You are not logged in.
I'm trying to connect a TV to my laptop, but unfortunately some part of the border is cut.
The output from xrandr is
Screen 0: minimum 320 x 200, current 2560 x 1440, maximum 8192 x 8192
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
2560x1440 60.00*+ 48.00
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
1600x1200 60.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 760mm x 450mm
1360x768 60.02 +
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00* 50.00 59.94
1280x768 59.87
1280x720 60.00 50.00 59.94
1024x768 75.03 70.07 60.00
800x600 72.19 75.00 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94 59.94
720x480i 60.00 59.94
640x480 75.00 72.81 60.00 59.94
720x400 70.08
while relevant output from xrandr --verbose is
HDMI-2 connected (normal left inverted right x axis y axis)
Identifier: 0x46
Timestamp: 4733763
Subpixel: unknown
Clones: DP-2
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff006318000001010101
01180103800000780ad7a5a2594a9624
145054adce0001010101010101010101
010101010101662150b051001b304070
3600f8c22100001e0e1f008051001e30
40803700f8c22100001c000000fc0057
5847412054560a2020202020000000fd
00324c1e410b000a2020202020200117
02032df1509005040203060711121314
15161f01202609070715072483010000
6c030c001000001ec001010101023a80
1871382d40582c450070ea3100001e01
1d8018711c1620582c2500f419110000
9e8c0ad08a20e02d10103a960058c221
0000188c0ad08a20e02d10103e960020
c23100001800000000000000000000e9
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
1360x768 (0xed) 85.500MHz +HSync +VSync +preferred
h: width 1360 start 1424 end 1536 total 1792 skew 0 clock 47.71KHz
v: height 768 start 771 end 777 total 795 clock 60.02Hz
1920x1080 (0xee) 148.500MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0xef) 148.500MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.25KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.00Hz
1920x1080 (0xf0) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1920x1080i (0xf1) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.75KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.00Hz
1920x1080i (0xf2) 74.250MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.12KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.00Hz
1920x1080 (0xf3) 74.250MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.00KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.00Hz
1920x1080i (0xf4) 74.176MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.72KHz
v: height 1080 start 1084 end 1094 total 1125 clock 59.94Hz
1920x1080 (0xf5) 74.176MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 26.97KHz
v: height 1080 start 1084 end 1089 total 1125 clock 23.98Hz
1280x768 (0xf6) 79.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 47.78KHz
v: height 768 start 771 end 778 total 798 clock 59.87Hz
1280x720 (0xf7) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0xf8) 74.250MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.50KHz
v: height 720 start 725 end 730 total 750 clock 50.00Hz
1280x720 (0xf9) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1024x768 (0xfa) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0xfb) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x52) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
800x600 (0xfc) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0xfd) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x57) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
720x576 (0xfe) 27.000MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
720x576i (0xff) 13.500MHz -HSync -VSync Interlace
h: width 720 start 732 end 795 total 864 skew 0 clock 15.62KHz
v: height 576 start 580 end 586 total 625 clock 50.00Hz
720x480 (0x100) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0x101) 27.000MHz -HSync -VSync
h: width 720 start 736 end 794 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
720x480 (0x102) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
720x480i (0x103) 13.514MHz -HSync -VSync Interlace
h: width 720 start 739 end 801 total 858 skew 0 clock 15.75KHz
v: height 480 start 488 end 494 total 525 clock 60.00Hz
720x480i (0x104) 13.500MHz -HSync -VSync Interlace
h: width 720 start 739 end 801 total 858 skew 0 clock 15.73KHz
v: height 480 start 488 end 494 total 525 clock 59.94Hz
640x480 (0x105) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x106) 31.500MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.86KHz
v: height 480 start 489 end 492 total 520 clock 72.81Hz
640x480 (0x107) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0x5c) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x108) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
As it seems that laptop gets EDID and similar data right, perhaps is it just a matter of configuring xrandr?
Can anyone instruct me what parameteres I should input, if I want resolution of 1920x1080?
Last edited by nicolo (2017-10-11 03:44:52)
Offline
Well truth is many TVs does overscan themselves and even have it enabled by default. So you should probably check the settings on the TV.
...
HDMI-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 760mm x 450mm
1360x768 60.02 +
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00* 50.00 59.94
...
The current mode (*) the TV is on is 1080i60. If you want for example 1080p60, you can do
xrandr --output HDMI-2 --mode 1920x1080 --rate 60
Though the TV has its preferred/optimal mode at 1360x768@60Hz (+).
Last edited by tom.ty89 (2017-04-12 02:53:15)
Offline
I understand basic commands, and also that I may try underscan option of xrandr, but as verbose lists many more options than what is in plain xrandr, I was hoping one of them would work without further hustle, however I don't know how to translate it to create a new entry for xranrd. (Of course I'm interested in 1080.)
Offline
What verbose lists are just the same modes (resolution@refresh rate) as those listed in "plain" but in details. If you really suspect that these modes are not precisely correct for your TV, you need to create custom modelines instead.
But again, I don't think it's what you should dwell into, but really just pick up the remote control and look for the overscan option on the TV...
Last edited by tom.ty89 (2017-04-12 16:26:51)
Offline
I will try that, but what makes me suspicious is that with same laptop/tv and windows I had no such problem. If I want to manually set the underscan in xrandr, can you please write an example of such command, assuming it is safe to do so?
Offline
Well, you didn't mention that overscan did not happen in Windows. Though it could be in Windows the driver is doing underscan (unlikely unless explicit configured though).
I have no experience setting underscan anyway, you may want to check out the man page of xrandr. And yes it is safe, xrandr effects are volatile, so in the worse case you type reboot and press enter, then you'll be fine again. (Obviously, if you want them to be persistent, you need to have the commands in certain X startup script, depending on your DE / how you start X)
Offline
Ok, so here's the problem: either with Windows, or using Linux and resolution 1360x768, I get no overscan; however, in Linux and 1080 the problem is there. There is no option to turn it off in the TV menu, and if I issue
xrandr --output HDMI-2 --set underscan on
I get
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 38
Current serial number in output stream: 38
Any hint or suggestions?
Offline
It's possible/likely that your TV have "smart" strategy on overscan instead of an option, that is, it assume you don't want it when use it as a computer screen (1360x768), but do want it when it is used as a TV/movie screen (1920x1080). Silly CEA/VESA resolution "categorization".
Okay, back to xrandr. Are you using the modesetting DDX (no xf86-video-* installed) or otherwise? Your xorg log (~/.local/share/xorg/) can be helpful on this.
Apparently you need to specify parameters for it:
https://wiki.archlinux.org/index.php/Xr … esolutions
Offline
I think your intuition is correct: I checked back at Windows, and no resolution can be chosen, so I assume it is 768, which works fine in Linux as well. Moreover, the TV documents say that PC can only be connected through VGA at 768 (crappy TV!), and no overscan/underscan option can be tuned, which in fact is not advertised with the EDID in verbose output of xrandr. So I guess I'm not facing a real 'problem' here, as everything woks as expected; the only curiosity at this point is whether I can trick it to be used with PC at 1080 without correcting the borders.
I don't fully understand your last question, but pacman -Q gives these
xf86-input-evdev 2.10.5-1
xf86-input-libinput 0.25.0-1
xf86vidmodeproto 2.3.1-3
and I have two such files, the first
[ 787.930] (--) Log file renamed from "/home/nicolo/.local/share/xorg/Xorg.pid-3247.log" to "/home/nicolo/.local/share/xorg/Xorg.0.log"
[ 787.930]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 787.930] X Protocol Version 11, Revision 0
[ 787.930] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[ 787.930] Current Operating System: Linux ajax 4.10.9-1-ARCH #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017 x86_64
[ 787.930] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw
[ 787.930] Build Date: 07 April 2017 05:42:48PM
[ 787.930]
[ 787.930] Current version of pixman: 0.34.0
[ 787.930] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 787.930] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 787.930] (==) Log file: "/home/nicolo/.local/share/xorg/Xorg.0.log", Time: Wed Apr 12 22:12:59 2017
[ 787.931] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 787.931] (==) No Layout section. Using the first Screen section.
[ 787.931] (==) No screen section available. Using defaults.
