You are not logged in.
Recently I've installed Arch Linux on my good old PC following official guide. Installed lightdm and Gnome/Deepin Desktop Environments. When I login into session through lightdm, I can only see a cursor and background/wallpaper of the desktop appears, no icons or panels appear. But XFCE runs good without any trouble.
Xorg log:
[ 11.278]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 11.278] X Protocol Version 11, Revision 0
[ 11.278] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[ 11.278] Current Operating System: Linux arch 4.11.5-1-ARCH #1 SMP PREEMPT Wed Jun 14 16:19:27 CEST 2017 x86_64
[ 11.278] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb941ff8-bd79-4049-96d2-0033c87330af rw quiet
[ 11.278] Build Date: 07 April 2017 05:42:48PM
[ 11.278]
[ 11.278] Current version of pixman: 0.34.0
[ 11.278] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.278] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.278] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 20 13:04:18 2017
[ 11.331] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.343] (==) No Layout section. Using the first Screen section.
[ 11.343] (==) No screen section available. Using defaults.
[ 11.343] (**) |-->Screen "Default Screen Section" (0)
[ 11.343] (**) | |-->Monitor "<default monitor>"
[ 11.344] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.344] (==) Automatically adding devices
[ 11.344] (==) Automatically enabling devices
[ 11.344] (==) Automatically adding GPU devices
[ 11.344] (==) Automatically binding GPU devices
[ 11.344] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.383] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.383] Entry deleted from font path.
[ 11.394] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.394] Entry deleted from font path.
[ 11.394] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.395] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.395] Entry deleted from font path.
[ 11.395] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.395] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 11.395] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.395] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.407] (II) Loader magic: 0x822d60
[ 11.407] (II) Module ABI versions:
[ 11.407] X.Org ANSI C Emulation: 0.4
[ 11.407] X.Org Video Driver: 23.0
[ 11.407] X.Org XInput driver : 24.1
[ 11.407] X.Org Server Extension : 10.0
[ 11.408] (++) using VT number 7
[ 11.408] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11.408] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.423] (--) PCI:*(0:0:2:0) 8086:2a42:8086:2a42 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000c000/8, BIOS @ 0x????????/131072
[ 11.423] (--) PCI: (0:0:2:1) 8086:2a43:8086:2a42 rev 9, Mem @ 0xfea00000/1048576
[ 11.423] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.427] (II) LoadModule: "glx"
[ 11.443] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.665] (II) Module glx: vendor="X.Org Foundation"
[ 11.665] compiled for 1.19.3, module version = 1.0.0
[ 11.665] ABI class: X.Org Server Extension, version 10.0
[ 11.665] (==) Matched intel as autoconfigured driver 0
[ 11.665] (==) Matched intel as autoconfigured driver 1
[ 11.665] (==) Matched modesetting as autoconfigured driver 2
[ 11.665] (==) Matched fbdev as autoconfigured driver 3
[ 11.665] (==) Matched vesa as autoconfigured driver 4
[ 11.665] (==) Assigned the driver to the xf86ConfigLayout
[ 11.665] (II) LoadModule: "intel"
[ 11.666] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 11.698] (II) Module intel: vendor="X.Org Foundation"
[ 11.698] compiled for 1.19.3, module version = 2.99.917
[ 11.698] Module class: X.Org Video Driver
[ 11.698] ABI class: X.Org Video Driver, version 23.0
[ 11.698] (II) LoadModule: "modesetting"
[ 11.698] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.711] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.711] compiled for 1.19.3, module version = 1.19.3
[ 11.711] Module class: X.Org Video Driver
[ 11.711] ABI class: X.Org Video Driver, version 23.0
[ 11.711] (II) LoadModule: "fbdev"
[ 11.711] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.720] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.720] compiled for 1.19.0, module version = 0.4.4
[ 11.720] Module class: X.Org Video Driver
[ 11.720] ABI class: X.Org Video Driver, version 23.0
[ 11.720] (II) LoadModule: "vesa"
[ 11.720] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.721] (II) Module vesa: vendor="X.Org Foundation"
[ 11.721] compiled for 1.19.0, module version = 2.3.4
[ 11.721] Module class: X.Org Video Driver
[ 11.721] ABI class: X.Org Video Driver, version 23.0
[ 11.721] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 11.721] (II) intel: Driver for Intel(R) HD Graphics
[ 11.721] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 11.721] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 11.721] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.722] (II) FBDEV: driver for framebuffer: fbdev
[ 11.722] (II) VESA: driver for VESA chipsets: vesa
[ 11.745] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170123
[ 11.745] (II) intel(0): SNA compiled from 2.99.917-777-g6babcf15
[ 11.748] (WW) Falling back to old probe method for modesetting
[ 11.748] (WW) Falling back to old probe method for fbdev
[ 11.748] (II) Loading sub module "fbdevhw"
[ 11.748] (II) LoadModule: "fbdevhw"
[ 11.748] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11.756] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.756] compiled for 1.19.3, module version = 0.0.2
[ 11.756] ABI class: X.Org Video Driver, version 23.0
[ 11.756] (WW) Falling back to old probe method for vesa
[ 11.761] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 11.761] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1; using a maximum of 2 threads
[ 11.761] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.761] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 11.761] (==) intel(0): RGB weight 888
[ 11.761] (==) intel(0): Default visual is TrueColor
[ 11.761] (II) intel(0): Output LVDS1 has no monitor section
[ 11.761] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 11.761] (II) intel(0): Enabled output LVDS1
[ 11.761] (II) intel(0): Output VGA1 has no monitor section
[ 11.762] (II) intel(0): Enabled output VGA1
[ 11.762] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 11.762] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 11.762] (II) intel(0): Enabled output VIRTUAL1
[ 11.762] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 0
[ 11.762] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 1
[ 11.762] (==) intel(0): TearFree disabled
[ 11.762] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.762] (==) intel(0): DPI set to (96, 96)
[ 11.762] (II) Loading sub module "dri3"
[ 11.762] (II) LoadModule: "dri3"
[ 11.762] (II) Module "dri3" already built-in
[ 11.762] (II) Loading sub module "dri2"
[ 11.762] (II) LoadModule: "dri2"
[ 11.762] (II) Module "dri2" already built-in
[ 11.762] (II) Loading sub module "present"
[ 11.762] (II) LoadModule: "present"
[ 11.762] (II) Module "present" already built-in
[ 11.762] (II) UnloadModule: "modesetting"
[ 11.762] (II) Unloading modesetting
[ 11.762] (II) UnloadModule: "fbdev"
[ 11.762] (II) Unloading fbdev
[ 11.762] (II) UnloadSubModule: "fbdevhw"
[ 11.762] (II) Unloading fbdevhw
[ 11.762] (II) UnloadModule: "vesa"
[ 11.762] (II) Unloading vesa
[ 11.762] (==) Depth 24 pixmap format is 32 bpp
[ 11.783] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[ 11.784] (==) intel(0): Backing store enabled
[ 11.784] (==) intel(0): Silken mouse enabled
[ 11.785] (II) intel(0): HW Cursor enabled
[ 11.785] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.786] (==) intel(0): DPMS enabled
[ 11.786] (==) intel(0): Display hotplug detection enabled
[ 11.786] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 11.786] (II) intel(0): [DRI2] Setup complete
[ 11.786] (II) intel(0): [DRI2] DRI driver: i965
[ 11.786] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 11.786] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 11.786] (II) intel(0): hardware support for Present enabled
[ 11.786] (--) RandR disabled
[ 11.950] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 11.950] (II) AIGLX: enabled GLX_ARB_create_context
[ 11.950] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 11.950] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 11.950] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 11.950] (II) AIGLX: enabled GLX_SGI_swap_control
[ 11.950] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 11.950] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 11.950] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 11.950] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 11.950] (II) AIGLX: Loaded and initialized i965
[ 11.950] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.968] (II) intel(0): switch to mode 1024x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 11.968] (II) intel(0): switch to mode 1280x1024@75.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 11.970] (II) intel(0): Setting screen physical size to 338 x 270
[ 12.301] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 12.301] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 12.301] (II) LoadModule: "libinput"
[ 12.302] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 12.337] (II) Module libinput: vendor="X.Org Foundation"
[ 12.337] compiled for 1.19.3, module version = 0.25.1
[ 12.337] Module class: X.Org XInput Driver
[ 12.337] ABI class: X.Org XInput driver, version 24.1
[ 12.337] (II) Using input driver 'libinput' for 'Power Button'
[ 12.337] (**) Power Button: always reports core events
[ 12.337] (**) Option "Device" "/dev/input/event4"
[ 12.337] (**) Option "_source" "server/udev"
[ 12.341] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 12.341] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 12.341] (II) event4 - (II) Power Button: (II) device removed
[ 12.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[ 12.356] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.357] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 12.357] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 12.358] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 12.358] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 12.358] (II) Using input driver 'libinput' for 'Video Bus'
[ 12.358] (**) Video Bus: always reports core events
[ 12.358] (**) Option "Device" "/dev/input/event9"
[ 12.358] (**) Option "_source" "server/udev"
[ 12.359] (II) event9 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 12.359] (II) event9 - (II) Video Bus: (II) device is a keyboard
[ 12.359] (II) event9 - (II) Video Bus: (II) device removed
[ 12.370] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event9"
[ 12.370] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.370] (II) event9 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 12.370] (II) event9 - (II) Video Bus: (II) device is a keyboard
[ 12.371] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 12.371] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 12.371] (II) Using input driver 'libinput' for 'Power Button'
[ 12.371] (**) Power Button: always reports core events
[ 12.371] (**) Option "Device" "/dev/input/event3"
[ 12.371] (**) Option "_source" "server/udev"
[ 12.371] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 12.371] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 12.372] (II) event3 - (II) Power Button: (II) device removed
[ 12.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[ 12.383] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 12.384] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 12.384] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 12.385] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 12.385] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 12.385] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 12.385] (**) Logitech USB Keyboard: always reports core events
[ 12.385] (**) Option "Device" "/dev/input/event0"
[ 12.385] (**) Option "_source" "server/udev"
[ 12.386] (II) event0 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 12.386] (II) event0 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 12.386] (II) event0 - (II) Logitech USB Keyboard: (II) device removed
[ 12.426] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:046D:C31D.0001/input/input2/event0"
[ 12.426] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 12.427] (II) event0 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 12.427] (II) event0 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 12.429] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 12.429] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 12.429] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 12.429] (**) Logitech USB Keyboard: always reports core events
[ 12.429] (**) Option "Device" "/dev/input/event1"
[ 12.429] (**) Option "_source" "server/udev"
[ 12.429] (II) event1 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 12.430] (II) event1 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 12.430] (II) event1 - (II) Logitech USB Keyboard: (II) device removed
[ 12.466] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/0003:046D:C31D.0002/input/input3/event1"
[ 12.466] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 12.467] (II) event1 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 12.467] (II) event1 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 12.469] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event2)
[ 12.469] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 12.469] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 12.469] (**) PixArt USB Optical Mouse: always reports core events
[ 12.469] (**) Option "Device" "/dev/input/event2"
[ 12.469] (**) Option "_source" "server/udev"
[ 12.523] (II) event2 - (II) PixArt USB Optical Mouse: (II) is tagged by udev as: Mouse
[ 12.523] (II) event2 - (II) PixArt USB Optical Mouse: (II) device is a pointer
[ 12.523] (II) event2 - (II) PixArt USB Optical Mouse: (II) device removed
[ 12.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:04CA:0061.0003/input/input4/event2"
[ 12.560] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 11)
[ 12.560] (**) Option "AccelerationScheme" "none"
[ 12.560] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 12.560] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 12.560] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 12.617] (II) event2 - (II) PixArt USB Optical Mouse: (II) is tagged by udev as: Mouse
[ 12.617] (II) event2 - (II) PixArt USB Optical Mouse: (II) device is a pointer
[ 12.618] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 12.618] (II) No input driver specified, ignoring this device.
[ 12.618] (II) This device may have been added with another device file.
[ 12.618] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 12.618] (II) No input driver specified, ignoring this device.
