Arch Linux

ratedrzihad

Member

Registered: 2017-10-10

Posts: 8

High temperature issue

My laptop is getting hot after booting. Then i checked cpu frequency speed. I found that my cpu is running constantly in max performance.
I have tried tlp. Didn't work. Then i tried to scale cpu frequency. But because of intel_pstate i only have "High Performance" and "Powersave" Governor. Switching power save mode didn't work. I have installed bumblebee, bbswitch. Nvidia gpu isn't running for sure. Then i put live ubuntu to see cpu speed. You can see that its in low speed. How can i fix the cpu speed and temperature issue in Arch?

Alber

Member

From: Spain - España

Registered: 2011-11-11

Posts: 227

Re: High temperature issue

Maybe command line top could say if a app (and what app) is using the CPU.

---

Because not all of us are native English speakers, try no to use slang or abbreviations, thank you.

ratedrzihad

Member

Registered: 2017-10-10

Posts: 8

Re: High temperature issue

Here's what my top command says. I think my cpu is running in full performance. Can't find anyway to keep the frequency low.

$ top

top - 15:10:33 up 52 min,  1 user,  load average: 0.36, 0.46, 0.42
Tasks: 149 total,   1 running, 148 sleeping,   0 stopped,   0 zombie
%Cpu0  :   1.3/0.0     1[|                                                    ]
%Cpu1  :   0.7/0.7     1[                                                     ]
%Cpu2  :   1.3/1.3     3[||                                                   ]
%Cpu3  :   1.3/0.7     2[|                                                    ]
GiB Mem : 16.9/7.750    [                                                     ]
GiB Swap:  0.0/8.000    [                                                     ]

  PID USER      PR  NI    VIRT    RES  %CPU %MEM     TIME+ S COMMAND            
    1 root      20   0  217.1m   7.9m   0.0  0.1   0:00.70 S systemd            
  168 root      20   0   88.8m   7.0m   0.0  0.1   0:00.24 S  `- systemd-journ+ 
  185 root      20   0   85.9m   8.4m   0.0  0.1   0:00.66 S  `- systemd-udevd  
  537 root      20   0   33.6m   3.2m   0.0  0.0   0:00.03 S  `- bumblebeed     
  540 root      20   0   31.4m   4.3m   0.0  0.1   0:00.01 S  `- bluetoothd     
  541 root      20   0   68.7m   5.7m   0.0  0.1   0:00.04 S  `- systemd-logind 
  542 dbus      20   0   38.5m   4.2m   0.0  0.1   0:01.09 S  `- dbus-daemon    
  543 root      20   0  475.1m  17.7m   0.0  0.2   0:01.23 S  `- NetworkManager 
  559 root      20   0  271.0m   8.4m   0.0  0.1   0:00.01 S  `- lightdm        
  681 root      20   0  326.1m  71.2m   2.0  0.9   1:18.95 S      `- Xorg       
  779 root      20   0  245.2m   7.0m   0.0  0.1   0:00.02 S      `- lightdm    
  806 xelcor    20   0   13.8m   3.2m   0.0  0.0   0:00.01 S          `- sh     
  821 xelcor    20   0  335.7m  17.3m   0.0  0.2   0:00.56 S              `- x+ 
  830 xelcor    20   0  196.5m  21.6m   0.0  0.3   0:01.23 S                  + 

seth

Member

From: Don't DM me only for attention

Registered: 2012-09-03

Posts: 74,325

Re: High temperature issue

wild shot: "intel_iommu=off", also ensure to install and enable microcode updates.

Otherwise please provide a complete dmesg output.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

ratedrzihad

Member

Registered: 2017-10-10

Posts: 8

Re: High temperature issue

I have already installed microcode. Here is my dmesg:

       [    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 0220000000 mask 7FF0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   5 base 00CC000000 mask 7FFC000000 uncachable
[    0.000000]   6 base 00CBC00000 mask 7FFFC00000 uncachable
[    0.000000]   7 base 022F800000 mask 7FFF800000 uncachable
[    0.000000]   8 base 022F400000 mask 7FFFC00000 uncachable
[    0.000000]   9 base 022F200000 mask 7FFFE00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8984c00fd840]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8984c0096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x3cd5e000, 0x3cd5efff] PGTABLE
[    0.000000] BRK [0x3cd5f000, 0x3cd5ffff] PGTABLE
[    0.000000] BRK [0x3cd60000, 0x3cd60fff] PGTABLE
[    0.000000] BRK [0x3cd61000, 0x3cd61fff] PGTABLE
[    0.000000] BRK [0x3cd62000, 0x3cd62fff] PGTABLE
[    0.000000] BRK [0x3cd63000, 0x3cd63fff] PGTABLE
[    0.000000] BRK [0x3cd64000, 0x3cd64fff] PGTABLE
[    0.000000] BRK [0x3cd65000, 0x3cd65fff] PGTABLE
[    0.000000] BRK [0x3cd66000, 0x3cd66fff] PGTABLE
[    0.000000] BRK [0x3cd67000, 0x3cd67fff] PGTABLE
[    0.000000] BRK [0x3cd68000, 0x3cd68fff] PGTABLE
[    0.000000] BRK [0x3cd69000, 0x3cd69fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37053000-0x37820fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C9E9C000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000C9E9C088 000094 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C9EAFE58 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C9E9C240 013C11 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000CAB15F80 000040
[    0.000000] ACPI: APIC 0x00000000C9EAFF68 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000C9EAFFE0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000C9EB0028 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C9EB00F0 00019D (v01 Intel  zpodd    00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9EB0290 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9EB07D0 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000C9EB12A8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C9EB12E8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C9EB1320 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000C9EB15B8 0044FA (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C9EB5AB8 0017DA (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: DMAR 0x00000000C9EB7298 0000A8 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 0x00000000C9EB7340 001402 (v01 OptRef OptTabl  00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f1fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22f1f9000-0x22f1fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022f1fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b9956fff]
[    0.000000]   node   0: [mem 0x00000000b995e000-0x00000000ba1dafff]
[    0.000000]   node   0: [mem 0x00000000ba46f000-0x00000000c98e0fff]
[    0.000000]   node   0: [mem 0x00000000c9af4000-0x00000000c9e17fff]
[    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022f1fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f1fffff]
[    0.000000] On node 0 totalpages: 2067208
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12838 pages used for memmap
[    0.000000]   DMA32 zone: 821611 pages, LIFO batch:31
[    0.000000]   Normal zone: 19400 pages used for memmap
[    0.000000]   Normal zone: 1241600 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000cbe00000-0x00000000cfdfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9957000-0xb995dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xba1db000-0xba46efff]
[    0.000000] PM: Registered nosave memory: [mem 0xc98e1000-0xc9af3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9e18000-0xcab16fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcab17000-0xcaf59fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf5a000-0xcaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8986eee00000 s106520 r8192 d32744 u524288
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2034880
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e70bd988-847e-4ebc-8753-60cdf67ba549 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7852040K/8268832K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 416792K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 28111 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] spurious 8259A interrupt: IRQ7.
[    0.003333] tsc: Detected 2793.700 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.20 BogoMIPS (lpj=9312333)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.017412] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.017910] Security Framework initialized
[    0.017911] Yama: becoming mindful.
[    0.018997] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.019556] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019581] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.019599] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.019741] CPU: Physical Processor ID: 0
[    0.019741] CPU: Processor Core ID: 0
[    0.019744] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.019745] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.019748] mce: CPU supports 7 MCE banks
[    0.019754] CPU0: Thermal monitoring enabled (TM1)
[    0.019763] process: using mwait in idle threads
[    0.019764] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.019765] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.019837] Freeing SMP alternatives memory: 24K
[    0.024438] smpboot: Max logical packages: 2
[    0.024443] DMAR: Host address width 39
[    0.024444] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.024450] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.024451] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.024454] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.024454] DMAR: RMRR base: 0x000000c9a7a000 end: 0x000000c9a86fff
[    0.024455] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[    0.024457] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.024457] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.024458] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.024694] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.024695] x2apic enabled
[    0.024699] Switched APIC routing to cluster x2apic.
[    0.025107] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058124] TSC deadline timer enabled
[    0.058126] smpboot: CPU0: Intel(R) Core(TM) i5-4200H CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.070017] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.070042] ... version:                3
[    0.070043] ... bit width:              48
[    0.070043] ... generic registers:      4
[    0.070043] ... value mask:             0000ffffffffffff
[    0.070044] ... max period:             00007fffffffffff
[    0.070044] ... fixed-purpose events:   3
[    0.070045] ... event mask:             000000070000000f
[    0.076681] Hierarchical SRCU implementation.
[    0.090065] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.096680] smp: Bringing up secondary CPUs ...
[    0.123353] x86: Booting SMP configuration:
[    0.123354] .... node  #0, CPUs:      #1 #2 #3
[    0.426681] smp: Brought up 1 node, 4 CPUs
[    0.426681] smpboot: Total of 4 processors activated (22362.15 BogoMIPS)
[    0.429248] devtmpfs: initialized
[    0.429248] x86/mm: Memory block size: 128MB
