You are not logged in.
Hello, I know there are a lot of topics with the same subject, but I still can't find the answer to my problem. The output of dmesg | grep usb:
[ 1.551373] [ 1.551373] usbcore: registered new interface driver usbfs
[ 1.551381] usbcore: registered new interface driver hub
[ 1.551410] usbcore: registered new device driver usb
[ 1.888331] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.908331] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.908351] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.314962] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[ 2.453834] usbcore: registered new interface driver usbhid
[ 2.453836] usbhid: USB HID core driver
[ 2.454748] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0001/input/input2
[ 2.454837] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2.561658] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[ 7.699126] usbcore: registered new interface driver btusb
[ 7.940955] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input15
[ 7.941030] usbcore: registered new interface driver uvcvideo
[ 59.043342] usb 3-2: USB disconnect, device number 3
[ 157.762814] usb 3-2: new low-speed USB device number 5 using xhci_hcd
[ 157.899083] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0002/input/input16
[ 157.899248] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 1434.187292] usb 3-2: USB disconnect, device number 5
[ 1435.855220] usb 3-2: new high-speed USB device number 6 using xhci_hcd
[ 1436.666391] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1436.666515] scsi host6: usb-storage 3-2:1.0
[ 1436.666579] usbcore: registered new interface driver usb-storage
[ 1436.667674] usbcore: registered new interface driver uas
[ 1448.520351] usb 3-2: USB disconnect, device number 6
[ 1488.172409] usb 3-2: new low-speed USB device number 7 using xhci_hcd
[ 1488.309278] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0003/input/input17
[ 1488.309678] hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2733.380626] usb 3-2: USB disconnect, device number 7
[ 2736.767508] usb 3-2: new high-speed USB device number 8 using xhci_hcd
[ 2736.899858] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2736.900036] scsi host6: usb-storage 3-2:1.0
[ 2755.194151] usb 3-2: USB disconnect, device number 8
[ 2757.754461] usb 3-2: new high-speed USB device number 9 using xhci_hcd
[ 2757.887052] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2757.887279] scsi host6: usb-storage 3-2:1.0
[ 2780.912647] usb 3-2: USB disconnect, device number 9
[ 2781.801254] usb 3-2: new high-speed USB device number 10 using xhci_hcd
[ 2782.055636] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2782.055750] scsi host6: usb-storage 3-2:1.0
[ 2883.140827] usb 3-2: USB disconnect, device number 10
[ 2999.506835] usb 3-2: new high-speed USB device number 11 using xhci_hcd
[ 2999.641437] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 2999.641965] scsi host6: usb-storage 3-2:1.0
[ 3039.443598] usb 3-2: USB disconnect, device number 11
[ 3042.417263] usb 3-2: new high-speed USB device number 12 using xhci_hcd
[ 3042.548566] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 3042.549043] scsi host6: usb-storage 3-2:1.0
[ 3051.200343] usb 3-2: USB disconnect, device number 12
[ 3080.024260] usb 3-2: new low-speed USB device number 13 using xhci_hcd
[ 3080.160550] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0004/input/input18
[ 3080.160762] hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
which shows that my laptop recognizes 4 USB ports, right? I'm pretty sure I have only 3 USB ports(1 USB 2.0 and 2 USB 3.0).
lsusb output:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 8087:07da Intel Corp.
Bus 003 Device 007: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 002: ID 0bda:58b9 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Also fdisk -l doesn't recognize any flash drives plugged into the USB 3.0 ports.
I tried to add pci=nomsi to the /etc/default/grub file and then updated grub and then rebooted, but still no success.
Also the loss of my USB 3.0 ports happened when I moved from Windows 8.1 to Linux. (I don't use Windows at all anymore)
Sorry for any typos.
Last edited by mk0lev (2018-01-19 12:51:43)
Offline
Eg. the camera is wired via USB - despite the popularity of the slots and dongles, they are not the equivalent of "USB" ;-)
Your post lacks some error description, how exactly do you determine the loss of [your] USB 3.0 ports?
Guessing this means "i don't see a plugged in flash key", please plug in such key, wait 5 seconds and then dump
dmesg > ~/full.dmesg
and paste that file.
Offline
Yes, that's what I meant. Thank you for the reply! That's the file when USB drive plugged into one of the USB 3.0 ports:
[ 0.000000] Linux version 4.11.3-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Sun May 28 10:40:17 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0af886bf-a738-45f3-a62d-aff0fc5e9aed rw quiet resume=UUID=3d2acf88-37c8-4787-b6c7-52b120aadfcb pci=nomsi
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006e6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006e6f0000-0x000000006faeffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006faf0000-0x000000008eebefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008eebf000-0x000000008f0befff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000008f0bf000-0x000000008f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f6bf000-0x000000008f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f7bf000-0x000000008f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f7ff000-0x000000008f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x8f7fe000 ACPI 2.0=0x8f7fe014 SMBIOS=0x8f6bef98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20217/VIQY0Y1, BIOS 74CN44WW(V3.05) 09/18/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 008F800000 mask 7FFF800000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000022000] 22000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02d42000, 0x02d42fff] PGTABLE
[ 0.000000] BRK [0x02d43000, 0x02d43fff] PGTABLE
[ 0.000000] BRK [0x02d44000, 0x02d44fff] PGTABLE
[ 0.000000] BRK [0x02d45000, 0x02d45fff] PGTABLE
[ 0.000000] BRK [0x02d46000, 0x02d46fff] PGTABLE
[ 0.000000] BRK [0x02d47000, 0x02d47fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x374c9000-0x37a5bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008F7FE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000008F7FE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000008F7F7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000008F7E7000 00C690 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000008F7BA000 000040
[ 0.000000] ACPI: SLIC 0x000000008F7FD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000008F7FC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000008F7FA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000008F7F8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000008F7F6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000008F7F5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000008F7F4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008F7E6000 000838 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000008F7E4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000008F7E2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000008F7E1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008F7D9000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008F7D8000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008F7D4000 00326E (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000008F7D1000 0012FF (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000008F7D3000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x46eff7000-0x46effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006e6effff]
[ 0.000000] node 0: [mem 0x000000006faf0000-0x000000008eebefff]
[ 0.000000] node 0: [mem 0x000000008f7ff000-0x000000008f7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
[ 0.000000] On node 0 totalpages: 4180550
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 112 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9003 pages used for memmap
[ 0.000000] DMA32 zone: 576192 pages, LIFO batch:31
[ 0.000000] Normal zone: 56256 pages used for memmap
[ 0.000000] Normal zone: 3600384 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e6f0000-0x6faeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8eebf000-0x8f0befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f0bf000-0x8f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6bf000-0x8f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f7bf000-0x8f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f800000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88046ec00000 s103256 r8192 d31912 u262144
[ 0.000000] pcpu-alloc: s103256 r8192 d31912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115115
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0af886bf-a738-45f3-a62d-aff0fc5e9aed rw quiet resume=UUID=3d2acf88-37c8-4787-b6c7-52b120aadfcb pci=nomsi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16268160K/16722200K available (6483K kernel code, 1090K rwdata, 2016K rodata, 1304K init, 904K bss, 454040K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2394.627 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.80 BogoMIPS (lpj=7982090)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170119
[ 0.016901] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.020967] Security Framework initialized
[ 0.020969] Yama: becoming mindful.
