No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

k.somoykhan · 2017-10-06 18:59:53

Dualbooted with windows 10 and also enabled bumblebee on my arch system. When i boot my system it directly boots into arch, the screen stays black until the live boot of arch appears and everything works normally after that. the problem is bios menu doesnt show up neither the bootctl menu. it seems like the pci or display is off during the bootup process but everything does things normally.

Things i did before my system was fine -
1. installed virtualbox and executed "sudo modprobe vboxdrv"
2. executed "sleep 1000 &"

Things I tried to fix:
1.systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target (thinking it was a suspend issue)
2.disabled bumbleed.service
3.executed "sudo mkinitcpio -p linux & sudo bootctl update"
4. systemctl reboot --firmware-setup
5.Tried to attach monitors to the external video ports (VGA/HDMI/DP/DVI)
6. Booted to windows and flashed bios firmware

arch.conf settings: 
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux-fallback.img
initrd  /intel-ucode.img
options root=dev/sda6 acpi_osi=! acpi_osi="Windows 2015" acpi_backlight=native rw

Last edited by k.somoykhan (2017-10-06 21:52:42)

k.somoykhan · 2017-10-06 19:02:33

dmesg output : 
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[    0.000000] Linux version 4.13.3-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017
[    0.000000] Command line: initrd=\initramfs-linux-fallback.img initrd=\intel-ucode.img root=dev/sda6 acpi_osi=! acpi_osi="Windows 2015" acpi_backlight=native  rw
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072e84fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000072e85000-0x0000000072e85fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000072e86000-0x0000000072ecffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000072ed0000-0x0000000072f21fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000072f22000-0x0000000073470fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000073471000-0x00000000766f1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000766f2000-0x0000000077590fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077591000-0x00000000775b8fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000775b9000-0x0000000077c10fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077c11000-0x0000000077ffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000281ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x6f313018-0x6f32c657] usable ==> usable
[    0.000000] e820: update [mem 0x6f313018-0x6f32c657] usable ==> usable
[    0.000000] e820: update [mem 0x6f302018-0x6f312057] usable ==> usable
[    0.000000] e820: update [mem 0x6f302018-0x6f312057] usable ==> usable
[    0.000000] e820: update [mem 0x6f2f4018-0x6f301857] usable ==> usable
[    0.000000] e820: update [mem 0x6f2f4018-0x6f301857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006f2f4017] usable
[    0.000000] reserve setup_data: [mem 0x000000006f2f4018-0x000000006f301857] usable
[    0.000000] reserve setup_data: [mem 0x000000006f301858-0x000000006f302017] usable
[    0.000000] reserve setup_data: [mem 0x000000006f302018-0x000000006f312057] usable
[    0.000000] reserve setup_data: [mem 0x000000006f312058-0x000000006f313017] usable
[    0.000000] reserve setup_data: [mem 0x000000006f313018-0x000000006f32c657] usable
[    0.000000] reserve setup_data: [mem 0x000000006f32c658-0x0000000072e84fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000072e85000-0x0000000072e85fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000072e86000-0x0000000072ecffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000072ed0000-0x0000000072f21fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000072f22000-0x0000000073470fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000073471000-0x00000000766f1fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000766f2000-0x0000000077590fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000077591000-0x00000000775b8fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000775b9000-0x0000000077c10fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000077c11000-0x0000000077ffdfff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000780fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000281ffffff] usable
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x77e72f98  ACPI=0x77591000  ACPI 2.0=0x77591000  SMBIOS=0x77e71000  SMBIOS 3.0=0x77e70000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. Inspiron 7559/0MPYPP, BIOS 1.2.4 06/08/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x282000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 0079000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0078800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x0000000077e72f98 to 0x0000000077e72fd0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9915c0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x268d5e000, 0x268d5efff] PGTABLE
[    0.000000] BRK [0x268d5f000, 0x268d5ffff] PGTABLE
[    0.000000] BRK [0x268d60000, 0x268d60fff] PGTABLE
[    0.000000] BRK [0x268d61000, 0x268d61fff] PGTABLE
[    0.000000] BRK [0x268d62000, 0x268d62fff] PGTABLE
[    0.000000] BRK [0x268d63000, 0x268d63fff] PGTABLE
[    0.000000] BRK [0x268d64000, 0x268d64fff] PGTABLE
[    0.000000] BRK [0x268d65000, 0x268d65fff] PGTABLE
[    0.000000] BRK [0x268d66000, 0x268d66fff] PGTABLE
[    0.000000] BRK [0x268d67000, 0x268d67fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x6f32d000-0x70bd0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000077591000 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000775910B0 0000E4 (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000775AA720 00010C (v05 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000077591228 0194F4 (v02 DELL   QA09     01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x0000000077C0DF80 000040
[    0.000000] ACPI: APIC 0x00000000775AA830 0000BC (v03 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000775AA8F0 000044 (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000775AA938 00009C (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000775AA9D8 00003C (v01 DELL   QA09     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000775AAA18 000038 (v01 DELL   QA09     01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x00000000775AAA50 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x00000000775AAD68 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000775AAE00 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000775AB048 000ED1 (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000775ABF20 000C45 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x00000000775ACB68 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000775ACBA0 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000775ACBF8 0035D6 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[    0.000000] ACPI: BOOT 0x00000000775B01D0 000028 (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: SLIC 0x00000000775B01F8 000176 (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000775B0370 0053B6 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000775B5728 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000775B5770 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x00000000775B65C8 000038 (v01 DELL   QA09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000775B6600 0000D1 (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x00000000775B66D8 0000CC (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: TPM2 0x00000000775B67A8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x00000000775B67E0 0019FF (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000281ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x281ffb000-0x281ffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000281ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000072e84fff]
[    0.000000]   node   0: [mem 0x0000000072ed0000-0x0000000072f21fff]
[    0.000000]   node   0: [mem 0x0000000073471000-0x00000000766f1fff]
[    0.000000]   node   0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000281ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000281ffffff]
[    0.000000] On node 0 totalpages: 2064629
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7494 pages used for memmap
[    0.000000]   DMA32 zone: 479577 pages, LIFO batch:31
[    0.000000]   Normal zone: 24704 pages used for memmap
[    0.000000]   Normal zone: 1581056 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007cffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f2f4000-0x6f2f4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f301000-0x6f301fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f302000-0x6f302fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f312000-0x6f312fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f313000-0x6f313fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f32c000-0x6f32cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x72e85000-0x72e85fff]
[    0.000000] PM: Registered nosave memory: [mem 0x72e86000-0x72ecffff]
[    0.000000] PM: Registered nosave memory: [mem 0x72f22000-0x73470fff]
[    0.000000] PM: Registered nosave memory: [mem 0x766f2000-0x77590fff]
[    0.000000] PM: Registered nosave memory: [mem 0x77591000-0x775b8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x775b9000-0x77c10fff]
[    0.000000] PM: Registered nosave memory: [mem 0x77c11000-0x77ffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7cffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7d000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff991841c00000 s106520 r8192 d32744 u262144
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2032346
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux-fallback.img initrd=\intel-ucode.img root=dev/sda6 acpi_osi=! acpi_osi="Windows 2015" acpi_backlight=native  rw
