You are not logged in.

Pages: 1

#1 2017-09-16 23:19:18

zindabad
Member
Registered: 2017-09-15
Posts: 13

[SOLVED] Xorg/KDE installation problem

I'm trying to install Xorg but am running into what seems to be a driver-related issue. My log file from running startx is as follows:

[   131.644] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[   131.646] X Protocol Version 11, Revision 0
[   131.646] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[   131.647] Current Operating System: Linux infectedghost 4.12.13-1-ARCH #1 SMP PREEMPT Fri Sep 15 06:36:43 UTC 2017 x86_64
[   131.647] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=74241254-ed52-4274-90c8-2e1551898163
[   131.648] Build Date: 13 August 2017  09:37:50PM
[   131.649]  
[   131.650] Current version of pixman: 0.34.0
[   131.651] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   131.651] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   131.654] (==) Log file: "/home/zindabad/.local/share/xorg/Xorg.0.log", Time: Sat Sep 16 18:46:11 2017
[   131.655] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   131.656] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   131.656] (==) No Layout section.  Using the first Screen section.
[   131.656] (==) No screen section available. Using defaults.
[   131.656] (**) |-->Screen "Default Screen Section" (0)
[   131.656] (**) |   |-->Monitor "<default monitor>"
[   131.656] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   131.656] (**) |   |-->Device "Intel Graphics"
[   131.656] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   131.656] (==) Automatically adding devices
[   131.656] (==) Automatically enabling devices
[   131.656] (==) Automatically adding GPU devices
[   131.656] (==) Automatically binding GPU devices
[   131.656] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   131.656] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   131.656] 	Entry deleted from font path.
[   131.656] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   131.656] 	Entry deleted from font path.
[   131.656] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   131.656] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   131.656] 	Entry deleted from font path.
[   131.656] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   131.656] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   131.656] (==) ModulePath set to "/usr/lib/xorg/modules"
[   131.656] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   131.656] (II) Loader magic: 0x55858c523d40
[   131.656] (II) Module ABI versions:
[   131.656] 	X.Org ANSI C Emulation: 0.4
[   131.656] 	X.Org Video Driver: 23.0
[   131.656] 	X.Org XInput driver : 24.1
[   131.656] 	X.Org Server Extension : 10.0
[   131.657] (++) using VT number 1

[   131.657] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   131.658] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   131.659] (II) xfree86: Adding drm device (/dev/dri/card0)
[   131.659] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   131.661] (--) PCI:*(0:0:2:0) 8086:5916:1028:075b rev 2, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   131.661] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   131.661] (II) LoadModule: "glx"
[   131.661] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   131.662] (II) Module glx: vendor="X.Org Foundation"
[   131.662] 	compiled for 1.19.3, module version = 1.0.0
[   131.662] 	ABI class: X.Org Server Extension, version 10.0
[   131.662] (II) LoadModule: "intel"
[   131.662] (WW) Warning, couldn't open module intel
[   131.662] (II) UnloadModule: "intel"
[   131.662] (II) Unloading intel
[   131.662] (EE) Failed to load module "intel" (module does not exist, 0)
[   131.662] (EE) No drivers available.
[   131.662] (EE) 
Fatal server error:
[   131.662] (EE) no screens found(EE) 
[   131.662] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   131.662] (EE) Please also check the log file at "/home/zindabad/.local/share/xorg/Xorg.0.log" for additional information.
[   131.662] (EE) 
[   131.705] (EE) Server terminated with error (1). Closing log file.

lspci -Q gives me this:

$ lspci -Q | grep VGA
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)

So far I have installed the mesa package and created a 20-intel.conf file in /etc/X11/xorg.conf.d. I have tried deleting the .conf file but received the same error. Any diagnostic and troubleshooting advice would be much appreciated.

Last edited by zindabad (2017-09-17 07:20:07)

Offline

#2 2017-09-16 23:22:25

dockland
Member
From: Sweden
Registered: 2015-06-06
Posts: 861

Re: [SOLVED] Xorg/KDE installation problem

What did you install, and how?