[ 787.931] (**) |-->Screen "Default Screen Section" (0)
[ 787.931] (**) | |-->Monitor "<default monitor>"
[ 787.931] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 787.931] (==) Automatically adding devices
[ 787.931] (==) Automatically enabling devices
[ 787.931] (==) Automatically adding GPU devices
[ 787.931] (==) Automatically binding GPU devices
[ 787.931] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 787.931] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 787.931] Entry deleted from font path.
[ 787.931] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 787.931] Entry deleted from font path.
[ 787.931] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 787.931] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 787.931] Entry deleted from font path.
[ 787.931] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 787.931] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 787.931] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 787.931] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 787.932] (II) Loader magic: 0x822d60
[ 787.932] (II) Module ABI versions:
[ 787.932] X.Org ANSI C Emulation: 0.4
[ 787.932] X.Org Video Driver: 23.0
[ 787.932] X.Org XInput driver : 24.1
[ 787.932] X.Org Server Extension : 10.0
[ 787.932] (++) using VT number 2
[ 787.934] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 787.934] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 787.935] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 787.936] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2233 rev 7, Mem @ 0xe0000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[ 787.936] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 787.936] (II) LoadModule: "glx"
[ 787.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 787.937] (II) Module glx: vendor="X.Org Foundation"
[ 787.937] compiled for 1.19.3, module version = 1.0.0
[ 787.937] ABI class: X.Org Server Extension, version 10.0
[ 787.937] (==) Matched intel as autoconfigured driver 0
[ 787.937] (==) Matched intel as autoconfigured driver 1
[ 787.937] (==) Matched modesetting as autoconfigured driver 2
[ 787.937] (==) Matched fbdev as autoconfigured driver 3
[ 787.937] (==) Matched vesa as autoconfigured driver 4
[ 787.937] (==) Assigned the driver to the xf86ConfigLayout
[ 787.937] (II) LoadModule: "intel"
[ 787.938] (WW) Warning, couldn't open module intel
[ 787.938] (II) UnloadModule: "intel"
[ 787.938] (II) Unloading intel
[ 787.938] (EE) Failed to load module "intel" (module does not exist, 0)
[ 787.938] (II) LoadModule: "modesetting"
[ 787.938] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 787.938] (II) Module modesetting: vendor="X.Org Foundation"
[ 787.938] compiled for 1.19.3, module version = 1.19.3
[ 787.938] Module class: X.Org Video Driver
[ 787.938] ABI class: X.Org Video Driver, version 23.0
[ 787.938] (II) LoadModule: "fbdev"
[ 787.938] (WW) Warning, couldn't open module fbdev
[ 787.938] (II) UnloadModule: "fbdev"
[ 787.938] (II) Unloading fbdev
[ 787.938] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 787.938] (II) LoadModule: "vesa"
[ 787.938] (WW) Warning, couldn't open module vesa
[ 787.938] (II) UnloadModule: "vesa"
[ 787.938] (II) Unloading vesa
[ 787.938] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 787.938] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 787.938] (II) modeset(0): using drv /dev/dri/card0
[ 787.939] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 787.939] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 787.939] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 787.939] (==) modeset(0): RGB weight 888
[ 787.939] (==) modeset(0): Default visual is TrueColor
[ 787.939] (II) Loading sub module "glamoregl"
[ 787.939] (II) LoadModule: "glamoregl"
[ 787.939] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 787.940] (II) Module glamoregl: vendor="X.Org Foundation"
[ 787.940] compiled for 1.19.3, module version = 1.0.0
[ 787.940] ABI class: X.Org ANSI C Emulation, version 0.4
[ 787.940] (II) glamor: OpenGL accelerated X.org driver based.
[ 787.948] (II) glamor: EGL version 1.4 (DRI2):
[ 787.951] (II) modeset(0): glamor initialized
[ 787.952] (II) modeset(0): Output eDP-1 has no monitor section
[ 787.952] (II) modeset(0): Output DP-1 has no monitor section
[ 788.117] (II) modeset(0): Output HDMI-1 has no monitor section
[ 788.384] (II) modeset(0): Output DP-2 has no monitor section
[ 788.472] (II) modeset(0): Output HDMI-2 has no monitor section
[ 788.474] (II) modeset(0): EDID for output eDP-1
[ 788.474] (II) modeset(0): Manufacturer: MEI Model: 96a2 Serial#: 0
[ 788.474] (II) modeset(0): Year: 2015 Week: 255
[ 788.474] (II) modeset(0): EDID Version: 1.4
[ 788.474] (II) modeset(0): Digital Display Input
[ 788.474] (II) modeset(0): 8 bits per channel
[ 788.474] (II) modeset(0): Digital interface is DisplayPort
[ 788.474] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 788.474] (II) modeset(0): Gamma: 2.20
[ 788.474] (II) modeset(0): No DPMS capabilities specified
[ 788.474] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 788.474] (II) modeset(0): First detailed timing is preferred mode
[ 788.474] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 788.474] (II) modeset(0): redX: 0.642 redY: 0.318 greenX: 0.295 greenY: 0.608
[ 788.474] (II) modeset(0): blueX: 0.153 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 788.474] (II) modeset(0): Manufacturer's mask: 0
[ 788.474] (II) modeset(0): Supported detailed timing:
[ 788.474] (II) modeset(0): clock: 257.5 MHz Image Size: 310 x 170 mm
[ 788.474] (II) modeset(0): h_active: 2560 h_sync: 2648 h_sync_end 2680 h_blank_end 2800 h_border: 0
[ 788.474] (II) modeset(0): v_active: 1440 v_sync: 1468 v_sync_end 1473 v_blanking: 1533 v_border: 0
[ 788.474] (II) modeset(0): Supported detailed timing:
[ 788.474] (II) modeset(0): clock: 257.5 MHz Image Size: 310 x 170 mm
[ 788.474] (II) modeset(0): h_active: 2560 h_sync: 2648 h_sync_end 2680 h_blank_end 2800 h_border: 0
[ 788.474] (II) modeset(0): v_active: 1440 v_sync: 1468 v_sync_end 1473 v_blanking: 1916 v_border: 0
[ 788.474] (II) modeset(0): Ranges: V min: 46 V max: 62 Hz, H min: 89 H max: 94 kHz, PixClock max 265 MHz
[ 788.474] (II) modeset(0): VVX14T058J02
[ 788.474] (II) modeset(0): EDID (in hex):
[ 788.474] (II) modeset(0): 00ffffffffffff0034a9a29600000000
[ 788.474] (II) modeset(0): ff190104a51f1178026b65a4514b9b27
[ 788.474] (II) modeset(0): 0f505400000001010101010101010101
[ 788.474] (II) modeset(0): 0101010101019a6400f0a0a05d505820
[ 788.474] (II) modeset(0): c50435ad1000001e976400f0a0a0dc51
[ 788.474] (II) modeset(0): 5820c50435ad1000001e000000fd002e
[ 788.474] (II) modeset(0): 3e595e1a010a202020202020000000fe
[ 788.474] (II) modeset(0): 005656583134543035384a30320a0008
[ 788.474] (II) modeset(0): Printing probed modes for output eDP-1
[ 788.474] (II) modeset(0): Modeline "2560x1440"x60.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 788.474] (II) modeset(0): Modeline "2560x1440"x48.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 788.474] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 788.474] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 788.474] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 788.474] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 788.474] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 788.474] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 788.474] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 788.474] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 788.474] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 788.474] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 788.474] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 788.474] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 788.474] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 788.474] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 788.474] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 788.474] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 788.474] (II) modeset(0): EDID for output DP-1
[ 788.640] (II) modeset(0): EDID for output HDMI-1
[ 788.908] (II) modeset(0): EDID for output DP-2
[ 788.995] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 788.995] (II) modeset(0): EDID for output HDMI-2
[ 788.995] (II) modeset(0): Manufacturer: XXX Model: 0 Serial#: 16843009
[ 788.995] (II) modeset(0): Year: 2014 Week: 1
[ 788.995] (II) modeset(0): EDID Version: 1.3
[ 788.995] (II) modeset(0): Digital Display Input
[ 788.995] (II) modeset(0): Indeterminate output size
[ 788.995] (II) modeset(0): Gamma: 2.20
[ 788.995] (II) modeset(0): No DPMS capabilities specified
[ 788.995] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 788.995] (II) modeset(0): First detailed timing is preferred mode
[ 788.995] (II) modeset(0): redX: 0.636 redY: 0.349 greenX: 0.290 greenY: 0.589
[ 788.995] (II) modeset(0): blueX: 0.143 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 788.995] (II) modeset(0): Supported established timings:
[ 788.995] (II) modeset(0): 720x400@70Hz
[ 788.995] (II) modeset(0): 640x480@60Hz
[ 788.995] (II) modeset(0): 640x480@72Hz
[ 788.995] (II) modeset(0): 640x480@75Hz
[ 788.995] (II) modeset(0): 800x600@60Hz
[ 788.995] (II) modeset(0): 800x600@72Hz
[ 788.995] (II) modeset(0): 800x600@75Hz
[ 788.995] (II) modeset(0): 1024x768@60Hz
[ 788.995] (II) modeset(0): 1024x768@70Hz
[ 788.995] (II) modeset(0): 1024x768@75Hz
[ 788.995] (II) modeset(0): Manufacturer's mask: 0
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 85.5 MHz Image Size: 760 x 450 mm
[ 788.995] (II) modeset(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 788.995] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 79.5 MHz Image Size: 760 x 450 mm
[ 788.995] (II) modeset(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0