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7952988K/8258516K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 305528K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 28108 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 8448, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] tsc: Detected 2600.000 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.00 BogoMIPS (lpj=8640000)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.033667] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.033874] Security Framework initialized
[    0.033875] Yama: becoming mindful.
[    0.035237] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.035896] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.035937] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.035959] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.036119] CPU: Physical Processor ID: 0
[    0.036119] CPU: Processor Core ID: 0
[    0.036123] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.036123] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.036127] mce: CPU supports 10 MCE banks
[    0.036136] CPU0: Thermal monitoring enabled (TM1)
[    0.036154] process: using mwait in idle threads
[    0.036156] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.036157] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.036835] Freeing SMP alternatives memory: 24K
[    0.041612] smpboot: Max logical packages: 2
[    0.041616] DMAR: Host address width 39
[    0.041617] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.041622] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
[    0.041623] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.041627] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.041628] DMAR: RMRR base: 0x0000007730b000 end: 0x0000007732afff
[    0.041629] DMAR: RMRR base: 0x00000078800000 end: 0x0000007cffffff
[    0.041630] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.041632] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.041632] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.041633] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.041634] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.044162] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.044162] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.048141] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081175] TSC deadline timer enabled
[    0.081180] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.093348] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.093393] ... version:                4
[    0.093393] ... bit width:              48
[    0.093394] ... generic registers:      4
[    0.093394] ... value mask:             0000ffffffffffff
[    0.093395] ... max period:             00007fffffffffff
[    0.093395] ... fixed-purpose events:   3
[    0.093396] ... event mask:             000000070000000f
[    0.100006] Hierarchical SRCU implementation.
[    0.113475] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.120004] smp: Bringing up secondary CPUs ...
[    0.146702] x86: Booting SMP configuration:
[    0.146703] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.890037] smp: Brought up 1 node, 8 CPUs
[    0.890037] smpboot: Total of 8 processors activated (41499.87 BogoMIPS)
[    0.893628] devtmpfs: initialized
[    0.893628] x86/mm: Memory block size: 128MB
[    0.893891] PM: Registering ACPI NVS region [mem 0x72e85000-0x72e85fff] (4096 bytes)
[    0.893891] PM: Registering ACPI NVS region [mem 0x775b9000-0x77c10fff] (6651904 bytes)
[    0.893891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.893891] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.893891] pinctrl core: initialized pinctrl subsystem
[    0.893891] RTC time: 11:08:32, date: 10/06/17
[    0.893891] NET: Registered protocol family 16
[    0.893891] cpuidle: using governor ladder
[    0.893891] cpuidle: using governor menu
[    0.893891] PCCT header not found.
[    0.893891] Simple Boot Flag at 0x47 set to 0x1
[    0.893891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.893891] ACPI: bus type PCI registered
[    0.893891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.893891] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.893891] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.893891] PCI: Using configuration type 1 for base access
[    0.893972] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.893972] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.893972] ACPI: Disabled all _OSI OS vendors
[    0.893972] ACPI: Added _OSI(Module Device)
[    0.893972] ACPI: Added _OSI(Processor Device)
[    0.893972] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.893972] ACPI: Added _OSI(Processor Aggregator Device)
[    0.893972] ACPI: Added _OSI(Windows 2015)
[    0.896801] ACPI: Executed 19 blocks of module-level executable AML code
[    0.906104] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.907484] ACPI: Dynamic OEM Table Load:
[    0.907490] ACPI: SSDT 0xFFFF991837F6A000 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.907733] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.908925] ACPI: Dynamic OEM Table Load:
[    0.908930] ACPI: SSDT 0xFFFF991837A49400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.909735] ACPI: Dynamic OEM Table Load:
[    0.909740] ACPI: SSDT 0xFFFF991837F6D000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.909999] ACPI: Dynamic OEM Table Load:
[    0.909999] ACPI: SSDT 0xFFFF991837A47E00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.917169] ACPI: EC: EC started
[    0.917170] ACPI: EC: interrupt blocked
[    0.918534] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.918536] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x46, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.918537] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.918537] ACPI: Interpreter enabled
[    0.918575] ACPI: (supports S0 S3 S4 S5)
[    0.918576] ACPI: Using IOAPIC for interrupt routing
[    0.918608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.927910] ACPI: Power Resource [PG00] (on)
[    0.993490] ACPI: Power Resource [FN00] (off)
[    0.993549] ACPI: Power Resource [FN01] (off)
[    0.993609] ACPI: Power Resource [FN02] (off)
[    0.993667] ACPI: Power Resource [FN03] (off)
[    0.993723] ACPI: Power Resource [FN04] (off)
[    0.994718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.994722] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.994751] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.995203] PCI host bridge to bus 0000:00
[    0.995205] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.995206] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.995207] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.995208] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.995209] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.995210] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.995210] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.995211] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.995212] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.995213] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.995214] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.995215] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.995215] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.995216] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.995217] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.995218] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.995219] pci_bus 0000:00: root bus resource [mem 0x7d000000-0xdfffffff window]
[    0.995220] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.995221] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.995227] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.995331] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.995367] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.995495] pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
[    0.995530] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.995672] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.995681] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.995686] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.995689] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.995802] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.995812] pci 0000:00:04.0: reg 0x10: [mem 0xdf420000-0xdf427fff 64bit]
[    0.995987] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.996006] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
[    0.996065] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.996177] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.996196] pci 0000:00:14.2: reg 0x10: [mem 0xdf437000-0xdf437fff 64bit]
[    0.996427] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[    0.996529] pci 0000:00:15.0: reg 0x10: [mem 0xdf436000-0xdf436fff 64bit]
[    0.997178] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.997201] pci 0000:00:16.0: reg 0x10: [mem 0xdf435000-0xdf435fff 64bit]
[    0.997269] pci 0000:00:16.0: PME# supported from D3hot
[    0.997400] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.997416] pci 0000:00:17.0: reg 0x10: [mem 0xdf430000-0xdf431fff]
[    0.997422] pci 0000:00:17.0: reg 0x14: [mem 0xdf434000-0xdf4340ff]
[    0.997428] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.997434] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.997441] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.997447] pci 0000:00:17.0: reg 0x24: [mem 0xdf433000-0xdf4337ff]
[    0.997482] pci 0000:00:17.0: PME# supported from D3hot
[    0.997603] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.997657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.997794] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[    0.997851] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.997862] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[    0.997986] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    0.998045] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.998056] pci 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[    0.998179] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.998236] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.998246] pci 0000:00:1c.6: Intel SPT PCH root port ACS workaround enabled