I saw your info now, sorry for the buzz.

Last edited by dockland (2017-09-16 23:41:44)

I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.

Offline

#3 2017-09-16 23:30:29

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,729

Re: [SOLVED] Xorg/KDE installation problem

There's no way the error was the same without the conf file.

Offline

#4 2017-09-16 23:51:34

zindabad
Member
Registered: 2017-09-15
Posts: 13

Re: [SOLVED] Xorg/KDE installation problem

Sorry, I should have included that as well. Here is the log after I remove the .conf:

spacepaste

new
Paste details
reply | raw | toggle line wrapping
 
[  1979.404] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[  1979.408] X Protocol Version 11, Revision 0
[  1979.409] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[  1979.410] Current Operating System: Linux infectedghost 4.12.13-1-ARCH #1 SMP PREEMPT Fri Sep 15 06:36:43 UTC 2017 x86_64
[  1979.410] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=74241254-ed52-4274-90c8-2e1551898163
[  1979.413] Build Date: 13 August 2017  09:37:50PM
[  1979.414]  
[  1979.415] Current version of pixman: 0.34.0
[  1979.417] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[  1979.417] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1979.422] (==) Log file: "/home/zindabad/.local/share/xorg/Xorg.0.log", Time: Sat Sep 16 19:16:59 2017
[  1979.424] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1979.424] (==) No Layout section.  Using the first Screen section.
[  1979.424] (==) No screen section available. Using defaults.
[  1979.424] (**) |-->Screen "Default Screen Section" (0)
[  1979.424] (**) |   |-->Monitor "<default monitor>"
[  1979.424] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1979.424] (==) Automatically adding devices
[  1979.424] (==) Automatically enabling devices
[  1979.424] (==) Automatically adding GPU devices
[  1979.424] (==) Automatically binding GPU devices
[  1979.424] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1979.424] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1979.424] 	Entry deleted from font path.
[  1979.424] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1979.424] 	Entry deleted from font path.
[  1979.424] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1979.424] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1979.424] 	Entry deleted from font path.
[  1979.424] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1979.424] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[  1979.424] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1979.424] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1979.424] (II) Loader magic: 0x560be00e3d40
[  1979.424] (II) Module ABI versions:
[  1979.424] 	X.Org ANSI C Emulation: 0.4
[  1979.424] 	X.Org Video Driver: 23.0
[  1979.424] 	X.Org XInput driver : 24.1
[  1979.424] 	X.Org Server Extension : 10.0
[  1979.424] (++) using VT number 1

