You are not logged in.

Pages: 1

#1 2017-10-02 09:14:30

zhazha
Member
Registered: 2017-10-02
Posts: 7

The xorg service can not be started

I used the Bumblebee's dual graphics solution，but still can not start.

The following is the error message：
[   952.821] (EE) open /dev/fb0: Permission denied
[   952.821] (WW) Falling back to old probe method for vesa
[   952.821] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   952.821] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   952.821] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   952.821] (==) modeset(0): RGB weight 888
[   952.821] (==) modeset(0): Default visual is TrueColor
[   952.821] (II) Loading sub module "glamoregl"
[   952.821] (II) LoadModule: "glamoregl"
[   952.821] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   952.822] (II) Module glamoregl: vendor="X.Org Foundation"
[   952.822]     compiled for 1.19.3, module version = 1.0.0
[   952.822]     ABI class: X.Org ANSI C Emulation, version 0.4
[   952.822] (II) glamor: OpenGL accelerated X.org driver based.
[   952.822] couldn't get display device
[   952.822] (EE) modeset(0): glamor initialization failed
[   952.822] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[   952.822] (II) modeset(0): Double-buffered shadow updates: off
[   952.823] (II) modeset(0): Output eDP-1 has no monitor section
[   952.823] (II) modeset(0): Output DP-1 has no monitor section
[   952.831] (II) modeset(0): Output HDMI-1 has no monitor section
[   952.832] (II) modeset(0): EDID for output eDP-1
[   952.833] (II) modeset(0): Manufacturer: AUO  Model: 36ed  Serial#: 0
[   952.833] (II) modeset(0): Year: 2013  Week: 0
[   952.833] (II) modeset(0): EDID Version: 1.4
[   952.833] (II) modeset(0): Digital Display Input
[   952.833] (II) modeset(0): 6 bits per channel
[   952.833] (II) modeset(0): Digital interface is DisplayPort
[   952.833] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   952.833] (II) modeset(0): Gamma: 2.20
[   952.833] (II) modeset(0): No DPMS capabilities specified
[   952.833] (II) modeset(0): Supported color encodings: RGB 4:4:4
[   952.833] (II) modeset(0): First detailed timing is preferred mode
[   952.833] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   952.833] (II) modeset(0): redX: 0.620 redY: 0.349   greenX: 0.324 greenY: 0.606
[   952.833] (II) modeset(0): blueX: 0.152 blueY: 0.118   whiteX: 0.313 whiteY: 0.329
[   952.833] (II) modeset(0): Manufacturer's mask: 0
[   952.833] (II) modeset(0): Supported detailed timing:
[   952.833] (II) modeset(0): clock: 142.0 MHz   Image Size:  344 x 193 mm
[   952.833] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0
[   952.833] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1126 v_border: 0
[   952.833] (II) modeset(0): Unknown vendor-specific block f
[   952.833] (II) modeset(0):  AUO
[   952.833] (II) modeset(0):  B156HTN03.6
[   952.833] (II) modeset(0): EDID (in hex):
[   952.833] (II) modeset(0):     00ffffffffffff0006afed3600000000
[   952.833] (II) modeset(0):     001701049522137802d1159e59539b27
[   952.833] (II) modeset(0):     1e505400000001010101010101010101
[   952.833] (II) modeset(0):     010101010101783780b470382e406c30
[   952.833] (II) modeset(0):     aa0058c1100000180000000f00000000
[   952.833] (II) modeset(0):     00000000000000000020000000fe0041
[   952.833] (II) modeset(0):     554f0a202020202020202020000000fe
[   952.833] (II) modeset(0):     004231353648544e30332e36200a0097
[   952.833] (II) modeset(0): Printing probed modes for output eDP-1
[   952.833] (II) modeset(0): Modeline "1920x1080"x60.1  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[   952.833] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   952.833] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   952.833] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   952.833] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   952.833] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   952.833] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   952.833] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   952.833] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   952.833] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   952.833] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   952.833] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   952.833] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   952.833] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   952.833] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   952.833] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   952.833] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   952.833] (II) modeset(0): EDID for output DP-1
[   952.841] (II) modeset(0): EDID for output HDMI-1
[   952.841] (II) modeset(0): Output eDP-1 connected
[   952.841] (II) modeset(0): Output DP-1 disconnected
[   952.841] (II) modeset(0): Output HDMI-1 disconnected
[   952.841] (II) modeset(0): Using exact sizes for initial modes
[   952.841] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[   952.841] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   952.841] (==) modeset(0): DPI set to (96, 96)
[   952.841] (II) Loading sub module "fb"
[   952.841] (II) LoadModule: "fb"
[   952.842] (II) Loading /usr/lib/xorg/modules/libfb.so
[   952.842] (II) Module fb: vendor="X.Org Foundation"
[   952.842]     compiled for 1.19.3, module version = 1.0.0
[   952.842]     ABI class: X.Org ANSI C Emulation, version 0.4
[   952.842] (II) Loading sub module "shadow"
[   952.842] (II) LoadModule: "shadow"
[   952.842] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   952.842] (II) Module shadow: vendor="X.Org Foundation"
[   952.842]     compiled for 1.19.3, module version = 1.1.0
[   952.842]     ABI class: X.Org ANSI C Emulation, version 0.4
[   952.842] (II) UnloadModule: "intel"
[   952.842] (II) Unloading intel
[   952.842] (II) UnloadModule: "fbdev"
[   952.842] (II) Unloading fbdev
[   952.842] (II) UnloadSubModule: "fbdevhw"
[   952.842] (II) Unloading fbdevhw
[   952.842] (II) UnloadModule: "vesa"
[   952.842] (II) Unloading vesa
[   952.842] (==) Depth 24 pixmap format is 32 bpp
[   952.842] (==) modeset(0): Backing store enabled
[   952.842] (==) modeset(0): Silken mouse enabled
[   952.842] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   952.902] (==) modeset(0): DPMS enabled
[   952.902] (--) RandR disabled
[   952.905] (II) AIGLX: Screen 0 is not DRI2 capable
[   952.905] (EE) AIGLX: reverting to software rendering
[   952.905] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/swrast_dri.so failed (/usr/lib/xorg/modules/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   952.905] (EE) GLX: could not load software renderer
[   952.905] (II) GLX: no usable GL providers found for screen 0
[   952.906] (II) modeset(0): Damage tracking initialized
[   952.906] (II) modeset(0): Setting screen physical size to 508 x 285
[   952.912] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[   952.913] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[   952.913] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[   952.913] XKB: Failed to compile keymap
[   952.913] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[   952.913] (EE)
Fatal server error:
[   952.913] (EE) Failed to activate virtual core keyboard: 2(EE)
[   952.913] (EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
[   952.913] (EE) Please also check the log file at "/home/laowang/.local/share/xorg/Xorg.0.log" for additional information.
[   952.913] (EE)
[   952.922] (EE) Server terminated with error (1). Closing log file.

