Cannot startx on Arch guest with vboxvideo

Bl4ckb0ne · 2017-03-16 13:35:36

Hi,

I am currently trying to run an Archlinu guest inside virtualbox from windows, and I encounter some problem to launch the X server.

Here´s my Xorg.0.log

[    49.541] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    49.541] X Protocol Version 11, Revision 0
[    49.542] Build Operating System: Linux 4.9.13-1-lts x86_64 
[    49.542] Current Operating System: Linux mtl-d-00881 4.10.2-1-ARCH #1 SMP PREEMPT Mon Mar 13 17:13:41 CET 2017 x86_64
[    49.542] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5af12e04-0a8b-46c8-9b99-7bbbb0160c7d rw quiet
[    49.542] Build Date: 03 March 2017  06:00:24PM
[    49.542]  
[    49.543] Current version of pixman: 0.34.0
[    49.545] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    49.545] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    49.547] (==) Log file: "/home/simon/.local/share/xorg/Xorg.0.log", Time: Thu Mar 16 09:20:41 2017
[    49.570] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    49.601] (==) No Layout section.  Using the first Screen section.
[    49.601] (==) No screen section available. Using defaults.
[    49.601] (**) |-->Screen "Default Screen Section" (0)
[    49.601] (**) |   |-->Monitor "<default monitor>"
[    49.602] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    49.602] (==) Automatically adding devices
[    49.602] (==) Automatically enabling devices
[    49.602] (==) Automatically adding GPU devices
[    49.602] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    49.615] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    49.615] 	Entry deleted from font path.
[    49.616] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    49.616] 	Entry deleted from font path.
[    49.616] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    49.616] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    49.616] 	Entry deleted from font path.
[    49.616] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    49.616] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    49.616] (==) ModulePath set to "/usr/lib/xorg/modules"
[    49.616] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    49.616] (II) Loader magic: 0x822d60
[    49.616] (II) Module ABI versions:
[    49.616] 	X.Org ANSI C Emulation: 0.4
[    49.617] 	X.Org Video Driver: 23.0
[    49.617] 	X.Org XInput driver : 24.1
[    49.617] 	X.Org Server Extension : 10.0
[    49.617] (++) using VT number 1

[    49.617] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    49.618] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    49.619] (II) xfree86: Adding drm device (/dev/dri/card0)
[    49.619] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    49.622] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216, BIOS @ 0x????????/131072
[    49.622] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    49.622] (II) LoadModule: "glx"
[    49.630] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    49.734] (II) Module glx: vendor="X.Org Foundation"
[    49.734] 	compiled for 1.19.2, module version = 1.0.0
[    49.734] 	ABI class: X.Org Server Extension, version 10.0
[    49.734] (==) Matched vboxvideo as autoconfigured driver 0
[    49.734] (==) Matched vboxvideo as autoconfigured driver 1
[    49.734] (==) Matched modesetting as autoconfigured driver 2
[    49.734] (==) Matched fbdev as autoconfigured driver 3
[    49.734] (==) Matched vesa as autoconfigured driver 4
[    49.734] (==) Assigned the driver to the xf86ConfigLayout
[    49.734] (II) LoadModule: "vboxvideo"
[    49.735] (WW) Warning, couldn't open module vboxvideo
[    49.735] (II) UnloadModule: "vboxvideo"
[    49.735] (II) Unloading vboxvideo
[    49.735] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[    49.735] (II) LoadModule: "modesetting"
[    49.735] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    49.736] (II) Module modesetting: vendor="X.Org Foundation"
[    49.736] 	compiled for 1.19.2, module version = 1.19.2
[    49.736] 	Module class: X.Org Video Driver
[    49.736] 	ABI class: X.Org Video Driver, version 23.0
[    49.736] (II) LoadModule: "fbdev"
[    49.736] (WW) Warning, couldn't open module fbdev
[    49.736] (II) UnloadModule: "fbdev"
[    49.736] (II) Unloading fbdev
[    49.736] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    49.736] (II) LoadModule: "vesa"
[    49.736] (WW) Warning, couldn't open module vesa
[    49.736] (II) UnloadModule: "vesa"
[    49.736] (II) Unloading vesa
[    49.736] (EE) Failed to load module "vesa" (module does not exist, 0)
[    49.736] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    49.736] (II) modeset(0): using drv /dev/dri/card0
[    49.736] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    49.736] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    49.736] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    49.736] (==) modeset(0): RGB weight 888
[    49.736] (==) modeset(0): Default visual is TrueColor
[    49.736] (II) Loading sub module "glamoregl"
[    49.736] (II) LoadModule: "glamoregl"
[    49.737] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    49.790] (II) Module glamoregl: vendor="X.Org Foundation"
[    49.790] 	compiled for 1.19.2, module version = 1.0.0
[    49.790] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    49.790] (II) glamor: OpenGL accelerated X.org driver based.
[    50.887] (II) glamor: EGL version 1.4 (DRI2):
[    50.887] EGL_MESA_drm_image required.
[    50.888] (EE) modeset(0): glamor initialization failed
[    50.888] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[    50.889] (II) modeset(0): Output VGA-1 has no monitor section
[    50.889] (II) modeset(0): EDID for output VGA-1
[    50.889] (II) modeset(0): Manufacturer: VBX  Model: 0  Serial#: 39322400
[    50.889] (II) modeset(0): Year: 1990  Week: 1
[    50.889] (II) modeset(0): EDID Version: 1.3
[    50.889] (II) modeset(0): Digital Display Input
[    50.889] (II) modeset(0): Indeterminate output size
[    50.889] (II) modeset(0): Gamma: 2.20
[    50.889] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    50.889] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    50.889] (II) modeset(0): Default color space is primary color space
[    50.889] (II) modeset(0): First detailed timing is preferred mode
[    50.889] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    50.889] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    50.889] (II) modeset(0): Manufacturer's mask: 0
[    50.889] (II) modeset(0): Supported detailed timing:
[    50.889] (II) modeset(0): clock: 29.3 MHz   Image Size:  0 x 0 mm
[    50.889] (II) modeset(0): h_active: 800  h_sync: 802  h_sync_end 804 h_blank_end 806 h_border: 0
[    50.889] (II) modeset(0): v_active: 600  v_sync: 600  v_sync_end 634 v_blanking: 606 v_border: 0
[    50.889] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[    50.889] (II) modeset(0): Monitor name: VBOX monitor
[    50.889] (II) modeset(0): EDID (in hex):
[    50.889] (II) modeset(0): 	00ffffffffffff005858000020035802
[    50.889] (II) modeset(0): 	0100010380000078eeee91a3544c9926
[    50.889] (II) modeset(0): 	0f505400000001010101010101010101
[    50.889] (II) modeset(0): 	010101010101720b2006305806200202
[    50.889] (II) modeset(0): 	0202000000000000000000fd0000c800
[    50.889] (II) modeset(0): 	c864000a202020202020000000fc0056
[    50.889] (II) modeset(0): 	424f58206d6f6e69746f720a00000010
[    50.889] (II) modeset(0): 	000a202020202020202020202020008f
[    50.889] (II) modeset(0): Printing probed modes for output VGA-1
[    50.889] (II) modeset(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz P)
[    50.889] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[    50.889] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[    50.889] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[    50.889] (II) modeset(0): Modeline "2048x1152"x60.0  162.00  2048 2074 2154 2250  1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[    50.889] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    50.889] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    50.889] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    50.889] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    50.889] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1366x768"x60.0   72.00  1366 1380 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[    50.889] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    50.889] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    50.889] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    50.889] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    50.889] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    50.889] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    50.889] (II) modeset(0): Output VGA-1 connected
[    50.889] (II) modeset(0): Using exact sizes for initial modes
[    50.889] (II) modeset(0): Output VGA-1 using initial mode 800x600 +0+0
[    50.889] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    50.890] (==) modeset(0): DPI set to (96, 96)
[    50.890] (II) Loading sub module "fb"
[    50.890] (II) LoadModule: "fb"
[    50.890] (II) Loading /usr/lib/xorg/modules/libfb.so
[    50.894] (II) Module fb: vendor="X.Org Foundation"
[    50.894] 	compiled for 1.19.2, module version = 1.0.0
[    50.894] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    50.894] (==) Depth 24 pixmap format is 32 bpp
[    50.912] (==) modeset(0): Backing store enabled
[    50.912] (==) modeset(0): Silken mouse enabled
[    50.913] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    50.915] (==) modeset(0): DPMS enabled
[    50.915] (--) RandR disabled
[    50.919] (II) AIGLX: Screen 0 is not DRI2 capable
[    50.919] (EE) AIGLX: reverting to software rendering
[    50.920] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    50.920] (II) IGLX: Loaded and initialized swrast
[    50.920] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    50.921] (II) modeset(0): Damage tracking initialized
[    50.921] (II) modeset(0): Setting screen physical size to 211 x 158
[    51.097] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    51.097] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    51.097] (II) LoadModule: "libinput"
[    51.097] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    51.123] (II) Module libinput: vendor="X.Org Foundation"
[    51.123] 	compiled for 1.19.2, module version = 0.25.0
[    51.123] 	Module class: X.Org XInput Driver
[    51.123] 	ABI class: X.Org XInput driver, version 24.1
[    51.123] (II) Using input driver 'libinput' for 'Power Button'
[    51.124] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 19 paused 0
[    51.124] (**) Power Button: always reports core events
[    51.124] (**) Option "Device" "/dev/input/event3"
[    51.124] (**) Option "_source" "server/udev"
[    51.124] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    51.124] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    51.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[    51.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    51.124] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    51.124] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    51.124] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    51.124] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    51.124] (II) Using input driver 'libinput' for 'Sleep Button'
[    51.125] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 22 paused 0
[    51.125] (**) Sleep Button: always reports core events
[    51.125] (**) Option "Device" "/dev/input/event4"
[    51.125] (**) Option "_source" "server/udev"
[    51.125] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[    51.125] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[    51.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event4"
[    51.125] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    51.125] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[    51.125] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[    51.125] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    51.125] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    51.125] (II) Using input driver 'libinput' for 'Video Bus'
[    51.126] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[    51.126] (**) Video Bus: always reports core events
[    51.126] (**) Option "Device" "/dev/input/event5"
[    51.126] (**) Option "_source" "server/udev"
[    51.126] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[    51.126] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[    51.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6/event5"
[    51.126] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    51.126] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[    51.126] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[    51.127] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event2)
[    51.127] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[    51.127] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[    51.127] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 24 paused 0
[    51.127] (**) VirtualBox mouse integration: always reports core events
[    51.127] (**) Option "Device" "/dev/input/event2"
[    51.127] (**) Option "_source" "server/udev"
[    51.127] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[    51.127] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[    51.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input3/event2"
[    51.127] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[    51.127] (**) Option "AccelerationScheme" "none"
[    51.127] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[    51.127] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    51.127] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    51.128] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[    51.128] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[    51.128] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[    51.128] (II) No input driver specified, ignoring this device.
[    51.128] (II) This device may have been added with another device file.
[    51.128] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[    51.128] (II) No input driver specified, ignoring this device.
[    51.128] (II) This device may have been added with another device file.
[    51.128] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[    51.128] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[    51.128] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[    51.183] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    51.183] (**) VirtualBox USB Tablet: always reports core events
[    51.183] (**) Option "Device" "/dev/input/event1"
[    51.183] (**) Option "_source" "server/udev"
[    51.184] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    51.184] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    51.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2/event1"
[    51.184] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[    51.184] (**) Option "AccelerationScheme" "none"
[    51.184] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[    51.184] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    51.184] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    51.184] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    51.184] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    51.184] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[    51.184] (II) No input driver specified, ignoring this device.
[    51.184] (II) This device may have been added with another device file.
[    51.185] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[    51.185] (II) No input driver specified, ignoring this device.
[    51.185] (II) This device may have been added with another device file.
[    51.185] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    51.185] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    51.185] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    51.185] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 26 paused 0
[    51.185] (**) AT Translated Set 2 keyboard: always reports core events
[    51.185] (**) Option "Device" "/dev/input/event0"
[    51.185] (**) Option "_source" "server/udev"
[    51.186] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    51.186] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    51.186] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    51.186] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    51.186] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    51.186] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    51.186] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[    51.186] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[    51.186] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[    51.187] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 27 paused 0
[    51.187] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    51.187] (**) Option "Device" "/dev/input/event7"
[    51.187] (**) Option "_source" "server/udev"
[    51.187] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[    51.187] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[    51.187] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    51.187] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[    51.187] (**) Option "AccelerationScheme" "none"
[    51.187] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[    51.187] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    51.187] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    51.188] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[    51.188] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[    51.188] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[    51.188] (II) No input driver specified, ignoring this device.
[    51.188] (II) This device may have been added with another device file.
[    51.188] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    51.188] (II) No input driver specified, ignoring this device.
[    51.188] (II) This device may have been added with another device file.
[    51.339] (**) Option "fd" "19"
[    51.339] (**) Option "fd" "22"
[    51.339] (**) Option "fd" "23"
[    51.339] (**) Option "fd" "24"
[    51.339] (**) Option "fd" "25"
[    51.339] (**) Option "fd" "26"
[    51.339] (**) Option "fd" "27"
[    51.339] (II) UnloadModule: "libinput"
[    51.339] (II) systemd-logind: releasing fd for 13:71
[    51.353] (II) UnloadModule: "libinput"
[    51.353] (II) systemd-logind: releasing fd for 13:64
[    51.373] (II) UnloadModule: "libinput"
[    51.373] (II) systemd-logind: releasing fd for 13:65
[    51.396] (II) UnloadModule: "libinput"
[    51.396] (II) systemd-logind: releasing fd for 13:66
[    51.416] (II) UnloadModule: "libinput"
[    51.416] (II) systemd-logind: releasing fd for 13:69
[    51.426] (II) UnloadModule: "libinput"
[    51.426] (II) systemd-logind: releasing fd for 13:68
[    51.437] (II) UnloadModule: "libinput"
[    51.437] (II) systemd-logind: releasing fd for 13:67
[    51.451] (II) Server terminated successfully (0). Closing log file.

