You are not logged in.
Pages: 1
I got this https://www.massdrop.com/buy/fostex-x-massdrop-th-x00 today and I tried it on 2 android and 1 windows 10 devices and it worked fine, but the sound is pretty odd while using it on Arch.
I used an earphone until now and it works pretty fine.
I don't know how to troubleshoot this problem. I am not really knowledgeable about this domain. I didn't understand most of the content of the wiki pages.
Edit:
I am not sure if this piece has to do something with the problem http://storage6.static.itmages.com/i/17 … 4e20d.jpeg
Since you need to register to check the device:
Specs
Fostex x Massdrop
Closed-back design
50 mm dynamic transducer
Magnesium alloy construction
Mahogany earcups, brilliant gloss finish
Leatherette earpads, matte black
Magnetic flux density: >1 tesla
Impedance: 25 ohms
Sensitivity: 94 dB/mW
Maximum input: 1,800 mW
Frequency response: 5–45,000 Hz
10 ft (3 m) thick, braided Y cable
1/4 in (6.3 mm) gold-coated stereo phone plug
Weight, without cable: 12.3 oz (350 g)
Weight, with cable: 17 oz (482 g)
Included
Carrying pouch
2-year warranty
1/4" to 1/8" adapter (for use with portable devices)
The problem was: The jack wasn't fully in and needed some force to budge.
Last edited by yasserKaddoura (2017-07-23 15:50:50)
Offline
What's the problem more exactly in the picture?
Are you using some kind of 3.5 mm adapter?
Offline
It's not a problem. I talked to someone about the problem that I am having and he told me that the problem might be caused by that adapter. I updated the post: It's 1/4" to 1/8" adapter.
Offline
It's not a problem. I talked to someone about the problem that I am having and he told me that the problem might be caused by that adapter. I updated the post: It's 1/4" to 1/8" adapter.
What "problem" are you experience? Please use the guide: "How to ask questions the smart way" as an inspiration in order for Your question to be understood by the Arch Community.
Regards
Martin
It is advised to follow the How to post guide when posting on the Arch forum. If one consciously jumps over these elementary steps like reading the wiki and providing necessary information about the problem, one can be regarded as a Help Vampire.
Offline
I don't know how to describe it. There is audio, but it's strange. The actor's voice is pretty low and the sound is not normal. I am not familiar with audio terminologies. I apologize for that. I will try to ask my brother when I get back from work. He might know something.
Last edited by yasserKaddoura (2017-07-21 11:31:26)
Offline
I don't know how to describe it.
Did you read the guide about "How to ask questions" I provided in post 4?
To troubleshoot audio you can use:
- Alsa: Alsa troubleshooting guide
- Pulse: Pulse troubleshooting guide
Regards
Martin
Last edited by onslow77 (2017-07-21 11:58:34)
It is advised to follow the How to post guide when posting on the Arch forum. If one consciously jumps over these elementary steps like reading the wiki and providing necessary information about the problem, one can be regarded as a Help Vampire.
Offline
yasserKaddoura wrote:I don't know how to describe it.
Did you read the guide about "How to ask questions" I provided in post 4?
I did skim through it and noticed this in bold Be precise and informative about your problem .
I thought the way of how the audio is altered isn't the matter here. I will try to see how I can define the alteration.
Aha, I didn't notice the pages that you referred. I will go through them when I get back home.
Last edited by yasserKaddoura (2017-07-21 12:04:22)
Offline
Pages: 1