[ 788.995] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0
[ 788.995] (II) modeset(0): Monitor name: WXGA TV
[ 788.995] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 65 kHz, PixClock max 149 MHz
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 148.5 MHz Image Size: 880 x 490 mm
[ 788.995] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 788.995] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 74.2 MHz Image Size: 500 x 281 mm
[ 788.995] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 788.995] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 27.0 MHz Image Size: 600 x 450 mm
[ 788.995] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 794 h_blank_end 858 h_border: 0
[ 788.995] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 788.995] (II) modeset(0): Supported detailed timing:
[ 788.995] (II) modeset(0): clock: 27.0 MHz Image Size: 800 x 450 mm
[ 788.995] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 788.995] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 788.995] (II) modeset(0): Number of EDID sections to follow: 1
[ 788.996] (II) modeset(0): EDID (in hex):
[ 788.996] (II) modeset(0): 00ffffffffffff006318000001010101
[ 788.996] (II) modeset(0): 01180103800000780ad7a5a2594a9624
[ 788.996] (II) modeset(0): 145054adce0001010101010101010101
[ 788.996] (II) modeset(0): 010101010101662150b051001b304070
[ 788.996] (II) modeset(0): 3600f8c22100001e0e1f008051001e30
[ 788.996] (II) modeset(0): 40803700f8c22100001c000000fc0057
[ 788.996] (II) modeset(0): 5847412054560a2020202020000000fd
[ 788.996] (II) modeset(0): 00324c1e410b000a2020202020200117
[ 788.996] (II) modeset(0): 02032df1509005040203060711121314
[ 788.996] (II) modeset(0): 15161f01202609070715072483010000
[ 788.996] (II) modeset(0): 6c030c001000001ec001010101023a80
[ 788.996] (II) modeset(0): 1871382d40582c450070ea3100001e01
[ 788.996] (II) modeset(0): 1d8018711c1620582c2500f419110000
[ 788.996] (II) modeset(0): 9e8c0ad08a20e02d10103a960058c221
[ 788.996] (II) modeset(0): 0000188c0ad08a20e02d10103e960020
[ 788.996] (II) modeset(0): c23100001800000000000000000000e9
[ 788.996] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 788.996] (II) modeset(0): Printing probed modes for output HDMI-2
[ 788.996] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 788.996] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 788.996] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 788.996] (II) modeset(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 788.996] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 788.996] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 788.996] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 788.996] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 788.996] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 788.996] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 788.996] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 794 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 788.996] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 788.996] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 788.996] (II) modeset(0): Output eDP-1 connected
[ 788.996] (II) modeset(0): Output DP-1 disconnected
[ 788.996] (II) modeset(0): Output HDMI-1 disconnected
[ 788.996] (II) modeset(0): Output DP-2 disconnected
[ 788.996] (II) modeset(0): Output HDMI-2 connected
[ 788.996] (II) modeset(0): Using spanning desktop for initial modes
[ 788.996] (II) modeset(0): Output eDP-1 using initial mode 2560x1440 +0+0
[ 788.996] (II) modeset(0): Output HDMI-2 using initial mode 1360x768 +2560+0
[ 788.996] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 788.996] (==) modeset(0): DPI set to (96, 96)
[ 788.996] (II) Loading sub module "fb"
[ 788.996] (II) LoadModule: "fb"
[ 788.996] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 788.998] (II) Module fb: vendor="X.Org Foundation"
[ 788.998] compiled for 1.19.3, module version = 1.0.0
[ 788.998] ABI class: X.Org ANSI C Emulation, version 0.4
[ 788.998] (==) Depth 24 pixmap format is 32 bpp
[ 789.144] (==) modeset(0): Backing store enabled
[ 789.144] (==) modeset(0): Silken mouse enabled
[ 789.146] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 789.190] (==) modeset(0): DPMS enabled
[ 789.190] (II) modeset(0): [DRI2] Setup complete
[ 789.190] (II) modeset(0): [DRI2] DRI driver: i965
[ 789.190] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 789.190] (--) RandR disabled
[ 789.199] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 789.199] (II) AIGLX: enabled GLX_ARB_create_context
[ 789.199] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 789.199] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 789.199] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 789.199] (II) AIGLX: enabled GLX_SGI_swap_control
[ 789.199] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 789.199] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 789.199] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 789.199] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 789.199] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 789.199] (II) AIGLX: Loaded and initialized i965
[ 789.199] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 789.202] (II) modeset(0): Damage tracking initialized
[ 789.202] (II) modeset(0): Setting screen physical size to 1037 x 381
[ 789.238] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 789.238] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 789.238] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 789.238] (II) LoadModule: "libinput"
[ 789.238] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 789.240] (II) Module libinput: vendor="X.Org Foundation"
[ 789.240] compiled for 1.19.2, module version = 0.25.0
[ 789.240] Module class: X.Org XInput Driver
[ 789.240] ABI class: X.Org XInput driver, version 24.1
[ 789.240] (II) Using input driver 'libinput' for 'Power Button'
[ 789.240] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
[ 789.240] (**) Power Button: always reports core events
[ 789.240] (**) Option "Device" "/dev/input/event2"
[ 789.240] (**) Option "_source" "server/udev"
[ 789.240] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 789.240] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 789.241] (II) event2 - (II) Power Button: (II) device removed
[ 789.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 789.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 789.241] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 789.241] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 789.241] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 789.241] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 789.241] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 789.241] (II) Using input driver 'libinput' for 'Video Bus'
[ 789.242] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[ 789.242] (**) Video Bus: always reports core events
[ 789.242] (**) Option "Device" "/dev/input/event3"
[ 789.242] (**) Option "_source" "server/udev"
[ 789.242] (II) event3 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 789.242] (II) event3 - (II) Video Bus: (II) device is a keyboard
[ 789.242] (II) event3 - (II) Video Bus: (II) device removed
[ 789.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 789.242] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 789.242] (II) event3 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 789.242] (II) event3 - (II) Video Bus: (II) device is a keyboard
[ 789.243] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 789.243] (II) No input driver specified, ignoring this device.
[ 789.243] (II) This device may have been added with another device file.
[ 789.243] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 789.243] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 789.243] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 789.243] (II) Using input driver 'libinput' for 'Sleep Button'
[ 789.243] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[ 789.243] (**) Sleep Button: always reports core events
[ 789.243] (**) Option "Device" "/dev/input/event1"
[ 789.243] (**) Option "_source" "server/udev"
[ 789.244] (II) event1 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 789.244] (II) event1 - (II) Sleep Button: (II) device is a keyboard
[ 789.244] (II) event1 - (II) Sleep Button: (II) device removed
[ 789.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 789.244] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 789.244] (II) event1 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 789.244] (II) event1 - (II) Sleep Button: (II) device is a keyboard
[ 789.245] (II) config/udev: Adding input device Integrated Camera (/dev/input/event16)
[ 789.245] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 789.245] (**) Integrated Camera: Applying InputClass "libinput keyboard catchall"
[ 789.245] (II) Using input driver 'libinput' for 'Integrated Camera'
[ 789.245] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 26 paused 0
[ 789.245] (**) Integrated Camera: always reports core events
[ 789.245] (**) Option "Device" "/dev/input/event16"
[ 789.245] (**) Option "_source" "server/udev"
[ 789.245] (II) event16 - (II) Integrated Camera: (II) is tagged by udev as: Keyboard
[ 789.245] (II) event16 - (II) Integrated Camera: (II) device is a keyboard
[ 789.245] (II) event16 - (II) Integrated Camera: (II) device removed
[ 789.245] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18/event16"
[ 789.245] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 789.246] (II) event16 - (II) Integrated Camera: (II) is tagged by udev as: Keyboard
[ 789.246] (II) event16 - (II) Integrated Camera: (II) device is a keyboard
[ 789.246] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event8)
[ 789.246] (II) No input driver specified, ignoring this device.
