You are not logged in.

#1 2017-03-29 18:41:35

PEAR
Member
Registered: 2017-03-29
Posts: 4

unable to boot new arch linux installation

Hi there!

I've got a brand new Thinkpad 13 and I'm tried to install an Arch Linux on the system. I disabled SecureBoot, switched to Legacy-Boot, installed Arch twice and tried to boot is without any success. To eliminate the possiblity of a mistake during the setup I ran a Debian-Installer with the exact same result. I select the SSD in the boot-manager and the screen returns after a few milliseconds.

I'm running out of ideas at the moment... any help?

Offline

#2 2017-03-29 18:45:21

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: unable to boot new arch linux installation

More information required. Details about your hardware, partitioning, boot loader, configuration, etc...

Please see How To Ask Questions The Smart Way.


Moving to NC...


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2017-03-29 19:08:28

PEAR
Member
Registered: 2017-03-29
Posts: 4

Re: unable to boot new arch linux installation

Ok - no problem:
The device: http://pcsupport.lenovo.com/us/de/produ … 20J2S00F00
For setup I followed this guide: https://wiki.archlinux.org/index.php/dm … ire_system . But I don't think partitioning matters, because I installed a plain Debian with a single partition which did not work either.
In the meantime a plugged in a SSD (using a USB-SATA-adapter) took out of a running ThinkPad T430 with a working Arch, which behaved exactly the same.
The boot loader is Syslinux and the configuration all standard except of the descriped things.
Any more you have to know? smile

Offline

#4 2017-03-29 19:18:58

loqs
Member
Registered: 2014-03-06
Posts: 19,114

Re: unable to boot new arch linux installation

So syslinux under bios?  If you were encrypting the entire system including /boot then you would need to use grub as I understand it.

Offline

#5 2017-03-29 19:26:04

PEAR
Member
Registered: 2017-03-29
Posts: 4

Re: unable to boot new arch linux installation

No, /boot is not encrypted. Over all, I do not think its in any way related to Arch setup, because the Debian does not work either. In addition, Debian uses Grub.

Offline

#6 2017-03-29 19:30:44

cirrus
Member
From: Glasgow Scotland
Registered: 2012-08-24
Posts: 341
Website

Re: unable to boot new arch linux installation

PEAR wrote:

The boot loader is Syslinux and the configuration all standard except of the descriped things

Ensure your syslinux.cfg  APPEND line points to correct mountpoint, preferably using the UUID, the UUID can be had by typing

lsblk -f

into the command line.
here is a modified version of mine for your reference:      APPEND root=UUID=21433243-0c85-42b9-8302-3f4d64703e14 rw 
ofc yours will differ.
good luck.

Offline

#7 2017-03-29 19:31:59

loqs
Member
Registered: 2014-03-06
Posts: 19,114

Re: unable to boot new arch linux installation

loqs wrote:

So syslinux under bios?

Please also include the output of

# parted -l

Also the commands you used to install syslinux

Offline

#8 2017-03-30 15:50:40

MaBoga
Member
Registered: 2017-03-25
Posts: 4

Re: unable to boot new arch linux installation

Hello there,

I don't know if this is the right place for my problem, but I guess I'll notice that from the replies.

I'm trying to set up my new laptop in a dual boot format. My system is formatted as follows and is booting in UEFI (secure disabled)
SSD1 (hd0) (Windows drive)
sda1: windows recovery
sda2: efi
sda3: windows os

SSD2 (hd1)
sdb1: windows partition
sdb2: Linux file system /

HDD1 (hd2)
sdc1: windows partition
sdc2: swap
sdc3: /home

HDD2 (hd3)
sdd: NTFS windows data partition

Further hardware installed is:
15.6" FHD screen
NVIDIA GTX 1060M-6GB
a I7-7700HQ processor
and 32GB RAM

So far I have had no problem creating the different partitions and mounting them.
mount /dev/sdb2 /mnt (ext4)
mount /dev/sda2 /mnt/boot/efi (vfat)
mount /dev/sdc3 /mnt/home (ext4)

Then I did the instalation of the base system (+base-devel), plasma desktop, sddm, vim, xorg packages, nvidia and grub + efibootmgr, I enabled the sddm
oh and the genfstab and initial RAM disk creation all functioned fine
I installed the grub bootloader into /dev/sdb (because I want to give linux its own drive, keeping it separated from windows, my idea was to use the windows bootloader to start first before grub)

I did see a remark when I exit and umount /mnt, it said it was busy, but as I'm not really patient I just did reboot, which worked starting into grub

But rebooting into Arch hangs on loading initial ramdisk, removing quiet doesn't make me any wiser too. There seemed to be some problems with nouveau, which after reading other forum entries made me think it had to do with the videocard, so i installed nvidia, but nothing, then adding Nomodeset and Nouveau.modeset=noapic, just made the system hang earlier (it seems, I did not want to wait for hrs to find out)

Could there be a problem with the fact I didn't install grub into the windows drive? I can boot my system using the usb flash drive, after which I need to mount all the drives again before I can chroot into Arch again, but I'm not able to get the system to start the plasma desktop.

When I use the F7 (select boot) I still see an Ubuntu option listed (from a first dualboot experiment), could this be a problem too?

Or what information could I post to help solve this?
Cheers!


Entropy Rules

Offline

#9 2017-03-30 16:46:12

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: unable to boot new arch linux installation


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

Board footer

Powered by FluxBB