You are not logged in.
Hi,
I had sound on my laptop until a few days ago when I added myself to the audio group to allow me run `hwclock` without having to enter my password each time. Shortly after that I rebooted my laptop and since then I don't hear any sound whatsoever when I play music or video. When this happened I removed myself from the audio group but still no sound. I have followed many suggestions from several online searches without success so I eventually reinstalled Arch afresh.
After the fresh install, first time I played music I got sound for about 3 to 5 seconds and then it stopped. I have tried all I could but I am unable to get sound working. Please kindly help me.
PS:
I am running Cinnamon desktop. The output of alsa-info.sh is at http://www.alsa-project.org/db/?f=0321f … e7edcf2e07, the text is too long so I only include the link but I'll be glad to provide more info if necessary.
Offline
Post
sudo fuser -v /dev/snd/*
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs
wihle attempting to play something
Online
@V1del thanks for your reply. Here is the output of the commands as requested.
➜ ~ sudo fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: abraham 708 F.... pulseaudio
/dev/snd/controlC1: abraham 708 F.... pulseaudio
/dev/snd/pcmC1D0p: abraham 708 F...m pulseaudio
#######################################################################################################################
➜ ~ pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_03.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xf7e14000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
#################################################################################################################
➜ ~ pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 39.76 ms
max request: 6 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VB Analog"
alsa.id = "ALC269VB Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269VB"
alsa.components = "HDA:10ec0269,15585496,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
#############################################################################################################################
➜ ~ pacmd list-sink-inputs
1 sink input(s) available.
index: 1
driver: <protocol-native.c>
flags: START_CORKED FIX_RATE
state: RUNNING
sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: front-left: 81920 / 125% / 5.81 dB, front-right: 81920 / 125% / 5.81 dB
balance 0.00
muted: no
current latency: 853.70 ms
requested latency: 40.00 ms
sample spec: float32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 12
client: 10 <VLC media player (LibVLC 2.2.6)>
properties:
media.role = "video"
media.name = "audio stream"
application.name = "VLC media player (LibVLC 2.2.6)"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.VideoLAN.VLC"
application.version = "2.2.6"
application.icon_name = "vlc"
application.language = "en_US.UTF-8"
application.process.id = "1334"
application.process.user = "abraham"
application.process.host = "webscale"
application.process.binary = "vlc"
window.x11.display = ":0"
application.process.machine_id = "fed2f6c6b7874ab9a41b0624ec582a8b"
application.process.session_id = "c2"
module-stream-restore.id = "sink-input-by-media-role:video"
Offline
All of that looks correct, might be an iommu issue, can you share a dmesg?
Online
All of that looks correct, might be an iommu issue, can you share a dmesg?
Thanks @V1del, below is the output from dmesg.
