You are not logged in.

#1 2017-09-25 21:27:23

mr_miyagi420
Member
Registered: 2017-09-25
Posts: 5

Lenovo Thinkpad T440s Sound not working [Speakers]

Hi there,

I am a new to arch, and I was successful in configuring it but the sound does not work no matter what. Pavucontrol shows that there is sound when it is played there isn't actual audio output. I have been previously using elementary and the sound also didn't work then. However, when I had a windows partition my sound did work hence I suspect it isn't a hardwere issue. I have tried many laptop specific solutions none of which worked. I would list the solutions that I've tried but I've lost count so I might as well try it all again. Alsamixer is not muted

Last edited by mr_miyagi420 (2017-09-25 21:27:58)

Offline

#2 2017-09-25 21:38:06

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

Have you selected the correct profile in the configuration tab of pavucontrol?


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2017-09-25 21:46:59

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

Play something back and post the outputs of

sudo fuser -v /dev/snd/*
aplay -lL
amixer -c$cardindex #Use the index of the correct card from aplay -l here
dmesg | grep -iE 'snd|hda'
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

in [ code ] tags, and please ask for help before forgetting what you configured in an attempt to fix, there might be all sorts of ways in which you've made the problem worse with no way to properly trace it back. Do you have an /etc/asound.conf? what are it's contents?

Offline

#4 2017-09-26 22:15:14

mr_miyagi420
Member
Registered: 2017-09-25
Posts: 5

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

@slithery yeah I did

@V1del here are the outputs while sound was playing:

sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  raf         435 F.... pulseaudio
/dev/snd/pcmC0D0c:   raf         435 F...m pulseaudio
/dev/snd/pcmC0D0p:   raf         435 F...m pulseaudio
aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
sysdefault:CARD=PCH
    HDA Intel PCH, ALC3232 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC3232 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3232 Analog [ALC3232 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
amixer -c 0

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 84 [97%] [-2.25dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 83 [95%] [-3.00dB] [off]
  Front Right: Playback 83 [95%] [-3.00dB] [off]
Simple mixer control 'Headphone',1
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 38 [60%] [11.25dB] [on]
  Front Right: Capture 38 [60%] [11.25dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Dock Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 1
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
dmesg | grep -iE 'snd|hda'

[    2.009046] snd_hda_intel: unknown parameter 'vid' ignored
[    2.009048] snd_hda_intel: unknown parameter 'pid' ignored
[    2.009050] snd_hda_intel: unknown parameter 'vid' ignored
[    2.009051] snd_hda_intel: unknown parameter 'pid' ignored
[    2.012379] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[    2.028893] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.028895] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.028897] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    2.028898] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.028899] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.028901] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    2.028902] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    2.028904] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.049531] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    2.049650] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.049675] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.049703] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.049729] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[48698.172413] Modules linked in: ctr ccm arc4 iTCO_wdt iTCO_vendor_support uvcvideo btusb btrtl btbcm videobuf2_vmalloc btintel videobuf2_memops videobuf2_v4l2 bluetooth videobuf2_core videodev media ecdh_generic joydev mousedev hid_multitouch intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc mei_wdt usbhid hid input_leds evdev aesni_intel aes_x86_64 crypto_simd glue_helper cryptd iwlmvm intel_cstate mac80211 intel_rapl_perf psmouse mac_hid pcspkr i2c_i801 iwlwifi i915 rtsx_pci_ms snd_hda_codec_realtek cfg80211 lpc_ich snd_hda_codec_generic memstick shpchp e1000e drm_kms_helper snd_hda_intel ptp snd_hda_codec drm snd_hda_core snd_hwdep mei_me intel_gtt snd_pcm syscopyarea sysfillrect sysimgblt fb_sys_fops
[48698.172442]  pps_core i2c_algo_bit snd_timer mei thinkpad_acpi nvram snd soundcore thermal rfkill led_class wmi ac battery video intel_smartconnect tpm_tis tpm_tis_core tpm button sch_fq_codel ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache sd_mod rtsx_pci_sdmmc serio_raw mmc_core atkbd libps2 ahci libahci libata xhci_pci ehci_pci scsi_mod xhci_hcd ehci_hcd rtsx_pci usbcore usb_common i8042 serio
[48698.172539] Modules linked in: ctr ccm arc4 iTCO_wdt iTCO_vendor_support uvcvideo btusb btrtl btbcm videobuf2_vmalloc btintel videobuf2_memops videobuf2_v4l2 bluetooth videobuf2_core videodev media ecdh_generic joydev mousedev hid_multitouch intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc mei_wdt usbhid hid input_leds evdev aesni_intel aes_x86_64 crypto_simd glue_helper cryptd iwlmvm intel_cstate mac80211 intel_rapl_perf psmouse mac_hid pcspkr i2c_i801 iwlwifi i915 rtsx_pci_ms snd_hda_codec_realtek cfg80211 lpc_ich snd_hda_codec_generic memstick shpchp e1000e drm_kms_helper snd_hda_intel ptp snd_hda_codec drm snd_hda_core snd_hwdep mei_me intel_gtt snd_pcm syscopyarea sysfillrect sysimgblt fb_sys_fops
[48698.172559]  pps_core i2c_algo_bit snd_timer mei thinkpad_acpi nvram snd soundcore thermal rfkill led_class wmi ac battery video intel_smartconnect tpm_tis tpm_tis_core tpm button sch_fq_codel ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache sd_mod rtsx_pci_sdmmc serio_raw mmc_core atkbd libps2 ahci libahci libata xhci_pci ehci_pci scsi_mod xhci_hcd ehci_hcd rtsx_pci usbcore usb_common i8042 serio
pacmd list-cards

1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf0634000 irq 44"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:analog-surround-40: Analog Surround 4.0 Output (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-dock-mic: Dock Microphone (priority 7800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 9039
	volume: front-left: 58410 /  89% / -3.00 dB,   front-right: 58410 /  89% / -3.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 35.45 ms
	max request: 6 KiB
	max rewind: 344 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3232 Analog"
		alsa.id = "ALC3232 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf0634000 irq 44"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC3232"
		alsa.components = "HDA:10ec0292,17aa220c,00100001"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
pacmd list-sink-inputs
1 sink input(s) available.
    index: 8
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
	volume: front-left: 59836 /  91% / -2.37 dB,   front-right: 59836 /  91% / -2.37 dB
	        balance 0.00
	muted: no
	current latency: 66.33 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	module: 8
	client: 3 <Firefox>
	properties:
		media.name = "AudioStream"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "799"
		application.process.user = "raf"
		application.process.host = "archlinux"
		application.process.binary = "firefox"
		application.language = "C"
		window.x11.display = ":0"
		application.process.machine_id = "db15aa4d395f41cb8cde578694b5314e"
		application.process.session_id = "c1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

I do have an asound.conf. Its contents are:

# Use PulseAudio by default
pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
       show on
       description "Default ALSA Output (currently PulseAudio Sound Server)"
     }
}

ctl.!default {
   type pulse
   fallback "sysdefault"
}

# vim:set ft=alsaconf:

Last edited by mr_miyagi420 (2017-09-27 13:26:38)

Offline

#5 2017-10-04 07:47:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

That looks alright at first glance. That dmesg contains a kernel stack so something might be crashing there, can you post a full dmesg?

And to try and rule it out, do you get anything from a

speaker-test -Dhw:0

?

Last edited by V1del (2017-10-04 07:58:15)