[    0.429248] PM: Registering ACPI NVS region [mem 0xb9957000-0xb995dfff] (28672 bytes)
[    0.429248] PM: Registering ACPI NVS region [mem 0xc9e18000-0xcab16fff] (13627392 bytes)
[    0.429248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.429248] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.429248] pinctrl core: initialized pinctrl subsystem
[    0.430002] RTC time: 10:23:19, date: 10/12/17
[    0.430002] NET: Registered protocol family 16
[    0.430005] cpuidle: using governor ladder
[    0.430015] cpuidle: using governor menu
[    0.430015] PCCT header not found.
[    0.430039] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.430040] ACPI: bus type PCI registered
[    0.430042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.430093] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.430094] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.430099] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.430153] PCI: Using configuration type 1 for base access
[    0.430167] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.430532] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.430532] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.430532] ACPI: Added _OSI(Module Device)
[    0.430532] ACPI: Added _OSI(Processor Device)
[    0.430532] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.430532] ACPI: Added _OSI(Processor Aggregator Device)
[    0.430532] ACPI: EC: EC started
[    0.430532] ACPI: EC: interrupt blocked
[    0.431064] ACPI: \: Used as first EC
[    0.431066] ACPI: \: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.431066] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.431200] ACPI: Executed 2 blocks of module-level executable AML code
[    0.435776] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.439645] ACPI: Dynamic OEM Table Load:
[    0.439645] ACPI: SSDT 0xFFFF8986E5391400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.439645] ACPI: Dynamic OEM Table Load:
[    0.439645] ACPI: SSDT 0xFFFF8986E522C000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.440075] ACPI: Dynamic OEM Table Load:
[    0.440078] ACPI: SSDT 0xFFFF8986E4C95000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.440554] ACPI: Interpreter enabled
[    0.440582] ACPI: (supports S0 S3 S4 S5)
[    0.440583] ACPI: Using IOAPIC for interrupt routing
[    0.440602] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.445473] ACPI: Power Resource [PG00] (on)
[    0.449175] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.449178] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.449547] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.449548] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.449820] PCI host bridge to bus 0000:00
[    0.449822] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.449823] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.449823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.449824] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.449825] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.449825] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.449826] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.449827] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[    0.449828] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.449833] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.449894] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.449920] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.449995] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.450003] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.450007] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.450009] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.450063] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.450070] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[    0.450147] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.450166] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.450216] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.450264] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.450281] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c00f 64bit]
[    0.450334] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.450388] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.450405] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[    0.450463] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.450514] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.450572] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.450587] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.450589] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.450657] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.450715] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.450728] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.450730] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.450794] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.450852] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.450865] pci 0000:00:1c.3: Enabling MPC IRBNCE
[    0.450867] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[    0.450936] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.451072] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.451085] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.451091] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.451097] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.451103] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.451109] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.451115] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[    0.451144] pci 0000:00:1f.2: PME# supported from D3hot
[    0.451188] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.451204] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[    0.451220] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.451307] pci 0000:01:00.0: [10de:1391] type 00 class 0x030200
[    0.451318] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.451324] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.451330] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.451334] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.451338] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.460011] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.460013] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.460014] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.460016] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.460066] acpiphp: Slot [1] registered
[    0.460071] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.460139] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[    0.460172] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[    0.460221] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[    0.460289] pci 0000:03:00.0: supports D1 D2
[    0.460290] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.470015] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.470020] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.470088] pci 0000:04:00.0: [10ec:5287] type 00 class 0xff0000
[    0.470118] pci 0000:04:00.0: reg 0x10: [mem 0xf7815000-0xf7815fff]
[    0.470178] pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]
[    0.470261] pci 0000:04:00.0: supports D1 D2
[    0.470262] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.470343] pci 0000:04:00.1: [10ec:8168] type 00 class 0x020000