[  1979.424] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1979.425] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  1979.425] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1979.426] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[  1979.427] (--) PCI:*(0:0:2:0) 8086:5916:1028:075b rev 2, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  1979.427] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1979.427] (II) LoadModule: "glx"
[  1979.427] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1979.428] (II) Module glx: vendor="X.Org Foundation"
[  1979.428] 	compiled for 1.19.3, module version = 1.0.0
[  1979.428] 	ABI class: X.Org Server Extension, version 10.0
[  1979.428] (==) Matched intel as autoconfigured driver 0
[  1979.428] (==) Matched intel as autoconfigured driver 1
[  1979.428] (==) Matched modesetting as autoconfigured driver 2
[  1979.428] (==) Matched fbdev as autoconfigured driver 3
[  1979.428] (==) Matched vesa as autoconfigured driver 4
[  1979.428] (==) Assigned the driver to the xf86ConfigLayout
[  1979.428] (II) LoadModule: "intel"
[  1979.428] (WW) Warning, couldn't open module intel
[  1979.428] (II) UnloadModule: "intel"
[  1979.428] (II) Unloading intel
[  1979.428] (EE) Failed to load module "intel" (module does not exist, 0)
[  1979.428] (II) LoadModule: "modesetting"
[  1979.428] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1979.429] (II) Module modesetting: vendor="X.Org Foundation"
[  1979.429] 	compiled for 1.19.3, module version = 1.19.3
[  1979.429] 	Module class: X.Org Video Driver
[  1979.429] 	ABI class: X.Org Video Driver, version 23.0
[  1979.429] (II) LoadModule: "fbdev"
[  1979.429] (WW) Warning, couldn't open module fbdev
[  1979.429] (II) UnloadModule: "fbdev"
[  1979.429] (II) Unloading fbdev
[  1979.429] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1979.429] (II) LoadModule: "vesa"
[  1979.429] (WW) Warning, couldn't open module vesa
[  1979.429] (II) UnloadModule: "vesa"
[  1979.429] (II) Unloading vesa
[  1979.429] (EE) Failed to load module "vesa" (module does not exist, 0)
[  1979.429] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1979.429] (II) modeset(0): using drv /dev/dri/card0
[  1979.429] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  1979.429] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1979.429] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  1979.429] (==) modeset(0): RGB weight 888
[  1979.429] (==) modeset(0): Default visual is TrueColor
[  1979.429] (II) Loading sub module "glamoregl"
[  1979.429] (II) LoadModule: "glamoregl"
[  1979.429] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  1979.433] (II) Module glamoregl: vendor="X.Org Foundation"
[  1979.433] 	compiled for 1.19.3, module version = 1.0.0
[  1979.433] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1979.433] (II) glamor: OpenGL accelerated X.org driver based.
[  1979.453] (II) glamor: EGL version 1.4 (DRI2):
[  1979.464] (II) modeset(0): glamor initialized
[  1979.465] (II) modeset(0): Output eDP-1 has no monitor section
[  1979.466] (II) modeset(0): Output DP-1 has no monitor section
[  1979.475] (II) modeset(0): Output HDMI-1 has no monitor section
[  1979.477] (II) modeset(0): Output DP-2 has no monitor section
[  1979.486] (II) modeset(0): Output HDMI-2 has no monitor section
[  1979.488] (II) modeset(0): EDID for output eDP-1
[  1979.488] (II) modeset(0): Manufacturer: SHP  Model: 1449  Serial#: 0
[  1979.488] (II) modeset(0): Year: 2015  Week: 32
[  1979.488] (II) modeset(0): EDID Version: 1.4
[  1979.488] (II) modeset(0): Digital Display Input
[  1979.488] (II) modeset(0): 8 bits per channel
[  1979.488] (II) modeset(0): Digital interface is DisplayPort
[  1979.488] (II) modeset(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[  1979.488] (II) modeset(0): Gamma: 2.20
[  1979.488] (II) modeset(0): No DPMS capabilities specified
[  1979.488] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1979.488] (II) modeset(0): Default color space is primary color space
[  1979.488] (II) modeset(0): First detailed timing is preferred mode
[  1979.488] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  1979.488] (II) modeset(0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
[  1979.488] (II) modeset(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[  1979.488] (II) modeset(0): Manufacturer's mask: 0
[  1979.488] (II) modeset(0): Supported detailed timing:
[  1979.488] (II) modeset(0): clock: 138.5 MHz   Image Size:  294 x 165 mm
[  1979.488] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[  1979.488] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[  1979.488] (II) modeset(0):  DJCP6LQ133M1
[  1979.488] (II) modeset(0): Unknown vendor-specific block 0
[  1979.488] (II) modeset(0): EDID (in hex):
[  1979.488] (II) modeset(0): 	00ffffffffffff004d10491400000000
[  1979.488] (II) modeset(0): 	20190104a51d11780ede50a3544c9926
[  1979.488] (II) modeset(0): 	0f505400000001010101010101010101
[  1979.488] (II) modeset(0): 	0101010101011a3680a070381f403020
[  1979.488] (II) modeset(0): 	350026a5100000180000001000000000
[  1979.488] (II) modeset(0): 	00000000000000000000000000fe0044
[  1979.488] (II) modeset(0): 	4a435036804c513133334d3100000000
[  1979.488] (II) modeset(0): 	0002410328001200000b010a20200066