[ 12.618] (II) This device may have been added with another device file.
[ 12.619] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
[ 12.619] (II) No input driver specified, ignoring this device.
[ 12.619] (II) This device may have been added with another device file.
[ 12.620] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
[ 12.620] (II) No input driver specified, ignoring this device.
[ 12.620] (II) This device may have been added with another device file.
[ 12.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 12.620] (II) No input driver specified, ignoring this device.
[ 12.620] (II) This device may have been added with another device file.
[ 55.153] (II) intel(0): resizing framebuffer to 2944x1080
[ 55.197] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 1, position (1024, 0), rotation normal, reflection none
[ 108.012] (II) event4 - (II) Power Button: (II) device removed
[ 108.027] (II) event9 - (II) Video Bus: (II) device removed
[ 108.057] (II) event3 - (II) Power Button: (II) device removed
[ 108.077] (II) event0 - (II) Logitech USB Keyboard: (II) device removed
[ 108.116] (II) event1 - (II) Logitech USB Keyboard: (II) device removed
[ 108.156] (II) event2 - (II) PixArt USB Optical Mouse: (II) device removed
[ 108.196] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 168.388] (II) config/udev: removing device PixArt USB Optical Mouse
[ 168.390] (II) UnloadModule: "libinput"
[ 170.036] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 170.036] (II) No input driver specified, ignoring this device.
[ 170.036] (II) This device may have been added with another device file.
[ 170.138] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event2)
[ 170.138] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 170.138] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 170.138] (**) PixArt USB Optical Mouse: always reports core events
[ 170.139] (**) Option "Device" "/dev/input/event2"
[ 170.139] (**) Option "_source" "server/udev"
[ 170.193] (II) event2 - (II) PixArt USB Optical Mouse: (II) is tagged by udev as: Mouse
[ 170.193] (II) event2 - (II) PixArt USB Optical Mouse: (II) device is a pointer
[ 170.194] (II) event2 - (II) PixArt USB Optical Mouse: (II) device removed
[ 170.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:04CA:0061.0004/input/input13/event2"
[ 170.230] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 11)
[ 170.231] (**) Option "AccelerationScheme" "none"
[ 170.231] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 170.231] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 170.231] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 230.392] (II) config/udev: removing device PixArt USB Optical Mouse
[ 230.393] (II) UnloadModule: "libinput"
[ 232.064] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 232.064] (II) No input driver specified, ignoring this device.
[ 232.064] (II) This device may have been added with another device file.
[ 232.172] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event2)
[ 232.172] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 232.172] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 232.172] (**) PixArt USB Optical Mouse: always reports core events
[ 232.172] (**) Option "Device" "/dev/input/event2"
[ 232.172] (**) Option "_source" "server/udev"
[ 232.227] (II) event2 - (II) PixArt USB Optical Mouse: (II) is tagged by udev as: Mouse
[ 232.227] (II) event2 - (II) PixArt USB Optical Mouse: (II) device is a pointer
[ 232.227] (II) event2 - (II) PixArt USB Optical Mouse: (II) device removed
[ 232.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:04CA:0061.0005/input/input14/event2"
[ 232.263] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 11)
[ 232.264] (**) Option "AccelerationScheme" "none"
[ 232.264] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 232.264] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 232.264] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 292.392] (II) config/udev: removing device PixArt USB Optical Mouse
[ 292.393] (II) UnloadModule: "libinput"
[ 294.097] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 294.097] (II) No input driver specified, ignoring this device.
[ 294.097] (II) This device may have been added with another device file.
[ 294.192] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event2)
[ 294.192] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 294.192] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 294.192] (**) PixArt USB Optical Mouse: always reports core events
[ 294.192] (**) Option "Device" "/dev/input/event2"
[ 294.192] (**) Option "_source" "server/udev"
[ 294.247] (II) event2 - (II) PixArt USB Optical Mouse: (II) is tagged by udev as: Mouse
[ 294.247] (II) event2 - (II) PixArt USB Optical Mouse: (II) device is a pointer
[ 294.247] (II) event2 - (II) PixArt USB Optical Mouse: (II) device removed
[ 294.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:04CA:0061.0006/input/input15/event2"
[ 294.283] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 11)
[ 294.284] (**) Option "AccelerationScheme" "none"
[ 294.284] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 294.284] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 294.284] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
DMESG:
[ 0.000000] Linux version 4.11.5-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Wed Jun 14 16:19:27 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb941ff8-bd79-4049-96d2-0033c87330af rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7d8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7d90000-0x00000000b7d9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7d9e000-0x00000000b7ddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7de0000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./GM45+ICH9+775 Series, BIOS 080015 12/10/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xb7d90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xb7e00000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[ 0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x374f5000-0x37a71fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9AC0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000B7D90000 000040 (v01 121014 RSDT2357 20141210 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000B7D90200 000084 (v01 121014 FACP2357 20141210 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000B7D90440 006167 (v01 M4579 M4579A11 00000A11 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000B7D9E000 000040
[ 0.000000] ACPI: APIC 0x00000000B7D90390 00006C (v01 121014 APIC2357 20141210 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000B7D90400 00003C (v01 121014 OEMMCFG 20141210 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000B7D9E040 000072 (v01 121014 OEMB2357 20141210 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000B7D9A440 000038 (v01 121014 OEMHPET 20141210 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000B7D9E0C0 002024 (v01 121014 GMCHSCI 20141210 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000B7DA0C40 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7d8ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xb7d8b000-0xb7d8ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000b7d8ffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7d8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000b7d8ffff]
[ 0.000000] On node 0 totalpages: 752942
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11703 pages used for memmap
[ 0.000000] DMA32 zone: 748944 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000b8000000-0x00000000bfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8800b7800000 s103256 r8192 d31912 u524288
[ 0.000000] pcpu-alloc: s103256 r8192 d31912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 741154
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb941ff8-bd79-4049-96d2-0033c87330af rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944720K/3011768K available (6485K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 67048K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2194.892 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.69 BogoMIPS (lpj=7316306)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170119
[ 0.008608] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.008645] Security Framework initialized
[ 0.008647] Yama: becoming mindful.
[ 0.008928] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012508] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012514] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012915] CPU: Physical Processor ID: 0
[ 0.012916] CPU: Processor Core ID: 0
[ 0.012919] mce: CPU supports 6 MCE banks
[ 0.012927] CPU0: Thermal monitoring enabled (TM2)
[ 0.012930] process: using mwait in idle threads
[ 0.012936] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012938] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.013104] Freeing SMP alternatives memory: 24K
[ 0.016672] ftrace: allocating 25551 entries in 100 pages
[ 0.026809] smpboot: Max logical packages: 2
[ 0.030378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066666] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.076677] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.076687] ... version: 2
[ 0.076688] ... bit width: 40
[ 0.076689] ... generic registers: 2
[ 0.076690] ... value mask: 000000ffffffffff
[ 0.076690] ... max period: 000000007fffffff
[ 0.076691] ... fixed-purpose events: 3
[ 0.076692] ... event mask: 0000000700000003
[ 0.096824] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103336] smp: Bringing up secondary CPUs ...
[ 0.130017] x86: Booting SMP configuration:
[ 0.130018] .... node #0, CPUs: #1
[ 0.215361] smp: Brought up 1 node, 2 CPUs
[ 0.215361] smpboot: Total of 2 processors activated (8782.09 BogoMIPS)
[ 0.216748] sched_clock: Marking stable (216666645, 0)->(363263607, -146596962)
[ 0.217039] devtmpfs: initialized
[ 0.217133] x86/mm: Memory block size: 128MB
[ 0.220499] PM: Registering ACPI NVS region [mem 0xb7d9e000-0xb7ddffff] (270336 bytes)
[ 0.220566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.220573] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.220647] pinctrl core: initialized pinctrl subsystem
[ 0.220690] RTC time: 7:34:07, date: 06/20/17
[ 0.220802] NET: Registered protocol family 16
[ 0.221041] cpuidle: using governor ladder
[ 0.221067] cpuidle: using governor menu
[ 0.221070] PCCT header not found.
[ 0.221091] ACPI: bus type PCI registered
[ 0.221093] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.221165] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.221167] PCI: not using MMCONFIG
[ 0.221168] PCI: Using configuration type 1 for base access
[ 0.222138] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.222379] ACPI: Added _OSI(Module Device)
[ 0.222380] ACPI: Added _OSI(Processor Device)
[ 0.222381] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.222382] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222614] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.225533] ACPI: Dynamic OEM Table Load:
[ 0.225538] ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x11, should be 0x74 (20170119/tbprint-211)
[ 0.225544] ACPI: SSDT 0xFFFF8800B391A800 0002FB (v01 LORD LD-01 00000114 INTL 20051117)
[ 0.225716] ACPI: Dynamic OEM Table Load:
[ 0.225722] ACPI: SSDT 0xFFFF8800B3867000 0004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.226075] ACPI: Dynamic OEM Table Load:
[ 0.226079] ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x0A, should be 0x6F (20170119/tbprint-211)
[ 0.226084] ACPI: SSDT 0xFFFF8800B3918800 0002FB (v01 LORD LD-01 00000114 INTL 20051117)
[ 0.226224] ACPI: Dynamic OEM Table Load:
[ 0.226228] ACPI: SSDT 0xFFFF8800B396F300 000085 (v01 PmRef P002Cst 00003000 INTL 20051117)
[ 0.227271] ACPI: Interpreter enabled
[ 0.227290] ACPI: (supports S0 S1 S4 S5)
[ 0.227291] ACPI: Using IOAPIC for interrupt routing
[ 0.227321] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.228703] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.228707] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.229161] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.236813] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.236819] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.236827] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.237102] PCI host bridge to bus 0000:00
[ 0.237105] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.237107] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.237108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.237110] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.237112] pci_bus 0000:00: root bus resource [mem 0xb7e00000-0xdfffffff window]
[ 0.237113] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.237115] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.237125] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.237152] DMAR: Forcing write-buffer flush capability
[ 0.237152] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.237246] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.237259] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.237267] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.237273] pci 0000:00:02.0: reg 0x20: [io 0xc000-0xc007]
[ 0.237384] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.237395] pci 0000:00:02.1: reg 0x10: [mem 0xfea00000-0xfeafffff 64bit]
[ 0.237535] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.237579] pci 0000:00:1a.0: reg 0x20: [io 0xc480-0xc49f]
[ 0.237683] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.237730] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.237774] pci 0000:00:1a.1: reg 0x20: [io 0xc400-0xc41f]
[ 0.237876] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.237923] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.237967] pci 0000:00:1a.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.238070] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.238130] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.238148] pci 0000:00:1a.7: reg 0x10: [mem 0xfebfb400-0xfebfb7ff]
[ 0.238238] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.238291] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.238341] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.238358] pci 0000:00:1b.0: reg 0x10: [mem 0xfebf4000-0xfebf7fff 64bit]
[ 0.238436] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238534] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.238604] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238662] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.238710] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.238786] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.238845] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.238891] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.238935] pci 0000:00:1d.0: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.239037] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.239083] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.239127] pci 0000:00:1d.1: reg 0x20: [io 0xc880-0xc89f]
[ 0.239229] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.239274] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.239317] pci 0000:00:1d.2: reg 0x20: [io 0xc800-0xc81f]
[ 0.239422] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.239477] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.239495] pci 0000:00:1d.7: reg 0x10: [mem 0xfebfb800-0xfebfbbff]
[ 0.239585] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.239640] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.239684] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.239775] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.239820] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.240008] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.240023] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.240031] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.240039] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.240047] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.240055] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
[ 0.240063] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
[ 0.240074] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.240075] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.240077] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.240078] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.240187] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.240203] pci 0000:00:1f.3: reg 0x10: [mem 0xfebfbc00-0xfebfbcff 64bit]
[ 0.240224] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.240327] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.240341] pci 0000:00:1f.5: reg 0x10: [io 0xd880-0xd887]
[ 0.240349] pci 0000:00:1f.5: reg 0x14: [io 0xd800-0xd803]
[ 0.240357] pci 0000:00:1f.5: reg 0x18: [io 0xd480-0xd487]
[ 0.240365] pci 0000:00:1f.5: reg 0x1c: [io 0xd400-0xd403]
[ 0.240373] pci 0000:00:1f.5: reg 0x20: [io 0xd080-0xd08f]
[ 0.240381] pci 0000:00:1f.5: reg 0x24: [io 0xd000-0xd00f]
[ 0.240539] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.240610] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.240630] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.240659] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.240677] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.240773] pci 0000:03:00.0: supports D1 D2
[ 0.240775] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.251461] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.251465] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.251472] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.251552] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.251561] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.251563] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.251565] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.251566] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.251568] pci 0000:00:1e.0: bridge window [mem 0xb7e00000-0xdfffffff window] (subtractive decode)
[ 0.251570] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.252384] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.252445] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.252502] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.252561] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.252621] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.252681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.252741] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.252800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.252859] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.252981] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.252983] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.252990] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.252991] vgaarb: loaded
[ 0.253093] PCI: Using ACPI for IRQ routing
[ 0.259641] PCI: pci_cache_line_size set to 64 bytes
[ 0.259692] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.259694] e820: reserve RAM buffer [mem 0xb7d90000-0xb7ffffff]
[ 0.259817] NetLabel: Initializing