[    0.470372] pci 0000:04:00.1: reg 0x10: [io  0xd000-0xd0ff]
[    0.470398] pci 0000:04:00.1: reg 0x18: [mem 0xf7814000-0xf7814fff 64bit]
[    0.470415] pci 0000:04:00.1: reg 0x20: [mem 0xf7810000-0xf7813fff 64bit]
[    0.470502] pci 0000:04:00.1: supports D1 D2
[    0.470503] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.480027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.480030] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.480033] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.480703] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.480740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.480775] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    0.480810] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[    0.480845] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.480880] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.480923] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.480955] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.481161] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.481197] ACPI: EC: EC stopped
[    0.481197] ACPI: EC: EC started
[    0.481198] ACPI: EC: interrupt blocked
[    0.481323] ACPI: EC: interrupt unblocked
[    0.481328] ACPI: EC: event unblocked
[    0.481334] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.481335] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot ECDT EC to handle transactions and events
[    0.481355] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.481356] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.481401] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.481401] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.481401] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.481401] vgaarb: loaded
[    0.481401] EDAC MC: Ver: 3.0.0
[    0.481401] Registered efivars operations
[    0.481794] PCI: Using ACPI for IRQ routing
[    0.484556] PCI: pci_cache_line_size set to 64 bytes
[    0.484597] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.484598] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.484599] e820: reserve RAM buffer [mem 0xb9957000-0xbbffffff]
[    0.484599] e820: reserve RAM buffer [mem 0xba1db000-0xbbffffff]
[    0.484600] e820: reserve RAM buffer [mem 0xc98e1000-0xcbffffff]
[    0.484601] e820: reserve RAM buffer [mem 0xc9e18000-0xcbffffff]
[    0.484602] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.484602] e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff]
[    0.484654] NetLabel: Initializing
[    0.484655] NetLabel:  domain hash size = 128
[    0.484655] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.484665] NetLabel:  unlabeled traffic allowed by default
[    0.484673] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.484673] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.486680] clocksource: Switched to clocksource hpet
[    0.492551] VFS: Disk quotas dquot_6.6.0
[    0.492566] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.492624] pnp: PnP ACPI init
[    0.492716] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.492719] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.492904] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.492906] system 00:01: [io  0xffff] has been reserved
[    0.492906] system 00:01: [io  0xffff] has been reserved
[    0.492907] system 00:01: [io  0xffff] has been reserved
[    0.492908] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.492909] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.492910] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.492910] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.492911] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.492912] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.492914] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.492930] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.492964] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.492965] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.493000] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.493001] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.493021] system 00:05: [io  0x0240-0x0259] has been reserved
[    0.493022] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.493058] pnp 00:06: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.493081] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.493343] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.493344] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.493345] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.493346] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.493346] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.493347] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.493348] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.493349] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.493350] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.493351] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.493352] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.493353] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.493354] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.493405] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.493608] pnp: PnP ACPI: found 10 devices
[    0.499355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.499381] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.499382] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.499384] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.499386] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.499388] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.499397] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.499400] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.499406] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.499408] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.499412] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.499418] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.499419] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.499420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.499421] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.499422] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.499422] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.499423] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.499424] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff window]
[    0.499424] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.499425] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.499426] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.499427] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.499428] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.499428] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.499520] NET: Registered protocol family 2
[    0.499635] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.499708] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.499815] TCP: Hash tables configured (established 65536 bind 65536)
[    0.499836] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.499854] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.499894] NET: Registered protocol family 1
[    0.499904] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.500085] PCI: CLS 64 bytes, default 64
[    0.500107] Unpacking initramfs...
[    0.572021] Freeing initrd memory: 7992K