Offline

#2 2017-10-02 09:34:33

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,874

Re: The xorg service can not be started

"Used" how - and why?
Outputs of "lspci" and also please provide the xorg log.

On a formal note, please edit your post and wrap the error output into "code" tags and continue to use those on future occasions. Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2017-10-02 09:41:28

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

Sorry, my first use does not understand. This is lspci related dry hardware information:

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
	Subsystem: ASUSTeK Computer Inc. Broadwell-U Host Bridge -OPI
	Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
	Subsystem: ASUSTeK Computer Inc. HD Graphics 5500
	Kernel driver in use: i915
	Kernel modules: i915
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
	Subsystem: ASUSTeK Computer Inc. Broadwell-U Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Processor Thermal Subsystem (rev 09)
	Subsystem: ASUSTeK Computer Inc. Broadwell-U Processor Thermal Subsystem
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP USB xHCI Controller
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP MEI Controller
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP High Definition Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP LPC Controller
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP SATA Controller [AHCI Mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP SMBus Controller
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
	Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP Thermal Management Controller
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
	Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
	Kernel driver in use: r8169
	Kernel modules: r8169
03:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
	Subsystem: AzureWave QCA9565 / AR9565 Wireless Network Adapter
	Kernel driver in use: ath9k
	Kernel modules: ath9k
04:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev ff)
	Kernel modules: nouveau, nvidia_drm, nvidia

Offline

#4 2017-10-02 09:46:24

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

I tried adding the

acpi_osi

kernel parameter to the boot, but it did not work.Can you tell me what to do？

Offline

#5 2017-10-02 10:07:49

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,874

Re: The xorg service can not be started

Please provide the xorg log.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2017-10-02 10:11:31

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

the Xorg.0.log.old:

 [   952.799] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[   952.802] X Protocol Version 11, Revision 0
[   952.803] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[   952.804] Current Operating System: Linux mylinux 4.13.3-1-ARCH #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017 x86_64
[   952.804] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=UUID=d1fdd7ba-daec-4bd2-aad5-fa4627cf8414 rw acpi_osi=! acpi_osi="Windows 2009" rootflags=subvol=rootfs
[   952.806] Build Date: 13 August 2017  09:37:50PM
[   952.808]  
[   952.809] Current version of pixman: 0.34.0
[   952.811] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   952.811] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   952.815] (==) Log file: "/home/laowang/.local/share/xorg/Xorg.0.log", Time: Mon Oct  2 16:47:19 2017
[   952.816] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   952.816] (==) No Layout section.  Using the first Screen section.
[   952.816] (==) No screen section available. Using defaults.
[   952.816] (**) |-->Screen "Default Screen Section" (0)
[   952.816] (**) |   |-->Monitor "<default monitor>"
[   952.816] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   952.816] (==) Automatically adding devices
[   952.816] (==) Automatically enabling devices
[   952.816] (==) Automatically adding GPU devices
[   952.816] (==) Automatically binding GPU devices
[   952.816] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   952.816] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   952.816] 	Entry deleted from font path.
[   952.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   952.816] 	Entry deleted from font path.
[   952.816] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   952.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   952.816] 	Entry deleted from font path.
[   952.816] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   952.816] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   952.816] (==) ModulePath set to "/usr/lib/xorg/modules"
[   952.816] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   952.816] (II) Loader magic: 0x55e5d92bbd40
[   952.816] (II) Module ABI versions:
[   952.816] 	X.Org ANSI C Emulation: 0.4
[   952.816] 	X.Org Video Driver: 23.0
[   952.816] 	X.Org XInput driver : 24.1
[   952.816] 	X.Org Server Extension : 10.0
[   952.816] (++) using VT number 1