[ 0.259819] NetLabel: domain hash size = 128
[ 0.259819] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.259840] NetLabel: unlabeled traffic allowed by default
[ 0.259896] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.259901] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259905] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.261951] clocksource: Switched to clocksource hpet
[ 0.276814] VFS: Disk quotas dquot_6.6.0
[ 0.276845] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.276979] pnp: PnP ACPI init
[ 0.277115] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.277120] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277206] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.277661] pnp 00:02: [dma 0 disabled]
[ 0.277750] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.278349] pnp 00:03: [dma 0 disabled]
[ 0.278570] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.278793] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.278795] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.278797] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.278799] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.278802] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278965] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.278967] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.278969] system 00:05: [io 0x0500-0x053f] has been reserved
[ 0.278971] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278973] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278975] system 00:05: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.278978] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279122] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.279125] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.279128] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279200] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.279203] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279402] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.279404] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.279406] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.279408] system 00:08: [mem 0x00100000-0xb7dfffff] could not be reserved
[ 0.279410] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.279413] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.279546] pnp: PnP ACPI: found 9 devices
[ 0.286353] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.286370] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.286374] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.286377] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.286385] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
[ 0.286403] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb7e00000-0xb7ffffff]
[ 0.286409] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286411] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0200000-0xc05fffff]
[ 0.286414] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.286418] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.286420] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.286425] pci 0000:00:1c.0: bridge window [mem 0xb7e00000-0xb7ffffff]
[ 0.286429] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286434] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.286437] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.286441] pci 0000:00:1c.5: bridge window [mem 0xc0200000-0xc05fffff]
[ 0.286445] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.286451] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.286462] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.286464] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.286466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.286467] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.286469] pci_bus 0000:00: resource 8 [mem 0xb7e00000-0xdfffffff window]
[ 0.286471] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.286472] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.286474] pci_bus 0000:02: resource 1 [mem 0xb7e00000-0xb7ffffff]
[ 0.286476] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286477] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.286479] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc05fffff]
[ 0.286480] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.286482] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.286484] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.286486] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.286487] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.286489] pci_bus 0000:01: resource 8 [mem 0xb7e00000-0xdfffffff window]
[ 0.286491] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.286573] NET: Registered protocol family 2
[ 0.286804] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.286957] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.287199] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.287271] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287304] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287384] NET: Registered protocol family 1
[ 0.287405] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.288531] PCI: CLS 32 bytes, default 64
[ 0.288594] Unpacking initramfs...
[ 0.397678] Freeing initrd memory: 5620K
[ 0.397911] Scanning for low memory corruption every 60 seconds
[ 0.398689] Initialise system trusted keyrings
[ 0.398782] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.400586] zbud: loaded
[ 0.401304] Key type asymmetric registered
[ 0.401321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.401353] io scheduler noop registered
[ 0.401354] io scheduler deadline registered
[ 0.401391] io scheduler cfq registered (default)
[ 0.401392] io scheduler mq-deadline registered
[ 0.401497] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.401929] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.401930] vesafb: scrolling: redraw
[ 0.401931] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.401966] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
[ 0.441908] Console: switching to colour frame buffer device 160x64
[ 0.481686] fb0: VESA VGA frame buffer device
[ 0.481701] intel_idle: does not run on family 6 model 23
[ 0.481796] Monitor-Mwait will be used to enter C-1 state
[ 0.481801] Monitor-Mwait will be used to enter C-2 state
[ 0.481804] Monitor-Mwait will be used to enter C-3 state
[ 0.481808] sched_clock: Marking unstable (476669520, 1935899)<-(625202381, -146596962)
[ 0.481810] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.482158] GHES: HEST is not enabled!
[ 0.482243] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.502768] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.503190] Linux agpgart interface v0.103
[ 0.503396] rtc_cmos 00:01: RTC can wake from S4
[ 0.503518] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.503544] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.503577] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.503848] NET: Registered protocol family 10
[ 0.507551] Segment Routing with IPv6
[ 0.507575] NET: Registered protocol family 17
[ 0.507774] microcode: sig=0x1067a, pf=0x1, revision=0xa07
[ 0.507818] microcode: Microcode Update Driver: v2.2.
[ 0.507963] registered taskstats version 1
[ 0.507974] Loading compiled-in X.509 certificates
[ 0.507992] zswap: loaded using pool lzo/zbud
[ 0.508344] Magic number: 5:273:572
[ 0.508448] rtc_cmos 00:01: setting system clock to 2017-06-20 07:34:07 UTC (1497944047)
[ 0.508479] PM: Hibernation image not present or could not be loaded.
[ 0.510172] Freeing unused kernel memory: 1304K
[ 0.510174] Write protecting the kernel read-only data: 10240k
[ 0.511096] Freeing unused kernel memory: 1692K
[ 0.511216] Freeing unused kernel memory: 28K
[ 0.520809] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 0.523029] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.523089] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.524758] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.524785] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.529810] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.529832] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.529840] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.530136] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.530158] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.568274] ACPI: bus type USB registered
[ 0.568316] usbcore: registered new interface driver usbfs
[ 0.568330] usbcore: registered new interface driver hub
[ 0.568373] usbcore: registered new device driver usb
[ 0.569548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.569756] ehci-pci: EHCI PCI platform driver
[ 0.569970] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.569982] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.569997] ehci-pci 0000:00:1a.7: debug port 1
[ 0.573924] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.573948] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfebfb400
[ 0.579021] i8042: PNP: No PS/2 controller found.
[ 0.579023] i8042: Probing ports directly.
[ 0.579486] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.579534] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.583911] SCSI subsystem initialized
[ 0.585356] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.585591] hub 1-0:1.0: USB hub found
[ 0.585600] hub 1-0:1.0: 6 ports detected
[ 0.585959] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.585965] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.585978] ehci-pci 0000:00:1d.7: debug port 1
[ 0.588650] libata version 3.00 loaded.
[ 0.590262] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.590282] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebfb800
[ 0.601955] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.602148] hub 2-0:1.0: USB hub found
[ 0.602156] hub 2-0:1.0: 6 ports detected
[ 0.602366] ata_piix 0000:00:1f.2: version 2.13
[ 0.602495] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.602910] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.604143] scsi host0: ata_piix
[ 0.604267] scsi host1: ata_piix
[ 0.604324] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 0.604326] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 0.604451] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.611980] scsi host2: ata_piix
[ 0.612848] scsi host3: ata_piix
[ 0.612909] ata3: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd080 irq 19
[ 0.612913] ata4: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xd088 irq 19
[ 0.613053] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.613061] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.613068] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.613094] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
[ 0.613495] hub 3-0:1.0: USB hub found
[ 0.613503] hub 3-0:1.0: 2 ports detected
[ 0.613709] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.613714] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.613720] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.613741] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
[ 0.613918] hub 4-0:1.0: USB hub found
[ 0.613926] hub 4-0:1.0: 2 ports detected
[ 0.614102] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.614107] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.614113] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.614130] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c080
[ 0.614303] hub 5-0:1.0: USB hub found
[ 0.614311] hub 5-0:1.0: 2 ports detected
[ 0.614491] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.614499] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.614505] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.614523] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[ 0.614697] hub 6-0:1.0: USB hub found
[ 0.614704] hub 6-0:1.0: 2 ports detected
[ 0.614886] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.614891] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.614897] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.614914] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[ 0.615094] hub 7-0:1.0: USB hub found
[ 0.615102] hub 7-0:1.0: 2 ports detected
[ 0.615361] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.615367] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.615375] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.615393] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 0.615559] hub 8-0:1.0: USB hub found
[ 0.615566] hub 8-0:1.0: 2 ports detected
[ 0.905293] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.936017] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.946770] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.045574] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.045771] scsi host4: usb-storage 1-1:1.0
[ 1.045855] usbcore: registered new interface driver usb-storage
[ 1.046213] usbcore: registered new interface driver uas
[ 1.075339] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.075483] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.078031] ata1.00: ATA-8: ST3500413AS, JC4B, max UDMA/133
[ 1.078033] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.082781] ata1.00: configured for UDMA/133
[ 1.082991] scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC4B PQ: 0 ANSI: 5
[ 1.095303] random: fast init done
[ 1.095415] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.118751] ata2.00: configured for UDMA/100
[ 1.122941] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.122956] sd 0:0:0:0: [sda] Write Protect is off
[ 1.122958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.122984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.128033] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.162428] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.162430] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.162572] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.215902] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.216504] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.295298] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 1.415294] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3595359b, max_idle_ns: 440795207963 ns
[ 1.502126] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.544014] usbcore: registered new interface driver usbhid
[ 1.544016] usbhid: USB HID core driver
[ 1.544860] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:046D:C31D.0001/input/input2
[ 1.598721] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-2/input0
[ 1.609718] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/0003:046D:C31D.0002/input/input3
[ 1.665348] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-2/input1
[ 2.005684] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.025309] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 2.222383] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:04CA:0061.0003/input/input4
[ 2.222429] hid-generic 0003:04CA:0061.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 2.246020] scsi 4:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4
[ 2.246880] sd 4:0:0:0: [sdb] 30523392 512-byte logical blocks: (15.6 GB/14.6 GiB)
[ 2.247622] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.247625] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.248378] sd 4:0:0:0: [sdb] No Caching mode page found
[ 2.248634] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.252759] sdb: sdb1
[ 2.255253] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.736450] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.761800] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.761953] systemd[1]: Detected architecture x86-64.
[ 2.765492] systemd[1]: Set hostname to <arch>.
[ 3.242041] random: crng init done
[ 3.468147] systemd[1]: Created slice User and Session Slice.
[ 3.468230] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.468279] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.468327] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.468497] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.468521] systemd[1]: Reached target Remote File Systems.
[ 3.468542] systemd[1]: Reached target Login Prompts.
[ 3.830192] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[ 5.105701] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 6.169702] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 6.169708] ACPI: Power Button [PWRB]
[ 6.169767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.169769] ACPI: Power Button [PWRF]
[ 6.212359] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.212425] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.427998] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170119/utaddress-247)
[ 6.428006] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.428038] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.431594] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.713227] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.851115] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 6.983473] mousedev: PS/2 mouse device common for all mice
[ 7.168404] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.168423] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.169067] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc900006a5000, 00:e0:4c:04:08:e5, XID 00a00000 IRQ 26
[ 7.437471] iTCO_vendor_support: vendor-support=0
[ 7.555450] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 7.565967] ppdev: user-space parallel port driver
[ 7.586256] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.586262] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.586265] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.586267] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 7.586269] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 7.586271] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 7.586274] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 7.586277] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 7.586279] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 7.606947] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.607046] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.607131] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.770597] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.770663] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 7.770841] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.910269] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 8.374777] intel_powerclamp: No package C-state available
[ 8.399018] intel_powerclamp: No package C-state available
[ 8.529670] pci 0000:00:00.0: Intel GM45 Chipset
[ 8.529996] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.531385] pci 0000:00:00.0: detected 131072K stolen memory
[ 8.531433] [drm] Memory usable by graphics device = 2048M
[ 8.531438] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 8.531440] fb: switching to inteldrmfb from VESA VGA
[ 8.531490] Console: switching to colour dummy device 80x25
[ 8.531743] [drm] Replacing VGA console driver
[ 8.538714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.538716] [drm] Driver supports precise vblank timestamp query.