[ 0.021698] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.025308] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.026518] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.026530] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.026772] CPU: Physical Processor ID: 0
[ 0.026773] CPU: Processor Core ID: 0
[ 0.026777] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.026777] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.026780] mce: CPU supports 9 MCE banks
[ 0.026789] CPU0: Thermal monitoring enabled (TM1)
[ 0.026803] process: using mwait in idle threads
[ 0.026805] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.026806] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.026916] Freeing SMP alternatives memory: 24K
[ 0.033693] ftrace: allocating 25536 entries in 100 pages
[ 0.040055] smpboot: Max logical packages: 2
[ 0.040447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074193] TSC deadline timer enabled
[ 0.074196] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.086687] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.086716] ... version: 3
[ 0.086716] ... bit width: 48
[ 0.086717] ... generic registers: 4
[ 0.086717] ... value mask: 0000ffffffffffff
[ 0.086718] ... max period: 00007fffffffffff
[ 0.086718] ... fixed-purpose events: 3
[ 0.086719] ... event mask: 000000070000000f
[ 0.106801] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113348] smp: Bringing up secondary CPUs ...
[ 0.140022] x86: Booting SMP configuration:
[ 0.140023] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.883349] smp: Brought up 1 node, 8 CPUs
[ 0.883349] smpboot: Total of 8 processors activated (38338.40 BogoMIPS)
[ 0.886789] sched_clock: Marking stable (886666579, 0)->(952892850, -66226271)
[ 0.887168] devtmpfs: initialized
[ 0.887209] x86/mm: Memory block size: 128MB
[ 0.889582] PM: Registering ACPI NVS region [mem 0x8f6bf000-0x8f7befff] (1048576 bytes)
[ 0.889641] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.889652] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.889710] pinctrl core: initialized pinctrl subsystem
[ 0.889742] RTC time: 22:51:48, date: 06/13/17
[ 0.889819] NET: Registered protocol family 16
[ 0.889968] cpuidle: using governor ladder
[ 0.890011] cpuidle: using governor menu
[ 0.890012] PCCT header not found.
[ 0.890038] Simple Boot Flag at 0x44 set to 0x1
[ 0.890052] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.890053] ACPI: bus type PCI registered
[ 0.890054] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.890118] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.890159] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.890163] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.890400] PCI: Using configuration type 1 for base access
[ 0.890446] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.891270] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.891271] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.891465] ACPI: Added _OSI(Module Device)
[ 0.891466] ACPI: Added _OSI(Processor Device)
[ 0.891467] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.891468] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.891625] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.896214] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.897121] ACPI: Dynamic OEM Table Load:
[ 0.897127] ACPI: SSDT 0xFFFF88045C3C4800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.897436] ACPI: Dynamic OEM Table Load:
[ 0.897441] ACPI: SSDT 0xFFFF88045C12A800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.897783] ACPI: Dynamic OEM Table Load:
[ 0.897787] ACPI: SSDT 0xFFFF88045C3A5E00 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.899403] ACPI : EC: EC started
[ 0.899404] ACPI : EC: interrupt blocked
[ 0.899526] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.899528] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.899529] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.899529] ACPI: Interpreter enabled
[ 0.899562] ACPI: (supports S0 S3 S4 S5)
[ 0.899562] ACPI: Using IOAPIC for interrupt routing
[ 0.899583] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.076271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.076274] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[ 1.076441] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 1.076933] PCI host bridge to bus 0000:00
[ 1.076935] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.076936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.076937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.076938] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff window]
[ 1.076939] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.076946] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 1.077089] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 1.077122] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.077262] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.077289] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 1.077320] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 1.077455] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 1.077504] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 1.077522] pci 0000:00:14.0: reg 0x10: [mem 0xd5200000-0xd520ffff 64bit]
[ 1.077581] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.077693] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.077723] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 1.077741] pci 0000:00:16.0: reg 0x10: [mem 0xd5214000-0xd521400f 64bit]
[ 1.077803] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.077935] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 1.077952] pci 0000:00:1a.0: reg 0x10: [mem 0xd5219000-0xd52193ff]
[ 1.078032] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.078148] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.078179] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 1.078195] pci 0000:00:1b.0: reg 0x10: [mem 0xd5210000-0xd5213fff 64bit]
[ 1.078260] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.078388] pci 0000:00:1c.0: [8086:8c16] type 01 class 0x060400
[ 1.078451] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.078580] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.078611] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 1.078680] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.078839] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 1.078856] pci 0000:00:1d.0: reg 0x10: [mem 0xd5218000-0xd52183ff]
[ 1.078936] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.079054] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.079084] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 1.079301] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 1.079314] pci 0000:00:1f.2: reg 0x10: [io 0x6048-0x604f]
[ 1.079321] pci 0000:00:1f.2: reg 0x14: [io 0x6054-0x6057]
[ 1.079329] pci 0000:00:1f.2: reg 0x18: [io 0x6040-0x6047]
[ 1.079336] pci 0000:00:1f.2: reg 0x1c: [io 0x6050-0x6053]
[ 1.079343] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
[ 1.079350] pci 0000:00:1f.2: reg 0x24: [mem 0xd5217000-0xd52177ff]
[ 1.079384] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.079509] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 1.079523] pci 0000:00:1f.3: reg 0x10: [mem 0xd5215000-0xd52150ff 64bit]
[ 1.079542] pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f]
[ 1.079717] pci 0000:01:00.0: [10de:0fcd] type 00 class 0x030000
[ 1.079731] pci 0000:01:00.0: reg 0x10: [mem 0xd3000000-0xd3ffffff]
[ 1.079745] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.079758] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.079768] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 1.079777] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.079887] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 1.079901] pci 0000:01:00.1: reg 0x10: [mem 0xd4000000-0xd4003fff]
[ 1.096850] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.096852] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.096853] pci 0000:00:01.0: bridge window [mem 0xd3000000-0xd4ffffff]
[ 1.096856] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.096891] pci 0000:07:00.0: [10de:0fcd] type 00 class 0x030200
