You are not logged in.

#1 2017-08-17 19:41:33

skawikk
Member
Registered: 2017-05-23
Posts: 29

SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,

First of all, sorry about my english, polish is my first language.

I have problem with instalation on PC. After instalation, when in grub i choose system, after "Loading initial ramdisk" system completly freeze. Nothing can do, even can't numlock change on keyboard.

I have:
1 SSD
2 HDDs in hardware RAID1

On SSD i have:
EFI
MSR
Win7 root partition,
Boot partition
LVM with arch root partition and, in future, debian root (now its free).
On RAID1 i have:
Win7 data
LVM with: swap, swap for deb, home, home for deb, var, var for deb

lsblk is:

NAME                      MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
loop0                       7:0    0   1.7G  1 loop  /run/archiso/sfs/root-image
sda                         8:0    0 223.6G  0 disk  
├─sda1                      8:1    0   2.1G  0 part  /mnt/boot/efi
├─sda2                      8:2    0   128M  0 part  
├─sda3                      8:3    0 142.4G  0 part  
├─sda4                      8:4    0   250M  0 part  
├─sda5                      8:5    0     2G  0 part  /mnt/boot
└─sda6                      8:6    0  76.7G  0 part  
  └─SSDluks               253:0    0  76.7G  0 crypt 
    ├─luksSSD-root        253:1    0    46G  0 lvm   /mnt
    └─luksSSD-root--kali  253:2    0  30.7G  0 lvm   
sdb                         8:16   0 931.5G  0 disk  
└─md126                     9:126  0 931.5G  0 raid1 
  ├─md126p1               259:0    0   128M  0 md    
  ├─md126p2               259:1    0 360.7G  0 md    
  └─md126p3               259:2    0 570.7G  0 md    
    └─RAIDluks            253:3    0 570.7G  0 crypt 
      ├─luksRAID-swap     253:4    0     8G  0 lvm   [SWAP]
      ├─luksRAID-swap--kali
      │                   253:5    0     8G  0 lvm   
      ├─luksRAID-var      253:6    0     8G  0 lvm   /mnt/var
      ├─luksRAID-var--kali
      │                   253:7    0     8G  0 lvm   
      ├─luksRAID-home     253:8    0   350G  0 lvm   /mnt/home
      └─luksRAID-home--kali
                          253:9    0 188.7G  0 lvm   
sdc                         8:32   0 931.5G  0 disk  
└─md126                     9:126  0 931.5G  0 raid1 
  ├─md126p1               259:0    0   128M  0 md    
  ├─md126p2               259:1    0 360.7G  0 md    
  └─md126p3               259:2    0 570.7G  0 md    
    └─RAIDluks            253:3    0 570.7G  0 crypt 
      ├─luksRAID-swap     253:4    0     8G  0 lvm   [SWAP]
      ├─luksRAID-swap--kali
      │                   253:5    0     8G  0 lvm   
      ├─luksRAID-var      253:6    0     8G  0 lvm   /mnt/var
      ├─luksRAID-var--kali
      │                   253:7    0     8G  0 lvm   
      ├─luksRAID-home     253:8    0   350G  0 lvm   /mnt/home
      └─luksRAID-home--kali
                          253:9    0 188.7G  0 lvm   
sr0                        11:0    1  1024M  0 rom   

and blkid:

/dev/sdb: TYPE="isw_raid_member"
/dev/sda1: UUID="A2DB-BB52" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="0ccac855-0652-4173-b6ac-37552e3183b9"
/dev/sda3: UUID="7C0037FE0037BDC8" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="30ba8682-afd7-4c97-b60b-ff1f13b8fa6d"
/dev/sda4: UUID="54C05020C0500A9E" TYPE="ntfs" PARTUUID="5b073190-9532-47bf-8f0d-60095ab62b6f"
/dev/sda5: UUID="3ffdf08d-8a55-4760-b162-bc03f1287419" TYPE="ext2" PARTUUID="7d194a3f-91db-40ea-8a21-f1910ae1a498"
/dev/sda6: UUID="87acec86-fce1-4188-bbaa-804e4f571e7b" TYPE="crypto_LUKS" PARTUUID="d61d05e2-731d-4d86-8d2a-de8aebbaf8ca"
/dev/sdc: TYPE="isw_raid_member"
/dev/loop0: TYPE="squashfs"
/dev/md126p2: UUID="ACE4257DE4254B42" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="962e1092-69c6-4663-bd49-07002dcc40ee"
/dev/md126p3: UUID="6c6a1dc9-e3de-4184-a695-7e535d78de57" TYPE="crypto_LUKS" PARTUUID="8782837a-89ed-4926-841f-d8391ad45b53"
/dev/mapper/SSDluks: UUID="zIwitb-VRLR-cHvA-67eL-0PF6-7aBm-MpthxO" TYPE="LVM2_member"
/dev/mapper/luksSSD-root: UUID="0dcd67c5-c963-4d50-acc0-22ee2a2205b9" UUID_SUB="05f6c9e0-9c9e-4b7a-8ccb-606b9db6ea21" TYPE="btrfs"
/dev/mapper/luksSSD-root--kali: UUID="35572b76-f399-469b-8687-040c36ac14cf" UUID_SUB="da95d091-263d-4bab-9b6f-b40ce1596725" TYPE="btrfs"
/dev/mapper/RAIDluks: UUID="Ejh3VP-2tDf-IJiV-EoKG-IPGG-VdCd-1xkcKn" TYPE="LVM2_member"
/dev/mapper/luksRAID-swap: UUID="6ddd84bd-8f1c-4290-b89b-ec00fe091c8e" TYPE="swap"
/dev/mapper/luksRAID-swap--kali: UUID="bd62eba5-5cd8-49fd-9c9c-41b22612974d" TYPE="swap"
/dev/mapper/luksRAID-var: UUID="8ce89764-ec2f-480d-9328-453f08278e09" UUID_SUB="880813f2-b24b-47c2-abd6-499f9f6d2ccc" TYPE="btrfs"
/dev/mapper/luksRAID-var--kali: UUID="88741a75-586b-4ccf-b9e5-f673804002a6" UUID_SUB="92dd07c9-c395-4b20-bfae-430ca9cdaf65" TYPE="btrfs"
/dev/mapper/luksRAID-home: UUID="497c4cc3-b2e3-4936-a5e6-fc19e55c6ba8" UUID_SUB="85fcf2bb-b20a-430b-bbf7-3562570970bf" TYPE="btrfs"
/dev/mapper/luksRAID-home--kali: UUID="3f5a2882-7fdb-4813-9db1-e0a182e36386" UUID_SUB="322c6392-ea4d-43e4-b42c-be30ebc4a99c" TYPE="btrfs"
/dev/sda2: PARTLABEL="Microsoft reserved partition" PARTUUID="7b32d860-30c7-4049-a935-b4024dc1dfc2"
/dev/md126: PTUUID="2bc4779b-7400-4f1e-8bf6-abb1d231b347" PTTYPE="gpt"
/dev/md126p1: PARTLABEL="Microsoft reserved partition" PARTUUID="f1d62778-c3a1-4379-91ca-9efbef05d650"

grub defaults:

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
#GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX_DEFAULT="cryptdevice=UUID=87acec86-fce1-4188-bbaa-804e4f571e7b:luksSSD cryptdevice2=UUID=6c6a1dc9-e3de-4184-a695-7e535d78de57:luksRAID root=/dev/mapper/luksSSD-root rootflags=subvol=@root"
GRYUB_ENABLE_CRYPTODISK=y
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos lvm btrfs"

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter 
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" 
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper 
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

#GRUB_SAVEDEFAULT="true"

fstab:

# 
# /etc/fstab: static file system information
#
# <file system>	<dir>	<type>	<options>	<dump>	<pass>
# UUID=0dcd67c5-c963-4d50-acc0-22ee2a2205b9
/dev/mapper/luksSSD-root	/         	btrfs     	rw,noatime,ssd,discard,space_cache,subvolid=257,subvol=/@root,subvol=@root	0 0

# UUID=497c4cc3-b2e3-4936-a5e6-fc19e55c6ba8
/dev/mapper/luksRAID-home	/home     	btrfs     	rw,relatime,space_cache,subvolid=257,subvol=/@home,subvol=@home	0 0

# UUID=8ce89764-ec2f-480d-9328-453f08278e09
/dev/mapper/luksRAID-var	/var      	btrfs     	rw,relatime,space_cache,subvolid=5,subvol=/	0 0

# UUID=3ffdf08d-8a55-4760-b162-bc03f1287419
/dev/sda5           	/boot     	ext2      	rw,noatime,ssd,discard,block_validity,barrier,user_xattr,acl	0 2

# UUID=A2DB-BB52
/dev/sda1           	/boot/efi 	vfat      	rw,noatime,ssd,discard,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro	0 2

# UUID=6ddd84bd-8f1c-4290-b89b-ec00fe091c8e
/dev/mapper/luksRAID-swap	none      	swap      	defaults  	0 0

mkinitcpio:

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES=""

