Arch Linux

nomadpenguin

Member

Registered: 2014-07-24

Posts: 15

HDMI output not detected by xrandr

I have a Lenovo y40-80, and xrandr has stopped being able to detect HDMI output to my monitor. When I plug/unplug the cable, my monitor responds by turning on the screen, but it shows that there is no signal.

[clin@frost] lspci       
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 93)
05:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XTX [Radeon HD 8890M / R9 M275X/M375X]

Also, plugging and unplugging the cable while running

udevadm monitor

produces no output. This is possibly unrelated, but the last update to my Windows partition broke the Windows display driver, and I'm not able to connect to the monitor or adjust the screen brightness in Windows. Since I haven't used my monitor with Arch after updating Windows and before updating Arch,I can't rule out the possibility that it's a hardware problem, but the fact that the monitor responds to plugging/unplugging the cable suggests that it's not.

Any help would be really appreciated!

xazax

Member

Registered: 2015-09-23

Posts: 6

Re: HDMI output not detected by xrandr

I have exactly the same issue.

xrandr does not detect the monitor, no output with udevadm. It used to work though.

My LSPCI output:

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge - DMI (rev 0a)
00:01.0 PCI bridge: Intel Corporation Broadwell-U PCI Express x16 Controller (rev 0a)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 0a)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM204M [GeForce GTX 970M] (rev ff)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
04:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)
05:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Last edited by xazax (2017-06-01 12:42:16)

Lone_Wolf

Member

From: Netherlands, Europe

Registered: 2005-10-04

Posts: 11,911

Re: HDMI output not detected by xrandr

Hmm, intel + AMD and intel + nividia .

Is xf86-video-intel installed ?
If yes, remove it and test.
If no, install it and test.

Did the problem start after an upgrade ?
xazax, are you using nvidia drivers or nouveau drivers ?

---

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

(A works at time B)  && (time C > time B ) ≠  (A works at time C)