[ 789.246] (II) This device may have been added with another device file.
[ 789.246] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 789.246] (II) No input driver specified, ignoring this device.
[ 789.246] (II) This device may have been added with another device file.
[ 789.246] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event10)
[ 789.246] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.247] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 789.247] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.247] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 789.247] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.247] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 789.247] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.247] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 789.247] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.247] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 789.247] (II) No input driver specified, ignoring this device.
[ 789.247] (II) This device may have been added with another device file.
[ 789.248] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 789.248] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 789.248] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 789.248] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 789.248] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 789.248] (**) AT Translated Set 2 keyboard: always reports core events
[ 789.248] (**) Option "Device" "/dev/input/event4"
[ 789.248] (**) Option "_source" "server/udev"
[ 789.248] (II) event4 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 789.248] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 789.248] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 789.249] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 789.249] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 789.249] (II) event4 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 789.249] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 789.249] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 789.249] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 789.249] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 789.249] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 789.250] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 28 paused 0
[ 789.250] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 789.250] (**) Option "Device" "/dev/input/event15"
[ 789.250] (**) Option "_source" "server/udev"
[ 789.250] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 789.250] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device is a atouchpad
[ 789.250] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 789.250] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[ 789.250] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 789.250] (**) Option "AccelerationScheme" "none"
[ 789.250] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 789.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 789.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 789.250] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 789.251] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device is a atouchpad
[ 789.251] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 789.251] (II) No input driver specified, ignoring this device.
[ 789.251] (II) This device may have been added with another device file.
[ 789.251] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[ 789.251] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 789.251] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 789.251] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 789.251] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 29 paused 0
[ 789.252] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 789.252] (**) Option "Device" "/dev/input/event17"
[ 789.252] (**) Option "_source" "server/udev"
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) set to const accel 1.00
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[ 789.252] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[ 789.252] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 789.252] (**) Option "AccelerationScheme" "none"
[ 789.252] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 789.252] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 789.252] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) set to const accel 1.00
[ 789.252] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[ 789.252] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 789.253] (II) No input driver specified, ignoring this device.
[ 789.253] (II) This device may have been added with another device file.
[ 789.253] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 789.253] (II) No input driver specified, ignoring this device.
[ 789.253] (II) This device may have been added with another device file.
[ 789.253] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 789.253] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 789.253] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 789.253] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 789.253] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[ 789.254] (**) ThinkPad Extra Buttons: always reports core events
[ 789.254] (**) Option "Device" "/dev/input/event5"
[ 789.254] (**) Option "_source" "server/udev"
[ 789.254] (II) event5 - (II) ThinkPad Extra Buttons: (II) is tagged by udev as: Keyboard
[ 789.254] (II) event5 - (II) ThinkPad Extra Buttons: (II) device is a keyboard
[ 789.254] (II) event5 - (II) ThinkPad Extra Buttons: (II) device removed
[ 789.254] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[ 789.254] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 789.254] (II) event5 - (II) ThinkPad Extra Buttons: (II) is tagged by udev as: Keyboard
[ 789.254] (II) event5 - (II) ThinkPad Extra Buttons: (II) device is a keyboard
[ 860.079] (WW) EDID timing clock 148.50 exceeds claimed max 115MHz, fixing
[ 860.079] (II) modeset(0): EDID vendor "XXX", prod id 0
[ 860.079] (II) modeset(0): Using EDID range info for horizontal sync
[ 860.079] (II) modeset(0): Using EDID range info for vertical refresh
[ 860.079] (II) modeset(0): Printing DDC gathered Modelines:
[ 860.079] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
[ 860.079] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 860.079] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 860.079] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 794 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 860.079] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 860.079] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 860.079] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 860.079] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 860.079] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 860.079] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 860.079] (II) modeset(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 860.079] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 860.079] (II) modeset(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 860.079] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 860.079] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 860.079] (II) modeset(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 860.079] (II) modeset(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 860.079] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 860.079] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 860.079] (--) modeset(0): HDMI max TMDS frequency 150000KHz
[ 878.446] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 1197.473] (II) modeset(0): Allocate new frame buffer 3920x1440 stride
[ 1811.011] (II) modeset(0): Allocate new frame buffer 4480x1440 stride
[ 1989.777] (**) Option "fd" "21"
[ 1989.777] (II) event2 - (II) Power Button: (II) device removed
[ 1989.777] (**) Option "fd" "24"
[ 1989.777] (II) event3 - (II) Video Bus: (II) device removed
[ 1989.777] (**) Option "fd" "25"
[ 1989.777] (II) event1 - (II) Sleep Button: (II) device removed
[ 1989.777] (**) Option "fd" "26"
[ 1989.778] (II) event16 - (II) Integrated Camera: (II) device removed
[ 1989.778] (**) Option "fd" "27"
[ 1989.778] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 1989.778] (**) Option "fd" "28"
[ 1989.778] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 1989.778] (**) Option "fd" "29"
[ 1989.778] (II) event17 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[ 1989.778] (**) Option "fd" "30"
[ 1989.779] (II) event5 - (II) ThinkPad Extra Buttons: (II) device removed
[ 1989.780] (II) UnloadModule: "libinput"
[ 1989.780] (II) systemd-logind: releasing fd for 13:69
[ 1989.810] (II) UnloadModule: "libinput"
[ 1989.810] (II) systemd-logind: releasing fd for 13:81
[ 1989.850] (II) UnloadModule: "libinput"
[ 1989.850] (II) systemd-logind: releasing fd for 13:79
[ 1989.900] (II) UnloadModule: "libinput"
[ 1989.900] (II) systemd-logind: releasing fd for 13:68
[ 1989.940] (II) UnloadModule: "libinput"
[ 1989.940] (II) systemd-logind: releasing fd for 13:80
[ 1989.980] (II) UnloadModule: "libinput"
[ 1989.980] (II) systemd-logind: releasing fd for 13:65
[ 1990.000] (II) UnloadModule: "libinput"
[ 1990.000] (II) systemd-logind: releasing fd for 13:67
[ 1990.020] (II) UnloadModule: "libinput"
[ 1990.020] (II) systemd-logind: releasing fd for 13:66
[ 1991.223] (II) Server terminated successfully (0). Closing log file.
and the second
[ 18.235] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 18.235] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 18.235] (--) Log file renamed from "/home/nicolo/.local/share/xorg/Xorg.pid-629.log" to "/home/nicolo/.local/share/xorg/Xorg.1.log"
[ 18.236]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 18.236] X Protocol Version 11, Revision 0
[ 18.236] Build Operating System: Linux 4.5.4-1-ARCH x86_64
[ 18.236] Current Operating System: Linux thinkpad 4.8.4-1-ARCH #1 SMP PREEMPT Sat Oct 22 18:26:57 CEST 2016 x86_64
[ 18.236] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw
[ 18.236] Build Date: 19 July 2016 05:54:24PM
[ 18.236]
[ 18.236] Current version of pixman: 0.34.0
[ 18.236] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.236] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.236] (==) Log file: "/home/nicolo/.local/share/xorg/Xorg.1.log", Time: Sat Oct 29 17:58:08 2016
[ 18.236] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.236] (==) No Layout section. Using the first Screen section.
[ 18.236] (==) No screen section available. Using defaults.
[ 18.236] (**) |-->Screen "Default Screen Section" (0)
[ 18.236] (**) | |-->Monitor "<default monitor>"
[ 18.236] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.236] (==) Automatically adding devices
[ 18.236] (==) Automatically enabling devices
[ 18.236] (==) Automatically adding GPU devices
[ 18.236] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 18.236] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 18.236] Entry deleted from font path.