[  1979.488] (II) modeset(0): Printing probed modes for output eDP-1
[  1979.488] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  1979.488] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  1979.488] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  1979.488] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  1979.488] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  1979.488] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  1979.488] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1979.488] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1979.488] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  1979.488] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  1979.488] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1979.488] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  1979.488] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  1979.488] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  1979.488] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  1979.490] (II) modeset(0): EDID for output DP-1
[  1979.499] (II) modeset(0): EDID for output HDMI-1
[  1979.502] (II) modeset(0): EDID for output DP-2
[  1979.511] (II) modeset(0): EDID for output HDMI-2
[  1979.511] (II) modeset(0): Output eDP-1 connected
[  1979.511] (II) modeset(0): Output DP-1 disconnected
[  1979.511] (II) modeset(0): Output HDMI-1 disconnected
[  1979.511] (II) modeset(0): Output DP-2 disconnected
[  1979.511] (II) modeset(0): Output HDMI-2 disconnected
[  1979.511] (II) modeset(0): Using exact sizes for initial modes
[  1979.511] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[  1979.511] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  1979.511] (==) modeset(0): DPI set to (96, 96)
[  1979.511] (II) Loading sub module "fb"
[  1979.511] (II) LoadModule: "fb"
[  1979.511] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1979.512] (II) Module fb: vendor="X.Org Foundation"
[  1979.512] 	compiled for 1.19.3, module version = 1.0.0
[  1979.512] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1979.512] (==) Depth 24 pixmap format is 32 bpp
[  1979.594] (==) modeset(0): Backing store enabled
[  1979.594] (==) modeset(0): Silken mouse enabled
[  1979.594] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1979.595] (==) modeset(0): DPMS enabled
[  1979.595] (II) modeset(0): [DRI2] Setup complete
[  1979.595] (II) modeset(0): [DRI2]   DRI driver: i965
[  1979.595] (II) modeset(0): [DRI2]   VDPAU driver: i965
[  1979.595] (--) RandR disabled
[  1979.600] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1979.600] (II) AIGLX: enabled GLX_ARB_create_context
[  1979.600] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1979.600] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  1979.600] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1979.600] (II) AIGLX: enabled GLX_SGI_swap_control
[  1979.600] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1979.600] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1979.600] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  1979.600] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1979.600] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1979.601] (II) AIGLX: Loaded and initialized i965
[  1979.601] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1979.603] (II) modeset(0): Damage tracking initialized
[  1979.603] (II) modeset(0): Setting screen physical size to 508 x 285
[  1979.634] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[  1979.634] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1979.634] (II) LoadModule: "libinput"
[  1979.634] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1979.637] (II) Module libinput: vendor="X.Org Foundation"
[  1979.637] 	compiled for 1.19.3, module version = 0.26.0
[  1979.637] 	Module class: X.Org XInput Driver
[  1979.637] 	ABI class: X.Org XInput driver, version 24.1
[  1979.637] (II) Using input driver 'libinput' for 'Power Button'
[  1979.638] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 20 paused 0
[  1979.638] (**) Power Button: always reports core events
[  1979.638] (**) Option "Device" "/dev/input/event7"
[  1979.638] (**) Option "_source" "server/udev"
[  1979.638] (II) event7  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1979.638] (II) event7  - (II) Power Button: (II) device is a keyboard
[  1979.638] (II) event7  - (II) Power Button: (II) device removed
[  1979.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[  1979.638] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1979.638] (II) event7  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1979.638] (II) event7  - (II) Power Button: (II) device is a keyboard
[  1979.639] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[  1979.639] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1979.639] (II) Using input driver 'libinput' for 'Video Bus'
[  1979.639] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 23 paused 0
[  1979.639] (**) Video Bus: always reports core events
[  1979.639] (**) Option "Device" "/dev/input/event9"
[  1979.639] (**) Option "_source" "server/udev"
[  1979.639] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1979.639] (II) event9  - (II) Video Bus: (II) device is a keyboard
[  1979.639] (II) event9  - (II) Video Bus: (II) device removed