Offline

#6 2017-10-04 08:25:13

mr_miyagi420
Member
Registered: 2017-09-25
Posts: 5

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

Here it is

dmesg
[13461.014135] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13461.014137] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13461.014139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13461.014160] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[13461.014278] ata1.00: supports DRM functions and may not be fully accessible
[13461.014351] ata1.00: NCQ Send/Recv Log not supported
[13461.014411] ata1.00: configured for UDMA/133
[13461.019039] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[13461.262421] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[13461.335737] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[13461.619127] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[13461.750763] PM: resume of devices complete after 1069.454 msecs
[13461.750862] usb 2-7:1.0: rebind failed: -517
[13461.750866] usb 2-7:1.1: rebind failed: -517
[13461.751115] acpi LNXPOWER:02: Turning OFF
[13461.751368] PM: Finishing wakeup.
[13461.751370] OOM killer enabled.
[13461.751372] Restarting tasks ... done.
[13461.788286] Bluetooth: hci0: read Intel version: 370710018002030d00
[13461.788335] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[13461.909300] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[13465.168054] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[13465.173811] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[13465.175552] wlp3s0: authenticated
[13465.178919] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[13465.180523] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=9)
[13465.184016] wlp3s0: associated
[13465.184057] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[14206.722899] PM: Syncing filesystems ... done.
[14206.752321] PM: Preparing system for sleep (mem)
[14206.752684] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14206.754021] OOM killer disabled.
[14206.754022] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14206.755124] PM: Suspending system (mem)
[14206.755147] Suspending console(s) (use no_console_suspend to debug)
[14206.811294] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[14206.814406] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14206.822804] sd 0:0:0:0: [sda] Stopping disk
[14206.833034] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14207.041108] e1000e: EEE TX LPI TIMER: 00000011
[14207.343319] PM: suspend of devices complete after 588.064 msecs
[14207.357370] PM: late suspend of devices complete after 14.048 msecs
[14207.359058] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14207.359999] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14207.360043] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14207.400687] PM: noirq suspend of devices complete after 43.313 msecs
[14207.401342] ACPI: Preparing to enter system sleep state S3
[14207.640697] ACPI : EC: event blocked
[14207.640698] ACPI : EC: EC stopped
[14207.640699] PM: Saving platform NVS memory
[14207.640743] Disabling non-boot CPUs ...
[14207.669766] smpboot: CPU 1 is now offline
[14207.692297] smpboot: CPU 2 is now offline
[14207.725534] smpboot: CPU 3 is now offline
[14207.727695] ACPI: Low-level resume complete
[14207.727754] ACPI : EC: EC started
[14207.727754] PM: Restoring platform NVS memory
[14207.728093] Suspended for 803.243 seconds
[14207.728117] Enabling non-boot CPUs ...
[14207.728151] x86: Booting SMP configuration:
[14207.728151] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14207.782895]  cache: parent cpu1 should not be sleeping
[14207.783009] CPU1 is up
[14207.783025] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14207.836228]  cache: parent cpu2 should not be sleeping
[14207.836354] CPU2 is up
[14207.836369] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14207.889575]  cache: parent cpu3 should not be sleeping
[14207.889812] CPU3 is up
[14207.896163] ACPI: Waking up from system sleep state S3
[14208.426207] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14208.426265] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14208.426327] PM: noirq resume of devices complete after 43.424 msecs
[14208.428433] PM: early resume of devices complete after 2.086 msecs
[14208.428487] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14208.428525] usb usb2: root hub lost power or was reset
[14208.428527] usb usb3: root hub lost power or was reset
[14208.429642] ACPI : EC: event unblocked
[14208.430049] rtc_cmos 00:02: System wakeup disabled by ACPI
[14208.430799] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.431298] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.438752] sd 0:0:0:0: [sda] Starting disk
[14208.636344] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.636858] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.656198] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14208.753145] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14208.755847] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14208.755849] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14208.755850] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14208.755872] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14208.755992] ata1.00: supports DRM functions and may not be fully accessible
[14208.761143] ata1.00: NCQ Send/Recv Log not supported
[14208.761527] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14208.761529] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14208.761531] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14208.761553] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14208.761672] ata1.00: supports DRM functions and may not be fully accessible
[14208.761739] ata1.00: NCQ Send/Recv Log not supported
[14208.761799] ata1.00: configured for UDMA/133
[14208.766251] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14209.009553] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14209.079547] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14209.366262] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14209.497879] PM: resume of devices complete after 1069.466 msecs
[14209.497985] usb 2-7:1.0: rebind failed: -517
[14209.497990] usb 2-7:1.1: rebind failed: -517
[14209.498263] acpi LNXPOWER:02: Turning OFF
[14209.498539] PM: Finishing wakeup.
[14209.498542] OOM killer enabled.
[14209.498543] Restarting tasks ... done.
[14209.539591] Bluetooth: hci0: read Intel version: 370710018002030d00
[14209.539594] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14209.693725] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14212.882017] wlp3s0: authenticate with 40:0d:10:64:e4:09
[14212.888860] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[14212.892166] wlp3s0: authenticated
[14212.892772] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[14212.897574] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=2)
[14212.898917] wlp3s0: associated
[14378.386025] PM: Syncing filesystems ... done.
[14378.404468] PM: Preparing system for sleep (mem)
[14378.404981] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14378.406505] OOM killer disabled.
[14378.406506] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14378.407706] PM: Suspending system (mem)
[14378.407741] Suspending console(s) (use no_console_suspend to debug)
[14378.451564] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[14378.452669] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14378.462241] sd 0:0:0:0: [sda] Stopping disk
[14378.470350] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14378.662376] e1000e: EEE TX LPI TIMER: 00000011
[14379.428622] PM: suspend of devices complete after 1020.730 msecs
[14379.445351] PM: late suspend of devices complete after 16.724 msecs
[14379.448212] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14379.448338] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14379.448351] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14379.488673] PM: noirq suspend of devices complete after 43.317 msecs
[14379.489457] ACPI: Preparing to enter system sleep state S3
[14379.728682] ACPI : EC: event blocked
[14379.728683] ACPI : EC: EC stopped
[14379.728684] PM: Saving platform NVS memory
[14379.728732] Disabling non-boot CPUs ...
[14379.757992] smpboot: CPU 1 is now offline
[14379.776959] smpboot: CPU 2 is now offline
[14379.803500] smpboot: CPU 3 is now offline
[14379.805650] ACPI: Low-level resume complete
[14379.805708] ACPI : EC: EC started
[14379.805709] PM: Restoring platform NVS memory
[14379.806048] Suspended for 1446.920 seconds
[14379.806072] Enabling non-boot CPUs ...
[14379.806108] x86: Booting SMP configuration:
[14379.806109] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14379.860877]  cache: parent cpu1 should not be sleeping
[14379.860991] CPU1 is up
[14379.861008] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14379.914210]  cache: parent cpu2 should not be sleeping
[14379.914334] CPU2 is up
[14379.914349] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14379.970890]  cache: parent cpu3 should not be sleeping
[14379.971126] CPU3 is up
[14379.977489] ACPI: Waking up from system sleep state S3
[14380.507531] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14380.507589] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14380.507642] PM: noirq resume of devices complete after 43.424 msecs
[14380.509722] PM: early resume of devices complete after 2.060 msecs
[14380.509789] usb usb2: root hub lost power or was reset
[14380.509791] usb usb3: root hub lost power or was reset
[14380.509846] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14380.509945] ACPI : EC: event unblocked
[14380.510938] sd 0:0:0:0: [sda] Starting disk
[14380.511148] rtc_cmos 00:02: System wakeup disabled by ACPI
[14380.513088] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.513735] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.724371] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.724885] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.740852] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14380.824279] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14380.827213] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14380.827215] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14380.827217] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14380.827239] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14380.827358] ata1.00: supports DRM functions and may not be fully accessible
[14380.832353] ata1.00: NCQ Send/Recv Log not supported
[14380.832716] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14380.832718] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14380.832719] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14380.832764] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14380.832906] ata1.00: supports DRM functions and may not be fully accessible
[14380.833000] ata1.00: NCQ Send/Recv Log not supported
[14380.833062] ata1.00: configured for UDMA/133
[14380.847512] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14381.090902] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14381.164185] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14381.334204] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14381.590453] PM: resume of devices complete after 1080.753 msecs
[14381.590525] usb 2-7:1.0: rebind failed: -517
[14381.590529] usb 2-7:1.1: rebind failed: -517
[14381.590719] acpi LNXPOWER:02: Turning OFF
[14381.590964] PM: Finishing wakeup.
[14381.590966] OOM killer enabled.
[14381.590967] Restarting tasks ... done.
[14381.620754] Bluetooth: hci0: read Intel version: 370710018002030d00
[14381.620820] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14381.750795] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14385.055498] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[14385.060845] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[14385.062799] wlp3s0: authenticated
[14385.064087] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[14385.065802] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=6)
[14385.067763] wlp3s0: associated
[14385.070548] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[14920.062373] PM: Syncing filesystems ... done.
[14920.148325] PM: Preparing system for sleep (mem)
[14920.148630] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14920.149889] OOM killer disabled.
[14920.149889] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[14920.150887] PM: Suspending system (mem)
[14920.150913] Suspending console(s) (use no_console_suspend to debug)
[14920.216655] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[14920.221348] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14920.224787] sd 0:0:0:0: [sda] Stopping disk
[14920.238899] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14920.431230] e1000e: EEE TX LPI TIMER: 00000011
[14920.740446] PM: suspend of devices complete after 589.395 msecs
[14920.757688] PM: late suspend of devices complete after 17.236 msecs
[14920.760508] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14920.760550] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14920.760654] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14920.800899] PM: noirq suspend of devices complete after 43.207 msecs
[14920.801684] ACPI: Preparing to enter system sleep state S3
[14921.040897] ACPI : EC: event blocked
[14921.040899] ACPI : EC: EC stopped
[14921.040900] PM: Saving platform NVS memory
[14921.040953] Disabling non-boot CPUs ...
[14921.070194] smpboot: CPU 1 is now offline
[14921.099177] smpboot: CPU 2 is now offline
[14921.135733] smpboot: CPU 3 is now offline
[14921.137944] ACPI: Low-level resume complete
[14921.138003] ACPI : EC: EC started
[14921.138003] PM: Restoring platform NVS memory
[14921.138337] Suspended for 38641.656 seconds
[14921.138360] Enabling non-boot CPUs ...
[14921.138393] x86: Booting SMP configuration:
[14921.138394] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14921.216429]  cache: parent cpu1 should not be sleeping
[14921.216544] CPU1 is up
[14921.216560] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14921.296426]  cache: parent cpu2 should not be sleeping
[14921.296551] CPU2 is up
[14921.296566] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14921.376438]  cache: parent cpu3 should not be sleeping
[14921.376672] CPU3 is up
[14921.383049] ACPI: Waking up from system sleep state S3
[14921.676567] thinkpad_acpi: EC reports that Thermal Table has changed
[14921.959740] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14921.959803] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14921.959850] PM: noirq resume of devices complete after 43.410 msecs
[14921.961954] PM: early resume of devices complete after 2.085 msecs
[14921.962046] usb usb2: root hub lost power or was reset
[14921.962048] usb usb3: root hub lost power or was reset
[14921.962066] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14921.962185] ACPI : EC: event unblocked
[14921.962970] sd 0:0:0:0: [sda] Starting disk
[14921.963263] rtc_cmos 00:02: System wakeup disabled by ACPI
[14921.965120] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14921.965614] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.166668] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.167181] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.189681] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14922.276728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14922.279319] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14922.279321] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14922.279323] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14922.279374] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14922.279528] ata1.00: supports DRM functions and may not be fully accessible
[14922.284736] ata1.00: NCQ Send/Recv Log not supported
[14922.285027] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14922.285028] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14922.285029] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14922.285052] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14922.285201] ata1.00: supports DRM functions and may not be fully accessible
[14922.285294] ata1.00: NCQ Send/Recv Log not supported
[14922.285356] ata1.00: configured for UDMA/133
[14922.299699] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14922.543098] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14922.616400] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14922.786443] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14923.042741] PM: resume of devices complete after 1080.807 msecs
[14923.042844] usb 2-7:1.0: rebind failed: -517
[14923.042848] usb 2-7:1.1: rebind failed: -517
[14923.043167] acpi LNXPOWER:02: Turning OFF
[14923.043461] PM: Finishing wakeup.
[14923.043464] OOM killer enabled.
[14923.043465] Restarting tasks ... done.
[14923.077003] Bluetooth: hci0: read Intel version: 370710018002030d00
[14923.077008] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14923.222986] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14926.501171] wlp3s0: authenticate with 40:0d:10:64:e4:09
[14926.507232] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[14926.510672] wlp3s0: authenticated
[14926.513049] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[14926.517807] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=3)
[14926.519162] wlp3s0: associated
speaker-test -Dhw:0
speaker-test 1.1.4

Playback device is hw:0
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Channels count (1) not available for playbacks: Invalid argument
Setting of hwparams failed: Invalid argument

Offline

#7 2017-10-04 08:32:32

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

That's a truncated dmesg, redirect into a file if your scrollbuffer is too short

dmesg > dmesg.log

or similar. My bad on the speaker-test command should be

speaker-test -Dhw:0 -c2

and although a stretch, try to unmute that headphone control mentioned in amixer

amixer -c0 set Headphone,0 unmute

Last edited by V1del (2017-10-04 08:42:42)

Offline

#8 2017-10-04 13:44:58

mr_miyagi420
Member
Registered: 2017-09-25
Posts: 5

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

dmesg:

[    0.000000] Linux version 4.12.13-1-ARCH (builduser@foutrelis) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Fri Sep 15 06:36:43 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8d5b21db-9992-4926-85b6-da9a2c26ac04 rw quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce0dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce0e0000-0x00000000dcc0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcc0f000-0x00000000dce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20ARS0SY0G/20ARS0SY0G, BIOS GJET92WW (2.42 ) 03/03/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 00DCF00000 mask 7FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xce0e0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff89fb000f0100]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff89fb00097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1bfd5f000, 0x1bfd5ffff] PGTABLE
[    0.000000] BRK [0x1bfd60000, 0x1bfd60fff] PGTABLE
[    0.000000] BRK [0x1bfd61000, 0x1bfd61fff] PGTABLE
[    0.000000] BRK [0x1bfd62000, 0x1bfd62fff] PGTABLE
[    0.000000] BRK [0x1bfd63000, 0x1bfd63fff] PGTABLE
[    0.000000] BRK [0x1bfd64000, 0x1bfd64fff] PGTABLE
[    0.000000] BRK [0x1bfd65000, 0x1bfd65fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x372cb000-0x3795cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DCEFE170 0000EC (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: DSDT 0x00000000DCEE2000 010FAD (v01 LENOVO TP-GJ    00002420 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DCD7A000 000040
[    0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GJ    00002420 PTEC 00000001)
[    0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDF000 0007F5 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDE000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDC000 00125C (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 0x00000000DCEDA000 00006E (v05 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: TCPA 0x00000000DCED8000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: UEFI 0x00000000DCED7000 000042 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: MSDM 0x00000000DCCE2000 000055 (v03 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: BATB 0x00000000DCED6000 000046 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: FPDT 0x00000000DCED5000 000064 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: UEFI 0x00000000DCED4000 0002F6 (v01 LENOVO TP-GJ    00002420 PTEC 00000002)
[    0.000000] ACPI: SSDT 0x00000000DCED3000 00047F (v01 LENOVO IsctTabl 00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21e5fb000-0x21e5fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ce0dffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[    0.000000] On node 0 totalpages: 2016892
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13124 pages used for memmap
[    0.000000]   DMA32 zone: 839904 pages, LIFO batch:31
[    0.000000]   Normal zone: 18328 pages used for memmap
[    0.000000]   Normal zone: 1172992 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dda00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xce0e0000-0xdcc0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcc0f000-0xdce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff89fd1e200000 s106328 r8192 d28840 u262144
[    0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1985355
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8d5b21db-9992-4926-85b6-da9a2c26ac04 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7852884K/8067568K available (6543K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 214684K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 27931 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:760 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2693.830 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.14 BogoMIPS (lpj=8979433)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170303
[    0.037682] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.037750] Security Framework initialized
[    0.037752] Yama: becoming mindful.
[    0.038756] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.043306] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.045125] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.045144] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.045672] CPU: Physical Processor ID: 0
[    0.045674] CPU: Processor Core ID: 0
[    0.045683] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.045685] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.045694] mce: CPU supports 7 MCE banks
[    0.045715] CPU0: Thermal monitoring enabled (TM1)
[    0.045744] process: using mwait in idle threads
[    0.045751] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.045753] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.048363] Freeing SMP alternatives memory: 24K
[    0.050137] smpboot: Max logical packages: 4
[    0.050280] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.050961] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084347] TSC deadline timer enabled
[    0.084351] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.096682] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.096782] ... version:                3
[    0.096784] ... bit width:              48
[    0.096785] ... generic registers:      4
[    0.096787] ... value mask:             0000ffffffffffff
[    0.096789] ... max period:             00007fffffffffff
[    0.096790] ... fixed-purpose events:   3
[    0.096791] ... event mask:             000000070000000f
[    0.116996] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.123338] smp: Bringing up secondary CPUs ...
[    0.150032] x86: Booting SMP configuration:
[    0.150035] .... node  #0, CPUs:      #1 #2 #3
[    0.453382] smp: Brought up 1 node, 4 CPUs
[    0.453382] smpboot: Total of 4 processors activated (21574.72 BogoMIPS)
[    0.456923] sched_clock: Marking stable (456666621, 0)->(460074671, -3408050)
[    0.457560] devtmpfs: initialized
[    0.457674] x86/mm: Memory block size: 128MB
[    0.463224] PM: Registering ACPI NVS region [mem 0xdcc0f000-0xdce7efff] (2555904 bytes)
[    0.463451] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.463476] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.463619] pinctrl core: initialized pinctrl subsystem
[    0.463691] RTC time: 18:30:46, date: 10/02/17
[    0.463898] NET: Registered protocol family 16
[    0.466719] cpuidle: using governor ladder
[    0.466800] cpuidle: using governor menu
[    0.466822] Error parsing PCC subspaces from PCCT
[    0.466881] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.466883] ACPI: bus type PCI registered
[    0.466886] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.467172] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.467204] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.467218] PCI: Using configuration type 1 for base access
[    0.467296] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.469331] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.469334] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.469839] ACPI: Added _OSI(Module Device)
[    0.469842] ACPI: Added _OSI(Processor Device)
[    0.469844] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.469846] ACPI: Added _OSI(Processor Aggregator Device)
[    0.469859] ACPI : EC: EC started
[    0.469861] ACPI : EC: interrupt blocked
[    0.472216] ACPI: \: Used as first EC
[    0.472219] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.472222] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.481995] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.490640] ACPI Error: Needed type [Reference], found [Integer] ffff89fd149d7120 (20170303/exresop-103)
[    0.490662] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170303/dswexec-461)
[    0.490678] ACPI Error: Method parse/execution failed [\_PR.CPU0._PDC] (Node ffff89fd15d48988), AE_AML_OPERAND_TYPE (20170303/psparse-543)
[    0.491323] ACPI: Dynamic OEM Table Load:
[    0.491347] ACPI: SSDT 0xFFFF89FD1493A000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.492274] ACPI: Dynamic OEM Table Load:
[    0.492292] ACPI: SSDT 0xFFFF89FD1499F000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.494465] ACPI : EC: EC stopped
[    0.494467] ACPI : EC: EC started
[    0.494468] ACPI : EC: interrupt blocked
[    0.494864] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[    0.494869] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.494872] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[    0.494874] ACPI: Interpreter enabled
[    0.494937] ACPI: (supports S0 S3 S4 S5)
[    0.494939] ACPI: Using IOAPIC for interrupt routing
[    0.494990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.502675] ACPI: Power Resource [PUBS] (on)
[    0.503841] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.504301] ACPI: Power Resource [NVP3] (on)
[    0.504361] ACPI: Power Resource [NVP2] (on)
[    0.511677] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.511853] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[    0.512022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.512189] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[    0.512355] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.512485] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.512654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.512818] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[    0.513024] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.513033] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.513303] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.513416] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.513420] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.513424] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.513427] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.513815] PCI host bridge to bus 0000:00
[    0.513820] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.513824] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.513827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.513830] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.513833] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.513836] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.513854] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.514051] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.514077] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.514093] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.514105] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.514294] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.514316] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    0.514546] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.514575] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    0.514675] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.514751] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.514825] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.514857] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
[    0.514966] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.515111] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[    0.515135] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    0.515149] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
[    0.515163] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.515257] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.515331] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.515409] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.515436] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    0.515548] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.515691] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[    0.515802] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.516053] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[    0.516171] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.516343] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.516435] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.516463] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    0.516595] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.516673] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.516750] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.517043] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.517066] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.517079] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    0.517091] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.517103] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    0.517116] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.517128] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    0.517190] pci 0000:00:1f.2: PME# supported from D3hot
[    0.517321] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.517345] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    0.517377] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.517652] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.517732] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.518228] pci 0000:02:00.0: supports D1 D2
[    0.518230] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.526884] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.526893] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.527183] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    0.527343] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.527763] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.537003] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.537012] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.539045] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.539236] ACPI : EC: interrupt unblocked
[    0.539246] ACPI : EC: event unblocked
[    0.539257] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.539261] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.539436] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.539440] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.539448] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.539449] vgaarb: loaded
[    0.539534] EDAC MC: Ver: 3.0.0
[    0.539894] PCI: Using ACPI for IRQ routing
[    0.542114] PCI: pci_cache_line_size set to 64 bytes
[    0.542451] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.542454] e820: reserve RAM buffer [mem 0xce0e0000-0xcfffffff]
[    0.542456] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.542636] NetLabel: Initializing
[    0.542638] NetLabel:  domain hash size = 128
[    0.542639] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.542676] NetLabel:  unlabeled traffic allowed by default
[    0.542785] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.542799] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.544842] clocksource: Switched to clocksource hpet
[    0.565507] VFS: Disk quotas dquot_6.6.0
[    0.565552] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.565723] pnp: PnP ACPI init
[    0.566627] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.566632] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.566635] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.566638] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.566641] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.566645] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.566648] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.566651] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.566654] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.566658] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.566661] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.566664] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.566667] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.566670] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.566674] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.566678] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.566681] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.566690] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.566901] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.566937] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.566942] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.566945] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.566948] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.566951] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.566954] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.566957] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.566960] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.566963] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.566967] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.566970] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.566973] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.566978] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.566981] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.566985] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.566988] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.566991] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.566994] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.566998] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.567003] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.567124] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.567169] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.567208] pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
[    0.567303] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.568070] pnp: PnP ACPI: found 6 devices
[    0.576212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.576254] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.576263] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.576276] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.576283] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.576299] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.576302] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.576305] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.576308] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.576311] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.576314] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.576317] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.576539] NET: Registered protocol family 2
[    0.576889] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.577171] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.577429] TCP: Hash tables configured (established 65536 bind 65536)
[    0.577502] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.577566] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.577692] NET: Registered protocol family 1
[    0.577721] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.578552] PCI: CLS 64 bytes, default 64
[    0.578632] Unpacking initramfs...
[    0.874253] Freeing initrd memory: 6728K
[    0.874271] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.874278] software IO TLB [mem 0xca0e0000-0xce0e0000] (64MB) mapped at [ffff89fbca0e0000-ffff89fbce0dffff]
[    0.874722] Scanning for low memory corruption every 60 seconds
[    0.876110] Initialise system trusted keyrings
[    0.876129] Key type blacklist registered
[    0.876209] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.878784] zbud: loaded
[    0.880231] Key type asymmetric registered
[    0.880265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.880332] io scheduler noop registered
[    0.880335] io scheduler deadline registered
[    0.880412] io scheduler cfq registered (default)
[    0.880414] io scheduler mq-deadline registered
[    0.880416] io scheduler kyber registered
[    0.880472] io scheduler bfq registered
[    0.881171] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.881173] vesafb: scrolling: redraw
[    0.881176] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.881200] vesafb: framebuffer at 0xe0000000, mapped to 0xffffab5f41800000, using 8128k, total 8128k
[    1.350426] Console: switching to colour frame buffer device 240x67
[    1.817691] fb0: VESA VGA frame buffer device
[    1.817723] intel_idle: MWAIT substates: 0x11142120
[    1.817726] intel_idle: v0.4.1 model 0x45
[    1.818214] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.818614] GHES: HEST is not enabled!
[    1.818770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.819656] Linux agpgart interface v0.103
[    1.820328] rtc_cmos 00:02: RTC can wake from S4
[    1.820521] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.820560] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.820588] intel_pstate: Intel P-state driver initializing
[    1.821018] ledtrig-cpu: registered to indicate activity on CPUs
[    1.821101] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.821574] NET: Registered protocol family 10
[    1.829297] Segment Routing with IPv6
[    1.829343] NET: Registered protocol family 17
[    1.829858] RAS: Correctable Errors collector initialized.
[    1.829922] microcode: sig=0x40651, pf=0x40, revision=0x20
[    1.830105] microcode: Microcode Update Driver: v2.2.
[    1.830445] registered taskstats version 1
[    1.830458] Loading compiled-in X.509 certificates
[    1.830492] zswap: loaded using pool lzo/zbud
[    1.831358]   Magic number: 5:561:543
[    1.831518] rtc_cmos 00:02: setting system clock to 2017-10-02 18:30:48 UTC (1506969048)
[    1.833117] PM: Hibernation image not present or could not be loaded.
[    1.835376] Freeing unused kernel memory: 1324K
[    1.835377] Write protecting the kernel read-only data: 10240k
[    1.835780] Freeing unused kernel memory: 1636K
[    1.870306] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.871995] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.872040] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.876808] ACPI: bus type USB registered
[    1.876825] usbcore: registered new interface driver usbfs
[    1.876830] usbcore: registered new interface driver hub
