[solved] Can't get startx to start without multiple attempts on vb

The configuration is a windows 7 host with arch as guest on virtualbox.

Here's my Xorg log:
http://pastebin.com/M4ZHVHwT

And in case the pastebin expires...

[   151.974]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[   151.975] X Protocol Version 11, Revision 0
[   151.976] Build Operating System: Linux 4.8.14-1-ARCH x86_64
[   151.979] Current Operating System: Linux RandysArch 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[   151.979] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7085aa48-601d-421a-a64e-bc706b37afe3 rw quiet
[   151.985] Build Date: 14 February 2017  03:36:07AM
[   151.986]  
[   151.988] Current version of pixman: 0.34.0
[   151.992]    Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[   151.992] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   152.000] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 24 10:35:20 2017
[   152.003] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   152.004] (==) No Layout section.  Using the first Screen section.
[   152.004] (==) No screen section available. Using defaults.
[   152.004] (**) |-->Screen "Default Screen Section" (0)
[   152.004] (**) |   |-->Monitor "<default monitor>"
[   152.005] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   152.005] (==) Automatically adding devices
[   152.005] (==) Automatically enabling devices
[   152.005] (==) Automatically adding GPU devices
[   152.005] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   152.006] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   152.006]    Entry deleted from font path.
[   152.007] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[   152.007] (==) ModulePath set to "/usr/lib/xorg/modules"
[   152.007] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   152.007] (II) Loader magic: 0x822d60
[   152.007] (II) Module ABI versions:
[   152.007]    X.Org ANSI C Emulation: 0.4
[   152.007]    X.Org Video Driver: 23.0
[   152.007]    X.Org XInput driver : 24.1
[   152.007]    X.Org Server Extension : 10.0
[   152.008] (++) using VT number 1
 