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect block filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev block filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev block mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev block lvm2 filesystems"
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block encrypt encrypt2 lvm2 filesystems keyboard fsck btrfs"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

and history of install commands:

lsblk
cryptsetup -v --key-size 512 luksFormat /dev/sda6
cryptsetup -v --key-size 512 luksFormat /dev/md126p3
cryptsetup open --type luks /dev/sda6 SSDluks
cryptsetup open --type luks /dev/md126p3 RAIDluks
pvcreate /dev/mapper/SSDluks
pvcreate /dev/mapper/RAIDluks
vgcreate luksSSD /dev/mapper/SSDluks 
vgcreate luksRAID /dev/mapper/RAIDluks 
vgdisplay 
lvcreate -L 46G luksSSD -n root
lvcreate -l 100%FREE luksSSD -n root-kali
lvcreate -L 8G luksRAID -n swap
lvcreate -L 8G luksRAID -n swap-kali
lvcreate -L 8G luksRAID -n var
lvcreate -L 8G luksRAID -n var-kali
lvcreate -L 350G luksRAID -n home
lvcreate -l 100%FREE luksRAID -n home-kali
vgdisplay
mkfs.btrfs /dev/mapper/luksSSD-root
mkfs.btrfs /dev/mapper/luksSSD-root--kali 
mkfs.btrfs /dev/mapper/luksRAID-var
mkfs.btrfs /dev/mapper/luksRAID-var--kali 
mkfs.btrfs /dev/mapper/luksRAID-home
mkfs.btrfs /dev/mapper/luksRAID-home--kali 
mkswap /dev/mapper/luksRAID-swap
mkswap /dev/mapper/luksRAID-swap--kali 
*for ssh 
passwd
systemctl start sshd.service
wifi-menu
ifconfig
*connect via ssh
swapon /dev/mapper/luksRAID-swap
ls /mnt
mount /dev/mapper/luksSSD-root /mnt
btrfs subvolume create /mnt/@root
umount /mnt
mount -o noatime,discard,ssd,defaults,subvol=@root /dev/mapper/luksSSD-root /mnt
mount /dev/mapper/luksRAID-home /mnt/home
btrfs subvolume create /mnt/home/@home
umount /mnt/home/
ls /mnt/
mount -o subvol=@home /dev/mapper/luksRAID-home /mnt/home
mount /dev/mapper/luksRAID-var /mnt/var
mount /dev/sda5 /mnt/boot
mkdir /mnt/boot/efi
mount /dev/sda1 /mnt/boot/efi
pacstrap /mnt base base-devel nano btrfs-progs openssh wpa_supplicant dialog
genfstab -p /mnt >> /mnt/etc/fstab
nano /mnt/etc/fstab 
nano /mnt/etc/lvm/lvm.conf
nano /mnt/etc/crypttab
pacman -S grub
ls /usr/share/zoneinfo/Europe/
ls /usr/share/zoneinfo/Europe/Warsaw 
ln -s /usr/share/zoneinfo/Europe/Warsaw 
hwclock --systohc --utc
ln -s /usr/share/zoneinfo/Europe/Warsaw /etc/localtime 
locale-gen
pacman -S os-prober
pacman -S ttf-dejavu wget net-tools networkmanager network-manager-applet freetype2
pacman -S efibootmgr
grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub
mkinitcpio -p linux
grub-mkconfig -o /boot/grub/grub.cfg
grub-mkconfig -o /boot/efi/EFI/grub/grub.cfg
passwd
useradd -m -g users -G audio,disk,network,optical,power,storage,video,rfkill,wheel -s /bin/bash skawikk
passwd skawikk
pacman -S xorg-server xf86-input-evdev xf86-input-mouse xf86-input-keyboard xf86-video-vesa xorg-xinit mesa linux-headers gnome nvidia
pacman -S alsa-firmware alsa-lib alsa-plugins alsa-utils pulseaudio pulseaudio-alsa libcanberra libcanberra-pulse
pacman -S zip unzip unrar guake fish
pacman -R gnome-terminal
pacman -S bash-completion openssh zsh sudo dhclient xorg alsa-{plugins,utils,firmware} pulseaudio pulseaudio-{equalizer,alsa,gconf} nvidia-utils nvidia-settings xorg-server-devel opencl-nvidia
pacman -S yaourt
pacman -S rsync
pacman -S customizepkg
pacman -S gdm
systemctl enable gdm
history
exit

Offline

#2 2017-08-19 18:26:50

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,

anyone, anything...?

If that matters, i'm using hardware raid on asus z170 motherboard (intel).

M.