[    0.998378] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[    0.998583] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.998595] pci 0000:00:1f.2: reg 0x10: [mem 0xdf42c000-0xdf42ffff]
[    0.998739] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.998763] pci 0000:00:1f.3: reg 0x10: [mem 0xdf428000-0xdf42bfff 64bit]
[    0.998786] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
[    0.998830] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.999000] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.999060] pci 0000:00:1f.4: reg 0x10: [mem 0xdf432000-0xdf4320ff 64bit]
[    0.999129] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.999330] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.999367] pci 0000:02:00.0: [10de:139b] type 00 class 0x030200
[    0.999379] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.999386] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.999393] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.999398] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.999403] pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    1.006677] pci 0000:00:01.1: PCI bridge to [bus 02]
[    1.006679] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    1.006681] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    1.006684] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.006743] acpiphp: Slot [1] registered
[    1.006746] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.006819] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    1.006846] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    1.006870] pci 0000:04:00.0: reg 0x18: [mem 0xdf304000-0xdf304fff 64bit]
[    1.006885] pci 0000:04:00.0: reg 0x20: [mem 0xdf300000-0xdf303fff 64bit]
[    1.006972] pci 0000:04:00.0: supports D1 D2
[    1.006973] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.016688] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    1.016690] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    1.016692] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    1.016919] pci 0000:05:00.0: [8086:3165] type 00 class 0x028000
[    1.016966] pci 0000:05:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[    1.017214] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    1.026847] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    1.026850] pci 0000:00:1c.5:   bridge window [mem 0xdf200000-0xdf2fffff]
[    1.026937] pci 0000:06:00.0: [10ec:522a] type 00 class 0xff0000
[    1.026960] pci 0000:06:00.0: reg 0x10: [mem 0xdf100000-0xdf100fff]
[    1.027063] pci 0000:06:00.0: supports D1 D2
[    1.027064] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.040037] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    1.040040] pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.041405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041449] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.041490] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041532] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041573] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041614] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041655] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.041695] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.042204] ACPI: Enabled 5 GPEs in block 00 to 7F
[    1.042344] ACPI: EC: interrupt unblocked
[    1.042356] ACPI: EC: event unblocked
[    1.042385] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x46, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.042386] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    1.042438] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.042438] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.042438] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.042438] vgaarb: loaded
[    1.042438] EDAC MC: Ver: 3.0.0
[    1.042438] Registered efivars operations
[    1.046681] PCI: Using ACPI for IRQ routing
[    1.072588] PCI: pci_cache_line_size set to 64 bytes
[    1.072995] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.072996] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    1.072997] e820: reserve RAM buffer [mem 0x6f2f4018-0x6fffffff]
[    1.072998] e820: reserve RAM buffer [mem 0x6f302018-0x6fffffff]
[    1.072999] e820: reserve RAM buffer [mem 0x6f313018-0x6fffffff]
[    1.072999] e820: reserve RAM buffer [mem 0x72e85000-0x73ffffff]
[    1.073000] e820: reserve RAM buffer [mem 0x72f22000-0x73ffffff]
[    1.073001] e820: reserve RAM buffer [mem 0x766f2000-0x77ffffff]
[    1.073002] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[    1.073003] e820: reserve RAM buffer [mem 0x282000000-0x283ffffff]
[    1.073077] NetLabel: Initializing
[    1.073077] NetLabel:  domain hash size = 128
[    1.073078] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.073089] NetLabel:  unlabeled traffic allowed by default
[    1.073393] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.073397] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.077694] clocksource: Switched to clocksource hpet
[    1.083499] VFS: Disk quotas dquot_6.6.0
[    1.083516] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.083567] pnp: PnP ACPI init
[    1.083750] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.083752] system 00:00: [io  0xffff] has been reserved
[    1.083753] system 00:00: [io  0xffff] has been reserved
[    1.083754] system 00:00: [io  0xffff] has been reserved
[    1.083755] system 00:00: [io  0x1800-0x18fe] has been reserved
[    1.083756] system 00:00: [io  0x164e-0x164f] has been reserved
[    1.083757] system 00:00: [io  0x0380-0x0387] has been reserved
[    1.083760] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.083842] system 00:01: [io  0x0800-0x087f] has been reserved
[    1.083844] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.083859] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.083889] system 00:03: [io  0x1854-0x1857] has been reserved
[    1.083891] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.084148] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.084149] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.084150] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.084151] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    1.084152] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.084153] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.084154] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.084162] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    1.084164] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.084165] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[    1.084167] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.084200] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    1.084201] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    1.084202] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    1.084203] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.084204] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    1.084205] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    1.084206] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    1.084208] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.084475] system 00:06: [io  0xff00-0xfffe] has been reserved
[    1.084477] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.085388] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.085750] pnp 00:08: Plug and Play ACPI device, IDs DLL0706 PNP0f13 (active)
[    1.085767] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.086019] pnp: PnP ACPI: found 10 devices
[    1.093324] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.093361] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    1.093363] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    1.093364] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    1.093386] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7d000000-0x7d1fffff]
[    1.093395] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7d200000-0x7d3fffff 64bit pref]
[    1.093396] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    1.093398] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.093403] pci 0000:00:01.1: PCI bridge to [bus 02]
[    1.093405] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    1.093407] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    1.093409] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.093411] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.093413] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.093416] pci 0000:00:1c.0:   bridge window [mem 0x7d000000-0x7d1fffff]
[    1.093418] pci 0000:00:1c.0:   bridge window [mem 0x7d200000-0x7d3fffff 64bit pref]
[    1.093421] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    1.093423] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    1.093425] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    1.093430] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    1.093433] pci 0000:00:1c.5:   bridge window [mem 0xdf200000-0xdf2fffff]
[    1.093437] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    1.093440] pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.093446] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.093447] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.093448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.093448] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    1.093449] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    1.093450] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    1.093451] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    1.093452] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    1.093453] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    1.093454] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    1.093454] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    1.093455] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    1.093456] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    1.093457] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    1.093458] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    1.093459] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    1.093459] pci_bus 0000:00: resource 20 [mem 0x7d000000-0xdfffffff window]