[  1979.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[  1979.639] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1979.640] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1979.640] (II) event9  - (II) Video Bus: (II) device is a keyboard
[  1979.640] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[  1979.640] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1979.640] (II) Using input driver 'libinput' for 'Power Button'
[  1979.640] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 24 paused 0
[  1979.640] (**) Power Button: always reports core events
[  1979.640] (**) Option "Device" "/dev/input/event5"
[  1979.640] (**) Option "_source" "server/udev"
[  1979.640] (II) event5  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1979.640] (II) event5  - (II) Power Button: (II) device is a keyboard
[  1979.640] (II) event5  - (II) Power Button: (II) device removed
[  1979.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[  1979.640] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1979.641] (II) event5  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1979.641] (II) event5  - (II) Power Button: (II) device is a keyboard
[  1979.641] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[  1979.641] (II) No input driver specified, ignoring this device.
[  1979.641] (II) This device may have been added with another device file.
[  1979.641] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[  1979.641] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1979.641] (II) Using input driver 'libinput' for 'Sleep Button'
[  1979.642] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 25 paused 0
[  1979.642] (**) Sleep Button: always reports core events
[  1979.642] (**) Option "Device" "/dev/input/event6"
[  1979.642] (**) Option "_source" "server/udev"
[  1979.642] (II) event6  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1979.642] (II) event6  - (II) Sleep Button: (II) device is a keyboard
[  1979.642] (II) event6  - (II) Sleep Button: (II) device removed
[  1979.642] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
[  1979.642] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  1979.642] (II) event6  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1979.642] (II) event6  - (II) Sleep Button: (II) device is a keyboard
[  1979.642] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event11)
[  1979.642] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[  1979.642] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[  1979.643] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 26 paused 0
[  1979.643] (**) Integrated_Webcam_HD: always reports core events
[  1979.643] (**) Option "Device" "/dev/input/event11"
[  1979.643] (**) Option "_source" "server/udev"
[  1979.643] (II) event11 - (II) Integrated_Webcam_HD: (II) is tagged by udev as: Keyboard
[  1979.643] (II) event11 - (II) Integrated_Webcam_HD: (II) device is a keyboard
[  1979.643] (II) event11 - (II) Integrated_Webcam_HD: (II) device removed
[  1979.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11"
[  1979.643] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[  1979.643] (II) event11 - (II) Integrated_Webcam_HD: (II) is tagged by udev as: Keyboard
[  1979.643] (II) event11 - (II) Integrated_Webcam_HD: (II) device is a keyboard
[  1979.644] (II) config/udev: Adding input device DLL075B:01 06CB:76AF Touchpad (/dev/input/event19)
[  1979.644] (**) DLL075B:01 06CB:76AF Touchpad: Applying InputClass "libinput touchpad catchall"
[  1979.644] (II) Using input driver 'libinput' for 'DLL075B:01 06CB:76AF Touchpad'
[  1979.751] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 27 paused 0
[  1979.751] (**) DLL075B:01 06CB:76AF Touchpad: always reports core events
[  1979.751] (**) Option "Device" "/dev/input/event19"
[  1979.751] (**) Option "_source" "server/udev"
[  1979.752] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) is tagged by udev as: Touchpad
[  1979.752] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) device is a touchpad
[  1979.752] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) device removed
[  1979.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input22/event19"
[  1979.752] (II) XINPUT: Adding extended input device "DLL075B:01 06CB:76AF Touchpad" (type: TOUCHPAD, id 11)
[  1979.752] (**) Option "AccelerationScheme" "none"
[  1979.752] (**) DLL075B:01 06CB:76AF Touchpad: (accel) selected scheme none/0
[  1979.752] (**) DLL075B:01 06CB:76AF Touchpad: (accel) acceleration factor: 2.000
[  1979.752] (**) DLL075B:01 06CB:76AF Touchpad: (accel) acceleration threshold: 4
[  1979.753] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) is tagged by udev as: Touchpad
[  1979.753] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) device is a touchpad
[  1979.754] (II) config/udev: Adding input device DLL075B:01 06CB:76AF Touchpad (/dev/input/mouse0)
[  1979.754] (II) No input driver specified, ignoring this device.
[  1979.754] (II) This device may have been added with another device file.
[  1979.754] (II) config/udev: Adding input device Intel Virtual Button driver (/dev/input/event3)
[  1979.754] (**) Intel Virtual Button driver: Applying InputClass "libinput keyboard catchall"
[  1979.754] (II) Using input driver 'libinput' for 'Intel Virtual Button driver'