[ 8.541299] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.625268] [drm] RC6 disabled, disabling runtime PM support
[ 8.625786] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 8.626558] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.626790] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 8.628314] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 8.685484] fbcon: inteldrmfb (fb0) is primary device
[ 8.766344] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.777954] Console: switching to colour frame buffer device 160x64
[ 8.801673] Adding 2887676k swap on /dev/sda8. Priority:-1 extents:1 across:2887676k FS
[ 8.867515] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.674881] r8169 0000:03:00.0 enp3s0: link down
[ 10.674882] r8169 0000:03:00.0 enp3s0: link down
[ 10.674956] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 12.324206] r8169 0000:03:00.0 enp3s0: link up
[ 12.324223] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 14.573551] fuse init (API version 7.26)
Computer Hardware info (generated in windows):
HWiNFO64 Version 5.52-3161
DESKTOP-NHD29EN -----------------------------------------------------------
[Current Computer]
Computer Name: DESKTOP-NHD29EN
[Operating System]
Operating System: Microsoft Windows 10 Professional (x64) Build 14393.1198 (RS1)
UEFI Boot: Not Present
Central Processor(s) ------------------------------------------------------
[CPU Unit Count]
Number Of Processor Packages (Physical): 1
Number Of Processor Cores: 2
Number Of Logical Processors: 2
Intel Core 2 Duo E7500 ----------------------------------------------------
[General Information]
Processor Name: Intel Core 2 Duo E7500
Original Processor Frequency: 2933.3 MHz
Original Processor Frequency [MHz]: 2933
CPU ID: 0001067A
CPU Brand Name: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
CPU Vendor: GenuineIntel
CPU Stepping: R0
CPU Code Name: Wolfdale-M
CPU S-Spec: SLGTE
CPU Thermal Design Power (TDP): 65.0 W
CPU Max. Case Temperature (Tcase_max): 74.1 °C
CPU Type: Production Unit
CPU Platform: LGA775 (FC-LGA8)
Microcode Update Revision: A0C
Number of CPU Cores: 2
Number of Logical CPUs: 2
[Operating Points]
CPU LFM (Minimum): 1600.0 MHz = 6.00 x 266.7 MHz @ 1.1000 V
CPU HFM (Maximum): 2933.3 MHz = 11.00 x 266.7 MHz @ 1.2875 V [Locked]
CPU Current: 2194.8 MHz = 11.00 x 199.5 MHz @ 1.2875 V
CPU Bus Type: FSB (QDR)
[Cache and TLB]
L1 Cache: Instruction: 2 x 32 KBytes, Data: 2 x 32 KBytes
L2 Cache: Integrated: 3 MBytes
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 MB Pages, 4-way set associative, 32 entries
[Standard Feature Flags]
FPU on Chip Present
Enhanced Virtual-86 Mode Present
I/O Breakpoints Present
Page Size Extensions Present
Time Stamp Counter Present
Pentium-style Model Specific Registers Present
Physical Address Extension Present
Machine Check Exception Present
CMPXCHG8B Instruction Present
APIC On Chip / PGE (AMD) Present
Fast System Call Present
Memory Type Range Registers Present
Page Global Feature Present
Machine Check Architecture Present
CMOV Instruction Present
Page Attribute Table Present
36-bit Page Size Extensions Present
Processor Number Not Present
CLFLUSH Instruction Present
Debug Trace and EMON Store Present
Internal ACPI Support Present
MMX Technology Present
Fast FP Save/Restore (IA MMX-2) Present
Streaming SIMD Extensions Present
Streaming SIMD Extensions 2 Present
Self-Snoop Present
Multi-Threading Capable Present
Automatic Clock Control Present
IA-64 Processor Not Present
Signal Break on FERR Present
Virtual Machine Extensions (VMX) Present
Safer Mode Extensions (Intel TXT) Not Present
Streaming SIMD Extensions 3 Present
Supplemental Streaming SIMD Extensions 3 Present
Streaming SIMD Extensions 4.1 Present
Streaming SIMD Extensions 4.2 Not Present
AVX Support Not Present
Fused Multiply Add (FMA) Not Present
Carryless Multiplication (PCLMULQDQ)/GFMUL Not Present
CMPXCHG16B Support Present
MOVBE Instruction Not Present
POPCNT Instruction Not Present
XSAVE/XRSTOR/XSETBV/XGETBV Instructions Present
XGETBV/XSETBV OS Enabled Present
Float16 Instructions Not Present
AES Cryptography Support Not Present
Random Number Read Instruction (RDRAND) Not Present
Extended xAPIC Not Present
MONITOR/MWAIT Support Present
Thermal Monitor 2 Present
Enhanced SpeedStep Technology Present
L1 Context ID Not Present
Send Task Priority Messages Disabling Present
Processor Context ID Not Present
Direct Cache Access Not Present
TSC-deadline Timer Not Present
Performance/Debug Capability MSR Present
IA32 Debug Interface Support Not Present
64-Bit Debug Store Present
CPL Qualified Debug Store Present
[Extended Feature Flags]
64-bit Extensions Present
RDTSCP and TSC_AUX Support Not Present
1 GB large page support Not Present
No Execute Present
SYSCALL/SYSRET Support Present
Bit Manipulation Instructions Set 1 Not Present
Bit Manipulation Instructions Set 2 Not Present
Advanced Vector Extensions 2 (AVX2) Not Present
Advanced Vector Extensions 512 (AVX-512) Not Present
AVX-512 Prefetch Instructions Not Present
AVX-512 Exponential and Reciprocal Instructions Not Present
AVX-512 Conflict Detection Instructions Not Present
AVX-512 Doubleword and Quadword Instructions Not Present
AVX-512 Byte and Word Instructions Not Present
AVX-512 Vector Length Extensions Not Present
AVX-512 52-bit Integer FMA Instructions Not Present
Secure Hash Algorithm (SHA) Extensions Not Present
Software Guard Extensions (SGX) Support Not Present
Supervisor Mode Execution Protection (SMEP) Not Present
Supervisor Mode Access Prevention (SMAP) Not Present
Hardware Lock Elision (HLE) Not Present
Restricted Transactional Memory (RTM) Not Present
Memory Protection Extensions (MPX) Not Present
Read/Write FS/GS Base Instructions Not Present
Enhanced Performance String Instruction Not Present
INVPCID Instruction Not Present
RDSEED Instruction Not Present
Multi-precision Add Carry Instructions (ADX) Not Present
PCOMMIT Instructions Not Present
CLFLUSHOPT Instructions Not Present
CLWB Instructions Not Present
TSC_THREAD_OFFSET Not Present
Platform Quality of Service Monitoring (PQM) Not Present
Platform Quality of Service Enforcement (PQE) Not Present
FPU Data Pointer updated only on x87 Exceptions Not Present
Deprecated FPU CS and FPU DS Not Present
Intel Processor Trace Not Present
PREFETCHWT1 Instruction Not Present
AVX-512 Vector Bit Manipulation Instructions Not Present
User-Mode Instruction Prevention Not Present
Protection Keys for User-mode Pages Not Present
OS Enabled Protection Keys Not Present
AVX-512 VPOPCNTD/VPOPCNTQ Instructions Not Present
Read Processor ID Not Present
SGX Launch Configuration Not Present
AVX-512 Deep Learning Enhanced Word Variable Precision Not Present
AVX-512 Deep Learning Floating-point Single Precision Not Present
[Enhanced Features]
Thermal Monitor 1: Supported, Enabled
Thermal Monitor 2: Supported, Enabled
Enhanced Intel SpeedStep (GV3): Supported, Enabled
Bi-directional PROCHOT#: Enabled
Extended Auto-HALT State C1E: N/A
MLC Streamer Prefetcher Not Supported
MLC Spatial Prefetcher Not Supported
DCU Streamer Prefetcher Not Supported
DCU IP Prefetcher Not Supported
Intel Dynamic Acceleration (IDA) Technology: Not Supported
Intel Dynamic FSB Switching: Not Supported
Intel Turbo Boost Technology: Not Supported
Programmable Ratio Limits: Not Supported
Programmable TDC/TDP Limits: Not Supported
[Memory Ranges]
Maximum Physical Address Size: 36-bit (64 GBytes)
Maximum Virtual Address Size: 48-bit (256 TBytes)
[MTRRs]
Range 0-100000000 (0MB-4096MB) Type: Write Back (WB)
Range 100000000-140000000 (4096MB-5120MB) Type: Write Back (WB)
Range C0000000-100000000 (3072MB-4096MB) Type: Uncacheable (UC)
Range B7E00000-B8000000 (2942MB-2944MB) Type: Uncacheable (UC)
Range B8000000-C0000000 (2944MB-3072MB) Type: Uncacheable (UC)
Motherboard ---------------------------------------------------------------
[Computer]
Computer Brand Name: Unknown on Noname
[Motherboard]
Motherboard Model: LORD ELECTRONICS CO.,LTD.LORD GM45+ICH9+775 Series
Motherboard Chipset: Intel GL40 (Cantiga-GL) + ICH9M (Enh)
Motherboard Slots: 2xPCI Express x1
PCI Express Version Supported: v1.1
USB Version Supported: v2.0
[(G)MCH Features]
Integrated TPM: Not Supported
Manageability Engine (ME): Not Supported
iAMT: Not Supported
Camarillo: Not Supported
Audio: Supported
Intel Virtualization Technology for I/O Devices (VT-d): Not Supported
Macrovision: Not Supported
Chipset TXT: Not Supported
Internal Graphics: Supported
PCI Express Port x16: Not Supported
DDR2 Frequency Support: 400 MHz (DDR2-800)
DDR3: Supported
DDR3 Frequency Support: 400 MHz (DDR3-800)
FSB Frequency Support: 200 MHz (800 QDR)
Max. Render Core Frequency: 400 MHz
[ICH9 Features]
Mobile Features: Supported
Intel AMT Support: Supported
Quick Resume Technology: Not Supported
SATA RAID0/1/10: Supported
SATA Ports 2,3: Supported
[BIOS]
BIOS Manufacturer: American Megatrends
BIOS Date: 12/10/14
BIOS Version: 080015
UEFI BIOS: Not Capable
Super-IO/LPC Chip: ITE IT8772F
ACPI Devices --------------------------------------------------------------
Programmable interrupt controller -----------------------------------------
Device Name: Programmable interrupt controller
[Assigned Resources]
I/O Port: 0020 - 0021
IRQ: 65792
[Alternative 1]
I/O Port: 0020 - 0021
I/O Port: 00A0 - 00A1
System timer --------------------------------------------------------------
Device Name: System timer
[Assigned Resources]
I/O Port: 0040 - 0043
[Alternative 1]
I/O Port: 0040 - 0043
IRQ: 0
High precision event timer ------------------------------------------------
Device Name: High precision event timer
[Assigned Resources]
Memory Location: FED00000 - FED003FF
[Alternative 1]
Memory Location: FED00000 - FED003FF
Direct memory access controller -------------------------------------------
Device Name: Direct memory access controller
[Assigned Resources]
I/O Port: 0089 - 008B
DMA: 4
[Alternative 1]
I/O Port: 0000 - 000F
I/O Port: 0081 - 0083
I/O Port: 0087
I/O Port: 0089 - 008B
I/O Port: 008F