[    1.093460] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    1.093461] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    1.093462] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[    1.093463] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.093464] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.093465] pci_bus 0000:03: resource 1 [mem 0x7d000000-0x7d1fffff]
[    1.093466] pci_bus 0000:03: resource 2 [mem 0x7d200000-0x7d3fffff 64bit pref]
[    1.093467] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    1.093467] pci_bus 0000:04: resource 1 [mem 0xdf300000-0xdf3fffff]
[    1.093468] pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
[    1.093469] pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
[    1.093588] NET: Registered protocol family 2
[    1.093707] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.093814] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.093999] TCP: Hash tables configured (established 65536 bind 65536)
[    1.094027] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.094053] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.094103] NET: Registered protocol family 1
[    1.094114] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.094986] PCI: CLS 0 bytes, default 64
[    1.095011] Unpacking initramfs...
[    1.466580] Freeing initrd memory: 25232K
[    1.466613] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    1.466622] DMAR: No ATSR found
[    1.467478] DMAR: dmar0: Using Queued invalidation
[    1.467482] DMAR: dmar1: Using Queued invalidation
[    1.467595] DMAR: Setting RMRR:
[    1.467643] DMAR: Setting identity map for device 0000:00:02.0 [0x78800000 - 0x7cffffff]
[    1.467676] DMAR: Setting identity map for device 0000:00:14.0 [0x7730b000 - 0x7732afff]
[    1.467682] DMAR: Prepare 0-16MiB unity mapping for LPC
[    1.467710] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    1.467719] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.467763] iommu: Adding device 0000:00:00.0 to group 0
[    1.467776] iommu: Adding device 0000:00:01.0 to group 1
[    1.467783] iommu: Adding device 0000:00:01.1 to group 1
[    1.467789] iommu: Adding device 0000:00:02.0 to group 2
[    1.467796] iommu: Adding device 0000:00:04.0 to group 3
[    1.467807] iommu: Adding device 0000:00:14.0 to group 4
[    1.467814] iommu: Adding device 0000:00:14.2 to group 4
[    1.467823] iommu: Adding device 0000:00:15.0 to group 5
[    1.467831] iommu: Adding device 0000:00:16.0 to group 6
[    1.467837] iommu: Adding device 0000:00:17.0 to group 7
[    1.467865] iommu: Adding device 0000:00:1c.0 to group 8
[    1.467873] iommu: Adding device 0000:00:1c.4 to group 9
[    1.467882] iommu: Adding device 0000:00:1c.5 to group 10
[    1.467890] iommu: Adding device 0000:00:1c.6 to group 11
[    1.467906] iommu: Adding device 0000:00:1f.0 to group 12
[    1.467913] iommu: Adding device 0000:00:1f.2 to group 12
[    1.467919] iommu: Adding device 0000:00:1f.3 to group 12
[    1.467926] iommu: Adding device 0000:00:1f.4 to group 12
[    1.467929] iommu: Adding device 0000:02:00.0 to group 1
[    1.467937] iommu: Adding device 0000:04:00.0 to group 13
[    1.467945] iommu: Adding device 0000:05:00.0 to group 14
[    1.467954] iommu: Adding device 0000:06:00.0 to group 15
[    1.469504] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    1.469723] Scanning for low memory corruption every 60 seconds
[    1.470280] Initialise system trusted keyrings
[    1.470287] Key type blacklist registered
[    1.470363] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.471164] zbud: loaded
[    1.472243] Key type asymmetric registered
[    1.472264] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.472318] io scheduler noop registered
[    1.472319] io scheduler deadline registered
[    1.472338] io scheduler cfq registered (default)
[    1.472338] io scheduler mq-deadline registered
[    1.472339] io scheduler kyber registered
[    1.472356] io scheduler bfq registered
[    1.473298] efifb: probing for efifb
[    1.473307] efifb: framebuffer at 0xb0000000, using 8100k, total 8100k
[    1.473308] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.473308] efifb: scrolling: redraw
[    1.473309] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.477063] Console: switching to colour frame buffer device 240x67
[    1.480671] fb0: EFI VGA frame buffer device
[    1.480676] intel_idle: MWAIT substates: 0x11142120
[    1.480677] intel_idle: v0.4.1 model 0x5E
[    1.481067] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.481207] GHES: HEST is not enabled!
[    1.481285] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.481809] Linux agpgart interface v0.103
[    1.482352] rtc_cmos 00:02: RTC can wake from S4
[    1.482738] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.482819] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.482824] intel_pstate: Intel P-state driver initializing
[    1.483577] intel_pstate: HWP enabled
[    1.483827] ledtrig-cpu: registered to indicate activity on CPUs
[    1.483866] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.484006] NET: Registered protocol family 10
[    1.487744] Segment Routing with IPv6
[    1.487756] NET: Registered protocol family 17
[    1.488669] RAS: Correctable Errors collector initialized.
[    1.488723] microcode: sig=0x506e3, pf=0x20, revision=0xba
[    1.489073] microcode: Microcode Update Driver: v2.2.
[    1.489079] sched_clock: Marking stable (1489071052, 0)->(1503277463, -14206411)
[    1.489403] registered taskstats version 1
[    1.489407] Loading compiled-in X.509 certificates
[    1.489416] zswap: loaded using pool lzo/zbud
[    1.490483]   Magic number: 5:704:124
[    1.490655] rtc_cmos 00:02: setting system clock to 2017-10-06 11:08:32 UTC (1507288112)
[    1.491146] PM: Hibernation image not present or could not be loaded.
[    1.492047] Freeing unused kernel memory: 1328K
[    1.492048] Write protecting the kernel read-only data: 10240k
[    1.492501] Freeing unused kernel memory: 1576K
[    1.492634] Freeing unused kernel memory: 12K
[    1.540861] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.542863] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.542904] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.556795] ACPI: bus type USB registered
[    1.556811] usbcore: registered new interface driver usbfs
[    1.556818] usbcore: registered new interface driver hub
[    1.556879] usbcore: registered new device driver usb
[    1.557160] rtsx_pci 0000:06:00.0: enabling device (0000 -> 0002)
[    1.557298] SCSI subsystem initialized
[    1.558157] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.558161] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.558448] libata version 3.00 loaded.
[    1.559379] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.559384] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.559593] hub 1-0:1.0: USB hub found
[    1.559621] hub 1-0:1.0: 16 ports detected
[    1.560938] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.560940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.561051] hub 2-0:1.0: USB hub found
[    1.561084] hub 2-0:1.0: 8 ports detected
[    1.561390] ahci 0000:00:17.0: version 3.0
[    1.561682] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.561684] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.562957] AVX2 version of gcm_enc/dec engaged.
[    1.562958] AES CTR mode by8 optimization enabled
[    1.570288] scsi host0: ahci
[    1.570386] scsi host1: ahci
[    1.570414] ata1: SATA max UDMA/133 abar m2048@0xdf433000 port 0xdf433100 irq 124
[    1.570418] ata2: SATA max UDMA/133 abar m2048@0xdf433000 port 0xdf433180 irq 124
[    1.584533] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.880188] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.881597] ata1: SATA link down (SStatus 4 SControl 300)
[    1.885129] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.235700] ata2.00: ATA-8: TOSHIBA MQ02ABD100H, HEF01D, max UDMA/100
[    2.235705] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.239617] ata2.00: configured for UDMA/100
[    2.240214] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MQ02ABD1 1D   PQ: 0 ANSI: 5
[    2.280681] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.280685] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    2.280808] sd 1:0:0:0: [sda] Write Protect is off
[    2.280812] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.281054] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.286313]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    2.287630] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.303430] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    2.465561] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    2.480262] clocksource: Switched to clocksource tsc
[    2.632767] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.636478] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    2.636610] systemd[1]: Detected architecture x86-64.
[    2.639257] systemd[1]: Set hostname to <lina>.
[    2.779245] systemd[1]: Reached target Remote File Systems.
[    2.779400] systemd[1]: Listening on udev Kernel Socket.
[    2.779858] systemd[1]: Created slice System Slice.
[    2.780415] systemd[1]: Mounting Huge Pages File System...
[    2.780988] systemd[1]: Mounting Kernel Debug File System...
[    2.781084] systemd[1]: Reached target Login Prompts.
[    2.788259] systemd[1]: Listening on Process Core Dump Socket.
[    2.797618] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    2.847661] systemd-journald[215]: Received request to flush runtime journal from PID 1
[    2.848366] vboxdrv: loading out-of-tree module taints kernel.
[    2.849660] vboxdrv: Found 8 processor cores
[    2.867154] vboxdrv: TSC mode is Invariant, tentative frequency 2591993200 Hz
[    2.867156] vboxdrv: Successfully loaded version 5.1.28 (interface 0x002a0000)
[    2.869774] VBoxPciLinuxInit
[    2.876235] vboxpci: IOMMU found
[    2.940596] VBoxNetAdp: Successfully started.
[    2.943179] VBoxNetFlt: Successfully started.
