Arch Linux

halgi

Member

Registered: 2016-05-19

Posts: 27

[SOLVED] Dolphin emmulator and mayflash gamecube adapter

I have followed the instructions here. And dolphin emu still cant see my adapter.

I have also tried to use the this but it still doesnt work.

Here is the output of lsusb:

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 003 Device 004: ID 0d8c:0014 C-Media Electronics, Inc. 
Bus 003 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 003 Device 002: ID 045e:0779 Microsoft Corp. LifeCam HD-3000
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04d9:a070 Holtek Semiconductor, Inc. 
Bus 001 Device 004: ID 057e:0337 Nintendo Co., Ltd 
Bus 001 Device 002: ID 04d9:a0d1 Holtek Semiconductor, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I have tried to see the controller using

jstest-sdk

and I could not see it.

Does anyone have any ideas on what the problem is ?

Last edited by halgi (2017-08-08 13:34:49)

halgi

Member

Registered: 2016-05-19

Posts: 27

Re: [SOLVED] Dolphin emmulator and mayflash gamecube adapter

I can now see my 4 ports in dolphin emulator, I forgot to turn the switch at the back to pc Still, my controller doesnt seem to be detected. I also dont see anything in dmesg when I unplug my controller from the adapter.

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,074

Re: [SOLVED] Dolphin emmulator and mayflash gamecube adapter

Both of the things you link to are for the official adapter. If you switched your own adapter to PC there's a good chance that the automatic detection doesn't work anyway, but you should be able to configure it manually as a normal controller, does that not work?

Mod note: Please don't bump and double post into topics, you can append new info to the initial post by editing it.

Last edited by V1del (2017-07-31 07:55:06)

halgi

Member

Registered: 2016-05-19

Posts: 27

Re: [SOLVED] Dolphin emmulator and mayflash gamecube adapter

I am using the mayflash adapter, The problem is I cant see the controller come up in jstest-gtk at all so how can i configure it ?

Here is the dmesg output when the adapter is set to PC mode:

[  431.941301] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[  432.328486] input: mayflash limited MAYFLASH GameCube Controller Adapter as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:0079:1844.000C/input/input25
[  432.328633] hid_mf 0003:0079:1844.000C: input,hidraw7: USB HID v1.10 Joystick [mayflash limited MAYFLASH GameCube Controller Adapter] on usb-0000:03:00.0-10/input0
[  432.328640] hid_mf 0003:0079:1844.000C: Force feedback for HJZ Mayflash game controller adapters by Marcel Hasler <mahasler@gmail.com>
[  432.340483] input: mayflash limited MAYFLASH GameCube Controller Adapter as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:0079:1844.000D/input/input26
[  432.340623] hid_mf 0003:0079:1844.000D: input,hidraw8: USB HID v1.10 Joystick [mayflash limited MAYFLASH GameCube Controller Adapter] on usb-0000:03:00.0-10/input1
[  432.340630] hid_mf 0003:0079:1844.000D: Force feedback for HJZ Mayflash game controller adapters by Marcel Hasler <mahasler@gmail.com>
[  432.352503] input: mayflash limited MAYFLASH GameCube Controller Adapter as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.2/0003:0079:1844.000E/input/input27
[  432.352662] hid_mf 0003:0079:1844.000E: input,hidraw9: USB HID v1.10 Joystick [mayflash limited MAYFLASH GameCube Controller Adapter] on usb-0000:03:00.0-10/input2
[  432.352671] hid_mf 0003:0079:1844.000E: Force feedback for HJZ Mayflash game controller adapters by Marcel Hasler <mahasler@gmail.com>
[  432.364489] input: mayflash limited MAYFLASH GameCube Controller Adapter as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.3/0003:0079:1844.000F/input/input28
[  432.364677] hid_mf 0003:0079:1844.000F: input,hidraw10: USB HID v1.10 Joystick [mayflash limited MAYFLASH GameCube Controller Adapter] on usb-0000:03:00.0-10/input3
[  432.364689] hid_mf 0003:0079:1844.000F: Force feedback for HJZ Mayflash game controller adapters by Marcel Hasler <mahasler@gmail.com>

Here is the dmesg output when set to wiiu mode:

[  483.018721] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[  483.416154] hid-generic 0003:057E:0337.0010: hiddev0,hidraw7: USB HID v1.10 Device [Nintendo WUP-028] on usb-0000:03:00.0-10/input0

Yeah I should have edited my post instead my bad.

halgi

Member

Registered: 2016-05-19

Posts: 27

Re: [SOLVED] Dolphin emmulator and mayflash gamecube adapter

It turns out it was a hardware problem, I changed controllers (same brand and everything) and it worked.