[    0.572046] DMAR: No ATSR found
[    0.572284] DMAR: dmar0: Using Queued invalidation
[    0.572289] DMAR: dmar1: Using Queued invalidation
[    0.572332] DMAR: Setting RMRR:
[    0.572355] DMAR: Setting identity map for device 0000:00:02.0 [0xcbc00000 - 0xcfdfffff]
[    0.572685] DMAR: Setting identity map for device 0000:00:14.0 [0xc9a7a000 - 0xc9a86fff]
[    0.572697] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.572712] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    0.572828] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.572864] iommu: Adding device 0000:00:00.0 to group 0
[    0.572873] iommu: Adding device 0000:00:01.0 to group 1
[    0.572878] iommu: Adding device 0000:00:02.0 to group 2
[    0.572883] iommu: Adding device 0000:00:03.0 to group 3
[    0.572889] iommu: Adding device 0000:00:14.0 to group 4
[    0.572896] iommu: Adding device 0000:00:16.0 to group 5
[    0.572901] iommu: Adding device 0000:00:1b.0 to group 6
[    0.572906] iommu: Adding device 0000:00:1c.0 to group 7
[    0.572911] iommu: Adding device 0000:00:1c.2 to group 8
[    0.572917] iommu: Adding device 0000:00:1c.3 to group 9
[    0.572926] iommu: Adding device 0000:00:1f.0 to group 10
[    0.572931] iommu: Adding device 0000:00:1f.2 to group 10
[    0.572935] iommu: Adding device 0000:00:1f.3 to group 10
[    0.572938] iommu: Adding device 0000:01:00.0 to group 1
[    0.572944] iommu: Adding device 0000:03:00.0 to group 11
[    0.572964] iommu: Adding device 0000:04:00.0 to group 12
[    0.572981] iommu: Adding device 0000:04:00.1 to group 12
[    0.574098] Scanning for low memory corruption every 60 seconds
[    0.574447] Initialise system trusted keyrings
[    0.574455] Key type blacklist registered
[    0.574499] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.575147] zbud: loaded
[    0.575571] Key type asymmetric registered
[    0.575589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.575615] io scheduler noop registered
[    0.575616] io scheduler deadline registered
[    0.575630] io scheduler cfq registered (default)
[    0.575631] io scheduler mq-deadline registered
[    0.575632] io scheduler kyber registered
[    0.575644] io scheduler bfq registered
[    0.576170] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[    0.576182] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[    0.576195] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[    0.576207] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
[    0.576223] efifb: probing for efifb
[    0.576235] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    0.576236] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.576236] efifb: scrolling: redraw
[    0.576237] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.577396] Console: switching to colour frame buffer device 128x48
[    0.578475] fb0: EFI VGA frame buffer device
[    0.578480] intel_idle: MWAIT substates: 0x42120
[    0.578480] intel_idle: v0.4.1 model 0x3C
[    0.578579] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.578661] GHES: HEST is not enabled!
[    0.578715] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.579054] Linux agpgart interface v0.103
[    0.579242] rtc_cmos 00:02: RTC can wake from S4
[    0.579345] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.579372] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.579379] intel_pstate: Intel P-state driver initializing
[    0.579520] ledtrig-cpu: registered to indicate activity on CPUs
[    0.579579] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.580098] NET: Registered protocol family 10
[    0.587640] Segment Routing with IPv6
[    0.587689] NET: Registered protocol family 17
[    0.588228] RAS: Correctable Errors collector initialized.
[    0.588286] microcode: sig=0x306c3, pf=0x20, revision=0x22
[    0.588458] microcode: Microcode Update Driver: v2.2.
[    0.588481] sched_clock: Marking stable (588447732, 0)->(585714092, 2733640)
[    0.589004] registered taskstats version 1
[    0.589016] Loading compiled-in X.509 certificates
[    0.589048] zswap: loaded using pool lzo/zbud
[    0.590121]   Magic number: 5:807:375
[    0.590151] acpi LNXVIDEO:01: hash matches
[    0.590220] rtc_cmos 00:02: setting system clock to 2017-10-12 10:23:19 UTC (1507803799)
[    0.590769] PM: Hibernation image not present or could not be loaded.
[    0.591836] Freeing unused kernel memory: 1328K
[    0.591837] Write protecting the kernel read-only data: 10240k
[    0.592164] Freeing unused kernel memory: 1576K
[    0.592204] Freeing unused kernel memory: 12K
[    0.636210] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.640597] i8042: Detected active multiplexing controller, rev 1.1
[    0.644994] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.645034] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.645057] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.645079] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.645101] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.646019] ACPI: bus type USB registered
[    0.646023] SCSI subsystem initialized
[    0.646033] usbcore: registered new interface driver usbfs
[    0.646040] usbcore: registered new interface driver hub
[    0.646095] usbcore: registered new device driver usb
[    0.647269] libata version 3.00 loaded.
[    0.647471] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.647476] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.648594] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.648600] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.648773] hub 1-0:1.0: USB hub found
[    0.648788] hub 1-0:1.0: 14 ports detected
[    0.651557] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.651560] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.651671] hub 2-0:1.0: USB hub found
[    0.651683] hub 2-0:1.0: 4 ports detected
[    0.652243] ahci 0000:00:1f.2: version 3.0
[    0.652389] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.652391] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst 
[    0.660400] scsi host0: ahci
[    0.660481] scsi host1: ahci
[    0.660546] scsi host2: ahci
[    0.660629] scsi host3: ahci
[    0.660705] scsi host4: ahci
[    0.660745] ata1: DUMMY
[    0.660746] ata2: DUMMY
[    0.660749] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 32
[    0.660750] ata4: DUMMY
[    0.660752] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 32
[    0.698963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.970053] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[    0.974319] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.974348] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.976073] ata3.00: ATAPI: MATSHITADVD-RAM UJ8G6, 1.00, max UDMA/133
[    0.977614] ata3.00: configured for UDMA/133
[    0.981027] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.981031] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.981034] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.981595] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8G6    1.00 PQ: 0 ANSI: 5
[    0.987222] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[    0.987225] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.994045] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.994049] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.994051] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.000205] ata5.00: configured for UDMA/133