[    3.093386] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[    3.180360] input: DELL Wireless hotkeys as /devices/virtual/input/input2
[    3.254798] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.257919] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.257963] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.259569] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.259584] ACPI: Sleep Button [SLPB]
[    3.259657] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    3.259666] ACPI: Power Button [PWRB]
[    3.261121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.310355] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    3.334513] hidraw: raw HID events driver (C) Jiri Kosina
[    3.350889] ACPI: Battery Slot [BAT0] (battery present)
[    3.350978] ACPI: AC Adapter [ADP1] (on-line)
[    3.363725] ACPI: Lid Switch [LID0]
[    3.363779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    3.363809] ACPI: Power Button [PWRF]
[    3.363893] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    3.364009] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    3.413930] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.436680] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.457922] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.457964] thermal LNXTHERM:00: registered as thermal_zone2
[    3.457964] ACPI: Thermal Zone [TZ00] (28 C)
[    3.458049] thermal LNXTHERM:01: registered as thermal_zone3
[    3.458049] ACPI: Thermal Zone [TZ01] (30 C)
[    3.474485] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.493268] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.514336] Bluetooth: Core ver 2.22
[    3.514345] NET: Registered protocol family 31
[    3.514345] Bluetooth: HCI device and connection manager initialized
[    3.514347] Bluetooth: HCI socket layer initialized
[    3.514348] Bluetooth: L2CAP socket layer initialized
[    3.514351] Bluetooth: SCO socket layer initialized
[    3.536023] random: crng init done
[    3.539012] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.540046] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.540047] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.540047] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.540048] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.540048] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.540048] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.554753] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.577872] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.577879] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.587641] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffbd8cc0e11000, f4:8e:38:e9:b5:e6, XID 10900880 IRQ 318
[    3.587643] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.588684] Intel(R) Wireless WiFi driver for Linux
[    3.588684] Copyright(c) 2003- 2015 Intel Corporation
[    3.588912] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
[    3.635719] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.705234] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    3.714093] iwlwifi 0000:05:00.0: loaded firmware version 29.541020.0 op_mode iwlmvm
[    3.726544] iTCO_vendor_support: vendor-support=0
[    3.728150] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.728179] Bluetooth: HCI UART driver ver 2.3
[    3.728182] Bluetooth: HCI UART protocol H4 registered
[    3.728183] Bluetooth: HCI UART protocol BCSP registered
[    3.728223] Bluetooth: HCI UART protocol LL registered
[    3.728224] Bluetooth: HCI UART protocol ATH3K registered
[    3.728225] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.728291] Bluetooth: HCI UART protocol Intel registered
[    3.728306] Bluetooth: HCI UART protocol Broadcom registered
[    3.728307] Bluetooth: HCI UART protocol QCA registered
[    3.728307] Bluetooth: HCI UART protocol AG6XX registered
[    3.728308] Bluetooth: HCI UART protocol Marvell registered
[    3.728434] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.728587] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.736756] [drm] Memory usable by graphics device = 4096M
[    3.736757] [drm] VT-d active for gfx access
[    3.736759] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
[    3.736760] fb: switching to inteldrmfb from EFI VGA
[    3.736819] Console: switching to colour dummy device 80x25
[    3.736884] [drm] Replacing VGA console driver
[    3.737109] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    3.742051] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.742052] [drm] Driver supports precise vblank timestamp query.
[    3.749002] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
[    3.749252] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.750819] hid-multitouch 0018:04F3:3012.0001: Ignoring the extra HID_DG_INPUTMODE
[    3.750858] input: ELAN1010:00 04F3:3012 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1010:00/0018:04F3:3012.0001/input/input11
[    3.750898] hid-multitouch 0018:04F3:3012.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1010:00 04F3:3012] on i2c-ELAN1010:00
[    3.754410] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    3.773327] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    3.775727] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.775907] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.776297] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    3.776738] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    3.776768] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/LNXVIDEO:01/input/input13
[    3.776914] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.776915] dell_wmi: Detected Dell WMI interface version 0
[    3.776988] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[    3.778450] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    3.787748] fbcon: inteldrmfb (fb0) is primary device
[    3.789204] mousedev: PS/2 mouse device common for all mice
[    3.797987] iwlwifi 0000:05:00.0: base HW address: b8:81:98:82:e3:d0
[    3.853938] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=2 (0x14/0x1b/0x0/0x0/0x0) type:speaker
[    3.853943] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.853948] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.853951] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.853953] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.853958] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    3.853962] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    3.853966] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.890483] media: Linux media interface: v0.10
[    3.903193] Linux video capture interface: v2.00
[    3.903733] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.904201] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.904234] thermal thermal_zone7: failed to read out thermal zone (-5)
[    3.950676] usbcore: registered new interface driver btusb
[    3.955212] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
[    3.960798] intel_rapl: Found RAPL domain package
[    3.960801] intel_rapl: Found RAPL domain core
[    3.960803] intel_rapl: Found RAPL domain uncore
[    3.960806] intel_rapl: Found RAPL domain dram
[    3.965515] Bluetooth: hci0: read Intel version: 370810011003110e25
[    3.965517] Bluetooth: hci0: Intel device is already patched. patch num: 25
[    4.000265] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b8a)
[    4.004152] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.006430] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.006702] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.006851] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    4.006983] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    4.007097] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    4.007221] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    4.009210] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[    4.009214] uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
[    4.009216] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[    4.009218] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[    4.009349] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input22
[    4.009466] usbcore: registered new interface driver uvcvideo
[    4.009467] USB Video Class driver (1.1.1)
[    4.851798] Console: switching to colour frame buffer device 240x67
[    4.875025] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.899373] Adding 8388604k swap on /dev/sda5.  Priority:-1 extents:1 across:8388604k FS
[    5.357108] [drm] RC6 on
[    5.521890] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.539001] r8169 0000:04:00.0 enp4s0: link down
[    5.539096] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    5.545695] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.658924] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.781972] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    5.985711] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[    6.722531] nvidia: module license 'NVIDIA' taints kernel.
[    6.722533] Disabling lock debugging due to kernel taint
[    6.732583] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[    6.732830] nvidia 0000:02:00.0: enabling device (0006 -> 0007)
[    6.733021] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  387.12  Thu Sep 28 20:18:48 PDT 2017 (using threaded interrupts)
[    9.741258] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   10.835606] wlp5s0: authenticate with c8:3a:35:4c:e8:28
[   10.842943] wlp5s0: send auth to c8:3a:35:4c:e8:28 (try 1/3)
[   10.846639] wlp5s0: authenticated
[   10.850089] wlp5s0: associate with c8:3a:35:4c:e8:28 (try 1/3)
[   10.853516] wlp5s0: RX AssocResp from c8:3a:35:4c:e8:28 (capab=0x411 status=0 aid=3)
[   10.856098] wlp5s0: associated
[   10.856156] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   17.275197] fuse init (API version 7.26)
[   34.147202] [UFW BLOCK] IN=wlp5s0 OUT= MAC=b8:81:98:82:e3:d0:c8:3a:35:4c:e8:28:08:00 SRC=34.213.33.143 DST=192.168.0.103 LEN=87 TOS=0x00 PREC=0x00 TTL=225 ID=48909 DF PROTO=TCP SPT=443 DPT=56270 WINDOW=114 RES=0x00 ACK PSH URGP=0