[ 1.096899] pci 0000:07:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 1.096906] pci 0000:07:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.096914] pci 0000:07:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 1.096919] pci 0000:07:00.0: reg 0x24: [io 0x4000-0x407f]
[ 1.096924] pci 0000:07:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.106841] pci 0000:00:01.1: PCI bridge to [bus 07]
[ 1.106843] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
[ 1.106845] pci 0000:00:01.1: bridge window [mem 0xd2000000-0xd2ffffff]
[ 1.106847] pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.106965] pci 0000:08:00.0: [1969:10a1] type 00 class 0x020000
[ 1.107061] pci 0000:08:00.0: reg 0x10: [mem 0xd5100000-0xd513ffff 64bit]
[ 1.107090] pci 0000:08:00.0: reg 0x18: [io 0x3000-0x307f]
[ 1.107275] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.116865] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 1.116869] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.116872] pci 0000:00:1c.0: bridge window [mem 0xd5100000-0xd51fffff]
[ 1.116979] pci 0000:09:00.0: [8086:0888] type 00 class 0x028000
[ 1.117023] pci 0000:09:00.0: reg 0x10: [mem 0xd5000000-0xd5001fff 64bit]
[ 1.117230] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.126897] pci 0000:00:1c.4: PCI bridge to [bus 09]
[ 1.126902] pci 0000:00:1c.4: bridge window [mem 0xd5000000-0xd50fffff]
[ 1.197252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 1.197294] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.197334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 1.197373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.197412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.197451] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.197490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.197529] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.197671] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 1.197714] ACPI : EC: interrupt unblocked
[ 1.197719] ACPI : EC: event unblocked
[ 1.197725] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.197726] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.197798] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 1.197800] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.197801] pci 0000:01:00.0: vgaarb: bridge control possible
[ 1.197802] vgaarb: loaded
[ 1.197840] Registered efivars operations
[ 1.227025] PCI: Using ACPI for IRQ routing
[ 1.232706] PCI: pci_cache_line_size set to 64 bytes
[ 1.232826] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 1.232827] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.232828] e820: reserve RAM buffer [mem 0x6e6f0000-0x6fffffff]
[ 1.232829] e820: reserve RAM buffer [mem 0x8eebf000-0x8fffffff]
[ 1.232830] e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
[ 1.232831] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
[ 1.232906] NetLabel: Initializing
[ 1.232906] NetLabel: domain hash size = 128
[ 1.232907] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.232921] NetLabel: unlabeled traffic allowed by default
[ 1.232968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.232973] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.235001] clocksource: Switched to clocksource hpet
[ 1.242434] VFS: Disk quotas dquot_6.6.0
[ 1.242449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.242506] pnp: PnP ACPI init
[ 1.242636] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.242638] system 00:00: [io 0xffff] has been reserved
[ 1.242639] system 00:00: [io 0xffff] has been reserved
[ 1.242640] system 00:00: [io 0xffff] has been reserved
[ 1.242641] system 00:00: [io 0x0400-0x0453] has been reserved
[ 1.242642] system 00:00: [io 0x0800-0x08fe] has been reserved
[ 1.242643] system 00:00: [io 0x0900-0x09fe] has been reserved
[ 1.242644] system 00:00: [io 0x0a00-0x0afe] has been reserved
[ 1.242645] system 00:00: [io 0x0b00-0x0bfe] has been reserved
[ 1.242646] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 1.242647] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.242648] system 00:00: [io 0x0d60-0x0d63] has been reserved
[ 1.242651] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.242690] system 00:01: [io 0x0800-0x087f] has been reserved
[ 1.242692] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.242711] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.242750] system 00:03: [io 0x1854-0x1857] has been reserved
[ 1.242752] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.242783] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.242832] pnp 00:05: Plug and Play ACPI device, IDs SYN2b0d SYN2b00 SYN0002 PNP0f13 (active)
[ 1.311802] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.311803] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.311804] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.311805] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.311806] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.311808] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.311809] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.311810] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.311811] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.311812] system 00:06: [mem 0x90020000-0x90020fff] has been reserved
[ 1.311813] system 00:06: [mem 0x90010000-0x9001ffff] has been reserved
[ 1.311815] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.312239] pnp: PnP ACPI: found 7 devices
[ 1.318144] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.318148] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.318149] pci 0000:07:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.318174] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4080000-0xd40fffff pref]
[ 1.318176] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.318178] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.318180] pci 0000:00:01.0: bridge window [mem 0xd3000000-0xd4ffffff]
[ 1.318182] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.318186] pci 0000:07:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 1.318187] pci 0000:07:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 1.318188] pci 0000:00:01.1: PCI bridge to [bus 07]
[ 1.318189] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
[ 1.318191] pci 0000:00:01.1: bridge window [mem 0xd2000000-0xd2ffffff]
[ 1.318193] pci 0000:00:01.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.318196] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 1.318199] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.318203] pci 0000:00:1c.0: bridge window [mem 0xd5100000-0xd51fffff]
[ 1.318211] pci 0000:00:1c.4: PCI bridge to [bus 09]
[ 1.318215] pci 0000:00:1c.4: bridge window [mem 0xd5000000-0xd50fffff]
[ 1.318223] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.318224] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.318225] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.318226] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfeafffff window]
[ 1.318227] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 1.318228] pci_bus 0000:01: resource 1 [mem 0xd3000000-0xd4ffffff]
[ 1.318229] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.318230] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 1.318231] pci_bus 0000:07: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 1.318232] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.318233] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 1.318234] pci_bus 0000:08: resource 1 [mem 0xd5100000-0xd51fffff]
[ 1.318235] pci_bus 0000:09: resource 1 [mem 0xd5000000-0xd50fffff]
[ 1.318341] NET: Registered protocol family 2
[ 1.318481] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.318642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.318748] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.318776] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.318814] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.318876] NET: Registered protocol family 1
[ 1.351802] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.351809] pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.351844] PCI: CLS 64 bytes, default 64
[ 1.351883] Unpacking initramfs...
