You are not logged in.

Pages: 1

#1 2017-10-04 21:38:29

hackoder
Member
Registered: 2017-10-04
Posts: 2

Card detected but no sound output

Machine: Samsung Galaxy Book 10 - SM-W620NZKBCCC

Sound card shows up in aplay -l. Nothing is muted in alsamixer or pavucontrol. Pavucontrol shows audio playing on 'Analog Stereo Output'.

alsa-info.sh: https://pastebin.com/S0AMYvPs

aplay -l:

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC298 Analog [ALC298 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

dmesg | grep snd:

[    2.482412] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.488577] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.526408] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    2.526410] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.526412] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.526413] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.526414] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.526416] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    2.526417] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12

While playing sound, here's the output for:

sudo fuser -v /dev/snd/*:

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  ammar       456 F.... pulseaudio
/dev/snd/pcmC0D0p:   ammar       456 F...m pulseaudio

pacmd list-cards:

1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf638000 irq 280"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5260, available: unknown)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 160, available: unknown)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 160, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9039
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 23.95 ms
	max request: 4 KiB
	max rewind: 344 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 2
	linked by: 2
	configured latency: 25.00 ms; range is 0.50 .. 1837.50 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC298 Analog"
		alsa.id = "ALC298 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf638000 irq 280"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC298"
		alsa.components = "HDA:10ec0298,144dc150,00100103 HDA:8086280b,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
	active port: <analog-output-speaker>

pacmd list-sink-inputs:

2 sink input(s) available.
    index: 22
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 65.50 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 11
	client: 10 <Firefox>
	properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "1628"
		application.process.user = "ammar"
		application.process.host = "galaxybook"
		application.process.binary = "firefox"
		application.language = "en_CA.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "fe829f80e14b450ebea7d3906975845d"
		application.process.session_id = "c1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"
    index: 25
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
	volume: front-left: 0 /   0% / -inf dB,   front-right: 0 /   0% / -inf dB
	        balance 0.00
	muted: no
	current latency: 75.00 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 11
	client: 10 <Firefox>
	properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "1628"
		application.process.user = "ammar"
		application.process.host = "galaxybook"
		application.process.binary = "firefox"
		application.language = "en_CA.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "fe829f80e14b450ebea7d3906975845d"
		application.process.session_id = "c1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Any help would be appreciated. Thank you.

Offline

#2 2017-10-07 09:17:30

Rasi
Member
From: Germany
Registered: 2007-08-14
Posts: 1,914
Website

Re: Card detected but no sound output

Try to stop pulseaudio and then move ~/.config/pulse elsewhere. then start pulse again.
Sometimes it happens that pulse' setup seems to be perfectly fine, yet something does not work at all.
So it's at least worth a shot.

Last edited by Rasi (2017-10-07 09:18:00)

He hoped and prayed that there wasn't an afterlife. Then he realized there was a contradiction involved here and merely hoped that there wasn't an afterlife.

Douglas Adams

Offline

#3 2017-10-07 16:54:31

hackoder
Member
Registered: 2017-10-04
Posts: 2

Re: Card detected but no sound output

I tried stopping pulse audio, deleting the folder, and restarting. No change:

systemctl --user stop pulseaudio.socket
systemctl --user stop pulseaudio.service
rm -rf ~/.config/pulse
systemctl --user start pulseaudio.socket
systemctl --user start pulseaudio.service

Another data point;
compared to my other arch installation on a laptop, it seems like the speaker and headphone jack are not detected (?). None of the mixers list a speaker and a headphone jack, whereas I can see both on my laptop.

Last edited by hackoder (2017-10-07 16:55:26)

Offline

#4 2017-10-08 10:30:34

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,742

Re: Card detected but no sound output

Just to rule it out, since you have a combined HDMI/Analog output and this might be causing issues: Can you add 

intel_iommu=off

to your kernel params?

Offline

Pages: 1

Board footer

Powered by FluxBB