[    1.876852] usbcore: registered new device driver usb
[    1.877302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.877982] ehci-pci: EHCI PCI platform driver
[    1.878113] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.878118] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.878131] ehci-pci 0000:00:1d.0: debug port 2
[    1.878351] SCSI subsystem initialized
[    1.879671] libata version 3.00 loaded.
[    1.882036] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.882047] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
[    1.890733] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.894187] tsc: Refined TSC clocksource calibration: 2693.764 MHz
[    1.894192] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d43bb7f27, max_idle_ns: 440795270902 ns
[    1.894820] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.894991] hub 1-0:1.0: USB hub found
[    1.894997] hub 1-0:1.0: 3 ports detected
[    1.895272] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.895278] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.896351] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.896355] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.896564] hub 2-0:1.0: USB hub found
[    1.896577] hub 2-0:1.0: 9 ports detected
[    1.897503] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.897506] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.897606] hub 3-0:1.0: USB hub found
[    1.897614] hub 3-0:1.0: 4 ports detected
[    1.898106] ahci 0000:00:1f.2: version 3.0
[    1.898248] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    1.898250] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.898706] scsi host0: ahci
[    1.898791] scsi host1: ahci
[    1.898862] scsi host2: ahci
[    1.898899] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 42
[    1.898900] ata2: DUMMY
[    1.898900] ata3: DUMMY
[    2.212532] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.214882] usb 2-6: new full-speed USB device number 2 using xhci_hcd
[    2.214899] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.215327] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.215331] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.215333] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.215396] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    2.215621] ata1.00: supports DRM functions and may not be fully accessible
[    2.215703] ata1.00: NCQ Send/Recv Log not supported
[    2.215705] ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133
[    2.215708] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.216054] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.216057] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.216059] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.216089] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    2.216220] ata1.00: supports DRM functions and may not be fully accessible
[    2.216298] ata1.00: NCQ Send/Recv Log not supported
[    2.216367] ata1.00: configured for UDMA/133
[    2.216723] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7TD256 2L5Q PQ: 0 ANSI: 5
[    2.255408] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    2.255440] sd 0:0:0:0: [sda] Write Protect is off
[    2.255444] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.255503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.257426]  sda: sda1 sda2 sda3 sda4
[    2.258305] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.362139] hub 1-1:1.0: USB hub found
[    2.362206] hub 1-1:1.0: 8 ports detected
[    2.508258] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.515437] random: fast init done
[    2.518144] usb 2-7: new full-speed USB device number 3 using xhci_hcd
[    2.570456] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.573191] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    2.573314] systemd[1]: Detected architecture x86-64.
[    2.573326] systemd[1]: No hostname configured.
[    2.573329] systemd[1]: Set hostname to <archlinux>.
[    2.626203] systemd[1]: Created slice User and Session Slice.
[    2.626254] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.626349] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.626382] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.626409] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.626431] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.636114] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    2.644803] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[    2.668994] systemd-journald[164]: Received request to flush runtime journal from PID 1
[    2.761532] usb 2-8: new high-speed USB device number 4 using xhci_hcd
[    2.905019] clocksource: Switched to clocksource tsc
[    3.031632] Bluetooth: Core ver 2.22
[    3.031648] NET: Registered protocol family 31
[    3.031649] Bluetooth: HCI device and connection manager initialized
[    3.031652] Bluetooth: HCI socket layer initialized
[    3.031654] Bluetooth: L2CAP socket layer initialized
[    3.031659] Bluetooth: SCO socket layer initialized
[    3.185618] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.187471] usbcore: registered new interface driver btusb
[    3.190383] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    3.190490] ACPI: Lid Switch [LID]
[    3.190543] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.190546] ACPI: Sleep Button [SLPB]
[    3.190609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.190611] ACPI: Power Button [PWRF]
[    3.190635] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    3.190658] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.193972] pps_core: LinuxPPS API ver. 1 registered
[    3.193973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.194681] PTP clock support registered
[    3.194828] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    3.204055] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.204057] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.204146] Bluetooth: hci0: read Intel version: 370710018002030d00
[    3.207754] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.219795] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    3.223400] ACPI: AC Adapter [AC] (off-line)
[    3.223415] Non-volatile memory driver v1.3
[    3.228913] snd_hda_intel: unknown parameter 'vid' ignored
[    3.228915] snd_hda_intel: unknown parameter 'pid' ignored
[    3.228917] snd_hda_intel: unknown parameter 'vid' ignored
[    3.228918] snd_hda_intel: unknown parameter 'pid' ignored
[    3.230060] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    3.230061] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.230062] thinkpad_acpi: ThinkPad BIOS GJET92WW (2.42 ), EC unknown
[    3.230063] thinkpad_acpi: Lenovo ThinkPad T440s, model 20ARS0SY0G
[    3.235023] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.235632] thinkpad_acpi: radio switch found; radios are enabled
[    3.235750] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    3.235750] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    3.238275] ACPI: Battery Slot [BAT0] (battery present)
[    3.245341] ACPI: Battery Slot [BAT1] (battery present)
[    3.245929] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    3.249288] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    3.289549] wmi: Mapper loaded
[    3.313240] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.313602] thermal LNXTHERM:00: registered as thermal_zone0
[    3.313604] ACPI: Thermal Zone [THM0] (26 C)
[    3.329521] Adding 4194300k swap on /dev/sda3.  Priority:-1 extents:1 across:4194300k SSFS
[    3.331638] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.343178] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.343180] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.343181] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.343182] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.343183] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.344151] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    3.344959] Intel(R) Wireless WiFi driver for Linux
[    3.344960] Copyright(c) 2003- 2015 Intel Corporation
[    3.350564] iwlwifi 0000:03:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm
[    3.356077] AVX2 version of gcm_enc/dec engaged.
[    3.356079] AES CTR mode by8 optimization enabled
[    3.374347] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[    3.376803] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    3.377312] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    3.383820] iTCO_vendor_support: vendor-support=0
[    3.384322] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.384367] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    3.384615] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.385961] media: Linux media interface: v0.10
[    3.388710] hidraw: raw HID events driver (C) Jiri Kosina
[    3.391864] Linux video capture interface: v2.00
[    3.399129] usbcore: registered new interface driver usbhid
[    3.399131] usbhid: USB HID core driver
[    3.403384] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7035)
[    3.418718] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    3.431536] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[    3.431538] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
[    3.431539] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[    3.431540] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[    3.431720] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input8
[    3.431900] usbcore: registered new interface driver uvcvideo
[    3.431901] USB Video Class driver (1.1.1)
[    3.435098] intel_rapl: Found RAPL domain package
[    3.435099] intel_rapl: Found RAPL domain core
[    3.435099] intel_rapl: Found RAPL domain uncore
[    3.435100] intel_rapl: Found RAPL domain dram
[    3.441205] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04F3:0224.0001/input/input9
[    3.441516] hid-multitouch 0003:04F3:0224.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.5/input0
[    3.444222] mousedev: PS/2 mouse device common for all mice
[    3.500817] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:72:7e:ad
[    3.500818] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.500854] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    3.500879] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[    3.501353] [drm] Memory usable by graphics device = 2048M
[    3.501355] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    3.501355] fb: switching to inteldrmfb from VESA VGA
[    3.502700] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    3.512537] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.512539] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.512539] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    3.512540] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.512540] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.512541] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    3.512542] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    3.512543] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.533331] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.533435] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.533470] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.533504] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.533537] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.582549] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.583889] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.713557] Console: switching to colour dummy device 80x25
[    3.713643] [drm] Replacing VGA console driver
[    3.718162] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.718164] [drm] Driver supports precise vblank timestamp query.
[    3.718496] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.725883] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    3.726363] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.726619] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[    3.816596] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[    3.847724] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[    3.847731] psmouse serio1: synaptics: Trying to set up SMBus access
[    3.860224] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    3.897976] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2668-002, fw id: 0
[    3.899732] fbcon: inteldrmfb (fb0) is primary device
[    3.947398] input: Synaptics TM2668-002 as /devices/rmi4-00/input/input19
[    4.311647] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    4.363015] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input20
[    4.971812] Console: switching to colour frame buffer device 240x67
[    4.999646] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   24.373972] random: crng init done
[   49.887146] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   49.887659] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   50.090634] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   50.091255] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   50.113899] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   66.031180] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   66.031693] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   66.232309] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   66.232922] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   66.256689] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   69.649286] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[   69.656254] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[   69.658404] wlp3s0: authenticated
[   69.663171] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[   69.665431] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=6)
[   69.667033] wlp3s0: associated
[   69.667073] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   69.766453] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[ 8286.847187] PM: Syncing filesystems ... done.
[ 8286.875292] PM: Preparing system for sleep (mem)
[ 8286.875604] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8286.876852] OOM killer disabled.
[ 8286.876852] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 8286.877478] PM: Suspending system (mem)
[ 8286.877503] Suspending console(s) (use no_console_suspend to debug)
[ 8286.949138] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8286.950510] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8286.953921] sd 0:0:0:0: [sda] Stopping disk
[ 8286.968619] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 8287.161156] e1000e: EEE TX LPI TIMER: 00000011
[ 8287.456991] PM: suspend of devices complete after 579.373 msecs
[ 8287.470917] PM: late suspend of devices complete after 13.909 msecs
[ 8287.473689] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 8287.473838] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 8287.473853] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 8287.514164] PM: noirq suspend of devices complete after 43.242 msecs
[ 8287.514878] ACPI: Preparing to enter system sleep state S3
[ 8287.754173] ACPI : EC: event blocked
[ 8287.754174] ACPI : EC: EC stopped
[ 8287.754176] PM: Saving platform NVS memory
[ 8287.754223] Disabling non-boot CPUs ...
[ 8287.781427] Cannot set affinity for irq 48
[ 8287.783489] smpboot: CPU 1 is now offline
[ 8287.802448] smpboot: CPU 2 is now offline
[ 8287.829006] smpboot: CPU 3 is now offline
[ 8287.831201] ACPI: Low-level resume complete
[ 8287.831259] ACPI : EC: EC started
[ 8287.831260] PM: Restoring platform NVS memory
[ 8287.831595] Suspended for 1057.298 seconds
[ 8287.831618] Enabling non-boot CPUs ...
[ 8287.831652] x86: Booting SMP configuration:
[ 8287.831653] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8287.883044]  cache: parent cpu1 should not be sleeping
[ 8287.883157] CPU1 is up
[ 8287.883174] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 8287.936377]  cache: parent cpu2 should not be sleeping
[ 8287.936500] CPU2 is up
[ 8287.936514] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 8287.989724]  cache: parent cpu3 should not be sleeping
[ 8287.989926] CPU3 is up
[ 8287.994945] ACPI: Waking up from system sleep state S3
[ 8288.523025] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 8288.523074] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 8288.523129] PM: noirq resume of devices complete after 43.422 msecs
[ 8288.523340] PM: early resume of devices complete after 0.192 msecs
[ 8288.523423] usb usb2: root hub lost power or was reset
[ 8288.523426] usb usb3: root hub lost power or was reset
[ 8288.523788] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 8288.524548] ACPI : EC: event unblocked
[ 8288.524965] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 8288.526473] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8288.526973] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8288.533636] sd 0:0:0:0: [sda] Starting disk
[ 8288.725037] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8288.725551] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8288.753162] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 8288.846541] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8288.849324] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8288.849326] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8288.849327] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8288.849391] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 8288.849580] ata1.00: supports DRM functions and may not be fully accessible
[ 8288.854753] ata1.00: NCQ Send/Recv Log not supported
[ 8288.855043] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8288.855045] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8288.855046] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8288.855069] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 8288.855221] ata1.00: supports DRM functions and may not be fully accessible
[ 8288.855319] ata1.00: NCQ Send/Recv Log not supported
[ 8288.855379] ata1.00: configured for UDMA/133
[ 8288.859689] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[ 8289.103046] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[ 8289.176359] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 8289.459771] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[ 8289.608075] PM: resume of devices complete after 1084.758 msecs
[ 8289.608137] usb 2-7:1.0: rebind failed: -517
[ 8289.608140] usb 2-7:1.1: rebind failed: -517
[ 8289.608304] acpi LNXPOWER:02: Turning OFF
[ 8289.608474] PM: Finishing wakeup.
[ 8289.608476] OOM killer enabled.
[ 8289.608476] Restarting tasks ... done.
[ 8289.632924] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 8289.632936] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 8289.776883] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 8293.052799] wlp3s0: authenticate with 40:0d:10:64:e4:09
[ 8293.060252] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[ 8293.064056] wlp3s0: authenticated
[ 8293.066211] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[ 8293.071094] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=1)
[ 8293.080782] wlp3s0: associated
[ 8316.923872] PM: Syncing filesystems ... done.
[ 8316.998982] PM: Preparing system for sleep (mem)
[ 8316.999469] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8317.001009] OOM killer disabled.
[ 8317.001010] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 8317.002208] PM: Suspending system (mem)
[ 8317.002246] Suspending console(s) (use no_console_suspend to debug)
[ 8317.086153] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8317.087441] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8317.092357] sd 0:0:0:0: [sda] Stopping disk
[ 8317.106063] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 8317.312616] e1000e: EEE TX LPI TIMER: 00000011
[ 8318.147692] PM: suspend of devices complete after 1145.314 msecs
[ 8318.162344] PM: late suspend of devices complete after 14.645 msecs
[ 8318.164970] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 8318.165301] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 8318.165454] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 8318.205640] PM: noirq suspend of devices complete after 43.290 msecs
[ 8318.206621] ACPI: Preparing to enter system sleep state S3
[ 8318.445638] ACPI : EC: event blocked
[ 8318.445639] ACPI : EC: EC stopped
[ 8318.445640] PM: Saving platform NVS memory
[ 8318.445694] Disabling non-boot CPUs ...
[ 8318.473955] smpboot: CPU 1 is now offline
[ 8318.508249] smpboot: CPU 2 is now offline
[ 8318.537130] smpboot: CPU 3 is now offline
[ 8318.539327] ACPI: Low-level resume complete
[ 8318.539387] ACPI : EC: EC started
[ 8318.539387] PM: Restoring platform NVS memory
[ 8318.539723] Suspended for 3389.293 seconds
[ 8318.539748] Enabling non-boot CPUs ...
[ 8318.539782] x86: Booting SMP configuration:
[ 8318.539783] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8318.594505]  cache: parent cpu1 should not be sleeping
[ 8318.594619] CPU1 is up
[ 8318.594636] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 8318.647839]  cache: parent cpu2 should not be sleeping
[ 8318.647963] CPU2 is up
[ 8318.647978] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 8318.704516]  cache: parent cpu3 should not be sleeping
[ 8318.704767] CPU3 is up
[ 8318.711558] ACPI: Waking up from system sleep state S3
[ 8319.241124] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 8319.241159] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 8319.241218] PM: noirq resume of devices complete after 43.369 msecs
[ 8319.243295] PM: early resume of devices complete after 2.058 msecs
[ 8319.243359] usb usb2: root hub lost power or was reset
[ 8319.243361] usb usb3: root hub lost power or was reset
[ 8319.243414] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 8319.244481] ACPI : EC: event unblocked
[ 8319.244847] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 8319.245579] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8319.246078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8319.253769] sd 0:0:0:0: [sda] Starting disk