[ 1.435309] Freeing initrd memory: 5708K
[ 1.435312] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.435314] software IO TLB [mem 0x8aab6000-0x8eab6000] (64MB) mapped at [ffff88008aab6000-ffff88008eab5fff]
[ 1.435556] Scanning for low memory corruption every 60 seconds
[ 1.436039] Initialise system trusted keyrings
[ 1.436082] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.436964] zbud: loaded
[ 1.437539] Key type asymmetric registered
[ 1.437548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.437576] io scheduler noop registered
[ 1.437577] io scheduler deadline registered
[ 1.437596] io scheduler cfq registered (default)
[ 1.437597] io scheduler mq-deadline registered
[ 1.438119] efifb: probing for efifb
[ 1.438137] efifb: framebuffer at 0xb1000000, using 8128k, total 8128k
[ 1.438138] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.438138] efifb: scrolling: redraw
[ 1.438139] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.443786] Console: switching to colour frame buffer device 240x67
[ 1.449297] fb0: EFI VGA frame buffer device
[ 1.449303] intel_idle: MWAIT substates: 0x42120
[ 1.449304] intel_idle: v0.4.1 model 0x3C
[ 1.449551] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.449848] GHES: HEST is not enabled!
[ 1.449900] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.450278] Linux agpgart interface v0.103
[ 1.450716] rtc_cmos 00:02: RTC can wake from S4
[ 1.450818] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.450842] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.450850] intel_pstate: Intel P-state driver initializing
[ 1.451215] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.451714] NET: Registered protocol family 10
[ 1.459482] Segment Routing with IPv6
[ 1.459523] NET: Registered protocol family 17
[ 1.460795] microcode: sig=0x306c3, pf=0x10, revision=0x12
[ 1.461044] microcode: Microcode Update Driver: v2.2.
[ 1.461342] registered taskstats version 1
[ 1.461356] Loading compiled-in X.509 certificates
[ 1.461399] zswap: loaded using pool lzo/zbud
[ 1.462575] Magic number: 5:650:906
[ 1.462704] rtc_cmos 00:02: setting system clock to 2017-06-13 22:51:48 UTC (1497394308)
[ 1.462774] PM: Checking hibernation image partition UUID=3d2acf88-37c8-4787-b6c7-52b120aadfcb
[ 1.462778] PM: Hibernation image not present or could not be loaded.
[ 1.464449] Freeing unused kernel memory: 1304K
[ 1.464450] Write protecting the kernel read-only data: 10240k
[ 1.465110] Freeing unused kernel memory: 1696K
[ 1.465305] Freeing unused kernel memory: 32K
[ 1.519144] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.520239] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.520274] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.520907] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.520921] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.522801] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.522811] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.522814] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.522943] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.522951] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.546453] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 1.558693] ACPI: bus type USB registered
[ 1.558707] usbcore: registered new interface driver usbfs
[ 1.558713] usbcore: registered new interface driver hub
[ 1.558737] usbcore: registered new device driver usb
[ 1.559548] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.559597] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.559848] SCSI subsystem initialized
[ 1.560098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.560499] ehci-pci: EHCI PCI platform driver
[ 1.560639] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.560645] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.560659] ehci-pci 0000:00:1a.0: debug port 2
[ 1.561237] libata version 3.00 loaded.
[ 1.564572] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.564579] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5219000
[ 1.572447] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.575030] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.575253] hub 1-0:1.0: USB hub found
[ 1.575259] hub 1-0:1.0: 2 ports detected
[ 1.575470] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.575474] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.575483] ehci-pci 0000:00:1d.0: debug port 2
[ 1.579372] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.579380] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5218000
[ 1.591732] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.591993] hub 2-0:1.0: USB hub found
[ 1.591998] hub 2-0:1.0: 2 ports detected
[ 1.592325] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.592331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.593644] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.593656] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.593860] hub 3-0:1.0: USB hub found
[ 1.593920] hub 3-0:1.0: 14 ports detected
[ 1.597096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.597099] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.597243] hub 4-0:1.0: USB hub found
[ 1.597263] hub 4-0:1.0: 4 ports detected
[ 1.598161] ahci 0000:00:1f.2: version 3.0
[ 1.598348] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x20 impl SATA mode
[ 1.598351] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.599212] scsi host0: ahci
[ 1.599369] scsi host1: ahci
[ 1.599490] scsi host2: ahci
[ 1.599589] scsi host3: ahci
[ 1.599739] scsi host4: ahci
[ 1.599818] scsi host5: ahci
[ 1.599854] ata1: DUMMY
[ 1.599855] ata2: DUMMY
[ 1.599856] ata3: DUMMY
[ 1.599856] ata4: DUMMY
[ 1.599857] ata5: DUMMY
[ 1.599859] ata6: SATA max UDMA/133 abar m2048@0xd5217000 port 0xd5217380 irq 19
[ 1.895072] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.911731] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.913173] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.915051] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.032964] hub 1-1:1.0: USB hub found
[ 2.033129] hub 1-1:1.0: 6 ports detected
[ 2.046589] ata6.00: ATA-9: ST1000LM014-SSHD-8GB, LVD3, max UDMA/133
[ 2.046593] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.052781] hub 2-1:1.0: USB hub found
[ 2.052885] hub 2-1:1.0: 8 ports detected
[ 2.091028] ata6.00: configured for UDMA/133
[ 2.091434] scsi 5:0:0:0: Direct-Access ATA ST1000LM014-SSHD LVD3 PQ: 0 ANSI: 5
[ 2.131296] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.131301] sd 5:0:0:0: [sda] 4096-byte physical blocks
[ 2.131330] sd 5:0:0:0: [sda] Write Protect is off
[ 2.131335] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.131383] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.135260] sda: sda1 sda2 sda3 sda4
[ 2.136359] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.321634] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[ 2.442538] PM: Starting manual resume from disk
[ 2.442541] PM: Hibernation image partition 8:4 present
[ 2.442542] PM: Looking for hibernation image.
[ 2.442782] PM: Image not found (code -22)
[ 2.442784] PM: Hibernation image not present or could not be loaded.
[ 2.451638] tsc: Refined TSC clocksource calibration: 2394.454 MHz
[ 2.451648] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c0783fd, max_idle_ns: 440795301468 ns
[ 2.456967] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.458668] usbcore: registered new interface driver usbhid
[ 2.458668] usbhid: USB HID core driver
[ 2.459176] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0001/input/input2
[ 2.459222] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 2.559502] random: fast init done
[ 2.568274] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[ 2.583010] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.935698] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.939288] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.939441] systemd[1]: Detected architecture x86-64.
[ 2.939717] systemd[1]: Set hostname to <kolev>.
[ 3.289240] systemd[1]: Listening on Journal Socket.
