You are not logged in.
I have installed Archlinux on my Laptop DELL Inspiron 15 7000 Gaming and on windows, there is no problem with the SSD PCIe but on linux the temperature is very high
PS: I think that the PCIi SSD is not yet NVME
Is there solution to make the temperature lower?
Last edited by bOlaE (2017-10-22 11:01:45)
Offline
How did you install ArchLinux?
If its NVMe or not you'd certainly know if you installed ArchLinux.
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
How did you install ArchLinux?
I have installed Archlinux from command line, I am quite sure that it's not yet a NVME because the result of lsblk is
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 238,5G 0 disk
├─sda1 8:1 0 500M 0 part
├─sda2 8:2 0 128M 0 part
├─sda3 8:3 0 119G 0 part
├─sda4 8:4 0 499M 0 part
├─sda5 8:5 0 11,7G 0 part
├─sda6 8:6 0 1,2G 0 part
└─sda7 8:7 0 103,2G 0 part
sdb 8:16 0 931,5G 0 disk
├─sdb1 8:17 0 128M 0 part
├─sdb2 8:18 0 877,4G 0 part
├─sdb3 8:19 0 51,3G 0 part /
├─sdb4 8:20 0 2,2G 0 part [SWAP]
└─sdb5 8:21 0 531M 0 part
But the real problem is that the temperature of the SSD on the PCIe is all the time high
Offline
That's true. I have a bunch of nvme drives, and it's a pain writing nvme0n1p2 and so, it can't be missed
That's M2 SSD. About temps, i don't know. Have you installed sensors?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
It's a Toshiba M2 SSD 250Go and when I use windows, the SSD temperature is normal but in linux SSD temperature is high
sensors command
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +43.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +43.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +43.0°C (high = +100.0°C, crit = +100.0°C)pch_skylake-virtual-0
Adapter: Virtual device
temp1: +46.5°Cacpitz-virtual-0
Adapter: Virtual device
temp1: +25.0°C (crit = +107.0°C)dell_smm-virtual-0
Adapter: Virtual device
Processor Fan: 0 RPM
Video Fan: 0 RPM
CPU: +44.0°C
Ambient: +40.0°C
SODIMM: +39.0°C
Other: +44.0°C
Offline
That seems to be normal temps to me
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
The CPU and the others vomponents are normal but the SSD overheating!
Offline
How do you know?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
The part of the Laptop where the M2 SSD is located heats up
Offline
Post your fstab
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb3 during installation
UUID=9a93fc29-b8b0-4aed-a15e-8f471e1092c3 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4AF9-1634 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda8 during installation
UUID=27791a58-e868-44b5-9d9b-eba0c743b24e none swap sw 0 0
# swap was on /dev/sdb4 during installation
UUID=5ae944a3-f2bb-4e03-9382-32b51a49892c none swap sw 0 0
Offline
https://wiki.archlinux.org/index.php/Hddtemp
https://www.archlinux.org/packages/community/any/iotop/
Also mount with "discard" and "noatime" or "relatime,lazytime" to reduce writing.
<50° is btw. not even close to "overheating" for an SSD (they can take far more heat than HDDs) - check whether there's high load by any process - notably the baloo/tracker/zeitgeist/iscanthediskpermanently nonsense is prone to cause this (esp. when they go wild)
You can also just try to measure the load on an idle system (multi-user.target, no GUI, no DE etc.) to see whether that makes a difference.
The answer to "hot" is always between "no fan" an "much load" and the resolution is to either bump the fan or drop the load.
Thus figure the actual system load - whether i's GPU, CPU or I/O.
I'm not sure whether there's any PM support for pre NVMe's :-(
Offline
Install TLP https://wiki.archlinux.org/index.php/TLP resolve the problem!
Thanks for your help!
Last edited by bOlaE (2017-10-22 11:00:33)
Offline
Notice that TLP is the notorious cause for all sorts of troubles (input devices or wifi failure etcetc.)
If you want to figure which PM configuration is the crucial one and in general more control on this, try powertop.
Offline
Notice that TLP is the notorious cause for all sorts of troubles (input devices or wifi failure etcetc.)
If you want to figure which PM configuration is the crucial one and in general more control on this, try powertop.
Ok! Thanks, I will try it!
Offline