[ 8319.449017] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8319.449530] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 8319.474543] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 8319.568211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8319.571082] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8319.571084] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8319.571085] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8319.571143] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 8319.571292] ata1.00: supports DRM functions and may not be fully accessible
[ 8319.576324] ata1.00: NCQ Send/Recv Log not supported
[ 8319.576683] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8319.576685] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8319.576686] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8319.576745] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 8319.576864] ata1.00: supports DRM functions and may not be fully accessible
[ 8319.576930] ata1.00: NCQ Send/Recv Log not supported
[ 8319.576990] ata1.00: configured for UDMA/133
[ 8319.581178] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[ 8319.897816] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 8319.937904] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[ 8320.181224] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[ 8320.312807] PM: resume of devices complete after 1069.531 msecs
[ 8320.312913] usb 2-7:1.0: rebind failed: -517
[ 8320.312918] usb 2-7:1.1: rebind failed: -517
[ 8320.313199] acpi LNXPOWER:02: Turning OFF
[ 8320.313482] PM: Finishing wakeup.
[ 8320.313485] OOM killer enabled.
[ 8320.313487] Restarting tasks ... done.
[ 8320.341445] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 8320.341498] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 8320.474495] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 8323.778687] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[ 8323.783423] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[ 8323.785645] wlp3s0: authenticated
[ 8323.787684] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[ 8323.789328] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=11)
[ 8323.791230] wlp3s0: associated
[ 8323.793746] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[ 8707.495731] thinkpad_acpi: EC reports that Thermal Table has changed
[ 9722.984355] PM: Syncing filesystems ... done.
[ 9723.007747] PM: Preparing system for sleep (mem)
[ 9723.008098] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9723.009409] OOM killer disabled.
[ 9723.009409] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9723.010514] PM: Suspending system (mem)
[ 9723.010538] Suspending console(s) (use no_console_suspend to debug)
[ 9723.050029] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9723.051531] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9723.059155] sd 0:0:0:0: [sda] Stopping disk
[ 9723.070036] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 9723.260225] e1000e: EEE TX LPI TIMER: 00000011
[ 9723.560532] PM: suspend of devices complete after 549.875 msecs
[ 9723.576618] PM: late suspend of devices complete after 16.080 msecs
[ 9723.578683] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 9723.579277] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 9723.579443] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 9723.619910] PM: noirq suspend of devices complete after 43.288 msecs
[ 9723.620782] ACPI: Preparing to enter system sleep state S3
[ 9723.859920] ACPI : EC: event blocked
[ 9723.859921] ACPI : EC: EC stopped
[ 9723.859922] PM: Saving platform NVS memory
[ 9723.859971] Disabling non-boot CPUs ...
[ 9723.889163] smpboot: CPU 1 is now offline
[ 9723.908202] smpboot: CPU 2 is now offline
[ 9723.934757] smpboot: CPU 3 is now offline
[ 9723.936922] ACPI: Low-level resume complete
[ 9723.936980] ACPI : EC: EC started
[ 9723.936981] PM: Restoring platform NVS memory
[ 9723.937318] Suspended for 36243.570 seconds
[ 9723.937342] Enabling non-boot CPUs ...
[ 9723.937379] x86: Booting SMP configuration:
[ 9723.937379] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9724.018779]  cache: parent cpu1 should not be sleeping
[ 9724.018893] CPU1 is up
[ 9724.018909] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 9724.098776]  cache: parent cpu2 should not be sleeping
[ 9724.098900] CPU2 is up
[ 9724.098915] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9724.182123]  cache: parent cpu3 should not be sleeping
[ 9724.182396] CPU3 is up
[ 9724.189744] ACPI: Waking up from system sleep state S3
[ 9724.722068] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 9724.722102] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9724.722160] PM: noirq resume of devices complete after 46.706 msecs
[ 9724.724257] PM: early resume of devices complete after 2.077 msecs
[ 9724.724332] usb usb2: root hub lost power or was reset
[ 9724.724334] usb usb3: root hub lost power or was reset
[ 9724.724451] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 9724.724909] ACPI : EC: event unblocked
[ 9724.725263] sd 0:0:0:0: [sda] Starting disk
[ 9724.725542] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 9724.727411] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9724.727906] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9724.926360] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9724.926861] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 9724.952036] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 9725.038948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9725.041591] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9725.041593] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9725.041595] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9725.041623] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 9725.041774] ata1.00: supports DRM functions and may not be fully accessible
[ 9725.046982] ata1.00: NCQ Send/Recv Log not supported
[ 9725.047354] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9725.047357] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9725.047359] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9725.047383] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 9725.047514] ata1.00: supports DRM functions and may not be fully accessible
[ 9725.047592] ata1.00: NCQ Send/Recv Log not supported
[ 9725.047656] ata1.00: configured for UDMA/133
[ 9725.062086] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[ 9725.305471] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[ 9725.375383] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[ 9725.548797] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[ 9725.805053] PM: resume of devices complete after 1080.816 msecs
[ 9725.805158] usb 2-7:1.0: rebind failed: -517
[ 9725.805163] usb 2-7:1.1: rebind failed: -517
[ 9725.805486] acpi LNXPOWER:02: Turning OFF
[ 9725.805779] PM: Finishing wakeup.
[ 9725.805782] OOM killer enabled.
[ 9725.805783] Restarting tasks ... done.
[ 9725.835507] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 9725.835512] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 9725.994511] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 9729.236426] wlp3s0: authenticate with 40:0d:10:64:e4:09
[ 9729.244016] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[ 9729.247630] wlp3s0: authenticated
[ 9729.252023] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[ 9729.256872] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=4)
[ 9729.258372] wlp3s0: associated
[10019.918850] PM: Syncing filesystems ... done.
[10019.937887] PM: Preparing system for sleep (mem)
[10019.938354] Freezing user space processes ... (elapsed 0.001 seconds) done.
[10019.939848] OOM killer disabled.
[10019.939849] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10019.941100] PM: Suspending system (mem)
[10019.941125] Suspending console(s) (use no_console_suspend to debug)
[10020.017741] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[10020.018642] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10020.021819] sd 0:0:0:0: [sda] Stopping disk
[10020.036819] psmouse serio1: Failed to disable mouse on isa0060/serio1
[10020.228435] e1000e: EEE TX LPI TIMER: 00000011
[10020.518818] PM: suspend of devices complete after 577.575 msecs
[10020.534819] PM: late suspend of devices complete after 15.998 msecs
[10020.537629] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[10020.537662] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[10020.537690] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[10020.578156] PM: noirq suspend of devices complete after 43.321 msecs
[10020.579028] ACPI: Preparing to enter system sleep state S3
[10020.818157] ACPI : EC: event blocked
[10020.818158] ACPI : EC: EC stopped
[10020.818159] PM: Saving platform NVS memory
[10020.818206] Disabling non-boot CPUs ...
[10020.847309] smpboot: CPU 1 is now offline
[10020.866428] smpboot: CPU 2 is now offline
[10020.892994] smpboot: CPU 3 is now offline
[10020.895139] ACPI: Low-level resume complete
[10020.895198] ACPI : EC: EC started
[10020.895199] PM: Restoring platform NVS memory
[10020.895538] Suspended for 6034.036 seconds
[10020.895561] Enabling non-boot CPUs ...
[10020.895595] x86: Booting SMP configuration:
[10020.895596] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10020.947039]  cache: parent cpu1 should not be sleeping
[10020.947153] CPU1 is up
[10020.947169] smpboot: Booting Node 0 Processor 2 APIC 0x2
[10021.000372]  cache: parent cpu2 should not be sleeping
[10021.000497] CPU2 is up
[10021.000512] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10021.057052]  cache: parent cpu3 should not be sleeping
[10021.057292] CPU3 is up
[10021.063665] ACPI: Waking up from system sleep state S3
[10021.357237] thinkpad_acpi: EC reports that Thermal Table has changed
[10021.640325] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[10021.640361] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[10021.640412] PM: noirq resume of devices complete after 43.368 msecs
[10021.642516] PM: early resume of devices complete after 2.086 msecs
[10021.642602] usb usb2: root hub lost power or was reset
[10021.642604] usb usb3: root hub lost power or was reset
[10021.642639] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[10021.642745] ACPI : EC: event unblocked
[10021.643562] rtc_cmos 00:02: System wakeup disabled by ACPI
[10021.643956] sd 0:0:0:0: [sda] Starting disk
[10021.646268] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10021.646771] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10021.843835] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10021.844343] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10021.870301] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[10021.957276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10021.960211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10021.960215] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10021.960217] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10021.960255] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[10021.960435] ata1.00: supports DRM functions and may not be fully accessible
[10021.965546] ata1.00: NCQ Send/Recv Log not supported
[10021.965962] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10021.965966] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10021.965968] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10021.965994] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[10021.966131] ata1.00: supports DRM functions and may not be fully accessible
[10021.966226] ata1.00: NCQ Send/Recv Log not supported
[10021.966291] ata1.00: configured for UDMA/133
[10021.980322] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[10022.223696] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[10022.293670] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[10022.467024] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[10022.723246] PM: resume of devices complete after 1080.752 msecs
[10022.723325] usb 2-7:1.0: rebind failed: -517
[10022.723329] usb 2-7:1.1: rebind failed: -517
[10022.723538] acpi LNXPOWER:02: Turning OFF
[10022.723805] PM: Finishing wakeup.
[10022.723807] OOM killer enabled.
[10022.723808] Restarting tasks ... done.
[10022.754655] Bluetooth: hci0: read Intel version: 370710018002030d00
[10022.754700] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[10022.912794] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[10563.500010] PM: Syncing filesystems ... done.
[10563.515280] PM: Preparing system for sleep (mem)
[10563.515657] Freezing user space processes ... (elapsed 0.001 seconds) done.
[10563.516994] OOM killer disabled.
[10563.516995] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10563.518107] PM: Suspending system (mem)
[10563.518134] Suspending console(s) (use no_console_suspend to debug)
[10563.582945] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10563.587710] sd 0:0:0:0: [sda] Stopping disk
[10563.604756] psmouse serio1: Failed to disable mouse on isa0060/serio1
[10563.810731] e1000e: EEE TX LPI TIMER: 00000011
[10564.476152] PM: suspend of devices complete after 957.907 msecs
[10564.490335] PM: late suspend of devices complete after 14.178 msecs
[10564.492826] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[10564.493020] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[10564.493078] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[10564.533647] PM: noirq suspend of devices complete after 43.308 msecs
[10564.534361] ACPI: Preparing to enter system sleep state S3
[10564.773668] ACPI : EC: event blocked
[10564.773669] ACPI : EC: EC stopped
[10564.773670] PM: Saving platform NVS memory
[10564.773717] Disabling non-boot CPUs ...
[10564.802974] smpboot: CPU 1 is now offline
[10564.821929] smpboot: CPU 2 is now offline
[10564.855178] smpboot: CPU 3 is now offline
[10564.857368] ACPI: Low-level resume complete
[10564.857429] ACPI : EC: EC started
[10564.857429] PM: Restoring platform NVS memory
[10564.857775] Suspended for 163.026 seconds
[10564.857798] Enabling non-boot CPUs ...
[10564.857832] x86: Booting SMP configuration:
[10564.857832] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10564.909226]  cache: parent cpu1 should not be sleeping
[10564.909340] CPU1 is up
[10564.909357] smpboot: Booting Node 0 Processor 2 APIC 0x2
[10564.962558]  cache: parent cpu2 should not be sleeping
[10564.962683] CPU2 is up
[10564.962697] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10565.019237]  cache: parent cpu3 should not be sleeping
[10565.019439] CPU3 is up
[10565.024469] ACPI: Waking up from system sleep state S3
[10565.552512] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[10565.552548] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[10565.552606] PM: noirq resume of devices complete after 43.359 msecs
[10565.554711] PM: early resume of devices complete after 2.086 msecs
[10565.554799] usb usb2: root hub lost power or was reset
[10565.554801] usb usb3: root hub lost power or was reset
[10565.555557] sd 0:0:0:0: [sda] Starting disk
[10565.555615] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[10565.555866] ACPI : EC: event unblocked
[10565.556233] rtc_cmos 00:02: System wakeup disabled by ACPI
[10565.556810] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10565.557308] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10565.752167] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10565.752692] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10565.785866] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[10565.869892] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10565.872672] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10565.872674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10565.872675] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10565.872739] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[10565.872928] ata1.00: supports DRM functions and may not be fully accessible
[10565.878325] ata1.00: NCQ Send/Recv Log not supported
[10565.878603] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10565.878604] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10565.878605] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10565.878658] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[10565.878812] ata1.00: supports DRM functions and may not be fully accessible
[10565.878911] ata1.00: NCQ Send/Recv Log not supported
[10565.878971] ata1.00: configured for UDMA/133
[10565.892572] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[10566.135936] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[10566.209219] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[10566.492616] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[10566.625613] PM: resume of devices complete after 1070.922 msecs
[10566.625719] usb 2-7:1.0: rebind failed: -517
[10566.625724] usb 2-7:1.1: rebind failed: -517
[10566.626037] acpi LNXPOWER:02: Turning OFF
[10566.626319] PM: Finishing wakeup.
[10566.626321] OOM killer enabled.
[10566.626323] Restarting tasks ... done.
[10566.660787] Bluetooth: hci0: read Intel version: 370710018002030d00
[10566.660791] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[10566.794794] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11190.670767] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[11264.990525] PM: Syncing filesystems ... done.
[11265.005302] PM: Preparing system for sleep (mem)
[11265.005665] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11265.007085] OOM killer disabled.
[11265.007086] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11265.008226] PM: Suspending system (mem)
[11265.008251] Suspending console(s) (use no_console_suspend to debug)
[11265.059709] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11265.060679] sd 0:0:0:0: [sda] Stopping disk
[11265.080877] psmouse serio1: Failed to disable mouse on isa0060/serio1
[11265.272265] e1000e: EEE TX LPI TIMER: 00000011
[11265.567091] PM: suspend of devices complete after 558.722 msecs
[11265.585463] PM: late suspend of devices complete after 18.365 msecs
[11265.588469] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11265.588506] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[11265.588679] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11265.628644] PM: noirq suspend of devices complete after 43.175 msecs
[11265.629624] ACPI: Preparing to enter system sleep state S3
[11265.868644] ACPI : EC: event blocked
[11265.868646] ACPI : EC: EC stopped
[11265.868647] PM: Saving platform NVS memory
[11265.868699] Disabling non-boot CPUs ...
[11265.897949] smpboot: CPU 1 is now offline
[11265.916937] smpboot: CPU 2 is now offline
[11265.946818] smpboot: CPU 3 is now offline
[11265.949022] ACPI: Low-level resume complete
[11265.949080] ACPI : EC: EC started
[11265.949081] PM: Restoring platform NVS memory
[11265.949420] Suspended for 31399.893 seconds
[11265.949443] Enabling non-boot CPUs ...
[11265.949476] x86: Booting SMP configuration:
[11265.949476] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11266.004211]  cache: parent cpu1 should not be sleeping
[11266.004328] CPU1 is up
[11266.004344] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11266.057542]  cache: parent cpu2 should not be sleeping
[11266.057668] CPU2 is up
[11266.057683] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11266.114221]  cache: parent cpu3 should not be sleeping
[11266.114459] CPU3 is up
[11266.120841] ACPI: Waking up from system sleep state S3
[11266.650828] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11266.650865] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11266.650920] PM: noirq resume of devices complete after 43.371 msecs
[11266.653025] PM: early resume of devices complete after 2.086 msecs
[11266.653119] usb usb2: root hub lost power or was reset
[11266.653121] usb usb3: root hub lost power or was reset
[11266.653181] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[11266.653918] sd 0:0:0:0: [sda] Starting disk
[11266.654277] ACPI : EC: event unblocked
[11266.654687] rtc_cmos 00:02: System wakeup disabled by ACPI
[11266.655382] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11266.655879] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11266.867733] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11266.868244] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11266.884165] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[11266.967939] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11266.970609] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11266.970610] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11266.970611] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11266.970675] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11266.970860] ata1.00: supports DRM functions and may not be fully accessible
[11266.976092] ata1.00: NCQ Send/Recv Log not supported
[11266.976388] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11266.976389] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11266.976390] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11266.976412] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11266.976562] ata1.00: supports DRM functions and may not be fully accessible
[11266.976681] ata1.00: NCQ Send/Recv Log not supported
[11266.976740] ata1.00: configured for UDMA/133
[11266.990880] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[11267.234212] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[11267.307511] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[11267.590904] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[11267.723848] PM: resume of devices complete after 1070.843 msecs
[11267.723948] usb 2-7:1.0: rebind failed: -517
[11267.723952] usb 2-7:1.1: rebind failed: -517
[11267.724249] acpi LNXPOWER:02: Turning OFF
[11267.724507] PM: Finishing wakeup.
[11267.724510] OOM killer enabled.
[11267.724511] Restarting tasks ... done.
[11267.752242] Bluetooth: hci0: read Intel version: 370710018002030d00