Last edited by k.somoykhan (2017-10-06 19:13:33)

k.somoykhan · 2017-10-06 19:03:33

bootctl status : 
Using EFI System Partition at /boot.
System:
     Firmware: UEFI 2.40 (American Megatrends 5.11)
  Secure Boot: disabled
   Setup Mode: user

Current Loader:
      Product: systemd-boot 234
          ESP: /dev/disk/by-partuuid/bc1293fb-ba83-4a42-98f5-56f1a261d065
         File: └─/EFI/systemd/systemd-bootx64.efi

Boot Loader Binaries:
          ESP: /boot
         File: └─/EFI/systemd/systemd-bootx64.efi (systemd-boot 234)
         File: └─/EFI/BOOT/bootx64.efi (systemd-boot 234)

Boot Loader Entries in EFI Variables:
        Title: Linux Boot Manager
           ID: 0x0001
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/bc1293fb-ba83-4a42-98f5-56f1a261d065
         File: └─/EFI/systemd/systemd-bootx64.efi

        Title: Windows Boot Manager
           ID: 0x0000
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/bc1293fb-ba83-4a42-98f5-56f1a261d065
         File: └─/EFI/Microsoft/Boot/bootmgfw.efi

Last edited by k.somoykhan (2017-10-06 19:14:11)

WorMzy · 2017-10-06 19:09:11

Welcome to the Arch Linux forums, k.somoykhan. Please edit your topic title to remove the superfluous cry for help and unneccessary exclamation marks. Then edit your second and third posts to use code tags.

https://wiki.archlinux.org/index.php/Co … ow_to_post
https://wiki.archlinux.org/index.php/Co … s_and_code

Finally, please read the rest of the Code of Conduct, and be sure to follow it in future posts. Thanks. This includes not bumping your topic unnecessarilly -- use the edit button to append further information to your post if you are the last person to post.

Once you have done this, please provide more information about how you installed Arch. You are using some pretty exotic boot options, did you need these to boot the liveCD in the first place?