[   152.008] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   152.009] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   152.009] (II) xfree86: Adding drm device (/dev/dri/card0)
[   152.010] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   152.013] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728, BIOS @ 0x????????/131072
[   152.013] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   152.014] (II) LoadModule: "glx"
[   152.015] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   152.026] (II) Module glx: vendor="X.Org Foundation"
[   152.026]    compiled for 1.19.1, module version = 1.0.0
[   152.026]    ABI class: X.Org Server Extension, version 10.0
[   152.026] (==) Matched vboxvideo as autoconfigured driver 0
[   152.026] (==) Matched vboxvideo as autoconfigured driver 1
[   152.026] (==) Matched modesetting as autoconfigured driver 2
[   152.026] (==) Matched fbdev as autoconfigured driver 3
[   152.026] (==) Matched vesa as autoconfigured driver 4
[   152.026] (==) Assigned the driver to the xf86ConfigLayout
[   152.026] (II) LoadModule: "vboxvideo"
[   152.027] (WW) Warning, couldn't open module vboxvideo
[   152.027] (II) UnloadModule: "vboxvideo"
[   152.027] (II) Unloading vboxvideo
[   152.027] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[   152.027] (II) LoadModule: "modesetting"
[   152.027] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   152.028] (II) Module modesetting: vendor="X.Org Foundation"
[   152.028]    compiled for 1.19.1, module version = 1.19.1
[   152.028]    Module class: X.Org Video Driver
[   152.028]    ABI class: X.Org Video Driver, version 23.0
[   152.028] (II) LoadModule: "fbdev"
[   152.028] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   152.029] (II) Module fbdev: vendor="X.Org Foundation"
[   152.029]    compiled for 1.19.0, module version = 0.4.4
[   152.029]    Module class: X.Org Video Driver
[   152.029]    ABI class: X.Org Video Driver, version 23.0
[   152.029] (II) LoadModule: "vesa"
[   152.029] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   152.029] (II) Module vesa: vendor="X.Org Foundation"
[   152.029]    compiled for 1.19.0, module version = 2.3.4
[   152.029]    Module class: X.Org Video Driver
[   152.029]    ABI class: X.Org Video Driver, version 23.0
[   152.029] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   152.029] (II) FBDEV: driver for framebuffer: fbdev
[   152.029] (II) VESA: driver for VESA chipsets: vesa
[   152.029] (II) modeset(0): using drv /dev/dri/card0
[   152.029] (WW) Falling back to old probe method for fbdev
[   152.029] (II) Loading sub module "fbdevhw"
[   152.029] (II) LoadModule: "fbdevhw"
[   152.030] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   152.030] (II) Module fbdevhw: vendor="X.Org Foundation"
[   152.030]    compiled for 1.19.1, module version = 0.0.2
[   152.030]    ABI class: X.Org Video Driver, version 23.0
[   152.030] (WW) Falling back to old probe method for vesa
[   152.030] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   152.030] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   152.030] (==) modeset(0): RGB weight 888
[   152.030] (==) modeset(0): Default visual is TrueColor
[   152.030] (II) Loading sub module "glamoregl"
[   152.030] (II) LoadModule: "glamoregl"
[   152.030] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   152.041] (II) Module glamoregl: vendor="X.Org Foundation"
[   152.041]    compiled for 1.19.1, module version = 1.0.0
[   152.041]    ABI class: X.Org ANSI C Emulation, version 0.4
[   152.041] (II) glamor: OpenGL accelerated X.org driver based.
[   152.315] (II) glamor: EGL version 1.4 (DRI2):
[   152.315] EGL_MESA_drm_image required.
[   152.318] (EE) modeset(0): glamor initialization failed
[   152.318] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[   152.318] (II) modeset(0): Output VGA-1 has no monitor section
[   152.319] (II) modeset(0): Output VGA-2 has no monitor section
[   152.320] (II) modeset(0): EDID for output VGA-1
[   152.320] (II) modeset(0): Manufacturer: VBX  Model: 0  Serial#: 50332672
[   152.320] (II) modeset(0): Year: 1990  Week: 1
[   152.320] (II) modeset(0): EDID Version: 1.3
[   152.320] (II) modeset(0): Digital Display Input
[   152.320] (II) modeset(0): Indeterminate output size
[   152.320] (II) modeset(0): Gamma: 2.20
[   152.320] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   152.320] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   152.320] (II) modeset(0): Default color space is primary color space
[   152.320] (II) modeset(0): First detailed timing is preferred mode
[   152.320] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   152.320] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   152.321] (II) modeset(0): Manufacturer's mask: 0
[   152.321] (II) modeset(0): Supported detailed timing:
[   152.321] (II) modeset(0): clock: 47.8 MHz   Image Size:  0 x 0 mm
[   152.321] (II) modeset(0): h_active: 1024  h_sync: 1026  h_sync_end 1028 h_blank_end 1030 h_border: 0
[   152.321] (II) modeset(0): v_active: 768  v_sync: 768  v_sync_end 802 v_blanking: 774 v_border: 0
[   152.321] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[   152.321] (II) modeset(0): Monitor name: VBOX monitor
[   152.321] (II) modeset(0): EDID (in hex):
[   152.321] (II) modeset(0):   00ffffffffffff005858000000040003
[   152.321] (II) modeset(0):   0100010380000078eeee91a3544c9926
[   152.321] (II) modeset(0):   0f505400000001010101010101010101
[   152.321] (II) modeset(0):   010101010101af120006400006300202
[   152.321] (II) modeset(0):   0202000000000000000000fd0000c800
[   152.321] (II) modeset(0):   c864000a202020202020000000fc0056
[   152.321] (II) modeset(0):   424f58206d6f6e69746f720a00000010
[   152.321] (II) modeset(0):   000a2020202020202020202020200019
[   152.321] (II) modeset(0): Printing probed modes for output VGA-1
[   152.321] (II) modeset(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz P)
[   152.321] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[   152.321] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz e)
[   152.321] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[   152.321] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[   152.321] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[   152.321] (II) modeset(0): Modeline "2048x1152"x60.0  162.00  2048 2074 2154 2250  1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
[   152.321] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[   152.321] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[   152.321] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[   152.321] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   152.321] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   152.321] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   152.321] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[   152.322] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[   152.322] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   152.322] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   152.322] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   152.322] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[   152.322] (II) modeset(0): Modeline "1366x768"x60.0   72.00  1366 1380 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
[   152.322] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[   152.322] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   152.322] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   152.322] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   152.322] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   152.322] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   152.322] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   152.322] (II) modeset(0): EDID for output VGA-2