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2017-01-27
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.3-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d5fa4e49-5505-4323-828d-05f8e5586f93 rw quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c920afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c920b000-0x00000000c9211fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9212000-0x00000000c9a19fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9a1a000-0x00000000c9cb1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9cb2000-0x00000000d94dcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d94dd000-0x00000000d9815fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9816000-0x00000000d9882fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9883000-0x00000000d99bcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d99bd000-0x00000000d9f80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f81000-0x00000000d9ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xd9f7f998 ACPI 2.0=0xd9987000 ACPI=0xd9987000 SMBIOS=0xd9f7f598
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Zinox Technologies Ltd W54_W550SU2 /W54_W550SU2 , BIOS 4.6.5 05/27/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FE0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 5 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 019FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000d9f7f998 to 0x00000000d9f7f9d0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9da540098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x6ed5e000, 0x6ed5efff] PGTABLE
[ 0.000000] BRK [0x6ed5f000, 0x6ed5ffff] PGTABLE
[ 0.000000] BRK [0x6ed60000, 0x6ed60fff] PGTABLE
[ 0.000000] BRK [0x6ed61000, 0x6ed61fff] PGTABLE
[ 0.000000] BRK [0x6ed62000, 0x6ed62fff] PGTABLE
[ 0.000000] BRK [0x6ed63000, 0x6ed63fff] PGTABLE
[ 0.000000] BRK [0x6ed64000, 0x6ed64fff] PGTABLE
[ 0.000000] BRK [0x6ed65000, 0x6ed65fff] PGTABLE
[ 0.000000] BRK [0x6ed66000, 0x6ed66fff] PGTABLE
[ 0.000000] BRK [0x6ed67000, 0x6ed67fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36be3000-0x375e8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D9987000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D9987088 00008C (v01 ZINOX ZINOXPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D9998B10 00010C (v05 ZINOX ZINOXPC 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D99871A8 011965 (v02 ZINOX ZINOXPC 00000029 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000D99BB080 000040
[ 0.000000] ACPI: APIC 0x00000000D9998C20 000072 (v03 ZINOX ZINOXPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D9998C98 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000D9998CE0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SLIC 0x00000000D9998D88 000176 (v01 ZINOX ZINOXPC 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000D9998F00 00005C (v01 ZINOX ZINOXPC 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D9998F60 002028 (v01 ZINOX ZINOXPC 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D999AF88 000539 (v01 ZINOX ZINOXPC 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D999B4C8 000AD8 (v01 ZINOX ZINOXPC 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000D999BFA0 00003C (v01 ZINOX ZINOXPC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D999BFE0 000038 (v01 ZINOX ZINOXPC 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D999C018 000315 (v01 ZINOX ZINOXPC 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D999C330 003633 (v01 ZINOX ZINOXPC 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x19fdf9000-0x19fdfdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000019fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c920afff]
[ 0.000000] node 0: [mem 0x00000000c9212000-0x00000000c9a19fff]
[ 0.000000] node 0: [mem 0x00000000c9cb2000-0x00000000d94dcfff]
[ 0.000000] node 0: [mem 0x00000000d9816000-0x00000000d9882fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000019fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019fdfffff]
[ 0.000000] On node 0 totalpages: 1544264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13835 pages used for memmap
[ 0.000000] DMA32 zone: 885420 pages, LIFO batch:31
[ 0.000000] Normal zone: 10232 pages used for memmap
[ 0.000000] Normal zone: 654848 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc920b000-0xc9211fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9a1a000-0xc9cb1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd94dd000-0xd9815fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9883000-0xd99bcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd99bd000-0xd9f80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f81000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9da6dfa00000 s106520 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1520111
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d5fa4e49-5505-4323-828d-05f8e5586f93 rw quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5947080K/6177056K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 229976K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28108 entries in 110 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2593.967 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.09 BogoMIPS (lpj=8646556)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.013625] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.014093] Security Framework initialized
[ 0.014094] Yama: becoming mindful.
[ 0.015236] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015804] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015830] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015848] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015999] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 0
[ 0.016004] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016004] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016008] mce: CPU supports 7 MCE banks
[ 0.016015] CPU0: Thermal monitoring enabled (TM1)
[ 0.016024] process: using mwait in idle threads
[ 0.016026] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.016027] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.016590] Freeing SMP alternatives memory: 24K
[ 0.023621] smpboot: Max logical packages: 2
[ 0.024206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057215] TSC deadline timer enabled
[ 0.057217] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.070017] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.070045] ... version: 3
[ 0.070045] ... bit width: 48
[ 0.070046] ... generic registers: 4
[ 0.070046] ... value mask: 0000ffffffffffff
[ 0.070047] ... max period: 00007fffffffffff
[ 0.070047] ... fixed-purpose events: 3
[ 0.070048] ... event mask: 000000070000000f
[ 0.076682] Hierarchical SRCU implementation.
[ 0.090070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096681] smp: Bringing up secondary CPUs ...