I/O Port: 00C0 - 00DF
DMA: 4
Printer Port --------------------------------------------------------------
Device Name: Printer Port
[Assigned Resources]
I/O Port: 0378 - 037F
[Alternative 1]
I/O Port: 0378 - 037F
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 2]
I/O Port: 0278 - 027F
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 3]
I/O Port: 03BC - 03BF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
Communications Port -------------------------------------------------------
Device Name: Communications Port
[Assigned Resources]
I/O Port: 03F8 - 03FF
[Alternative 1]
I/O Port: 03F8 - 03FF
IRQ: 4
[Alternative 2]
I/O Port: 03F8 - 03FF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 3]
I/O Port: 02F8 - 02FF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 4]
I/O Port: 03E8 - 03EF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 5]
I/O Port: 02E8 - 02EF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
[Alternative 6]
I/O Port: 03F8 - 03FF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
DMA: 0
DMA: 1
DMA: 2
DMA: 3
[Alternative 7]
I/O Port: 02F8 - 02FF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
DMA: 0
DMA: 1
DMA: 2
DMA: 3
[Alternative 8]
I/O Port: 03E8 - 03EF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
DMA: 0
DMA: 1
DMA: 2
DMA: 3
[Alternative 9]
I/O Port: 02E8 - 02EF
IRQ: 3
IRQ: 4
IRQ: 5
IRQ: 6
IRQ: 7
IRQ: 10
IRQ: 11
IRQ: 12
DMA: 0
DMA: 1
DMA: 2
DMA: 3
System speaker ------------------------------------------------------------
Device Name: System speaker
[Assigned Resources]
I/O Port: 0061
[Alternative 1]
I/O Port: 0061
Pci Bus -------------------------------------------------------------------
Device Name: Pci Bus
[Assigned Resources]
I/O Port: 0000 - FFFFFFFF
Memory Location: 000A0000 - 000BFFFF
Memory Location: B7E00000 - B7DFFFFF
[Alternative 1]
I/O Port: 0000 - 0CF7
I/O Port: 0D00 - FFFF
Memory Location: 000A0000 - 000BFFFF
Memory Location: 000D0000 - 000DFFFF
Memory Location: B7E00000 - DFFFFFFF
Memory Location: F0000000 - FED8FFFF
System CMOS/real time clock -----------------------------------------------
Device Name: System CMOS/real time clock
[Assigned Resources]
I/O Port: 0070 - 0071
[Alternative 1]
I/O Port: 0070 - 0071
IRQ: 8
System board --------------------------------------------------------------
Device Name: System board
[Assigned Resources]
Memory Location: 00000000 - 0009FFFF
[Alternative 1]
Memory Location: 00000000 - 0009FFFF
Memory Location: 000C0000 - 000CFFFF
Memory Location: 000E0000 - 000FFFFF
Memory Location: 00100000 - B7DFFFFF
Memory Location: FED90000 - FFFFFFFF
Motherboard resources -----------------------------------------------------
Device Name: Motherboard resources
[Assigned Resources]
I/O Port: 0060
I/O Port: 0000 - FEBFFFFF
[Alternative 1]
I/O Port: 0060
I/O Port: 0064
Memory Location: FEC00000 - FEC00FFF
Memory Location: FEE00000 - FEE00FFF
Motherboard resources -----------------------------------------------------
Device Name: Motherboard resources
[Assigned Resources]
I/O Port: 0010 - 001F
I/O Port: 0065 - 006F
I/O Port: 0088
I/O Port: 00E0 - 00EF
Memory Location: 00000000 - 0000008F
IRQ: 1114369
[Alternative 1]
I/O Port: 0010 - 001F
I/O Port: 0022 - 003F
I/O Port: 0044 - 005F
I/O Port: 0062 - 0063
I/O Port: 0065 - 006F
I/O Port: 0072 - 007F
I/O Port: 0080
I/O Port: 0084 - 0086
I/O Port: 0088
I/O Port: 008C - 008E
I/O Port: 0090 - 009F
I/O Port: 00A2 - 00BF
I/O Port: 00E0 - 00EF
I/O Port: 04D0 - 04D1
I/O Port: 0800 - 087F
I/O Port: 0500 - 053F
Memory Location: FED1C000 - FED1FFFF
Memory Location: FED20000 - FED3FFFF
Memory Location: FED40000 - FED8FFFF
Motherboard resources -----------------------------------------------------
Device Name: Motherboard resources
[Assigned Resources]
Memory Location: E0000000 - EFFFFFFF
[Alternative 1]
Memory Location: E0000000 - EFFFFFFF
Motherboard resources -----------------------------------------------------
Device Name: Motherboard resources
[Assigned Resources]
I/O Port: 0A00 - 0A0F
[Alternative 1]
I/O Port: 0A00 - 0A0F
I/O Port: 0A10 - 0A1F
I/O Port: 0A20 - 0A2F
I/O Port: 0A30 - 0A3F
Motherboard resources -----------------------------------------------------
Device Name: Motherboard resources
[Assigned Resources]
Memory Location: FED10000 - FED19FFF
[Alternative 1]
Memory Location: FED10000 - FED19FFF
Numeric data processor ----------------------------------------------------
Device Name: Numeric data processor
[Assigned Resources]
I/O Port: 00F0 - 00FF
[Alternative 1]
I/O Port: 00F0 - 00FF
IRQ: 13
SMBIOS DMI ----------------------------------------------------------------
BIOS ----------------------------------------------------------------------
BIOS Vendor: American Megatrends Inc.
BIOS Version: 080015
BIOS Release Date: 12/10/2014
BIOS Start Segment: F000
BIOS Size: 1024 KBytes
System BIOS Version: 8.15
ISA Support: Present
MCA Support: Not Present
EISA Support: Not Present
PCI Support: Present
PC Card (PCMCIA) Support: Not Present
Plug-and-Play Support: Present
APM Support: Not Present
Flash BIOS: Present
BIOS Shadow: Present
VL-VESA Support: Not Present
ESCD Support: Present
Boot from CD: Present
Selectable Boot: Present
BIOS ROM Socketed: Present
Boot from PC Card: Not Present
EDD Support: Present
NEC PC-98 Support: Not Present
ACPI Support: Present
USB Legacy Support: Present
AGP Support: Not Present
I2O Boot Support: Not Present
LS-120 Boot Support: Present
ATAPI ZIP Drive Boot Support: Present
IEE1394 Boot Support: Not Present
Smart Battery Support: Not Present
BIOS Boot Specification Support: Present
Function key-initiated Network Service Boot Support: Not Present
Targeted Content Distribution Support: Present
UEFI Specification Support: Not Present
System --------------------------------------------------------------------
System Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Product Serial Number: To Be Filled By O.E.M.
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Mainboard -----------------------------------------------------------------
Mainboard Manufacturer: LORD ELECTRONICS CO.,LTD.LORD
Mainboard Name: GM45+ICH9+775 Series
Mainboard Version: I1T65 V0.5
Mainboard Serial Number: To be filled by O.E.M.
Asset Tag: To Be Filled By O.E.M.
Location in chassis: To Be Filled By O.E.M.
System Enclosure ----------------------------------------------------------
Manufacturer: BIOSQA@163.com
Case Type: Desktop
Version: Any Question, Please send mail
Serial Number: To Be Filled By O.E.M.
Asset Tag Number: To Be Filled By O.E.M.
Processor -----------------------------------------------------------------
Processor Manufacturer: Intel
Processor Version: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
External Clock: 267 MHz
Maximum Clock Supported: 2933 MHz
Current Clock: 2933 MHz
CPU Socket: Populated
CPU Status: Enabled
Processor Type: Central Processor
Processor Voltage: 1.3 V
Processor Upgrade: Socket 478
Socket Designation: CPU 1
L1-Cache ------------------------------------------------------------------
Socket Designation: L1-Cache
Cache State: Enabled
Cache Type: Internal, Data
Cache Scheme: Write-Back
Supported SRAM Type:
Current SRAM Type:
Cache Speed: Unknown
Error Correction Type: Parity
Maximum Cache Size: 64 KBytes
Installed Cache Size: 64 KBytes
Cache Associativity: 8-way Set-Associative
L2-Cache ------------------------------------------------------------------
Socket Designation: L2-Cache
Cache State: Enabled
Cache Type: Internal, Unified
Cache Scheme: Write-Back
Supported SRAM Type:
Current SRAM Type:
Cache Speed: Unknown
Error Correction Type: Single-bit ECC
Maximum Cache Size: 3072 KBytes
Installed Cache Size: 3072 KBytes
Cache Associativity: Unknown
L3-Cache ------------------------------------------------------------------
Socket Designation: L3-Cache
Cache State: Disabled
Cache Type: Internal
Cache Scheme: Unknown
Supported SRAM Type:
Current SRAM Type:
Cache Speed: Unknown
Error Correction Type: Unknown
Maximum Cache Size: 0 KBytes
Installed Cache Size: 0 KBytes
Cache Associativity: Unknown
BIOS Language -------------------------------------------------------------
System Event Log ----------------------------------------------------------
Portable Battery ----------------------------------------------------------
Battery Location: Left side of System
Battery Manufacturer: Nikon Battery
Manufacture Date: 08/11/97
Serial Number: NI00123
Device Name: Nikon Ultra Plus
Device Chemistry: Nickel Cadmium (NiCd)
Design Capacity: Unknown
Design Voltage: Unknown
SBDS Verison Number: SMART Ver 0123
Max. Error in Battery Data: Unknown
SBDS Serial Number: Unknown
SBDS Manufacture Date: Unknown
SBDS Device Chemistry: Lion
System Boot Information ---------------------------------------------------
Boot Status: No error occured
Management Device ---------------------------------------------------------
Device Description: LM78-1
Device Type: National Semiconductor LM78
Device Address: I/O: 0
Temperature Probe ---------------------------------------------------------
Description: LM78A
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
Management Device Threshold Data ------------------------------------------
Management Device Component -----------------------------------------------
Cooling Device ------------------------------------------------------------
Type: Unknown
Status: Unknown
Management Device Threshold Data ------------------------------------------
Management Device Component -----------------------------------------------
Cooling Device ------------------------------------------------------------
Type: Unknown
Status: Unknown
Management Device Threshold Data ------------------------------------------
Management Device Component -----------------------------------------------
System Power Supply -------------------------------------------------------
Location: To Be Filled By O.E.M.
Device Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag Number: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision Level: To Be Filled By O.E.M.