[    1.000581] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    1.048612] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.048618] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.048649] sd 4:0:0:0: [sda] Write Protect is off
[    1.048653] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.048717] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.065848] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.065850] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.066026] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.105159] hidraw: raw HID events driver (C) Jiri Kosina
[    1.106980]  sda: sda1 sda2 sda3
[    1.107327] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.107375] usbcore: registered new interface driver usbhid
[    1.107376] usbhid: USB HID core driver
[    1.108185] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0001/input/input5
[    1.108220] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
[    1.220025] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    1.466715] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.590205] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.599980] tsc: Refined TSC clocksource calibration: 2793.531 MHz
[    1.599987] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284461bc4f9, max_idle_ns: 440795228872 ns
[    2.613399] clocksource: Switched to clocksource tsc
[    2.685204] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.714009] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    2.714180] systemd[1]: Detected architecture x86-64.
[    2.731220] systemd[1]: Set hostname to <Dragon_Pit>.
[    3.120985] random: crng init done
[    3.998395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.069080] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.069110] systemd[1]: Listening on Journal Socket.
[    4.069202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.070078] systemd[1]: Listening on Process Core Dump Socket.
[    4.070098] systemd[1]: Listening on udev Kernel Socket.
[    4.070138] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.298378] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    4.409541] systemd-journald[172]: Received request to flush runtime journal from PID 1
[    6.349515] ACPI: Battery Slot [BAT0] (battery present)
[    6.349589] ACPI: AC Adapter [AC0] (on-line)
[    6.533383] EDAC ie31200: No ECC support
[    6.533543] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20170531/utaddress-247)
[    6.533548] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
[    6.533553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.533556] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170531/utaddress-247)
[    6.533559] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170531/utaddress-247)
[    6.533563] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[    6.533566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.533567] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170531/utaddress-247)
[    6.533570] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170531/utaddress-247)
[    6.533573] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[    6.533576] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[    6.533579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.533580] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20170531/utaddress-247)
[    6.533583] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20170531/utaddress-247)
[    6.533586] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[    6.533590] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[    6.533593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.533593] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.534782] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    6.535434] ACPI: Lid Switch [LID]
[    6.535459] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[    6.535473] ACPI: Sleep Button [SLPB]
[    6.535496] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    6.535506] ACPI: Power Button [PWRF]
[    6.610897] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    6.610927] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    6.693485] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input9
[    6.750459] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.766159] [drm] Memory usable by graphics device = 2048M
[    6.766160] [drm] VT-d active for gfx access
[    6.766162] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    6.766162] fb: switching to inteldrmfb from EFI VGA
[    6.766177] Console: switching to colour dummy device 80x25
[    6.766236] [drm] Replacing VGA console driver
[    6.766422] [drm] DMAR active, disabling use of stolen memory
[    6.771999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.772000] [drm] Driver supports precise vblank timestamp query.
[    6.773651] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.797798] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    6.797906] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    6.799194] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    6.802257] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:5f/LNXVIDEO:00/input/input10
[    6.803450] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.806824] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    6.815915] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    6.816222] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    6.816223] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.816224] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    6.816225] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    6.816225] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    6.816226] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    6.816227] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    6.816976] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    6.819486] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    6.819597] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    6.819621] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    6.823621] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.823709] thermal LNXTHERM:00: registered as thermal_zone0
[    6.823710] ACPI: Thermal Zone [THRM] (57 C)
[    6.830766] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.830767] fbcon: inteldrmfb (fb0) is primary device
[    6.983194] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    7.045853] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    7.045854] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.045854] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.045855] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.045855] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.103648] AVX2 version of gcm_enc/dec engaged.
[    7.103649] AES CTR mode by8 optimization enabled
[    7.109108] ath: phy0: WB335 2-ANT card detected
[    7.109108] ath: phy0: Set BT/WLAN RX diversity capability
[    7.116225] ath: phy0: Enable LNA combining
[    7.117387] ath: EEPROM regdomain: 0x60
[    7.117387] ath: EEPROM indicates we should expect a direct regpair map
[    7.117388] ath: Country alpha2 being used: 00
[    7.117389] ath: Regpair used: 0x60
