You are not logged in.
- Topics: Active | Unanswered
#1 2017-08-24 14:41:50
- TaleLore
- Member
- Registered: 2017-08-24
- Posts: 4
Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
In Arch linux, but not Windows on the same machine, I have extremely sluggish internet about 90% of the time. This applies to Firefox, Steam, pacman, wget, etc. I've got a BCM4352 network controller and in Arch I'm running the wl drivers (I think the only compatible drivers). I've tried netctl and connman, but the problem persists with both. I also tried switching nameservers, but that didn't help. I have noticed that if I do
The results of
time wget http://www.google.ca/ vary pretty wildly, but here it is right now:
--2017-08-24 08:30:37-- http://www.google.ca/
Resolving www.google.ca... 2607:f8b0:400a:808::2003, 172.217.3.163
Connecting to www.google.ca|2607:f8b0:400a:808::2003|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html.1’
index.html.1 [ <=> ] 10.79K --.-KB/s in 0.03s
2017-08-24 08:30:37 (353 KB/s) - ‘index.html.1’ saved [11051]
real 0m30.465s
user 0m0.034s
sys 0m0.006sdmesg:
[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[ 0.000000] Linux version 4.12.8-2-ARCH (builduser@foutrelis) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Fri Aug 18 14:08:02 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3354796-3aeb-4262-8b24-03890fbb8aed rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7a95fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7a96000-0x00000000b7a9cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7a9d000-0x00000000b7efdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7efe000-0x00000000b8376fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8377000-0x00000000dda8dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dda8e000-0x00000000ddc9cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddc9d000-0x00000000ddcb8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddcb9000-0x00000000de1e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de1e2000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/MAXIMUS VII IMPACT, BIOS 2304 02/12/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0410000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0418000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 041C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 041E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff9fdc800fd850]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9fdc80097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x22ed5f000, 0x22ed5ffff] PGTABLE
[ 0.000000] BRK [0x22ed60000, 0x22ed60fff] PGTABLE
[ 0.000000] BRK [0x22ed61000, 0x22ed61fff] PGTABLE
[ 0.000000] BRK [0x22ed62000, 0x22ed62fff] PGTABLE
[ 0.000000] BRK [0x22ed63000, 0x22ed63fff] PGTABLE
[ 0.000000] BRK [0x22ed64000, 0x22ed64fff] PGTABLE
[ 0.000000] BRK [0x22ed65000, 0x22ed65fff] PGTABLE
[ 0.000000] BRK [0x22ed66000, 0x22ed66fff] PGTABLE
[ 0.000000] BRK [0x22ed67000, 0x22ed67fff] PGTABLE
[ 0.000000] BRK [0x22ed68000, 0x22ed68fff] PGTABLE
[ 0.000000] BRK [0x22ed69000, 0x22ed69fff] PGTABLE
[ 0.000000] BRK [0x22ed6a000, 0x22ed6afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x370ea000-0x3786cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DDCA2080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDCB10A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDCA2198 00EF08 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DE1E1F80 000040
[ 0.000000] ACPI: APIC 0x00000000DDCB11B0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDCB1248 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DDCB1290 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDCB1F10 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDCB2450 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DDCB2FC8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDCB3008 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDCB3040 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDCB33B0 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DDCB8D80 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41effb000-0x41effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7a95fff]
[ 0.000000] node 0: [mem 0x00000000b7a9d000-0x00000000b7efdfff]
[ 0.000000] node 0: [mem 0x00000000b8377000-0x00000000dda8dfff]
[ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.000000] On node 0 totalpages: 4179371
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14105 pages used for memmap
[ 0.000000] DMA32 zone: 902671 pages, LIFO batch:31
[ 0.000000] Normal zone: 51136 pages used for memmap
[ 0.000000] Normal zone: 3272704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7a96000-0xb7a9cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7efe000-0xb8376fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdda8e000-0xddc9cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddc9d000-0xddcb8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddcb9000-0xde1e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde1e2000-0xdeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9fe09ec00000 s106328 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4114045
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3354796-3aeb-4262-8b24-03890fbb8aed rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16366668K/16717484K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 350816K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 27933 entries in 110 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3998.007 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.18 BogoMIPS (lpj=13326690)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170303
[ 0.012169] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.012184] Security Framework initialized
[ 0.012184] Yama: becoming mindful.