Power Supply Status: Not Present
Power Supply Type: Unknown
Power Status: Unknown
Hot replaceable: No
Unplugged from wall: No
Memory Devices ------------------------------------------------------------
Memory Controller ---------------------------------------------------------
Error Detecting Method: None
Error Correction: None
Supported Interleave: 1-Way
Current Interleave: 1-Way
Max. Memory Module Size: 4096 MBytes
Supported Memory Speed:
Supported Memory Type: DIMM, SDRAM
Supported Memory Voltage: 3.3 V
Associated Memory Slots: 4
DIMM0 ---------------------------------------------------------------------
Socket Designation: DIMM0
Memory Type: DIMM, SDRAM
Memory Speed: Unknown
Installed size: Not installed
Enabled size: Not installed
DIMM1 ---------------------------------------------------------------------
Socket Designation: DIMM1
Memory Type: DIMM, SDRAM
Memory Speed: Unknown
Installed size: Not installed
Enabled size: Not installed
DIMM2 ---------------------------------------------------------------------
Socket Designation: DIMM2
Memory Type: DIMM, SDRAM
Memory Speed: Unknown
Installed size: 4096 MBytes
Enabled size: 4096 MBytes
DIMM3 ---------------------------------------------------------------------
Socket Designation: DIMM3
Memory Type: DIMM, SDRAM
Memory Speed: Unknown
Installed size: Not installed
Enabled size: Not installed
Physical Memory Array -----------------------------------------------------
Array Location: System board
Array Use: System memory
Error Detecting Method: None
Memory Capacity: 8 GBytes
Memory Devices: 4
32-bit Memory Error Information -------------------------------------------
Memory Array Mapped Address -----------------------------------------------
Starting Address: 00000000
Ending Address: 003FFFFF
Partition Width: 4
Memory Device -------------------------------------------------------------
Total Width: Unknown
Data Width: 64 bits
Device Size: 0 MBytes
Device Form Factor: SODIMM
Device Locator: DIMM0
Bank Locator: BANK0
Device Type: Unknown
Device Type Detail:
Manufacturer: Manufacturer00
Serial Number: SerNum00
Part Number: ModulePartNumber00
Asset Tag: AssetTagNum0
32-bit Memory Error Information -------------------------------------------
Memory Device -------------------------------------------------------------
Total Width: Unknown
Data Width: 64 bits
Device Size: 0 MBytes
Device Form Factor: SODIMM
Device Locator: DIMM1
Bank Locator: BANK1
Device Type: Unknown
Device Type Detail:
Manufacturer: Manufacturer01
Serial Number: SerNum01
Part Number: ModulePartNumber01
Asset Tag: AssetTagNum1
32-bit Memory Error Information -------------------------------------------
Memory Device -------------------------------------------------------------
Total Width: 64 bits
Data Width: 64 bits
Device Size: 4096 MBytes
Device Form Factor: SODIMM
Device Locator: DIMM2
Bank Locator: BANK2
Device Type: DDR2 SDRAM
Device Type Detail: Synchronous
Manufacturer: Manufacturer02
Serial Number: SerNum02
Part Number: ModulePartNumber02
Asset Tag: AssetTagNum2
32-bit Memory Error Information -------------------------------------------
Memory Device -------------------------------------------------------------
Total Width: Unknown
Data Width: 64 bits
Device Size: 0 MBytes
Device Form Factor: SODIMM
Device Locator: DIMM3
Bank Locator: BANK3
Device Type: Unknown
Device Type Detail:
Manufacturer: Manufacturer03
Serial Number: SerNum03
Part Number: ModulePartNumber03
Asset Tag: AssetTagNum3
32-bit Memory Error Information -------------------------------------------
Memory --------------------------------------------------------------------
[General information]
Total Memory Size: 4 GBytes
Total Memory Size [MB]: 4096
[Current Performance Settings]
Maximum Supported Memory Clock: 400.0 MHz
Current Memory Clock: 399.1 MHz (2 : 1 ratio)
Current Timing (tCAS-tRCD-tRP-tRAS): 6-6-6-15
Memory Runs At: Single-Channel
Read to Read Delay (tRD_RD) Different Rank: 6T
Write to Write Delay (tWR_WR) Different Rank: 7T
Read to Write Delay (tRD_WR) Same Rank: 8T
Read to Write Delay (tRD_WR) Different Rank: 8T
Write to Read Delay (tWR_RD) Same Rank (tWTR): 5T
Write to Read Delay (tWR_RD) Different Rank: 6T
Read to Precharge Delay (tRTP): 5T
Write to Precharge Delay (tWTP): 16T
Write Recovery Time (tWR): 5T
RAS# to RAS# Delay (tRRD): 3T
Refresh Cycle Time (tRFC): 78T
Four Activate Window (tFAW): 15T
Row: 2 - 4 GB PC3-10600 DDR3 SDRAM Kingston 99P5471-004.A01LF -------------
[General Module Information]
Module Number: 2
Module Size: 4 GBytes
Memory Type: DDR3 SDRAM
Module Type: Unbuffered DIMM (UDIMM)
Memory Speed: 666.7 MHz (DDR3-1333 / PC3-10600)
Module Manufacturer: Kingston
Module Part Number: 99P5471-004.A01LF
Module Revision: 0
Module Serial Number: 120464263
Module Manufacturing Date: Year: 2012, Week: 51
Module Manufacturing Location: 5
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 15
Column Address Bits: 10
Number Of Banks: 8
Module Density: 2048 Mb
Number Of Ranks: 2
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.500 ns
CAS# Latencies Supported: 6, 7, 8, 9
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 36.000 ns
Supported Module Timing at 666.7 MHz: 9-9-9-24
Supported Module Timing at 600.0 MHz: 8-8-8-22
Supported Module Timing at 533.3 MHz: 7-7-7-20
Supported Module Timing at 466.7 MHz: 7-7-7-17
Supported Module Timing at 400.0 MHz: 6-6-6-15
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 6.000 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.125 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
Partial Array Self Refresh (PASR): Supported
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Not Supported
Extended Temperature 1X Refresh Rate: Not Supported
Extended Temperature Range: Supported
Module Temperature Sensor: Not Supported
Pseudo Target Row Refresh (pTRR): Not Supported
Module Nominal Height: 18 - 19 mm
Module Maximum Thickness (Front): 1 - 2 mm
Module Maximum Thickness (Back): 1 - 2 mm
Bus -----------------------------------------------------------------------
PCI Bus #0 ----------------------------------------------------------------
Intel PM/GM/GS45/GM47/GL40 Chipset - Memory Controller Hub [CR A1] --------
[General Information]
Device Name: Intel PM/GM/GS45/GM47/GL40 Chipset - Memory Controller Hub [CR A1]
Original Device Name: Intel PM/GM/GS45/GM47/GL40 Chipset - Memory Controller Hub [CR A1]
Device Class: Host-to-PCI Bridge
Revision ID: 9 [CR A1]
PCI Address (Bus:Device:Function) Number: 0:0:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2A40&SUBSYS_2A408086&REV_09
[System Resources]
Interrupt Line: N/A
Interrupt Pin: N/A
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Mobile Intel(R) 4 Series Chipset Processor to DRAM Controller - 2A40
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2A40&SUBSYS_2A408086&REV_09\3&11583659&0&00
Intel GM45/47 Chipset - Integrated Graphics 0 [CR A1] ---------------------
[General Information]
Device Name: Intel GM45/47 Chipset - Integrated Graphics 0 [CR A1]
Original Device Name: Intel GM45/47 Chipset - Integrated Graphics 0 [CR A1]
Device Class: VGA Compatible Adapter
Revision ID: 9 [CR A1]
PCI Address (Bus:Device:Function) Number: 0:2:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2A42&SUBSYS_2A428086&REV_09
[System Resources]
Interrupt Line: N/A
Interrupt Pin: INTA#
Memory Base Address 0 FE400000
Memory Base Address 2 D0000000
I/O Base Address 4 C000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: Intel Corporation
Driver Description: Mobile Intel(R) 4 Series Express Chipset Family
Driver Provider: Intel Corporation
Driver Version: 8.15.10.2413
Driver Date: 03-Jun-2011
DeviceInstanceId PCI\VEN_8086&DEV_2A42&SUBSYS_2A428086&REV_09\3&11583659&0&10
Intel GM45/47 Chipset - Integrated Graphics 1 [CR A1] ---------------------
[General Information]
Device Name: Intel GM45/47 Chipset - Integrated Graphics 1 [CR A1]
Original Device Name: Intel GM45/47 Chipset - Integrated Graphics 1 [CR A1]
Device Class: Unknown Video Adapter
Revision ID: 9 [CR A1]
PCI Address (Bus:Device:Function) Number: 0:2:1
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2A43&SUBSYS_2A428086&REV_09
[System Resources]
Interrupt Line: N/A
Interrupt Pin: N/A
Memory Base Address 0 FEA00000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: Intel Corporation
Driver Description: Mobile Intel(R) 4 Series Express Chipset Family
Driver Provider: Intel Corporation
Driver Version: 8.15.10.2413
Driver Date: 03-Jun-2011
DeviceInstanceId PCI\VEN_8086&DEV_2A43&SUBSYS_2A428086&REV_09\3&11583659&0&11
Intel 82801IB ICH9 - USB Universal Host Controller #4 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #4 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #4 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:26:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2937&SUBSYS_29378086&REV_03
[System Resources]
Interrupt Line: IRQ16
Interrupt Pin: INTA#
I/O Base Address 4 C480
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2937
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2937&SUBSYS_29378086&REV_03\3&11583659&0&D0
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : USB Composite Device --------------------------------------------
[Device Information]
Device Manufacturer: Logitech
Product Name: USB Keyboard
Serial Number: N/A
USB Version Supported: 1.10
USB Device Speed: USB 1.1 Low-speed
Driver Description: USB Composite Device
Hardware ID: USB\VID_046D&PID_C31D
[Driver Information]
Driver Manufacturer: (Standard USB Host Controller)
Driver Description: USB Composite Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.0
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_046D&PID_C31D\5&14FAFB3D&0&2
Intel 82801IB ICH9 - USB Universal Host Controller #5 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #5 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #5 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:26:1
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2938&SUBSYS_29388086&REV_03
[System Resources]
Interrupt Line: IRQ21
Interrupt Pin: INTB#
I/O Base Address 4 C400
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2938
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2938&SUBSYS_29388086&REV_03\3&11583659&0&D1
USB Root Hub --------------------------------------------------------------
[Port1] : USB Input Device ------------------------------------------------
[Device Information]
Device Manufacturer: PixArt
Product Name: USB Optical Mouse
Serial Number: N/A
USB Version Supported: 2.00
USB Device Speed: USB 1.1 Low-speed
Driver Description: USB Input Device
Hardware ID: USB\VID_04CA&PID_0061
[Driver Information]
Driver Manufacturer: (Standard system devices)
Driver Description: USB Input Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.351
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_04CA&PID_0061\5&1697A68A&0&1
[Port2] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - USB Universal Host Controller #6 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #6 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #6 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:26:2
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2939&SUBSYS_29398086&REV_03
[System Resources]
Interrupt Line: IRQ19
Interrupt Pin: INTD#
I/O Base Address 4 C080
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2939
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2939&SUBSYS_29398086&REV_03\3&11583659&0&D2
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - Enhanced USB2 Controller #2 [A3] ---------------------
[General Information]
Device Name: Intel 82801IB ICH9 - Enhanced USB2 Controller #2 [A3]
Original Device Name: Intel 82801IB ICH9 - Enhanced USB2 Controller #2 [A3]
Device Class: USB EHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:26:7
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_293C&SUBSYS_293C8086&REV_03
[System Resources]
Interrupt Line: IRQ18
Interrupt Pin: INTC#
Memory Base Address 0 FEBFB400
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 2.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_293C&SUBSYS_293C8086&REV_03\3&11583659&0&D7
USB Root Hub --------------------------------------------------------------
[Port1] : USB Mass Storage Device -----------------------------------------
[Device Information]
Device Manufacturer: Sony
Product Name: Storage Media
Serial Number: CB4001306170003175
USB Version Supported: 2.00
USB Device Speed: USB 2.0 High-speed
Driver Description: USB Mass Storage Device
Hardware ID: USB\VID_054C&PID_05BA
[Driver Information]
Driver Manufacturer: Compatible USB storage device
Driver Description: USB Mass Storage Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.0