[   152.322] (II) modeset(0): Manufacturer: VBX  Model: 0  Serial#: 70780800
[   152.322] (II) modeset(0): Year: 1990  Week: 1
[   152.322] (II) modeset(0): EDID Version: 1.3
[   152.322] (II) modeset(0): Digital Display Input
[   152.322] (II) modeset(0): Indeterminate output size
[   152.322] (II) modeset(0): Gamma: 2.20
[   152.322] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   152.322] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   152.322] (II) modeset(0): Default color space is primary color space
[   152.322] (II) modeset(0): First detailed timing is preferred mode
[   152.322] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   152.322] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   152.322] (II) modeset(0): Manufacturer's mask: 0
[   152.322] (II) modeset(0): Supported detailed timing:
[   152.322] (II) modeset(0): clock: 125.5 MHz   Image Size:  0 x 0 mm
[   152.322] (II) modeset(0): h_active: 1920  h_sync: 1922  h_sync_end 1924 h_blank_end 1926 h_border: 0
[   152.322] (II) modeset(0): v_active: 1080  v_sync: 1080  v_sync_end 1114 v_blanking: 1086 v_border: 0
[   152.322] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[   152.322] (II) modeset(0): Monitor name: VBOX monitor
[   152.322] (II) modeset(0): EDID (in hex):
[   152.322] (II) modeset(0):   00ffffffffffff005858000080073804
[   152.322] (II) modeset(0):   0100010380000078eeee91a3544c9926
[   152.322] (II) modeset(0):   0f505400000001010101010101010101
[   152.322] (II) modeset(0):   01010101010105318006703806400202
[   152.322] (II) modeset(0):   0202000000000000000000fd0000c800
[   152.322] (II) modeset(0):   c864000a202020202020000000fc0056
[   152.323] (II) modeset(0):   424f58206d6f6e69746f720a00000010
[   152.323] (II) modeset(0):   000a20202020202020202020202000f0
[   152.323] (II) modeset(0): Printing probed modes for output VGA-2
[   152.323] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz P)
[   152.323] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[   152.323] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[   152.323] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[   152.323] (II) modeset(0): Modeline "2048x1152"x60.0  162.00  2048 2074 2154 2250  1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[   152.323] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[   152.323] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   152.323] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[   152.323] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   152.323] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1366x768"x60.0   72.00  1366 1380 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[   152.323] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   152.323] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   152.323] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   152.323] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   152.323] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   152.323] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   152.323] (II) modeset(0): Output VGA-1 connected
[   152.323] (II) modeset(0): Output VGA-2 connected
[   152.323] (II) modeset(0): Using spanning desktop for initial modes
[   152.324] (II) modeset(0): Output VGA-1 using initial mode 1024x768 +0+0
[   152.324] (II) modeset(0): Output VGA-2 using initial mode 1920x1080 +1024+0
[   152.324] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   152.324] (==) modeset(0): DPI set to (96, 96)
[   152.324] (II) Loading sub module "fb"
[   152.324] (II) LoadModule: "fb"
[   152.324] (II) Loading /usr/lib/xorg/modules/libfb.so
[   152.327] (II) Module fb: vendor="X.Org Foundation"
[   152.327]    compiled for 1.19.1, module version = 1.0.0
[   152.327]    ABI class: X.Org ANSI C Emulation, version 0.4
[   152.327] (II) UnloadModule: "fbdev"
[   152.327] (II) Unloading fbdev
[   152.327] (II) UnloadSubModule: "fbdevhw"
[   152.327] (II) Unloading fbdevhw
[   152.327] (II) UnloadModule: "vesa"
[   152.327] (II) Unloading vesa
[   152.328] (==) Depth 24 pixmap format is 32 bpp
[   152.330] (==) modeset(0): Backing store enabled
[   152.330] (==) modeset(0): Silken mouse enabled
[   152.331] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   152.333] (==) modeset(0): DPMS enabled
[   152.333] (--) RandR disabled
[   152.342] (II) AIGLX: Screen 0 is not DRI2 capable
[   152.342] (EE) AIGLX: reverting to software rendering
[   152.345] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[   152.346] (II) IGLX: Loaded and initialized swrast
[   152.346] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   152.347] (II) modeset(0): Damage tracking initialized
[   152.347] (II) modeset(0): Setting screen physical size to 778 x 285
[   152.426] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   152.426] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   152.426] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   152.426] (II) LoadModule: "libinput"
[   152.426] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   152.432] (II) Module libinput: vendor="X.Org Foundation"
[   152.432]    compiled for 1.19.1, module version = 0.24.0
[   152.432]    Module class: X.Org XInput Driver
[   152.432]    ABI class: X.Org XInput driver, version 24.1
[   152.432] (II) Using input driver 'libinput' for 'Power Button'
[   152.432] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 22 paused 0
[   152.432] (**) Power Button: always reports core events
[   152.432] (**) Option "Device" "/dev/input/event3"
[   152.432] (**) Option "_source" "server/udev"
[   152.433] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   152.433] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   152.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[   152.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   152.433] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   152.433] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   152.434] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   152.434] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   152.434] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   152.434] (II) Using input driver 'libinput' for 'Sleep Button'
[   152.434] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[   152.434] (**) Sleep Button: always reports core events
[   152.434] (**) Option "Device" "/dev/input/event4"
[   152.434] (**) Option "_source" "server/udev"
[   152.434] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   152.434] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   152.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event4"
[   152.434] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   152.435] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   152.435] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   152.435] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   152.435] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   152.435] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   152.435] (II) Using input driver 'libinput' for 'Video Bus'
[   152.436] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[   152.436] (**) Video Bus: always reports core events
[   152.436] (**) Option "Device" "/dev/input/event5"
[   152.436] (**) Option "_source" "server/udev"
[   152.436] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[   152.436] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[   152.436] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6/event5"