[ 0.012585] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014348] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015134] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015141] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015305] CPU: Physical Processor ID: 0
[ 0.015306] CPU: Processor Core ID: 0
[ 0.015308] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.015309] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.015312] mce: CPU supports 9 MCE banks
[ 0.015317] CPU0: Thermal monitoring enabled (TM1)
[ 0.015326] process: using mwait in idle threads
[ 0.015328] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.015328] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.015740] Freeing SMP alternatives memory: 24K
[ 0.016714] smpboot: Max logical packages: 2
[ 0.016778] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.017116] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.051850] TSC deadline timer enabled
[ 0.051851] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.063337] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063358] ... version: 3
[ 0.063359] ... bit width: 48
[ 0.063359] ... generic registers: 4
[ 0.063359] ... value mask: 0000ffffffffffff
[ 0.063360] ... max period: 00007fffffffffff
[ 0.063360] ... fixed-purpose events: 3
[ 0.063360] ... event mask: 000000070000000f
[ 0.083410] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090001] smp: Bringing up secondary CPUs ...
[ 0.116674] x86: Booting SMP configuration:
[ 0.116674] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.860013] smp: Brought up 1 node, 8 CPUs
[ 0.860013] smpboot: Total of 8 processors activated (64003.93 BogoMIPS)
[ 0.863415] sched_clock: Marking stable (863333248, 0)->(886565325, -23232077)
[ 0.863708] devtmpfs: initialized
[ 0.863736] x86/mm: Memory block size: 128MB
[ 0.865159] PM: Registering ACPI NVS region [mem 0xb7a96000-0xb7a9cfff] (28672 bytes)
[ 0.865160] PM: Registering ACPI NVS region [mem 0xddcb9000-0xde1e1fff] (5410816 bytes)
[ 0.865229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.865236] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.865275] pinctrl core: initialized pinctrl subsystem
[ 0.865302] RTC time: 10:48:31, date: 08/23/17
[ 0.865349] NET: Registered protocol family 16
[ 0.865444] cpuidle: using governor ladder
[ 0.865458] cpuidle: using governor menu
[ 0.865459] PCCT header not found.
[ 0.865479] ACPI: bus type PCI registered
[ 0.865480] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.865524] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.865549] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.865552] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.865591] PCI: Using configuration type 1 for base access
[ 0.865619] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.866159] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.866159] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.866298] ACPI: Added _OSI(Module Device)
[ 0.866298] ACPI: Added _OSI(Processor Device)
[ 0.866299] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.866299] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.866504] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.869897] ACPI: Dynamic OEM Table Load:
[ 0.869900] ACPI: SSDT 0xFFFF9FE08C34D000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.870921] ACPI : EC: EC started
[ 0.870921] ACPI : EC: interrupt blocked
[ 0.870935] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.870936] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.870936] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.870937] ACPI: Interpreter enabled
[ 0.870957] ACPI: (supports S0 S3 S4 S5)
[ 0.870958] ACPI: Using IOAPIC for interrupt routing
[ 0.870975] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.871582] ACPI: Power Resource [PG00] (on)
[ 0.871741] ACPI: Power Resource [PG01] (on)
[ 0.871892] ACPI: Power Resource [PG02] (on)
[ 0.876193] ACPI: Power Resource [FN00] (off)
[ 0.876229] ACPI: Power Resource [FN01] (off)
[ 0.876264] ACPI: Power Resource [FN02] (off)
[ 0.876300] ACPI: Power Resource [FN03] (off)
[ 0.876334] ACPI: Power Resource [FN04] (off)
[ 0.876927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.876930] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.877055] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.877128] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.877455] PCI host bridge to bus 0000:00
[ 0.877456] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.877457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.877457] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.877458] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.877458] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.877459] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.877459] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.877460] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.877460] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.877461] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.877462] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.877466] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.877516] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.877538] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.877586] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.877623] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.877636] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.877681] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.877713] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.877731] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.877744] pci 0000:00:16.0: reg 0x10: [mem 0xf713a000-0xf713a00f 64bit]
[ 0.877792] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.877844] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.877855] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.877860] pci 0000:00:19.0: reg 0x14: [mem 0xf7138000-0xf7138fff]
[ 0.877866] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.877909] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.877937] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.877956] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.877969] pci 0000:00:1a.0: reg 0x10: [mem 0xf7137000-0xf71373ff]
[ 0.878036] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.878066] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.878084] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.878096] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.878148] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.878184] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.878201] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.878249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.878292] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.878310] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.878359] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.878401] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.878422] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.878435] pci 0000:00:1d.0: reg 0x10: [mem 0xf7136000-0xf71363ff]
[ 0.878501] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.878532] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.878550] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.878670] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.878679] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.878683] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.878688] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.878693] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.878698] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.878702] pci 0000:00:1f.2: reg 0x24: [mem 0xf7135000-0xf71357ff]