[ 3.289580] systemd[1]: Created slice System Slice.
[ 3.290011] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.290409] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.308109] systemd[1]: Listening on Process Core Dump Socket.
[ 3.308133] systemd[1]: Reached target Login Prompts.
[ 3.308164] systemd[1]: Listening on udev Kernel Socket.
[ 3.464986] clocksource: Switched to clocksource tsc
[ 3.626437] acpi_call: loading out-of-tree module taints kernel.
[ 3.706433] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.132415] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 4.697445] vboxdrv: Found 8 processor cores
[ 4.714863] vboxdrv: TSC mode is Invariant, tentative frequency 2394453137 Hz
[ 4.714863] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 4.715726] VBoxPciLinuxInit
[ 4.747508] vboxpci: IOMMU not found (not registered)
[ 4.748133] VBoxNetAdp: Successfully started.
[ 4.748923] VBoxNetFlt: Successfully started.
[ 5.153758] random: crng init done
[ 5.175060] systemd-journald[218]: Received request to flush runtime journal from PID 1
[ 5.201328] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.201329] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.201330] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.201330] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.201330] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.398323] AVX2 version of gcm_enc/dec engaged.
[ 5.398324] AES CTR mode by8 optimization enabled
[ 5.398347] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 5.398350] ACPI: Power Button [PWRB]
[ 5.398384] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 5.398386] ACPI: Sleep Button [SLPB]
[ 5.398493] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 5.398496] ACPI: Lid Switch [LID0]
[ 5.398540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.398542] ACPI: Power Button [PWRF]
[ 5.628581] wmi: Mapper loaded
[ 5.716979] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 5.723741] acpi device:4d: registered as cooling_device8
[ 5.726331] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input7
[ 5.726355] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.726359] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.726363] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.726366] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.726369] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.734962] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170119/utaddress-247)
[ 5.734968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.734979] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170119/utaddress-247)
[ 5.734983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.734984] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170119/utaddress-247)
[ 5.734987] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170119/utaddress-247)
[ 5.734990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.734991] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170119/utaddress-247)
[ 5.734993] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20170119/utaddress-247)
[ 5.734996] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170119/utaddress-247)
[ 5.734999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.735000] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.747248] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.781074] EDAC MC: Ver: 3.0.0
[ 5.786987] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.791973] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.791975] ACPI: Thermal Zone [TZ00] (0 C)
[ 5.822959] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.823079] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 5.823088] i801_smbus 0000:00:1f.3: An interrupt is pending!
[ 5.823095] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.885821] Intel(R) Wireless WiFi driver for Linux
[ 5.885822] Copyright(c) 2003- 2015 Intel Corporation
[ 5.885945] iwlwifi 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.886014] iwlwifi 0000:09:00.0: pci_enable_msi failed - -22
[ 5.977842] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input10
[ 6.047262] MXM: GUID detected in BIOS
[ 6.047292] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[ 6.047302] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 6.047437] checking generic (b1000000 7f0000) vs hw (a0000000 10000000)
[ 6.047438] checking generic (b1000000 7f0000) vs hw (b0000000 2000000)
[ 6.047439] fb: switching to nouveaufb from EFI VGA
[ 6.047453] Console: switching to colour dummy device 80x25
[ 6.047574] nouveau 0000:01:00.0: NVIDIA GK107 (0e70d0a2)
[ 6.065515] EDAC ie31200: No ECC support
[ 6.065609] ACPI: Battery Slot [BAT1] (battery present)
[ 6.067324] ACPI: AC Adapter [ACAD] (on-line)
[ 6.101836] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [28:d2:44:86:1c:13]
[ 6.201579] iTCO_vendor_support: vendor-support=0
[ 6.202132] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.202161] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 6.202225] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.223823] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.223824] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.223825] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.223826] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.223827] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.223827] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.223828] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.223829] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.234881] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.234969] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.234996] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.247222] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 6.279261] intel_rapl: Found RAPL domain package
[ 6.279263] intel_rapl: Found RAPL domain core
[ 6.279265] intel_rapl: Found RAPL domain dram
[ 6.279270] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 6.283595] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.283596] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.283596] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.283597] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 6.285687] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6.300917] Adding 16777212k swap on /dev/sda4. Priority:-1 extents:1 across:16777212k FS
[ 6.384143] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[ 6.424566] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.428299] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[ 6.501008] alx 0000:08:00.0 enp8s0: renamed from eth0
[ 6.517949] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2133, fw id: 1468684
[ 6.531759] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0
[ 6.574328] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 6.609878] nouveau 0000:01:00.0: bios: version 80.07.a8.00.2e
[ 6.610888] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[ 6.615891] mousedev: PS/2 mouse device common for all mice
[ 6.682232] [TTM] Zone kernel: Available graphics memory: 8190638 kiB
[ 6.682233] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.682233] [TTM] Initializing pool allocator
[ 6.682237] [TTM] Initializing DMA pool allocator
[ 6.682250] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 6.682251] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 6.682253] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 6.682254] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 6.682255] nouveau 0000:01:00.0: DRM: DCB outp 00: 04000fb6 0f420010
[ 6.682256] nouveau 0000:01:00.0: DRM: DCB outp 01: 08011f82 00020010
[ 6.682257] nouveau 0000:01:00.0: DRM: DCB outp 02: 02044f00 00000000
[ 6.682258] nouveau 0000:01:00.0: DRM: DCB conn 00: 00020047
[ 6.682259] nouveau 0000:01:00.0: DRM: DCB conn 01: 01000161
[ 6.682259] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[ 6.706606] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.706607] [drm] Driver supports precise vblank timestamp query.