[  1979.755] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[  1979.755] (**) Intel Virtual Button driver: always reports core events
[  1979.755] (**) Option "Device" "/dev/input/event3"
[  1979.755] (**) Option "_source" "server/udev"
[  1979.756] (II) event3  - (II) Intel Virtual Button driver: (II) is tagged by udev as: Keyboard
[  1979.756] (II) event3  - (II) Intel Virtual Button driver: (II) device is a keyboard
[  1979.756] (II) event3  - (II) Intel Virtual Button driver: (II) device removed
[  1979.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input4/event3"
[  1979.756] (II) XINPUT: Adding extended input device "Intel Virtual Button driver" (type: KEYBOARD, id 12)
[  1979.757] (II) event3  - (II) Intel Virtual Button driver: (II) is tagged by udev as: Keyboard
[  1979.757] (II) event3  - (II) Intel Virtual Button driver: (II) device is a keyboard
[  1979.758] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[  1979.758] (II) No input driver specified, ignoring this device.
[  1979.758] (II) This device may have been added with another device file.
[  1979.758] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event13)
[  1979.758] (II) No input driver specified, ignoring this device.
[  1979.758] (II) This device may have been added with another device file.
[  1979.759] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[  1979.759] (II) No input driver specified, ignoring this device.
[  1979.759] (II) This device may have been added with another device file.
[  1979.759] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[  1979.759] (II) No input driver specified, ignoring this device.
[  1979.759] (II) This device may have been added with another device file.
[  1979.760] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[  1979.760] (II) No input driver specified, ignoring this device.
[  1979.760] (II) This device may have been added with another device file.
[  1979.760] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[  1979.760] (II) No input driver specified, ignoring this device.
[  1979.760] (II) This device may have been added with another device file.
[  1979.761] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event18)
[  1979.761] (II) No input driver specified, ignoring this device.
[  1979.761] (II) This device may have been added with another device file.
[  1979.761] (II) config/udev: Adding input device Intel HID events (/dev/input/event1)
[  1979.761] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[  1979.761] (II) Using input driver 'libinput' for 'Intel HID events'
[  1979.762] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[  1979.763] (**) Intel HID events: always reports core events
[  1979.763] (**) Option "Device" "/dev/input/event1"
[  1979.763] (**) Option "_source" "server/udev"
[  1979.763] (II) event1  - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[  1979.763] (II) event1  - (II) Intel HID events: (II) device is a keyboard
[  1979.763] (II) event1  - (II) Intel HID events: (II) device removed
[  1979.763] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input2/event1"
[  1979.763] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[  1979.764] (II) event1  - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[  1979.764] (II) event1  - (II) Intel HID events: (II) device is a keyboard
[  1979.765] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event2)
[  1979.765] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[  1979.765] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[  1979.766] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[  1979.766] (**) Intel HID 5 button array: always reports core events
[  1979.766] (**) Option "Device" "/dev/input/event2"
[  1979.766] (**) Option "_source" "server/udev"
[  1979.767] (II) event2  - (II) Intel HID 5 button array: (II) is tagged by udev as: Keyboard Switch
[  1979.767] (II) event2  - (II) Intel HID 5 button array: (II) device is a keyboard
[  1979.767] (II) event2  - (II) Intel HID 5 button array: (II) device removed
[  1979.767] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input3/event2"
[  1979.767] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 14)
[  1979.768] (II) event2  - (II) Intel HID 5 button array: (II) is tagged by udev as: Keyboard Switch
[  1979.768] (II) event2  - (II) Intel HID 5 button array: (II) device is a keyboard
[  1979.769] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1979.769] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1979.769] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1979.770] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[  1979.770] (**) AT Translated Set 2 keyboard: always reports core events
[  1979.770] (**) Option "Device" "/dev/input/event0"
[  1979.770] (**) Option "_source" "server/udev"
[  1979.771] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1979.771] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1979.771] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1979.771] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1979.771] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[  1979.772] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1979.772] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1979.773] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event20)