[ 0.878728] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.878763] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.878773] pci 0000:00:1f.3: reg 0x10: [mem 0xf7134000-0xf71340ff 64bit]
[ 0.878788] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.878859] pci 0000:01:00.0: [10de:17c2] type 00 class 0x030000
[ 0.878872] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.878880] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.878888] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.878894] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.878899] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.878959] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.878977] pci 0000:01:00.1: [10de:0fb0] type 00 class 0x040300
[ 0.878986] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.879072] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.879073] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.879074] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.879076] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.879118] acpiphp: Slot [1] registered
[ 0.879120] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.879178] pci 0000:03:00.0: [14e4:43b1] type 00 class 0x028000
[ 0.879206] pci 0000:03:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
[ 0.879221] pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf73fffff 64bit]
[ 0.879324] pci 0000:03:00.0: supports D1 D2
[ 0.879324] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.879374] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.886697] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.886700] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.887043] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.887070] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.887096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.887121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.887147] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.887173] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.887199] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.887225] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.887394] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.887421] ACPI : EC: interrupt unblocked
[ 0.887425] ACPI : EC: event unblocked
[ 0.887428] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.887429] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.887467] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.887469] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.887469] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.887470] vgaarb: loaded
[ 0.887488] EDAC MC: Ver: 3.0.0
[ 0.887551] PCI: Using ACPI for IRQ routing
[ 0.888647] PCI: pci_cache_line_size set to 64 bytes
[ 0.888681] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.888682] e820: reserve RAM buffer [mem 0xb7a96000-0xb7ffffff]
[ 0.888683] e820: reserve RAM buffer [mem 0xb7efe000-0xb7ffffff]
[ 0.888683] e820: reserve RAM buffer [mem 0xdda8e000-0xdfffffff]
[ 0.888684] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.888684] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 0.888727] NetLabel: Initializing
[ 0.888728] NetLabel: domain hash size = 128
[ 0.888728] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.888735] NetLabel: unlabeled traffic allowed by default
[ 0.888901] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.888903] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.890918] clocksource: Switched to clocksource hpet
[ 0.895641] VFS: Disk quotas dquot_6.6.0
[ 0.895651] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.895691] pnp: PnP ACPI init
[ 0.895755] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.895757] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.895818] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.895819] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.895830] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.895847] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.895848] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.895901] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.895902] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.895902] system 00:04: [io 0x0a00-0x0aff] has been reserved
[ 0.895904] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.895931] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.895932] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.895952] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.896093] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.896094] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.896095] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.896095] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.896096] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.896097] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.896098] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.896098] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.896099] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.896100] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.896100] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.896101] system 00:07: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.896102] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.896193] pnp: PnP ACPI: found 8 devices
[ 0.901592] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.901608] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.901609] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.901611] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.901612] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.901614] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.901621] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.901624] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.901629] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.901629] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.901630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.901631] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.901631] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.901632] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.901632] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.901633] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.901633] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.901634] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.901635] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.901635] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.901636] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.901636] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf74fffff]
[ 0.901697] NET: Registered protocol family 2
[ 0.901787] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.901892] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.901980] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.902000] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.902028] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.902073] NET: Registered protocol family 1
[ 0.940971] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.940979] PCI: CLS 64 bytes, default 64
[ 0.940999] Unpacking initramfs...