I know that I can use vesa or fbdev, but I want the 3d acceleration to be able to run cinnamon.

For what it seems, the module vboxvideo seems to be missing. But I checked lsmod and dmesg, and both are saying that vboxvideo is loaded.

$ dmesg | grep vbox
[    5.354217] vboxguest: loading out-of-tree module taints kernel.
[    5.360245] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[    5.360246] vboxguest: Successfully loaded version 5.1.16 (interface 0x00010004)
[    5.361811] vboxsf: Successfully loaded version 5.1.16 (interface 0x00010004)
[    5.541630] fb: switching to vboxdrmfb from VESA VGA
[    5.541733] fbcon: vboxdrmfb (fb0) is primary device
[    5.544320] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[    5.554183] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0

$ lsmod | grep vbox
vboxvideo              45056  1
ttm                    86016  1 vboxvideo
drm_kms_helper        126976  1 vboxvideo
drm                   303104  4 vboxvideo,ttm,drm_kms_helper
syscopyarea            16384  2 vboxvideo,drm_kms_helper
sysfillrect            16384  2 vboxvideo,drm_kms_helper
sysimgblt              16384  2 vboxvideo,drm_kms_helper
vboxsf                 49152  1
vboxguest             221184  2 vboxsf,vboxvideo

Here are the installed packages :
- Kernel 4.10.2-1-ARCH
- Xorg 1.19.2
- virtualbox-guest-modules-arch 5.1.16-1
- virtualbox-guest-utils 5.1.16-1

Thanks!

Last edited by Bl4ckb0ne (2017-03-16 14:13:06)

V1del · 2017-03-16 14:03:51

You lack virtualbox-guest-utils which contains the Xorg driver. that said it still attempts to load the generic modesetting driver and gets as far as having nothing to do, so additionally it seems you haven't defined anything to start within an ~/.xinitrc which you should do as well

Last edited by V1del (2017-03-16 14:06:41)

Bl4ckb0ne · 2017-03-16 14:13:57

Woops, I made a mistake in my post. virtualbox-guest-utils is installed already.
I corrected that mistake, thanks

Also, what shound I put in my .xinitrc?

Last edited by Bl4ckb0ne (2017-03-16 14:31:58)

V1del · 2017-03-16 14:43:38

Whatever you want X to start. Right now X starts up successfully but since you haven't told it to start anything it closes itself again since no client is connecting. If virtualbox-guest-utils is installed, have you also made sure to enable hardware acceleration in the virtualbox host application?

Bl4ckb0ne · 2017-03-16 14:55:54

I have twm installed. Also yes 3D acceleration is enabled in Virtualbox, but not 2D video acceleration because it can only be enable for Windows guest

Scimmia · 2017-03-16 15:14:21

There is no more vboxvideo ddx in Arch.

I see nothing wrong with the log posted. As V1del said, you just need to tell it to actually do something. https://wiki.archlinux.org/index.php/Xinit#xinitrc

Bl4ckb0ne · 2017-03-16 15:45:27

So I copied the default .xinitrc from /etc/X11/xinit, and modify it to run Cinnamon. It works, I have graphics output and everything, but it´s still in software rendering mode. Does it have something to do with the fact that vboxvideo could still not load?