[   152.436] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   152.436] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[   152.436] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[   152.437] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event2)
[   152.437] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[   152.437] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[   152.437] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[   152.437] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[   152.437] (**) VirtualBox mouse integration: always reports core events
[   152.437] (**) Option "Device" "/dev/input/event2"
[   152.437] (**) Option "_source" "server/udev"
[   152.438] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[   152.438] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[   152.438] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input3/event2"
[   152.438] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[   152.438] (**) Option "AccelerationScheme" "none"
[   152.438] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[   152.438] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[   152.438] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[   152.438] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[   152.438] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[   152.438] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[   152.438] (II) No input driver specified, ignoring this device.
[   152.438] (II) This device may have been added with another device file.
[   152.439] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[   152.439] (II) No input driver specified, ignoring this device.
[   152.439] (II) This device may have been added with another device file.
[   152.439] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[   152.439] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[   152.439] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[   152.439] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[   152.494] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[   152.494] (**) VirtualBox USB Tablet: always reports core events
[   152.494] (**) Option "Device" "/dev/input/event1"
[   152.494] (**) Option "_source" "server/udev"
[   152.495] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[   152.495] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[   152.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2/event1"
[   152.495] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[   152.495] (**) Option "AccelerationScheme" "none"
[   152.495] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[   152.495] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[   152.495] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[   152.496] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[   152.496] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[   152.498] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[   152.498] (II) No input driver specified, ignoring this device.
[   152.498] (II) This device may have been added with another device file.
[   152.499] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[   152.499] (II) No input driver specified, ignoring this device.
[   152.499] (II) This device may have been added with another device file.
[   152.500] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   152.500] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   152.500] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   152.500] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   152.501] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[   152.501] (**) AT Translated Set 2 keyboard: always reports core events
[   152.501] (**) Option "Device" "/dev/input/event0"
[   152.501] (**) Option "_source" "server/udev"
[   152.502] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   152.502] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   152.502] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   152.502] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   152.503] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   152.503] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   152.504] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[   152.504] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[   152.504] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[   152.504] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[   152.505] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[   152.505] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   152.505] (**) Option "Device" "/dev/input/event7"
[   152.505] (**) Option "_source" "server/udev"
[   152.506] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[   152.506] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[   152.506] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[   152.507] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[   152.507] (**) Option "AccelerationScheme" "none"
[   152.507] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[   152.507] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   152.507] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   152.508] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[   152.508] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[   152.509] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[   152.509] (II) No input driver specified, ignoring this device.
[   152.509] (II) This device may have been added with another device file.
[   152.509] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   152.509] (II) No input driver specified, ignoring this device.
[   152.509] (II) This device may have been added with another device file.
[   152.634] (II) modeset(0): EDID vendor "VBX", prod id 0
[   152.634] (II) modeset(0): DDCModeFromDetailedTiming: 1920x1080 Warning: We only handle separate sync.
[   152.634] (II) modeset(0): Using EDID range info for horizontal sync
[   152.634] (II) modeset(0): Using EDID range info for vertical refresh
[   152.635] (II) modeset(0): EDID vendor "VBX", prod id 0
[   152.635] (II) modeset(0): DDCModeFromDetailedTiming: 1920x1080 Warning: We only handle separate sync.
[   152.635] (II) modeset(0): Using hsync ranges from config file
[   152.635] (II) modeset(0): Using vrefresh ranges from config file
[   152.644] (II) modeset(0): EDID vendor "VBX", prod id 0
[   152.644] (II) modeset(0): DDCModeFromDetailedTiming: 1920x1080 Warning: We only handle separate sync.
[   152.644] (II) modeset(0): Using hsync ranges from config file
[   152.644] (II) modeset(0): Using vrefresh ranges from config file
[   152.650] (II) modeset(0): Allocate new frame buffer 3840x1080 stride
[   152.897] (**) Option "fd" "22"
[   152.897] (**) Option "fd" "25"
[   152.897] (**) Option "fd" "26"
[   152.897] (**) Option "fd" "27"
[   152.897] (**) Option "fd" "28"
[   152.897] (**) Option "fd" "29"
[   152.897] (**) Option "fd" "30"
[   152.897] (II) UnloadModule: "libinput"
[   152.897] (II) systemd-logind: releasing fd for 13:71
[   152.923] (II) UnloadModule: "libinput"
[   152.923] (II) systemd-logind: releasing fd for 13:64
[   152.963] (II) UnloadModule: "libinput"
[   152.963] (II) systemd-logind: releasing fd for 13:65
[   153.003] (II) UnloadModule: "libinput"
[   153.003] (II) systemd-logind: releasing fd for 13:66
[   153.040] (II) UnloadModule: "libinput"
[   153.040] (II) systemd-logind: releasing fd for 13:69
[   153.063] (II) UnloadModule: "libinput"
[   153.063] (II) systemd-logind: releasing fd for 13:68
[   153.083] (II) UnloadModule: "libinput"
[   153.083] (II) systemd-logind: releasing fd for 13:67
[   153.114] (II) Server terminated successfully (0). Closing log file.