[    7.168750] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    7.168774] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    7.168797] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    7.168820] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    7.183600] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.183606] r8169 0000:04:00.1: can't disable ASPM; OS doesn't have ASPM control
[    7.194201] r8169 0000:04:00.1 eth0: RTL8411 at 0xffffadd200dd9000, f0:79:59:2f:5b:4f, XID 1c800800 IRQ 37
[    7.194203] r8169 0000:04:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    7.267114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.267450] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffadd201900000, irq=18
[    7.446622] input: FocalTechPS/2 FocalTech Touchpad as /devices/platform/i8042/serio4/input/input23
[    7.756694] iTCO_vendor_support: vendor-support=0
[    7.757100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.757135] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    7.757205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.770631] asus_wmi: ASUS WMI generic driver loaded
[    7.899522] Console: switching to colour frame buffer device 170x48
[    7.917950] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.001284] asus_wmi: Initialization: 0x1
[    8.001345] asus_wmi: BIOS WMI version: 7.9
[    8.001416] asus_wmi: SFUN value: 0x4a0877
[    8.002531] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input24
[    8.004421] asus_wmi: Number of fans: 1
[    8.025402] r8169 0000:04:00.1 enp4s0f1: renamed from eth0
[    8.195191] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    8.307348] mousedev: PS/2 mouse device common for all mice
[    8.533552] intel_rapl: Found RAPL domain package
[    8.533554] intel_rapl: Found RAPL domain core
[    8.533555] intel_rapl: Found RAPL domain uncore
[    8.533556] intel_rapl: Found RAPL domain dram
[    8.533558] intel_rapl: RAPL package 0 domain package locked by BIOS
[    8.533562] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    8.903404] Adding 8388604k swap on /dev/sda2.  Priority:-1 extents:1 across:8388604k FS
[   11.690428] media: Linux media interface: v0.10
[   11.722626] Linux video capture interface: v2.00
[   12.060613] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[   12.066800] uvcvideo 1-7:1.0: Entity type for entity Extension 7 was not initialized!
[   12.066803] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[   12.066804] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[   12.066806] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[   12.066895] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25
[   12.066960] usbcore: registered new interface driver uvcvideo
[   12.066961] USB Video Class driver (1.1.1)
[   12.210740] Bluetooth: Core ver 2.22
[   12.210753] NET: Registered protocol family 31
[   12.210754] Bluetooth: HCI device and connection manager initialized
[   12.210756] Bluetooth: HCI socket layer initialized
[   12.210758] Bluetooth: L2CAP socket layer initialized
[   12.210761] Bluetooth: SCO socket layer initialized
[   12.513579] usbcore: registered new interface driver btusb
[   12.579034] usb 1-5: USB disconnect, device number 3
[   12.579165] usbcore: registered new interface driver ath3k
[   12.856661] usb 1-5: new full-speed USB device number 5 using xhci_hcd
[   14.134832] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
[   14.178854] r8169 0000:04:00.1 enp4s0f1: link down
[   14.178921] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
[   14.220477] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   14.232634] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   14.252366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   14.904794] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   15.708218] bbswitch: loading out-of-tree module taints kernel.
[   15.708769] bbswitch: version 0.8
[   15.708780] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   15.708790] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   15.708816] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   15.709020] bbswitch: detected an Optimus _DSM function
[   15.709166] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   15.713382] bbswitch: disabling discrete graphics
[   15.713415] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[   15.831920] nvidia: module license 'NVIDIA' taints kernel.
[   15.831921] Disabling lock debugging due to kernel taint
[   15.839397] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[   16.420030] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[   16.420254] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  387.12  Thu Sep 28 20:18:48 PDT 2017 (using threaded interrupts)
[   18.086665] usb 1-5: device descriptor read/64, error -110
[   19.945631] fuse init (API version 7.26)
[   24.192995] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.192997] Bluetooth: BNEP filters: protocol multicast
[   24.193000] Bluetooth: BNEP socket layer initialized
[   31.165434] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   32.294735] wlp3s0: authenticate with 40:a5:ef:87:d9:71
[   32.311512] wlp3s0: send auth to 40:a5:ef:87:d9:71 (try 1/3)
[   32.318968] wlp3s0: authenticated
[   32.319952] wlp3s0: associate with 40:a5:ef:87:d9:71 (try 1/3)
[   32.423632] wlp3s0: RX AssocResp from 40:a5:ef:87:d9:71 (capab=0x421 status=0 aid=12)
[   32.423784] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   32.423861] wlp3s0: associated
[   45.109176] Bluetooth: RFCOMM TTY layer initialized
[   45.109182] Bluetooth: RFCOMM socket layer initialized
[   45.109188] Bluetooth: RFCOMM ver 1.11
[  138.594565] wlp3s0: authenticate with 40:a5:ef:87:d9:71
[  138.611526] wlp3s0: send auth to 40:a5:ef:87:d9:71 (try 1/3)
[  138.692038] wlp3s0: send auth to 40:a5:ef:87:d9:71 (try 2/3)
[  138.879992] wlp3s0: send auth to 40:a5:ef:87:d9:71 (try 3/3)
[  139.029954] wlp3s0: authentication with 40:a5:ef:87:d9:71 timed out
[  140.667813] wlp3s0: authenticate with 40:a5:ef:87:d9:71
[  140.684758] wlp3s0: send auth to 40:a5:ef:87:d9:71 (try 1/3)
[  140.700557] wlp3s0: authenticated
[  140.703318] wlp3s0: associate with 40:a5:ef:87:d9:71 (try 1/3)
[  140.719677] wlp3s0: RX AssocResp from 40:a5:ef:87:d9:71 (capab=0x421 status=0 aid=12)
[  140.719773] wlp3s0: associated
[  329.870615] device-mapper: uevent: version 1.0.3
[  329.870667] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[  333.228630] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  333.276158] JFS: nTxBlock = 8192, nTxLock = 65536
[  333.345438] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[  333.423249] raid6: sse2x1   gen() 11766 MB/s
[  333.479898] raid6: sse2x1   xor()  7890 MB/s
[  333.536559] raid6: sse2x2   gen() 14158 MB/s
[  333.593222] raid6: sse2x2   xor()  9193 MB/s
[  333.649889] raid6: sse2x4   gen() 16701 MB/s
[  333.706560] raid6: sse2x4   xor() 10469 MB/s
[  333.763237] raid6: avx2x1   gen() 23233 MB/s
[  333.819889] raid6: avx2x1   xor() 15962 MB/s
[  333.876557] raid6: avx2x2   gen() 27087 MB/s
[  333.933235] raid6: avx2x2   xor() 16460 MB/s
[  333.989906] raid6: avx2x4   gen() 29966 MB/s
[  334.046557] raid6: avx2x4   xor() 19392 MB/s
[  334.046558] raid6: using algorithm avx2x4 gen() 29966 MB/s
[  334.046558] raid6: .... xor() 19392 MB/s, rmw enabled
[  334.046559] raid6: using avx2x2 recovery algorithm
[  334.058844] xor: automatically using best checksumming function   avx       
[  334.093356] Btrfs loaded, crc32c=crc32c-intel
    