[ 18.236] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.236] Entry deleted from font path.
[ 18.236] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.236] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.236] Entry deleted from font path.
[ 18.236] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.236] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 18.236] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.236] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.237] (II) Loader magic: 0x821d40
[ 18.237] (II) Module ABI versions:
[ 18.237] X.Org ANSI C Emulation: 0.4
[ 18.237] X.Org Video Driver: 20.0
[ 18.237] X.Org XInput driver : 22.1
[ 18.237] X.Org Server Extension : 9.0
[ 18.238] (++) using VT number 2
[ 18.241] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 18.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.242] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 18.244] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2233 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[ 18.244] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.244] (II) LoadModule: "glx"
[ 18.245] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.246] (II) Module glx: vendor="X.Org Foundation"
[ 18.246] compiled for 1.18.4, module version = 1.0.0
[ 18.246] ABI class: X.Org Server Extension, version 9.0
[ 18.246] (==) AIGLX enabled
[ 18.246] (==) Matched intel as autoconfigured driver 0
[ 18.246] (==) Matched intel as autoconfigured driver 1
[ 18.246] (==) Matched modesetting as autoconfigured driver 2
[ 18.246] (==) Matched fbdev as autoconfigured driver 3
[ 18.246] (==) Matched vesa as autoconfigured driver 4
[ 18.246] (==) Assigned the driver to the xf86ConfigLayout
[ 18.246] (II) LoadModule: "intel"
[ 18.246] (WW) Warning, couldn't open module intel
[ 18.246] (II) UnloadModule: "intel"
[ 18.247] (II) Unloading intel
[ 18.247] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.247] (II) LoadModule: "modesetting"
[ 18.247] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.247] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.247] compiled for 1.18.4, module version = 1.18.4
[ 18.247] Module class: X.Org Video Driver
[ 18.247] ABI class: X.Org Video Driver, version 20.0
[ 18.247] (II) LoadModule: "fbdev"
[ 18.247] (WW) Warning, couldn't open module fbdev
[ 18.247] (II) UnloadModule: "fbdev"
[ 18.247] (II) Unloading fbdev
[ 18.247] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.247] (II) LoadModule: "vesa"
[ 18.247] (WW) Warning, couldn't open module vesa
[ 18.247] (II) UnloadModule: "vesa"
[ 18.247] (II) Unloading vesa
[ 18.247] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.247] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.247] (II) modeset(0): using drv /dev/dri/card0
[ 18.247] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 18.247] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.247] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 18.247] (==) modeset(0): RGB weight 888
[ 18.247] (==) modeset(0): Default visual is TrueColor
[ 18.247] (II) Loading sub module "glamoregl"
[ 18.247] (II) LoadModule: "glamoregl"
[ 18.248] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.253] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.253] compiled for 1.18.4, module version = 1.0.0
[ 18.253] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.253] (II) glamor: OpenGL accelerated X.org driver based.
[ 18.271] (II) glamor: EGL version 1.4 (DRI2):
[ 18.273] (II) modeset(0): glamor initialized
[ 19.005] (II) modeset(0): Output eDP-1 has no monitor section
[ 19.007] (II) modeset(0): Output DP-1 has no monitor section
[ 19.140] (II) modeset(0): Output HDMI-1 has no monitor section
[ 19.143] (II) modeset(0): Output DP-2 has no monitor section
[ 19.277] (II) modeset(0): Output HDMI-2 has no monitor section
[ 19.278] (II) modeset(0): EDID for output eDP-1
[ 19.278] (II) modeset(0): Manufacturer: MEI Model: 96a2 Serial#: 0
[ 19.278] (II) modeset(0): Year: 2015 Week: 255
[ 19.278] (II) modeset(0): EDID Version: 1.4
[ 19.278] (II) modeset(0): Digital Display Input
[ 19.278] (II) modeset(0): 8 bits per channel
[ 19.278] (II) modeset(0): Digital interface is DisplayPort
[ 19.278] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 19.278] (II) modeset(0): Gamma: 2.20
[ 19.278] (II) modeset(0): No DPMS capabilities specified
[ 19.279] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 19.279] (II) modeset(0): First detailed timing is preferred mode
[ 19.279] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 19.279] (II) modeset(0): redX: 0.642 redY: 0.318 greenX: 0.295 greenY: 0.608
[ 19.279] (II) modeset(0): blueX: 0.153 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 19.279] (II) modeset(0): Manufacturer's mask: 0
[ 19.279] (II) modeset(0): Supported detailed timing:
[ 19.279] (II) modeset(0): clock: 257.5 MHz Image Size: 310 x 170 mm
[ 19.279] (II) modeset(0): h_active: 2560 h_sync: 2648 h_sync_end 2680 h_blank_end 2800 h_border: 0
[ 19.279] (II) modeset(0): v_active: 1440 v_sync: 1468 v_sync_end 1473 v_blanking: 1533 v_border: 0
[ 19.279] (II) modeset(0): Supported detailed timing:
[ 19.279] (II) modeset(0): clock: 257.5 MHz Image Size: 310 x 170 mm
[ 19.279] (II) modeset(0): h_active: 2560 h_sync: 2648 h_sync_end 2680 h_blank_end 2800 h_border: 0
[ 19.279] (II) modeset(0): v_active: 1440 v_sync: 1468 v_sync_end 1473 v_blanking: 1916 v_border: 0
[ 19.279] (II) modeset(0): Ranges: V min: 46 V max: 62 Hz, H min: 89 H max: 94 kHz, PixClock max 265 MHz
[ 19.279] (II) modeset(0): VVX14T058J02
[ 19.279] (II) modeset(0): EDID (in hex):
[ 19.279] (II) modeset(0): 00ffffffffffff0034a9a29600000000
[ 19.279] (II) modeset(0): ff190104a51f1178026b65a4514b9b27
[ 19.279] (II) modeset(0): 0f505400000001010101010101010101
[ 19.279] (II) modeset(0): 0101010101019a6400f0a0a05d505820
[ 19.279] (II) modeset(0): c50435ad1000001e976400f0a0a0dc51
[ 19.279] (II) modeset(0): 5820c50435ad1000001e000000fd002e
[ 19.279] (II) modeset(0): 3e595e1a010a202020202020000000fe
[ 19.279] (II) modeset(0): 005656583134543035384a30320a0008
[ 19.280] (II) modeset(0): Printing probed modes for output eDP-1
[ 19.280] (II) modeset(0): Modeline "2560x1440"x60.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 19.280] (II) modeset(0): Modeline "2560x1440"x48.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 19.280] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 19.280] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 19.280] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 19.280] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 19.280] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 19.280] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 19.280] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 19.280] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 19.280] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 19.280] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 19.280] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 19.280] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 19.280] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 19.280] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 19.280] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 19.280] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 19.283] (II) modeset(0): EDID for output DP-1
[ 19.413] (II) modeset(0): EDID for output HDMI-1
[ 19.415] (II) modeset(0): EDID for output DP-2
[ 19.547] (II) modeset(0): EDID for output HDMI-2
[ 19.547] (II) modeset(0): Output eDP-1 connected
[ 19.547] (II) modeset(0): Output DP-1 disconnected
[ 19.547] (II) modeset(0): Output HDMI-1 disconnected
[ 19.547] (II) modeset(0): Output DP-2 disconnected
[ 19.547] (II) modeset(0): Output HDMI-2 disconnected
[ 19.547] (II) modeset(0): Using exact sizes for initial modes
[ 19.547] (II) modeset(0): Output eDP-1 using initial mode 2560x1440 +0+0
[ 19.547] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.547] (==) modeset(0): DPI set to (96, 96)
[ 19.547] (II) Loading sub module "fb"
[ 19.547] (II) LoadModule: "fb"
[ 19.547] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.548] (II) Module fb: vendor="X.Org Foundation"
[ 19.548] compiled for 1.18.4, module version = 1.0.0
[ 19.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.548] (==) Depth 24 pixmap format is 32 bpp
[ 19.616] (==) modeset(0): Backing store enabled
[ 19.616] (==) modeset(0): Silken mouse enabled
[ 19.616] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.616] (==) modeset(0): DPMS enabled
[ 19.616] (II) modeset(0): [DRI2] Setup complete
[ 19.616] (II) modeset(0): [DRI2] DRI driver: i965
[ 19.616] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 19.864] (--) RandR disabled
[ 19.896] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.896] (II) AIGLX: enabled GLX_ARB_create_context
[ 19.896] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 19.896] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 19.896] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.896] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.896] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 19.896] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 19.896] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 19.896] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.896] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 19.896] (II) AIGLX: Loaded and initialized i965
[ 19.896] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.932] (II) modeset(0): Damage tracking initialized
[ 19.932] (II) modeset(0): Setting screen physical size to 677 x 381
[ 19.984] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.984] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.984] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.984] (II) LoadModule: "libinput"
[ 19.984] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 19.985] (II) Module libinput: vendor="X.Org Foundation"
[ 19.985] compiled for 1.18.4, module version = 0.22.0
[ 19.985] Module class: X.Org XInput Driver
[ 19.985] ABI class: X.Org XInput driver, version 22.1
[ 19.986] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[ 19.986] (II) Using input driver 'libinput' for 'Power Button'
[ 19.986] (**) Power Button: always reports core events
[ 19.986] (**) Option "Device" "/dev/input/event3"
[ 19.986] (**) Option "_source" "server/udev"
[ 19.986] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 19.986] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 19.986] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 19.986] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.986] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 19.986] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 19.987] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 19.987] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.987] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 19.987] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 17 paused 0
[ 19.987] (II) Using input driver 'libinput' for 'Video Bus'
[ 19.987] (**) Video Bus: always reports core events
[ 19.987] (**) Option "Device" "/dev/input/event6"
[ 19.987] (**) Option "_source" "server/udev"
[ 19.987] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 19.987] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 19.987] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 19.987] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.988] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 19.988] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 19.988] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 19.988] (II) No input driver specified, ignoring this device.