[ 0.123356] x86: Booting SMP configuration:
[ 0.123357] .... node #0, CPUs: #1 #2 #3
[ 0.426682] smp: Brought up 1 node, 4 CPUs
[ 0.426682] smpboot: Total of 4 processors activated (20764.33 BogoMIPS)
[ 0.430193] devtmpfs: initialized
[ 0.430193] x86/mm: Memory block size: 128MB
[ 0.430391] PM: Registering ACPI NVS region [mem 0xc920b000-0xc9211fff] (28672 bytes)
[ 0.430391] PM: Registering ACPI NVS region [mem 0xd9883000-0xd99bcfff] (1286144 bytes)
[ 0.430391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.430391] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.430391] pinctrl core: initialized pinctrl subsystem
[ 0.430391] RTC time: 11:16:06, date: 10/04/17
[ 0.430391] NET: Registered protocol family 16
[ 0.430391] cpuidle: using governor ladder
[ 0.430391] cpuidle: using governor menu
[ 0.430391] PCCT header not found.
[ 0.430391] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.430391] ACPI: bus type PCI registered
[ 0.430391] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.430391] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.430391] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.430391] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.430391] PCI: Using configuration type 1 for base access
[ 0.430391] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.430706] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.430706] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.430706] ACPI: Added _OSI(Module Device)
[ 0.430706] ACPI: Added _OSI(Processor Device)
[ 0.430706] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.430706] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.430706] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.435344] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.437046] ACPI: Dynamic OEM Table Load:
[ 0.437046] ACPI: SSDT 0xFFFF9DA6D7C6DC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.437046] ACPI: Dynamic OEM Table Load:
[ 0.437046] ACPI: SSDT 0xFFFF9DA6D832C000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.437065] ACPI: Dynamic OEM Table Load:
[ 0.437065] ACPI: SSDT 0xFFFF9DA6D7D32C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.437274] ACPI: EC: EC started
[ 0.437274] ACPI: EC: interrupt blocked
[ 0.437420] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.437420] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.437420] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.437420] ACPI: Interpreter enabled
[ 0.437420] ACPI: (supports S0 S3 S4 S5)
[ 0.437420] ACPI: Using IOAPIC for interrupt routing
[ 0.437420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.446666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.446666] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.446666] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.446666] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.446666] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.446666] PCI host bridge to bus 0000:00
[ 0.446666] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.446666] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.446666] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.446666] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.446666] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.446666] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.446666] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.446666] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.446666] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.446666] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.446666] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.446666] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.446666] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.446666] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.446666] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.446666] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit]
[ 0.446666] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.446666] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.446666] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.446671] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.446736] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.446791] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.446882] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.446939] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.447028] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.447085] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.447177] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.447195] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.447268] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.447333] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.447491] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.447504] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.447509] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.447514] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.447519] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.447524] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.447530] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.447556] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.447612] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.447626] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.447641] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.447753] acpiphp: Slot [1] registered
[ 0.447756] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.447815] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 0.447843] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.447865] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit]
[ 0.447961] pci 0000:02:00.0: supports D1 D2
[ 0.447962] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.463376] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.463379] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.463382] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.463458] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[ 0.463485] pci 0000:03:00.0: reg 0x10: [mem 0xf7c15000-0xf7c15fff]
[ 0.463530] pci 0000:03:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[ 0.463614] pci 0000:03:00.0: supports D1 D2
[ 0.463615] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.463700] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[ 0.463729] pci 0000:03:00.1: reg 0x10: [io 0xd000-0xd0ff]
[ 0.463756] pci 0000:03:00.1: reg 0x18: [mem 0xf7c14000-0xf7c14fff 64bit]
[ 0.463773] pci 0000:03:00.1: reg 0x20: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.463862] pci 0000:03:00.1: supports D1 D2
[ 0.463863] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.476696] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.476699] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.476702] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.477848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.477898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.477944] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.477990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.478036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.478081] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.478127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.478174] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.478432] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.478472] ACPI: EC: interrupt unblocked
[ 0.478479] ACPI: EC: event unblocked
[ 0.478486] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.478487] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.478533] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.478533] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.478533] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.478533] vgaarb: loaded
[ 0.478533] EDAC MC: Ver: 3.0.0
[ 0.478533] Registered efivars operations
[ 0.485611] PCI: Using ACPI for IRQ routing
[ 0.486814] PCI: pci_cache_line_size set to 64 bytes
[ 0.486853] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.486854] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.486855] e820: reserve RAM buffer [mem 0xc920b000-0xcbffffff]
[ 0.486856] e820: reserve RAM buffer [mem 0xc9a1a000-0xcbffffff]
[ 0.486856] e820: reserve RAM buffer [mem 0xd94dd000-0xdbffffff]
[ 0.486858] e820: reserve RAM buffer [mem 0xd9883000-0xdbffffff]
[ 0.486859] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.486860] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
[ 0.486929] NetLabel: Initializing
[ 0.486930] NetLabel: domain hash size = 128
[ 0.486930] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.486943] NetLabel: unlabeled traffic allowed by default
[ 0.486954] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.486954] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.488941] clocksource: Switched to clocksource hpet
[ 0.493152] VFS: Disk quotas dquot_6.6.0
[ 0.493166] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.493229] pnp: PnP ACPI init
[ 0.493305] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.493308] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.493535] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.493537] system 00:01: [io 0xffff] has been reserved
[ 0.493538] system 00:01: [io 0xffff] has been reserved
[ 0.493538] system 00:01: [io 0xffff] has been reserved
[ 0.493539] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.493540] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.493541] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.493542] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.493543] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.493544] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.493545] system 00:01: [io 0x3322-0x3323] has been reserved
[ 0.493547] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.493563] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.493596] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.493598] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.493616] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.493782] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
[ 0.493815] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.493817] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.494091] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.494092] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.494093] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[ 0.494094] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.494095] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.494096] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.494097] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.494098] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.494392] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.494393] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.494394] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.494395] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.494396] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.494397] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.494398] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.494399] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.494400] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.494401] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.494402] system 00:08: [mem 0xf7fee000-0xf7feefff] has been reserved
[ 0.494403] system 00:08: [mem 0xf7fd0000-0xf7fdffff] has been reserved
[ 0.494405] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.494579] pnp: PnP ACPI: found 9 devices
[ 0.500218] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.500228] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.500230] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.500232] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.500248] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.500253] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.500255] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.500257] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.500258] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.500262] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.500264] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.500268] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.500269] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.500272] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.500278] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.500279] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.500282] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.500288] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.500289] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.500290] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.500291] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.500292] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.500293] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.500294] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.500295] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.500296] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.500296] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.500297] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.500298] pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff window]
[ 0.500299] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.500300] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.500301] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.500302] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.500302] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.500303] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.500304] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.500408] NET: Registered protocol family 2
[ 0.500520] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.500604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.500715] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.500739] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.500758] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.500797] NET: Registered protocol family 1
[ 0.500807] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.501083] PCI: CLS 64 bytes, default 64
[ 0.501110] Unpacking initramfs...
[ 0.616282] Freeing initrd memory: 10264K
[ 0.616287] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.616289] software IO TLB [mem 0xd2b4e000-0xd6b4e000] (64MB) mapped at [ffff9da612b4e000-ffff9da616b4dfff]
[ 0.616450] Scanning for low memory corruption every 60 seconds
[ 0.616855] Initialise system trusted keyrings
[ 0.616861] Key type blacklist registered
[ 0.616904] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.617648] zbud: loaded
[ 0.618094] Key type asymmetric registered
[ 0.618119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.618147] io scheduler noop registered
[ 0.618147] io scheduler deadline registered
[ 0.618166] io scheduler cfq registered (default)
[ 0.618167] io scheduler mq-deadline registered
[ 0.618167] io scheduler kyber registered
[ 0.618182] io scheduler bfq registered
[ 0.618578] efifb: probing for efifb
[ 0.618593] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.618594] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.618595] efifb: scrolling: redraw
[ 0.618596] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.620705] Console: switching to colour frame buffer device 170x48
[ 0.622433] fb0: EFI VGA frame buffer device
[ 0.622439] intel_idle: MWAIT substates: 0x11142120
[ 0.622440] intel_idle: v0.4.1 model 0x45
[ 0.622579] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.622669] GHES: HEST is not enabled!
[ 0.622724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.623067] Linux agpgart interface v0.103
[ 0.623276] rtc_cmos 00:02: RTC can wake from S4
[ 0.623396] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.623420] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.623429] intel_pstate: Intel P-state driver initializing
[ 0.623576] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.623665] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.624180] NET: Registered protocol family 10
[ 0.631870] Segment Routing with IPv6
[ 0.631918] NET: Registered protocol family 17
[ 0.632412] RAS: Correctable Errors collector initialized.
[ 0.632470] microcode: sig=0x40651, pf=0x40, revision=0x20
[ 0.632654] microcode: Microcode Update Driver: v2.2.
[ 0.632678] sched_clock: Marking stable (632636876, 0)->(631245578, 1391298)
[ 0.633142] registered taskstats version 1
[ 0.633163] Loading compiled-in X.509 certificates
[ 0.633193] zswap: loaded using pool lzo/zbud
[ 0.634032] Magic number: 5:210:276
[ 0.634061] tty tty13: hash matches
[ 0.634197] rtc_cmos 00:02: setting system clock to 2017-10-04 11:16:07 UTC (1507115767)
[ 0.635760] PM: Hibernation image not present or could not be loaded.
[ 0.638824] Freeing unused kernel memory: 1328K
[ 0.638827] Write protecting the kernel read-only data: 10240k
[ 0.639761] Freeing unused kernel memory: 1576K
[ 0.639875] Freeing unused kernel memory: 12K
[ 0.687851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.687874] ACPI: Power Button [PWRB]
[ 0.687912] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.687923] ACPI: Sleep Button [SLPB]
[ 0.688015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.688384] ACPI: Lid Switch [LID0]
[ 0.688443] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.688457] ACPI: Power Button [PWRF]
[ 0.695883] [drm] Memory usable by graphics device = 2048M
[ 0.695885] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 0.695886] fb: switching to inteldrmfb from EFI VGA
[ 0.695902] Console: switching to colour dummy device 80x25
[ 0.695980] [drm] Replacing VGA console driver
[ 0.701950] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.701951] [drm] Driver supports precise vblank timestamp query.
[ 0.703825] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.710910] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 0.712125] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.712378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.720206] fbcon: inteldrmfb (fb0) is primary device
[ 1.623390] tsc: Refined TSC clocksource calibration: 2593.994 MHz
[ 1.623399] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
[ 2.366256] Console: switching to colour frame buffer device 170x48
[ 2.384727] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.463204] sdhci: Secure Digital Host Controller Interface driver
[ 2.463205] sdhci: Copyright(c) Pierre Ossman
[ 2.465109] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[ 2.465182] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 2.466066] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[ 2.470347] i8042: Detected active multiplexing controller, rev 1.1
[ 2.471995] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.472048] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.472079] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.472108] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.472129] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.475397] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 2.475980] ACPI: bus type USB registered
[ 2.475995] usbcore: registered new interface driver usbfs
[ 2.476000] usbcore: registered new interface driver hub
[ 2.476019] usbcore: registered new device driver usb
[ 2.476519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.477192] ehci-pci: EHCI PCI platform driver
[ 2.477265] SCSI subsystem initialized
[ 2.477352] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.477359] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.477370] ehci-pci 0000:00:1d.0: debug port 2
[ 2.478741] libata version 3.00 loaded.