[ 6.706804] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 6.914031] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 7.240120] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff88045b6f2800
[ 7.240247] fbcon: nouveaufb (fb0) is primary device
[ 7.576941] Console: switching to colour frame buffer device 240x67
[ 7.595697] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 7.627934] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 7.627966] nouveau 0000:07:00.0: enabling device (0006 -> 0007)
[ 7.628093] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.628100] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.628204] nouveau 0000:07:00.0: NVIDIA GK107 (0e70d0a2)
[ 7.700933] nouveau 0000:07:00.0: bios: version 80.07.a8.00.32
[ 8.024188] nouveau 0000:07:00.0: fb: 2048 MiB GDDR5
[ 8.087804] Bluetooth: Core ver 2.22
[ 8.087817] NET: Registered protocol family 31
[ 8.087818] Bluetooth: HCI device and connection manager initialized
[ 8.087820] Bluetooth: HCI socket layer initialized
[ 8.087821] Bluetooth: L2CAP socket layer initialized
[ 8.087825] Bluetooth: SCO socket layer initialized
[ 8.095204] nouveau 0000:07:00.0: DRM: VRAM: 2048 MiB
[ 8.095205] nouveau 0000:07:00.0: DRM: GART: 1048576 MiB
[ 8.095208] nouveau 0000:07:00.0: DRM: TMDS table version 2.0
[ 8.095209] nouveau 0000:07:00.0: DRM: DCB version 4.0
[ 8.095210] nouveau 0000:07:00.0: DRM: DCB outp 01: 08011f82 00020010
[ 8.095211] nouveau 0000:07:00.0: DRM: DCB outp 02: 02044f00 00000000
[ 8.095212] nouveau 0000:07:00.0: DRM: DCB conn 01: 01000161
[ 8.095213] nouveau 0000:07:00.0: DRM: DCB conn 04: 00000400
[ 8.110885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.110886] [drm] Driver supports precise vblank timestamp query.
[ 8.110964] nouveau 0000:07:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 8.155041] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 8.198603] usbcore: registered new interface driver btusb
[ 8.208739] media: Linux media interface: v0.10
[ 8.213233] Linux video capture interface: v2.00
[ 8.293030] nouveau 0000:07:00.0: DRM: MM: using COPY for buffer copies
[ 8.293049] [drm] Initialized nouveau 1.3.1 20120801 for 0000:07:00.0 on minor 1
[ 8.355153] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:58b9)
[ 8.360304] uvcvideo 3-1:1.0: Entity type for entity Extension 5 was not initialized!
[ 8.360306] uvcvideo 3-1:1.0: Entity type for entity Extension 2 was not initialized!
[ 8.360307] uvcvideo 3-1:1.0: Entity type for entity Processing 3 was not initialized!
[ 8.360308] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.360391] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input15
[ 8.360445] usbcore: registered new interface driver uvcvideo
[ 8.360446] USB Video Class driver (1.1.1)
[ 8.954660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.954661] Bluetooth: BNEP filters: protocol multicast
[ 8.954663] Bluetooth: BNEP socket layer initialized
[ 10.111275] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 10.137082] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 10.822549] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 10.822573] alx 0000:08:00.0 enp8s0: Enabling MSI-X interrupts failed!
[ 10.822885] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 10.823777] alx 0000:08:00.0 enp8s0: NIC Up: 100 Mbps Full
[ 10.824560] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[ 10.828317] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 10.830432] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 10.838140] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 10.838226] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 11.089563] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.097300] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.097390] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 11.156265] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 11.163409] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.171164] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.171255] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 11.423922] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.431649] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 11.431739] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 11.507263] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 11.790747] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 13.050182] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 13.057910] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 13.057999] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 13.310882] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 13.318648] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 13.318737] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 13.384678] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 14.104723] wlp9s0: authenticate with 98:de:d0:ed:d9:10
[ 14.108043] wlp9s0: send auth to 98:de:d0:ed:d9:10 (try 1/3)
[ 14.110247] wlp9s0: authenticated
[ 14.114093] wlp9s0: associate with 98:de:d0:ed:d9:10 (try 1/3)
[ 14.121418] wlp9s0: RX AssocResp from 98:de:d0:ed:d9:10 (capab=0x431 status=0 aid=2)
[ 14.145998] wlp9s0: associated
[ 14.146024] IPv6: ADDRCONF(NETDEV_CHANGE): wlp9s0: link becomes ready
[ 14.191468] wlp9s0: AP 98:de:d0:ed:d9:10 changed bandwidth, new config is 2427 MHz, width 2 (2437/0 MHz)
[ 22.075549] fuse init (API version 7.26)
[ 26.804059] Bluetooth: RFCOMM TTY layer initialized
[ 26.804067] Bluetooth: RFCOMM socket layer initialized
[ 26.804072] Bluetooth: RFCOMM ver 1.11
[ 55.425366] wlp9s0: deauthenticating from 98:de:d0:ed:d9:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 55.464111] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 55.472078] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 55.472178] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 55.723204] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 55.730948] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 55.731039] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 55.789840] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 399.689129] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 399.696920] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 399.697009] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 399.948893] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 399.956613] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 399.956702] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 400.017277] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 637.952738] device-mapper: uevent: version 1.0.3
[ 637.952788] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 715.663345] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 715.671354] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 715.671457] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 715.921503] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 715.929297] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 715.929406] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 715.990682] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1031.628782] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1031.636662] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1031.636793] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1031.894971] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1031.902757] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1031.902847] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1031.960471] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1347.614073] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1347.621999] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1347.622098] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1347.877817] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1347.885719] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1347.885817] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1347.945257] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1663.584615] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1663.592541] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1663.592650] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1663.844986] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1663.852781] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1663.852873] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1663.907177] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1979.558768] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1979.566535] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1979.566624] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1979.822410] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1979.830222] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 1979.830312] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 1979.890593] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2295.538471] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2295.546198] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2295.546296] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2295.796555] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2295.804439] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2295.804531] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2295.863078] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2477.541365] traps: dde-osd[1125] trap divide error ip:415a72 sp:7ffd91b7f370 error:0 in dde-osd[400000+2c000]
[ 2611.518440] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2611.526477] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2611.526568] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2611.776372] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2611.784314] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2611.784412] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2611.855017] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2927.494133] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2927.502000] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2927.502089] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2927.758381] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2927.766419] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 2927.766518] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 2927.825028] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3243.447941] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3243.455702] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3243.455790] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3243.708096] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3243.715853] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3243.715943] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3243.777620] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3559.408961] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3559.416917] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3559.417016] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3559.668465] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3559.676418] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3559.676520] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3559.732948] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3875.384226] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3875.392203] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3875.392301] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3875.642185] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3875.649916] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 3875.650004] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 3875.708555] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4191.392272] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4191.400202] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4191.400302] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4191.651409] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4191.659173] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4191.659265] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4191.716991] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4507.384733] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4507.392488] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4507.392577] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4507.644059] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4507.651795] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4507.651883] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4507.709486] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4823.323305] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4823.331045] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4823.331144] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4823.584486] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4823.592250] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 4823.592341] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 4823.651993] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5139.317436] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5139.325177] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5139.325276] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5139.578501] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5139.586272] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5139.586362] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5139.647608] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5455.293229] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5455.300973] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5455.301062] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5455.571064] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5455.578981] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5455.579092] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5455.641673] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5771.297916] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5771.305663] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5771.305753] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5771.556654] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5771.564416] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 5771.564509] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 5771.623428] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6087.237460] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6087.245402] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6087.245514] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6087.499107] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6087.507014] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6087.507107] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6087.565676] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6370.400729] PM: Syncing filesystems ... done.