[ 19.988] (II) This device may have been added with another device file.
[ 19.988] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 19.988] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 19.988] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 19.988] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 18 paused 0
[ 19.988] (II) Using input driver 'libinput' for 'Sleep Button'
[ 19.989] (**) Sleep Button: always reports core events
[ 19.989] (**) Option "Device" "/dev/input/event2"
[ 19.989] (**) Option "_source" "server/udev"
[ 19.989] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 19.989] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 19.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 19.989] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 19.989] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 19.989] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 19.989] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17)
[ 19.989] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 19.989] (**) Integrated Camera: Applying InputClass "libinput keyboard catchall"
[ 19.990] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 19 paused 0
[ 19.990] (II) Using input driver 'libinput' for 'Integrated Camera'
[ 19.990] (**) Integrated Camera: always reports core events
[ 19.990] (**) Option "Device" "/dev/input/event17"
[ 19.990] (**) Option "_source" "server/udev"
[ 19.990] (II) input device 'Integrated Camera', /dev/input/event17 is tagged by udev as: Keyboard
[ 19.990] (II) input device 'Integrated Camera', /dev/input/event17 is a keyboard
[ 19.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18/event17"
[ 19.990] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 19.990] (II) input device 'Integrated Camera', /dev/input/event17 is tagged by udev as: Keyboard
[ 19.990] (II) input device 'Integrated Camera', /dev/input/event17 is a keyboard
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event8)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event10)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.991] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 19.991] (II) No input driver specified, ignoring this device.
[ 19.991] (II) This device may have been added with another device file.
[ 19.992] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 19.992] (II) No input driver specified, ignoring this device.
[ 19.992] (II) This device may have been added with another device file.
[ 19.992] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 19.992] (II) No input driver specified, ignoring this device.
[ 19.992] (II) This device may have been added with another device file.
[ 19.992] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 19.992] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.992] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 19.992] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[ 19.992] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 19.992] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.992] (**) Option "Device" "/dev/input/event0"
[ 19.992] (**) Option "_source" "server/udev"
[ 19.993] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 19.993] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 19.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 19.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 19.993] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 19.993] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 19.993] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 19.993] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 19.993] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 19.993] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 21 paused 0
[ 19.993] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 19.993] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.993] (**) Option "Device" "/dev/input/event15"
[ 19.993] (**) Option "_source" "server/udev"
[ 19.994] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is tagged by udev as: Touchpad
[ 19.994] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is a touchpad
[ 19.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[ 19.994] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 19.994] (**) Option "AccelerationScheme" "none"
[ 19.994] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 19.994] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 19.994] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 19.994] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is tagged by udev as: Touchpad
[ 19.994] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is a touchpad
[ 19.994] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 19.994] (II) No input driver specified, ignoring this device.
[ 19.994] (II) This device may have been added with another device file.
[ 19.995] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event16)
[ 19.995] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 19.995] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 19.995] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 22 paused 0
[ 19.995] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 19.995] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 19.995] (**) Option "Device" "/dev/input/event16"
[ 19.995] (**) Option "_source" "server/udev"
[ 19.995] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is tagged by udev as: Mouse Pointingstick
[ 19.995] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is a pointer caps
[ 19.995] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event16"
[ 19.995] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 19.995] (**) Option "AccelerationScheme" "none"
[ 19.995] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 19.995] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 19.995] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 19.996] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is tagged by udev as: Mouse Pointingstick
[ 19.996] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is a pointer caps
[ 19.996] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 19.996] (II) No input driver specified, ignoring this device.
[ 19.996] (II) This device may have been added with another device file.
[ 19.996] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 19.996] (II) No input driver specified, ignoring this device.
[ 19.996] (II) This device may have been added with another device file.
[ 19.996] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 19.996] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 19.996] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 19.997] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23 paused 0
[ 19.997] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 19.997] (**) ThinkPad Extra Buttons: always reports core events
[ 19.997] (**) Option "Device" "/dev/input/event4"
[ 19.997] (**) Option "_source" "server/udev"
[ 19.997] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 19.997] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is a keyboard
[ 19.997] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 19.997] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 19.997] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 19.997] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is a keyboard
[ 20.194] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 20.194] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 20.194] (II) modeset(0): Using EDID range info for horizontal sync
[ 20.194] (II) modeset(0): Using EDID range info for vertical refresh
[ 20.194] (II) modeset(0): Printing DDC gathered Modelines:
[ 20.194] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 20.194] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 22.606] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 22.606] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 22.606] (II) modeset(0): Using hsync ranges from config file
[ 22.606] (II) modeset(0): Using vrefresh ranges from config file
[ 22.606] (II) modeset(0): Printing DDC gathered Modelines:
[ 22.606] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 22.606] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 44.155] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 44.155] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 44.155] (II) modeset(0): Using hsync ranges from config file
[ 44.155] (II) modeset(0): Using vrefresh ranges from config file
[ 44.155] (II) modeset(0): Printing DDC gathered Modelines:
[ 44.155] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 44.155] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 69.389] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 69.389] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 69.389] (II) modeset(0): Using hsync ranges from config file
[ 69.389] (II) modeset(0): Using vrefresh ranges from config file
[ 69.389] (II) modeset(0): Printing DDC gathered Modelines:
[ 69.389] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 69.389] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 342.329] (**) Option "fd" "14"
[ 342.329] (**) Option "fd" "17"
[ 342.329] (**) Option "fd" "18"
[ 342.329] (**) Option "fd" "19"
[ 342.329] (**) Option "fd" "20"
[ 342.330] (**) Option "fd" "21"
[ 342.330] (**) Option "fd" "22"
[ 342.330] (**) Option "fd" "23"
[ 342.330] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 342.418] (II) systemd-logind: got pause for 13:68
[ 342.418] (II) systemd-logind: got pause for 13:64
[ 342.418] (II) systemd-logind: got pause for 13:79
[ 342.418] (II) systemd-logind: got pause for 13:70
[ 342.418] (II) systemd-logind: got pause for 13:67
[ 342.418] (II) systemd-logind: got pause for 13:80
[ 342.418] (II) systemd-logind: got pause for 13:81
[ 342.418] (II) systemd-logind: got pause for 13:66
[ 342.418] (II) systemd-logind: got pause for 226:0
[ 399.457] (II) systemd-logind: got resume for 13:68
[ 399.487] (II) systemd-logind: got resume for 13:64
[ 399.508] (II) systemd-logind: got resume for 13:79
[ 399.527] (II) systemd-logind: got resume for 13:70
[ 399.547] (II) systemd-logind: got resume for 13:67
[ 399.567] (II) systemd-logind: got resume for 13:80