[ 2.481281] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.481291] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 2.492188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.493365] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.493527] hub 1-0:1.0: USB hub found
[ 2.493532] hub 1-0:1.0: 2 ports detected
[ 2.493825] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.493833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.494906] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 2.494910] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.495122] hub 2-0:1.0: USB hub found
[ 2.495134] hub 2-0:1.0: 9 ports detected
[ 2.496165] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.496168] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.496267] hub 3-0:1.0: USB hub found
[ 2.496276] hub 3-0:1.0: 4 ports detected
[ 2.496538] ahci 0000:00:1f.2: version 3.0
[ 2.496671] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.506804] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xb impl SATA mode
[ 2.506806] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
[ 2.507762] scsi host0: ahci
[ 2.507930] scsi host1: ahci
[ 2.508078] scsi host2: ahci
[ 2.508194] scsi host3: ahci
[ 2.508246] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 43
[ 2.508248] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 43
[ 2.508249] ata3: DUMMY
[ 2.508250] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 irq 43
[ 2.637022] clocksource: Switched to clocksource tsc
[ 2.813452] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 2.813472] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.821298] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.856923] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
[ 2.856927] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.950822] hub 1-1:1.0: USB hub found
[ 2.950987] hub 1-1:1.0: 8 ports detected
[ 2.992701] ata1.00: configured for UDMA/133
[ 2.993072] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
[ 3.113458] usb 2-6: new high-speed USB device number 3 using xhci_hcd
[ 3.341253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.345089] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208FB, TC00, max UDMA/100
[ 3.352013] ata2.00: configured for UDMA/100
[ 3.361292] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208FB TC00 PQ: 0 ANSI: 5
[ 3.691414] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.696990] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.696995] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.697037] sd 0:0:0:0: [sda] Write Protect is off
[ 3.697041] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.697091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.714513] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.714517] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.714801] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.809825] sda: sda1 sda2 sda3
[ 3.810813] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.766921] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.075560] random: crng init done
[ 6.251092] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.318866] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 6.319020] systemd[1]: Detected architecture x86-64.
[ 6.328828] systemd[1]: Set hostname to <webscale>.
[ 7.826618] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.826698] systemd[1]: Reached target Remote File Systems.
[ 7.826709] systemd[1]: Reached target Login Prompts.
[ 7.826752] systemd[1]: Listening on Journal Socket.
[ 7.826782] systemd[1]: Listening on udev Kernel Socket.
[ 7.881916] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.882315] systemd[1]: Created slice User and Session Slice.
[ 8.150429] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.150470] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.175320] vboxdrv: loading out-of-tree module taints kernel.
[ 8.177885] vboxdrv: Found 4 processor cores
[ 8.196930] vboxdrv: TSC mode is Invariant, tentative frequency 2593994331 Hz
[ 8.196931] vboxdrv: Successfully loaded version 5.1.28 (interface 0x002a0000)
[ 8.235447] VBoxPciLinuxInit
[ 8.270088] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 8.358544] systemd-journald[195]: Received request to flush runtime journal from PID 1
[ 8.368599] vboxpci: IOMMU not found (not registered)
[ 8.473805] VBoxNetAdp: Successfully started.
[ 8.474558] VBoxNetFlt: Successfully started.
