You are not logged in.

#1 2017-03-22 13:54:18

allon
Member
Registered: 2017-03-09
Posts: 34

Router comfast cf-wr625n

If i want to get to the address router: 192.168.10.1

I must write in the file: /etc/dhcpcd.conf at the end of the file:

Interface enp2s0
Static ip_address = 192.168.10.2

Then I go to the router to the address: 192.168.10.1 I choose:

WAN TYPE:

Dhcp

But it can't get IP from DHCP. What settings should I set on the router that it gets IP from DHCP server?

If I write static IP settings, mask, gateway and dns then everything works.
It works until my computer receives a new IP from the dhcp server/

The photo settings on the router:

https://fotki.yandex.ru/next/users/mage … 890?page=0
https://fotki.yandex.ru/next/users/mage … 318?page=0
https://fotki.yandex.ru/next/users/mage … 319?page=0
https://fotki.yandex.ru/next/users/mage … 320?page=0
https://fotki.yandex.ru/next/users/mage … 321?page=0

Last edited by allon (2017-03-22 13:55:16)

Offline

#2 2017-03-22 15:24:57

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: Router comfast cf-wr625n

You're changing the wrong setting. WAN - DHCP is how the router gets its external IP address from your ISP. You need to look for a LAN - DHCP setting.


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

Board footer

Powered by FluxBB