[   952.816] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   952.817] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   952.818] (II) xfree86: Adding drm device (/dev/dri/card0)
[   952.818] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   952.819] (--) PCI:*(0:0:2:0) 8086:1616:1043:1a6d rev 9, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   952.819] (--) PCI: (0:4:0:0) 10de:1347:1043:1a6d rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[   952.819] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   952.820] (II) LoadModule: "glx"
[   952.820] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   952.820] (II) Module glx: vendor="X.Org Foundation"
[   952.820] 	compiled for 1.19.3, module version = 1.0.0
[   952.820] 	ABI class: X.Org Server Extension, version 10.0
[   952.820] (II) Applying OutputClass "intel" to /dev/dri/card0
[   952.820] 	loading driver: modesetting
[   952.820] (==) Matched modesetting as autoconfigured driver 0
[   952.820] (==) Matched intel as autoconfigured driver 1
[   952.820] (==) Matched intel as autoconfigured driver 2
[   952.820] (==) Matched modesetting as autoconfigured driver 3
[   952.820] (==) Matched fbdev as autoconfigured driver 4
[   952.820] (==) Matched vesa as autoconfigured driver 5
[   952.820] (==) Assigned the driver to the xf86ConfigLayout
[   952.820] (II) LoadModule: "modesetting"
[   952.820] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   952.820] (II) Module modesetting: vendor="X.Org Foundation"
[   952.820] 	compiled for 1.19.3, module version = 1.19.3
[   952.820] 	Module class: X.Org Video Driver
[   952.820] 	ABI class: X.Org Video Driver, version 23.0
[   952.820] (II) LoadModule: "intel"
[   952.820] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   952.821] (II) Module intel: vendor="X.Org Foundation"
[   952.821] 	compiled for 1.19.3, module version = 2.99.917
[   952.821] 	Module class: X.Org Video Driver
[   952.821] 	ABI class: X.Org Video Driver, version 23.0
[   952.821] (II) LoadModule: "fbdev"
[   952.821] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   952.821] (II) Module fbdev: vendor="X.Org Foundation"
[   952.821] 	compiled for 1.19.3, module version = 0.4.4
[   952.821] 	Module class: X.Org Video Driver
[   952.821] 	ABI class: X.Org Video Driver, version 23.0
[   952.821] (II) LoadModule: "vesa"
[   952.821] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   952.821] (II) Module vesa: vendor="X.Org Foundation"
[   952.821] 	compiled for 1.19.3, module version = 2.3.4
[   952.821] 	Module class: X.Org Video Driver
[   952.821] 	ABI class: X.Org Video Driver, version 23.0
[   952.821] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   952.821] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   952.821] (II) intel: Driver for Intel(R) HD Graphics
[   952.821] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   952.821] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   952.821] (II) FBDEV: driver for framebuffer: fbdev
[   952.821] (II) VESA: driver for VESA chipsets: vesa
[   952.821] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   952.821] (II) modeset(0): using drv /dev/dri/card0
[   952.821] (WW) Falling back to old probe method for modesetting
[   952.821] (WW) Falling back to old probe method for fbdev
[   952.821] (II) Loading sub module "fbdevhw"
[   952.821] (II) LoadModule: "fbdevhw"
[   952.821] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   952.821] (II) Module fbdevhw: vendor="X.Org Foundation"
[   952.821] 	compiled for 1.19.3, module version = 0.0.2
[   952.821] 	ABI class: X.Org Video Driver, version 23.0
[   952.821] (EE) open /dev/fb0: Permission denied
[   952.821] (WW) Falling back to old probe method for vesa
[   952.821] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   952.821] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   952.821] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   952.821] (==) modeset(0): RGB weight 888
[   952.821] (==) modeset(0): Default visual is TrueColor
[   952.821] (II) Loading sub module "glamoregl"
[   952.821] (II) LoadModule: "glamoregl"
[   952.821] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   952.822] (II) Module glamoregl: vendor="X.Org Foundation"
[   952.822] 	compiled for 1.19.3, module version = 1.0.0
[   952.822] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   952.822] (II) glamor: OpenGL accelerated X.org driver based.
[   952.822] couldn't get display device
[   952.822] (EE) modeset(0): glamor initialization failed
[   952.822] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[   952.822] (II) modeset(0): Double-buffered shadow updates: off
[   952.823] (II) modeset(0): Output eDP-1 has no monitor section
[   952.823] (II) modeset(0): Output DP-1 has no monitor section
[   952.831] (II) modeset(0): Output HDMI-1 has no monitor section
[   952.832] (II) modeset(0): EDID for output eDP-1
[   952.833] (II) modeset(0): Manufacturer: AUO  Model: 36ed  Serial#: 0
[   952.833] (II) modeset(0): Year: 2013  Week: 0
[   952.833] (II) modeset(0): EDID Version: 1.4
[   952.833] (II) modeset(0): Digital Display Input
[   952.833] (II) modeset(0): 6 bits per channel
[   952.833] (II) modeset(0): Digital interface is DisplayPort
[   952.833] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   952.833] (II) modeset(0): Gamma: 2.20
[   952.833] (II) modeset(0): No DPMS capabilities specified
[   952.833] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[   952.833] (II) modeset(0): First detailed timing is preferred mode
[   952.833] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   952.833] (II) modeset(0): redX: 0.620 redY: 0.349   greenX: 0.324 greenY: 0.606
[   952.833] (II) modeset(0): blueX: 0.152 blueY: 0.118   whiteX: 0.313 whiteY: 0.329
[   952.833] (II) modeset(0): Manufacturer's mask: 0
[   952.833] (II) modeset(0): Supported detailed timing:
[   952.833] (II) modeset(0): clock: 142.0 MHz   Image Size:  344 x 193 mm
[   952.833] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0
[   952.833] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1126 v_border: 0
[   952.833] (II) modeset(0): Unknown vendor-specific block f
[   952.833] (II) modeset(0):  AUO
[   952.833] (II) modeset(0):  B156HTN03.6
[   952.833] (II) modeset(0): EDID (in hex):
[   952.833] (II) modeset(0): 	00ffffffffffff0006afed3600000000
[   952.833] (II) modeset(0): 	001701049522137802d1159e59539b27
[   952.833] (II) modeset(0): 	1e505400000001010101010101010101
[   952.833] (II) modeset(0): 	010101010101783780b470382e406c30
[   952.833] (II) modeset(0): 	aa0058c1100000180000000f00000000
[   952.833] (II) modeset(0): 	00000000000000000020000000fe0041
[   952.833] (II) modeset(0): 	554f0a202020202020202020000000fe
[   952.833] (II) modeset(0): 	004231353648544e30332e36200a0097
[   952.833] (II) modeset(0): Printing probed modes for output eDP-1
[   952.833] (II) modeset(0): Modeline "1920x1080"x60.1  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[   952.833] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   952.833] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   952.833] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   952.833] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   952.833] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   952.833] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   952.833] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   952.833] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   952.833] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   952.833] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   952.833] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   952.833] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   952.833] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   952.833] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   952.833] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   952.833] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   952.833] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   952.833] (II) modeset(0): EDID for output DP-1
[   952.841] (II) modeset(0): EDID for output HDMI-1
[   952.841] (II) modeset(0): Output eDP-1 connected
[   952.841] (II) modeset(0): Output DP-1 disconnected
[   952.841] (II) modeset(0): Output HDMI-1 disconnected
[   952.841] (II) modeset(0): Using exact sizes for initial modes
[   952.841] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[   952.841] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   952.841] (==) modeset(0): DPI set to (96, 96)
[   952.841] (II) Loading sub module "fb"
[   952.841] (II) LoadModule: "fb"
[   952.842] (II) Loading /usr/lib/xorg/modules/libfb.so
[   952.842] (II) Module fb: vendor="X.Org Foundation"
[   952.842] 	compiled for 1.19.3, module version = 1.0.0
[   952.842] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   952.842] (II) Loading sub module "shadow"
[   952.842] (II) LoadModule: "shadow"
[   952.842] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   952.842] (II) Module shadow: vendor="X.Org Foundation"
[   952.842] 	compiled for 1.19.3, module version = 1.1.0
[   952.842] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   952.842] (II) UnloadModule: "intel"
[   952.842] (II) Unloading intel
[   952.842] (II) UnloadModule: "fbdev"
[   952.842] (II) Unloading fbdev
[   952.842] (II) UnloadSubModule: "fbdevhw"
[   952.842] (II) Unloading fbdevhw
[   952.842] (II) UnloadModule: "vesa"
[   952.842] (II) Unloading vesa
[   952.842] (==) Depth 24 pixmap format is 32 bpp
[   952.842] (==) modeset(0): Backing store enabled
[   952.842] (==) modeset(0): Silken mouse enabled
[   952.842] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   952.902] (==) modeset(0): DPMS enabled
[   952.902] (--) RandR disabled
[   952.905] (II) AIGLX: Screen 0 is not DRI2 capable
[   952.905] (EE) AIGLX: reverting to software rendering
[   952.905] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/swrast_dri.so failed (/usr/lib/xorg/modules/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   952.905] (EE) GLX: could not load software renderer
[   952.905] (II) GLX: no usable GL providers found for screen 0
[   952.906] (II) modeset(0): Damage tracking initialized
[   952.906] (II) modeset(0): Setting screen physical size to 508 x 285
[   952.912] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[   952.913] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[   952.913] (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev
[   952.913] XKB: Failed to compile keymap
[   952.913] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[   952.913] (EE) 
Fatal server error:
[   952.913] (EE) Failed to activate virtual core keyboard: 2(EE) 
[   952.913] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   952.913] (EE) Please also check the log file at "/home/laowang/.local/share/xorg/Xorg.0.log" for additional information.
[   952.913] (EE) 
[   952.922] (EE) Server terminated with error (1). Closing log file.