[11267.752294] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11267.873273] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11272.053722] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[11272.059389] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[11272.061534] wlp3s0: authenticated
[11272.064022] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[11272.065746] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=2)
[11272.068829] wlp3s0: associated
[11272.068886] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[11281.790744] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[11281.977383] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11281.977899] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11282.175470] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11282.176115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11282.199475] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[11285.673199] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[11285.679864] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[11285.682167] wlp3s0: authenticated
[11285.683877] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[11285.685632] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=2)
[11285.688519] wlp3s0: associated
[11285.688587] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[11285.688656] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[11571.454925] PM: Syncing filesystems ... done.
[11571.480965] PM: Preparing system for sleep (mem)
[11571.481493] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11571.483009] OOM killer disabled.
[11571.483010] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11571.484185] PM: Suspending system (mem)
[11571.484221] Suspending console(s) (use no_console_suspend to debug)
[11571.542883] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[11571.547673] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11571.551681] sd 0:0:0:0: [sda] Stopping disk
[11571.565756] psmouse serio1: Failed to disable mouse on isa0060/serio1
[11571.770375] e1000e: EEE TX LPI TIMER: 00000011
[11572.404411] PM: suspend of devices complete after 920.021 msecs
[11572.420001] PM: late suspend of devices complete after 15.587 msecs
[11572.422624] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11572.422722] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[11572.422736] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11572.463334] PM: noirq suspend of devices complete after 43.329 msecs
[11572.464048] ACPI: Preparing to enter system sleep state S3
[11572.703335] ACPI : EC: event blocked
[11572.703336] ACPI : EC: EC stopped
[11572.703337] PM: Saving platform NVS memory
[11572.703377] Disabling non-boot CPUs ...
[11572.732495] smpboot: CPU 1 is now offline
[11572.754947] smpboot: CPU 2 is now offline
[11572.781506] smpboot: CPU 3 is now offline
[11572.783681] ACPI: Low-level resume complete
[11572.783739] ACPI : EC: EC started
[11572.783740] PM: Restoring platform NVS memory
[11572.784078] Suspended for 965.160 seconds
[11572.784102] Enabling non-boot CPUs ...
[11572.784136] x86: Booting SMP configuration:
[11572.784136] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11572.838887]  cache: parent cpu1 should not be sleeping
[11572.839003] CPU1 is up
[11572.839019] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11572.892219]  cache: parent cpu2 should not be sleeping
[11572.892343] CPU2 is up
[11572.892358] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11572.945567]  cache: parent cpu3 should not be sleeping
[11572.945767] CPU3 is up
[11572.950790] ACPI: Waking up from system sleep state S3
[11573.478839] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11573.478873] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11573.478922] PM: noirq resume of devices complete after 43.337 msecs
[11573.481026] PM: early resume of devices complete after 2.085 msecs
[11573.481120] usb usb2: root hub lost power or was reset
[11573.481122] usb usb3: root hub lost power or was reset
[11573.481200] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[11573.482241] ACPI : EC: event unblocked
[11573.482641] rtc_cmos 00:02: System wakeup disabled by ACPI
[11573.483917] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11573.484413] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11573.491337] sd 0:0:0:0: [sda] Starting disk
[11573.691288] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11573.691827] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11573.712201] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[11573.805915] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11573.808615] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11573.808616] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11573.808617] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11573.808680] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11573.808830] ata1.00: supports DRM functions and may not be fully accessible
[11573.814060] ata1.00: NCQ Send/Recv Log not supported
[11573.814402] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11573.814404] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11573.814405] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11573.814430] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11573.814596] ata1.00: supports DRM functions and may not be fully accessible
[11573.814730] ata1.00: NCQ Send/Recv Log not supported
[11573.814792] ata1.00: configured for UDMA/133
[11573.818892] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[11574.062230] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[11574.135530] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[11574.305568] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[11574.561837] PM: resume of devices complete after 1080.831 msecs
[11574.561938] usb 2-7:1.0: rebind failed: -517
[11574.561943] usb 2-7:1.1: rebind failed: -517
[11574.562260] acpi LNXPOWER:02: Turning OFF
[11574.562555] PM: Finishing wakeup.
[11574.562557] OOM killer enabled.
[11574.562559] Restarting tasks ... done.
[11574.585396] Bluetooth: hci0: read Intel version: 370710018002030d00
[11574.585402] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11574.740410] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11578.029892] wlp3s0: authenticate with 40:0d:10:64:e4:09
[11578.037032] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[11578.040503] wlp3s0: authenticated
[11578.045456] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[11578.050361] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=3)
[11578.059850] wlp3s0: associated
[11672.710427] PM: Syncing filesystems ... done.
[11672.733886] PM: Preparing system for sleep (mem)
[11672.734433] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11672.735930] OOM killer disabled.
[11672.735931] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11672.737115] PM: Suspending system (mem)
[11672.737146] Suspending console(s) (use no_console_suspend to debug)
[11672.770788] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[11672.771890] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11672.780649] sd 0:0:0:0: [sda] Stopping disk
[11672.790180] psmouse serio1: Failed to disable mouse on isa0060/serio1
[11672.996685] e1000e: EEE TX LPI TIMER: 00000011
[11673.770626] PM: suspend of devices complete after 1033.340 msecs
[11673.786436] PM: late suspend of devices complete after 15.805 msecs
[11673.789099] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11673.789211] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[11673.789285] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11673.829739] PM: noirq suspend of devices complete after 43.300 msecs
[11673.830453] ACPI: Preparing to enter system sleep state S3
[11674.069748] ACPI : EC: event blocked
[11674.069749] ACPI : EC: EC stopped
[11674.069750] PM: Saving platform NVS memory
[11674.069798] Disabling non-boot CPUs ...
[11674.099004] smpboot: CPU 1 is now offline
[11674.118021] smpboot: CPU 2 is now offline
[11674.144569] smpboot: CPU 3 is now offline
[11674.146732] ACPI: Low-level resume complete
[11674.146791] ACPI : EC: EC started
[11674.146791] PM: Restoring platform NVS memory
[11674.147124] Suspended for 157.636 seconds
[11674.147147] Enabling non-boot CPUs ...
[11674.147181] x86: Booting SMP configuration:
[11674.147182] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11674.198614]  cache: parent cpu1 should not be sleeping
[11674.198726] CPU1 is up
[11674.198742] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11674.251947]  cache: parent cpu2 should not be sleeping
[11674.252072] CPU2 is up
[11674.252086] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11674.308627]  cache: parent cpu3 should not be sleeping
[11674.308828] CPU3 is up
[11674.313851] ACPI: Waking up from system sleep state S3
[11674.841896] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11674.841931] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11674.841982] PM: noirq resume of devices complete after 43.343 msecs
[11674.844102] PM: early resume of devices complete after 2.100 msecs
[11674.844189] usb usb2: root hub lost power or was reset
[11674.844191] usb usb3: root hub lost power or was reset
[11674.844262] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[11674.844811] ACPI : EC: event unblocked
[11674.845445] rtc_cmos 00:02: System wakeup disabled by ACPI
[11674.846483] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11674.846981] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11674.854439] sd 0:0:0:0: [sda] Starting disk
[11675.046241] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11675.046755] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11675.072281] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[11675.169092] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11675.171789] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11675.171790] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11675.171791] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11675.171854] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11675.172043] ata1.00: supports DRM functions and may not be fully accessible
[11675.177208] ata1.00: NCQ Send/Recv Log not supported
[11675.177511] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11675.177513] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11675.177515] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11675.177537] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11675.177711] ata1.00: supports DRM functions and may not be fully accessible
[11675.177837] ata1.00: NCQ Send/Recv Log not supported
[11675.177898] ata1.00: configured for UDMA/133
[11675.181973] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[11675.425327] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[11675.495264] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[11675.668640] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[11675.924852] PM: resume of devices complete after 1080.770 msecs
[11675.924953] usb 2-7:1.0: rebind failed: -517
[11675.924958] usb 2-7:1.1: rebind failed: -517
[11675.925275] acpi LNXPOWER:02: Turning OFF
[11675.925576] PM: Finishing wakeup.
[11675.925579] OOM killer enabled.
[11675.925580] Restarting tasks ... done.
[11675.953266] Bluetooth: hci0: read Intel version: 370710018002030d00
[11675.953351] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11676.093265] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11679.309614] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[11679.315544] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[11679.317504] wlp3s0: authenticated
[11679.321816] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[11679.324411] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=2)
[11679.326106] wlp3s0: associated
[11679.426678] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[11702.857555] PM: Syncing filesystems ... done.
[11702.930804] PM: Preparing system for sleep (mem)
[11702.931159] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11702.932650] OOM killer disabled.
[11702.932651] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11702.933856] PM: Suspending system (mem)
[11702.933888] Suspending console(s) (use no_console_suspend to debug)
[11703.006019] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[11703.006982] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11703.012122] sd 0:0:0:0: [sda] Stopping disk
[11703.026030] psmouse serio1: Failed to disable mouse on isa0060/serio1
[11703.218139] e1000e: EEE TX LPI TIMER: 00000011
[11704.057734] PM: suspend of devices complete after 1123.679 msecs
[11704.074547] PM: late suspend of devices complete after 16.809 msecs
[11704.077206] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11704.077363] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[11704.077383] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11704.117873] PM: noirq suspend of devices complete after 43.323 msecs
[11704.118527] ACPI: Preparing to enter system sleep state S3
[11704.357881] ACPI : EC: event blocked
[11704.357882] ACPI : EC: EC stopped
[11704.357883] PM: Saving platform NVS memory
[11704.357920] Disabling non-boot CPUs ...
[11704.385995] smpboot: CPU 1 is now offline
[11704.406129] smpboot: CPU 2 is now offline
[11704.432710] smpboot: CPU 3 is now offline
[11704.434928] ACPI: Low-level resume complete
[11704.434988] ACPI : EC: EC started
[11704.434988] PM: Restoring platform NVS memory
[11704.435334] Suspended for 42.713 seconds
[11704.435357] Enabling non-boot CPUs ...
[11704.435392] x86: Booting SMP configuration:
[11704.435392] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11704.486774]  cache: parent cpu1 should not be sleeping
[11704.486887] CPU1 is up
[11704.486904] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11704.540106]  cache: parent cpu2 should not be sleeping
[11704.540229] CPU2 is up
[11704.540243] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11704.593452]  cache: parent cpu3 should not be sleeping
[11704.593649] CPU3 is up
[11704.598677] ACPI: Waking up from system sleep state S3
[11705.126753] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11705.126819] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11705.126874] PM: noirq resume of devices complete after 43.436 msecs
[11705.128965] PM: early resume of devices complete after 2.072 msecs
[11705.129033] usb usb2: root hub lost power or was reset
[11705.129035] usb usb3: root hub lost power or was reset
[11705.129088] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[11705.130155] ACPI : EC: event unblocked
[11705.130568] rtc_cmos 00:02: System wakeup disabled by ACPI
[11705.131309] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11705.131802] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11705.139289] sd 0:0:0:0: [sda] Starting disk
[11705.345936] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11705.346447] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[11705.356841] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[11705.453812] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11705.456396] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11705.456397] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11705.456398] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11705.456462] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11705.456650] ata1.00: supports DRM functions and may not be fully accessible
[11705.461892] ata1.00: NCQ Send/Recv Log not supported
[11705.462231] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[11705.462233] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[11705.462234] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[11705.462256] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[11705.462428] ata1.00: supports DRM functions and may not be fully accessible
[11705.462592] ata1.00: NCQ Send/Recv Log not supported
[11705.462656] ata1.00: configured for UDMA/133
[11705.466778] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[11705.710070] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[11705.780080] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[11705.953462] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[11706.209845] PM: resume of devices complete after 1080.900 msecs
[11706.209953] usb 2-7:1.0: rebind failed: -517
[11706.209958] usb 2-7:1.1: rebind failed: -517
[11706.210379] acpi LNXPOWER:02: Turning OFF
[11706.210715] PM: Finishing wakeup.
[11706.210718] OOM killer enabled.
[11706.210719] Restarting tasks ... done.
[11706.234093] Bluetooth: hci0: read Intel version: 370710018002030d00
[11706.234099] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11706.336348] wlp3s0: authenticate with 40:0d:10:64:e4:09
[11706.343002] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[11706.346066] wlp3s0: authenticated
[11706.346710] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[11706.351478] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=3)
[11706.353232] wlp3s0: associated
[11706.414022] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[13459.020043] PM: Syncing filesystems ... done.
[13459.039429] PM: Preparing system for sleep (mem)
[13459.039782] Freezing user space processes ... (elapsed 0.001 seconds) done.
[13459.040963] OOM killer disabled.
[13459.040964] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13459.042086] PM: Suspending system (mem)
[13459.042109] Suspending console(s) (use no_console_suspend to debug)
[13459.075325] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[13459.076593] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13459.084707] sd 0:0:0:0: [sda] Stopping disk
[13459.095258] psmouse serio1: Failed to disable mouse on isa0060/serio1
[13459.300467] e1000e: EEE TX LPI TIMER: 00000011
[13459.606150] PM: suspend of devices complete after 563.926 msecs
[13459.620230] PM: late suspend of devices complete after 14.062 msecs
[13459.622850] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13459.622975] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[13459.622989] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[13459.663552] PM: noirq suspend of devices complete after 43.318 msecs
[13459.664206] ACPI: Preparing to enter system sleep state S3
[13459.903562] ACPI : EC: event blocked
[13459.903563] ACPI : EC: EC stopped
[13459.903564] PM: Saving platform NVS memory
[13459.903607] Disabling non-boot CPUs ...
[13459.932629] smpboot: CPU 1 is now offline
[13459.951792] smpboot: CPU 2 is now offline
[13459.985044] smpboot: CPU 3 is now offline
[13459.987207] ACPI: Low-level resume complete
[13459.987266] ACPI : EC: EC started
[13459.987266] PM: Restoring platform NVS memory
[13459.987603] Suspended for 693.406 seconds
[13459.987626] Enabling non-boot CPUs ...
[13459.987663] x86: Booting SMP configuration:
[13459.987663] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13460.039092]  cache: parent cpu1 should not be sleeping
[13460.039206] CPU1 is up
[13460.039223] smpboot: Booting Node 0 Processor 2 APIC 0x2
[13460.092426]  cache: parent cpu2 should not be sleeping
[13460.092554] CPU2 is up
[13460.092569] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13460.145772]  cache: parent cpu3 should not be sleeping
[13460.145977] CPU3 is up
[13460.151005] ACPI: Waking up from system sleep state S3
[13460.679075] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13460.679142] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[13460.679209] PM: noirq resume of devices complete after 43.430 msecs
[13460.681329] PM: early resume of devices complete after 2.100 msecs
[13460.681418] usb usb2: root hub lost power or was reset
[13460.681420] usb usb3: root hub lost power or was reset
[13460.681449] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[13460.681574] ACPI : EC: event unblocked
[13460.682463] rtc_cmos 00:02: System wakeup disabled by ACPI
[13460.683514] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[13460.684006] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[13460.691753] sd 0:0:0:0: [sda] Starting disk
[13460.883374] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[13460.883891] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[13460.912387] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[13461.005949] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13461.008612] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13461.008614] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13461.008615] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13461.008654] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[13461.008802] ata1.00: supports DRM functions and may not be fully accessible
[13461.013793] ata1.00: NCQ Send/Recv Log not supported
[13461.014135] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[13461.014137] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[13461.014139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[13461.014160] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[13461.014278] ata1.00: supports DRM functions and may not be fully accessible
[13461.014351] ata1.00: NCQ Send/Recv Log not supported
[13461.014411] ata1.00: configured for UDMA/133
[13461.019039] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[13461.262421] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[13461.335737] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[13461.619127] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[13461.750763] PM: resume of devices complete after 1069.454 msecs
[13461.750862] usb 2-7:1.0: rebind failed: -517
[13461.750866] usb 2-7:1.1: rebind failed: -517
[13461.751115] acpi LNXPOWER:02: Turning OFF
[13461.751368] PM: Finishing wakeup.
[13461.751370] OOM killer enabled.
[13461.751372] Restarting tasks ... done.
[13461.788286] Bluetooth: hci0: read Intel version: 370710018002030d00
[13461.788335] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[13461.909300] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[13465.168054] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[13465.173811] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[13465.175552] wlp3s0: authenticated