[ 6370.660271] PM: Preparing system for sleep (mem)
[ 6370.660701] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6370.662697] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 6370.663688] PM: Suspending system (mem)
[ 6370.663729] Suspending console(s) (use no_console_suspend to debug)
[ 6370.664182] sd 5:0:0:0: [sda] Synchronizing SCSI cache
[ 6370.676076] sd 5:0:0:0: [sda] Stopping disk
[ 6370.726508] nouveau 0000:07:00.0: DRM: suspending console...
[ 6370.726511] nouveau 0000:07:00.0: DRM: suspending display...
[ 6370.726571] nouveau 0000:07:00.0: DRM: evicting buffers...
[ 6370.726600] ACPI : EC: event blocked
[ 6370.726647] nouveau 0000:01:00.0: DRM: suspending console...
[ 6370.726657] nouveau 0000:01:00.0: DRM: suspending display...
[ 6370.770374] nouveau 0000:07:00.0: DRM: waiting for kernel channels to go idle...
[ 6370.770397] nouveau 0000:07:00.0: DRM: suspending fence...
[ 6370.781689] nouveau 0000:07:00.0: DRM: suspending object tree...
[ 6370.930770] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 6371.843125] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 6371.843148] nouveau 0000:01:00.0: DRM: suspending fence...
[ 6371.854631] nouveau 0000:01:00.0: DRM: suspending object tree...
[ 6375.293638] PM: suspend of devices complete after 4629.898 msecs
[ 6375.294177] PM: late suspend of devices complete after 0.536 msecs
[ 6375.294605] ACPI : EC: interrupt blocked
[ 6375.295905] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6375.296344] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 6375.296408] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6375.310281] PM: noirq suspend of devices complete after 16.101 msecs
[ 6375.310811] ACPI: Preparing to enter system sleep state S3
[ 6375.311170] ACPI : EC: EC stopped
[ 6375.311171] PM: Saving platform NVS memory
[ 6375.311189] Disabling non-boot CPUs ...
[ 6375.338945] smpboot: CPU 1 is now offline
[ 6375.378402] smpboot: CPU 2 is now offline
[ 6375.411788] smpboot: CPU 3 is now offline
[ 6375.448489] smpboot: CPU 4 is now offline
[ 6375.485062] smpboot: CPU 5 is now offline
[ 6375.521774] smpboot: CPU 6 is now offline
[ 6375.538295] smpboot: CPU 7 is now offline
[ 6375.540419] ACPI: Low-level resume complete
[ 6375.540469] ACPI : EC: EC started
[ 6375.540469] PM: Restoring platform NVS memory
[ 6375.540760] Suspended for 48631.616 seconds
[ 6375.540798] mce: [Hardware Error]: Machine check events logged
[ 6375.540816] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ae0000000040110a
[ 6375.540816] mce: [Hardware Error]: TSC 0 ADDR ffa81dc0 MISC 38a0000086
[ 6375.540819] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1497449315 SOCKET 0 APIC 0 microcode 12
[ 6375.540820] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ae0000000040110a
[ 6375.540820] mce: [Hardware Error]: TSC 0 ADDR ffa81e00 MISC 38a0000086
[ 6375.540822] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1497449315 SOCKET 0 APIC 0 microcode 12
[ 6375.540823] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ae0000000040110a
[ 6375.540823] mce: [Hardware Error]: TSC 0 ADDR ffa81e40 MISC 38a0000086
[ 6375.540825] mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1497449315 SOCKET 0 APIC 0 microcode 12
[ 6375.540831] Enabling non-boot CPUs ...
[ 6375.540860] x86: Booting SMP configuration:
[ 6375.540860] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6375.541525] cache: parent cpu1 should not be sleeping
[ 6375.541723] CPU1 is up
[ 6375.541746] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6375.542217] cache: parent cpu2 should not be sleeping
[ 6375.542393] CPU2 is up
[ 6375.542410] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6375.542965] cache: parent cpu3 should not be sleeping
[ 6375.543141] CPU3 is up
[ 6375.543157] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 6375.543733] cache: parent cpu4 should not be sleeping
[ 6375.543943] CPU4 is up
[ 6375.543958] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 6375.544525] cache: parent cpu5 should not be sleeping
[ 6375.544726] CPU5 is up
[ 6375.544742] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 6375.545329] cache: parent cpu6 should not be sleeping
[ 6375.545581] CPU6 is up
[ 6375.545596] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 6375.546174] cache: parent cpu7 should not be sleeping
[ 6375.546398] CPU7 is up
[ 6375.553348] ACPI: Waking up from system sleep state S3
[ 6375.569505] ACPI : EC: interrupt unblocked
[ 6375.575717] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 6375.575753] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6375.575797] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6375.586867] PM: noirq resume of devices complete after 17.552 msecs
[ 6375.587471] PM: early resume of devices complete after 0.581 msecs
[ 6375.587618] nouveau 0000:07:00.0: DRM: resuming object tree...
[ 6375.587630] ACPI : EC: event unblocked
[ 6375.587701] nouveau 0000:01:00.0: DRM: resuming object tree...
[ 6375.592180] sd 5:0:0:0: [sda] Starting disk
[ 6375.697222] xhci_hcd 0000:00:14.0: port 1 resume PLC timeout
[ 6375.697615] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[ 6375.697616] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[ 6375.697629] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60002106 00000200 00000000 00000000 00000000
[ 6375.707284] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 6375.901535] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6375.902461] ata6.00: configured for UDMA/133
[ 6375.925572] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[ 6376.110303] nouveau 0000:07:00.0: DRM: resuming fence...
[ 6376.110357] nouveau 0000:07:00.0: DRM: resuming display...
[ 6376.110436] nouveau 0000:07:00.0: DRM: resuming console...
[ 6376.169059] usb 3-7: reset full-speed USB device number 4 using xhci_hcd
[ 6376.173917] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[ 6376.221962] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[ 6376.234041] nouveau 0000:01:00.0: DRM: resuming fence...
[ 6376.234097] nouveau 0000:01:00.0: DRM: resuming display...
[ 6376.309065] nouveau 0000:01:00.0: DRM: resuming console...