[ 11.172464] ACPI: AC Adapter [AC] (on-line)
[ 11.684189] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 11.684217] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.685429] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.759269] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.848594] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 11.848647] thermal LNXTHERM:00: registered as thermal_zone0
[ 11.848648] ACPI: Thermal Zone [TZ0] (39 C)
[ 11.849235] ACPI: Battery Slot [BAT0] (battery present)
[ 12.333184] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 12.346117] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 12.346275] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
[ 12.346327] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 12.389840] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 12.389842] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 12.389843] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 12.389843] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 12.389844] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 12.470287] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.470290] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.470292] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.470293] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 12.470294] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 12.470296] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 12.470298] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 12.470691] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 12.470744] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 12.470791] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 12.470836] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 12.470881] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 12.476891] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 12.477559] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 12.477612] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 12.627265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 12.627273] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 12.637599] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffab8f40dcd000, 80:fa:5b:09:e4:d8, XID 1c800800 IRQ 47
[ 12.637601] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 12.813915] iTCO_vendor_support: vendor-support=0
[ 13.048489] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.048530] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 13.048620] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.158686] rtl8723be 0000:02:00.0: enabling device (0000 -> 0003)
[ 13.172878] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 13.624830] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.624993] rtlwifi: rtlwifi: wireless switch is on
[ 13.653451] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 13.739658] AVX2 version of gcm_enc/dec engaged.
[ 13.739660] AES CTR mode by8 optimization enabled
[ 13.795803] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 13.833296] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input20
[ 14.608637] mousedev: PS/2 mouse device common for all mice
[ 14.649336] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
[ 14.667307] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.349164] intel_rapl: Found RAPL domain package
[ 15.349166] intel_rapl: Found RAPL domain core
[ 15.349167] intel_rapl: Found RAPL domain uncore
[ 15.349168] intel_rapl: Found RAPL domain dram
[ 15.349171] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 15.349175] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 15.505616] media: Linux media interface: v0.10
[ 15.532270] Linux video capture interface: v2.00
[ 15.584729] Bluetooth: Core ver 2.22
[ 15.584743] NET: Registered protocol family 31
[ 15.584743] Bluetooth: HCI device and connection manager initialized
[ 15.584746] Bluetooth: HCI socket layer initialized
[ 15.584747] Bluetooth: L2CAP socket layer initialized
[ 15.584751] Bluetooth: SCO socket layer initialized
[ 15.598262] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b43b)
[ 15.602477] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.602480] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.602481] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.602546] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input23
[ 15.602611] usbcore: registered new interface driver uvcvideo
[ 15.602612] USB Video Class driver (1.1.1)
[ 15.764116] usbcore: registered new interface driver btusb
[ 15.768849] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 15.768852] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 15.798414] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 15.798417] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 15.810833] Bluetooth: hci0: rom_version status=0 version=1
[ 15.810839] Bluetooth: cfg_sz 0, total size 22496
[ 16.292832] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 21.874902] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[ 21.935563] r8169 0000:03:00.1 enp3s0f1: link down
[ 21.935620] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[ 21.957470] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 22.732222] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 23.224359] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 24.207075] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 28.656187] fuse init (API version 7.26)
[ 84.015211] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 85.588385] wlp2s0: authenticate with 02:54:3f:39:33:4a
[ 85.610863] wlp2s0: send auth to 02:54:3f:39:33:4a (try 1/3)
[ 85.615246] wlp2s0: authenticated
[ 85.616750] wlp2s0: associate with 02:54:3f:39:33:4a (try 1/3)
[ 85.624622] wlp2s0: RX AssocResp from 02:54:3f:39:33:4a (capab=0x431 status=0 aid=1)
[ 85.625553] wlp2s0: associated
[ 85.625590] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Offline
Not that either, hmm... grasping at straws here but, there was one thread recently, were removing /var/lib/alsa/asound.state and rebooting did help, so that might be useful.
Let's rule it out anyway, add
intel_iommu=off
to your kernel parameters.
Last edited by V1del (2017-10-08 10:32:14)
Online
Same suggestion here. Try to stop pulseaudio and move ~/.config/pulse. Then start pulseaudio again.
Not guaranteed to help, but sometimes pulse indeed acts this way.
He hoped and prayed that there wasn't an afterlife. Then he realized there was a contradiction involved here and merely hoped that there wasn't an afterlife.
Douglas Adams
Offline