[ 0.997644] Freeing initrd memory: 7692K
[ 0.997646] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.997648] software IO TLB [mem 0xd9a8e000-0xdda8e000] (64MB) mapped at [ffff9fdd59a8e000-ffff9fdd5da8dfff]
[ 0.997831] Scanning for low memory corruption every 60 seconds
[ 0.998147] Initialise system trusted keyrings
[ 0.998153] Key type blacklist registered
[ 0.998180] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.998702] zbud: loaded
[ 0.999080] Key type asymmetric registered
[ 0.999089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.999109] io scheduler noop registered
[ 0.999110] io scheduler deadline registered
[ 0.999126] io scheduler cfq registered (default)
[ 0.999127] io scheduler mq-deadline registered
[ 0.999127] io scheduler kyber registered
[ 0.999139] io scheduler bfq registered
[ 0.999468] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.999468] vesafb: scrolling: redraw
[ 0.999469] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.999479] vesafb: framebuffer at 0xf1000000, mapped to 0xffffbce142800000, using 8128k, total 8128k
[ 1.095580] Console: switching to colour frame buffer device 240x67
[ 1.191311] fb0: VESA VGA frame buffer device
[ 1.191319] intel_idle: MWAIT substates: 0x42120
[ 1.191320] intel_idle: v0.4.1 model 0x3C
[ 1.191485] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.191581] GHES: HEST is not enabled!
[ 1.191619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.191887] Linux agpgart interface v0.103
[ 1.192169] rtc_cmos 00:02: RTC can wake from S4
[ 1.192261] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.192281] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.192286] intel_pstate: Intel P-state driver initializing
[ 1.192488] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.192545] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 1.192993] NET: Registered protocol family 10
[ 1.200012] Segment Routing with IPv6
[ 1.200050] NET: Registered protocol family 17
[ 1.201058] RAS: Correctable Errors collector initialized.
[ 1.201147] microcode: sig=0x306c3, pf=0x2, revision=0x22
[ 1.201426] microcode: Microcode Update Driver: v2.2.
[ 1.201738] registered taskstats version 1
[ 1.201752] Loading compiled-in X.509 certificates
[ 1.201793] zswap: loaded using pool lzo/zbud
[ 1.202763] Magic number: 13:587:831
[ 1.202902] rtc_cmos 00:02: setting system clock to 2017-08-23 10:48:32 UTC (1503485312)
[ 1.204383] PM: Hibernation image not present or could not be loaded.
[ 1.206423] Freeing unused kernel memory: 1324K
[ 1.206424] Write protecting the kernel read-only data: 10240k
[ 1.207115] Freeing unused kernel memory: 1640K
[ 1.248240] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.248241] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.248881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.251332] ACPI: bus type USB registered
[ 1.251345] usbcore: registered new interface driver usbfs
[ 1.251352] usbcore: registered new interface driver hub
[ 1.251375] usbcore: registered new device driver usb
[ 1.251683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.251884] ehci-pci: EHCI PCI platform driver
[ 1.252010] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.252014] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.252022] ehci-pci 0000:00:1a.0: debug port 2
[ 1.252250] SCSI subsystem initialized
[ 1.252910] libata version 3.00 loaded.
[ 1.255928] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.255934] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7137000
[ 1.267566] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.267678] hub 1-0:1.0: USB hub found
[ 1.267681] hub 1-0:1.0: 2 ports detected
[ 1.267810] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.267812] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.267820] ehci-pci 0000:00:1d.0: debug port 2
[ 1.271703] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.271707] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7136000
[ 1.286461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.287593] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.287722] hub 2-0:1.0: USB hub found
[ 1.287725] hub 2-0:1.0: 2 ports detected
[ 1.287934] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.287939] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.289008] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.289011] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.289192] hub 3-0:1.0: USB hub found
[ 1.289209] hub 3-0:1.0: 14 ports detected
[ 1.291074] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.291077] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.291212] hub 4-0:1.0: USB hub found
[ 1.291225] hub 4-0:1.0: 6 ports detected
[ 1.292212] ahci 0000:00:1f.2: version 3.0