[ 399.587] (II) systemd-logind: got resume for 13:81
[ 399.610] (II) systemd-logind: got resume for 13:66
[ 399.610] (II) systemd-logind: got resume for 226:0
[ 399.610] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 399.672] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 399.672] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 399.672] (II) modeset(0): Using hsync ranges from config file
[ 399.672] (II) modeset(0): Using vrefresh ranges from config file
[ 399.672] (II) modeset(0): Printing DDC gathered Modelines:
[ 399.672] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 399.672] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 399.955] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 399.955] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 399.956] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 399.956] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 399.957] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 399.957] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 399.958] (II) input device 'Integrated Camera', /dev/input/event17 is tagged by udev as: Keyboard
[ 399.958] (II) input device 'Integrated Camera', /dev/input/event17 is a keyboard
[ 399.959] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 399.959] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 399.959] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is tagged by udev as: Touchpad
[ 399.959] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is a touchpad
[ 399.960] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is tagged by udev as: Mouse Pointingstick
[ 399.960] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is a pointer caps
[ 399.960] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 399.960] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is a keyboard
[ 433.048] (**) Option "fd" "21"
[ 433.048] (**) Option "fd" "20"
[ 433.048] (**) Option "fd" "28"
[ 433.048] (**) Option "fd" "23"
[ 433.048] (**) Option "fd" "18"
[ 433.049] (**) Option "fd" "19"
[ 433.049] (**) Option "fd" "22"
[ 433.049] (**) Option "fd" "17"
[ 433.049] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 433.136] (II) systemd-logind: got pause for 13:68
[ 433.136] (II) systemd-logind: got pause for 13:64
[ 433.136] (II) systemd-logind: got pause for 13:79
[ 433.136] (II) systemd-logind: got pause for 13:70
[ 433.136] (II) systemd-logind: got pause for 13:67
[ 433.136] (II) systemd-logind: got pause for 13:80
[ 433.136] (II) systemd-logind: got pause for 13:81
[ 433.136] (II) systemd-logind: got pause for 13:66
[ 433.136] (II) systemd-logind: got pause for 226:0
[ 859.710] (II) systemd-logind: got resume for 13:68
[ 859.730] (II) systemd-logind: got resume for 13:64
[ 859.750] (II) systemd-logind: got resume for 13:79
[ 859.770] (II) systemd-logind: got resume for 13:70
[ 859.790] (II) systemd-logind: got resume for 13:67
[ 859.810] (II) systemd-logind: got resume for 13:80
[ 859.830] (II) systemd-logind: got resume for 13:81
[ 859.850] (II) systemd-logind: got resume for 13:66
[ 859.850] (II) systemd-logind: got resume for 226:0
[ 859.850] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 859.912] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 859.912] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 859.912] (II) modeset(0): Using hsync ranges from config file
[ 859.912] (II) modeset(0): Using vrefresh ranges from config file
[ 859.912] (II) modeset(0): Printing DDC gathered Modelines:
[ 859.912] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 859.912] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 860.194] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 860.194] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 860.194] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 860.194] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 860.195] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 860.195] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 860.195] (II) input device 'Integrated Camera', /dev/input/event17 is tagged by udev as: Keyboard
[ 860.195] (II) input device 'Integrated Camera', /dev/input/event17 is a keyboard
[ 860.196] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 860.196] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 860.196] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is tagged by udev as: Touchpad
[ 860.196] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is a touchpad
[ 860.196] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is tagged by udev as: Mouse Pointingstick
[ 860.196] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is a pointer caps
[ 860.197] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 860.197] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is a keyboard
[ 872.734] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 872.734] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 872.734] (II) modeset(0): Using hsync ranges from config file
[ 872.734] (II) modeset(0): Using vrefresh ranges from config file
[ 872.734] (II) modeset(0): Printing DDC gathered Modelines:
[ 872.734] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 872.734] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 879.447] (**) Option "fd" "22"
[ 879.448] (**) Option "fd" "21"
[ 879.449] (**) Option "fd" "28"
[ 879.450] (**) Option "fd" "26"
[ 879.451] (**) Option "fd" "19"
[ 879.451] (**) Option "fd" "20"
[ 879.451] (**) Option "fd" "23"
[ 879.451] (**) Option "fd" "18"
[ 879.451] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 879.523] (II) systemd-logind: got pause for 13:68
[ 879.523] (II) systemd-logind: got pause for 13:64
[ 879.523] (II) systemd-logind: got pause for 13:79
[ 879.523] (II) systemd-logind: got pause for 13:70
[ 879.523] (II) systemd-logind: got pause for 13:67
[ 879.523] (II) systemd-logind: got pause for 13:80
[ 879.523] (II) systemd-logind: got pause for 13:81
[ 879.523] (II) systemd-logind: got pause for 13:66
[ 879.523] (II) systemd-logind: got pause for 226:0
[ 1126.201] (II) systemd-logind: got resume for 13:68
[ 1126.221] (II) systemd-logind: got resume for 13:64
[ 1126.241] (II) systemd-logind: got resume for 13:79
[ 1126.257] (II) systemd-logind: got resume for 13:70
[ 1126.281] (II) systemd-logind: got resume for 13:67
[ 1126.301] (II) systemd-logind: got resume for 13:80
[ 1126.321] (II) systemd-logind: got resume for 13:81
[ 1126.338] (II) systemd-logind: got resume for 13:66
[ 1126.338] (II) systemd-logind: got resume for 226:0
[ 1126.338] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1126.400] (II) modeset(0): EDID vendor "MEI", prod id 38562
[ 1126.400] (II) modeset(0): EDID quirk: Use maximum size instead of detailed timing sizes.
[ 1126.400] (II) modeset(0): Using hsync ranges from config file
[ 1126.400] (II) modeset(0): Using vrefresh ranges from config file
[ 1126.400] (II) modeset(0): Printing DDC gathered Modelines:
[ 1126.400] (II) modeset(0): Modeline "2560x1440"x0.0 257.54 2560 2648 2680 2800 1440 1468 1473 1533 +hsync +vsync (92.0 kHz eP)
[ 1126.400] (II) modeset(0): Modeline "2560x1440"x0.0 257.51 2560 2648 2680 2800 1440 1468 1473 1916 +hsync +vsync (92.0 kHz e)
[ 1126.683] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 1126.683] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 1126.684] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 1126.684] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 1126.685] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 1126.685] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 1126.686] (II) input device 'Integrated Camera', /dev/input/event17 is tagged by udev as: Keyboard
[ 1126.686] (II) input device 'Integrated Camera', /dev/input/event17 is a keyboard
[ 1126.687] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 1126.687] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 1126.688] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is tagged by udev as: Touchpad
[ 1126.688] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event15 is a touchpad
[ 1126.689] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is tagged by udev as: Mouse Pointingstick
[ 1126.689] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event16 is a pointer caps
[ 1126.690] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 1126.690] (II) input device 'ThinkPad Extra Buttons', /dev/input/event4 is a keyboard
[ 1245.448] (**) Option "fd" "22"
[ 1245.448] (**) Option "fd" "21"
[ 1245.448] (**) Option "fd" "28"
[ 1245.449] (**) Option "fd" "26"
[ 1245.449] (**) Option "fd" "19"
[ 1245.449] (**) Option "fd" "20"
[ 1245.449] (**) Option "fd" "23"
[ 1245.450] (**) Option "fd" "18"
[ 1245.450] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1245.532] (II) systemd-logind: got pause for 13:68
[ 1245.532] (II) systemd-logind: got pause for 13:64
[ 1245.532] (II) systemd-logind: got pause for 13:79
[ 1245.532] (II) systemd-logind: got pause for 13:70
[ 1245.532] (II) systemd-logind: got pause for 13:67
[ 1245.532] (II) systemd-logind: got pause for 13:80
[ 1245.532] (II) systemd-logind: got pause for 13:81
[ 1245.532] (II) systemd-logind: got pause for 13:66
[ 1245.532] (II) systemd-logind: got pause for 226:0
[ 1337.525] (II) UnloadModule: "libinput"
[ 1337.525] (II) systemd-logind: releasing fd for 13:68
[ 1337.643] (II) UnloadModule: "libinput"
[ 1337.643] (II) systemd-logind: releasing fd for 13:80
[ 1338.504] (II) UnloadModule: "libinput"
[ 1338.504] (II) systemd-logind: releasing fd for 13:79
[ 1338.564] (II) UnloadModule: "libinput"
[ 1338.564] (II) systemd-logind: releasing fd for 13:64
[ 1338.621] (II) UnloadModule: "libinput"
[ 1338.621] (II) systemd-logind: releasing fd for 13:81
[ 1338.691] (II) UnloadModule: "libinput"
[ 1338.691] (II) systemd-logind: releasing fd for 13:66
[ 1338.731] (II) UnloadModule: "libinput"
[ 1338.731] (II) systemd-logind: releasing fd for 13:70
[ 1338.771] (II) UnloadModule: "libinput"
[ 1338.771] (II) systemd-logind: releasing fd for 13:67
[ 1338.814] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 1338.814] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 1338.814] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 1338.817] (II) Server terminated successfully (0). Closing log file.