Offline

#3 2017-08-19 20:56:01

edacval
Member
From: .LT
Registered: 2008-10-23
Posts: 89

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

skawikk wrote:

grub defaults:

GRYUB_ENABLE_CRYPTODISK=y

Is this not a syntax error?

Offline

#4 2017-08-20 21:59:31

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,

It's not about that;/

Still the same.

M.

Offline

#5 2017-09-07 21:43:20

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,
Sorry about post after post, but I still have the same issue.
Any help?

Offline

#6 2017-09-08 03:59:07

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,739

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Three strikes, and you are out
https://wiki.archlinux.org/index.php/Co … ct#Bumping
I suspect without proof that it remains an Antergos problem.
https://wiki.archlinux.org/index.php/Co … .2Aonly.2A

Closed.  Dust binned.


Edit: Reopened on appeal.  OP is trying to install a pure Arch system.

Last edited by ewaller (2017-09-08 15:49:34)


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#7 2017-09-12 13:24:31

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi guys, i tried many times to run system.
Arch installed without luks and lvm works great, but on luks freezeing.

How can i go to kernel log or startup log from my system? I tried from chroot, but /var/log is empty, and kernel log is only from chroot-host environment.

This is my config now (mkinitcpio and grub)

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="cryptdevice=UUID=5729c1bc-e401-49c4-8fe3-3e632004b2cc:luksSSD-root:allow$
GRUB_CMDLINE_LINUX=""
GRUB_ENABLE_CRYPTODISK=y

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos lvm"

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

#GRUB_SAVEDEFAULT="true"
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES=""

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES="/sbin/mdmon"

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect block filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev block filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev block mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev block lvm2 filesystems"
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS="base udev autodetect keyboard keymap modconf block mdadm_udev encrypt encrypt2 filesystems"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

I wan't to try with systemd boot loader, but i can't figure out how to run two encrypt devices.

M.

Offline

#8 2017-09-12 19:22:14

gym
Member
Registered: 2016-06-27
Posts: 13

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,

First of all I assume before the pacman -S grub command you have executed arch-chroot /mnt /bin/bash and it is just missing from your command history. If this is not the case you might have only installed grub in the live system.

I am not an expert on this topic but I would start by going back to something simpler, like booting into the root partition and getting rid of the rest of mounts from fstab. Once that works you can add the rest of it. the following line in your grub defaults looks wrong to me:

GRUB_CMDLINE_LINUX_DEFAULT="cryptdevice=UUID=5729c1bc-e401-49c4-8fe3-3e632004b2cc:luksSSD-root:allow$

I think it should only contain the lvm pool name which should be luksSSD for you, instead of luksSSD-root. Also I don't see where the UUID is coming from that you are using right know but it should be the UUID of /dev/sda6 I think. Can you try to override the boot command line to the following:

cryptdevice=/dev/sda6:luksSSD root=/dev/mapper/luksSSD-root

And see if it makes any difference?

Cheers,
Gym

Offline

#9 2017-09-12 19:31:08

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi, i replaced that in grub, also i was change Disable UUID to TRUE and remove encrypt2 hook from mkinitcpio.
but still freeze after:
Loading Linux...
Loading initial ramdisk...
everything stucks.

/// yes;) chroot is missing in command history.

Offline

#10 2017-09-13 18:22:26

gym
Member
Registered: 2016-06-27
Posts: 13

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Can you post the content of your /boot/grub/grub.cfg?
Do you have your initramfs-linux.img under /boot?
Grub might be looking for the initramfs at the wrong place or it might be missing.

What happens if you try to boot the fallback image?

Offline

#11 2017-09-13 18:27:25

gym
Member
Registered: 2016-06-27
Posts: 13

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

You can also try adding "debug" to the kernel boot command line so you might see more output.

Offline

#12 2017-09-14 06:09:09

skawikk
Member
Registered: 2017-05-23
Posts: 29

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

Hi,

i added debug to kernell boot command, bud nothing else happen than freeze.

i have linux.img under /boot, tried even copy under boot/efi and boot/efi/;)

[root@archiso /]# ls /boot/
efi  grub  initramfs-linux-fallback.img  initramfs-linux.img  initramfs-linux-lts-fallback.img	initramfs-linux-lts.img  lost+found  vmlinuz-linux  vmlinuz-linux-lts

here's my grub.cfg:

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
insmod lvm
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod cryptodisk
insmod luks
insmod gcry_rijndael
insmod gcry_rijndael
insmod gcry_sha256
insmod lvm
insmod btrfs
cryptomount -u 5729c1bce40149c48fe33e632004b2cc
set root='lvmid/1cKn4s-Icfs-SV4l-mLUh-B0nA-fA3n-HTBMTV/VruU1n-WbE4-bMai-e7nK-ECOA-r73F-SRdCCT'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint='lvmid/1cKn4s-Icfs-SV4l-mLUh-B0nA-fA3n-HTBMTV/VruU1n-WbE4-bMai-e7nK-ECOA-r73F-SRdCCT'  1cf400ad-36c2-436a-adc2-f7c336a01414
else
  search --no-floppy --fs-uuid --set=root 1cf400ad-36c2-436a-adc2-f7c336a01414
fi
    font="/@root/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1cf400ad-36c2-436a-adc2-f7c336a01414' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  cf22be9a-9349-4158-a471-7964cc412bd4
	else
	  search --no-floppy --fs-uuid --set=root cf22be9a-9349-4158-a471-7964cc412bd4
	fi
	echo	'Loading Linux linux-lts ...'
	linux	/vmlinuz-linux-lts root=/dev/mapper/luksSSD-root rw rootflags=subvol=@root  cryptdevice=/dev/sda6:luksSSD:allow-discards root=/dev/mapper/luksSSD-root
	echo	'Loading initial ramdisk ...'
	initrd  /initramfs-linux-lts.img
}
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-1cf400ad-36c2-436a-adc2-f7c336a01414' {
	menuentry 'Arch Linux, with Linux linux-lts' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-advanced-1cf400ad-36c2-436a-adc2-f7c336a01414' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  cf22be9a-9349-4158-a471-7964cc412bd4
		else
		  search --no-floppy --fs-uuid --set=root cf22be9a-9349-4158-a471-7964cc412bd4
		fi
		echo	'Loading Linux linux-lts ...'
		linux	/vmlinuz-linux-lts root=/dev/mapper/luksSSD-root rw rootflags=subvol=@root  cryptdevice=/dev/sda6:luksSSD:allow-discards root=/dev/mapper/luksSSD-root
		echo	'Loading initial ramdisk ...'
		initrd  /initramfs-linux-lts.img
	}
	menuentry 'Arch Linux, with Linux linux-lts (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-fallback-1cf400ad-36c2-436a-adc2-f7c336a01414' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  cf22be9a-9349-4158-a471-7964cc412bd4
		else
		  search --no-floppy --fs-uuid --set=root cf22be9a-9349-4158-a471-7964cc412bd4
		fi
		echo	'Loading Linux linux-lts ...'
		linux	/vmlinuz-linux-lts root=/dev/mapper/luksSSD-root rw rootflags=subvol=@root  cryptdevice=/dev/sda6:luksSSD:allow-discards root=/dev/mapper/luksSSD-root
		echo	'Loading initial ramdisk ...'
		initrd  /initramfs-linux-lts-fallback.img
	}
	menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-1cf400ad-36c2-436a-adc2-f7c336a01414' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  cf22be9a-9349-4158-a471-7964cc412bd4
		else
		  search --no-floppy --fs-uuid --set=root cf22be9a-9349-4158-a471-7964cc412bd4
		fi
		echo	'Loading Linux linux ...'
		linux	/vmlinuz-linux root=/dev/mapper/luksSSD-root rw rootflags=subvol=@root  cryptdevice=/dev/sda6:luksSSD:allow-discards root=/dev/mapper/luksSSD-root
		echo	'Loading initial ramdisk ...'
		initrd  /initramfs-linux.img
	}
	menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-1cf400ad-36c2-436a-adc2-f7c336a01414' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  cf22be9a-9349-4158-a471-7964cc412bd4
		else
		  search --no-floppy --fs-uuid --set=root cf22be9a-9349-4158-a471-7964cc412bd4
		fi
		echo	'Loading Linux linux ...'
		linux	/vmlinuz-linux root=/dev/mapper/luksSSD-root rw rootflags=subvol=@root  cryptdevice=/dev/sda6:luksSSD:allow-discards root=/dev/mapper/luksSSD-root
		echo	'Loading initial ramdisk ...'
		initrd  /initramfs-linux-fallback.img
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

Offline

#13 2017-09-14 17:32:50

gym
Member
Registered: 2016-06-27
Posts: 13

Re: SSD + RAID1 lvm on luks BTRFS multiboot problem

After the computer freezes, do you still see the error message or the screen goes completely blank?
Also, you can try to boot manually from the grub cmd to see if the ramdisk is found. You can try something like:

grub> set root=(hd0,5) # or (hd0, gpt5)
grub> linux /vmlinuz-linux
grub> initrd /<TAB>

This should list all the available images.

Offline

Board footer

Powered by FluxBB