Slithery · 2017-10-06 19:09:40

Welcome to the forums k.somoykhan

Please read the forum Code of Conduct, especially the part about posting commands and their outputs in [⁣code] [⁣/code] tags.
https://wiki.archlinux.org/index.php/Co … s_and_code

k.somoykhan · 2017-10-06 19:18:27

WorMzy wrote:

Welcome to the Arch Linux forums, k.somoykhan. Please edit your topic title to remove the superfluous cry for help and unneccessary exclamation marks. Then edit your second and third posts to use code tags.
https://wiki.archlinux.org/index.php/Co … ow_to_post
https://wiki.archlinux.org/index.php/Co … s_and_code
Finally, please read the rest of the Code of Conduct, and be sure to follow it in future posts. Thanks. This includes not bumping your topic unnecessarilly -- use the edit button to append further information to your post if you are the last person to post.
Once you have done this, please provide more information about how you installed Arch. You are using some pretty exotic boot options, did you need these to boot the liveCD in the first place?

Thanks

No i didnt need those boot options to boot into the live cd those were prior to bumblebee installation in 960m,
https://wiki.archlinux.org/index.php/bumblebee see the Lockup issue (lspci hangs) , but right now bumblebee is turned off, i tried removing those options but the result is same.

partitioning of my arch installation (GPT/UEFI):

Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 712FCB9F-BAE2-4A24-B92F-B95FFAEF264E

Device          Start        End   Sectors   Size Type
/dev/sda1        2048     923647    921600   450M Windows recovery environment
/dev/sda2      923648    1128447    204800   100M EFI System
/dev/sda3     1128448    1161215     32768    16M Microsoft reserved
/dev/sda4     1161216  411379711 410218496 195.6G Microsoft basic data
/dev/sda5   411379712  428156927  16777216     8G Linux swap
/dev/sda6   428156928  847587327 419430400   200G Linux filesystem
/dev/sda7   847587328 1057302527 209715200   100G Microsoft basic data
/dev/sda8  1057302528 1953525134 896222607 427.4G Microsoft basic data

screenfetch :

                   -`                 
                  .o+`                 thesorryguy@lina
                 `ooo/                 OS: Arch Linux 
                `+oooo:                Kernel: x86_64 Linux 4.13.3-1-ARCH
               `+oooooo:               Uptime: 1h 15m
               -+oooooo+:              Packages: 777
             `/:-:++oooo+:             Shell: bash 4.4.12
            `/++++/+++++++:            Resolution: 1920x1080
           `/++++++++++++++:           DE: GNOME 
          `/+++ooooooooooooo/`         WM: GNOME Shell
         ./ooosssso++osssssso+`        WM Theme: Adapta-Eta
        .oossssso-````/ossssss+`       GTK Theme: Adapta-Eta [GTK2/3]
       -osssssso.      :ssssssso.      Icon Theme: Paper
      :osssssss/        osssso+++.     Font: Cantarell 11
     /ossssssss/        +ssssooo/-     CPU: Intel Core i7-6700HQ @ 8x 3.5GHz [56.5°C]
   `/ossssso+/:-        -:/+osssso+-   GPU: GeForce GTX 960M
  `+sso+:-`                 `.-/+oso:  RAM: 1656MiB / 7924MiB
 `++:.                           `-/+/
 .`                                 `/

Last edited by k.somoykhan (2017-10-06 19:24:43)

Slithery · 2017-10-06 19:34:19

systemctl reboot --firmware-setup

Should reboot into your firmware menu.

Last edited by Slithery (2017-10-06 19:36:38)

k.somoykhan · 2017-10-06 19:42:27

slithery wrote:

systemctl reboot --firmware-setup

reboots and screen flashed for half a second and screen turned off (like what happens when i reboot) and stayed like that for a minute, forced turned off through the power switch and rebooted. straight booted into arch. it didnt load the bios setup as it should, or maybe it did but the screen stayed black. when it boots and i press my boot options key (F12) and tinker arrows i can boot into windows too. it seems like just the screen stays blank in the boot process.

on Windows i flashed the bios today hoping to fix the issue. It seemed to have installed normally (though i couldnt see because the display was off while installing it too) but no luck.

Last edited by k.somoykhan (2017-10-06 19:59:29)

seth · 2017-10-06 20:37:48

Tried to attach monitors to the external video ports (VGA/HDMI/DP/DVI)?
I doubt installing virtualbox caused this - smells more like a bad UEFI patch (and would rather be caused by a windows update?)

k.somoykhan · 2017-10-06 21:38:50

seth wrote:

Tried to attach monitors to the external video ports (VGA/HDMI/DP/DVI)?
I doubt installing virtualbox caused this - smells more like a bad UEFI patch (and would rather be caused by a windows update?)

yes tried with HDMI, it also shows screen when arch or windows boots up, no screen of BIOS. i didnt do any windows update, virtualbox might have caused. what can I do now?

k.somoykhan · 2017-10-06 23:26:29

Can the video in bios got turned off somehow? Is there any workaround to check?

seth · 2017-10-07 07:32:16

I doubt so, but even if: resetting CMOS/BIOS/NVRM on a notebook where you can't see anything is going to be quite a challenge.
For a start: completely unpower it (remove the AC and battery for some time, maybe overnight) and hope for the best.

Do you see the Dell logo? Can you enter BIOS by pressing F2 while the system starts?
Do you get a grub screen when forcing a VGA console?
https://wiki.archlinux.org/index.php/GR … ramebuffer

GRUB_TERMINAL_OUTPUT=console

(don't forget to update grub)

Again: there's hardly a chance that this was caused by any interaction with archlinux, so even if you're lookig for help here, try to remember what else happened around the time when this started being a problem.

k.somoykhan · 2017-10-07 15:45:16

seth wrote:

I doubt so, but even if: resetting CMOS/BIOS/NVRM on a notebook where you can't see anything is going to be quite a challenge.
For a start: completely unpower it (remove the AC and battery for some time, maybe overnight) and hope for the best.
Do you see the Dell logo? Can you enter BIOS by pressing F2 while the system starts?
Do you get a grub screen when forcing a VGA console?
https://wiki.archlinux.org/index.php/GR … ramebuffer
GRUB_TERMINAL_OUTPUT=console
(don't forget to update grub)
Again: there's hardly a chance that this was caused by any interaction with archlinux, so even if you're lookig for help here, try to remember what else happened around the time when this started being a problem.

i'm not using grub, i'm using systemd-boot/bootctl, no dell logo, cannot get into the bios pressing F2 (i mean it goes into bios but the screen stays off), my battery is internal and i cant see the bootctl menu. maybe i should send it to servicing center and have them reset the bios?

seth · 2017-10-07 19:29:03

If that's no problem (you'll loose access to the device and they may nuke your disk as well...)
You could still try to run the battery out. *shrug*
If there's still warranty, I'd suggest to NOT open the device (because then your warranty is likely gone)

k.somoykhan · 2017-10-07 20:15:58

seth wrote:

If that's no problem (you'll loose access to the device and they may nuke your disk as well...)
You could still try to run the battery out. *shrug*
If there's still warranty, I'd suggest to NOT open the device (because then your warranty is likely gone)

Can it further damage happen if i carry on the device using like that? Since I ran the dell device tests and everything seemed fine, both arch and windows system works flawlessly, but I'm afraid to use any virtualization technology from now on, since those interacts with my bios so much.

seth · 2017-10-07 21:18:14

Installing virtualbox did not cause this.
Something™ has either altered the EFI or somehow™ affected the nvrm of your IGP/GPU.
The two things in linux that reach at least *near* such are installing the bootloader and the i915 driver.