Lone_Wolf · 2017-03-17 11:51:27

Are the virtualbox host modules for windows the same version as the vbox guest modules in the archlinux guest ?

Bl4ckb0ne · 2017-03-17 14:29:19

The host is Windows 7 with VirtualBox 5.1.18, and the guest have virtualbox-guest-modules-arch and virtualbox-guest-utils 5.1.16-1
Also I have a radeon HD 5450 with the latest driver.

Last edited by Bl4ckb0ne (2017-03-17 16:29:16)

Lone_Wolf · 2017-03-19 12:41:29

Arch has virtaulbox-guest-modules & utils 5.1.18 also , try updating the guest with pacman -Syu .

If that doesn't solve the issues, post full guest dmesg .

Bl4ckb0ne · 2017-03-20 13:28:07

I updated the packages this morning, and still got the error about the vboxvideo module.

Here's a paste of the full guest dmesg, after trying to launch a startx

[    0.000000] Linux version 4.10.3-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Wed Mar 15 09:17:17 CET 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5af12e04-0a8b-46c8-9b99-7bbbb0160c7d rw quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x01d5f000, 0x01d5ffff] PGTABLE
[    0.000000] BRK [0x01d60000, 0x01d60fff] PGTABLE
[    0.000000] BRK [0x01d61000, 0x01d61fff] PGTABLE
[    0.000000] BRK [0x01d62000, 0x01d62fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x372f1000-0x3796ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x00000000DFFF0030 00003C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000DFFF00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000DFFF0480 0021C8 (v02 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[    0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[    0.000000] ACPI: APIC 0x00000000DFFF0240 00006C (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000DFFF02B0 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1:1fff5001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 261237126198 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffeffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[    0.000000] On node 0 totalpages: 1048462
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14272 pages used for memmap
[    0.000000]   DMA32 zone: 913392 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff88011fc00000 s103640 r8192 d31528 u524288
[    0.000000] pcpu-alloc: s103640 r8192 d31528 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032057
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5af12e04-0a8b-46c8-9b99-7bbbb0160c7d rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4041240K/4193848K available (6350K kernel code, 1091K rwdata, 1980K rodata, 1292K init, 1032K bss, 152608K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 3392.300 MHz processor
[    0.059055] Calibrating delay loop (skipped) preset value.. 6787.29 BogoMIPS (lpj=11307666)
[    0.059057] pid_max: default: 32768 minimum: 301
[    0.059073] ACPI: Core revision 20160930
[    0.060005] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.060027] Security Framework initialized
[    0.060028] Yama: becoming mindful.
[    0.060382] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.061366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.061630] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.061634] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.061841] CPU: Physical Processor ID: 0
[    0.061841] CPU: Processor Core ID: 0
[    0.061856] mce: CPU supports 0 MCE banks
[    0.061880] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.061881] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.061991] Freeing SMP alternatives memory: 24K
[    0.062473] ftrace: allocating 25113 entries in 99 pages
[    0.071532] smpboot: Max logical packages: 1
[    0.071817] x2apic enabled
[    0.072038] Switched APIC routing to physical x2apic.
[    0.073126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.179074] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.189571] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    0.189605] KVM setup paravirtual spinlock
[    0.220077] smp: Bringing up secondary CPUs ...
[    0.247139] x86: Booting SMP configuration:
[    0.247141] .... node  #0, CPUs:      #1
[    0.247380] kvm-clock: cpu 1, msr 1:1fff5041, secondary cpu clock
[    0.247469] mce: CPU supports 0 MCE banks
[    0.277537]  #2
[    0.277781] kvm-clock: cpu 2, msr 1:1fff5081, secondary cpu clock
[    0.277870] mce: CPU supports 0 MCE banks
[    0.308136]  #3
[    0.308380] kvm-clock: cpu 3, msr 1:1fff50c1, secondary cpu clock
[    0.308471] mce: CPU supports 0 MCE banks
[    0.310578] smp: Brought up 1 node, 4 CPUs
[    0.310581] smpboot: Total of 4 processors activated (27149.16 BogoMIPS)
[    0.311072] devtmpfs: initialized
[    0.311122] x86/mm: Memory block size: 128MB
[    0.313941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.313949] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.314016] pinctrl core: initialized pinctrl subsystem
[    0.314089] RTC time: 13:21:34, date: 03/20/17
[    0.314237] NET: Registered protocol family 16
[    0.327627] cpuidle: using governor ladder
[    0.344590] cpuidle: using governor menu
[    0.344595] PCCT header not found.
[    0.344633] ACPI: bus type PCI registered
[    0.344635] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.344762] PCI: Using configuration type 1 for base access
[    0.353399] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.359849] ACPI: Added _OSI(Module Device)
[    0.359851] ACPI: Added _OSI(Processor Device)
[    0.359851] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.359852] ACPI: Added _OSI(Processor Aggregator Device)
[    0.360321] ACPI: Executed 1 blocks of module-level executable AML code
[    0.362804] ACPI: Interpreter enabled
[    0.362812] ACPI: (supports S0 S5)
[    0.362814] ACPI: Using IOAPIC for interrupt routing
[    0.362936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.366157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.366161] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.366164] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.366170] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.366441] PCI host bridge to bus 0000:00
[    0.366443] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.366444] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.366445] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.366446] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
[    0.366447] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.366485] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.367007] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.367659] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[    0.368021] pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
[    0.368168] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.368169] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.368170] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.368170] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.368376] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    0.373040] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.403551] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.406594] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    0.413243] pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
[    0.423309] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    0.425629] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    0.428028] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    0.430416] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    0.440739] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    0.440832] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.440895] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    0.441415] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[    0.443748] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[    0.458962] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    0.459425] pci 0000:00:07.0: quirk: [io  0x4000-0x403f] claimed by PIIX4 ACPI
[    0.459435] pci 0000:00:07.0: quirk: [io  0x4100-0x410f] claimed by PIIX4 SMB
[    0.459717] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[    0.461754] pci 0000:00:0d.0: reg 0x10: [io  0xd240-0xd247]
[    0.467547] pci 0000:00:0d.0: reg 0x18: [io  0xd250-0xd257]
[    0.473783] pci 0000:00:0d.0: reg 0x20: [io  0xd260-0xd26f]
[    0.476735] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[    0.482145] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    0.482488] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[    0.482637] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[    0.482755] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    0.482979] ACPI: Enabled 2 GPEs in block 00 to 07
[    0.483268] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.483270] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.483274] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.483275] vgaarb: loaded
[    0.483509] PCI: Using ACPI for IRQ routing
[    0.483512] PCI: pci_cache_line_size set to 64 bytes
[    0.483759] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.483764] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[    0.483920] NetLabel: Initializing
[    0.483921] NetLabel:  domain hash size = 128
[    0.483922] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.483948] NetLabel:  unlabeled traffic allowed by default
[    0.501630] clocksource: Switched to clocksource kvm-clock
[    0.509138] VFS: Disk quotas dquot_6.6.0
[    0.509155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.509229] pnp: PnP ACPI init
[    0.509290] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.509349] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.509860] pnp: PnP ACPI: found 2 devices
[    0.515616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.515626] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.515627] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.515628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.515629] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffdfffff window]
[    0.515661] NET: Registered protocol family 2
[    0.515804] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.515855] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.515924] TCP: Hash tables configured (established 32768 bind 32768)
[    0.515946] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.515958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.515988] NET: Registered protocol family 1
[    0.515995] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.516021] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.516067] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.517012] PCI: CLS 0 bytes, default 64
[    0.517059] Unpacking initramfs...
[    0.594860] Freeing initrd memory: 6652K
[    0.594864] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.594867] software IO TLB [mem 0xdbff0000-0xdfff0000] (64MB) mapped at [ffff8800dbff0000-ffff8800dffeffff]
[    0.595035] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.595057] Scanning for low memory corruption every 60 seconds
[    0.595461] Initialise system trusted keyrings
[    0.595686] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.596825] zbud: loaded
[    0.598160] Key type asymmetric registered
[    0.598192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.598259] io scheduler noop registered
[    0.598260] io scheduler deadline registered
[    0.598270] io scheduler cfq registered (default)
[    0.598458] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.598459] vesafb: scrolling: redraw
[    0.598460] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.598466] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000a00000, using 1216k, total 1216k
[    0.599845] Console: switching to colour frame buffer device 80x30
[    0.600418] fb0: VESA VGA frame buffer device
[    0.600433] intel_idle: does not run on family 6 model 42
[    0.600556] GHES: HEST is not enabled!
[    0.600634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.600892] Linux agpgart interface v0.103
[    0.601631] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.601741] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    0.601874] ledtrig-cpu: registered to indicate activity on CPUs
[    0.602082] NET: Registered protocol family 10
[    0.606134] Segment Routing with IPv6
[    0.606157] NET: Registered protocol family 17
[    0.606706] registered taskstats version 1
[    0.606716] Loading compiled-in X.509 certificates
[    0.606740] zswap: loaded using pool lzo/zbud
[    0.607589]   Magic number: 9:684:382
[    0.607721] rtc_cmos rtc_cmos: setting system clock to 2017-03-20 13:21:34 UTC (1490016094)
[    0.607759] PM: Hibernation image not present or could not be loaded.
[    0.609397] Freeing unused kernel memory: 1292K
[    0.609399] Write protecting the kernel read-only data: 10240k
[    0.610263] Freeing unused kernel memory: 1828K
[    0.610576] Freeing unused kernel memory: 68K
[    0.619384] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[    0.621158] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.621195] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.622443] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.622462] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.625201] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.625215] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.625220] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.625410] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.625424] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.641583] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.642069] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.642111] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.645795] ACPI: bus type USB registered
[    0.645818] usbcore: registered new interface driver usbfs
[    0.645828] usbcore: registered new interface driver hub
[    0.645871] usbcore: registered new device driver usb
[    0.646117] SCSI subsystem initialized
[    0.646571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.647262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.647263] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    0.647745] ehci-pci: EHCI PCI platform driver
[    0.648237] ohci-pci: OHCI PCI platform driver
[    0.648832] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    0.648838] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
[    0.648916] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
[    0.649719] libata version 3.00 loaded.
[    0.667992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.705651] hub 1-0:1.0: USB hub found
[    0.705669] hub 1-0:1.0: 12 ports detected
[    0.706169] ata_piix 0000:00:01.1: version 2.13
[    0.706869] scsi host0: ata_piix
[    0.707005] scsi host1: ata_piix
[    0.707053] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[    0.707054] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[    0.707096] ahci 0000:00:0d.0: version 3.0
[    0.707640] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[    0.707773] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    0.707774] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
[    0.708824] scsi host2: ahci
[    0.708914] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
[    0.866043] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[    0.866422] ata2.00: configured for UDMA/33
[    0.877679] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[    1.022326] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.022476] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[    1.022477] ata3.00: 134217728 sectors, multi 128: LBA48 NCQ (depth 31/32)
[    1.022694] ata3.00: configured for UDMA/133
[    1.023002] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[    1.061599] sd 2:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
[    1.061665] sd 2:0:0:0: [sda] Write Protect is off
[    1.061667] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.061693] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.075811] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[    1.075814] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.076022] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.078697] usb 1-1: new full-speed USB device number 2 using ohci-pci
[    1.081986]  sda: sda1 sda2
[    1.082299] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.357919] hidraw: raw HID events driver (C) Jiri Kosina
[    1.367555] usbcore: registered new interface driver usbhid
[    1.367557] usbhid: USB HID core driver
[    1.371690] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2
[    1.371798] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[    1.613728] tsc: Refined TSC clocksource calibration: 3391.064 MHz
[    1.613742] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e15585e53, max_idle_ns: 440795306742 ns
[    3.848685] floppy0: no floppy controllers found
[    4.118690] random: fast init done
[    4.139091] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.151870] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.187558] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.187594] systemd[1]: Detected virtualization oracle.
[    5.187597] systemd[1]: Detected architecture x86-64.
[    5.191572] systemd[1]: Set hostname to <mtl-d-00881>.
[    5.865626] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.866504] systemd[1]: Listening on Process Core Dump Socket.
[    5.866550] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.913128] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.913167] systemd[1]: Listening on Journal Socket.
[    5.913485] systemd[1]: Created slice User and Session Slice.
[    6.053516] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    6.317549] vboxguest: loading out-of-tree module taints kernel.
[    6.321023] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[    6.321086] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input3
[    6.321311] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[    6.321312] vboxguest: Successfully loaded version 5.1.18 (interface 0x00010004)
[    6.329403] vboxsf: Successfully loaded version 5.1.18 (interface 0x00010004)
[    6.495828] [drm] Initialized
[    6.539157] [drm] VRAM 08000000
[    6.539313] [TTM] Zone  kernel: Available graphics memory: 2025552 kiB
[    6.539314] [TTM] Initializing pool allocator
[    6.539317] [TTM] Initializing DMA pool allocator
[    6.539529] checking generic (e0000000 130000) vs hw (e0000000 8000000)
[    6.539530] fb: switching to vboxdrmfb from VESA VGA
[    6.539548] Console: switching to colour dummy device 80x25
[    6.539715] fbcon: vboxdrmfb (fb0) is primary device
[    6.541283] Console: switching to colour frame buffer device 100x37
[    6.542363] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[    6.555377] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[    6.659916] random: crng init done
[    7.335785] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.345554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.345556] ACPI: Power Button [PWRF]
[    7.345629] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input6
[    7.345631] ACPI: Sleep Button [SLPF]
[    7.354980] ACPI: AC Adapter [AC] (on-line)
[    7.362440] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.362498] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[    7.567004] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer
[    7.567005] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[    7.567006] RAPL PMU: hw unit of domain package 2^-0 Joules
[    7.567006] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
[    7.576910] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    7.913651] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[    7.950324] ppdev: user-space parallel port driver
[    7.984689] AVX version of gcm_enc/dec engaged.
[    7.984691] AES CTR mode by8 optimization enabled
[    8.015401] mousedev: PS/2 mouse device common for all mice
[    8.022488] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input8
[    8.205247] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    8.205249] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.567312] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:f4:e9:40
[    8.567318] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    8.863345] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[    8.977948] e1000 0000:00:03.0 enp0s3: renamed from eth0
[    9.013528] systemd-journald[186]: Received request to flush runtime journal from PID 1
[    9.992569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[   10.462072] floppy0: no floppy controllers found
[   10.992519] VBoxService 5.1.18 r114002 (verbosity: 0) linux.amd64 (Mar 16 2017 20:48:06) release log
               00:00:00.000058 main     Log opened 2017-03-20T13:21:44.884774000Z
[   10.992562] 00:00:00.000139 main     OS Product: Linux
[   10.992588] 00:00:00.000168 main     OS Release: 4.10.3-1-ARCH
[   10.992613] 00:00:00.000194 main     OS Version: #1 SMP PREEMPT Wed Mar 15 09:17:17 CET 2017
[   10.992647] 00:00:00.000219 main     Executable: /usr/bin/VBoxService
               00:00:00.000220 main     Process ID: 328
               00:00:00.000221 main     Package type: LINUX_64BITS_GENERIC (OSE)
[   10.994204] 00:00:00.001771 main     5.1.18 r114002 started. Verbose level = 0
[   12.519247] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[   12.520761] IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
[   12.524650] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   12.524924] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[  118.139377] sf_read_super_aux err=-71
[  118.139500] sf_read_super_aux err=-71
[  118.139609] sf_read_super_aux err=-71
[  138.039861] sf_read_super_aux err=-71
[  138.039960] sf_read_super_aux err=-71
[  138.040039] sf_read_super_aux err=-71

Lone_Wolf · 2017-03-20 14:39:18

No clues in dmesg, everything looks to work as intended.

Double check your settings on the host, maybe try to have virtualbox provide different virtual hardware to the guest.

Scimmia · 2017-03-20 14:41:02

Bl4ckb0ne wrote:

I updated the packages this morning, and still got the error about the vboxvideo module.

If you're talking about the ddx, I'll say again that there is no more vboxvideo ddx in Arch. If you're talking about the kernel module, that's different.

Bl4ckb0ne · 2017-03-20 14:50:13

@Lone_Wolf : Now I got a warning from virtualbox when I enable the 3D Acceleration : "The virtual machine is set up to use hardware graphics acceleration. However the host system dos not currently provide this, so you will not be able to start the machine". The weird thing is that I can start the guest without any problem, and that warning was not there last week.

@Scimmia : I'm talking about the kernel module

Scimmia · 2017-03-20 14:56:16

Bl4ckb0ne wrote:

@Scimmia : I'm talking about the kernel module

You haven't posted any errors related to the vboxvideo kernel module, so I have no idea what you're talking about

Lone_Wolf · 2017-03-21 12:26:23

Scimmia,

his version of vbox guest modules were not the most recent one.
Bl4ckb0ne was giving info that he had updated, the guest module snow matched the host version but the same error was still reported by xorg.

You are correct that there's no virtualbox xorg DDX driver aka xf86-video-vbox-something .
I have no idea how oracle does it, but every xorg log from an AL vbox guest where HW accelaration worked had atleast one thing 1 common :
xorg didn't complain about not finding a vboxvideo module.

In my opinion xorg complaining about not finding vboxvideo module just means something is wrong with HW acceleration.

---------------
Bl4ckb0ne, this is beginning to look like a problem on host or between host and guest .
Any chance you can try the AL guest VM on another virtualbox installation ?

An alternative might be to try the vm in a vmware player install to narrow down the problem.

Scimmia · 2017-03-21 12:28:51

Lone_Wolf wrote:

In my opinion xorg complaining about not finding vboxvideo module just means something is wrong with HW acceleration.

I'm not sure how many more ways I can say this.

THERE IS NO VBOXVIDEO DDX/XORG MODULE

Lone_Wolf wrote:

but the same error was still reported by xorg.

There was no error reported by xorg. It didn't find the vboxvideo driver, but see above.

Last edited by Scimmia (2017-03-21 12:30:43)

Lone_Wolf · 2017-03-21 12:55:24

Scimmia wrote:

THERE IS NO VBOXVIDEO DDX/XORG MODULE

I already agreed with you on that :

Lone_Wolf wrote:

Scimmia,
<snip>
You are correct that there's no virtualbox xorg DDX driver aka xf86-video-vbox-something .

Last edited by Lone_Wolf (2017-03-21 12:56:14)

Bl4ckb0ne · 2017-03-21 14:12:11

Update : I installed a new driver because the one I had didn't seems to be the right one. With the new driver I got rid of the virtualbox driver, but I still have the same error in my Xorg.0.log.

I will try with VMware shortly and give you another update.

Last edited by Bl4ckb0ne (2017-03-21 14:14:56)

Scimmia · 2017-03-21 14:45:39

Lone_Wolf wrote:

Scimmia wrote:
THERE IS NO VBOXVIDEO DDX/XORG MODULE
I already agreed with you on that :
Lone_Wolf wrote:
Scimmia,
<snip>
You are correct that there's no virtualbox xorg DDX driver aka xf86-video-vbox-something .

And yet you keep referring to it as the problem

Lone_Wolf · 2017-03-21 15:05:30

Not the problem, a big red flashing neonsign : HW acceleration is not working

I'll try to describe my logic .

A = HW acceleration works , boolean value
B = xorg does complain about missing vboxvideo module, boolean value

A = false, B = false : different problem then OP has
A = False, B = true : OP situation
A = true, B = false : problem solved
A = true, B = true : never happens in my experience

Last edited by Lone_Wolf (2017-03-21 15:06:06)

Scimmia · 2017-03-21 15:14:55

And "B" can never be "false" as, once again, it does not exist in Arch.

Last edited by Scimmia (2017-03-21 15:16:01)

Bl4ckb0ne · 2017-03-21 16:19:52

UPDATE : I converted my vm from virtualbox to vmware, installed the package xf86-video-vmware . So far it seems to be working, but when I launched the VM with 3d acceleration I encountered huge display artifacts and a crash from cinnamon.

Here are the two Xorg logs.

VMware Xorg log

[   168.130] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[   168.131] X Protocol Version 11, Revision 0
[   168.132] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[   168.133] Current Operating System: Linux mtl-d-00881 4.10.4-1-ARCH #1 SMP PREEMPT Sat Mar 18 19:39:18 CET 2017 x86_64
[   168.133] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5af12e04-0a8b-46c8-9b99-7bbbb0160c7d rw quiet
[   168.134] Build Date: 16 March 2017  02:47:54PM
[   168.134]  
[   168.135] Current version of pixman: 0.34.0
[   168.136] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   168.136] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   168.138] (==) Log file: "/home/simon/.local/share/xorg/Xorg.0.log", Time: Tue Mar 21 08:03:14 2017
[   168.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   168.210] (==) No Layout section.  Using the first Screen section.
[   168.210] (==) No screen section available. Using defaults.
[   168.210] (**) |-->Screen "Default Screen Section" (0)
[   168.210] (**) |   |-->Monitor "<default monitor>"
[   168.211] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   168.211] (==) Automatically adding devices
[   168.211] (==) Automatically enabling devices
[   168.211] (==) Automatically adding GPU devices
[   168.211] (==) Automatically binding GPU devices
[   168.211] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   168.225] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   168.225] 	Entry deleted from font path.
[   168.226] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   168.226] 	Entry deleted from font path.
[   168.226] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   168.226] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   168.226] 	Entry deleted from font path.
[   168.226] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   168.226] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   168.226] (==) ModulePath set to "/usr/lib/xorg/modules"
[   168.226] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   168.226] (II) Loader magic: 0x822d60
[   168.226] (II) Module ABI versions:
[   168.226] 	X.Org ANSI C Emulation: 0.4
[   168.226] 	X.Org Video Driver: 23.0
[   168.226] 	X.Org XInput driver : 24.1
[   168.226] 	X.Org Server Extension : 10.0
[   168.227] (++) using VT number 1

[   168.227] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   168.228] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   168.229] (II) xfree86: Adding drm device (/dev/dri/card0)
[   168.229] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   168.241] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/131072
[   168.241] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   168.241] (II) LoadModule: "glx"
[   168.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   168.330] (II) Module glx: vendor="X.Org Foundation"
[   168.330] 	compiled for 1.19.3, module version = 1.0.0
[   168.330] 	ABI class: X.Org Server Extension, version 10.0
[   168.330] (==) Matched vmware as autoconfigured driver 0
[   168.330] (==) Matched vmware as autoconfigured driver 1
[   168.330] (==) Matched modesetting as autoconfigured driver 2
[   168.330] (==) Matched fbdev as autoconfigured driver 3
[   168.330] (==) Matched vesa as autoconfigured driver 4
[   168.330] (==) Assigned the driver to the xf86ConfigLayout
[   168.330] (II) LoadModule: "vmware"
[   168.330] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[   169.042] (II) Module vmware: vendor="X.Org Foundation"
[   169.042] 	compiled for 1.19.0, module version = 13.2.1
[   169.042] 	Module class: X.Org Video Driver
[   169.042] 	ABI class: X.Org Video Driver, version 23.0
[   169.042] (II) LoadModule: "modesetting"
[   169.042] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   169.052] (II) Module modesetting: vendor="X.Org Foundation"
[   169.052] 	compiled for 1.19.3, module version = 1.19.3
[   169.052] 	Module class: X.Org Video Driver
[   169.052] 	ABI class: X.Org Video Driver, version 23.0
[   169.052] (II) LoadModule: "fbdev"
[   169.053] (WW) Warning, couldn't open module fbdev
[   169.053] (II) UnloadModule: "fbdev"
[   169.053] (II) Unloading fbdev
[   169.053] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   169.053] (II) LoadModule: "vesa"
[   169.053] (WW) Warning, couldn't open module vesa
[   169.053] (II) UnloadModule: "vesa"
[   169.053] (II) Unloading vesa
[   169.053] (EE) Failed to load module "vesa" (module does not exist, 0)
[   169.053] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[   169.053] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   169.053] (WW) Falling back to old probe method for modesetting
[   169.053] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   169.053] (II) vmware(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   169.053] (--) vmware(0): DRM driver version is 2.12.0
[   169.053] (==) vmware(0): Depth 24, (--) framebuffer bpp 32
[   169.053] (==) vmware(0): RGB weight 888
[   169.053] (==) vmware(0): Default visual is TrueColor
[   169.053] (--) vmware(0): Min width 1, Max Width 4096.
[   169.053] (--) vmware(0): Min height 1, Max Height 4096.
[   169.053] (II) vmware(0): Output Virtual1 has no monitor section
[   169.053] (II) vmware(0): Output Virtual2 has no monitor section
[   169.053] (II) vmware(0): Output Virtual3 has no monitor section
[   169.053] (II) vmware(0): Output Virtual4 has no monitor section
[   169.053] (II) vmware(0): Output Virtual5 has no monitor section
[   169.054] (II) vmware(0): Output Virtual6 has no monitor section
[   169.054] (II) vmware(0): Output Virtual7 has no monitor section
[   169.054] (II) vmware(0): Output Virtual8 has no monitor section
[   169.054] (II) vmware(0): Printing probed modes for output Virtual1
[   169.054] (II) vmware(0): Modeline "800x600"x60.0   42.75  800 850 900 950  600 650 700 750 -hsync +vsync (45.0 kHz eP)
[   169.054] (II) vmware(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[   169.054] (II) vmware(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[   169.054] (II) vmware(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[   169.054] (II) vmware(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[   169.054] (II) vmware(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[   169.054] (II) vmware(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   169.054] (II) vmware(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   169.054] (II) vmware(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[   169.054] (II) vmware(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   169.054] (II) vmware(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   169.054] (II) vmware(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   169.054] (II) vmware(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[   169.054] (II) vmware(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   169.054] (II) vmware(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   169.054] (II) vmware(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   169.054] (II) vmware(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   169.054] (II) vmware(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   169.054] (II) vmware(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[   169.054] (II) vmware(0): EDID for output Virtual2
[   169.054] (II) vmware(0): EDID for output Virtual3
[   169.054] (II) vmware(0): EDID for output Virtual4
[   169.054] (II) vmware(0): EDID for output Virtual5
[   169.054] (II) vmware(0): EDID for output Virtual6
[   169.054] (II) vmware(0): EDID for output Virtual7
[   169.054] (II) vmware(0): EDID for output Virtual8
[   169.054] (II) vmware(0): Output Virtual1 connected
[   169.054] (II) vmware(0): Output Virtual2 disconnected
[   169.054] (II) vmware(0): Output Virtual3 disconnected
[   169.054] (II) vmware(0): Output Virtual4 disconnected
[   169.054] (II) vmware(0): Output Virtual5 disconnected
[   169.054] (II) vmware(0): Output Virtual6 disconnected
[   169.054] (II) vmware(0): Output Virtual7 disconnected
[   169.054] (II) vmware(0): Output Virtual8 disconnected
[   169.054] (II) vmware(0): Using exact sizes for initial modes
[   169.054] (II) vmware(0): Output Virtual1 using initial mode 800x600 +0+0
[   169.054] (==) vmware(0): DPI set to (96, 96)
[   169.054] (==) vmware(0): Using gamma correction (1.0, 1.0, 1.0)
[   169.054] (II) Loading sub module "fb"
[   169.054] (II) LoadModule: "fb"
[   169.054] (II) Loading /usr/lib/xorg/modules/libfb.so
[   169.075] (II) Module fb: vendor="X.Org Foundation"
[   169.075] 	compiled for 1.19.3, module version = 1.0.0
[   169.075] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   169.076] (II) Loading sub module "dri2"
[   169.076] (II) LoadModule: "dri2"
[   169.076] (II) Module "dri2" already built-in
[   169.076] (II) UnloadModule: "modesetting"
[   169.076] (II) Unloading modesetting
[   169.076] (==) Depth 24 pixmap format is 32 bpp
[   169.090] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[   169.102] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[   169.102] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[   169.102] (--) vmware(0): Render acceleration is disabled.
[   169.102] (==) vmware(0): Rendercheck mode is disabled.
[   169.102] (--) vmware(0): Direct rendering (3D) is disabled.
[   169.102] (==) vmware(0): Backing store enabled
[   169.102] (==) vmware(0): Silken mouse enabled
[   169.103] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   169.104] (==) vmware(0): DPMS enabled
[   169.104] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[   169.104] (--) RandR disabled
[   169.121] (II) AIGLX: Screen 0 is not DRI2 capable
[   169.121] (EE) AIGLX: reverting to software rendering
[   169.367] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[   169.368] (II) IGLX: Loaded and initialized swrast
[   169.368] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   169.371] (II) vmware(0): Setting screen physical size to 211 x 158
[   169.603] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   169.604] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   169.604] (II) LoadModule: "libinput"
[   169.604] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   169.659] (II) Module libinput: vendor="X.Org Foundation"
[   169.659] 	compiled for 1.19.2, module version = 0.25.0
[   169.659] 	Module class: X.Org XInput Driver
[   169.660] 	ABI class: X.Org XInput driver, version 24.1
[   169.660] (II) Using input driver 'libinput' for 'Power Button'
[   169.660] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[   169.660] (**) Power Button: always reports core events
[   169.660] (**) Option "Device" "/dev/input/event1"
[   169.660] (**) Option "_source" "server/udev"
[   169.661] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[   169.661] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[   169.661] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[   169.661] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   169.661] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[   169.661] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[   169.662] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event5)
[   169.662] (**) VMware VMware Virtual USB Mouse: Applying InputClass "libinput pointer catchall"
[   169.662] (II) Using input driver 'libinput' for 'VMware VMware Virtual USB Mouse'
[   169.717] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 22 paused 0
[   169.717] (**) VMware VMware Virtual USB Mouse: always reports core events
[   169.717] (**) Option "Device" "/dev/input/event5"
[   169.717] (**) Option "_source" "server/udev"
[   169.717] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event5 is tagged by udev as: Mouse
[   169.717] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event5 is a pointer caps
[   169.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb1/1-1/1-1:1.0/0003:0E0F:0003.0001/input/input6/event5"
[   169.717] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 7)
[   169.717] (**) Option "AccelerationScheme" "none"
[   169.717] (**) VMware VMware Virtual USB Mouse: (accel) selected scheme none/0
[   169.717] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[   169.717] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[   169.718] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event5 is tagged by udev as: Mouse
[   169.718] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event5 is a pointer caps
[   169.718] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/js0)
[   169.718] (II) No input driver specified, ignoring this device.
[   169.718] (II) This device may have been added with another device file.
[   169.718] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse2)
[   169.718] (II) No input driver specified, ignoring this device.
[   169.718] (II) This device may have been added with another device file.
[   169.719] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event6)
[   169.719] (**) VMware VMware Virtual USB Mouse: Applying InputClass "libinput pointer catchall"
[   169.719] (II) Using input driver 'libinput' for 'VMware VMware Virtual USB Mouse'
[   169.773] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 23 paused 0
[   169.773] (**) VMware VMware Virtual USB Mouse: always reports core events
[   169.773] (**) Option "Device" "/dev/input/event6"
[   169.773] (**) Option "_source" "server/udev"
[   169.774] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event6 is tagged by udev as: Mouse
[   169.774] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event6 is a pointer caps
[   169.774] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb1/1-1/1-1:1.1/0003:0E0F:0003.0002/input/input7/event6"
[   169.774] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 8)
[   169.774] (**) Option "AccelerationScheme" "none"
[   169.774] (**) VMware VMware Virtual USB Mouse: (accel) selected scheme none/0
[   169.774] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[   169.774] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[   169.774] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event6 is tagged by udev as: Mouse
[   169.774] (II) input device 'VMware VMware Virtual USB Mouse', /dev/input/event6 is a pointer caps
[   169.775] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse3)
[   169.775] (II) No input driver specified, ignoring this device.
[   169.775] (II) This device may have been added with another device file.
[   169.775] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   169.775] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   169.775] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   169.775] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[   169.775] (**) AT Translated Set 2 keyboard: always reports core events
[   169.775] (**) Option "Device" "/dev/input/event0"
[   169.775] (**) Option "_source" "server/udev"
[   169.776] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   169.776] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   169.776] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   169.776] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   169.776] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   169.776] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   169.776] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event4)
[   169.776] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[   169.776] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[   169.777] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[   169.777] (**) VirtualPS/2 VMware VMMouse: always reports core events
[   169.777] (**) Option "Device" "/dev/input/event4"
[   169.777] (**) Option "_source" "server/udev"
[   169.777] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event4 is tagged by udev as: Mouse
[   169.777] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event4 is a pointer caps
[   169.777] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[   169.777] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 10)
[   169.777] (**) Option "AccelerationScheme" "none"
[   169.777] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[   169.777] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[   169.777] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[   169.777] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event4 is tagged by udev as: Mouse
[   169.777] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event4 is a pointer caps
[   169.777] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1)
[   169.777] (II) No input driver specified, ignoring this device.
[   169.778] (II) This device may have been added with another device file.
[   169.778] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event3)
[   169.778] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[   169.778] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[   169.778] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[   169.778] (**) VirtualPS/2 VMware VMMouse: always reports core events
[   169.778] (**) Option "Device" "/dev/input/event3"
[   169.778] (**) Option "_source" "server/udev"
[   169.778] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event3 is tagged by udev as: Mouse
[   169.778] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event3 is a pointer caps
[   169.779] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event3"
[   169.779] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 11)
[   169.779] (**) Option "AccelerationScheme" "none"
[   169.779] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[   169.779] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[   169.779] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[   169.779] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event3 is tagged by udev as: Mouse
[   169.779] (II) input device 'VirtualPS/2 VMware VMMouse', /dev/input/event3 is a pointer caps
[   169.779] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0)
[   169.779] (II) No input driver specified, ignoring this device.
[   169.779] (II) This device may have been added with another device file.
[   169.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[   169.779] (II) No input driver specified, ignoring this device.
[   169.779] (II) This device may have been added with another device file.
[   329.466] (**) Option "fd" "19"
[   329.466] (**) Option "fd" "22"
[   329.466] (**) Option "fd" "23"
[   329.466] (**) Option "fd" "24"
[   329.466] (**) Option "fd" "25"
[   329.466] (**) Option "fd" "26"
[   329.466] (II) UnloadModule: "libinput"
[   329.466] (II) systemd-logind: releasing fd for 13:67
[   329.503] (II) UnloadModule: "libinput"
[   329.503] (II) systemd-logind: releasing fd for 13:68
[   329.543] (II) UnloadModule: "libinput"
[   329.543] (II) systemd-logind: releasing fd for 13:64
[   329.583] (II) UnloadModule: "libinput"
[   329.583] (II) systemd-logind: releasing fd for 13:70
[   330.083] (II) UnloadModule: "libinput"
[   330.083] (II) systemd-logind: releasing fd for 13:69
[   330.573] (II) UnloadModule: "libinput"
[   330.573] (II) systemd-logind: releasing fd for 13:65
[   330.598] (II) Server terminated successfully (0). Closing log file.

Virtualbox Xorg log

[    20.040] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    20.040] X Protocol Version 11, Revision 0
[    20.040] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[    20.040] Current Operating System: Linux mtl-d-00881 4.10.4-1-ARCH #1 SMP PREEMPT Sat Mar 18 19:39:18 CET 2017 x86_64
[    20.040] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5af12e04-0a8b-46c8-9b99-7bbbb0160c7d rw quiet
[    20.040] Build Date: 16 March 2017  02:47:54PM
[    20.040]  
[    20.041] Current version of pixman: 0.34.0
[    20.041] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.041] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.041] (==) Log file: "/home/simon/.local/share/xorg/Xorg.0.log", Time: Tue Mar 21 11:48:33 2017
[    20.079] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.090] (==) No Layout section.  Using the first Screen section.
[    20.091] (==) No screen section available. Using defaults.
[    20.091] (**) |-->Screen "Default Screen Section" (0)
[    20.091] (**) |   |-->Monitor "<default monitor>"
[    20.092] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.092] (==) Automatically adding devices
[    20.092] (==) Automatically enabling devices
[    20.092] (==) Automatically adding GPU devices
[    20.092] (==) Automatically binding GPU devices
[    20.092] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    20.139] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    20.139] 	Entry deleted from font path.
[    20.140] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    20.140] 	Entry deleted from font path.
[    20.140] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    20.140] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    20.140] 	Entry deleted from font path.
[    20.140] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    20.140] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    20.140] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.140] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.141] (II) Loader magic: 0x822d60
[    20.141] (II) Module ABI versions:
[    20.141] 	X.Org ANSI C Emulation: 0.4
[    20.141] 	X.Org Video Driver: 23.0
[    20.141] 	X.Org XInput driver : 24.1
[    20.141] 	X.Org Server Extension : 10.0
[    20.141] (++) using VT number 1

[    20.141] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    20.143] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    20.143] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.143] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    20.146] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728, BIOS @ 0x????????/131072
[    20.146] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    20.148] (II) LoadModule: "glx"
[    20.152] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.218] (II) Module glx: vendor="X.Org Foundation"
[    20.218] 	compiled for 1.19.3, module version = 1.0.0
[    20.218] 	ABI class: X.Org Server Extension, version 10.0
[    20.218] (==) Matched vboxvideo as autoconfigured driver 0
[    20.218] (==) Matched vboxvideo as autoconfigured driver 1
[    20.218] (==) Matched modesetting as autoconfigured driver 2
[    20.218] (==) Matched fbdev as autoconfigured driver 3
[    20.218] (==) Matched vesa as autoconfigured driver 4
[    20.218] (==) Assigned the driver to the xf86ConfigLayout
[    20.218] (II) LoadModule: "vboxvideo"
[    20.218] (WW) Warning, couldn't open module vboxvideo
[    20.218] (II) UnloadModule: "vboxvideo"
[    20.218] (II) Unloading vboxvideo
[    20.218] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[    20.218] (II) LoadModule: "modesetting"
[    20.218] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.229] (II) Module modesetting: vendor="X.Org Foundation"
[    20.229] 	compiled for 1.19.3, module version = 1.19.3
[    20.229] 	Module class: X.Org Video Driver
[    20.229] 	ABI class: X.Org Video Driver, version 23.0
[    20.229] (II) LoadModule: "fbdev"
[    20.229] (WW) Warning, couldn't open module fbdev
[    20.229] (II) UnloadModule: "fbdev"
[    20.229] (II) Unloading fbdev
[    20.229] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    20.229] (II) LoadModule: "vesa"
[    20.229] (WW) Warning, couldn't open module vesa
[    20.229] (II) UnloadModule: "vesa"
[    20.229] (II) Unloading vesa
[    20.229] (EE) Failed to load module "vesa" (module does not exist, 0)
[    20.229] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.230] (II) modeset(0): using drv /dev/dri/card0
[    20.230] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    20.230] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.230] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    20.230] (==) modeset(0): RGB weight 888
[    20.230] (==) modeset(0): Default visual is TrueColor
[    20.230] (II) Loading sub module "glamoregl"
[    20.230] (II) LoadModule: "glamoregl"
[    20.230] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    20.291] (II) Module glamoregl: vendor="X.Org Foundation"
[    20.291] 	compiled for 1.19.3, module version = 1.0.0
[    20.291] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.291] (II) glamor: OpenGL accelerated X.org driver based.
[    21.445] (II) glamor: EGL version 1.4 (DRI2):
[    21.445] EGL_MESA_drm_image required.
[    21.464] (EE) modeset(0): glamor initialization failed
[    21.464] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[    21.465] (II) modeset(0): Output VGA-1 has no monitor section
[    21.465] (II) modeset(0): EDID for output VGA-1
[    21.465] (II) modeset(0): Manufacturer: VBX  Model: 0  Serial#: 39322400
[    21.465] (II) modeset(0): Year: 1990  Week: 1
[    21.465] (II) modeset(0): EDID Version: 1.3
[    21.465] (II) modeset(0): Digital Display Input
[    21.465] (II) modeset(0): Indeterminate output size
[    21.465] (II) modeset(0): Gamma: 2.20
[    21.465] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    21.465] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.465] (II) modeset(0): Default color space is primary color space
[    21.465] (II) modeset(0): First detailed timing is preferred mode
[    21.465] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    21.465] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    21.465] (II) modeset(0): Manufacturer's mask: 0
[    21.465] (II) modeset(0): Supported detailed timing:
[    21.465] (II) modeset(0): clock: 29.3 MHz   Image Size:  0 x 0 mm
[    21.465] (II) modeset(0): h_active: 800  h_sync: 802  h_sync_end 804 h_blank_end 806 h_border: 0
[    21.465] (II) modeset(0): v_active: 600  v_sync: 600  v_sync_end 634 v_blanking: 606 v_border: 0
[    21.465] (II) modeset(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[    21.465] (II) modeset(0): Monitor name: VBOX monitor
[    21.465] (II) modeset(0): EDID (in hex):
[    21.465] (II) modeset(0): 	00ffffffffffff005858000020035802
[    21.465] (II) modeset(0): 	0100010380000078eeee91a3544c9926
[    21.465] (II) modeset(0): 	0f505400000001010101010101010101
[    21.465] (II) modeset(0): 	010101010101720b2006305806200202
[    21.465] (II) modeset(0): 	0202000000000000000000fd0000c800
[    21.465] (II) modeset(0): 	c864000a202020202020000000fc0056
[    21.465] (II) modeset(0): 	424f58206d6f6e69746f720a00000010
[    21.465] (II) modeset(0): 	000a202020202020202020202020008f
[    21.465] (II) modeset(0): Printing probed modes for output VGA-1
[    21.465] (II) modeset(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz P)
[    21.465] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[    21.465] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[    21.465] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[    21.465] (II) modeset(0): Modeline "2048x1152"x60.0  162.00  2048 2074 2154 2250  1152 1153 1156 1200 +hsync +vsync (72.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[    21.465] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    21.465] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    21.465] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    21.465] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    21.465] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1366x768"x60.0   72.00  1366 1380 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[    21.465] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    21.465] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.465] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.465] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.465] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    21.465] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.465] (II) modeset(0): Output VGA-1 connected
[    21.465] (II) modeset(0): Using exact sizes for initial modes
[    21.465] (II) modeset(0): Output VGA-1 using initial mode 800x600 +0+0
[    21.465] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.465] (==) modeset(0): DPI set to (96, 96)
[    21.465] (II) Loading sub module "fb"
[    21.465] (II) LoadModule: "fb"
[    21.465] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.481] (II) Module fb: vendor="X.Org Foundation"
[    21.481] 	compiled for 1.19.3, module version = 1.0.0
[    21.481] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.481] (==) Depth 24 pixmap format is 32 bpp
[    21.503] (==) modeset(0): Backing store enabled
[    21.503] (==) modeset(0): Silken mouse enabled
[    21.504] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.506] (==) modeset(0): DPMS enabled
[    21.506] (--) RandR disabled
[    21.511] (II) AIGLX: Screen 0 is not DRI2 capable
[    21.511] (EE) AIGLX: reverting to software rendering
[    21.512] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    21.512] (II) IGLX: Loaded and initialized swrast
[    21.512] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    21.513] (II) modeset(0): Damage tracking initialized
[    21.513] (II) modeset(0): Setting screen physical size to 211 x 158
[    21.739] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    21.739] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    21.739] (II) LoadModule: "libinput"
[    21.739] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    21.808] (II) Module libinput: vendor="X.Org Foundation"
[    21.808] 	compiled for 1.19.2, module version = 0.25.0
[    21.808] 	Module class: X.Org XInput Driver
[    21.808] 	ABI class: X.Org XInput driver, version 24.1
[    21.808] (II) Using input driver 'libinput' for 'Power Button'
[    21.809] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[    21.809] (**) Power Button: always reports core events
[    21.809] (**) Option "Device" "/dev/input/event4"
[    21.809] (**) Option "_source" "server/udev"
[    21.809] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    21.809] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    21.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    21.809] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.809] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    21.809] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    21.810] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    21.810] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    21.810] (II) Using input driver 'libinput' for 'Sleep Button'
[    21.810] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 22 paused 0
[    21.810] (**) Sleep Button: always reports core events
[    21.810] (**) Option "Device" "/dev/input/event5"
[    21.810] (**) Option "_source" "server/udev"
[    21.810] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    21.810] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    21.810] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input6/event5"
[    21.810] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    21.811] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    21.811] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    21.811] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    21.811] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    21.811] (II) Using input driver 'libinput' for 'Video Bus'
[    21.811] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 23 paused 0
[    21.811] (**) Video Bus: always reports core events
[    21.811] (**) Option "Device" "/dev/input/event6"
[    21.811] (**) Option "_source" "server/udev"
[    21.812] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[    21.812] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[    21.812] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7/event6"
[    21.812] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    21.812] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[    21.812] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[    21.812] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event2)
[    21.812] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[    21.812] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[    21.813] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 24 paused 0
[    21.813] (**) VirtualBox mouse integration: always reports core events
[    21.813] (**) Option "Device" "/dev/input/event2"
[    21.813] (**) Option "_source" "server/udev"
[    21.813] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[    21.813] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[    21.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input3/event2"
[    21.813] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[    21.813] (**) Option "AccelerationScheme" "none"
[    21.813] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[    21.813] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    21.813] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    21.813] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is tagged by udev as: Mouse
[    21.813] (II) input device 'VirtualBox mouse integration', /dev/input/event2 is a pointer caps
[    21.813] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[    21.813] (II) No input driver specified, ignoring this device.
[    21.813] (II) This device may have been added with another device file.
[    21.814] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[    21.814] (II) No input driver specified, ignoring this device.
[    21.814] (II) This device may have been added with another device file.
[    21.814] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[    21.814] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[    21.814] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[    21.870] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    21.870] (**) VirtualBox USB Tablet: always reports core events
[    21.870] (**) Option "Device" "/dev/input/event1"
[    21.870] (**) Option "_source" "server/udev"
[    21.870] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    21.870] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    21.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2/event1"
[    21.870] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[    21.870] (**) Option "AccelerationScheme" "none"
[    21.870] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[    21.870] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    21.870] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    21.871] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
[    21.871] (II) input device 'VirtualBox USB Tablet', /dev/input/event1 is a pointer caps
[    21.871] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[    21.871] (II) No input driver specified, ignoring this device.
[    21.871] (II) This device may have been added with another device file.
[    21.871] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[    21.871] (II) No input driver specified, ignoring this device.
[    21.871] (II) This device may have been added with another device file.
[    21.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    21.872] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    21.872] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    21.872] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 26 paused 0
[    21.872] (**) AT Translated Set 2 keyboard: always reports core events
[    21.872] (**) Option "Device" "/dev/input/event0"
[    21.872] (**) Option "_source" "server/udev"
[    21.872] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    21.872] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    21.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    21.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    21.873] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    21.873] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    21.873] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[    21.873] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[    21.873] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[    21.874] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 27 paused 0
[    21.874] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    21.874] (**) Option "Device" "/dev/input/event7"
[    21.874] (**) Option "_source" "server/udev"
[    21.874] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[    21.874] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[    21.874] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    21.874] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[    21.874] (**) Option "AccelerationScheme" "none"
[    21.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[    21.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    21.874] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    21.874] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is tagged by udev as: Mouse
[    21.874] (II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event7 is a pointer caps
[    21.874] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[    21.874] (II) No input driver specified, ignoring this device.
[    21.874] (II) This device may have been added with another device file.
[    21.875] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    21.875] (II) No input driver specified, ignoring this device.
[    21.875] (II) This device may have been added with another device file.
[    26.716] (II) modeset(0): EDID vendor "VBX", prod id 0
[    26.716] (II) modeset(0): DDCModeFromDetailedTiming: 1920x976 Warning: We only handle separate sync.
[    26.716] (II) modeset(0): Using EDID range info for horizontal sync
[    26.716] (II) modeset(0): Using EDID range info for vertical refresh
[    28.836] (II) modeset(0): EDID vendor "VBX", prod id 0
[    28.836] (II) modeset(0): DDCModeFromDetailedTiming: 1920x976 Warning: We only handle separate sync.
[    28.836] (II) modeset(0): Using hsync ranges from config file
[    28.836] (II) modeset(0): Using vrefresh ranges from config file
[    48.468] (II) modeset(0): Allocate new frame buffer 1600x1200 stride