[ 6377.512356] usb 3-2: reset low-speed USB device number 3 using xhci_hcd
[ 6377.799655] PM: resume of devices complete after 2212.272 msecs
[ 6377.799707] usb 3-7:1.0: rebind failed: -517
[ 6377.799710] usb 3-7:1.1: rebind failed: -517
[ 6377.799957] PM: Finishing wakeup.
[ 6377.799958] Restarting tasks ... done.
[ 6377.942005] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 6377.942053] alx 0000:08:00.0 enp8s0: Enabling MSI-X interrupts failed!
[ 6377.942364] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 6377.943428] alx 0000:08:00.0 enp8s0: NIC Up: 100 Mbps Full
[ 6377.943789] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[ 6377.945130] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6377.946468] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6377.954345] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6377.954452] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6378.203950] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.211678] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.211768] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6378.270215] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6378.277982] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.285690] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.285780] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6378.538500] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.546376] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6378.546466] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6378.607676] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6378.673571] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6380.861197] Process accounting resumed
[ 6381.463599] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6381.471495] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6381.471585] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6381.723976] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6381.731681] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6381.731773] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6381.791277] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6381.892247] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6382.456916] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6382.464644] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6382.464734] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6382.722048] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6382.729766] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6382.729856] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6382.787736] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6727.217688] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6727.225399] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6727.225490] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6727.482313] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6727.490061] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 6727.490151] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 6727.550998] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7043.180046] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7043.187804] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7043.187893] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7043.441038] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7043.448759] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7043.448849] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7043.507212] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7359.209542] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7359.217308] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7359.217397] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7359.469779] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7359.477551] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7359.477640] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7359.535383] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7675.145391] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7675.153119] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7675.153208] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7675.408788] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7675.416531] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7675.416621] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7675.477956] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7991.102360] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7991.110295] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7991.110394] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7991.361776] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7991.369507] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 7991.369600] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 7991.441549] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 8307.121114] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8307.129088] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8307.129188] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 8307.380845] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8307.388738] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8307.388838] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 8307.449577] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 8622.799548] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8622.807322] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8622.807411] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 8623.055948] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8623.063876] iwlwifi 0000:09:00.0: L1 Enabled - LTR Disabled
[ 8623.063976] iwlwifi 0000:09:00.0: Radio type=0x2-0x0-0x0
[ 8623.123901] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
Last edited by mk0lev (2017-06-14 15:09:45)
Offline
??
There's no indication of such action withing the last minutes (and at some point there's a resume from STR)
Apparently the only thing that happens is reg. your wifi - a lot.
Please remove the pci=nomsi parameter, reboot, run "dmesg -w" plug a usb 3.0 key and see whether that causes *some* output.
In case the problem only manifests after an S3, that would be quite a crucial information ;-)
Can you btw. boot from a usb key in the 3.0 slot?
Offline
Please remove the pci=nomsi parameter, reboot, run "dmesg -w" plug a usb 3.0 key and see whether that causes *some* output.
In case the problem only manifests after an S3, that would be quite a crucial information ;-)
When I did dmesg > ~/full.dmesg the parameter was already removed (not sure if I rebooted after I removed the parameter and then did dmesg > ~/full.dmesg). Now I rebooted and did dmesg -w and plugged in a USB 3.0 key, but still no reaction, no output has been caused. If I plug a USB key into the 2.0 port, it does reacts by stating that I've plugged in usb-storage...
Can you btw. boot from a usb key in the 3.0 slot?
No, that's what bothers me, cause that means that bios doesn't even recognizes it, right?
Last edited by mk0lev (2017-06-14 18:37:36)
Offline
Does your firmware menu have an option for enabling/disabling the USB3 ports?
Offline
The kernel commandline in the dmes says you didn't reboot ;-)
Do you have a usb related "hand off" setting in BIOS/UEFI?
Does the BIOS have a hardware listing feature?
When you plug eg. a mouse, does the led/laser light up?
Offline
Does your firmware menu have an option for enabling/disabling the USB3 ports?
Well, not that I know. How can I check that?
Offline
The kernel commandline in the dmes says you didn't reboot ;-)
Do you have a usb related "hand off" setting in BIOS/UEFI?
Does the BIOS have a hardware listing feature?
That's what anything USB related in BIOS:
When you plug eg. a mouse, does the led/laser light up?
The led on the mouse lights up, but nothing on the laptop.
Offline
Try to disable the legacy mode and hope for the best.
The slot provides power so it's probably *not* a hardware problem (broken lanes, connectors etc.)
Last chance: blacklist xhcd_hci - https://wiki.archlinux.org/index.php/Ke … acklisting
(Ensure it's not loaded, the install => /bin/false approach is the broadsword here.
Offline
I did disable the USB Legacy mode, but again no success.
(Ensure it's not loaded, the install => /bin/false approach is the broadsword here.
By saying this, you mean just type in the terminal following:
install xhcd_hci /bin/false
in /etc/modprobe.d/mylastchance.conf right?
So that the file /etc/modprobe.d/mylastchance.conf will contain
blacklist xhcd_hci install xhcd_hci /bin/false
Last edited by mk0lev (2017-06-14 19:40:40)
Offline
I think I did it right, did exactly what I said in the last comment, but still nothing happens when I plug a usb 3.0 key.
dmesg -w
won't react as well.
Last edited by mk0lev (2017-06-14 20:09:12)
Offline
Those should be two lines and actually the "blacklist xhcd_hci" part isn't required (because the "install xhcd_hci /bin/false" part implies that.
I frankly don't know what happens for the line you presented, but "lsmod | grep xhci" will tell you.
Offline
Those should be two lines and actually the "blacklist xhcd_hci" part isn't required (because the "install xhcd_hci /bin/false" part implies that.
That's what I thought.
I frankly don't know what happens for the line you presented, but "lsmod | grep xhci" will tell you.
What do you mean? The output of "lsmod | grep xhci" is:
xhci_pci 16384 0
xhci_hcd 184320 1 xhci_pci
usbcore 208896 7 uvcvideo,usbhid,ehci_hcd,xhci_pci,btusb,xhci_hcd,ehci_pci
Offline
What indicates that the module is still loaded.
You can also blacklist xhci_pci in addition (since it pulls xhci_hcd)
Offline
You can also blacklist xhci_pci in addition (since it pulls xhci_hcd)
I blacklisted it, but still nothing. I'll keep reading and trying stuff ...
Offline
UPDATE:
It was a hardware problem. It works now after changing a controller.
Last edited by mk0lev (2018-01-19 12:53:42)
Offline
Sorry to hear.
Please always remember to mark resolved threads by editing your first posts subject. Thanks.
Offline