[ 1.292359] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 1.292361] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.311492] scsi host0: ahci
[ 1.311675] scsi host1: ahci
[ 1.311820] scsi host2: ahci
[ 1.311973] scsi host3: ahci
[ 1.312095] scsi host4: ahci
[ 1.312208] scsi host5: ahci
[ 1.312246] ata1: SATA max UDMA/133 abar m2048@0xf7135000 port 0xf7135100 irq 26
[ 1.312247] ata2: DUMMY
[ 1.312249] ata3: SATA max UDMA/133 abar m2048@0xf7135000 port 0xf7135200 irq 26
[ 1.312250] ata4: SATA max UDMA/133 abar m2048@0xf7135000 port 0xf7135280 irq 26
[ 1.312251] ata5: DUMMY
[ 1.312252] ata6: DUMMY
[ 1.587567] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.607566] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.610907] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.624316] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.624367] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.624384] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.624685] ata4.00: supports DRM functions and may not be fully accessible
[ 1.625255] ata1.00: ATA-9: CT240BX200SSD1, MU01.4, max UDMA/133
[ 1.625257] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.625858] ata1.00: configured for UDMA/133
[ 1.626127] ata3.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.626135] scsi 0:0:0:0: Direct-Access ATA CT240BX200SSD1 .4 PQ: 0 ANSI: 5
[ 1.627142] ata3.00: configured for UDMA/100
[ 1.632531] ata4.00: disabling queued TRIM support
[ 1.632533] ata4.00: ATA-9: Crucial_CT512MX100SSD1, MU01, max UDMA/133
[ 1.632535] ata4.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.637231] ata4.00: supports DRM functions and may not be fully accessible
[ 1.645076] ata4.00: disabling queued TRIM support
[ 1.649423] ata4.00: configured for UDMA/133
[ 1.662030] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.675083] scsi 3:0:0:0: Direct-Access ATA Crucial_CT512MX1 MU01 PQ: 0 ANSI: 5
[ 1.724912] hub 1-1:1.0: USB hub found
[ 1.725091] hub 1-1:1.0: 6 ports detected
[ 1.729235] ata4.00: Enabling discard_zeroes_data
[ 1.729295] sd 3:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 1.729297] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.729312] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.729314] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.729327] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.729369] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.729372] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.729420] sd 0:0:0:0: [sda] Write Protect is off
[ 1.729425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.729479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.729512] ata4.00: Enabling discard_zeroes_data
[ 1.729734] sdb: sdb1 sdb2 sdb3
[ 1.730001] ata4.00: Enabling discard_zeroes_data
[ 1.730094] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.730137] sda: sda1
[ 1.730536] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.732430] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.732431] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.732517] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.741325] hub 3-1:1.0: USB hub found
[ 1.741349] hub 3-1:1.0: 4 ports detected
[ 1.751333] hub 2-1:1.0: USB hub found
[ 1.751439] hub 2-1:1.0: 8 ports detected
[ 1.800945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.806239] random: fast init done
[ 1.854197] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[ 1.942539] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.945306] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 1.945403] systemd[1]: Detected architecture x86-64.
[ 1.945600] systemd[1]: Set hostname to <Archibald>.
[ 2.024170] tsc: Refined TSC clocksource calibration: 3997.683 MHz
[ 2.024173] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x733fa1dc71e, max_idle_ns: 881590718958 ns
[ 2.037589] systemd[1]: Listening on Process Core Dump Socket.
[ 2.037626] systemd[1]: Listening on Journal Socket.
[ 2.037645] systemd[1]: Listening on udev Control Socket.
[ 2.037666] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.037674] systemd[1]: Reached target Remote File Systems.
[ 2.037687] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.037885] systemd[1]: Created slice System Slice.
[ 2.048409] vboxdrv: loading out-of-tree module taints kernel.
[ 2.049494] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 2.049680] vboxdrv: Found 8 processor cores
[ 2.057501] usb 3-1.4: new high-speed USB device number 4 using xhci_hcd
[ 2.067654] vboxdrv: TSC mode is Invariant, tentative frequency 3997667964 Hz
[ 2.067655] vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
[ 2.068294] VBoxPciLinuxInit
[ 2.074364] vboxpci: IOMMU not found (not registered)
[ 2.074762] VBoxNetAdp: Successfully started.
[ 2.075907] VBoxNetFlt: Successfully started.