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_054C&PID_05BA\CB4001306170003175
[Port2] : No Device Connected ---------------------------------------------
[Port3] : No Device Connected ---------------------------------------------
[Port4] : No Device Connected ---------------------------------------------
[Port5] : No Device Connected ---------------------------------------------
[Port6] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - High Definition Audio [A3] ---------------------------
[General Information]
Device Name: Intel 82801IB ICH9 - High Definition Audio [A3]
Original Device Name: Intel 82801IB ICH9 - High Definition Audio [A3]
Device Class: Mixed mode device
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:27:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_293E&SUBSYS_293E8086&REV_03
[PCI Express]
Version: 1.1
Current Link Width: Not negotiated
Device/Port Type: Root Complex Integrated Endpoint
Slot Implemented: No
Emergency Power Reduction: Not Supported
Active State Power Management (ASPM) Support: None
Active State Power Management (ASPM) Status: Disabled
L0s Exit Latency: < 64 ns
L1 Exit Latency: < 1 us
[System Resources]
Interrupt Line: IRQ22
Interrupt Pin: INTA#
Memory Base Address 0 FEBF4000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: Microsoft
Driver Description: High Definition Audio Controller
Driver Provider: Microsoft
Driver Version: 10.0.14393.0
Driver Date: 15-Jul-2016
DeviceInstanceId PCI\VEN_8086&DEV_293E&SUBSYS_293E8086&REV_03\3&11583659&0&D8
Intel 82801IB ICH9 - PCI Express Root Port 1 [A3] -------------------------
[General Information]
Device Name: Intel 82801IB ICH9 - PCI Express Root Port 1 [A3]
Original Device Name: Intel 82801IB ICH9 - PCI Express Root Port 1 [A3]
Device Class: PCI-to-PCI Bridge
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:28:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2940&SUBSYS_00000000&REV_03
[PCI Express]
Version: 1.1
Maximum Link Width: 1x
Current Link Width: Not negotiated
Maximum Link Speed: 2.5 GT/s
Current Link Speed: 2.5 GT/s
Device/Port Type: Root Port of PCI Express Root Complex
Slot Implemented: Yes
Hot-Plug: Capable
Hot-Plug Surprise: Capable
Slot Power Limit: 10.000 W
Emergency Power Reduction: Not Supported
Active State Power Management (ASPM) Support: L0s and L1
Active State Power Management (ASPM) Status: Disabled
L0s Exit Latency: 128 - 256 ns
L1 Exit Latency: 2 - 4 us
[System Resources]
Interrupt Line: IRQ5
Interrupt Pin: INTA#
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2940&SUBSYS_29408086&REV_03\3&11583659&0&E0
PCI Express x1 Bus #2 -----------------------------------------------------
Intel 82801IB ICH9 - PCI Express Root Port 6 [A3] -------------------------
[General Information]
Device Name: Intel 82801IB ICH9 - PCI Express Root Port 6 [A3]
Original Device Name: Intel 82801IB ICH9 - PCI Express Root Port 6 [A3]
Device Class: PCI-to-PCI Bridge
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:28:5
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_294A&SUBSYS_00000000&REV_03
[PCI Express]
Version: 1.1
Maximum Link Width: 1x
Current Link Width: 1x
Maximum Link Speed: 2.5 GT/s
Current Link Speed: 2.5 GT/s
Device/Port Type: Root Port of PCI Express Root Complex
Slot Implemented: Yes
Hot-Plug: Capable
Hot-Plug Surprise: Capable
Slot Power Limit: 10.000 W
Emergency Power Reduction: Not Supported
Active State Power Management (ASPM) Support: L0s and L1
Active State Power Management (ASPM) Status: Disabled
L0s Exit Latency: 128 - 256 ns
L1 Exit Latency: 2 - 4 us
[System Resources]
Interrupt Line: IRQ10
Interrupt Pin: INTB#
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family PCI Express Root Port 6 - 294A
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_294A&SUBSYS_294A8086&REV_03\3&11583659&0&E5
PCI Express x1 Bus #3 -----------------------------------------------------
RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC ----------------
[General Information]
Device Name: RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC
Original Device Name: RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC
Device Class: Ethernet Adapter
Revision ID: 5
PCI Address (Bus:Device:Function) Number: 3:0:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05
[PCI Express]
Version: 1.1
Maximum Link Width: 1x
Current Link Width: 1x
Maximum Link Speed: 2.5 GT/s
Current Link Speed: 2.5 GT/s
Device/Port Type: PCI Express Endpoint
Slot Implemented: No
Emergency Power Reduction: Not Supported
Active State Power Management (ASPM) Support: L0s and L1
Active State Power Management (ASPM) Status: Disabled
L0s Exit Latency: >4 us
L1 Exit Latency: 32 - 64 us
[System Resources]
Interrupt Line: N/A
Interrupt Pin: INTA#
I/O Base Address 0 E800
Memory Base Address 2 FDFFF000
Memory Base Address 4 FDFF8000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: Realtek
Driver Description: Realtek PCIe FE Family Controller
Driver Provider: Realtek
Driver Version: 10.12.1007.2016
Driver Date: 07-Oct-2016
DeviceInstanceId PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&3AE325C1&0&00E5
Intel 82801IB ICH9 - USB Universal Host Controller #1 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #1 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #1 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:29:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2934&SUBSYS_29348086&REV_03
[System Resources]
Interrupt Line: IRQ23
Interrupt Pin: INTA#
I/O Base Address 4 CC00
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2934
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2934&SUBSYS_29348086&REV_03\3&11583659&0&E8
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - USB Universal Host Controller #2 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #2 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #2 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:29:1
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2935&SUBSYS_29358086&REV_03
[System Resources]
Interrupt Line: IRQ19
Interrupt Pin: INTB#
I/O Base Address 4 C880
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2935
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2935&SUBSYS_29358086&REV_03\3&11583659&0&E9
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - USB Universal Host Controller #3 [A3] ----------------
[General Information]
Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #3 [A3]
Original Device Name: Intel 82801IB ICH9 - USB Universal Host Controller #3 [A3]
Device Class: USB UHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:29:2
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2936&SUBSYS_29368086&REV_03
[System Resources]
Interrupt Line: IRQ18
Interrupt Pin: INTC#
I/O Base Address 4 C800
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 1.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB Universal Host Controller - 2936
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2936&SUBSYS_29368086&REV_03\3&11583659&0&EA
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel 82801IB ICH9 - Enhanced USB2 Controller #1 [A3] ---------------------
[General Information]
Device Name: Intel 82801IB ICH9 - Enhanced USB2 Controller #1 [A3]
Original Device Name: Intel 82801IB ICH9 - Enhanced USB2 Controller #1 [A3]
Device Class: USB EHCI Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:29:7
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_293A&SUBSYS_293A8086&REV_03
[System Resources]
Interrupt Line: IRQ23
Interrupt Pin: INTA#
Memory Base Address 0 FEBFB800
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
USB Version Supported: 2.0
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
Driver Provider: Intel
Driver Version: 9.1.9.1004
Driver Date: 09-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_293A&SUBSYS_293A8086&REV_03\3&11583659&0&EF
USB Root Hub --------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
[Port3] : No Device Connected ---------------------------------------------
[Port4] : No Device Connected ---------------------------------------------
[Port5] : No Device Connected ---------------------------------------------
[Port6] : No Device Connected ---------------------------------------------
Intel 82801IBM ICH9-M Direct Media Interface Bridge [A3] ------------------
[General Information]
Device Name: Intel 82801IBM ICH9-M Direct Media Interface Bridge [A3]
Original Device Name: Intel 82801IBM ICH9-M Direct Media Interface Bridge [A3]
Device Class: PCI-to-PCI Bridge
Revision ID: 93
PCI Address (Bus:Device:Function) Number: 0:30:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_93
[System Resources]
Interrupt Line: N/A
Interrupt Pin: N/A
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: (Standard system devices)
Driver Description: PCI-to-PCI Bridge
Driver Provider: Microsoft
Driver Version: 10.0.14393.594
Driver Date: 21-Jun-2006
DeviceInstanceId PCI\VEN_8086&DEV_2448&SUBSYS_24488086&REV_93\3&11583659&0&F0
[ICH Configuration]
High Priority PCI: Disabled
15-16MB Hole: Disabled
Discard Timer Mode [ICH2]: 128 PCICLKs (4 us)
32-Clock Retry [ICH2]/12-Clock Retry [ICH3/4]: Disabled
[Multi-Transaction Timer]
Multi-Transaction Timer Count Value: 0 PCICLKs
[Error Command]
SERR# On Target Abort Receive: Disabled
SERR# On Delayed Transaction Timeout: Disabled
PCI Bus #1 ----------------------------------------------------------------
Intel 82801IEM ICH9M - LPC Bridge [A3] ------------------------------------
[General Information]
Device Name: Intel 82801IEM ICH9M - LPC Bridge [A3]
Original Device Name: Intel 82801IEM ICH9M - LPC Bridge [A3]
Device Class: PCI-to-ISA Bridge
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:31:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2917&SUBSYS_29178086&REV_03
[System Resources]
Interrupt Line: N/A
Interrupt Pin: N/A
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9M-E LPC Interface Controller - 2917
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2917&SUBSYS_29178086&REV_03\3&11583659&0&F8
Intel 82801IM ICH9-M - 2-Port SATA Controller [A3] ------------------------
[General Information]
Device Name: Intel 82801IM ICH9-M - 2-Port SATA Controller [A3]
Original Device Name: Intel 82801IM ICH9-M - 2-Port SATA Controller [A3]
Device Class: IDE Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:31:2
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2928&SUBSYS_29288086&REV_03
[System Resources]
Interrupt Line: N/A
Interrupt Pin: INTB#
I/O Base Address 0 0
I/O Base Address 1 0
I/O Base Address 2 0
I/O Base Address 3 0
I/O Base Address 4 FF90
I/O Base Address 5 FFA0
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_2928&SUBSYS_29288086&REV_03\3&11583659&0&FA
Intel 82801IB ICH9 - SMBus Controller [A3] --------------------------------
[General Information]
Device Name: Intel 82801IB ICH9 - SMBus Controller [A3]
Original Device Name: Intel 82801IB ICH9 - SMBus Controller [A3]
Device Class: SMBus (System Management Bus)
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:31:3
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_2930&SUBSYS_29308086&REV_03
[System Resources]
Interrupt Line: IRQ18
Interrupt Pin: INTC#
Memory Base Address 0 FEBFBC00
I/O Base Address 4 FFE0
[Features]
Bus Mastering: Disabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: ELAN SMBus
Driver Description: ELAN SMBus Driver
Driver Provider: ELAN SMBus
Driver Version: 15.1.2.9
Driver Date: 31-May-2016
DeviceInstanceId PCI\VEN_8086&DEV_2930&SUBSYS_29308086&REV_03\3&11583659&0&FB
Intel 82801IM ICH9-M - 2-Port SATA Controller [A3] ------------------------
[General Information]
Device Name: Intel 82801IM ICH9-M - 2-Port SATA Controller [A3]
Original Device Name: Intel 82801IM ICH9-M - 2-Port SATA Controller [A3]
Device Class: IDE Controller
Revision ID: 3 [A3]
PCI Address (Bus:Device:Function) Number: 0:31:5
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_292D&SUBSYS_292D8086&REV_03
[System Resources]
Interrupt Line: IRQ19
Interrupt Pin: INTB#
I/O Base Address 0 D880
I/O Base Address 1 D800
I/O Base Address 2 D480
I/O Base Address 3 D400
I/O Base Address 4 D080
I/O Base Address 5 D000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Capable
Fast Back-to-Back Transactions: Capable
[Driver Information]
Driver Manufacturer: Intel
Driver Description: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D
Driver Provider: Intel
Driver Version: 9.1.9.1005
Driver Date: 25-Jul-2013
DeviceInstanceId PCI\VEN_8086&DEV_292D&SUBSYS_292D8086&REV_03\3&11583659&0&FD
Video Adapter -------------------------------------------------------------
Intel GMA 4500(M)(HD) -----------------------------------------------------
[Video chipset]