Last edited by ratedrzihad (2017-10-12 10:41:37)

ratedrzihad

Member

Registered: 2017-10-10

Posts: 8

Re: High temperature issue

Here's my temp of my laptop. Super Hot.

 sensors
asus-isa-0000
Adapter: ISA adapter
cpu_fan:     2700 RPM
temp1:        +55.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +58.0°C  (high = +84.0°C, crit = +100.0°C)
Core 0:        +58.0°C  (high = +84.0°C, crit = +100.0°C)
Core 1:        +53.0°C  (high = +84.0°C, crit = +100.0°C)

acpitz-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  (crit = +103.0°C)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,104

Re: High temperature issue

This isn't a complete log, important bits from the start are missing. However what we can infer from what is there is that IOMMU currently is enabled, so try the suggested parameter or update the kernel to 4.13.5 in which case the default is off again anyway.

Also, looking at /proc/cpuinfo will not give you accurate readings, it doesn't contain the current cpu frequency anymore as of the 4.13 kernel series. I assume cpupower/turbostat have been updated, so use that to get readings on what your actual frequencies are.

Also 58 isn't *that* hot, laptops do tend to get hotter than their desktop counterparts. Are you actually sure with before after comparisons (try the LTS kernel for example) on average tempreadings that you aren't imagining this and are simply placeboing all over the place because you saw these frequency values (which again, are not synchronized to /proc/cpuinfo anymore, it will simply show raw "cpu description info" and not actual runtime information)

Another thing I'm seeing now: Make sure you set up Microcode updates. You say you have them installed, yet there's no indication that they have been set up correctly in that dmesg. Read that article again and refer to the section for your bootloader.

Last edited by V1del (2017-10-12 13:29:34)

mrunion

Member

From: Jonesborough, TN

Registered: 2007-01-26

Posts: 1,938

Website

Re: High temperature issue

To echo V1del's sentiment, I got a brand new System 76 Oryx Pro with the i7-7700HQ processor and nVidia 1070GTX -- The fan would come on, go off, come on, etc. I was seeing temps between 50C-60C during normal work. I asked System76 support about the heat issue and they said it was completely normal. I idle at around 40C. They indicated the sme as V1del that these things run hotter.

I don't know what Ubuntu and Arch are different, though.

---

Matt

"It is very difficult to educate the educated."