V1del · 2017-03-21 17:29:24

That warning you mentioned in post #13 might be pretty key. Are your graphics drivers set up correctly ? Don't use the factory-provided graphics drivers actually get them from you graphics card vendor the drivers shipped with most Windows OEM systems have crippled OpenGL support. Is hardware virtualization enabled in your BIOS/UEFI?

Lone_Wolf · 2017-03-21 18:43:50

I suddenly got the feeling we overlooked something basic, and checked for other virtualbox pacakges.

The file xorg is looking for is in virtualbox-guest-utils package was that installed ?

Note : it's a dri module like those provided by mesa, not a DDX driver.

Arch Linux

#1 2017-03-16 13:35:36

Cannot startx on Arch guest with vboxvideo

#2 2017-03-16 14:03:51

Re: Cannot startx on Arch guest with vboxvideo

#3 2017-03-16 14:13:57

Re: Cannot startx on Arch guest with vboxvideo

#4 2017-03-16 14:43:38

Re: Cannot startx on Arch guest with vboxvideo

#5 2017-03-16 14:55:54

Re: Cannot startx on Arch guest with vboxvideo

#6 2017-03-16 15:14:21

Re: Cannot startx on Arch guest with vboxvideo

#7 2017-03-16 15:45:27

Re: Cannot startx on Arch guest with vboxvideo

#8 2017-03-17 11:51:27

Re: Cannot startx on Arch guest with vboxvideo

#9 2017-03-17 14:29:19

Re: Cannot startx on Arch guest with vboxvideo

#10 2017-03-19 12:41:29

Re: Cannot startx on Arch guest with vboxvideo

#11 2017-03-20 13:28:07

Re: Cannot startx on Arch guest with vboxvideo

#12 2017-03-20 14:39:18

Re: Cannot startx on Arch guest with vboxvideo

#13 2017-03-20 14:41:02

Re: Cannot startx on Arch guest with vboxvideo

#14 2017-03-20 14:50:13

Re: Cannot startx on Arch guest with vboxvideo

#15 2017-03-20 14:56:16

Re: Cannot startx on Arch guest with vboxvideo

#16 2017-03-21 12:26:23

Re: Cannot startx on Arch guest with vboxvideo

#17 2017-03-21 12:28:51

Re: Cannot startx on Arch guest with vboxvideo

#18 2017-03-21 12:55:24

Re: Cannot startx on Arch guest with vboxvideo

#19 2017-03-21 14:12:11

Re: Cannot startx on Arch guest with vboxvideo

#20 2017-03-21 14:45:39

Re: Cannot startx on Arch guest with vboxvideo

#21 2017-03-21 15:05:30

Re: Cannot startx on Arch guest with vboxvideo

#22 2017-03-21 15:14:55

Re: Cannot startx on Arch guest with vboxvideo

#23 2017-03-21 16:19:52

Re: Cannot startx on Arch guest with vboxvideo

#24 2017-03-21 17:29:24

Re: Cannot startx on Arch guest with vboxvideo

#25 2017-03-21 18:43:50

Re: Cannot startx on Arch guest with vboxvideo

Board footer