[ 2.078799] systemd-journald[228]: Received request to flush runtime journal from PID 1
[ 2.148499] hub 3-1.4:1.0: USB hub found
[ 2.148515] hub 3-1.4:1.0: 4 ports detected
[ 2.260829] usb 3-7: new full-speed USB device number 5 using xhci_hcd
[ 2.324151] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.324154] ACPI: Power Button [PWRB]
[ 2.324195] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.324197] ACPI: Power Button [PWRF]
[ 2.330660] wmi: Mapper loaded
[ 2.331605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.332949] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170303/utaddress-247)
[ 2.332954] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.332956] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 2.332958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.332959] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
[ 2.332961] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 2.332963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.332963] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
[ 2.332965] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 2.332967] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.332968] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.333449] pps_core: LinuxPPS API ver. 1 registered
[ 2.333450] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.335248] PTP clock support registered
[ 2.340707] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.340872] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.340873] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.341022] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.341023] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.341111] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.341112] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.341362] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.404200] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.404730] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 2.404730] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.404731] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.404731] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.404732] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.410048] AVX2 version of gcm_enc/dec engaged.
[ 2.410050] AES CTR mode by8 optimization enabled
[ 2.419467] iTCO_vendor_support: vendor-support=0
[ 2.420009] asus_wmi: ASUS WMI generic driver loaded
[ 2.434331] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.434364] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[ 2.434402] asus_wmi: Initialization: 0x0
[ 2.434422] asus_wmi: BIOS WMI version: 0.9
[ 2.434436] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.434447] asus_wmi: SFUN value: 0x0
[ 2.434816] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[ 2.434858] asus_wmi: Number of fans: 1
[ 2.435909] wl: module license 'MIXED/Proprietary' taints kernel.
[ 2.435910] Disabling lock debugging due to kernel taint
[ 2.450376] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.461003] wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 2.462667] wl 0000:03:00.0 wlp3s0: renamed from wlan0
[ 2.470102] intel_rapl: Found RAPL domain package
[ 2.470103] intel_rapl: Found RAPL domain core
[ 2.470104] intel_rapl: Found RAPL domain dram
[ 2.472345] nct6775: Enabling hardware monitor logical device mappings.
[ 2.472354] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[ 2.497469] usb 3-1.4.1: new full-speed USB device number 6 using xhci_hcd
[ 2.524038] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[ 2.524262] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.524328] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.59 Wed Jul 19 23:53:34 PDT 2017 (using threaded interrupts)
[ 2.530156] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.59 Wed Jul 19 23:46:42 PDT 2017
[ 2.531537] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.531538] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.553152] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 08:62:66:4b:b0:5b
[ 2.553156] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.553193] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.553324] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 2.553341] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.553866] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.553869] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.556158] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 2.566451] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 2.566835] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.566836] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.566836] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.566837] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.566837] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.566838] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.566838] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.566839] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.566840] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.577533] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 2.577673] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.577711] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.577746] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.577788] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.577845] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.804125] usb 3-9: new full-speed USB device number 7 using xhci_hcd
[ 3.027438] usb 3-1.4.2: new full-speed USB device number 8 using xhci_hcd
[ 3.039531] clocksource: Switched to clocksource tsc
[ 3.197855] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.197900] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 3.197937] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 3.197989] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 3.250776] usb 3-11: new full-speed USB device number 9 using xhci_hcd