Offline

#7 2017-10-02 10:41:59

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

seth wrote:

In the following, thank you！

Offline

#8 2017-10-02 11:17:50

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,874

Re: The xorg service can not be started

open /dev/fb0: Permission denied
/usr/lib/xorg/modules/dri/swrast_dri.so: cannot open shared object file
XKB: Couldn't open rules file /usr/share/X11/xkb/rules/evdev

There's quite some mess about file permissions, eg. /usr/lib/xorg/modules/dri/swrast_dri.so should be 755 - world readable.

=> What *exactly* have you done in your efforts to "use[d] the Bumblebee's dual graphics solution"?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2017-10-02 11:48:03

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

seth wrote:

Yes, but I was missing the file and did not know the file in that package. I have started the Bumblebee and disabled the discrete graphics.What should I do now?

Last edited by zhazha (2017-10-02 11:53:51)

Offline

#10 2017-10-02 12:02:35

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,874

Re: The xorg service can not be started

Sorry, but i cannot read any sense into your last statement (which is btw. not a quote of mine)

What *exactly* have you done in your efforts to "use[d] the Bumblebee's dual graphics solution"?

If this is a language problem, try https://www.deepl.com/translator

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2017-10-02 12:18:34

zhazha
Member
Registered: 2017-10-02
Posts: 7

Re: The xorg service can not be started

seth wrote:

ok,Thank you.I would like to use the 

 bumblebee

program, and has banned the  Special Display Card.what should I do now？

Offline

#12 2017-10-02 12:26:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,874

Re: The xorg service can not be started

I give up.
The only thing I can suggest is to head over to the foreign languge board and find somebody who speaks your native tongue.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB