You are not logged in.
Pages: 1
Hi
I need some help hear
I'm working all day on LIRC and all i got that devinput only working without ok & media key and cannot make them work
sudo ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
Driver ite-cir, table rc-rc6-mce
Supported protocols: unknown other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc rc-6
Name: ITE8713 CIR transceiver
bus: 25, vendor/product: 1283:0000, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 mslirc_options.conf
[lircd]
nodaemon = true
driver = devinput
device = /dev/input/event3
output = /var/run/lirc/lircd
pidfile = /var/run/lirc/lircd.pid
plugindir = /usr/lib/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#effective-user =
#listen = [address:]port
#connect = host[:port]
#loglevel = 6
#uinput = ...
#release = ...
#logfile = ...
[lircmd]
uinput = False
nodaemon = FalseIf i set the driver = ite-cir lircd fail to start
also this file only working
devinput.lircd.conf
begin remote
name devinput-32
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x8001
gap 132799
toggle_bit 0
driver devinput
begin codes
KEY_0 11
KEY_102ND 86
KEY_10CHANNELSDOWN 0x1b9
KEY_10CHANNELSUP 0x1b8
KEY_1 2
KEY_2 3
KEY_3 4
KEY_3D_MODE 0x26f
KEY_4 5
KEY_5 6
KEY_6 7
KEY_7 8
KEY_8 9
KEY_9 10
KEY_A 30
KEY_AB 0x196
KEY_ADDRESSBOOK 0x1ad
KEY_AGAIN 129
KEY_ALS_TOGGLE 0x230
KEY_ALTERASE 222
KEY_ANGLE 0x173
KEY_APOSTROPHE 40
KEY_APPSELECT 0x244
KEY_ARCHIVE 0x169
KEY_ATTENDANT_OFF 0x21c
KEY_ATTENDANT_ON 0x21bI try to create conf file with irrecord but it's not working
# Please take the time to finish this file as described in
# https://sourceforge.net/p/lirc-remotes/wiki/Checklist/
# and make it available to others by sending it to
# <lirc@bartelmus.de>
#
# This config file was automatically generated
# using lirc-0.9.4d(devinput) on Sat Mar 25 19:25:14 2017
# Command line used: --device=/dev/lirc0 MyRemote
# Kernel version (uname -r): 4.9.17-1-lts
#
# Remote name (as of config file): xbox360
# Brand of remote device, the thing you hold in your hand:
# Remote device model nr:
# Remote device info url:
# Does remote device has a bundled capture device e. g., a
# usb dongle? :
# For bundled USB devices: usb vendor id, product id
# and device string (use dmesg or lsusb):
# Type of device controlled
# (TV, VCR, Audio, DVD, Satellite, Cable, HTPC, ...) :
# Device(s) controlled by this remote:
begin remote
name xbox360
driver devinput
bits 8
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 136
pre_data 0x1
post_data_bits 48
post_data 0x10001A9
gap 1147
toggle_bit_mask 0x0
frequency 38000
begin codes
KEY_MEDIA 0xCC
KEY_OK 0xD4
KEY_UP 0x0000000000000000000000000000000001D4000001000197
end codes
end remoteir-keytable -r working but i need lircd to use irexec
please help
Last edited by abauomy (2017-03-26 07:00:05)
Offline
Not a Programming issue, moving to NC...
Offline
Pages: 1