[ 3.409495] usbcore: registered new interface driver xpad
[ 3.409747] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.414734] usbcore: registered new interface driver usbhid
[ 3.414735] usbhid: USB HID core driver
[ 3.415513] input: NGC USB Gamepad NGC USB Gamepad as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.0/0003:1D57:0028.0001/input/input15
[ 3.415549] hid-generic 0003:1D57:0028.0001: input,hidraw0: USB HID v1.10 Joystick [NGC USB Gamepad NGC USB Gamepad ] on usb-0000:00:14.0-1.4.1/input0
[ 3.415601] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:1532:001C.0002/input/input16
[ 3.415623] hid-generic 0003:1532:001C.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:14.0-9/input0
[ 3.415666] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4.2/3-1.4.2:1.3/0003:0D8C:0014.0003/input/input17
[ 3.416276] Bluetooth: Core ver 2.22
[ 3.416284] NET: Registered protocol family 31
[ 3.416284] Bluetooth: HCI device and connection manager initialized
[ 3.416286] Bluetooth: HCI socket layer initialized
[ 3.416287] Bluetooth: L2CAP socket layer initialized
[ 3.416289] Bluetooth: SCO socket layer initialized
[ 3.418552] usbcore: registered new interface driver btusb
[ 3.470762] usb 3-1.4.4: new full-speed USB device number 10 using xhci_hcd
[ 3.470884] hid-generic 0003:0D8C:0014.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:14.0-1.4.2/input3
[ 3.471081] hid-generic 0003:1B1C:0C04.0004: hiddev0,hidraw3: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:14.0-11/input0
[ 3.473615] mousedev: PS/2 mouse device common for all mice
[ 3.529363] Bluetooth: hci0: BCM: chip id 63
[ 3.545370] Bluetooth: hci0: THOMAS_THE_PC
[ 3.546369] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1469
[ 3.547170] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cf.hcd failed with error -2
[ 3.547172] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cf.hcd not found
[ 3.609573] logitech-djreceiver 0003:046D:C52B.0007: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.4.4/input2
[ 3.620787] usbcore: registered new interface driver snd-usb-audio
[ 3.739510] input: Logitech M510 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.2/0003:046D:C52B.0007/0003:046D:1025.0008/input/input18
[ 3.739661] logitech-hidpp-device 0003:046D:1025.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:14.0-1.4.4:1
[ 3.745642] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.2/0003:046D:C52B.0007/0003:046D:200A.0009/input/input19
[ 3.745912] logitech-hidpp-device 0003:046D:200A.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-1.4.4:2
[ 10.509058] random: crng init done
[ 17.172831] NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
[ 17.173650] nvidia-modeset: Allocated GPU:0 (GPU-b9c3e181-7bc1-e50f-a218-bdcb3d5e8aba) @ PCI:0000:01:00.0
[ 85.593508] fuse init (API version 7.26)
[52110.076072] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800I'm relatively new to arch, so I have really no idea where to go from here.
Offline
#2 2017-08-24 14:51:17
- dockland
- Member
- From: Sweden
- Registered: 2015-06-06
- Posts: 861
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
Welcome to Arch. How did you set up your network during install? How did you install arch? Was it the same slowness during setup/installation?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
#3 2017-08-24 17:42:23
- cesura
- Package Maintainer (PM)
- From: Tallinn, Estonia
- Registered: 2010-01-23
- Posts: 1,867
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
I suspect it's a driver issue, wl has been pretty unreliable in my own experience, even from version to version. This forum post seems to be from another user experiencing the same issue, and the broadcom driver package available here supposedly fixed the sluggish network speeds.
Offline
#4 2017-08-24 17:50:10
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,722
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
Hey Brad! Always good to see hear from you.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
#5 2017-08-24 18:12:16
- cesura
- Package Maintainer (PM)
- From: Tallinn, Estonia
- Registered: 2010-01-23
- Posts: 1,867
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
ewaller wrote:
Hey Brad! Always good to see hear from you.
Thanks, it feels great to be back! 
Years ago I unfortunately had to leave the Arch community due to time constraints, but lately I've had much more time on my hands and am even considering reapplying to my former TU position.
EDIT: Dear god, you've been busy
Last edited by cesura (2017-08-24 18:19:14)
Offline
#6 2017-08-24 20:03:31
- TaleLore
- Member
- Registered: 2017-08-24
- Posts: 4
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
I installed arch a while back using a live CD I think. I was on ethernet for a while and the internet was fine then, but then I had to switch to wifi due to moving my PC. I don't remember whether or not the wifi was slow back then. I used netctl to configure the network.
I downloaded the driver package, but I don't know how to use it.
Offline
#7 2017-08-24 20:46:48
- cesura
- Package Maintainer (PM)
- From: Tallinn, Estonia
- Registered: 2010-01-23
- Posts: 1,867
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
TaleLore wrote:
I downloaded the driver package, but I don't know how to use it.
Remove any other broadcom packages that you have installed, and then run:
# pacman -U broadcom-wl-dkms-6.30.223.271-10-x86_64.pkg.tar.xzEDIT: It just occurred to me that the package in the repo that I linked is slightly out of date. Check out broadcom-wl-dkms in the [community] repo and see if you have any luck with that.
Last edited by cesura (2017-08-24 20:56:39)
Offline
#8 2017-08-25 16:07:04
- TaleLore
- Member
- Registered: 2017-08-24
- Posts: 4
Re: Desktop PC dual-booting Windows and Arch has slow wifi in Arch only
Oh, I actually have the broadcom-wl-dkms installed already. Should I try the regular broadcom-wl?
Offline