[13465.178919] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[13465.180523] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=9)
[13465.184016] wlp3s0: associated
[13465.184057] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[14206.722899] PM: Syncing filesystems ... done.
[14206.752321] PM: Preparing system for sleep (mem)
[14206.752684] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14206.754021] OOM killer disabled.
[14206.754022] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14206.755124] PM: Suspending system (mem)
[14206.755147] Suspending console(s) (use no_console_suspend to debug)
[14206.811294] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[14206.814406] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14206.822804] sd 0:0:0:0: [sda] Stopping disk
[14206.833034] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14207.041108] e1000e: EEE TX LPI TIMER: 00000011
[14207.343319] PM: suspend of devices complete after 588.064 msecs
[14207.357370] PM: late suspend of devices complete after 14.048 msecs
[14207.359058] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14207.359999] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14207.360043] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14207.400687] PM: noirq suspend of devices complete after 43.313 msecs
[14207.401342] ACPI: Preparing to enter system sleep state S3
[14207.640697] ACPI : EC: event blocked
[14207.640698] ACPI : EC: EC stopped
[14207.640699] PM: Saving platform NVS memory
[14207.640743] Disabling non-boot CPUs ...
[14207.669766] smpboot: CPU 1 is now offline
[14207.692297] smpboot: CPU 2 is now offline
[14207.725534] smpboot: CPU 3 is now offline
[14207.727695] ACPI: Low-level resume complete
[14207.727754] ACPI : EC: EC started
[14207.727754] PM: Restoring platform NVS memory
[14207.728093] Suspended for 803.243 seconds
[14207.728117] Enabling non-boot CPUs ...
[14207.728151] x86: Booting SMP configuration:
[14207.728151] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14207.782895]  cache: parent cpu1 should not be sleeping
[14207.783009] CPU1 is up
[14207.783025] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14207.836228]  cache: parent cpu2 should not be sleeping
[14207.836354] CPU2 is up
[14207.836369] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14207.889575]  cache: parent cpu3 should not be sleeping
[14207.889812] CPU3 is up
[14207.896163] ACPI: Waking up from system sleep state S3
[14208.426207] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14208.426265] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14208.426327] PM: noirq resume of devices complete after 43.424 msecs
[14208.428433] PM: early resume of devices complete after 2.086 msecs
[14208.428487] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14208.428525] usb usb2: root hub lost power or was reset
[14208.428527] usb usb3: root hub lost power or was reset
[14208.429642] ACPI : EC: event unblocked
[14208.430049] rtc_cmos 00:02: System wakeup disabled by ACPI
[14208.430799] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.431298] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.438752] sd 0:0:0:0: [sda] Starting disk
[14208.636344] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.636858] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14208.656198] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14208.753145] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14208.755847] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14208.755849] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14208.755850] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14208.755872] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14208.755992] ata1.00: supports DRM functions and may not be fully accessible
[14208.761143] ata1.00: NCQ Send/Recv Log not supported
[14208.761527] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14208.761529] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14208.761531] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14208.761553] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14208.761672] ata1.00: supports DRM functions and may not be fully accessible
[14208.761739] ata1.00: NCQ Send/Recv Log not supported
[14208.761799] ata1.00: configured for UDMA/133
[14208.766251] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14209.009553] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14209.079547] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14209.366262] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14209.497879] PM: resume of devices complete after 1069.466 msecs
[14209.497985] usb 2-7:1.0: rebind failed: -517
[14209.497990] usb 2-7:1.1: rebind failed: -517
[14209.498263] acpi LNXPOWER:02: Turning OFF
[14209.498539] PM: Finishing wakeup.
[14209.498542] OOM killer enabled.
[14209.498543] Restarting tasks ... done.
[14209.539591] Bluetooth: hci0: read Intel version: 370710018002030d00
[14209.539594] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14209.693725] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14212.882017] wlp3s0: authenticate with 40:0d:10:64:e4:09
[14212.888860] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[14212.892166] wlp3s0: authenticated
[14212.892772] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[14212.897574] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=2)
[14212.898917] wlp3s0: associated
[14378.386025] PM: Syncing filesystems ... done.
[14378.404468] PM: Preparing system for sleep (mem)
[14378.404981] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14378.406505] OOM killer disabled.
[14378.406506] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14378.407706] PM: Suspending system (mem)
[14378.407741] Suspending console(s) (use no_console_suspend to debug)
[14378.451564] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[14378.452669] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14378.462241] sd 0:0:0:0: [sda] Stopping disk
[14378.470350] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14378.662376] e1000e: EEE TX LPI TIMER: 00000011
[14379.428622] PM: suspend of devices complete after 1020.730 msecs
[14379.445351] PM: late suspend of devices complete after 16.724 msecs
[14379.448212] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14379.448338] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14379.448351] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14379.488673] PM: noirq suspend of devices complete after 43.317 msecs
[14379.489457] ACPI: Preparing to enter system sleep state S3
[14379.728682] ACPI : EC: event blocked
[14379.728683] ACPI : EC: EC stopped
[14379.728684] PM: Saving platform NVS memory
[14379.728732] Disabling non-boot CPUs ...
[14379.757992] smpboot: CPU 1 is now offline
[14379.776959] smpboot: CPU 2 is now offline
[14379.803500] smpboot: CPU 3 is now offline
[14379.805650] ACPI: Low-level resume complete
[14379.805708] ACPI : EC: EC started
[14379.805709] PM: Restoring platform NVS memory
[14379.806048] Suspended for 1446.920 seconds
[14379.806072] Enabling non-boot CPUs ...
[14379.806108] x86: Booting SMP configuration:
[14379.806109] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14379.860877]  cache: parent cpu1 should not be sleeping
[14379.860991] CPU1 is up
[14379.861008] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14379.914210]  cache: parent cpu2 should not be sleeping
[14379.914334] CPU2 is up
[14379.914349] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14379.970890]  cache: parent cpu3 should not be sleeping
[14379.971126] CPU3 is up
[14379.977489] ACPI: Waking up from system sleep state S3
[14380.507531] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14380.507589] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14380.507642] PM: noirq resume of devices complete after 43.424 msecs
[14380.509722] PM: early resume of devices complete after 2.060 msecs
[14380.509789] usb usb2: root hub lost power or was reset
[14380.509791] usb usb3: root hub lost power or was reset
[14380.509846] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14380.509945] ACPI : EC: event unblocked
[14380.510938] sd 0:0:0:0: [sda] Starting disk
[14380.511148] rtc_cmos 00:02: System wakeup disabled by ACPI
[14380.513088] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.513735] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.724371] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.724885] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14380.740852] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14380.824279] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14380.827213] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14380.827215] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14380.827217] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14380.827239] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14380.827358] ata1.00: supports DRM functions and may not be fully accessible
[14380.832353] ata1.00: NCQ Send/Recv Log not supported
[14380.832716] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14380.832718] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14380.832719] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14380.832764] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14380.832906] ata1.00: supports DRM functions and may not be fully accessible
[14380.833000] ata1.00: NCQ Send/Recv Log not supported
[14380.833062] ata1.00: configured for UDMA/133
[14380.847512] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14381.090902] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14381.164185] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14381.334204] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14381.590453] PM: resume of devices complete after 1080.753 msecs
[14381.590525] usb 2-7:1.0: rebind failed: -517
[14381.590529] usb 2-7:1.1: rebind failed: -517
[14381.590719] acpi LNXPOWER:02: Turning OFF
[14381.590964] PM: Finishing wakeup.
[14381.590966] OOM killer enabled.
[14381.590967] Restarting tasks ... done.
[14381.620754] Bluetooth: hci0: read Intel version: 370710018002030d00
[14381.620820] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14381.750795] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14385.055498] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[14385.060845] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[14385.062799] wlp3s0: authenticated
[14385.064087] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[14385.065802] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=6)
[14385.067763] wlp3s0: associated
[14385.070548] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
[14920.062373] PM: Syncing filesystems ... done.
[14920.148325] PM: Preparing system for sleep (mem)
[14920.148630] Freezing user space processes ... (elapsed 0.001 seconds) done.
[14920.149889] OOM killer disabled.
[14920.149889] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[14920.150887] PM: Suspending system (mem)
[14920.150913] Suspending console(s) (use no_console_suspend to debug)
[14920.216655] wlp3s0: deauthenticating from 40:0d:10:64:e4:0f by local choice (Reason: 3=DEAUTH_LEAVING)
[14920.221348] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14920.224787] sd 0:0:0:0: [sda] Stopping disk
[14920.238899] psmouse serio1: Failed to disable mouse on isa0060/serio1
[14920.431230] e1000e: EEE TX LPI TIMER: 00000011
[14920.740446] PM: suspend of devices complete after 589.395 msecs
[14920.757688] PM: late suspend of devices complete after 17.236 msecs
[14920.760508] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14920.760550] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[14920.760654] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14920.800899] PM: noirq suspend of devices complete after 43.207 msecs
[14920.801684] ACPI: Preparing to enter system sleep state S3
[14921.040897] ACPI : EC: event blocked
[14921.040899] ACPI : EC: EC stopped
[14921.040900] PM: Saving platform NVS memory
[14921.040953] Disabling non-boot CPUs ...
[14921.070194] smpboot: CPU 1 is now offline
[14921.099177] smpboot: CPU 2 is now offline
[14921.135733] smpboot: CPU 3 is now offline
[14921.137944] ACPI: Low-level resume complete
[14921.138003] ACPI : EC: EC started
[14921.138003] PM: Restoring platform NVS memory
[14921.138337] Suspended for 38641.656 seconds
[14921.138360] Enabling non-boot CPUs ...
[14921.138393] x86: Booting SMP configuration:
[14921.138394] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14921.216429]  cache: parent cpu1 should not be sleeping
[14921.216544] CPU1 is up
[14921.216560] smpboot: Booting Node 0 Processor 2 APIC 0x2
[14921.296426]  cache: parent cpu2 should not be sleeping
[14921.296551] CPU2 is up
[14921.296566] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14921.376438]  cache: parent cpu3 should not be sleeping
[14921.376672] CPU3 is up
[14921.383049] ACPI: Waking up from system sleep state S3
[14921.676567] thinkpad_acpi: EC reports that Thermal Table has changed
[14921.959740] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14921.959803] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14921.959850] PM: noirq resume of devices complete after 43.410 msecs
[14921.961954] PM: early resume of devices complete after 2.085 msecs
[14921.962046] usb usb2: root hub lost power or was reset
[14921.962048] usb usb3: root hub lost power or was reset
[14921.962066] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[14921.962185] ACPI : EC: event unblocked
[14921.962970] sd 0:0:0:0: [sda] Starting disk
[14921.963263] rtc_cmos 00:02: System wakeup disabled by ACPI
[14921.965120] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14921.965614] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.166668] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.167181] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[14922.189681] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[14922.276728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14922.279319] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14922.279321] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14922.279323] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14922.279374] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14922.279528] ata1.00: supports DRM functions and may not be fully accessible
[14922.284736] ata1.00: NCQ Send/Recv Log not supported
[14922.285027] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[14922.285028] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[14922.285029] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[14922.285052] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[14922.285201] ata1.00: supports DRM functions and may not be fully accessible
[14922.285294] ata1.00: NCQ Send/Recv Log not supported
[14922.285356] ata1.00: configured for UDMA/133
[14922.299699] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[14922.543098] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[14922.616400] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[14922.786443] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[14923.042741] PM: resume of devices complete after 1080.807 msecs
[14923.042844] usb 2-7:1.0: rebind failed: -517
[14923.042848] usb 2-7:1.1: rebind failed: -517
[14923.043167] acpi LNXPOWER:02: Turning OFF
[14923.043461] PM: Finishing wakeup.
[14923.043464] OOM killer enabled.
[14923.043465] Restarting tasks ... done.
[14923.077003] Bluetooth: hci0: read Intel version: 370710018002030d00
[14923.077008] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[14923.222986] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[14926.501171] wlp3s0: authenticate with 40:0d:10:64:e4:09
[14926.507232] wlp3s0: send auth to 40:0d:10:64:e4:09 (try 1/3)
[14926.510672] wlp3s0: authenticated
[14926.513049] wlp3s0: associate with 40:0d:10:64:e4:09 (try 1/3)
[14926.517807] wlp3s0: RX AssocResp from 40:0d:10:64:e4:09 (capab=0x431 status=0 aid=3)
[14926.519162] wlp3s0: associated
[15638.019892] PM: Syncing filesystems ... done.
[15638.059890] PM: Preparing system for sleep (mem)
[15638.060478] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15638.062052] OOM killer disabled.
[15638.062053] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15638.063230] PM: Suspending system (mem)
[15638.063269] Suspending console(s) (use no_console_suspend to debug)
[15638.103373] wlp3s0: deauthenticating from 40:0d:10:64:e4:09 by local choice (Reason: 3=DEAUTH_LEAVING)
[15638.107278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15638.116751] sd 0:0:0:0: [sda] Stopping disk
[15638.125244] psmouse serio1: Failed to disable mouse on isa0060/serio1
[15638.315748] e1000e: EEE TX LPI TIMER: 00000011
[15638.616941] PM: suspend of devices complete after 553.484 msecs
[15638.632104] PM: late suspend of devices complete after 15.160 msecs
[15638.634828] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[15638.634954] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[15638.635010] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[15638.675426] PM: noirq suspend of devices complete after 43.319 msecs
[15638.676140] ACPI: Preparing to enter system sleep state S3
[15638.928725] ACPI : EC: event blocked
[15638.928727] ACPI : EC: EC stopped
[15638.928730] PM: Saving platform NVS memory
[15638.928775] Disabling non-boot CPUs ...
[15638.928813] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20170303/evregion-300)
[15638.928822] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.LPMD] (Node ffff89fd15d1db68), AE_BAD_PARAMETER (20170303/psparse-543)
[15638.928834] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC.CLPM] (Node ffff89fd15d1d280), AE_BAD_PARAMETER (20170303/psparse-543)
[15638.928842] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC.EC._Q4D] (Node ffff89fd15d1de38), AE_BAD_PARAMETER (20170303/psparse-543)
[15638.957998] smpboot: CPU 1 is now offline
[15638.980374] smpboot: CPU 2 is now offline
[15639.006942] smpboot: CPU 3 is now offline
[15639.009111] ACPI: Low-level resume complete
[15639.009169] ACPI : EC: EC started
[15639.009169] PM: Restoring platform NVS memory
[15639.009503] Suspended for 16711.113 seconds
[15639.009526] Enabling non-boot CPUs ...
[15639.009559] x86: Booting SMP configuration:
[15639.009560] smpboot: Booting Node 0 Processor 1 APIC 0x1
[15639.064295]  cache: parent cpu1 should not be sleeping
[15639.064411] CPU1 is up
[15639.064427] smpboot: Booting Node 0 Processor 2 APIC 0x2
[15639.117627]  cache: parent cpu2 should not be sleeping
[15639.117752] CPU2 is up
[15639.117767] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15639.174308]  cache: parent cpu3 should not be sleeping
[15639.174543] CPU3 is up
[15639.180913] ACPI: Waking up from system sleep state S3
[15639.501150] thinkpad_acpi: EC reports that Thermal Table has changed
[15639.830934] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[15639.830995] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[15639.831055] PM: noirq resume of devices complete after 43.409 msecs
[15639.831376] PM: early resume of devices complete after 0.303 msecs
[15639.831445] usb usb2: root hub lost power or was reset
[15639.831447] usb usb3: root hub lost power or was reset
[15639.831951] sd 0:0:0:0: [sda] Starting disk
[15639.832204] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[15639.832449] ACPI : EC: event unblocked
[15639.832880] rtc_cmos 00:02: System wakeup disabled by ACPI
[15639.833418] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[15639.834128] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[15640.035012] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[15640.035532] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[15640.060906] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[15640.144816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15640.147793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[15640.147797] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15640.147800] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15640.147837] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[15640.148018] ata1.00: supports DRM functions and may not be fully accessible
[15640.153130] ata1.00: NCQ Send/Recv Log not supported
[15640.153420] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[15640.153421] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[15640.153422] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15640.153444] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[15640.153595] ata1.00: supports DRM functions and may not be fully accessible
[15640.153718] ata1.00: NCQ Send/Recv Log not supported
[15640.153783] ata1.00: configured for UDMA/133
[15640.167575] usb 2-8: reset high-speed USB device number 4 using xhci_hcd
[15640.484238] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
[15640.524292] usb 2-7: reset full-speed USB device number 3 using xhci_hcd
[15640.767669] usb 2-6: reset full-speed USB device number 2 using xhci_hcd
[15640.901220] PM: resume of devices complete after 1069.864 msecs
[15640.901317] usb 2-7:1.0: rebind failed: -517
[15640.901321] usb 2-7:1.1: rebind failed: -517
[15640.901573] acpi LNXPOWER:02: Turning OFF
[15640.901860] PM: Finishing wakeup.
[15640.901863] OOM killer enabled.
[15640.901864] Restarting tasks ... done.
[15640.926822] Bluetooth: hci0: read Intel version: 370710018002030d00
[15640.926874] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[15641.062959] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[15644.333214] wlp3s0: authenticate with 40:0d:10:64:e4:0f
[15644.338552] wlp3s0: send auth to 40:0d:10:64:e4:0f (try 1/3)
[15644.340457] wlp3s0: authenticated
[15644.340795] wlp3s0: associate with 40:0d:10:64:e4:0f (try 1/3)
[15644.342470] wlp3s0: RX AssocResp from 40:0d:10:64:e4:0f (capab=0x411 status=0 aid=2)
[15644.344398] wlp3s0: associated
[15644.347932] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 40:0d:10:64:e4:0f
speaker-test -Dhw:0 -c2
speaker-test 1.1.4