Offline
Have you tried setting underscan with xrandr in the form showed in the link I posted? Setting h/vborder for it?
If yes but still failed, you can try to install xf86-video-intel and see if it helps. Take your own risk though since it is sort of recommended that you should use the builtin vendor-neutral xorg driver (a.k.a. modesetting DDX) instead of a vendor-specific one, especially when your gfx vendor is intel, so there can be side effects. Nevertheless since the modesetting DDX is relatively new, it may not support as many xrandr feature or so as the vendor-specific ones.
P.S. restart X after the installation for the newly-installed driver to take its place
Last edited by tom.ty89 (2017-04-13 15:02:51)
Offline
Maybe I will try xf86-video-intel but regarding the link you posted, isn't it suggesting to do
xrandr --output HDMI-0 --set underscan on --set "underscan vborder" 25 --set "underscan hborder" 40
or is it something different that you mean? if so, I was planning to do it in two steps, first underscan on and then v/h borders, but already the first step failed as I posted; I will also try the two steps together but I suspect it will fail again.
Offline
This whole behaviour is because that's the raw resolution of the TV's panel, right? It is a 1360x768 resolution panel, and a 1080p picture is transformed by the TV and has blurry pixels? If that's how it is, you could instead do that transformation on the GPU instead of the TV. You would have 1080p on your desktop and the TV would see it as 1360x768. You do this:
xrandr --output HDMI-2 --mode 1360x768 --scale-from 1920x1080
You can do it in separate steps as well:
xrandr --output HDMI-2 --mode 1360x768
xrandr --output HDMI-2 --scale-from 1920x1080
It won't forget the scaling transformation when you change modes, so you need to mention "--scale 1x1" while you switch modes around to compare:
xrandr --output HDMI-2 --mode 1360x768 --scale-from 1920x1080
xrandr --output HDMI-2 --mode 1920x1080 --scale 1x1
I don't know how to turn this into an X config.
Last edited by Ropid (2017-04-13 15:24:44)
Offline
Thanks for the suggestion, I will try it as well. I don't know how to check that the tv is is 1360x768 though, and more than blurry pixels it is borders cut off, but you may have a point: the scale-from basically will trick it into thinking it is 768 even though it actually is 1080, right?
Offline
The way I understood it, the GPU's framebuffer for the monitor will be 1920x1080. The GPU then transforms this picture into 1360x768 when sending it to the TV. For your programs running on the computer it is 1920x1080, and for the TV it is 1360x768.
Offline
Just to understand, will it improve quality of say watching a video with this trick on the tv, as opposed to just using 768? I ask because I think the TV is capable of displaying 1080.
Offline
Maybe I will try xf86-video-intel but regarding the link you posted, isn't it suggesting to do
xrandr --output HDMI-0 --set underscan on --set "underscan vborder" 25 --set "underscan hborder" 40
or is it something different that you mean? if so, I was planning to do it in two steps, first underscan on and then v/h borders, but already the first step failed as I posted; I will also try the two steps together but I suspect it will fail again.
Well I am just unsure whether you can do it in a two step way (e.g . what if it does not have fallback h/vborder values).
Just to understand, will it improve quality of say watching a video with this trick on the tv, as opposed to just using 768? I ask because I think the TV is capable of displaying 1080.
Not really. The only point to use scale-from is that, you want everything in your UI to look smaller. This is the same case for --mode 1920x1080 if your TV panel is 1360x768. It's just scale-from might do a slighty better job at the downsacling than your TV.
The only chance that you can get better video quality is to use --mode 1920x1080, that said, only when your TV panel is 1920x1080. However, it is more likely the panel is 1360x768, since it is the preferred resolution in the EDID _of the HDMI port_. The 720/1080 resolutions exist probably just for CEA compatibility (i.e. to work with things like Bluray Players). In that case you get best video quality with --mode 1360x768. Video player programs will pretty much always do a much better job in downscaling the videos to the panel resolution than the TV itself.
P.S. Truth is you almost never get a resolution like 1360x768 in the EDID of an HDMI port if it is not the panel resolution, since it's neither proper CEA or VESA resolution, but more like a compromised one in between (1024x768 is VESA, and only CEA does 16:9, but it has only HD/FHD/4K UHD, i.e 720/1080/2160).
Last edited by tom.ty89 (2017-04-13 17:01:21)
Offline
The command in one step only does produce a similar error. Given the model and producer (Proscan, plded3273a), is there a simple way to tell whether the panel is as you say? in such case, I guess it is pointless to try to force a 1080 anyway for my purposes, but should it still be called HDTV, if it just takes HD signal and degrades it to fit its panel? is it common practice? anyway, thanks for your suggestions.
Offline
Given the model and producer (Proscan, plded3273a), is there a simple way to tell whether the panel is as you say?
A quick search gives me sources like amazon and cnet which lists its resolution to be 1366x768.
but should it still be called HDTV, if it just takes HD signal and degrades it to fit its panel?
Pretty much. Precisely HD does not refer to 1920x1080 but 1280x720 (while FHD does). And 1360x768 is higher in any sense than 1280x720 and it is more or less 16:9. Although it is not precisely what HD (1280x720) is, it is yet the most common case for so called HDTV or 720p TV. (I wonder how many "true 720p" panels ever existed.)
FWIW, there is nothing wrong/bad/deceitful for it to be able to accept 1080p signals, since it allows maximum compatibility, just in case your Bluray Players or so is not even capable of downscaling 1080p sources to 720p, not to mention the non-standard 1360x768. That said, it should be able to accept 720p signal as well, so there will not be an ugly upscaled-then-downscaled process when the source is 720p.
is it common practice?
Here is an interesting quote from the Wikipedia:
In 2006, 1366×768 was the most popular resolution for liquid crystal display televisions (versus XGA for Plasma TVs flat panel displays); by 2013, even this was relegated to only being used in smaller or cheaper displays (e.g. "bedroom" LCD TVs, or low-cost, large-format plasmas), cheaper laptop and mobile tablet computers, and midrange home cinema projectors, having otherwise been overtaken by higher "full HD" resolutions such as 1920×1080.
The paragragh is also followed by a section of 1360x768, which explains its relationship with 1366x768.
Last edited by tom.ty89 (2017-04-14 03:04:12)
Offline
I'd guess best quality for video, you'd get by using a 1360x768 desktop on that monitor without any transformation, meaning the default "--scale 1x1" where desktop stuff looks very large on a TV. The video player will do the transformation and nothing else will touch the pixels: the GPU does nothing to the picture because of the "--scale 1x1", and the electronics in the TV also just hands what it gets from the GPU to the panel's real pixels because the real panel is 1360x768.
For video, you probably won't be able to perceive a difference. Videos don't do sharp graphics like what's happening with PC graphics and this will hide the difference between "--mode 1360x768 --scale-from 1920x1080" and "--mode 1360x768 --scale 1x1". This should then mean you can use whatever scaling you like best for your desktop, and won't have to worry about videos.
About how to find out if the panel is really 1360x768, I'd set "xrandr --output HDMI-2 --mode 1360x768 --scale 1x1", then look very closely at things that are "pixel graphics", like look very closely at the mouse pointer graphics, or look up "pixel art" graphics on Google and inspect the pictures you'll find there. If you look very closely, it should be obvious if pixels in the pictures are the real, physical pixels of the display, or fake and blurry because physical pixels of the panel are blended into the neighbouring panel pixels. You also have your laptop panel to compare.
Last edited by Ropid (2017-04-14 04:01:23)
Offline
I see, many thanks!
Offline