You are not logged in.
Pages: 1
# Capsula installation on Acer Switch One 10 10,1" 2-i-1 S1003-12MW
So long so good.
Followed instruction on https://wiki.archlinux.org/index.php/In … ting_Linux
First stop: Set old swap partition as new root partition:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/mmcblk0p2 during installation
UUID=d73caf5b-5775-4f13-a73a-872d1e209b4b / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/mmcblk0p1 during installation
UUID=BA30-FA13 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
No mount point for Swapfile.
# blkid
/dev/mmcblk0: PTUUID="45886428-f165-44cf-8bd8-28ae4d3cc3ac" PTTYPE="gpt"
/dev/mmcblk0p1: UUID="BA30-FA13" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="ed8cbf32-b721-4843-8637-05f973ce48f5"
/dev/mmcblk0p2: UUID="d73caf5b-5775-4f13-a73a-872d1e209b4b" TYPE="ext4" PARTUUID="029b1ae6-4d9e-426f-8e16-32ecbae296e7"
root.x86_64/etc/pacman.d# df -h
Filesystem Size Used Avail Use% Mounted on
udev 921M 0 921M 0% /dev
tmpfs 190M 9,4M 181M 5% /run
/dev/mmcblk0p2 29G 9,7G 17G 37% /
tmpfs 948M 155M 793M 17% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 948M 0 948M 0% /sys/fs/cgroup
/dev/mmcblk0p1 511M 348K 511M 1% /boot/efi
tmpfs 190M 64K 190M 1% /run/user/1000
Need guidelines for >>
Acer One S1003-12MW >>
Model Name: S1003 Part Number: NT.LCQEM.003>>
Offline
Is there a question you are asking?
Not an Installation issue, moving to NC...
Offline
Pages: 1