[  1979.773] (**) PS/2 Synaptics TouchPad: Applying InputClass "libinput pointer catchall"
[  1979.773] (II) Using input driver 'libinput' for 'PS/2 Synaptics TouchPad'
[  1979.774] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 32 paused 0
[  1979.774] (**) PS/2 Synaptics TouchPad: always reports core events
[  1979.774] (**) Option "Device" "/dev/input/event20"
[  1979.774] (**) Option "_source" "server/udev"
[  1979.775] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) is tagged by udev as: Mouse
[  1979.775] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) device is a pointer
[  1979.775] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) device removed
[  1979.775] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event20"
[  1979.775] (II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: MOUSE, id 16)
[  1979.775] (**) Option "AccelerationScheme" "none"
[  1979.775] (**) PS/2 Synaptics TouchPad: (accel) selected scheme none/0
[  1979.775] (**) PS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1979.775] (**) PS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1979.776] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) is tagged by udev as: Mouse
[  1979.776] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) device is a pointer
[  1979.776] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse1)
[  1979.776] (II) No input driver specified, ignoring this device.
[  1979.776] (II) This device may have been added with another device file.
[  1979.777] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  1979.777] (II) No input driver specified, ignoring this device.
[  1979.777] (II) This device may have been added with another device file.
[  1979.777] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[  1979.778] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1979.778] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[  1979.779] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 33 paused 0
[  1979.779] (**) Dell WMI hotkeys: always reports core events
[  1979.779] (**) Option "Device" "/dev/input/event10"
[  1979.779] (**) Option "_source" "server/udev"
[  1979.780] (II) event10 - (II) Dell WMI hotkeys: (II) is tagged by udev as: Keyboard
[  1979.780] (II) event10 - (II) Dell WMI hotkeys: (II) device is a keyboard
[  1979.780] (II) event10 - (II) Dell WMI hotkeys: (II) device removed
[  1979.780] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event10"
[  1979.780] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[  1979.780] (II) event10 - (II) Dell WMI hotkeys: (II) is tagged by udev as: Keyboard
[  1979.781] (II) event10 - (II) Dell WMI hotkeys: (II) device is a keyboard
[  1979.890] (**) Option "fd" "20"
[  1979.890] (II) event7  - (II) Power Button: (II) device removed
[  1979.890] (**) Option "fd" "23"
[  1979.890] (II) event9  - (II) Video Bus: (II) device removed
[  1979.890] (**) Option "fd" "24"
[  1979.890] (II) event5  - (II) Power Button: (II) device removed
[  1979.890] (**) Option "fd" "25"
[  1979.890] (II) event6  - (II) Sleep Button: (II) device removed
[  1979.890] (**) Option "fd" "26"
[  1979.890] (II) event11 - (II) Integrated_Webcam_HD: (II) device removed
[  1979.890] (**) Option "fd" "27"
[  1979.890] (II) event19 - (II) DLL075B:01 06CB:76AF Touchpad: (II) device removed
[  1979.891] (**) Option "fd" "28"
[  1979.891] (II) event3  - (II) Intel Virtual Button driver: (II) device removed
[  1979.891] (**) Option "fd" "29"
[  1979.891] (II) event1  - (II) Intel HID events: (II) device removed
[  1979.891] (**) Option "fd" "30"
[  1979.891] (II) event2  - (II) Intel HID 5 button array: (II) device removed
[  1979.891] (**) Option "fd" "31"
[  1979.891] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1979.891] (**) Option "fd" "32"
[  1979.891] (II) event20 - (II) PS/2 Synaptics TouchPad: (II) device removed
[  1979.891] (**) Option "fd" "33"
[  1979.891] (II) event10 - (II) Dell WMI hotkeys: (II) device removed
[  1979.892] (II) UnloadModule: "libinput"
[  1979.892] (II) systemd-logind: releasing fd for 13:74
[  1979.936] (II) UnloadModule: "libinput"
[  1979.936] (II) systemd-logind: releasing fd for 13:84
[  1979.973] (II) UnloadModule: "libinput"
[  1979.973] (II) systemd-logind: releasing fd for 13:64
[  1979.993] (II) UnloadModule: "libinput"
[  1979.993] (II) systemd-logind: releasing fd for 13:66
[  1980.013] (II) UnloadModule: "libinput"
[  1980.013] (II) systemd-logind: releasing fd for 13:65
[  1980.033] (II) UnloadModule: "libinput"
[  1980.033] (II) systemd-logind: releasing fd for 13:67
[  1980.053] (II) UnloadModule: "libinput"
[  1980.053] (II) systemd-logind: releasing fd for 13:83
[  1980.093] (II) UnloadModule: "libinput"
[  1980.093] (II) systemd-logind: releasing fd for 13:75
[  1980.133] (II) UnloadModule: "libinput"
[  1980.133] (II) systemd-logind: releasing fd for 13:70
[  1980.153] (II) UnloadModule: "libinput"
[  1980.153] (II) systemd-logind: releasing fd for 13:69
[  1980.173] (II) UnloadModule: "libinput"
[  1980.173] (II) systemd-logind: releasing fd for 13:73
[  1980.214] (II) UnloadModule: "libinput"
[  1980.214] (II) systemd-logind: releasing fd for 13:71
[  1981.500] (II) Server terminated successfully (0). Closing log file.