Video Chipset: Intel GMA 4500(M)(HD)
Video Chipset Codename:
Video Memory: 1374810 KBytes
[Video Card]
Video Card: Intel GM45/47 Chipset - Integrated Graphics 0 [CR A1] [Intel]
Video Bus: PCI
Video RAMDAC: Internal
Video BIOS Version: 2107 PC 14.34 LORD 01/25/2011 18:25:56
[Performance]
Processor Clock: 88.0 MHz
Hardware ID: PCI\VEN_8086&DEV_2A42&SUBSYS_2A428086&REV_09
PCI Location (Bus:Dev:Fnc): 0:02:0
[Driver Information]
Driver Manufacturer: Intel Corporation
Driver Description: Mobile Intel(R) 4 Series Express Chipset Family
Driver Provider: Intel Corporation
Driver Version: 8.15.10.2413
Driver Date: 03-Jun-2011
DeviceInstanceId PCI\VEN_8086&DEV_2A42&SUBSYS_2A428086&REV_09\3&11583659&0&10
Mobile Intel(R) 4 Series Express Chipset Family ---------------------------
[Video chipset]
Video Chipset: Mobile Intel(R) 4 Series Express Chipset Family
Video Chipset Codename:
Video Memory: 1374810 KBytes
[Video Card]
Video Card: Intel GM45/47 Chipset - Integrated Graphics 1 [CR A1] [Intel]
Video Bus: PCI
Video BIOS Version: 2107 PC 14.34 LORD 01/25/2011 18:25:56
[Performance]
Hardware ID: PCI\VEN_8086&DEV_2A43&SUBSYS_2A428086&REV_09
PCI Location (Bus:Dev:Fnc): 0:02:1
[Driver Information]
Driver Manufacturer: Intel Corporation
Driver Description: Mobile Intel(R) 4 Series Express Chipset Family
Driver Provider: Intel Corporation
Driver Version: 8.15.10.2413
Driver Date: 03-Jun-2011
DeviceInstanceId PCI\VEN_8086&DEV_2A43&SUBSYS_2A428086&REV_09\3&11583659&0&11
Monitor -------------------------------------------------------------------
DELL [Unknown Model: DELD079] ---------------------------------------------
[General information]
Monitor Name: DELL [Unknown Model: DELD079]
Monitor Name (Manuf): DELL S2216H
Serial Number: VJRF75A41C2T
Date Of Manufacture: Week: 40, Year: 2015
Monitor Hardware ID: Monitor\DELD079
Max. Vertical Size: 27 cm
Max. Horizontal Size: 48 cm
Horizontal Frequency: 30 - 83 kHz
Vertical Frequency: 56 - 76 Hz
Maximum Pixel Clock: 170 MHz
[Advanced parameters]
Input Signal: Analog: 0.700 V / 0.300 V (1.000 V p-p)
Display Type: RGB color
Gamma Factor: 2.20
[DPMS Modes]
Standby: Supported
Suspend: Supported
Active Off: Supported
Standard Colour Space: Not Supported
Preferred Timing Mode: Supported
Default GTF Supported: Not Supported
[DPMS Input Signal]
Serration VSync: Not Supported
Sync On Green: Supported
Composite Sync: Supported
Separate Syncs: Supported
Blank-to-black Setup: Not Supported
[Supported Video Modes]
1152 x 864 75 Hz
1280 x 1024 60 Hz
1600 x 900 60 Hz
1920 x 1080 60 Hz
1920 x 1080 476 x 268 mm, Pixel Clock 148.50 MHz
Drives --------------------------------------------------------------------
(S)ATA/ATAPI Drives -------------------------------------------------------
ST3500413AS ---------------------------------------------------------------
[General Information]
Drive Controller: Serial ATA 6Gb/s @ 3Gb/s
Drive Model: Seagate ST3500413AS
Drive Revision: JC4B
Drive Serial Number: Z3T6PWHD
World Wide Name: 5000C5003CCC9A31
Drive Capacity: 476,940 MBytes (500 GB)
Drive Capacity [MB]: 476940
Media Rotation Rate: 7200 RPM
ATA Major Version Supported: ATA/ATAPI-5, ATA/ATAPI-6, ATA/ATAPI-7, ATA8-ACS
ATA Minor Version Supported: ATA8-ACS version 4
ATA Transport Version Supported: SATA 3.0
[Drive Geometry]
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Number Of ECC Bytes: 4
Number of Sectors: 16514064
Total 32-bit LBA Sectors: 268435455
Total 48-bit LBA Sectors: 976773168
Logical Sector Size: 512 Bytes
Cache Buffer Size: 16384 KBytes
[Transfer Modes]
Sectors Per Interrupt: Total: 16, Active: 16
Max. PIO Transfer Mode: 4
Multiword DMA Mode: Total: 2, Active: -
Singleword DMA Mode: Total: -, Active: -
Ultra-DMA Mode: Total: 6 (ATA-133), Active: 5 (ATA-100)
Max. Multiword DMA Transfer Rate: 16.7 MBytes/s
Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s
Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s
Transfer Width: 16-bit
Native Command Queuing: Supported, Max. Depth: 32
TRIM Command: Not Supported
[Device flags]
Fixed Drive: Present
Removable Drive: Not Present
Magnetic Storage: Present
LBA Mode: Supported
DMA Mode: Supported
IORDY: Supported
IORDY Disableable: Supported
[Features]
Write Cache: Present, Active
S.M.A.R.T. Feature: Present, Active
Security Feature: Present, Inactive
Removable Media Feature: Not Present, Disabled
Power Management: Present, Active
Advanced Power Management: Not Present, Inactive
Packet Interface: Not Present, Disabled
Look-Ahead Buffer: Present, Active
Host Protected Area: Present, Enabled
Power-Up In Standby: Not Suppported, Inactive
Automatic Acoustic Management: Supported, Active
48-bit LBA: Supported, Active
Host-Initiated Link Power Management: Not Supported
Device-Initiated Link Power Management: Supported, Disabled
In-Order Data Delivery: Not Supported
Hardware Feature Control: Not Supported
Software Settings Preservation: Supported, Enabled
NCQ Autosense: Not Supported
Link Power State Device Sleep: Not Supported
Hybrid Information Feature: Not Supported
Rebuild Assist: Not Supported
Power Disable: Not Supported
All Write Cache Non-Volatile: Not Supported
Extended Number of User Addressable Sectors: Not Supported
CFast Specification: Not Supported
NCQ Priority Information: Not Supported
Host Automatic Partial to Slumber Transitions: Not Supported
Device Automatic Partial to Slumber Transitions: Not Supported
NCQ Streaming: Not Supported
NCQ Queue Management Command: Not Supported
DevSleep to Reduced Power State: Not Supported
Extended Power Conditions Feature: Not Supported
Sense Data Reporting Feature: Not Supported
Free-Fall Control Feature: Not Supported
Write-Read-Verify Feature: Supported, Disabled
[Security]
Security Feature: Supported
Security Status: Disabled
Security Locked: Disabled
Security Frozen: Enabled
Enhanced Security Erase: Supported
Sanitize Feature: Not Supported
Sanitize Device - Crypto Scramble: Not Supported
Sanitize Device - Overwrite: Not Supported
Sanitize Device - Block Erase: Not Supported
Sanitize Device - Antifreeze Lock: Not Supported
Device Encrypts All User Data: Not Supported
Trusted Computing: Not Supported
[Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)]
[01] Raw Read Error Rate: 106/6, Worst: 90 (Data = 10606208,0)
[03] Spin Up Time: 100/Always OK, Worst: 100
[04] Start/Stop Count: 96/20, Worst: 96 (Data = 4221,0)
[05] Reallocated Sector Count: 100/36, Worst: 100
[07] Seek Error Rate: 84/30, Worst: 60 (Data = 251069077,1)
[09] Power-On Hours/Cycle Count: 95/Always OK, Worst: 95 (4733 hours / 197.2 days)
[0A] Spin Retry Count: 100/97, Worst: 100
[0C] Power Cycle Count: 97/20, Worst: 97 (Data = 4072,0)
[B7] SATA Interface Downshift / Runtime Bad Block: 100/Always OK, Worst: 100
[B8] End to End Error Detection Count: 100/99, Worst: 100
[BB] Reported Uncorrectable Errors: 1/Always OK, Worst: 1 (Data = 624,0)
[BC] Command Timeout Count: 100/Always OK, Worst: 96 (Data = 66385,1)
[BD] High Fly Writes 99/Always OK, Worst: 99 (Data = 1,0)
[BE] Airflow Temperature / Exceed Count: 62/45, Worst: 48 (38.0 °C)
[C2] Temperature 38/Always OK, Worst: 52 (38.0 °C)
[C3] Hardware ECC Recovered: 48/Always OK, Worst: 30 (Data = 10606208,0)
[C5] Current Pending Sector Count: 100/Always OK, Worst: 100
[C6] Off-Line Uncorrectable Sector Count: 100/Always OK, Worst: 100
[C7] UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200
[F0] Head Flying Hours: 100/Always OK, Worst: 253 (Data = 15342,35311)
[F1] Lifetime Writes from Host (LBAs Written): 100/Always OK, Worst: 253 (Data = 108502713,0)
[F2] Lifetime Reads from Host (LBAs Read): 100/Always OK, Worst: 253 (Data = 1603955175,0)
HL-DT-ST DVDRAM GH22NS50 --------------------------------------------------
[General information]
Drive Model: HL-DT-ST DVDRAM GH22NS50
Drive Revision: TN03
Firmware Date: 2010-02-26 12:34:56
Serial Number: K0021DJ5749
Device Type: DVD+R DL
[Device capabilities]
Drive can read: CD-R, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL
Drive can write: CD-R, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL
Audio ---------------------------------------------------------------------
Intel 82801IB ICH9 - High Definition Audio [A3] ---------------------------
Audio Adapter: Intel 82801IB ICH9 - High Definition Audio [A3]
Audio Controller Hardware ID: PCI\VEN_8086&DEV_293E&SUBSYS_293E8086&REV_03
High Definition Audio Codec: RealTek ALC662
Audio Codec Hardware ID: HDAUDIO\FUNC_03&VEN_10EC&DEV_0662&SUBSYS_00000000
Network -------------------------------------------------------------------
RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC ----------------
[General information]
Network Card: RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC
Vendor Description: Realtek PCIe FE Family Controller
MAC Address: 00-E0-4C-04-08-E5
[Capabilities]
Maximum Link Speed: 100 Mbps
Transmit Buffer Size: 96896 Bytes
Receive Buffer Size: 775168 Bytes
Hardware ID: PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05
[Driver Information]
Driver Manufacturer: Realtek
Driver Description: Realtek PCIe FE Family Controller
Driver Provider: Realtek
Driver Version: 10.12.1007.2016
Driver Date: 07-Oct-2016
DeviceInstanceId PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&3AE325C1&0&00E5
Ports ---------------------------------------------------------------------
Serial Ports --------------------------------------------------------------
Parallel Ports ------------------------------------------------------------
USB -----------------------------------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2939 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2935 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2938 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : USB Input Device ------------------------------------------------
[Device Information]
Device Manufacturer: PixArt
Product Name: USB Optical Mouse
Serial Number: N/A
USB Version Supported: 2.00
USB Device Speed: USB 1.1 Low-speed
Driver Description: USB Input Device
Hardware ID: USB\VID_04CA&PID_0061
[Driver Information]
Driver Manufacturer: (Standard system devices)
Driver Description: USB Input Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.351
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_04CA&PID_0061\5&1697A68A&0&1
[Port2] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
[Port3] : No Device Connected ---------------------------------------------
[Port4] : No Device Connected ---------------------------------------------
[Port5] : No Device Connected ---------------------------------------------
[Port6] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2936 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2934 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : No Device Connected ---------------------------------------------
Intel(R) ICH9 Family USB Universal Host Controller - 2937 -----------------
Root Hub ------------------------------------------------------------------
[Port1] : No Device Connected ---------------------------------------------
[Port2] : USB Composite Device --------------------------------------------
[Device Information]
Device Manufacturer: Logitech
Product Name: USB Keyboard
Serial Number: N/A
USB Version Supported: 1.10
USB Device Speed: USB 1.1 Low-speed
Driver Description: USB Composite Device
Hardware ID: USB\VID_046D&PID_C31D
[Driver Information]
Driver Manufacturer: (Standard USB Host Controller)
Driver Description: USB Composite Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.0
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_046D&PID_C31D\5&14FAFB3D&0&2
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C -----------------
Root Hub ------------------------------------------------------------------
[Port1] : USB Mass Storage Device -----------------------------------------
[Device Information]
Device Manufacturer: Sony
Product Name: Storage Media
Serial Number: CB4001306170003175
USB Version Supported: 2.00
USB Device Speed: USB 2.0 High-speed
Driver Description: USB Mass Storage Device
Hardware ID: USB\VID_054C&PID_05BA
[Driver Information]
Driver Manufacturer: Compatible USB storage device
Driver Description: USB Mass Storage Device
Driver Provider: Microsoft
Driver Version: 10.0.14393.0
Driver Date: 21-Jun-2006
DeviceInstanceId USB\VID_054C&PID_05BA\CB4001306170003175
[Port2] : No Device Connected ---------------------------------------------
[Port3] : No Device Connected ---------------------------------------------
[Port4] : No Device Connected ---------------------------------------------
[Port5] : No Device Connected ---------------------------------------------
[Port6] : No Device Connected ---------------------------------------------
Offline