Playback device is hw:0
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
 0 - Front Left
 1 - Front Right
Time per period = 10.933483
 0 - Front Left
 1 - Front Right
Time per period = 10.934623
 0 - Front Left
 1 - Front Right

Unmuting had no effect

Offline

#9 2017-10-04 14:12:25

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

Did that speaker-test give you any output? You should hear some noise. If it didn't, we are really starting to strawgrasp here. Although one other thing I notice only now, You have a lot of vid pid ignored messages. Do you have anything in /etc/modprobe.d? Can you post the contents? Or rather, remove/move the file setting snd_hda definitons away from the modprobe.d folder, reboot and try again. It's possible you are passing some bogus values. Is there an  ~/.asoundrc?

If neither of these two help, you might have to try and hdajackretask your pins into working order, but that's usually a last stop gap measure.

Offline

#10 2017-10-07 14:05:38

mr_miyagi420
Member
Registered: 2017-09-25
Posts: 5

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

/etc/modprobe.d contains alsa-base.conf which contains:

options snd-hda-intel index=1

I moved it away and rebooted but that had no effect. I tried speaker-test again but the output was the same and there was no audio output. There is an ~/,asoundrc and its contents are:

pcm.!default {
        type hw
        card PCH
}

ctl.!default {
      type hw
      card PCH
}

Last edited by mr_miyagi420 (2017-10-07 14:18:04)

Offline

#11 2017-10-11 07:20:36

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Lenovo Thinkpad T440s Sound not working [Speakers]

That will definitely have a chance to cause you issues, remove it.

But it won't fix the underlying problem...Try the following

systemctl --user mask pulseaudio.socket
systemctl --user stop pulseaudio
sudo fuser -v /dev/snd/* #This should not give you any output, if it does, kill offending processes
speaker-test -Ddefault -c2 #Replace default, with all possible PCMs listed in aplay -L and see if any of them give you any output

If none of these give you any output, switch to the LTS kernel and repeat. If that still doesn't help, look if you can get a pin to work by playing around with the options in hdajackretask.

Last edited by V1del (2017-10-11 07:54:42)

Offline

Board footer

Powered by FluxBB