Offline

#5 2017-09-16 23:56:03

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: [SOLVED] Xorg/KDE installation problem

[  1981.500] (II) Server terminated successfully (0). Closing log file.

What did you configure X to execute?

Offline

#6 2017-09-16 23:57:18

circleface
Member
Registered: 2012-05-26
Posts: 639

Re: [SOLVED] Xorg/KDE installation problem

According to that last log, Xorg terminated sucessfully.  What are you seeing on the screen that doesn't work?

Offline

#7 2017-09-17 00:01:55

zindabad
Member
Registered: 2017-09-15
Posts: 13

Re: [SOLVED] Xorg/KDE installation problem

Huh. I guess I'm just being super careless here; sorry for the oversight. Here are the contents of my .xinitrc file, which I have in home

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login
exec startkde

Offline

#8 2017-09-17 00:04:34

loqs
Member
Registered: 2014-03-06
Posts: 19,113

Re: [SOLVED] Xorg/KDE installation problem

Xinit#xinitrc

This default xinitrc will start a basic environment with Twm, xorg-xclock and Xterm (assuming that the necessary packages are installed).

Remember that lines following a command using exec would be ignored.

Offline

#9 2017-09-17 00:08:35

zindabad
Member
Registered: 2017-09-15
Posts: 13

Re: [SOLVED] Xorg/KDE installation problem

this is definitely the dumbest thing I've done with Arch thus far. Thanks.

Offline

#10 2017-09-17 00:16:56

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [SOLVED] Xorg/KDE installation problem

Please make more of an effort to read the documentation on the wiki, rather than relying on the community to retype it for you here.

Remember to mark your thread as [Solved] by editing your first post and prepending it to the title.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

Pages: 1

Board footer

Powered by FluxBB