uname -a:
Linux RandysArch 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64 GNU/Linux

Last edited by randall92 (2017-02-24 19:35:18)

Offline

#2 2017-02-24 18:34:18

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [solved] Can't get startx to start without multiple attempts on vb

Use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code


And X is starting successfully, you just aren't giving it anything to do. Read the xinitrc page on the wiki.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2017-02-24 18:38:13

randall92
Member
Registered: 2017-02-24
Posts: 5

Re: [solved] Can't get startx to start without multiple attempts on vb

i've got it starting i3 on my xinitrc file. Let me find it and post it.

Here's the xinitrc file

/usr/bin/VBoxClient-all
 
#!/bin/sh
 
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
 
# merge in defaults and keymaps
 
if [ -f $sysresources ]; then
 
 
 
 
 
 
 
    xrdb -merge $sysresources
 
fi
 
if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi
 
if [ -f "$userresources" ]; then
 
 
 
 
 
 
 
    xrdb -merge "$userresources"
 
fi
 
if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi
 
# start some nice programs
 
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi
 
twm &
#xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec i3

Last edited by randall92 (2017-02-24 18:43:28)

Offline

#4 2017-02-24 18:52:13

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [solved] Can't get startx to start without multiple attempts on vb

That file is broken. You can't background a window manager (twm) and you have something in front of the shebang.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2017-02-24 18:55:45

randall92
Member
Registered: 2017-02-24
Posts: 5

Re: [solved] Can't get startx to start without multiple attempts on vb

Thanks! That fixed the issue!

Offline

#6 2017-02-24 19:12:47

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [solved] Can't get startx to start without multiple attempts on vb

Please remember to mark your thread as [Solved] by editing your first post and prepending it to the title.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

Pages: 1

Board footer

Powered by FluxBB