As for i915, I'd say a windows boot would clear that.

As for EFI: welcome to the world of wonders where the userspace can brick your HW - it's a crap-design to ensure Joe User can update his board by clicking on a webpage.
Hoewever I don't see where installing / using virtualbox would be prone to such action.

k.somoykhan · 2017-10-09 21:48:31

seth wrote:

Installing virtualbox did not cause this.
Something™ has either altered the EFI or somehow™ affected the nvrm of your IGP/GPU.
The two things in linux that reach at least *near* such are installing the bootloader and the i915 driver.
As for i915, I'd say a windows boot would clear that.
As for EFI: welcome to the world of wonders where the userspace can brick your HW - it's a crap-design to ensure Joe User can update his board by clicking on a webpage.
Hoewever I don't see where installing / using virtualbox would be prone to such action.

do you see any abnormality in my dmesg log? Is there a way I can get back to MBR/Legacy and change my bootloader? As I get no screen for my bios settings I cannot boot into any USB drives as well.

seth · 2017-10-10 07:30:56

Quite on the contrary:

[    1.473298] efifb: probing for efifb
[    1.473307] efifb: framebuffer at 0xb0000000, using 8100k, total 8100k
[    1.473308] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.473308] efifb: scrolling: redraw
[    1.473309] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.477063] Console: switching to colour frame buffer device 240x67
[    1.480671] fb0: EFI VGA frame buffer device

Looks much like the linux console is successfully using your EFI fb device.
You may try booting with "intel_iommu=off" as kernel parameter (for it's the cause of a lot of weird things, but I'd be stunned if it also could break your EFI)
Changing your bootloader will hardly get you back into the BIOS settings and switching that to legacy mode will expectably break your windows boot.

You could attempt explicit BIOS downgrades from windows, but I'd archive all personal data before messing the system into a state where it gets virtually inaccessible.

cfr · 2017-10-11 01:49:36

You should be able to disable the internal battery. There must be a mechanism for this because anybody opening up your laptop needs to disable it to avoid getting shocked. Is there a hardware manual or similar for the laptiop? It should include instructions if any user-configurable parts are inside the machine. For example, my laptop has an internal battery and the manual includes instructions for disabling it. I haven't tried it, but I assume they must work because the liability would otherwise be enormous. (The manufacturer would have to recall any model where they failed, I'd assume.)

ewaller · 2017-10-11 02:02:22

cfr wrote:

You should be able to disable the internal battery. There must be a mechanism for this because anybody opening up your laptop needs to disable it to avoid getting shocked.

Nonsense.

seth · 2017-10-11 07:59:35

I recall those terrible 12V shocks we were forced to endure in elementary school.
We were tortured and made to touch the contacts with our tongue.
...
AND I'M NOT TOLERANT TO TICKLE!

-----------

On Topic:
The realistic hardware feature to reset BIOS/CMOS/NVRM is some magic key combination, but I checked the dell support page and they didn't mention such :-(
The best thing you could hope for is that they provide such feature with their windows drivers.

cfr · 2017-10-12 02:01:55

ewaller wrote:

cfr wrote:
You should be able to disable the internal battery. There must be a mechanism for this because anybody opening up your laptop needs to disable it to avoid getting shocked.
Nonsense.

Maybe must is too strong, but there is certainly a good chance there is such a method. If the OEM regards anything inside as consumer-replaceable, there may well be such an option.

ewaller · 2017-10-12 02:57:22

Below 48VDC, there is no risk of shock, and no regulatory requirement for safety with regards to shock. Yes, a short could create a hazard for fire because of the stored energy. Not a shock hazard. I have never seen any mechanism for providing a service disconnect inside any laptop or tablet. It is not like a laptop is a Tesla or a Prius; those vehicles have lethal voltages on their batteries; and they do have service disconnects. And they have LEDs on their power cables to indicate when they are hot.

As to laptops, they universally have DC voltages below 20V. As Seth points out, you would be hating life if you put your tongue on that; but you will never feel it in your hands. I can *just* barely feel 48VDC on the skin on the inside of my wrists. My fingers, forget it.

Of course, a tool strike across a battery could be catastrophic without a current limit device. A lithium ion battery will delver 10's of Amperes into such a short. Double plus ungood.

Last edited by ewaller (2017-10-12 02:58:30)

cfr · 2017-10-12 04:00:39

Then the warnings may be unnecessary, but it doesn't change the fact that the manufacturer may well provide a means to disable the internal battery, even if they are incorrect in claiming that there is a safety reason to use this feature before opening the machine. Why ever they provide it, however, it should still be possible to use it to cut power to the laptop.

Arch Linux

#1 2017-10-06 18:59:53

No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#2 2017-10-06 19:02:33

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#3 2017-10-06 19:03:33

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#4 2017-10-06 19:09:11

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#5 2017-10-06 19:09:40

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#6 2017-10-06 19:18:27

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#7 2017-10-06 19:34:19

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#8 2017-10-06 19:42:27

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#9 2017-10-06 20:37:48

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#10 2017-10-06 21:38:50

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#11 2017-10-06 23:26:29

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#12 2017-10-07 07:32:16

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#13 2017-10-07 15:45:16

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#14 2017-10-07 19:29:03

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#15 2017-10-07 20:15:58

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#16 2017-10-07 21:18:14

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#17 2017-10-09 21:48:31

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#18 2017-10-10 07:30:56

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#19 2017-10-11 01:49:36

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#20 2017-10-11 02:02:22

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#21 2017-10-11 07:59:35

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#22 2017-10-12 02:01:55

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#23 2017-10-12 02:57:22

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

#24 2017-10-12 04:00:39

Re: No BIOS option and bootctl menu (dell inspiron7559-BIOS:1.2.4)

Board footer