You are not logged in.
- Topics: Active | Unanswered
#1 2017-10-24 16:50:00
- pspencil
- Member
- Registered: 2017-10-05
- Posts: 19
[SOLVED]PM: Device 1-7 failed to restore async: error -32 during hiber
Hi, I am using systemd for hibernation. The hibernation itself works fine but there are some error messages like the one posted in the subject. Googling didn't reveal much.
Here is the full dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.3-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=97781a21-321e-4db3-941a-54725fb6436f rw resume=/dev/sda4 intel_iommu=off quiet rw
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078152fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078153000-0x0000000078153fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078154000-0x0000000078154fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078155000-0x000000007e7f7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e7f8000-0x000000007f2c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f2c6000-0x000000007f33efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f33f000-0x000000007f7b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f7b3000-0x000000007fb8dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fb8e000-0x000000007fbfdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007fbfe000-0x000000007fbfefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fbff000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x7f2de000 ACPI=0x7f2de000 SMBIOS=0x7faff000 SMBIOS 3.0=0x7fafe000 ESRT=0x7d319d18
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GT73VR 7RE/MS-17A1, BIOS E17A1IMS.315 03/09/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fbff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000007d319d18 to 0x000000007d319d50.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8e6140097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x222d5e000, 0x222d5efff] PGTABLE
[ 0.000000] BRK [0x222d5f000, 0x222d5ffff] PGTABLE
[ 0.000000] BRK [0x222d60000, 0x222d60fff] PGTABLE
[ 0.000000] BRK [0x222d61000, 0x222d61fff] PGTABLE
[ 0.000000] BRK [0x222d62000, 0x222d62fff] PGTABLE
[ 0.000000] BRK [0x222d63000, 0x222d63fff] PGTABLE
[ 0.000000] BRK [0x222d64000, 0x222d64fff] PGTABLE
[ 0.000000] BRK [0x222d65000, 0x222d65fff] PGTABLE
[ 0.000000] BRK [0x222d66000, 0x222d66fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x372c7000-0x3795afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007F2DE000 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x000000007F2DE0B0 0000E4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007F308180 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007F2DE228 029F55 (v02 MSI_NB MEGABOOK 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000007F79AC40 000040
[ 0.000000] ACPI: APIC 0x000000007F308298 0000BC (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007F308358 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000007F3083A0 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[ 0.000000] ACPI: MCFG 0x000000007F308468 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007F3084A8 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: FIDT 0x000000007F3087D0 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x000000007F308870 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x000000007F3088C8 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007F308A40 00317F (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007F30BBC0 006975 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000007F312538 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007F312570 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000007F313358 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000007F3133A0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000007F314280 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000007F314318 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007F314340 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000007F3145E0 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007F314618 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x000000007F314670 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: TPM2 0x000000007F3146A8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: ASF! 0x000000007F3146E0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47effb000-0x47effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000047effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000078152fff]
[ 0.000000] node 0: [mem 0x0000000078155000-0x000000007e7f7fff]
[ 0.000000] node 0: [mem 0x000000007fbfe000-0x000000007fbfefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[ 0.000000] On node 0 totalpages: 4183955
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8032 pages used for memmap
[ 0.000000] DMA32 zone: 514039 pages, LIFO batch:31
[ 0.000000] Normal zone: 57280 pages used for memmap
[ 0.000000] Normal zone: 3665920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later)
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78153000-0x78153fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78154000-0x78154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e7f8000-0x7f2c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f2c6000-0x7f33efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f33f000-0x7f7b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f7b3000-0x7fb8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb8e000-0x7fbfdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fbff000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8e65bec00000 s106520 r8192 d32744 u262144
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4118556
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=97781a21-321e-4db3-941a-54725fb6436f rw resume=/dev/sda4 intel_iommu=off quiet rw
[ 0.000000] DMAR: IOMMU disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16300452K/16735820K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 435368K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 28108 entries in 110 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Detected 2900.000 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5810.00 BogoMIPS (lpj=9680000)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.034646] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.035314] Security Framework initialized
[ 0.035314] Yama: becoming mindful.
[ 0.037052] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.038021] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.038052] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038081] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038221] CPU: Physical Processor ID: 0
[ 0.038221] CPU: Processor Core ID: 0
[ 0.038224] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.038225] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.038229] mce: CPU supports 10 MCE banks
[ 0.038237] CPU0: Thermal monitoring enabled (TM1)
[ 0.038254] process: using mwait in idle threads
[ 0.038256] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.038256] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.038678] Freeing SMP alternatives memory: 24K
[ 0.041251] smpboot: Max logical packages: 2
[ 0.042453] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.046666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076666] smpboot: CPU0: Intel(R) Core(TM) i7-7820HK CPU @ 2.90GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.086680] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.086725] ... version: 4
[ 0.086725] ... bit width: 48
[ 0.086726] ... generic registers: 4
[ 0.086726] ... value mask: 0000ffffffffffff
[ 0.086727] ... max period: 00007fffffffffff
[ 0.086727] ... fixed-purpose events: 3
[ 0.086728] ... event mask: 000000070000000f
[ 0.093338] Hierarchical SRCU implementation.
[ 0.106793] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113337] smp: Bringing up secondary CPUs ...
[ 0.140038] x86: Booting SMP configuration:
[ 0.140039] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.883362] smp: Brought up 1 node, 8 CPUs
[ 0.883362] smpboot: Total of 8 processors activated (46474.78 BogoMIPS)
[ 0.887010] devtmpfs: initialized
[ 0.887010] x86/mm: Memory block size: 128MB
[ 0.887558] PM: Registering ACPI NVS region [mem 0x78153000-0x78153fff] (4096 bytes)
[ 0.887558] PM: Registering ACPI NVS region [mem 0x7f33f000-0x7f7b2fff] (4669440 bytes)
[ 0.887558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.887558] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.887558] pinctrl core: initialized pinctrl subsystem
[ 0.887558] RTC time: 17:58:17, date: 10/07/17
[ 0.887558] NET: Registered protocol family 16
[ 0.887558] cpuidle: using governor ladder
[ 0.887558] cpuidle: using governor menu
[ 0.887558] PCCT header not found.
[ 0.887558] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.887558] ACPI: bus type PCI registered
[ 0.887558] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.887558] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.887558] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.887558] PCI: Using configuration type 1 for base access
[ 0.890023] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.890023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.890034] ACPI: Added _OSI(Module Device)
[ 0.890035] ACPI: Added _OSI(Processor Device)
[ 0.890035] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.890036] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.890038] ACPI: EC: EC started
[ 0.890039] ACPI: EC: interrupt blocked
[ 0.892926] ACPI: \: Used as first EC
[ 0.892927] ACPI: \: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.892928] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.894075] ACPI: Executed 34 blocks of module-level executable AML code
[ 0.908522] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.912635] ACPI: Dynamic OEM Table Load:
[ 0.912641] ACPI: SSDT 0xFFFF8E65AC0C1800 000684 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.912777] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.912831] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.913874] ACPI: Dynamic OEM Table Load:
[ 0.913878] ACPI: SSDT 0xFFFF8E65AC0C0000 000469 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.913997] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.914308] ACPI: Dynamic OEM Table Load:
[ 0.914312] ACPI: SSDT 0xFFFF8E65AC0C2800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.914591] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.914745] ACPI: Dynamic OEM Table Load:
[ 0.914748] ACPI: SSDT 0xFFFF8E65AC3CE800 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.914866] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.917010] ACPI: Interpreter enabled
[ 0.917045] ACPI: (supports S0 S3 S4 S5)
[ 0.917046] ACPI: Using IOAPIC for interrupt routing
[ 0.917076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.919843] ACPI: Power Resource [PG00] (on)
[ 0.920246] ACPI: Power Resource [PG01] (on)
[ 0.920519] ACPI: Power Resource [PG02] (on)
[ 0.921102] ACPI: Power Resource [WRST] (on)
[ 0.921377] ACPI: Power Resource [WRST] (on)
[ 0.921650] ACPI: Power Resource [WRST] (on)
[ 0.921922] ACPI: Power Resource [WRST] (on)
[ 0.922196] ACPI: Power Resource [WRST] (on)
[ 0.922471] ACPI: Power Resource [WRST] (on)
[ 0.922744] ACPI: Power Resource [WRST] (on)
[ 0.923018] ACPI: Power Resource [WRST] (on)
[ 0.923293] ACPI: Power Resource [WRST] (on)
[ 0.923571] ACPI: Power Resource [WRST] (on)
[ 0.923845] ACPI: Power Resource [WRST] (on)
[ 0.924115] ACPI: Power Resource [WRST] (on)
[ 0.924389] ACPI: Power Resource [WRST] (on)
[ 0.924660] ACPI: Power Resource [WRST] (on)
[ 0.924935] ACPI: Power Resource [WRST] (on)
[ 0.925209] ACPI: Power Resource [WRST] (on)
[ 0.925481] ACPI: Power Resource [WRST] (on)
[ 0.926514] ACPI: Power Resource [WRST] (on)
[ 0.926793] ACPI: Power Resource [WRST] (on)
[ 0.927064] ACPI: Power Resource [WRST] (on)
[ 0.939949] ACPI: Power Resource [FN00] (off)
[ 0.940018] ACPI: Power Resource [FN01] (off)
[ 0.940081] ACPI: Power Resource [FN02] (off)
[ 0.940142] ACPI: Power Resource [FN03] (off)
[ 0.940203] ACPI: Power Resource [FN04] (off)
[ 0.941116] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.941120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.941146] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.941625] PCI host bridge to bus 0000:00
[ 0.941627] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.941628] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.941629] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.941630] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.941630] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.941631] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.941632] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.941633] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.941633] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.941634] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.941635] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.941636] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.941636] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.941637] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.941638] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.941638] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.941639] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.941640] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[ 0.941641] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.941642] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.941648] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[ 0.941931] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.941966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.942134] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.942144] pci 0000:00:08.0: reg 0x10: [mem 0xdc12f000-0xdc12ffff 64bit]
[ 0.942278] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.942297] pci 0000:00:14.0: reg 0x10: [mem 0xdc110000-0xdc11ffff 64bit]
[ 0.942355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.942520] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.942539] pci 0000:00:14.2: reg 0x10: [mem 0xdc12e000-0xdc12efff 64bit]
[ 0.942686] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.942710] pci 0000:00:16.0: reg 0x10: [mem 0xdc12d000-0xdc12dfff 64bit]
[ 0.942776] pci 0000:00:16.0: PME# supported from D3hot
[ 0.942909] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.942924] pci 0000:00:17.0: reg 0x10: [mem 0xdc128000-0xdc129fff]
[ 0.942930] pci 0000:00:17.0: reg 0x14: [mem 0xdc12c000-0xdc12c0ff]
[ 0.942936] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.942942] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.942948] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.942954] pci 0000:00:17.0: reg 0x24: [mem 0xdc12b000-0xdc12b7ff]
[ 0.942989] pci 0000:00:17.0: PME# supported from D3hot
[ 0.943110] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.943166] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.943299] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.943358] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.943488] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.943545] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.943674] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[ 0.943736] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.943874] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.943930] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.944081] pci 0000:00:1f.0: [8086:a154] type 00 class 0x060100
[ 0.944288] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.944300] pci 0000:00:1f.2: reg 0x10: [mem 0xdc124000-0xdc127fff]
[ 0.944442] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[ 0.944465] pci 0000:00:1f.3: reg 0x10: [mem 0xdc120000-0xdc123fff 64bit]
[ 0.944488] pci 0000:00:1f.3: reg 0x20: [mem 0xdc100000-0xdc10ffff 64bit]
[ 0.944532] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.944697] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.944757] pci 0000:00:1f.4: reg 0x10: [mem 0xdc12a000-0xdc12a0ff 64bit]
[ 0.944826] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.945035] pci 0000:01:00.0: [10de:1be1] type 00 class 0x030000
[ 0.945053] pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
[ 0.945062] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.945071] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.945077] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.945084] pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
[ 0.945193] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[ 0.945205] pci 0000:01:00.1: reg 0x10: [mem 0xdc080000-0xdc083fff]
[ 0.953349] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.953350] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.953352] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 0.953355] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.953443] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[ 0.953472] pci 0000:02:00.0: reg 0x10: [mem 0xdc200000-0xdc3fffff 64bit]
[ 0.953573] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.953682] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.953685] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc3fffff]
[ 0.953771] pci 0000:03:00.0: [10ec:5250] type 00 class 0xff0000
[ 0.953792] pci 0000:03:00.0: reg 0x10: [mem 0xdc601000-0xdc601fff]
[ 0.953799] pci 0000:03:00.0: reg 0x14: [mem 0xdc600000-0xdc600fff]
[ 0.953888] pci 0000:03:00.0: supports D1 D2
[ 0.953889] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.953988] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.953992] pci 0000:00:1c.2: bridge window [mem 0xdc600000-0xdc6fffff]
[ 0.954076] pci 0000:04:00.0: [1969:e0b1] type 00 class 0x020000
[ 0.954106] pci 0000:04:00.0: reg 0x10: [mem 0xdc500000-0xdc53ffff 64bit]
[ 0.954116] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.954218] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.954307] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.954309] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.954311] pci 0000:00:1c.3: bridge window [mem 0xdc500000-0xdc5fffff]
[ 0.954395] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[ 0.954398] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.954402] pci 0000:00:1c.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[ 0.954480] pci 0000:3e:00.0: [144d:a804] type 00 class 0x010802
[ 0.954505] pci 0000:3e:00.0: reg 0x10: [mem 0xdc400000-0xdc403fff 64bit]
[ 0.954686] pci 0000:00:1d.0: PCI bridge to [bus 3e]
[ 0.954689] pci 0000:00:1d.0: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.957238] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.957317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957430] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957467] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.957964] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.958835] ACPI: EC: EC stopped
[ 0.958836] ACPI: EC: EC started
[ 0.958836] ACPI: EC: interrupt blocked
[ 0.960331] ACPI: EC: interrupt unblocked
[ 0.960343] ACPI: EC: event unblocked
[ 0.960353] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.960354] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events
[ 0.960434] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.960435] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.960477] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.960477] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.960477] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.960477] vgaarb: loaded
[ 0.960477] EDAC MC: Ver: 3.0.0
[ 0.960477] Registered efivars operations
[ 0.978545] PCI: Using ACPI for IRQ routing
[ 1.001514] PCI: pci_cache_line_size set to 64 bytes
[ 1.001572] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 1.001573] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.001573] e820: reserve RAM buffer [mem 0x78153000-0x7bffffff]
[ 1.001574] e820: reserve RAM buffer [mem 0x7e7f8000-0x7fffffff]
[ 1.001575] e820: reserve RAM buffer [mem 0x7fbff000-0x7fffffff]
[ 1.001576] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[ 1.001626] NetLabel: Initializing
[ 1.001626] NetLabel: domain hash size = 128
[ 1.001627] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.001639] NetLabel: unlabeled traffic allowed by default
[ 1.001650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.001650] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 1.003348] clocksource: Switched to clocksource hpet
[ 1.009306] VFS: Disk quotas dquot_6.6.0
[ 1.009319] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.009360] pnp: PnP ACPI init
[ 1.009491] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[ 1.009520] pnp 00:01: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002 PNP0f13 (active)
[ 1.009624] system 00:02: [io 0x0680-0x069f] has been reserved
[ 1.009626] system 00:02: [io 0xffff] has been reserved
[ 1.009626] system 00:02: [io 0xffff] has been reserved
[ 1.009627] system 00:02: [io 0xffff] has been reserved
[ 1.009628] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 1.009629] system 00:02: [io 0x164e-0x164f] has been reserved
[ 1.009631] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.009707] system 00:03: [io 0x0800-0x087f] has been reserved
[ 1.009708] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.009720] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.009747] system 00:05: [io 0x1854-0x1857] has been reserved
[ 1.009749] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.010373] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.010374] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.010375] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.010376] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.010378] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.010379] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.010380] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.010381] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 1.010382] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.010383] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 1.010386] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.010419] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 1.010419] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 1.010420] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 1.010421] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 1.010422] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 1.010423] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 1.010424] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 1.010426] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.010679] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 1.010680] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011625] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 1.011626] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 1.011627] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 1.011628] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.012341] pnp: PnP ACPI: found 10 devices
[ 1.019893] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.019918] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000
[ 1.019926] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.019927] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.019929] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.019931] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.019933] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 1.019935] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.019938] pci 0000:00:1c.0: bridge window [mem 0xdc200000-0xdc3fffff]
[ 1.019943] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.019945] pci 0000:00:1c.2: bridge window [mem 0xdc600000-0xdc6fffff]
[ 1.019950] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.019951] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.019954] pci 0000:00:1c.3: bridge window [mem 0xdc500000-0xdc5fffff]
[ 1.019958] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[ 1.019960] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 1.019963] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff]
[ 1.019965] pci 0000:00:1c.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[ 1.019969] pci 0000:00:1d.0: PCI bridge to [bus 3e]
[ 1.019971] pci 0000:00:1d.0: bridge window [mem 0xdc400000-0xdc4fffff]
[ 1.019976] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.019977] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.019978] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.019979] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.019980] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.019981] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.019981] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.019982] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.019983] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.019984] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.019984] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.019985] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.019986] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.019987] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.019987] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.019988] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.019989] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[ 1.019990] pci_bus 0000:00: resource 21 [mem 0xfc000000-0xfc00ffff window]
[ 1.019991] pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
[ 1.019991] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.019992] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 1.019993] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 1.019994] pci_bus 0000:02: resource 1 [mem 0xdc200000-0xdc3fffff]
[ 1.019995] pci_bus 0000:03: resource 1 [mem 0xdc600000-0xdc6fffff]
[ 1.019996] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.019996] pci_bus 0000:04: resource 1 [mem 0xdc500000-0xdc5fffff]
[ 1.019997] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.019998] pci_bus 0000:05: resource 1 [mem 0xc4000000-0xda0fffff]
[ 1.019998] pci_bus 0000:05: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
[ 1.019999] pci_bus 0000:3e: resource 1 [mem 0xdc400000-0xdc4fffff]
[ 1.020151] NET: Registered protocol family 2
[ 1.020258] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.020398] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.020473] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.020498] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.020528] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.020574] NET: Registered protocol family 1
[ 1.020795] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.020809] PCI: CLS 64 bytes, default 64
[ 1.020832] Unpacking initramfs...
[ 1.110722] Freeing initrd memory: 6736K
[ 1.110726] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.110728] software IO TLB [mem 0x72d9e000-0x76d9e000] (64MB) mapped at [ffff8e61b2d9e000-ffff8e61b6d9dfff]
[ 1.110947] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[ 1.111155] Scanning for low memory corruption every 60 seconds
[ 1.111608] Initialise system trusted keyrings
[ 1.111615] Key type blacklist registered
[ 1.111668] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.112371] zbud: loaded
[ 1.113413] Key type asymmetric registered
[ 1.113433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.113481] io scheduler noop registered
[ 1.113481] io scheduler deadline registered
[ 1.113498] io scheduler cfq registered (default)
[ 1.113499] io scheduler mq-deadline registered
[ 1.113499] io scheduler kyber registered
[ 1.113514] io scheduler bfq registered
[ 1.114351] efifb: probing for efifb
[ 1.114359] efifb: framebuffer at 0xb0000000, using 8640k, total 8640k
[ 1.114359] efifb: mode is 1920x1080x32, linelength=8192, pages=1
[ 1.114360] efifb: scrolling: redraw
[ 1.114361] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.117639] Console: switching to colour frame buffer device 240x67
[ 1.120813] fb0: EFI VGA frame buffer device
[ 1.120818] intel_idle: MWAIT substates: 0x11142120
[ 1.120819] intel_idle: v0.4.1 model 0x9E
[ 1.121183] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.121311] GHES: HEST is not enabled!
[ 1.121381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.121833] Linux agpgart interface v0.103
[ 1.122338] rtc_cmos 00:04: RTC can wake from S4
[ 1.122716] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.122796] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.122800] intel_pstate: Intel P-state driver initializing
[ 1.122811] intel_pstate: Disabling energy efficiency optimization
[ 1.123636] intel_pstate: HWP enabled
[ 1.123881] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.123916] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 1.124039] NET: Registered protocol family 10
[ 1.126858] Segment Routing with IPv6
[ 1.126868] NET: Registered protocol family 17
[ 1.127449] RAS: Correctable Errors collector initialized.
[ 1.127462] microcode: sig=0x906e9, pf=0x20, revision=0x48
[ 1.127779] microcode: Microcode Update Driver: v2.2.
[ 1.127784] sched_clock: Marking stable (1127777804, 0)->(1238023234, -110245430)
[ 1.128361] registered taskstats version 1
[ 1.128364] Loading compiled-in X.509 certificates
[ 1.128373] zswap: loaded using pool lzo/zbud
[ 1.129272] Magic number: 5:795:996
[ 1.129314] memory memory39: hash matches
[ 1.129463] rtc_cmos 00:04: setting system clock to 2017-10-07 17:58:17 UTC (1507399097)
[ 1.129846] PM: Checking hibernation image partition /dev/sda4
[ 1.129847] PM: Hibernation image not present or could not be loaded.
[ 1.130581] Freeing unused kernel memory: 1328K
[ 1.130582] Write protecting the kernel read-only data: 10240k
[ 1.131001] Freeing unused kernel memory: 1576K
[ 1.131107] Freeing unused kernel memory: 12K
[ 1.212932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.217568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.217603] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.221316] ACPI: bus type USB registered
[ 1.221332] usbcore: registered new interface driver usbfs
[ 1.221338] usbcore: registered new interface driver hub
[ 1.221360] usbcore: registered new device driver usb
[ 1.221419] SCSI subsystem initialized
[ 1.222364] sdhci: Secure Digital Host Controller Interface driver
[ 1.222365] sdhci: Copyright(c) Pierre Ossman
[ 1.222717] nvme nvme0: pci function 0000:3e:00.0
[ 1.222888] libata version 3.00 loaded.
[ 1.222959] sdhci-pci 0000:03:00.0: SDHCI controller found [10ec:5250] (rev 1)
[ 1.222993] sdhci-pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 1.223155] mmc0: Unknown controller version (3). You may experience problems.
[ 1.223169] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.223176] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.223267] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
[ 1.224409] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.224413] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.224591] hub 1-0:1.0: USB hub found
[ 1.224634] hub 1-0:1.0: 16 ports detected
[ 1.225350] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.225352] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.225432] hub 2-0:1.0: USB hub found
[ 1.225450] hub 2-0:1.0: 10 ports detected
[ 1.225733] usb: port power management may be unreliable
[ 1.226096] ahci 0000:00:17.0: version 3.0
[ 1.226268] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xe impl SATA mode
[ 1.226270] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.247221] scsi host0: ahci
[ 1.247499] scsi host1: ahci
[ 1.247796] scsi host2: ahci
[ 1.248036] scsi host3: ahci
[ 1.248061] ata1: DUMMY
[ 1.248065] ata2: SATA max UDMA/133 abar m2048@0xdc12b000 port 0xdc12b180 irq 122
[ 1.248069] ata3: SATA max UDMA/133 abar m2048@0xdc12b000 port 0xdc12b200 irq 122
[ 1.248074] ata4: SATA max UDMA/133 abar m2048@0xdc12b000 port 0xdc12b280 irq 122
[ 1.251875] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.448560] nvme0n1: p1 p2 p3 p4
[ 1.543503] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.556752] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.556787] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.556811] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.558292] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133
[ 1.558295] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.560051] ata4.00: configured for UDMA/133
[ 1.560294] scsi 3:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5
[ 1.600744] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.600747] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.600757] sd 3:0:0:0: [sda] Write Protect is off
[ 1.600760] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.600775] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.668311] sda: sda1 sda2 sda3 sda4
[ 1.669074] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.676895] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.677932] usbcore: registered new interface driver usbhid
[ 1.677933] usbhid: USB HID core driver
[ 1.678586] hid-generic 0003:05AC:1392.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Inc. Apple Watch Magnetic Charging Cable] on usb-0000:00:14.0-1/input0
[ 1.843427] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 1.974149] hub 1-2:1.0: USB hub found
[ 1.974228] hub 1-2:1.0: 3 ports detected
[ 2.086830] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 2.133701] clocksource: Switched to clocksource tsc
[ 2.272009] PM: Starting manual resume from disk
[ 2.272012] PM: Hibernation image partition 8:4 present
[ 2.272013] PM: Looking for hibernation image.
[ 2.272106] PM: Image not found (code -22)
[ 2.272107] PM: Hibernation image not present or could not be loaded.
[ 2.306765] usb 1-2.1: new full-speed USB device number 5 using xhci_hcd
[ 2.426400] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0003/input/input2
[ 2.450424] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.480284] hid-generic 0003:0853:0100.0003: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[ 2.526820] usb 1-9: new full-speed USB device number 6 using xhci_hcd
[ 2.659288] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1532:0054.0004/input/input3
[ 2.659400] hid-generic 0003:1532:0054.0004: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-9/input0
[ 2.826733] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 3.321648] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.339980] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.340101] systemd[1]: Detected architecture x86-64.
[ 3.350283] systemd[1]: Set hostname to <pspencil>.
[ 3.375009] random: crng init done
[ 4.051755] systemd[1]: Listening on udev Kernel Socket.
[ 4.051798] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.051898] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.051916] systemd[1]: Listening on udev Control Socket.
[ 4.052148] systemd[1]: Created slice System Slice.
[ 4.052439] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.052754] systemd[1]: Mounting Huge Pages File System...
[ 4.323763] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 4.424017] systemd-journald[203]: Received request to flush runtime journal from PID 1
[ 5.811652] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 5.811691] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 5.933761] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/PNP0C09:01/PNP0C0D:00/input/input4
[ 5.933976] ACPI: Lid Switch [LID0]
[ 5.934020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 5.934024] ACPI: Sleep Button [SLPB]
[ 5.934042] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 5.934045] ACPI: Power Button [PWRB]
[ 5.934063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.934091] ACPI: Power Button [PWRF]
[ 6.247664] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.247692] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 6.248186] acpi device:13: registered as cooling_device13
[ 6.248217] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
[ 6.316848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.348781] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 6.348813] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 6.373062] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 6.373255] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.373256] ACPI: Thermal Zone [THRM] (52 C)
[ 6.390276] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 6.396548] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 6.396548] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.396549] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.396549] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.396549] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.396550] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 6.419393] Bluetooth: Core ver 2.22
[ 6.419400] NET: Registered protocol family 31
[ 6.419400] Bluetooth: HCI device and connection manager initialized
[ 6.419402] Bluetooth: HCI socket layer initialized
[ 6.419403] Bluetooth: L2CAP socket layer initialized
[ 6.419406] Bluetooth: SCO socket layer initialized
[ 6.423439] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.423440] ACPI: Thermal Zone [TZ00] (28 C)
[ 6.423539] thermal LNXTHERM:02: registered as thermal_zone3
[ 6.423539] ACPI: Thermal Zone [TZ01] (30 C)
[ 6.440074] ACPI: Battery Slot [BAT1] (battery present)
[ 6.440316] ACPI: AC Adapter [ADP1] (on-line)
[ 6.473768] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.508115] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.508330] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 6.508381] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.508383] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.624467] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
[ 6.624469] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=2 (0x19/0x1b/0x0/0x0/0x0)
[ 6.624471] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 6.624472] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.624473] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.624475] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.624477] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.624478] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.624479] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.635922] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.635978] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.636025] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.636076] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 6.655441] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.752656] iTCO_vendor_support: vendor-support=0
[ 6.754094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.754240] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 6.754373] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.839715] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:de:c8:11]
[ 6.857832] AVX2 version of gcm_enc/dec engaged.
[ 6.857833] AES CTR mode by8 optimization enabled
[ 6.872974] usbcore: registered new interface driver btusb
[ 6.873022] Bluetooth: HCI UART driver ver 2.3
[ 6.873023] Bluetooth: HCI UART protocol H4 registered
[ 6.873024] Bluetooth: HCI UART protocol BCSP registered
[ 6.873031] Bluetooth: HCI UART protocol LL registered
[ 6.873031] Bluetooth: HCI UART protocol ATH3K registered
[ 6.873032] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.873048] Bluetooth: HCI UART protocol Intel registered
[ 6.873054] Bluetooth: HCI UART protocol Broadcom registered
[ 6.873054] Bluetooth: HCI UART protocol QCA registered
[ 6.873054] Bluetooth: HCI UART protocol AG6XX registered
[ 6.873055] Bluetooth: HCI UART protocol Marvell registered
[ 6.992631] input: MSI WMI hotkeys as /devices/virtual/input/input15
[ 7.206485] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[ 7.234433] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[ 7.234440] psmouse serio1: synaptics: Your touchpad (PNP: SYN1509 SYN1500 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 7.291352] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728
[ 7.300701] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 7.300786] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 7.300861] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 7.326415] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 7.792589] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 7.792890] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 7.939645] intel_rapl: Found RAPL domain package
[ 7.939647] intel_rapl: Found RAPL domain core
[ 7.939649] intel_rapl: Found RAPL domain dram
[ 7.998377] alx 0000:04:00.0 enp4s0: renamed from eth0
[ 8.058832] mousedev: PS/2 mouse device common for all mice
[ 8.334198] Adding 7167996k swap on /dev/sda4. Priority:-1 extents:1 across:7167996k FS
[ 8.691849] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 8.691853] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8.692657] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32 4d458559
[ 8.780765] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 07ee144e
[ 9.001650] nvidia: loading out-of-tree module taints kernel.
[ 9.001653] nvidia: module license 'NVIDIA' taints kernel.
[ 9.001654] Disabling lock debugging due to kernel taint
[ 9.007114] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[ 9.007323] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.007377] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.90 Tue Sep 19 19:17:35 PDT 2017 (using threaded interrupts)
[ 9.040255] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.90 Tue Sep 19 17:05:19 PDT 2017
[ 9.043914] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 9.043915] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 9.346563] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 9.347206] ath10k_pci 0000:02:00.0: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 9.421757] ath: EEPROM regdomain: 0x6c
[ 9.421759] ath: EEPROM indicates we should expect a direct regpair map
[ 9.421761] ath: Country alpha2 being used: 00
[ 9.421761] ath: Regpair used: 0x6c
[ 9.625501] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 11.994524] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 11.995398] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 11.999732] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.697485] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 12.742537] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 13.517736] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 13.563971] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.037802] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.899690] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 22.288631] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288690] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288723] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288763] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288800] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288830] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.288860] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.735246] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.736095] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.736655] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.737219] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.737765] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.738312] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.738860] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.739423] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.739970] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.740519] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.741066] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.741613] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.742161] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.742708] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.743255] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.743821] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.744370] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 22.797613] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 23.170028] nvidia-modeset: Allocated GPU:0 (GPU-a57c8c89-8995-363d-d203-f9b63fbb5c22) @ PCI:0000:01:00.0
[ 23.171758] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 23.172841] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 23.173649] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 23.174395] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 23.913629] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[ 23.951454] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[ 23.953107] wlp2s0: authenticated
[ 23.956681] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[ 23.963128] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[ 23.965339] wlp2s0: associated
[ 23.965355] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 24.063862] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[ 89.076812] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 89.093894] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 89.156329] PM: Hibernation mode set to 'platform'
[ 90.061650] PM: Syncing filesystems ...
[ 90.336552] PM: done.
[ 90.336556] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 90.338159] OOM killer disabled.
[ 90.338402] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 90.338404] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[ 90.338405] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 90.338410] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[ 90.338411] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[ 90.338573] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[ 90.340542] PM: Basic memory bitmaps created
[ 90.340823] PM: Preallocating image memory... done (allocated 481571 pages)
[ 90.567998] PM: Allocated 1926284 kbytes in 0.22 seconds (8755.83 MB/s)
[ 90.567998] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 90.569211] Suspending console(s) (use no_console_suspend to debug)
[ 90.916130] PM: freeze of devices complete after 346.917 msecs
[ 90.916526] PM: late freeze of devices complete after 0.393 msecs
[ 90.933402] PM: noirq freeze of devices complete after 16.875 msecs
[ 90.933656] ACPI: Preparing to enter system sleep state S4
[ 91.013454] ACPI: EC: event blocked
[ 91.013454] ACPI: EC: EC stopped
[ 91.013455] PM: Saving platform NVS memory
[ 91.016503] Disabling non-boot CPUs ...
[ 91.041423] smpboot: CPU 1 is now offline
[ 91.074745] smpboot: CPU 2 is now offline
[ 91.104731] smpboot: CPU 3 is now offline
[ 91.135259] smpboot: CPU 4 is now offline
[ 91.164653] smpboot: CPU 5 is now offline
[ 91.194652] smpboot: CPU 6 is now offline
[ 91.221298] smpboot: CPU 7 is now offline
[ 91.222805] PM: Creating hibernation image:
[ 91.379496] PM: Need to copy 483561 pages
[ 91.379498] PM: Normal pages needed: 483561 + 1024, available pages: 3700084
[ 91.223510] PM: Restoring platform NVS memory
[ 91.223899] ACPI: EC: EC started
[ 91.224605] Suspended for 50.407 seconds
[ 91.224657] Enabling non-boot CPUs ...
[ 91.224680] x86: Booting SMP configuration:
[ 91.224680] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 91.225195] cache: parent cpu1 should not be sleeping
[ 91.225290] CPU1 is up
[ 91.225303] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 91.225815] cache: parent cpu2 should not be sleeping
[ 91.225918] CPU2 is up
[ 91.225931] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 91.226442] cache: parent cpu3 should not be sleeping
[ 91.226551] CPU3 is up
[ 91.226562] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 91.227155] cache: parent cpu4 should not be sleeping
[ 91.227276] CPU4 is up
[ 91.227292] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 91.227799] cache: parent cpu5 should not be sleeping
[ 91.227919] CPU5 is up
[ 91.227932] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 91.228450] cache: parent cpu6 should not be sleeping
[ 91.228579] CPU6 is up
[ 91.228591] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 91.229115] cache: parent cpu7 should not be sleeping
[ 91.229248] CPU7 is up
[ 91.235718] ACPI: Waking up from system sleep state S4
[ 91.286387] PM: noirq restore of devices complete after 14.855 msecs
[ 91.286686] PM: early restore of devices complete after 0.248 msecs
[ 91.349815] usb usb1: root hub lost power or was reset
[ 91.349816] usb usb2: root hub lost power or was reset
[ 91.349890] ACPI: EC: event unblocked
[ 91.350564] ACPI: button: The lid device is not compliant to SW_LID.
[ 91.359869] sd 3:0:0:0: [sda] Starting disk
[ 91.686368] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[ 91.690711] ata2: SATA link down (SStatus 4 SControl 300)
[ 91.690757] ata3: SATA link down (SStatus 4 SControl 300)
[ 91.690792] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 91.735070] ata4.00: configured for UDMA/133
[ 91.929842] usb 1-9: reset full-speed USB device number 6 using xhci_hcd
[ 92.025703] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[ 92.056166] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[ 92.173172] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[ 92.305194] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[ 92.305201] PM: Device 1-7 failed to restore async: error -32
[ 92.416547] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 92.659872] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[ 92.879890] usb 1-2.1: reset full-speed USB device number 5 using xhci_hcd
[ 92.994870] PM: restore of devices complete after 1645.120 msecs
[ 92.995307] usb 1-10:1.0: rebind failed: -517
[ 92.995311] usb 1-10:1.1: rebind failed: -517
[ 92.995870] acpi LNXPOWER:16: Turning OFF
[ 92.996004] acpi LNXPOWER:15: Turning OFF
[ 92.996134] acpi LNXPOWER:14: Turning OFF
[ 92.996264] acpi LNXPOWER:13: Turning OFF
[ 92.996419] acpi LNXPOWER:12: Turning OFF
[ 92.996547] acpi LNXPOWER:11: Turning OFF
[ 92.996674] acpi LNXPOWER:10: Turning OFF
[ 92.996803] acpi LNXPOWER:0f: Turning OFF
[ 92.996931] acpi LNXPOWER:0e: Turning OFF
[ 92.997059] acpi LNXPOWER:0d: Turning OFF
[ 92.997188] acpi LNXPOWER:0c: Turning OFF
[ 92.997317] acpi LNXPOWER:0b: Turning OFF
[ 92.997444] acpi LNXPOWER:0a: Turning OFF
[ 92.997572] acpi LNXPOWER:09: Turning OFF
[ 92.997700] acpi LNXPOWER:08: Turning OFF
[ 92.997828] acpi LNXPOWER:07: Turning OFF
[ 92.997955] acpi LNXPOWER:06: Turning OFF
[ 92.998082] acpi LNXPOWER:05: Turning OFF
[ 92.998208] acpi LNXPOWER:04: Turning OFF
[ 92.998337] acpi LNXPOWER:03: Turning OFF
[ 92.998432] PM: Image restored successfully.
[ 92.998481] PM: Basic memory bitmaps freed
[ 92.998487] OOM killer enabled.
[ 92.998488] Restarting tasks ...
[ 92.998599] usb 1-7: USB disconnect, device number 4
[ 93.000666] done.
[ 93.053233] video LNXVIDEO:01: Restoring backlight state
[ 93.063302] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 93.063304] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 93.092301] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 93.169821] usb 1-7: new full-speed USB device number 8 using xhci_hcd
[ 93.378212] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 93.378896] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 93.379996] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 94.080591] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 94.131534] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 94.195622] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 99.059107] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[ 99.097102] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[ 99.100083] wlp2s0: authenticated
[ 99.106411] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[ 99.109276] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[ 99.111586] wlp2s0: associated
[ 99.111617] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 99.183715] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[ 8821.048069] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:b9:c0
[ 8821.057842] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[ 8821.108872] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[ 8821.110653] wlp2s0: authenticated
[ 8821.114944] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[ 8821.171303] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[ 8821.173767] wlp2s0: associated
[ 8821.258524] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[ 8853.818818] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 8855.934809] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[ 8855.972892] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[ 8855.974409] wlp2s0: authenticated
[ 8855.978283] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[ 8855.981047] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[ 8855.983412] wlp2s0: associated
[ 8856.072270] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[30501.598300] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[30506.718306] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[30507.735903] wlp2s0: authenticate with 24:de:c6:52:ca:58
[30507.776575] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[30507.778120] wlp2s0: authenticated
[30507.781510] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[30507.784477] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[30507.786774] wlp2s0: associated
[30507.789984] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:ca:58
[30541.021216] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[30541.030641] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[30541.067785] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[30541.069616] wlp2s0: authenticated
[30541.074817] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[30541.077557] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[30541.079567] wlp2s0: associated
[30541.146589] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[33803.834360] usb 1-4: new high-speed USB device number 9 using xhci_hcd
[52875.445036] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[59571.022972] usb 1-4: USB disconnect, device number 9
[60661.176791] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[60661.185561] wlp2s0: authenticate with 24:de:c6:52:ca:58
[60661.227166] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[60661.228832] wlp2s0: authenticated
[60661.233345] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[60661.236582] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[60661.238845] wlp2s0: associated
[60661.336236] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:ca:58
[60698.253534] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[60698.262956] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[60698.300363] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[60698.302025] wlp2s0: authenticated
[60698.306674] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[60698.309358] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[60698.311585] wlp2s0: associated
[60698.348518] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[71361.426223] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[71361.441107] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71361.483236] PM: Hibernation mode set to 'platform'
[71362.369970] PM: Syncing filesystems ...
[71362.702181] PM: done.
[71362.702183] Freezing user space processes ... (elapsed 0.001 seconds) done.
[71362.703639] OOM killer disabled.
[71362.703823] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[71362.703825] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[71362.703826] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[71362.703829] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[71362.703830] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[71362.703941] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[71362.705291] PM: Basic memory bitmaps created
[71362.705517] PM: Preallocating image memory... done (allocated 1498016 pages)
[71363.018540] PM: Allocated 5992064 kbytes in 0.31 seconds (19329.23 MB/s)
[71363.018540] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[71363.019806] Suspending console(s) (use no_console_suspend to debug)
[71363.360961] PM: freeze of devices complete after 341.153 msecs
[71363.361387] PM: late freeze of devices complete after 0.424 msecs
[71363.375054] PM: noirq freeze of devices complete after 13.664 msecs
[71363.375308] ACPI: Preparing to enter system sleep state S4
[71363.455098] ACPI: EC: event blocked
[71363.455098] ACPI: EC: EC stopped
[71363.455099] PM: Saving platform NVS memory
[71363.458133] Disabling non-boot CPUs ...
[71363.483040] smpboot: CPU 1 is now offline
[71363.526355] smpboot: CPU 2 is now offline
[71363.559725] smpboot: CPU 3 is now offline
[71363.589933] smpboot: CPU 4 is now offline
[71363.626253] smpboot: CPU 5 is now offline
[71363.659580] smpboot: CPU 6 is now offline
[71363.676239] smpboot: CPU 7 is now offline
[71363.677725] PM: Creating hibernation image:
[71363.804063] PM: Need to copy 1500277 pages
[71363.804064] PM: Normal pages needed: 1500277 + 1024, available pages: 2683359
[71363.678431] PM: Restoring platform NVS memory
[71363.678827] ACPI: EC: EC started
[71363.679533] Suspended for 588.543 seconds
[71363.679565] Enabling non-boot CPUs ...
[71363.679596] x86: Booting SMP configuration:
[71363.679597] smpboot: Booting Node 0 Processor 1 APIC 0x2
[71363.680111] cache: parent cpu1 should not be sleeping
[71363.680209] CPU1 is up
[71363.680222] smpboot: Booting Node 0 Processor 2 APIC 0x4
[71363.680733] cache: parent cpu2 should not be sleeping
[71363.680838] CPU2 is up
[71363.680851] smpboot: Booting Node 0 Processor 3 APIC 0x6
[71363.681369] cache: parent cpu3 should not be sleeping
[71363.681478] CPU3 is up
[71363.681490] smpboot: Booting Node 0 Processor 4 APIC 0x1
[71363.682096] cache: parent cpu4 should not be sleeping
[71363.682214] CPU4 is up
[71363.682229] smpboot: Booting Node 0 Processor 5 APIC 0x3
[71363.682651] cache: parent cpu5 should not be sleeping
[71363.682780] CPU5 is up
[71363.682792] smpboot: Booting Node 0 Processor 6 APIC 0x5
[71363.683338] cache: parent cpu6 should not be sleeping
[71363.683474] CPU6 is up
[71363.683485] smpboot: Booting Node 0 Processor 7 APIC 0x7
[71363.684007] cache: parent cpu7 should not be sleeping
[71363.684153] CPU7 is up
[71363.690653] ACPI: Waking up from system sleep state S4
[71363.741368] PM: noirq restore of devices complete after 15.176 msecs
[71363.741652] PM: early restore of devices complete after 0.257 msecs
[71363.858851] usb usb1: root hub lost power or was reset
[71363.858853] usb usb2: root hub lost power or was reset
[71363.858929] ACPI: EC: event unblocked
[71363.861707] sd 3:0:0:0: [sda] Starting disk
[71364.191882] ata2: SATA link down (SStatus 4 SControl 300)
[71364.191914] ata3: SATA link down (SStatus 4 SControl 300)
[71364.191997] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[71364.194539] ata4.00: configured for UDMA/133
[71364.198019] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[71364.441494] usb 1-7: reset full-speed USB device number 8 using xhci_hcd
[71364.525841] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[71364.554661] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[71364.573410] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[71364.573419] PM: Device 1-7 failed to restore async: error -32
[71366.752962] PM: restore of devices complete after 2894.191 msecs
[71366.753333] usb 1-10:1.0: rebind failed: -517
[71366.753336] usb 1-10:1.1: rebind failed: -517
[71366.753769] acpi LNXPOWER:16: Turning OFF
[71366.753871] acpi LNXPOWER:15: Turning OFF
[71366.753970] acpi LNXPOWER:14: Turning OFF
[71366.754070] acpi LNXPOWER:13: Turning OFF
[71366.754169] acpi LNXPOWER:12: Turning OFF
[71366.754266] acpi LNXPOWER:11: Turning OFF
[71366.754363] acpi LNXPOWER:10: Turning OFF
[71366.754462] acpi LNXPOWER:0f: Turning OFF
[71366.754560] acpi LNXPOWER:0e: Turning OFF
[71366.754673] acpi LNXPOWER:0d: Turning OFF
[71366.754776] acpi LNXPOWER:0c: Turning OFF
[71366.754875] acpi LNXPOWER:0b: Turning OFF
[71366.754972] acpi LNXPOWER:0a: Turning OFF
[71366.755071] acpi LNXPOWER:09: Turning OFF
[71366.755169] acpi LNXPOWER:08: Turning OFF
[71366.755266] acpi LNXPOWER:07: Turning OFF
[71366.755364] acpi LNXPOWER:06: Turning OFF
[71366.755461] acpi LNXPOWER:05: Turning OFF
[71366.755557] acpi LNXPOWER:04: Turning OFF
[71366.755655] acpi LNXPOWER:03: Turning OFF
[71366.755728] PM: Image restored successfully.
[71366.755787] PM: Basic memory bitmaps freed
[71366.755791] OOM killer enabled.
[71366.755792] Restarting tasks ... done.
[71366.760571] usb 1-1: USB disconnect, device number 2
[71366.764140] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[71366.764141] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[71366.771483] usb 1-2: USB disconnect, device number 3
[71366.771485] usb 1-2.1: USB disconnect, device number 5
[71366.791967] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[71366.808139] video LNXVIDEO:01: Restoring backlight state
[71366.885446] usb 1-7: USB disconnect, device number 8
[71367.014786] usb 1-7: new full-speed USB device number 10 using xhci_hcd
[71367.126627] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[71367.127250] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[71367.128729] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71367.153316] usb 1-9: USB disconnect, device number 6
[71367.828938] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[71367.878599] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71368.655676] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[71368.707418] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71368.769065] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71373.630629] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[71378.528314] wlp2s0: authenticate with 24:de:c6:c3:64:e8
[71378.565526] wlp2s0: send auth to 24:de:c6:c3:64:e8 (try 1/3)
[71378.611525] wlp2s0: authenticated
[71378.614713] wlp2s0: associate with 24:de:c6:c3:64:e8 (try 1/3)
[71378.617388] wlp2s0: RX AssocResp from 24:de:c6:c3:64:e8 (capab=0x1411 status=0 aid=3)
[71378.619650] wlp2s0: associated
[71378.619682] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[71378.716236] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:c3:64:e8
[72426.004472] wlp2s0: disconnect from AP 24:de:c6:c3:64:e8 for new auth to 24:de:c6:ec:b2:b0
[72426.013819] wlp2s0: authenticate with 24:de:c6:ec:b2:b0
[72426.046860] wlp2s0: send auth to 24:de:c6:ec:b2:b0 (try 1/3)
[72426.048514] wlp2s0: authenticated
[72426.051175] wlp2s0: associate with 24:de:c6:ec:b2:b0 (try 1/3)
[72426.053748] wlp2s0: RX AssocResp from 24:de:c6:ec:b2:b0 (capab=0x1411 status=0 aid=3)
[72426.055897] wlp2s0: associated
[72426.094615] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b2:b0
[72666.043754] wlp2s0: disconnect from AP 24:de:c6:ec:b2:b0 for new auth to 24:de:c6:c3:64:e8
[72666.053000] wlp2s0: authenticate with 24:de:c6:c3:64:e8
[72666.090552] wlp2s0: send auth to 24:de:c6:c3:64:e8 (try 1/3)
[72666.092187] wlp2s0: authenticated
[72666.094466] wlp2s0: associate with 24:de:c6:c3:64:e8 (try 1/3)
[72666.097339] wlp2s0: RX AssocResp from 24:de:c6:c3:64:e8 (capab=0x1411 status=0 aid=3)
[72666.099618] wlp2s0: associated
[72666.124977] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:c3:64:e8
[75786.066378] wlp2s0: disconnect from AP 24:de:c6:c3:64:e8 for new auth to 24:de:c6:ec:b2:b0
[75786.074738] wlp2s0: authenticate with 24:de:c6:ec:b2:b0
[75786.107930] wlp2s0: send auth to 24:de:c6:ec:b2:b0 (try 1/3)
[75786.109595] wlp2s0: authenticated
[75786.110651] wlp2s0: associate with 24:de:c6:ec:b2:b0 (try 1/3)
[75786.113290] wlp2s0: RX AssocResp from 24:de:c6:ec:b2:b0 (capab=0x1411 status=0 aid=2)
[75786.115377] wlp2s0: associated
[75786.138872] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b2:b0
[75906.000154] wlp2s0: disconnect from AP 24:de:c6:ec:b2:b0 for new auth to 24:de:c6:c3:64:e8
[75906.008996] wlp2s0: authenticate with 24:de:c6:c3:64:e8
[75906.046718] wlp2s0: send auth to 24:de:c6:c3:64:e8 (try 1/3)
[75906.048522] wlp2s0: authenticated
[75906.050611] wlp2s0: associate with 24:de:c6:c3:64:e8 (try 1/3)
[75906.053214] wlp2s0: RX AssocResp from 24:de:c6:c3:64:e8 (capab=0x1411 status=0 aid=3)
[75906.055358] wlp2s0: associated
[75906.153864] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:c3:64:e8
[76865.990580] wlp2s0: disconnect from AP 24:de:c6:c3:64:e8 for new auth to 24:de:c6:ec:b2:b0
[76865.999665] wlp2s0: authenticate with 24:de:c6:ec:b2:b0
[76866.033094] wlp2s0: send auth to 24:de:c6:ec:b2:b0 (try 1/3)
[76866.034763] wlp2s0: authenticated
[76866.037128] wlp2s0: associate with 24:de:c6:ec:b2:b0 (try 1/3)
[76866.039861] wlp2s0: RX AssocResp from 24:de:c6:ec:b2:b0 (capab=0x1411 status=0 aid=2)
[76866.042495] wlp2s0: associated
[76866.079888] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b2:b0
[77042.743881] wlp2s0: disconnect from AP 24:de:c6:ec:b2:b0 for new auth to 24:de:c6:c3:64:e8
[77042.752908] wlp2s0: authenticate with 24:de:c6:c3:64:e8
[77042.790350] wlp2s0: send auth to 24:de:c6:c3:64:e8 (try 1/3)
[77042.791967] wlp2s0: authenticated
[77042.793763] wlp2s0: associate with 24:de:c6:c3:64:e8 (try 1/3)
[77042.796687] wlp2s0: RX AssocResp from 24:de:c6:c3:64:e8 (capab=0x1411 status=0 aid=4)
[77042.798859] wlp2s0: associated
[77042.826105] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:c3:64:e8
[77249.219413] wlp2s0: deauthenticating from 24:de:c6:c3:64:e8 by local choice (Reason: 3=DEAUTH_LEAVING)
[77249.236606] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77249.307970] PM: Hibernation mode set to 'platform'
[77250.240355] PM: Syncing filesystems ...
[77250.495574] PM: done.
[77250.495576] Freezing user space processes ... (elapsed 0.001 seconds) done.
[77250.497131] OOM killer disabled.
[77250.497311] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[77250.497312] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[77250.497313] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[77250.497316] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[77250.497317] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[77250.497429] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[77250.498766] PM: Basic memory bitmaps created
[77250.498985] PM: Preallocating image memory... done (allocated 1594084 pages)
[77251.136562] PM: Allocated 6376336 kbytes in 0.63 seconds (10121.16 MB/s)
[77251.136562] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[77251.137896] Suspending console(s) (use no_console_suspend to debug)
[77251.505353] PM: freeze of devices complete after 367.454 msecs
[77251.505805] PM: late freeze of devices complete after 0.451 msecs
[77251.520453] PM: noirq freeze of devices complete after 14.646 msecs
[77251.520708] ACPI: Preparing to enter system sleep state S4
[77251.567177] ACPI: EC: event blocked
[77251.567177] ACPI: EC: EC stopped
[77251.567178] PM: Saving platform NVS memory
[77251.570079] Disabling non-boot CPUs ...
[77251.595105] smpboot: CPU 1 is now offline
[77251.635102] smpboot: CPU 2 is now offline
[77251.675080] smpboot: CPU 3 is now offline
[77251.705220] smpboot: CPU 4 is now offline
[77251.725060] smpboot: CPU 5 is now offline
[77251.754996] smpboot: CPU 6 is now offline
[77251.781648] smpboot: CPU 7 is now offline
[77251.783140] PM: Creating hibernation image:
[77251.904452] PM: Need to copy 1596330 pages
[77251.904454] PM: Normal pages needed: 1596330 + 1024, available pages: 2587331
[77251.783847] PM: Restoring platform NVS memory
[77251.784236] ACPI: EC: EC started
[77251.784943] Suspended for 502.897 seconds
[77251.784973] Enabling non-boot CPUs ...
[77251.785005] x86: Booting SMP configuration:
[77251.785005] smpboot: Booting Node 0 Processor 1 APIC 0x2
[77251.785520] cache: parent cpu1 should not be sleeping
[77251.785618] CPU1 is up
[77251.785630] smpboot: Booting Node 0 Processor 2 APIC 0x4
[77251.786143] cache: parent cpu2 should not be sleeping
[77251.786248] CPU2 is up
[77251.786260] smpboot: Booting Node 0 Processor 3 APIC 0x6
[77251.786778] cache: parent cpu3 should not be sleeping
[77251.786888] CPU3 is up
[77251.786899] smpboot: Booting Node 0 Processor 4 APIC 0x1
[77251.787513] cache: parent cpu4 should not be sleeping
[77251.787635] CPU4 is up
[77251.787649] smpboot: Booting Node 0 Processor 5 APIC 0x3
[77251.788072] cache: parent cpu5 should not be sleeping
[77251.788198] CPU5 is up
[77251.788210] smpboot: Booting Node 0 Processor 6 APIC 0x5
[77251.788729] cache: parent cpu6 should not be sleeping
[77251.788862] CPU6 is up
[77251.788873] smpboot: Booting Node 0 Processor 7 APIC 0x7
[77251.789404] cache: parent cpu7 should not be sleeping
[77251.789544] CPU7 is up
[77251.796061] ACPI: Waking up from system sleep state S4
[77251.846774] PM: noirq restore of devices complete after 15.174 msecs
[77251.847031] PM: early restore of devices complete after 0.229 msecs
[77251.967142] usb usb1: root hub lost power or was reset
[77251.967143] usb usb2: root hub lost power or was reset
[77251.967194] ACPI: EC: event unblocked
[77251.967918] sd 3:0:0:0: [sda] Starting disk
[77252.301055] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[77252.301079] ata2: SATA link down (SStatus 4 SControl 300)
[77252.301098] ata3: SATA link down (SStatus 4 SControl 300)
[77252.303468] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[77252.303582] ata4.00: configured for UDMA/133
[77252.546793] usb 1-7: reset full-speed USB device number 10 using xhci_hcd
[77252.645298] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[77252.675520] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[77252.678302] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[77252.678312] PM: Device 1-7 failed to restore async: error -32
[77253.181819] PM: restore of devices complete after 1214.760 msecs
[77253.182131] usb 1-10:1.0: rebind failed: -517
[77253.182133] usb 1-10:1.1: rebind failed: -517
[77253.182342] acpi LNXPOWER:16: Turning OFF
[77253.182383] acpi LNXPOWER:15: Turning OFF
[77253.182423] acpi LNXPOWER:14: Turning OFF
[77253.182464] acpi LNXPOWER:13: Turning OFF
[77253.182504] acpi LNXPOWER:12: Turning OFF
[77253.182542] acpi LNXPOWER:11: Turning OFF
[77253.182581] acpi LNXPOWER:10: Turning OFF
[77253.182622] acpi LNXPOWER:0f: Turning OFF
[77253.182661] acpi LNXPOWER:0e: Turning OFF
[77253.182700] acpi LNXPOWER:0d: Turning OFF
[77253.182740] acpi LNXPOWER:0c: Turning OFF
[77253.182780] acpi LNXPOWER:0b: Turning OFF
[77253.182819] acpi LNXPOWER:0a: Turning OFF
[77253.182858] acpi LNXPOWER:09: Turning OFF
[77253.182897] acpi LNXPOWER:08: Turning OFF
[77253.182937] acpi LNXPOWER:07: Turning OFF
[77253.182976] acpi LNXPOWER:06: Turning OFF
[77253.183015] acpi LNXPOWER:05: Turning OFF
[77253.183054] acpi LNXPOWER:04: Turning OFF
[77253.183093] acpi LNXPOWER:03: Turning OFF
[77253.183123] PM: Image restored successfully.
[77253.183146] PM: Basic memory bitmaps freed
[77253.183148] OOM killer enabled.
[77253.183149] Restarting tasks ...
[77253.183222] usb 1-7: USB disconnect, device number 10
[77253.184499] done.
[77253.190677] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[77253.190679] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[77253.218821] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[77253.233768] video LNXVIDEO:01: Restoring backlight state
[77253.353475] usb 1-7: new full-speed USB device number 11 using xhci_hcd
[77253.497717] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[77253.498058] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[77253.498654] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77253.600182] usb 1-8: new full-speed USB device number 12 using xhci_hcd
[77253.731763] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1532:0054.0008/input/input19
[77253.731815] hid-generic 0003:1532:0054.0008: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-8/input0
[77254.197655] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[77254.247215] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77255.024352] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[77255.078528] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77255.181942] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77260.051751] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[77264.932066] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[77264.969593] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[77264.971125] wlp2s0: authenticated
[77264.976724] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[77264.979370] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[77264.981615] wlp2s0: associated
[77264.981637] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[77265.007160] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[77500.630161] usb 1-2: new high-speed USB device number 13 using xhci_hcd
[77500.760909] hub 1-2:1.0: USB hub found
[77500.760936] hub 1-2:1.0: 3 ports detected
[77501.056816] usb 1-2.1: new full-speed USB device number 14 using xhci_hcd
[77501.176833] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0009/input/input20
[77501.233889] hid-generic 0003:0853:0100.0009: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[79212.806686] perf: interrupt took too long (3140 > 3135), lowering kernel.perf_event_max_sample_rate to 63600
[107579.565373] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[107584.685371] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[107585.815974] wlp2s0: authenticate with 24:de:c6:52:ca:58
[107585.856778] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[107585.923395] wlp2s0: authenticated
[107585.925279] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[107585.928285] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[107585.930549] wlp2s0: associated
[107585.935434] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:ca:58
[107628.498824] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[107628.507632] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[107628.544353] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[107628.545931] wlp2s0: authenticated
[107628.551882] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[107628.554632] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[107628.556773] wlp2s0: associated
[107628.630441] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[137807.400482] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[137812.520421] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[137813.653134] wlp2s0: authenticate with 24:de:c6:52:ca:58
[137813.694051] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[137813.695607] wlp2s0: authenticated
[137813.697120] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[137813.700193] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[137813.702487] wlp2s0: associated
[137813.709637] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:ca:58
[137850.745035] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[137850.754136] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[137850.791501] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[137850.793071] wlp2s0: authenticated
[137850.797079] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[137850.799964] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[137850.802110] wlp2s0: associated
[137850.842729] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[150590.065180] usb 1-4: new full-speed USB device number 15 using xhci_hcd
[150590.199178] hid-generic 0003:05AC:1392.000A: hiddev0,hidraw2: USB HID v1.11 Device [Apple Inc. Apple Watch Magnetic Charging Cable] on usb-0000:00:14.0-4/input0
[154297.652721] usb 1-4: USB disconnect, device number 15
[162565.483572] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[162565.501955] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162565.595042] PM: Hibernation mode set to 'platform'
[162566.522889] PM: Syncing filesystems ...
[162567.026088] PM: done.
[162567.026090] Freezing user space processes ... (elapsed 0.001 seconds) done.
[162567.027674] OOM killer disabled.
[162567.027889] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[162567.027890] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[162567.027891] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[162567.027894] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[162567.027895] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[162567.028006] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[162567.029343] PM: Basic memory bitmaps created
[162567.029629] PM: Preallocating image memory... done (allocated 1354189 pages)
[162568.117219] PM: Allocated 5416756 kbytes in 1.08 seconds (5015.51 MB/s)
[162568.117220] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[162568.118629] Suspending console(s) (use no_console_suspend to debug)
[162568.477371] PM: freeze of devices complete after 358.739 msecs
[162568.477807] PM: late freeze of devices complete after 0.434 msecs
[162568.493192] PM: noirq freeze of devices complete after 15.384 msecs
[162568.493447] ACPI: Preparing to enter system sleep state S4
[162568.573247] ACPI: EC: event blocked
[162568.573247] ACPI: EC: EC stopped
[162568.573248] PM: Saving platform NVS memory
[162568.576294] Disabling non-boot CPUs ...
[162568.601183] smpboot: CPU 1 is now offline
[162568.621173] smpboot: CPU 2 is now offline
[162568.651237] smpboot: CPU 3 is now offline
[162568.688757] smpboot: CPU 4 is now offline
[162568.717795] smpboot: CPU 5 is now offline
[162568.747774] smpboot: CPU 6 is now offline
[162568.774423] smpboot: CPU 7 is now offline
[162568.775978] PM: Creating hibernation image:
[162568.914015] PM: Need to copy 1356590 pages
[162568.914017] PM: Normal pages needed: 1356590 + 1024, available pages: 2827063
[162568.776686] PM: Restoring platform NVS memory
[162568.777156] ACPI: EC: EC started
[162568.777862] Suspended for 1661.005 seconds
[162568.777891] Enabling non-boot CPUs ...
[162568.777921] x86: Booting SMP configuration:
[162568.777921] smpboot: Booting Node 0 Processor 1 APIC 0x2
[162568.778438] cache: parent cpu1 should not be sleeping
[162568.778537] CPU1 is up
[162568.778549] smpboot: Booting Node 0 Processor 2 APIC 0x4
[162568.779062] cache: parent cpu2 should not be sleeping
[162568.779167] CPU2 is up
[162568.779180] smpboot: Booting Node 0 Processor 3 APIC 0x6
[162568.779692] cache: parent cpu3 should not be sleeping
[162568.779803] CPU3 is up
[162568.779815] smpboot: Booting Node 0 Processor 4 APIC 0x1
[162568.780434] cache: parent cpu4 should not be sleeping
[162568.780557] CPU4 is up
[162568.780571] smpboot: Booting Node 0 Processor 5 APIC 0x3
[162568.781092] cache: parent cpu5 should not be sleeping
[162568.781220] CPU5 is up
[162568.781231] smpboot: Booting Node 0 Processor 6 APIC 0x5
[162568.781751] cache: parent cpu6 should not be sleeping
[162568.781884] CPU6 is up
[162568.781895] smpboot: Booting Node 0 Processor 7 APIC 0x7
[162568.782418] cache: parent cpu7 should not be sleeping
[162568.782560] CPU7 is up
[162568.789163] ACPI: Waking up from system sleep state S4
[162568.839612] PM: noirq restore of devices complete after 15.174 msecs
[162568.839905] PM: early restore of devices complete after 0.266 msecs
[162568.951996] usb usb1: root hub lost power or was reset
[162568.951997] usb usb2: root hub lost power or was reset
[162568.952031] ACPI: EC: event unblocked
[162568.961555] sd 3:0:0:0: [sda] Starting disk
[162569.287466] ata3: SATA link down (SStatus 4 SControl 300)
[162569.287486] ata2: SATA link down (SStatus 4 SControl 300)
[162569.289589] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[162569.290471] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[162569.292932] ata4.00: configured for UDMA/133
[162569.533011] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[162569.620346] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[162569.649638] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[162569.776427] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[162570.019751] usb 1-7: reset full-speed USB device number 11 using xhci_hcd
[162570.151038] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[162570.151043] PM: Device 1-7 failed to restore async: error -32
[162570.239748] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[162570.354198] PM: restore of devices complete after 1402.269 msecs
[162570.354635] usb 1-10:1.0: rebind failed: -517
[162570.354638] usb 1-10:1.1: rebind failed: -517
[162570.355116] acpi LNXPOWER:16: Turning OFF
[162570.355232] acpi LNXPOWER:15: Turning OFF
[162570.355343] acpi LNXPOWER:14: Turning OFF
[162570.355454] acpi LNXPOWER:13: Turning OFF
[162570.355564] acpi LNXPOWER:12: Turning OFF
[162570.355673] acpi LNXPOWER:11: Turning OFF
[162570.355782] acpi LNXPOWER:10: Turning OFF
[162570.355892] acpi LNXPOWER:0f: Turning OFF
[162570.356003] acpi LNXPOWER:0e: Turning OFF
[162570.356113] acpi LNXPOWER:0d: Turning OFF
[162570.356249] acpi LNXPOWER:0c: Turning OFF
[162570.356370] acpi LNXPOWER:0b: Turning OFF
[162570.356480] acpi LNXPOWER:0a: Turning OFF
[162570.356590] acpi LNXPOWER:09: Turning OFF
[162570.356700] acpi LNXPOWER:08: Turning OFF
[162570.356810] acpi LNXPOWER:07: Turning OFF
[162570.356919] acpi LNXPOWER:06: Turning OFF
[162570.357028] acpi LNXPOWER:05: Turning OFF
[162570.357137] acpi LNXPOWER:04: Turning OFF
[162570.357246] acpi LNXPOWER:03: Turning OFF
[162570.357328] PM: Image restored successfully.
[162570.357393] PM: Basic memory bitmaps freed
[162570.357398] OOM killer enabled.
[162570.357399] Restarting tasks ...
[162570.357491] usb 1-7: USB disconnect, device number 11
[162570.363815] done.
[162570.419675] video LNXVIDEO:01: Restoring backlight state
[162570.526388] usb 1-7: new full-speed USB device number 16 using xhci_hcd
[162570.751019] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[162570.751498] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[162570.752409] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162571.453571] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[162571.504654] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162572.286455] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[162572.333184] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162572.393344] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162577.266622] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[162582.133238] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[162582.170186] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[162582.172257] wlp2s0: authenticated
[162582.179565] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[162582.182270] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[162582.184619] wlp2s0: associated
[162582.184650] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[162582.212569] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[165376.544903] perf: interrupt took too long (3929 > 3925), lowering kernel.perf_event_max_sample_rate to 50700
[166295.176111] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[166295.196491] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166295.234287] PM: Hibernation mode set to 'platform'
[166296.124337] PM: Syncing filesystems ...
[166296.429225] PM: done.
[166296.429227] Freezing user space processes ... (elapsed 0.001 seconds) done.
[166296.430769] OOM killer disabled.
[166296.430988] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[166296.430989] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[166296.430990] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[166296.430993] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[166296.430994] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[166296.431116] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[166296.432468] PM: Basic memory bitmaps created
[166296.432759] PM: Preallocating image memory... done (allocated 1533153 pages)
[166296.780260] PM: Allocated 6132612 kbytes in 0.34 seconds (18037.09 MB/s)
[166296.780261] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[166296.781620] Suspending console(s) (use no_console_suspend to debug)
[166297.118745] PM: freeze of devices complete after 337.123 msecs
[166297.119138] PM: late freeze of devices complete after 0.391 msecs
[166297.135712] PM: noirq freeze of devices complete after 16.572 msecs
[166297.135967] ACPI: Preparing to enter system sleep state S4
[166297.215758] ACPI: EC: event blocked
[166297.215758] ACPI: EC: EC stopped
[166297.215759] PM: Saving platform NVS memory
[166297.218818] Disabling non-boot CPUs ...
[166297.243697] smpboot: CPU 1 is now offline
[166297.263682] smpboot: CPU 2 is now offline
[166297.293671] smpboot: CPU 3 is now offline
[166297.324198] smpboot: CPU 4 is now offline
[166297.353582] smpboot: CPU 5 is now offline
[166297.383613] smpboot: CPU 6 is now offline
[166297.410230] smpboot: CPU 7 is now offline
[166297.411722] PM: Creating hibernation image:
[166297.541153] PM: Need to copy 1535733 pages
[166297.541154] PM: Normal pages needed: 1535733 + 1024, available pages: 2647927
[166297.412429] PM: Restoring platform NVS memory
[166297.412909] ACPI: EC: EC started
[166297.413614] Suspended for 11575.367 seconds
[166297.413643] Enabling non-boot CPUs ...
[166297.413672] x86: Booting SMP configuration:
[166297.413672] smpboot: Booting Node 0 Processor 1 APIC 0x2
[166297.414186] cache: parent cpu1 should not be sleeping
[166297.414284] CPU1 is up
[166297.414296] smpboot: Booting Node 0 Processor 2 APIC 0x4
[166297.414810] cache: parent cpu2 should not be sleeping
[166297.414915] CPU2 is up
[166297.414927] smpboot: Booting Node 0 Processor 3 APIC 0x6
[166297.415448] cache: parent cpu3 should not be sleeping
[166297.415558] CPU3 is up
[166297.415570] smpboot: Booting Node 0 Processor 4 APIC 0x1
[166297.416178] cache: parent cpu4 should not be sleeping
[166297.416300] CPU4 is up
[166297.416316] smpboot: Booting Node 0 Processor 5 APIC 0x3
[166297.416836] cache: parent cpu5 should not be sleeping
[166297.416963] CPU5 is up
[166297.416975] smpboot: Booting Node 0 Processor 6 APIC 0x5
[166297.417494] cache: parent cpu6 should not be sleeping
[166297.417629] CPU6 is up
[166297.417640] smpboot: Booting Node 0 Processor 7 APIC 0x7
[166297.418163] cache: parent cpu7 should not be sleeping
[166297.418309] CPU7 is up
[166297.424886] ACPI: Waking up from system sleep state S4
[166297.475452] PM: noirq restore of devices complete after 15.174 msecs
[166297.475753] PM: early restore of devices complete after 0.273 msecs
[166297.595568] usb usb1: root hub lost power or was reset
[166297.595568] usb usb2: root hub lost power or was reset
[166297.595613] ACPI: EC: event unblocked
[166297.605415] sd 3:0:0:0: [sda] Starting disk
[166297.932140] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[166297.935806] ata3: SATA link down (SStatus 4 SControl 300)
[166297.936009] ata2: SATA link down (SStatus 4 SControl 300)
[166297.936113] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[166297.938673] ata4.00: configured for UDMA/133
[166298.175568] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[166298.263530] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[166298.292624] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[166298.418910] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[166298.662276] usb 1-7: reset full-speed USB device number 16 using xhci_hcd
[166298.793578] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[166298.793581] PM: Device 1-7 failed to restore async: error -32
[166298.882255] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[166298.996697] PM: restore of devices complete after 1401.190 msecs
[166298.997119] usb 1-10:1.0: rebind failed: -517
[166298.997122] usb 1-10:1.1: rebind failed: -517
[166298.997638] acpi LNXPOWER:16: Turning OFF
[166298.997761] acpi LNXPOWER:15: Turning OFF
[166298.997882] acpi LNXPOWER:14: Turning OFF
[166298.998002] acpi LNXPOWER:13: Turning OFF
[166298.998121] acpi LNXPOWER:12: Turning OFF
[166298.998238] acpi LNXPOWER:11: Turning OFF
[166298.998356] acpi LNXPOWER:10: Turning OFF
[166298.998477] acpi LNXPOWER:0f: Turning OFF
[166298.998596] acpi LNXPOWER:0e: Turning OFF
[166298.998714] acpi LNXPOWER:0d: Turning OFF
[166298.998862] acpi LNXPOWER:0c: Turning OFF
[166298.998982] acpi LNXPOWER:0b: Turning OFF
[166298.999110] acpi LNXPOWER:0a: Turning OFF
[166298.999220] acpi LNXPOWER:09: Turning OFF
[166298.999330] acpi LNXPOWER:08: Turning OFF
[166298.999441] acpi LNXPOWER:07: Turning OFF
[166298.999550] acpi LNXPOWER:06: Turning OFF
[166298.999659] acpi LNXPOWER:05: Turning OFF
[166298.999768] acpi LNXPOWER:04: Turning OFF
[166298.999878] acpi LNXPOWER:03: Turning OFF
[166298.999959] PM: Image restored successfully.
[166299.000028] PM: Basic memory bitmaps freed
[166299.000032] OOM killer enabled.
[166299.000033] Restarting tasks ...
[166299.002350] usb 1-7: USB disconnect, device number 16
[166299.003034] done.
[166299.055609] video LNXVIDEO:01: Restoring backlight state
[166299.118787] usb 1-7: new full-speed USB device number 17 using xhci_hcd
[166299.404087] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[166299.404770] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[166299.406034] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166300.106773] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[166300.156057] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166300.934818] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[166300.988409] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166301.061913] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166305.928823] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[166310.830797] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[166310.867840] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[166310.869479] wlp2s0: authenticated
[166310.875396] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[166310.878293] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[166310.880521] wlp2s0: associated
[166310.880555] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[166310.884077] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[196638.213818] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[196638.223107] wlp2s0: authenticate with 24:de:c6:52:ca:58
[196638.256214] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[196638.257756] wlp2s0: authenticated
[196638.263901] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[196638.266840] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[196638.269073] wlp2s0: associated
[196638.282658] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[196758.061698] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[196758.070919] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[196758.108640] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[196758.110202] wlp2s0: authenticated
[196758.117212] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[196758.120760] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[196758.122763] wlp2s0: associated
[196758.182634] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[204917.985004] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[204917.994093] wlp2s0: authenticate with 24:de:c6:52:ca:58
[204918.027149] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[204918.028727] wlp2s0: authenticated
[204918.029288] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[204918.032519] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[204918.034597] wlp2s0: associated
[204918.096151] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[205038.066328] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[205038.074792] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[205038.112301] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[205038.113862] wlp2s0: authenticated
[205038.115892] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[205038.118591] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[205038.120806] wlp2s0: associated
[205038.192320] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[226878.239333] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:50
[226878.248169] wlp2s0: authenticate with 24:de:c6:52:ca:50
[226878.298378] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[226878.300307] wlp2s0: authenticated
[226878.302421] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[226878.306151] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[226878.308730] wlp2s0: associated
[226878.369717] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[226898.738268] wlp2s0: deauthenticated from 24:de:c6:52:ca:50 (Reason: 3=DEAUTH_LEAVING)
[226899.817731] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[226899.854806] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[226899.855524] wlp2s0: 24:de:c6:52:b9:c8 denied authentication (status 17)
[226900.941496] wlp2s0: authenticate with 24:de:c6:52:ca:58
[226900.974603] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[226900.976195] wlp2s0: authenticated
[226900.979089] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[226900.981841] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[226900.984179] wlp2s0: associated
[226900.994779] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[226998.027363] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[226998.036525] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[226998.074304] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[226998.075907] wlp2s0: authenticated
[226998.082393] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[226998.085100] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[226998.087363] wlp2s0: associated
[226998.131058] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[231393.183111] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[231393.200822] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231393.279064] PM: Hibernation mode set to 'platform'
[231394.224809] PM: Syncing filesystems ...
[231394.542908] PM: done.
[231394.542910] Freezing user space processes ... (elapsed 0.001 seconds) done.
[231394.544531] OOM killer disabled.
[231394.544751] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[231394.544753] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[231394.544754] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[231394.544757] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[231394.544758] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[231394.544869] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[231394.546216] PM: Basic memory bitmaps created
[231394.546501] PM: Preallocating image memory... done (allocated 1337160 pages)
[231396.152177] PM: Allocated 5348640 kbytes in 1.60 seconds (3342.90 MB/s)
[231396.152177] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[231396.153566] Suspending console(s) (use no_console_suspend to debug)
[231396.513898] PM: freeze of devices complete after 360.330 msecs
[231396.514270] PM: late freeze of devices complete after 0.370 msecs
[231396.531766] PM: noirq freeze of devices complete after 17.493 msecs
[231396.532020] ACPI: Preparing to enter system sleep state S4
[231396.611808] ACPI: EC: event blocked
[231396.611808] ACPI: EC: EC stopped
[231396.611809] PM: Saving platform NVS memory
[231396.614697] Disabling non-boot CPUs ...
[231396.639746] smpboot: CPU 1 is now offline
[231396.659752] smpboot: CPU 2 is now offline
[231396.689725] smpboot: CPU 3 is now offline
[231396.726923] smpboot: CPU 4 is now offline
[231396.756310] smpboot: CPU 5 is now offline
[231396.789678] smpboot: CPU 6 is now offline
[231396.816350] smpboot: CPU 7 is now offline
[231396.817899] PM: Creating hibernation image:
[231396.963627] PM: Need to copy 1337968 pages
[231396.963629] PM: Normal pages needed: 1337968 + 1024, available pages: 2845685
[231396.818606] PM: Restoring platform NVS memory
[231396.819089] ACPI: EC: EC started
[231396.819795] Suspended for 14122.000 seconds
[231396.819826] Enabling non-boot CPUs ...
[231396.819858] x86: Booting SMP configuration:
[231396.819858] smpboot: Booting Node 0 Processor 1 APIC 0x2
[231396.820377] cache: parent cpu1 should not be sleeping
[231396.820476] CPU1 is up
[231396.820488] smpboot: Booting Node 0 Processor 2 APIC 0x4
[231396.821006] cache: parent cpu2 should not be sleeping
[231396.821113] CPU2 is up
[231396.821125] smpboot: Booting Node 0 Processor 3 APIC 0x6
[231396.821639] cache: parent cpu3 should not be sleeping
[231396.821752] CPU3 is up
[231396.821764] smpboot: Booting Node 0 Processor 4 APIC 0x1
[231396.822384] cache: parent cpu4 should not be sleeping
[231396.822507] CPU4 is up
[231396.822522] smpboot: Booting Node 0 Processor 5 APIC 0x3
[231396.823044] cache: parent cpu5 should not be sleeping
[231396.823170] CPU5 is up
[231396.823183] smpboot: Booting Node 0 Processor 6 APIC 0x5
[231396.823703] cache: parent cpu6 should not be sleeping
[231396.823844] CPU6 is up
[231396.823855] smpboot: Booting Node 0 Processor 7 APIC 0x7
[231396.824374] cache: parent cpu7 should not be sleeping
[231396.824525] CPU7 is up
[231396.831140] ACPI: Waking up from system sleep state S4
[231396.881513] PM: noirq restore of devices complete after 15.104 msecs
[231396.881828] PM: early restore of devices complete after 0.287 msecs
[231397.003043] usb usb1: root hub lost power or was reset
[231397.003044] usb usb2: root hub lost power or was reset
[231397.003085] ACPI: EC: event unblocked
[231397.013215] sd 3:0:0:0: [sda] Starting disk
[231397.341516] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[231397.345583] ata3: SATA link down (SStatus 4 SControl 300)
[231397.345649] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[231397.345667] ata2: SATA link down (SStatus 4 SControl 300)
[231397.348198] ata4.00: configured for UDMA/133
[231397.588192] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[231397.678147] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[231397.709675] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[231397.831651] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[231398.074999] usb 1-7: reset full-speed USB device number 17 using xhci_hcd
[231398.206517] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[231398.206521] PM: Device 1-7 failed to restore async: error -32
[231398.294964] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[231398.409574] PM: restore of devices complete after 1406.572 msecs
[231398.410029] usb 1-10:1.0: rebind failed: -517
[231398.410033] usb 1-10:1.1: rebind failed: -517
[231398.410541] acpi LNXPOWER:16: Turning OFF
[231398.410664] acpi LNXPOWER:15: Turning OFF
[231398.410783] acpi LNXPOWER:14: Turning OFF
[231398.410902] acpi LNXPOWER:13: Turning OFF
[231398.411020] acpi LNXPOWER:12: Turning OFF
[231398.411137] acpi LNXPOWER:11: Turning OFF
[231398.411253] acpi LNXPOWER:10: Turning OFF
[231398.411373] acpi LNXPOWER:0f: Turning OFF
[231398.411515] acpi LNXPOWER:0e: Turning OFF
[231398.411636] acpi LNXPOWER:0d: Turning OFF
[231398.411755] acpi LNXPOWER:0c: Turning OFF
[231398.411874] acpi LNXPOWER:0b: Turning OFF
[231398.411991] acpi LNXPOWER:0a: Turning OFF
[231398.412108] acpi LNXPOWER:09: Turning OFF
[231398.412225] acpi LNXPOWER:08: Turning OFF
[231398.412343] acpi LNXPOWER:07: Turning OFF
[231398.412459] acpi LNXPOWER:06: Turning OFF
[231398.412576] acpi LNXPOWER:05: Turning OFF
[231398.412692] acpi LNXPOWER:04: Turning OFF
[231398.412809] acpi LNXPOWER:03: Turning OFF
[231398.412896] PM: Image restored successfully.
[231398.412991] PM: Basic memory bitmaps freed
[231398.412997] OOM killer enabled.
[231398.412998] Restarting tasks ...
[231398.413093] usb 1-7: USB disconnect, device number 17
[231398.420443] done.
[231398.471645] video LNXVIDEO:01: Restoring backlight state
[231398.584819] usb 1-7: new full-speed USB device number 18 using xhci_hcd
[231399.086216] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[231399.086699] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[231399.087633] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231399.792260] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[231399.845122] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231400.628598] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[231400.680066] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231401.955429] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231406.831768] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[231411.716279] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[231411.753515] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[231411.755030] wlp2s0: authenticated
[231411.761468] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[231411.764119] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[231411.766302] wlp2s0: associated
[231411.766335] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[231411.800131] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[236125.389479] wlp2s0: deauthenticated from 24:de:c6:52:b9:c8 (Reason: 3=DEAUTH_LEAVING)
[236126.522354] wlp2s0: authenticate with 24:de:c6:52:ca:58
[236126.555607] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[236126.565774] wlp2s0: authenticated
[236126.567421] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[236126.570157] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[236126.572539] wlp2s0: associated
[236126.664649] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[236179.047591] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[236179.056727] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[236179.094679] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[236179.096454] wlp2s0: authenticated
[236179.100699] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[236179.103336] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[236179.105454] wlp2s0: associated
[236179.119194] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[238054.736920] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[238054.754116] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238054.855469] PM: Hibernation mode set to 'platform'
[238055.773930] PM: Syncing filesystems ...
[238056.371217] PM: done.
[238056.371219] Freezing user space processes ... (elapsed 0.001 seconds) done.
[238056.372811] OOM killer disabled.
[238056.373023] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[238056.373024] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[238056.373025] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[238056.373028] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[238056.373029] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[238056.373140] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[238056.374492] PM: Basic memory bitmaps created
[238056.374770] PM: Preallocating image memory... done (allocated 1410337 pages)
[238056.732323] PM: Allocated 5641348 kbytes in 0.35 seconds (16118.13 MB/s)
[238056.732324] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[238056.733668] Suspending console(s) (use no_console_suspend to debug)
[238057.093108] PM: freeze of devices complete after 359.437 msecs
[238057.093588] PM: late freeze of devices complete after 0.478 msecs
[238057.110469] PM: noirq freeze of devices complete after 16.880 msecs
[238057.110724] ACPI: Preparing to enter system sleep state S4
[238057.190521] ACPI: EC: event blocked
[238057.190521] ACPI: EC: EC stopped
[238057.190522] PM: Saving platform NVS memory
[238057.193738] Disabling non-boot CPUs ...
[238057.221797] smpboot: CPU 1 is now offline
[238057.241788] smpboot: CPU 2 is now offline
[238057.271796] smpboot: CPU 3 is now offline
[238057.291979] smpboot: CPU 4 is now offline
[238057.321751] smpboot: CPU 5 is now offline
[238057.358382] smpboot: CPU 6 is now offline
[238057.375078] smpboot: CPU 7 is now offline
[238057.376605] PM: Creating hibernation image:
[238057.511948] PM: Need to copy 1411682 pages
[238057.511949] PM: Normal pages needed: 1411682 + 1024, available pages: 2771965
[238057.377315] PM: Restoring platform NVS memory
[238057.377770] ACPI: EC: EC started
[238057.378477] Suspended for 2569.444 seconds
[238057.378505] Enabling non-boot CPUs ...
[238057.378535] x86: Booting SMP configuration:
[238057.378535] smpboot: Booting Node 0 Processor 1 APIC 0x2
[238057.379051] cache: parent cpu1 should not be sleeping
[238057.379152] CPU1 is up
[238057.379165] smpboot: Booting Node 0 Processor 2 APIC 0x4
[238057.379677] cache: parent cpu2 should not be sleeping
[238057.379785] CPU2 is up
[238057.379797] smpboot: Booting Node 0 Processor 3 APIC 0x6
[238057.380309] cache: parent cpu3 should not be sleeping
[238057.380423] CPU3 is up
[238057.380435] smpboot: Booting Node 0 Processor 4 APIC 0x1
[238057.381039] cache: parent cpu4 should not be sleeping
[238057.381160] CPU4 is up
[238057.381174] smpboot: Booting Node 0 Processor 5 APIC 0x3
[238057.381698] cache: parent cpu5 should not be sleeping
[238057.381824] CPU5 is up
[238057.381836] smpboot: Booting Node 0 Processor 6 APIC 0x5
[238057.382358] cache: parent cpu6 should not be sleeping
[238057.382495] CPU6 is up
[238057.382506] smpboot: Booting Node 0 Processor 7 APIC 0x7
[238057.383035] cache: parent cpu7 should not be sleeping
[238057.383178] CPU7 is up
[238057.389757] ACPI: Waking up from system sleep state S4
[238057.440195] PM: noirq restore of devices complete after 15.175 msecs
[238057.440466] PM: early restore of devices complete after 0.244 msecs
[238057.556514] usb usb1: root hub lost power or was reset
[238057.556515] usb usb2: root hub lost power or was reset
[238057.556549] ACPI: EC: event unblocked
[238057.565266] sd 3:0:0:0: [sda] Starting disk
[238057.893540] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[238057.897667] ata2: SATA link down (SStatus 4 SControl 300)
[238057.897687] ata3: SATA link down (SStatus 4 SControl 300)
[238057.897837] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[238057.900279] ata4.00: configured for UDMA/133
[238058.136989] usb 1-7: reset full-speed USB device number 18 using xhci_hcd
[238058.224604] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[238058.253595] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[238058.268673] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[238058.268684] PM: Device 1-7 failed to restore async: error -32
[238058.380358] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[238058.623653] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[238058.843673] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[238058.958123] PM: restore of devices complete after 1401.675 msecs
[238058.958574] usb 1-10:1.0: rebind failed: -517
[238058.958578] usb 1-10:1.1: rebind failed: -517
[238058.959128] acpi LNXPOWER:16: Turning OFF
[238058.959262] acpi LNXPOWER:15: Turning OFF
[238058.959392] acpi LNXPOWER:14: Turning OFF
[238058.959521] acpi LNXPOWER:13: Turning OFF
[238058.959649] acpi LNXPOWER:12: Turning OFF
[238058.959775] acpi LNXPOWER:11: Turning OFF
[238058.959901] acpi LNXPOWER:10: Turning OFF
[238058.960031] acpi LNXPOWER:0f: Turning OFF
[238058.960186] acpi LNXPOWER:0e: Turning OFF
[238058.960319] acpi LNXPOWER:0d: Turning OFF
[238058.960449] acpi LNXPOWER:0c: Turning OFF
[238058.960578] acpi LNXPOWER:0b: Turning OFF
[238058.960705] acpi LNXPOWER:0a: Turning OFF
[238058.960834] acpi LNXPOWER:09: Turning OFF
[238058.960962] acpi LNXPOWER:08: Turning OFF
[238058.961099] acpi LNXPOWER:07: Turning OFF
[238058.961215] acpi LNXPOWER:06: Turning OFF
[238058.961333] acpi LNXPOWER:05: Turning OFF
[238058.961449] acpi LNXPOWER:04: Turning OFF
[238058.961566] acpi LNXPOWER:03: Turning OFF
[238058.961653] PM: Image restored successfully.
[238058.961724] PM: Basic memory bitmaps freed
[238058.961729] OOM killer enabled.
[238058.961730] Restarting tasks ...
[238058.961826] usb 1-7: USB disconnect, device number 18
[238058.968081] done.
[238059.017010] video LNXVIDEO:01: Restoring backlight state
[238059.130159] usb 1-7: new full-speed USB device number 19 using xhci_hcd
[238059.318759] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[238059.319365] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[238059.320685] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238060.020956] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[238060.070328] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238060.845766] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[238060.891822] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238060.952694] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238065.818866] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[238070.697489] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[238070.735185] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[238070.736740] wlp2s0: authenticated
[238070.743475] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[238070.746356] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[238070.748658] wlp2s0: associated
[238070.748692] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[238070.792527] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[243457.951176] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[243457.965790] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243458.012574] PM: Hibernation mode set to 'platform'
[243458.922717] PM: Syncing filesystems ...
[243459.511138] PM: done.
[243459.511142] Freezing user space processes ... (elapsed 0.001 seconds) done.
[243459.512767] OOM killer disabled.
[243459.513014] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[243459.513016] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[243459.513018] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[243459.513022] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[243459.513023] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[243459.513177] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[243459.514782] PM: Basic memory bitmaps created
[243459.515089] PM: Preallocating image memory... done (allocated 1487992 pages)
[243459.876292] PM: Allocated 5951968 kbytes in 0.36 seconds (16533.24 MB/s)
[243459.876292] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[243459.877798] Suspending console(s) (use no_console_suspend to debug)
[243460.233924] PM: freeze of devices complete after 356.123 msecs
[243460.234412] PM: late freeze of devices complete after 0.487 msecs
[243460.249355] PM: noirq freeze of devices complete after 14.941 msecs
[243460.249610] ACPI: Preparing to enter system sleep state S4
[243460.329409] ACPI: EC: event blocked
[243460.329409] ACPI: EC: EC stopped
[243460.329410] PM: Saving platform NVS memory
[243460.332599] Disabling non-boot CPUs ...
[243460.360702] smpboot: CPU 1 is now offline
[243460.380682] smpboot: CPU 2 is now offline
[243460.410769] smpboot: CPU 3 is now offline
[243460.447845] smpboot: CPU 4 is now offline
[243460.477253] smpboot: CPU 5 is now offline
[243460.507322] smpboot: CPU 6 is now offline
[243460.533883] smpboot: CPU 7 is now offline
[243460.535386] PM: Creating hibernation image:
[243460.667814] PM: Need to copy 1489053 pages
[243460.667816] PM: Normal pages needed: 1489053 + 1024, available pages: 2694597
[243460.536089] PM: Restoring platform NVS memory
[243460.536542] ACPI: EC: EC started
[243460.537247] Suspended for 6939.843 seconds
[243460.537279] Enabling non-boot CPUs ...
[243460.537311] x86: Booting SMP configuration:
[243460.537311] smpboot: Booting Node 0 Processor 1 APIC 0x2
[243460.537824] cache: parent cpu1 should not be sleeping
[243460.537923] CPU1 is up
[243460.537935] smpboot: Booting Node 0 Processor 2 APIC 0x4
[243460.538447] cache: parent cpu2 should not be sleeping
[243460.538552] CPU2 is up
[243460.538565] smpboot: Booting Node 0 Processor 3 APIC 0x6
[243460.539091] cache: parent cpu3 should not be sleeping
[243460.539203] CPU3 is up
[243460.539216] smpboot: Booting Node 0 Processor 4 APIC 0x1
[243460.539826] cache: parent cpu4 should not be sleeping
[243460.539948] CPU4 is up
[243460.539961] smpboot: Booting Node 0 Processor 5 APIC 0x3
[243460.540502] cache: parent cpu5 should not be sleeping
[243460.540629] CPU5 is up
[243460.540641] smpboot: Booting Node 0 Processor 6 APIC 0x5
[243460.541160] cache: parent cpu6 should not be sleeping
[243460.541299] CPU6 is up
[243460.541311] smpboot: Booting Node 0 Processor 7 APIC 0x7
[243460.541837] cache: parent cpu7 should not be sleeping
[243460.541990] CPU7 is up
[243460.548586] ACPI: Waking up from system sleep state S4
[243460.599074] PM: noirq restore of devices complete after 15.175 msecs
[243460.599377] PM: early restore of devices complete after 0.251 msecs
[243460.721478] usb usb1: root hub lost power or was reset
[243460.721479] usb usb2: root hub lost power or was reset
[243460.721531] ACPI: EC: event unblocked
[243460.730284] sd 3:0:0:0: [sda] Starting disk
[243461.059080] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[243461.062752] ata2: SATA link down (SStatus 4 SControl 300)
[243461.063121] ata3: SATA link down (SStatus 4 SControl 300)
[243461.063147] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[243461.065630] ata4.00: configured for UDMA/133
[243461.302454] usb 1-7: reset full-speed USB device number 19 using xhci_hcd
[243461.390591] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[243461.419721] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[243461.434424] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[243461.434432] PM: Device 1-7 failed to restore async: error -32
[243461.545869] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[243461.789229] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[243462.009212] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[243462.123615] PM: restore of devices complete after 1402.187 msecs
[243462.124047] usb 1-10:1.0: rebind failed: -517
[243462.124051] usb 1-10:1.1: rebind failed: -517
[243462.124529] acpi LNXPOWER:16: Turning OFF
[243462.124644] acpi LNXPOWER:15: Turning OFF
[243462.124754] acpi LNXPOWER:14: Turning OFF
[243462.124865] acpi LNXPOWER:13: Turning OFF
[243462.124974] acpi LNXPOWER:12: Turning OFF
[243462.125082] acpi LNXPOWER:11: Turning OFF
[243462.125191] acpi LNXPOWER:10: Turning OFF
[243462.125302] acpi LNXPOWER:0f: Turning OFF
[243462.125411] acpi LNXPOWER:0e: Turning OFF
[243462.125520] acpi LNXPOWER:0d: Turning OFF
[243462.125632] acpi LNXPOWER:0c: Turning OFF
[243462.125768] acpi LNXPOWER:0b: Turning OFF
[243462.125879] acpi LNXPOWER:0a: Turning OFF
[243462.125988] acpi LNXPOWER:09: Turning OFF
[243462.126097] acpi LNXPOWER:08: Turning OFF
[243462.126205] acpi LNXPOWER:07: Turning OFF
[243462.126314] acpi LNXPOWER:06: Turning OFF
[243462.126422] acpi LNXPOWER:05: Turning OFF
[243462.126530] acpi LNXPOWER:04: Turning OFF
[243462.126639] acpi LNXPOWER:03: Turning OFF
[243462.126719] PM: Image restored successfully.
[243462.126783] PM: Basic memory bitmaps freed
[243462.126788] OOM killer enabled.
[243462.126789] Restarting tasks ...
[243462.126881] usb 1-7: USB disconnect, device number 19
[243462.132715] done.
[243462.189239] video LNXVIDEO:01: Restoring backlight state
[243462.299059] usb 1-7: new full-speed USB device number 20 using xhci_hcd
[243462.496971] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[243462.497445] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[243462.498393] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243463.200049] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[243463.250717] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243464.030397] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[243464.082026] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243464.156964] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243469.022966] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[243473.910262] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[243473.947575] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[243473.949254] wlp2s0: authenticated
[243473.955701] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[243473.958355] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[243473.960569] wlp2s0: associated
[243473.960602] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[243473.993283] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[256761.012965] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[256761.022364] wlp2s0: authenticate with 24:de:c6:52:ca:58
[256761.055546] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[256761.057188] wlp2s0: authenticated
[256761.060440] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[256761.063430] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[256761.065450] wlp2s0: associated
[256761.102698] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[256881.084783] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[256881.093846] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[256881.131274] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[256881.133471] wlp2s0: authenticated
[256881.136883] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[256881.139689] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[256881.141611] wlp2s0: associated
[256881.219171] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[273781.154217] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[273786.274296] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[273787.441698] wlp2s0: authenticate with 24:de:c6:52:ca:58
[273787.475030] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[273787.478919] wlp2s0: authenticated
[273787.480860] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[273787.483547] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[273787.485843] wlp2s0: associated
[273787.581341] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[273801.065505] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[273801.075043] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[273801.112744] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[273801.114396] wlp2s0: authenticated
[273801.120856] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[273801.123563] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[273801.125762] wlp2s0: associated
[273801.180754] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[275601.029665] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[275601.037971] wlp2s0: authenticate with 24:de:c6:52:ca:58
[275601.070976] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[275601.072540] wlp2s0: authenticated
[275601.077238] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[275601.079934] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[275601.082115] wlp2s0: associated
[275601.142206] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[275721.125668] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[275721.134830] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[275721.172428] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[275721.174010] wlp2s0: authenticated
[275721.177211] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[275721.180351] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[275721.182186] wlp2s0: associated
[275721.238939] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[284960.982500] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[284960.992158] wlp2s0: authenticate with 24:de:c6:52:ca:58
[284961.026359] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[284961.028266] wlp2s0: authenticated
[284961.029146] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[284961.031912] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[284961.034077] wlp2s0: associated
[284961.102755] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[285081.099224] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[285081.108419] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[285081.146042] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[285081.148384] wlp2s0: authenticated
[285081.149049] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[285081.151697] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[285081.153866] wlp2s0: associated
[285081.189246] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[293363.491147] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[293363.508323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293363.549372] PM: Hibernation mode set to 'platform'
[293364.437482] PM: Syncing filesystems ...
[293365.111466] PM: done.
[293365.111469] Freezing user space processes ... (elapsed 0.001 seconds) done.
[293365.113298] OOM killer disabled.
[293365.113581] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[293365.113583] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[293365.113584] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[293365.113588] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[293365.113590] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[293365.113764] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[293365.115426] PM: Basic memory bitmaps created
[293365.115756] PM: Preallocating image memory... done (allocated 1634284 pages)
[293365.755754] PM: Allocated 6537136 kbytes in 0.63 seconds (10376.40 MB/s)
[293365.755755] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[293365.757172] Suspending console(s) (use no_console_suspend to debug)
[293366.102747] PM: freeze of devices complete after 345.573 msecs
[293366.103253] PM: late freeze of devices complete after 0.504 msecs
[293366.117801] PM: noirq freeze of devices complete after 14.546 msecs
[293366.118055] ACPI: Preparing to enter system sleep state S4
[293366.197853] ACPI: EC: event blocked
[293366.197854] ACPI: EC: EC stopped
[293366.197855] PM: Saving platform NVS memory
[293366.201039] Disabling non-boot CPUs ...
[293366.229133] smpboot: CPU 1 is now offline
[293366.249114] smpboot: CPU 2 is now offline
[293366.279096] smpboot: CPU 3 is now offline
[293366.309630] smpboot: CPU 4 is now offline
[293366.339024] smpboot: CPU 5 is now offline
[293366.369092] smpboot: CPU 6 is now offline
[293366.395661] smpboot: CPU 7 is now offline
[293366.397155] PM: Creating hibernation image:
[293366.524151] PM: Need to copy 1635570 pages
[293366.524152] PM: Normal pages needed: 1635570 + 1024, available pages: 2548076
[293366.397863] PM: Restoring platform NVS memory
[293366.398328] ACPI: EC: EC started
[293366.399034] Suspended for 35268.138 seconds
[293366.399065] Enabling non-boot CPUs ...
[293366.399097] x86: Booting SMP configuration:
[293366.399098] smpboot: Booting Node 0 Processor 1 APIC 0x2
[293366.399613] cache: parent cpu1 should not be sleeping
[293366.399715] CPU1 is up
[293366.399726] smpboot: Booting Node 0 Processor 2 APIC 0x4
[293366.400240] cache: parent cpu2 should not be sleeping
[293366.400347] CPU2 is up
[293366.400359] smpboot: Booting Node 0 Processor 3 APIC 0x6
[293366.400884] cache: parent cpu3 should not be sleeping
[293366.400994] CPU3 is up
[293366.401007] smpboot: Booting Node 0 Processor 4 APIC 0x1
[293366.401620] cache: parent cpu4 should not be sleeping
[293366.401744] CPU4 is up
[293366.401758] smpboot: Booting Node 0 Processor 5 APIC 0x3
[293366.402279] cache: parent cpu5 should not be sleeping
[293366.402407] CPU5 is up
[293366.402419] smpboot: Booting Node 0 Processor 6 APIC 0x5
[293366.402939] cache: parent cpu6 should not be sleeping
[293366.403077] CPU6 is up
[293366.403088] smpboot: Booting Node 0 Processor 7 APIC 0x7
[293366.403629] cache: parent cpu7 should not be sleeping
[293366.403770] CPU7 is up
[293366.410376] ACPI: Waking up from system sleep state S4
[293366.460866] PM: noirq restore of devices complete after 15.171 msecs
[293366.461155] PM: early restore of devices complete after 0.261 msecs
[293366.592997] usb usb1: root hub lost power or was reset
[293366.593000] usb usb2: root hub lost power or was reset
[293366.593039] ACPI: EC: event unblocked
[293366.602498] sd 3:0:0:0: [sda] Starting disk
[293366.930877] usb 1-2: reset high-speed USB device number 13 using xhci_hcd
[293366.934890] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[293366.935265] ata3: SATA link down (SStatus 4 SControl 300)
[293366.935286] ata2: SATA link down (SStatus 4 SControl 300)
[293366.937429] ata4.00: configured for UDMA/133
[293367.174261] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[293367.263209] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[293367.292295] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[293367.417690] usb 1-7: reset full-speed USB device number 20 using xhci_hcd
[293367.549734] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[293367.549743] PM: Device 1-7 failed to restore async: error -32
[293367.661028] usb 1-8: reset full-speed USB device number 12 using xhci_hcd
[293367.880990] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[293367.995534] PM: restore of devices complete after 1402.598 msecs
[293367.995992] usb 1-10:1.0: rebind failed: -517
[293367.995995] usb 1-10:1.1: rebind failed: -517
[293367.996509] acpi LNXPOWER:16: Turning OFF
[293367.996633] acpi LNXPOWER:15: Turning OFF
[293367.996753] acpi LNXPOWER:14: Turning OFF
[293367.996873] acpi LNXPOWER:13: Turning OFF
[293367.996992] acpi LNXPOWER:12: Turning OFF
[293367.997109] acpi LNXPOWER:11: Turning OFF
[293367.997225] acpi LNXPOWER:10: Turning OFF
[293367.997345] acpi LNXPOWER:0f: Turning OFF
[293367.997464] acpi LNXPOWER:0e: Turning OFF
[293367.997606] acpi LNXPOWER:0d: Turning OFF
[293367.997735] acpi LNXPOWER:0c: Turning OFF
[293367.997845] acpi LNXPOWER:0b: Turning OFF
[293367.997955] acpi LNXPOWER:0a: Turning OFF
[293367.998064] acpi LNXPOWER:09: Turning OFF
[293367.998175] acpi LNXPOWER:08: Turning OFF
[293367.998284] acpi LNXPOWER:07: Turning OFF
[293367.998393] acpi LNXPOWER:06: Turning OFF
[293367.998502] acpi LNXPOWER:05: Turning OFF
[293367.998611] acpi LNXPOWER:04: Turning OFF
[293367.998721] acpi LNXPOWER:03: Turning OFF
[293367.998802] PM: Image restored successfully.
[293367.998869] PM: Basic memory bitmaps freed
[293367.998874] OOM killer enabled.
[293367.998875] Restarting tasks ...
[293367.998970] usb 1-7: USB disconnect, device number 20
[293368.007711] done.
[293368.057638] video LNXVIDEO:01: Restoring backlight state
[293368.114160] usb 1-7: new full-speed USB device number 21 using xhci_hcd
[293368.412732] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[293368.413369] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[293368.414683] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293369.115260] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[293369.166497] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293369.942280] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[293369.996104] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293370.074843] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293374.947952] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[293379.851843] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[293379.888903] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[293379.890464] wlp2s0: authenticated
[293379.897486] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[293379.900129] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[293379.902276] wlp2s0: associated
[293379.902313] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[293379.938493] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[296587.008972] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[296587.017695] wlp2s0: authenticate with 24:de:c6:52:ca:58
[296587.050741] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[296587.052383] wlp2s0: authenticated
[296587.053653] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[296587.056330] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[296587.058333] wlp2s0: associated
[296587.078477] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[296707.060224] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[296707.069061] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[296707.106743] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[296707.108161] wlp2s0: authenticated
[296707.110291] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[296707.115222] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[296707.117520] wlp2s0: associated
[296707.217712] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[343864.196680] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[343864.213164] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[343864.272374] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[343869.160990] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[343869.197964] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[343869.199465] wlp2s0: authenticated
[343869.206108] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[343869.208854] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[343869.211175] wlp2s0: associated
[343869.211212] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[343869.282910] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[367340.269153] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[367340.289744] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[367340.366496] PM: Syncing filesystems ... done.
[367340.719387] PM: Preparing system for sleep (mem)
[367341.655388] Freezing user space processes ... (elapsed 0.001 seconds) done.
[367341.656753] OOM killer disabled.
[367341.656753] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[367341.657838] PM: Suspending system (mem)
[367341.657866] Suspending console(s) (use no_console_suspend to debug)
[367341.658204] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[367341.658396] sd 3:0:0:0: [sda] Stopping disk
[367342.147760] PM: suspend of devices complete after 489.781 msecs
[367342.148306] PM: late suspend of devices complete after 0.543 msecs
[367342.179135] PM: noirq suspend of devices complete after 30.826 msecs
[367342.179693] ACPI: Preparing to enter system sleep state S3
[367342.225817] ACPI: EC: event blocked
[367342.225818] ACPI: EC: EC stopped
[367342.225818] PM: Saving platform NVS memory
[367342.225864] Disabling non-boot CPUs ...
[367342.253773] smpboot: CPU 1 is now offline
[367342.277081] smpboot: CPU 2 is now offline
[367342.307176] smpboot: CPU 3 is now offline
[367342.341213] smpboot: CPU 4 is now offline
[367342.370363] smpboot: CPU 5 is now offline
[367342.390395] smpboot: CPU 6 is now offline
[367342.417025] smpboot: CPU 7 is now offline
[367342.420247] ACPI: Low-level resume complete
[367342.420339] ACPI: EC: EC started
[367342.420339] PM: Restoring platform NVS memory
[367342.421077] Suspended for 7.977 seconds
[367342.421131] Enabling non-boot CPUs ...
[367342.421157] x86: Booting SMP configuration:
[367342.421158] smpboot: Booting Node 0 Processor 1 APIC 0x2
[367342.421765] cache: parent cpu1 should not be sleeping
[367342.421797] intel_pstate: Disabling energy efficiency optimization
[367342.421893] CPU1 is up
[367342.421907] smpboot: Booting Node 0 Processor 2 APIC 0x4
[367342.422424] cache: parent cpu2 should not be sleeping
[367342.422532] CPU2 is up
[367342.422544] smpboot: Booting Node 0 Processor 3 APIC 0x6
[367342.423066] cache: parent cpu3 should not be sleeping
[367342.423182] CPU3 is up
[367342.423194] smpboot: Booting Node 0 Processor 4 APIC 0x1
[367342.423815] cache: parent cpu4 should not be sleeping
[367342.423943] CPU4 is up
[367342.423958] smpboot: Booting Node 0 Processor 5 APIC 0x3
[367342.424488] cache: parent cpu5 should not be sleeping
[367342.424622] CPU5 is up
[367342.424633] smpboot: Booting Node 0 Processor 6 APIC 0x5
[367342.425163] cache: parent cpu6 should not be sleeping
[367342.425307] CPU6 is up
[367342.425319] smpboot: Booting Node 0 Processor 7 APIC 0x7
[367342.425866] cache: parent cpu7 should not be sleeping
[367342.426018] CPU7 is up
[367342.432086] ACPI: Waking up from system sleep state S3
[367342.502970] PM: noirq resume of devices complete after 33.674 msecs
[367342.552913] PM: early resume of devices complete after 49.898 msecs
[367342.553056] ACPI: EC: event unblocked
[367342.553256] sd 3:0:0:0: [sda] Starting disk
[367342.623162] xhci_hcd 0000:00:14.0: port 9 resume PLC timeout
[367342.856222] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[367342.886079] ata2: SATA link down (SStatus 4 SControl 300)
[367342.886104] ata3: SATA link down (SStatus 4 SControl 300)
[367343.099794] usb 1-7: reset full-speed USB device number 21 using xhci_hcd
[367343.220147] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[367343.231222] dpm_run_callback(): usb_dev_resume+0x0/0x20 [usbcore] returns -32
[367343.231224] PM: Device 1-7 failed to resume async: error -32
[367343.248657] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[367343.319723] usb 1-2.1: reset full-speed USB device number 14 using xhci_hcd
[367343.435581] PM: resume of devices complete after 882.664 msecs
[367343.435839] usb 1-10:1.0: rebind failed: -517
[367343.435842] usb 1-10:1.1: rebind failed: -517
[367343.436340] acpi LNXPOWER:16: Turning OFF
[367343.436441] acpi LNXPOWER:15: Turning OFF
[367343.436538] acpi LNXPOWER:14: Turning OFF
[367343.436636] acpi LNXPOWER:13: Turning OFF
[367343.436731] acpi LNXPOWER:12: Turning OFF
[367343.436826] acpi LNXPOWER:11: Turning OFF
[367343.436921] acpi LNXPOWER:10: Turning OFF
[367343.437018] acpi LNXPOWER:0f: Turning OFF
[367343.437115] acpi LNXPOWER:0e: Turning OFF
[367343.437211] acpi LNXPOWER:0d: Turning OFF
[367343.437308] acpi LNXPOWER:0c: Turning OFF
[367343.437404] acpi LNXPOWER:0b: Turning OFF
[367343.437500] acpi LNXPOWER:0a: Turning OFF
[367343.437622] acpi LNXPOWER:09: Turning OFF
[367343.437721] acpi LNXPOWER:08: Turning OFF
[367343.437817] acpi LNXPOWER:07: Turning OFF
[367343.437927] acpi LNXPOWER:06: Turning OFF
[367343.438023] acpi LNXPOWER:05: Turning OFF
[367343.438119] acpi LNXPOWER:04: Turning OFF
[367343.438214] acpi LNXPOWER:03: Turning OFF
[367343.438289] PM: Finishing wakeup.
[367343.438290] OOM killer enabled.
[367343.438291] Restarting tasks ...
[367343.438883] usb 1-7: USB disconnect, device number 21
[367343.441668] done.
[367343.489522] video LNXVIDEO:01: Restoring backlight state
[367343.559421] usb 1-7: new full-speed USB device number 22 using xhci_hcd
[367343.810705] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[367343.811188] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[367343.811992] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[367344.509950] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[367344.529189] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[367344.605449] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[367345.369507] usb 1-2-port1: disabled by hub (EMI?), re-enabling...
[367345.369517] usb 1-2.1: USB disconnect, device number 14
[367345.609447] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[367345.612225] ata4.00: configured for UDMA/133
[367345.682761] usb 1-2.1: new full-speed USB device number 23 using xhci_hcd
[367345.801812] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0012/input/input21
[367345.856436] hid-generic 0003:0853:0100.0012: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[367346.102395] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[367346.102398] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[367346.249743] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[367349.472760] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[367349.510778] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[367349.512308] wlp2s0: authenticated
[367349.512733] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[367349.515743] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[367349.518031] wlp2s0: associated
[367349.518063] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[367349.579935] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[374972.681462] usb 1-2: USB disconnect, device number 13
[374972.681466] usb 1-2.1: USB disconnect, device number 23
[374973.777689] usb 1-8: USB disconnect, device number 12
[375048.339907] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to f0:5c:19:8d:13:d0
[375048.349166] wlp2s0: authenticate with f0:5c:19:8d:13:d0
[375048.382235] wlp2s0: send auth to f0:5c:19:8d:13:d0 (try 1/3)
[375048.382849] wlp2s0: authenticated
[375048.388214] wlp2s0: associate with f0:5c:19:8d:13:d0 (try 1/3)
[375048.389174] wlp2s0: RX AssocResp from f0:5c:19:8d:13:d0 (capab=0x1011 status=0 aid=1)
[375048.391579] wlp2s0: associated
[375048.457407] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f0:5c:19:8d:13:d0
[375104.285263] wlp2s0: disconnect from AP f0:5c:19:8d:13:d0 for new auth to 24:de:c6:52:bf:f8
[375104.292383] wlp2s0: authenticate with 24:de:c6:52:bf:f8
[375104.330160] wlp2s0: send auth to 24:de:c6:52:bf:f8 (try 1/3)
[375104.331782] wlp2s0: authenticated
[375104.334829] wlp2s0: associate with 24:de:c6:52:bf:f8 (try 1/3)
[375104.337509] wlp2s0: RX AssocResp from 24:de:c6:52:bf:f8 (capab=0x1411 status=0 aid=1)
[375104.339723] wlp2s0: associated
[375104.365028] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:bf:f8
[375113.547503] wlp2s0: disconnect from AP 24:de:c6:52:bf:f8 for new auth to 24:de:c6:52:b9:c0
[375113.556759] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[375113.607906] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[375113.711539] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 2/3)
[375113.814903] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 3/3)
[375113.816588] wlp2s0: authenticated
[375113.818215] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[375113.822119] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[375113.824580] wlp2s0: associated
[375113.832772] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[375151.919507] wlp2s0: disconnect from AP 24:de:c6:52:b9:c0 for new auth to 24:de:c6:52:bf:f8
[375151.928734] wlp2s0: authenticate with 24:de:c6:52:bf:f8
[375151.967050] wlp2s0: send auth to 24:de:c6:52:bf:f8 (try 1/3)
[375151.968672] wlp2s0: authenticated
[375151.974800] wlp2s0: associate with 24:de:c6:52:bf:f8 (try 1/3)
[375151.977613] wlp2s0: RX AssocResp from 24:de:c6:52:bf:f8 (capab=0x1411 status=0 aid=1)
[375151.979800] wlp2s0: associated
[375151.982458] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:bf:f8
[376720.094623] wlp2s0: disconnect from AP 24:de:c6:52:bf:f8 for new auth to 24:de:c6:52:b9:c8
[376720.102954] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[376720.140083] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[376720.142182] wlp2s0: authenticated
[376720.151230] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[376720.153939] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[376720.156096] wlp2s0: associated
[376720.175277] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[376750.568017] usb 1-8: new full-speed USB device number 24 using xhci_hcd
[376750.700879] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1532:0054.0013/input/input22
[376750.701197] hid-generic 0003:1532:0054.0013: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-8/input0
[376753.294575] usb 1-2: new high-speed USB device number 25 using xhci_hcd
[376753.425460] hub 1-2:1.0: USB hub found
[376753.425501] hub 1-2:1.0: 3 ports detected
[376753.721377] usb 1-2.1: new full-speed USB device number 26 using xhci_hcd
[376753.840750] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0014/input/input23
[376753.895075] hid-generic 0003:0853:0100.0014: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[380380.359891] systemd: 35 output lines suppressed due to ratelimiting
[397666.581261] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[397671.701358] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[397675.757723] wlp2s0: authenticate with 24:de:c6:52:ca:58
[397675.790740] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[397675.792392] wlp2s0: authenticated
[397675.794551] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[397675.797356] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[397675.799619] wlp2s0: associated
[397675.816975] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[397792.099793] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[397792.109010] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[397792.146840] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[397792.148528] wlp2s0: authenticated
[397792.154524] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[397792.157597] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[397792.159782] wlp2s0: associated
[397792.259954] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[415220.457742] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[415220.471843] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[415220.512320] PM: Syncing filesystems ... done.
[415221.043146] PM: Preparing system for sleep (mem)
[415221.972094] Freezing user space processes ... (elapsed 0.001 seconds) done.
[415221.973536] OOM killer disabled.
[415221.973536] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[415221.974661] PM: Suspending system (mem)
[415221.974688] Suspending console(s) (use no_console_suspend to debug)
[415221.974937] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[415221.993059] sd 3:0:0:0: [sda] Stopping disk
[415222.499237] PM: suspend of devices complete after 524.437 msecs
[415222.499667] PM: late suspend of devices complete after 0.427 msecs
[415222.531893] PM: noirq suspend of devices complete after 32.222 msecs
[415222.532451] ACPI: Preparing to enter system sleep state S3
[415222.578562] ACPI: EC: event blocked
[415222.578563] ACPI: EC: EC stopped
[415222.578563] PM: Saving platform NVS memory
[415222.578608] Disabling non-boot CPUs ...
[415222.606513] smpboot: CPU 1 is now offline
[415222.626495] smpboot: CPU 2 is now offline
[415222.659799] smpboot: CPU 3 is now offline
[415222.680072] smpboot: CPU 4 is now offline
[415222.713046] smpboot: CPU 5 is now offline
[415222.733039] smpboot: CPU 6 is now offline
[415222.759703] smpboot: CPU 7 is now offline
[415222.762682] ACPI: Low-level resume complete
[415222.762775] ACPI: EC: EC started
[415222.762775] PM: Restoring platform NVS memory
[415222.763512] Suspended for 5.658 seconds
[415222.763567] Enabling non-boot CPUs ...
[415222.763593] x86: Booting SMP configuration:
[415222.763594] smpboot: Booting Node 0 Processor 1 APIC 0x2
[415222.764202] cache: parent cpu1 should not be sleeping
[415222.764235] intel_pstate: Disabling energy efficiency optimization
[415222.764330] CPU1 is up
[415222.764342] smpboot: Booting Node 0 Processor 2 APIC 0x4
[415222.764864] cache: parent cpu2 should not be sleeping
[415222.764977] CPU2 is up
[415222.764988] smpboot: Booting Node 0 Processor 3 APIC 0x6
[415222.765508] cache: parent cpu3 should not be sleeping
[415222.765624] CPU3 is up
[415222.765637] smpboot: Booting Node 0 Processor 4 APIC 0x1
[415222.766256] cache: parent cpu4 should not be sleeping
[415222.766383] CPU4 is up
[415222.766398] smpboot: Booting Node 0 Processor 5 APIC 0x3
[415222.766926] cache: parent cpu5 should not be sleeping
[415222.767057] CPU5 is up
[415222.767069] smpboot: Booting Node 0 Processor 6 APIC 0x5
[415222.767617] cache: parent cpu6 should not be sleeping
[415222.767762] CPU6 is up
[415222.767773] smpboot: Booting Node 0 Processor 7 APIC 0x7
[415222.768324] cache: parent cpu7 should not be sleeping
[415222.768478] CPU7 is up
[415222.774524] ACPI: Waking up from system sleep state S3
[415222.842162] PM: noirq resume of devices complete after 30.603 msecs
[415222.892119] PM: early resume of devices complete after 49.890 msecs
[415222.892240] ACPI: EC: event unblocked
[415222.892710] sd 3:0:0:0: [sda] Starting disk
[415222.962419] xhci_hcd 0000:00:14.0: port 9 resume PLC timeout
[415223.192064] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[415223.225460] ata3: SATA link down (SStatus 4 SControl 300)
[415223.225486] ata2: SATA link down (SStatus 4 SControl 300)
[415223.435647] usb 1-7: reset full-speed USB device number 22 using xhci_hcd
[415223.563018] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[415223.567100] dpm_run_callback(): usb_dev_resume+0x0/0x20 [usbcore] returns -32
[415223.567102] PM: Device 1-7 failed to resume async: error -32
[415223.591347] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[415223.655696] usb 1-2.1: reset full-speed USB device number 26 using xhci_hcd
[415223.771746] PM: resume of devices complete after 879.624 msecs
[415223.772060] usb 1-10:1.0: rebind failed: -517
[415223.772063] usb 1-10:1.1: rebind failed: -517
[415223.772554] acpi LNXPOWER:16: Turning OFF
[415223.772654] acpi LNXPOWER:15: Turning OFF
[415223.772752] acpi LNXPOWER:14: Turning OFF
[415223.772850] acpi LNXPOWER:13: Turning OFF
[415223.772946] acpi LNXPOWER:12: Turning OFF
[415223.773041] acpi LNXPOWER:11: Turning OFF
[415223.773137] acpi LNXPOWER:10: Turning OFF
[415223.773234] acpi LNXPOWER:0f: Turning OFF
[415223.773331] acpi LNXPOWER:0e: Turning OFF
[415223.773427] acpi LNXPOWER:0d: Turning OFF
[415223.773525] acpi LNXPOWER:0c: Turning OFF
[415223.774724] acpi LNXPOWER:0b: Turning OFF
[415223.774821] acpi LNXPOWER:0a: Turning OFF
[415223.774918] acpi LNXPOWER:09: Turning OFF
[415223.775015] acpi LNXPOWER:08: Turning OFF
[415223.775111] acpi LNXPOWER:07: Turning OFF
[415223.775206] acpi LNXPOWER:06: Turning OFF
[415223.775314] acpi LNXPOWER:05: Turning OFF
[415223.775409] acpi LNXPOWER:04: Turning OFF
[415223.775505] acpi LNXPOWER:03: Turning OFF
[415223.775582] PM: Finishing wakeup.
[415223.775583] OOM killer enabled.
[415223.775583] Restarting tasks ...
[415223.775661] usb 1-7: USB disconnect, device number 22
[415223.784994] done.
[415223.793136] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[415223.793138] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[415223.820836] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[415223.835356] video LNXVIDEO:01: Restoring backlight state
[415223.888613] usb 1-7: new full-speed USB device number 27 using xhci_hcd
[415224.206628] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[415224.207160] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[415224.208040] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[415224.906087] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[415224.956801] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[415225.018636] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[415225.452539] usb 1-2.1: USB disconnect, device number 26
[415225.792056] usb 1-2.1: new full-speed USB device number 28 using xhci_hcd
[415225.911335] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0016/input/input24
[415225.951982] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[415225.954963] ata4.00: configured for UDMA/133
[415225.965600] hid-generic 0003:0853:0100.0016: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[415229.894065] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[415229.932264] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[415229.933787] wlp2s0: authenticated
[415229.935264] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[415229.937960] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[415229.940361] wlp2s0: associated
[415229.940394] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[415230.023525] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[423187.402926] mmap: chromium (30782): VmData 2147557376 exceed data ulimit 2147483647. Update limits or use boot option ignore_rlimit_data.
[432952.007105] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[432952.016048] wlp2s0: authenticate with 24:de:c6:52:ca:58
[432952.049004] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[432952.050676] wlp2s0: authenticated
[432952.055756] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[432952.058442] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[432952.060600] wlp2s0: associated
[432952.120683] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[433006.039529] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[433006.048756] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[433006.086265] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[433006.087860] wlp2s0: authenticated
[433006.092413] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[433006.095169] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[433006.097368] wlp2s0: associated
[433006.163756] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[435781.216338] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[435781.239592] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435781.318763] PM: Hibernation mode set to 'platform'
[435782.238339] PM: Syncing filesystems ...
[435782.683517] PM: done.
[435782.683520] Freezing user space processes ... (elapsed 0.001 seconds) done.
[435782.685365] OOM killer disabled.
[435782.685657] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[435782.685659] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[435782.685660] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[435782.685664] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[435782.685665] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[435782.685802] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[435782.687405] PM: Basic memory bitmaps created
[435782.687719] PM: Preallocating image memory... done (allocated 1266691 pages)
[435785.558534] PM: Allocated 5066764 kbytes in 2.87 seconds (1765.42 MB/s)
[435785.558534] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[435785.560041] Suspending console(s) (use no_console_suspend to debug)
[435785.914887] PM: freeze of devices complete after 354.844 msecs
[435785.915345] PM: late freeze of devices complete after 0.456 msecs
[435785.932107] PM: noirq freeze of devices complete after 16.759 msecs
[435785.932630] ACPI: Preparing to enter system sleep state S4
[435786.012110] ACPI: EC: event blocked
[435786.012111] ACPI: EC: EC stopped
[435786.012111] PM: Saving platform NVS memory
[435786.015220] Disabling non-boot CPUs ...
[435786.040078] smpboot: CPU 1 is now offline
[435786.060056] smpboot: CPU 2 is now offline
[435786.090021] smpboot: CPU 3 is now offline
[435786.120556] smpboot: CPU 4 is now offline
[435786.149942] smpboot: CPU 5 is now offline
[435786.183275] smpboot: CPU 6 is now offline
[435786.209925] smpboot: CPU 7 is now offline
[435786.211422] PM: Creating hibernation image:
[435786.367715] PM: Need to copy 1266932 pages
[435786.367717] PM: Normal pages needed: 1266932 + 1024, available pages: 2916714
[435786.212127] PM: Restoring platform NVS memory
[435786.212606] ACPI: EC: EC started
[435786.213311] Suspended for 55.552 seconds
[435786.213356] Enabling non-boot CPUs ...
[435786.213382] x86: Booting SMP configuration:
[435786.213382] smpboot: Booting Node 0 Processor 1 APIC 0x2
[435786.213901] cache: parent cpu1 should not be sleeping
[435786.214006] CPU1 is up
[435786.214020] smpboot: Booting Node 0 Processor 2 APIC 0x4
[435786.214535] cache: parent cpu2 should not be sleeping
[435786.214645] CPU2 is up
[435786.214658] smpboot: Booting Node 0 Processor 3 APIC 0x6
[435786.215172] cache: parent cpu3 should not be sleeping
[435786.215286] CPU3 is up
[435786.215298] smpboot: Booting Node 0 Processor 4 APIC 0x1
[435786.215917] cache: parent cpu4 should not be sleeping
[435786.216042] CPU4 is up
[435786.216055] smpboot: Booting Node 0 Processor 5 APIC 0x3
[435786.216581] cache: parent cpu5 should not be sleeping
[435786.216712] CPU5 is up
[435786.216724] smpboot: Booting Node 0 Processor 6 APIC 0x5
[435786.217268] cache: parent cpu6 should not be sleeping
[435786.217411] CPU6 is up
[435786.217423] smpboot: Booting Node 0 Processor 7 APIC 0x7
[435786.217950] cache: parent cpu7 should not be sleeping
[435786.218104] CPU7 is up
[435786.224709] ACPI: Waking up from system sleep state S4
[435786.278461] PM: noirq restore of devices complete after 15.017 msecs
[435786.278813] PM: early restore of devices complete after 0.298 msecs
[435786.393740] usb usb1: root hub lost power or was reset
[435786.393740] usb usb2: root hub lost power or was reset
[435786.393800] ACPI: EC: event unblocked
[435786.402440] sd 3:0:0:0: [sda] Starting disk
[435786.731805] usb 1-2: reset high-speed USB device number 25 using xhci_hcd
[435786.735749] ata2: SATA link down (SStatus 4 SControl 300)
[435786.736167] ata3: SATA link down (SStatus 4 SControl 300)
[435786.736189] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[435786.738740] ata4.00: configured for UDMA/133
[435786.975233] usb 1-8: reset full-speed USB device number 24 using xhci_hcd
[435787.069181] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[435787.100008] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[435787.218571] usb 1-7: reset full-speed USB device number 27 using xhci_hcd
[435787.350608] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[435787.350617] PM: Device 1-7 failed to restore async: error -32
[435787.461954] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[435787.681926] usb 1-2.1: reset full-speed USB device number 28 using xhci_hcd
[435787.798387] PM: restore of devices complete after 1404.693 msecs
[435787.798882] usb 1-10:1.0: rebind failed: -517
[435787.798885] usb 1-10:1.1: rebind failed: -517
[435787.799438] acpi LNXPOWER:16: Turning OFF
[435787.799571] acpi LNXPOWER:15: Turning OFF
[435787.799700] acpi LNXPOWER:14: Turning OFF
[435787.799828] acpi LNXPOWER:13: Turning OFF
[435787.799956] acpi LNXPOWER:12: Turning OFF
[435787.800082] acpi LNXPOWER:11: Turning OFF
[435787.800208] acpi LNXPOWER:10: Turning OFF
[435787.800338] acpi LNXPOWER:0f: Turning OFF
[435787.800465] acpi LNXPOWER:0e: Turning OFF
[435787.800594] acpi LNXPOWER:0d: Turning OFF
[435787.800722] acpi LNXPOWER:0c: Turning OFF
[435787.800850] acpi LNXPOWER:0b: Turning OFF
[435787.800977] acpi LNXPOWER:0a: Turning OFF
[435787.801105] acpi LNXPOWER:09: Turning OFF
[435787.801233] acpi LNXPOWER:08: Turning OFF
[435787.801360] acpi LNXPOWER:07: Turning OFF
[435787.801487] acpi LNXPOWER:06: Turning OFF
[435787.801613] acpi LNXPOWER:05: Turning OFF
[435787.801753] acpi LNXPOWER:04: Turning OFF
[435787.801885] acpi LNXPOWER:03: Turning OFF
[435787.801979] PM: Image restored successfully.
[435787.802055] PM: Basic memory bitmaps freed
[435787.802062] OOM killer enabled.
[435787.802063] Restarting tasks ...
[435787.802163] usb 1-7: USB disconnect, device number 27
[435787.804997] done.
[435787.855208] video LNXVIDEO:01: Restoring backlight state
[435787.921787] usb 1-7: new full-speed USB device number 29 using xhci_hcd
[435787.962058] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[435787.962061] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[435787.989826] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[435788.325658] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435788.326197] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435788.327434] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435789.025782] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[435789.077727] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435789.440957] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435791.738158] usb 1-2.1: USB disconnect, device number 28
[435792.051810] usb 1-2.1: new full-speed USB device number 30 using xhci_hcd
[435792.171286] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0018/input/input25
[435792.225810] hid-generic 0003:0853:0100.0018: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[435794.317128] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[435794.354868] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[435794.356417] wlp2s0: authenticated
[435794.358437] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[435794.361421] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[435794.363728] wlp2s0: associated
[435794.363751] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[435794.409278] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[435866.415935] usb 1-2: USB disconnect, device number 25
[435866.415940] usb 1-2.1: USB disconnect, device number 30
[435869.488520] usb 1-2: new high-speed USB device number 31 using xhci_hcd
[435869.619253] hub 1-2:1.0: USB hub found
[435869.619277] hub 1-2:1.0: 3 ports detected
[435869.915136] usb 1-2.1: new full-speed USB device number 32 using xhci_hcd
[435870.034824] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0019/input/input26
[435870.089129] hid-generic 0003:0853:0100.0019: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[435874.976615] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[435874.992848] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435875.183554] PM: Hibernation mode set to 'platform'
[435876.083705] PM: Syncing filesystems ...
[435876.645341] PM: done.
[435876.645344] Freezing user space processes ... (elapsed 0.001 seconds) done.
[435876.647278] OOM killer disabled.
[435876.647583] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[435876.647585] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[435876.647587] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[435876.647591] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[435876.647593] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[435876.647773] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[435876.649570] PM: Basic memory bitmaps created
[435876.649914] PM: Preallocating image memory... done (allocated 1289814 pages)
[435877.010128] PM: Allocated 5159256 kbytes in 0.36 seconds (14331.26 MB/s)
[435877.010128] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[435877.011534] Suspending console(s) (use no_console_suspend to debug)
[435877.356541] PM: freeze of devices complete after 345.004 msecs
[435877.357030] PM: late freeze of devices complete after 0.487 msecs
[435877.371798] PM: noirq freeze of devices complete after 14.766 msecs
[435877.372052] ACPI: Preparing to enter system sleep state S4
[435877.451855] ACPI: EC: event blocked
[435877.451856] ACPI: EC: EC stopped
[435877.451856] PM: Saving platform NVS memory
[435877.455111] Disabling non-boot CPUs ...
[435877.483118] smpboot: CPU 1 is now offline
[435877.513098] smpboot: CPU 2 is now offline
[435877.543083] smpboot: CPU 3 is now offline
[435877.573629] smpboot: CPU 4 is now offline
[435877.609700] smpboot: CPU 5 is now offline
[435877.639758] smpboot: CPU 6 is now offline
[435877.666346] smpboot: CPU 7 is now offline
[435877.667838] PM: Creating hibernation image:
[435877.816489] PM: Need to copy 1292324 pages
[435877.816491] PM: Normal pages needed: 1292324 + 1024, available pages: 2891316
[435877.668547] PM: Restoring platform NVS memory
[435877.668999] ACPI: EC: EC started
[435877.669704] Suspended for 9499.546 seconds
[435877.669736] Enabling non-boot CPUs ...
[435877.669767] x86: Booting SMP configuration:
[435877.669768] smpboot: Booting Node 0 Processor 1 APIC 0x2
[435877.670305] cache: parent cpu1 should not be sleeping
[435877.670410] CPU1 is up
[435877.670424] smpboot: Booting Node 0 Processor 2 APIC 0x4
[435877.670958] cache: parent cpu2 should not be sleeping
[435877.671070] CPU2 is up
[435877.671082] smpboot: Booting Node 0 Processor 3 APIC 0x6
[435877.671616] cache: parent cpu3 should not be sleeping
[435877.671733] CPU3 is up
[435877.671745] smpboot: Booting Node 0 Processor 4 APIC 0x1
[435877.672371] cache: parent cpu4 should not be sleeping
[435877.672497] CPU4 is up
[435877.672511] smpboot: Booting Node 0 Processor 5 APIC 0x3
[435877.673042] cache: parent cpu5 should not be sleeping
[435877.673173] CPU5 is up
[435877.673185] smpboot: Booting Node 0 Processor 6 APIC 0x5
[435877.673751] cache: parent cpu6 should not be sleeping
[435877.673886] CPU6 is up
[435877.673898] smpboot: Booting Node 0 Processor 7 APIC 0x7
[435877.674444] cache: parent cpu7 should not be sleeping
[435877.674587] CPU7 is up
[435877.681198] ACPI: Waking up from system sleep state S4
[435877.731525] PM: noirq restore of devices complete after 15.166 msecs
[435877.731801] PM: early restore of devices complete after 0.244 msecs
[435877.838952] usb usb1: root hub lost power or was reset
[435877.838953] usb usb2: root hub lost power or was reset
[435877.839024] ACPI: EC: event unblocked
[435877.849089] sd 3:0:0:0: [sda] Starting disk
[435878.181503] usb 1-7: reset full-speed USB device number 29 using xhci_hcd
[435878.182394] ata3: SATA link down (SStatus 4 SControl 300)
[435878.182417] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[435878.182435] ata2: SATA link down (SStatus 4 SControl 300)
[435878.184994] ata4.00: configured for UDMA/133
[435878.313533] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[435878.313541] PM: Device 1-7 failed to restore async: error -32
[435878.424908] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[435878.505523] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[435878.534549] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[435880.733057] PM: restore of devices complete after 2894.183 msecs
[435880.733459] usb 1-10:1.0: rebind failed: -517
[435880.733462] usb 1-10:1.1: rebind failed: -517
[435880.733887] acpi LNXPOWER:16: Turning OFF
[435880.733988] acpi LNXPOWER:15: Turning OFF
[435880.734086] acpi LNXPOWER:14: Turning OFF
[435880.734185] acpi LNXPOWER:13: Turning OFF
[435880.734282] acpi LNXPOWER:12: Turning OFF
[435880.734378] acpi LNXPOWER:11: Turning OFF
[435880.734473] acpi LNXPOWER:10: Turning OFF
[435880.734571] acpi LNXPOWER:0f: Turning OFF
[435880.734667] acpi LNXPOWER:0e: Turning OFF
[435880.734764] acpi LNXPOWER:0d: Turning OFF
[435880.734886] acpi LNXPOWER:0c: Turning OFF
[435880.734984] acpi LNXPOWER:0b: Turning OFF
[435880.735080] acpi LNXPOWER:0a: Turning OFF
[435880.735177] acpi LNXPOWER:09: Turning OFF
[435880.735273] acpi LNXPOWER:08: Turning OFF
[435880.735370] acpi LNXPOWER:07: Turning OFF
[435880.735465] acpi LNXPOWER:06: Turning OFF
[435880.735561] acpi LNXPOWER:05: Turning OFF
[435880.735657] acpi LNXPOWER:04: Turning OFF
[435880.735753] acpi LNXPOWER:03: Turning OFF
[435880.735825] PM: Image restored successfully.
[435880.735882] PM: Basic memory bitmaps freed
[435880.735886] OOM killer enabled.
[435880.735887] Restarting tasks ... done.
[435880.740731] usb 1-2: USB disconnect, device number 31
[435880.740734] usb 1-2.1: USB disconnect, device number 32
[435880.742221] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[435880.742223] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[435880.769956] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[435880.798284] video LNXVIDEO:01: Restoring backlight state
[435880.841878] usb 1-7: USB disconnect, device number 29
[435880.971518] usb 1-7: new full-speed USB device number 33 using xhci_hcd
[435881.099805] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435881.100378] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435881.101706] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435881.109324] usb 1-8: USB disconnect, device number 24
[435881.805744] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[435881.855242] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435882.632623] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[435882.678812] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435882.739837] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435887.628194] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435892.516783] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[435892.553967] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[435892.555932] wlp2s0: authenticated
[435892.564816] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[435892.569383] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[435892.571792] wlp2s0: associated
[435892.571860] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[435892.667976] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[435923.054940] usb 1-2: new high-speed USB device number 34 using xhci_hcd
[435923.185417] hub 1-2:1.0: USB hub found
[435923.185444] hub 1-2:1.0: 3 ports detected
[435923.481545] usb 1-2.1: new full-speed USB device number 35 using xhci_hcd
[435923.601599] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.001B/input/input27
[435923.658864] hid-generic 0003:0853:0100.001B: input,hidraw0: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[435946.472940] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[435946.489800] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435946.567593] PM: Hibernation mode set to 'platform'
[435947.471083] PM: Syncing filesystems ...
[435948.126003] PM: done.
[435948.126007] Freezing user space processes ... (elapsed 0.001 seconds) done.
[435948.127969] OOM killer disabled.
[435948.128261] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[435948.128263] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[435948.128265] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[435948.128269] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[435948.128270] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[435948.128418] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[435948.130139] PM: Basic memory bitmaps created
[435948.130479] PM: Preallocating image memory... done (allocated 1391704 pages)
[435948.492527] PM: Allocated 5566816 kbytes in 0.36 seconds (15463.37 MB/s)
[435948.492527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[435948.493943] Suspending console(s) (use no_console_suspend to debug)
[435948.844472] PM: freeze of devices complete after 350.528 msecs
[435948.844914] PM: late freeze of devices complete after 0.440 msecs
[435948.861533] PM: noirq freeze of devices complete after 16.618 msecs
[435948.861788] ACPI: Preparing to enter system sleep state S4
[435948.941587] ACPI: EC: event blocked
[435948.941588] ACPI: EC: EC stopped
[435948.941589] PM: Saving platform NVS memory
[435948.944839] Disabling non-boot CPUs ...
[435948.972894] smpboot: CPU 1 is now offline
[435948.992864] smpboot: CPU 2 is now offline
[435949.026165] smpboot: CPU 3 is now offline
[435949.046206] smpboot: CPU 4 is now offline
[435949.076092] smpboot: CPU 5 is now offline
[435949.116086] smpboot: CPU 6 is now offline
[435949.142777] smpboot: CPU 7 is now offline
[435949.144345] PM: Creating hibernation image:
[435949.280605] PM: Need to copy 1393554 pages
[435949.280607] PM: Normal pages needed: 1393554 + 1024, available pages: 2790097
[435949.145056] PM: Restoring platform NVS memory
[435949.145535] ACPI: EC: EC started
[435949.146241] Suspended for 2110.526 seconds
[435949.146277] Enabling non-boot CPUs ...
[435949.146309] x86: Booting SMP configuration:
[435949.146310] smpboot: Booting Node 0 Processor 1 APIC 0x2
[435949.146856] cache: parent cpu1 should not be sleeping
[435949.146961] CPU1 is up
[435949.146973] smpboot: Booting Node 0 Processor 2 APIC 0x4
[435949.147518] cache: parent cpu2 should not be sleeping
[435949.147630] CPU2 is up
[435949.147641] smpboot: Booting Node 0 Processor 3 APIC 0x6
[435949.148185] cache: parent cpu3 should not be sleeping
[435949.148301] CPU3 is up
[435949.148313] smpboot: Booting Node 0 Processor 4 APIC 0x1
[435949.148929] cache: parent cpu4 should not be sleeping
[435949.149056] CPU4 is up
[435949.149074] smpboot: Booting Node 0 Processor 5 APIC 0x3
[435949.149610] cache: parent cpu5 should not be sleeping
[435949.149736] CPU5 is up
[435949.149748] smpboot: Booting Node 0 Processor 6 APIC 0x5
[435949.150295] cache: parent cpu6 should not be sleeping
[435949.150435] CPU6 is up
[435949.150446] smpboot: Booting Node 0 Processor 7 APIC 0x7
[435949.151016] cache: parent cpu7 should not be sleeping
[435949.151170] CPU7 is up
[435949.157765] ACPI: Waking up from system sleep state S4
[435949.207977] PM: noirq restore of devices complete after 15.095 msecs
[435949.208294] PM: early restore of devices complete after 0.287 msecs
[435949.333562] usb usb1: root hub lost power or was reset
[435949.333563] usb usb2: root hub lost power or was reset
[435949.333591] ACPI: EC: event unblocked
[435949.333783] sd 3:0:0:0: [sda] Starting disk
[435949.665233] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[435949.665500] ata2: SATA link down (SStatus 4 SControl 300)
[435949.665536] ata3: SATA link down (SStatus 4 SControl 300)
[435949.671312] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[435949.709441] ata4.00: configured for UDMA/133
[435949.918099] usb 1-7: reset full-speed USB device number 33 using xhci_hcd
[435950.000338] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[435950.029196] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[435950.049809] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[435950.049820] PM: Device 1-7 failed to restore async: error -32
[435952.229608] PM: restore of devices complete after 2896.132 msecs
[435952.230076] usb 1-10:1.0: rebind failed: -517
[435952.230079] usb 1-10:1.1: rebind failed: -517
[435952.230608] acpi LNXPOWER:16: Turning OFF
[435952.230724] acpi LNXPOWER:15: Turning OFF
[435952.230836] acpi LNXPOWER:14: Turning OFF
[435952.230948] acpi LNXPOWER:13: Turning OFF
[435952.231058] acpi LNXPOWER:12: Turning OFF
[435952.231168] acpi LNXPOWER:11: Turning OFF
[435952.231296] acpi LNXPOWER:10: Turning OFF
[435952.231411] acpi LNXPOWER:0f: Turning OFF
[435952.231522] acpi LNXPOWER:0e: Turning OFF
[435952.231633] acpi LNXPOWER:0d: Turning OFF
[435952.231744] acpi LNXPOWER:0c: Turning OFF
[435952.231855] acpi LNXPOWER:0b: Turning OFF
[435952.231965] acpi LNXPOWER:0a: Turning OFF
[435952.232076] acpi LNXPOWER:09: Turning OFF
[435952.232186] acpi LNXPOWER:08: Turning OFF
[435952.232296] acpi LNXPOWER:07: Turning OFF
[435952.232405] acpi LNXPOWER:06: Turning OFF
[435952.232514] acpi LNXPOWER:05: Turning OFF
[435952.232623] acpi LNXPOWER:04: Turning OFF
[435952.232733] acpi LNXPOWER:03: Turning OFF
[435952.232814] PM: Image restored successfully.
[435952.232880] PM: Basic memory bitmaps freed
[435952.232885] OOM killer enabled.
[435952.232886] Restarting tasks ...
[435952.232976] usb 1-2: USB disconnect, device number 34
[435952.232980] usb 1-2.1: USB disconnect, device number 35
[435952.234232] done.
[435952.234329] usb 1-7: USB disconnect, device number 33
[435952.238777] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[435952.238779] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[435952.266549] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[435952.284779] video LNXVIDEO:01: Restoring backlight state
[435952.361394] usb 1-7: new full-speed USB device number 36 using xhci_hcd
[435952.542344] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435952.542736] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[435952.543744] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435953.242844] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[435953.293241] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435954.068805] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[435954.123002] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435954.182776] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435959.072135] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[435963.936539] wlp2s0: authenticate with d8:c7:c8:26:7c:28
[435963.973374] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 1/3)
[435963.974643] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 2/3)
[435963.975922] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 3/3)
[435963.977191] wlp2s0: authentication with d8:c7:c8:26:7c:28 timed out
[435968.943773] wlp2s0: authenticate with d8:c7:c8:ae:77:28
[435968.976645] wlp2s0: send auth to d8:c7:c8:ae:77:28 (try 1/3)
[435968.978640] wlp2s0: authenticated
[435968.984585] wlp2s0: associate with d8:c7:c8:ae:77:28 (try 1/3)
[435968.987207] wlp2s0: RX AssocResp from d8:c7:c8:ae:77:28 (capab=0x1411 status=0 aid=4)
[435968.990150] wlp2s0: associated
[435968.990182] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[435969.342312] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:c7:c8:ae:77:28
[436006.412885] wlp2s0: disconnect from AP d8:c7:c8:ae:77:28 for new auth to d8:c7:c8:26:7c:28
[436006.421470] wlp2s0: authenticate with d8:c7:c8:26:7c:28
[436006.458975] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 1/3)
[436006.460950] wlp2s0: authenticated
[436006.467911] wlp2s0: associate with d8:c7:c8:26:7c:28 (try 1/3)
[436006.471210] wlp2s0: RX AssocResp from d8:c7:c8:26:7c:28 (capab=0x1411 status=0 aid=1)
[436006.473193] wlp2s0: associated
[436006.512585] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:c7:c8:26:7c:28
[436014.062312] wlp2s0: deauthenticating from d8:c7:c8:26:7c:28 by local choice (Reason: 3=DEAUTH_LEAVING)
[436018.662600] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436023.527449] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436028.418337] wlp2s0: authenticate with d8:c7:c8:26:7c:28
[436028.454483] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 1/3)
[436028.456090] wlp2s0: authenticated
[436028.461242] wlp2s0: associate with d8:c7:c8:26:7c:28 (try 1/3)
[436028.463486] wlp2s0: associate with d8:c7:c8:26:7c:28 (try 2/3)
[436028.465783] wlp2s0: associate with d8:c7:c8:26:7c:28 (try 3/3)
[436028.468899] wlp2s0: RX AssocResp from d8:c7:c8:26:7c:28 (capab=0x1411 status=0 aid=1)
[436028.471638] wlp2s0: associated
[436028.471664] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[436028.529351] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:c7:c8:26:7c:28
[436054.178462] wlp2s0: disconnect from AP d8:c7:c8:26:7c:28 for new auth to d8:c7:c8:ae:77:28
[436054.187401] wlp2s0: authenticate with d8:c7:c8:ae:77:28
[436054.220537] wlp2s0: send auth to d8:c7:c8:ae:77:28 (try 1/3)
[436054.221792] wlp2s0: send auth to d8:c7:c8:ae:77:28 (try 2/3)
[436054.223155] wlp2s0: send auth to d8:c7:c8:ae:77:28 (try 3/3)
[436054.224485] wlp2s0: authenticated
[436054.281286] wlp2s0: associate with d8:c7:c8:ae:77:28 (try 1/3)
[436054.283866] wlp2s0: associate with d8:c7:c8:ae:77:28 (try 2/3)
[436054.286487] wlp2s0: associate with d8:c7:c8:ae:77:28 (try 3/3)
[436054.289011] wlp2s0: association with d8:c7:c8:ae:77:28 timed out
[436054.626401] wlp2s0: authenticate with d8:c7:c8:26:7c:28
[436054.664030] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 1/3)
[436054.666552] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 2/3)
[436054.670914] wlp2s0: send auth to d8:c7:c8:26:7c:28 (try 3/3)
[436054.672251] wlp2s0: authentication with d8:c7:c8:26:7c:28 timed out
[436054.946306] wlp2s0: authenticate with 6c:f3:7f:85:61:c8
[436054.983952] wlp2s0: send auth to 6c:f3:7f:85:61:c8 (try 1/3)
[436054.988065] wlp2s0: authenticated
[436054.991267] wlp2s0: associate with 6c:f3:7f:85:61:c8 (try 1/3)
[436055.001745] wlp2s0: RX AssocResp from 6c:f3:7f:85:61:c8 (capab=0x1411 status=0 aid=2)
[436055.004181] wlp2s0: associated
[436055.093322] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 6c:f3:7f:85:61:c8
[436114.217212] wlp2s0: deauthenticating from 6c:f3:7f:85:61:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[436115.650269] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436115.699571] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436120.544471] wlp2s0: authenticate with 84:d4:7e:c0:59:f2
[436120.581688] wlp2s0: send auth to 84:d4:7e:c0:59:f2 (try 1/3)
[436120.582382] wlp2s0: authenticated
[436125.584818] wlp2s0: aborting authentication with 84:d4:7e:c0:59:f2 by local choice (Reason: 3=DEAUTH_LEAVING)
[436126.201073] wlp2s0: authenticate with 84:d4:7e:bd:0e:12
[436126.237979] wlp2s0: send auth to 84:d4:7e:bd:0e:12 (try 1/3)
[436126.238616] wlp2s0: authenticated
[436131.239918] wlp2s0: aborting authentication with 84:d4:7e:bd:0e:12 by local choice (Reason: 3=DEAUTH_LEAVING)
[436131.704169] wlp2s0: authenticate with 84:d4:7e:bd:0e:72
[436131.744967] wlp2s0: send auth to 84:d4:7e:bd:0e:72 (try 1/3)
[436131.745606] wlp2s0: authenticated
[436136.749322] wlp2s0: aborting authentication with 84:d4:7e:bd:0e:72 by local choice (Reason: 3=DEAUTH_LEAVING)
[436137.061297] wlp2s0: authenticate with 84:d4:7e:bc:fd:d2
[436137.098557] wlp2s0: send auth to 84:d4:7e:bc:fd:d2 (try 1/3)
[436137.099315] wlp2s0: authenticated
[436141.020298] wlp2s0: aborting authentication with 84:d4:7e:bc:fd:d2 by local choice (Reason: 3=DEAUTH_LEAVING)
[436141.079511] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436141.088199] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436146.025489] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436150.924117] wlp2s0: authenticate with 6c:f3:7f:85:61:c8
[436150.961392] wlp2s0: send auth to 6c:f3:7f:85:61:c8 (try 1/3)
[436150.962895] wlp2s0: authenticated
[436150.974569] wlp2s0: associate with 6c:f3:7f:85:61:c8 (try 1/3)
[436150.977228] wlp2s0: RX AssocResp from 6c:f3:7f:85:61:c8 (capab=0x1411 status=0 aid=2)
[436150.979578] wlp2s0: associated
[436150.979619] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[436151.044329] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 6c:f3:7f:85:61:c8
[436194.415310] wlp2s0: deauthenticating from 6c:f3:7f:85:61:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[436194.430011] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436194.499963] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[436199.379869] wlp2s0: authenticate with 84:d4:7e:bd:0e:12
[436199.417187] wlp2s0: send auth to 84:d4:7e:bd:0e:12 (try 1/3)
[436199.417804] wlp2s0: authenticated
[436199.424554] wlp2s0: associate with 84:d4:7e:bd:0e:12 (try 1/3)
[436199.426326] wlp2s0: RX AssocResp from 84:d4:7e:bd:0e:12 (capab=0x1 status=0 aid=10)
[436199.428882] wlp2s0: associated
[436199.428918] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[436199.526437] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:d4:7e:bd:0e:12
[436210.144669] wlp2s0: disconnect from AP 84:d4:7e:bd:0e:12 for new auth to 84:d4:7e:c0:59:f2
[436210.151192] wlp2s0: authenticate with 84:d4:7e:c0:59:f2
[436210.188294] wlp2s0: send auth to 84:d4:7e:c0:59:f2 (try 1/3)
[436210.188937] wlp2s0: authenticated
[436210.194564] wlp2s0: associate with 84:d4:7e:c0:59:f2 (try 1/3)
[436210.195456] wlp2s0: RX AssocResp from 84:d4:7e:c0:59:f2 (capab=0x1 status=0 aid=6)
[436210.197899] wlp2s0: associated
[436210.229862] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:d4:7e:c0:59:f2
[445012.141894] wlp2s0: deauthenticating from 84:d4:7e:c0:59:f2 by local choice (Reason: 3=DEAUTH_LEAVING)
[445012.163380] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445012.243876] PM: Hibernation mode set to 'platform'
[445013.201530] PM: Syncing filesystems ...
[445013.643318] PM: done.
[445013.643322] Freezing user space processes ... (elapsed 0.002 seconds) done.
[445013.645400] OOM killer disabled.
[445013.645739] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[445013.645742] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[445013.645744] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[445013.645750] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[445013.645752] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[445013.645974] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[445013.648673] PM: Basic memory bitmaps created
[445013.649134] PM: Preallocating image memory... done (allocated 1475376 pages)
[445014.887617] PM: Allocated 5901504 kbytes in 1.23 seconds (4797.97 MB/s)
[445014.887618] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[445014.889027] Suspending console(s) (use no_console_suspend to debug)
[445015.251478] PM: freeze of devices complete after 362.448 msecs
[445015.251931] PM: late freeze of devices complete after 0.452 msecs
[445015.266547] PM: noirq freeze of devices complete after 14.614 msecs
[445015.266801] ACPI: Preparing to enter system sleep state S4
[445015.346596] ACPI: EC: event blocked
[445015.346596] ACPI: EC: EC stopped
[445015.346597] PM: Saving platform NVS memory
[445015.349630] Disabling non-boot CPUs ...
[445015.374549] smpboot: CPU 1 is now offline
[445015.394538] smpboot: CPU 2 is now offline
[445015.437845] smpboot: CPU 3 is now offline
[445015.458379] smpboot: CPU 4 is now offline
[445015.487766] smpboot: CPU 5 is now offline
[445015.521139] smpboot: CPU 6 is now offline
[445015.547755] smpboot: CPU 7 is now offline
[445015.549263] PM: Creating hibernation image:
[445015.683427] PM: Need to copy 1476256 pages
[445015.683428] PM: Normal pages needed: 1476256 + 1024, available pages: 2707399
[445015.549971] PM: Restoring platform NVS memory
[445015.550450] ACPI: EC: EC started
[445015.551156] Suspended for 9628.597 seconds
[445015.551188] Enabling non-boot CPUs ...
[445015.551219] x86: Booting SMP configuration:
[445015.551219] smpboot: Booting Node 0 Processor 1 APIC 0x2
[445015.551735] cache: parent cpu1 should not be sleeping
[445015.551842] CPU1 is up
[445015.551855] smpboot: Booting Node 0 Processor 2 APIC 0x4
[445015.552372] cache: parent cpu2 should not be sleeping
[445015.552483] CPU2 is up
[445015.552496] smpboot: Booting Node 0 Processor 3 APIC 0x6
[445015.553010] cache: parent cpu3 should not be sleeping
[445015.553128] CPU3 is up
[445015.553140] smpboot: Booting Node 0 Processor 4 APIC 0x1
[445015.553750] cache: parent cpu4 should not be sleeping
[445015.553874] CPU4 is up
[445015.553888] smpboot: Booting Node 0 Processor 5 APIC 0x3
[445015.554418] cache: parent cpu5 should not be sleeping
[445015.554549] CPU5 is up
[445015.554561] smpboot: Booting Node 0 Processor 6 APIC 0x5
[445015.555082] cache: parent cpu6 should not be sleeping
[445015.555218] CPU6 is up
[445015.555229] smpboot: Booting Node 0 Processor 7 APIC 0x7
[445015.555758] cache: parent cpu7 should not be sleeping
[445015.555901] CPU7 is up
[445015.562495] ACPI: Waking up from system sleep state S4
[445015.616296] PM: noirq restore of devices complete after 14.980 msecs
[445015.616653] PM: early restore of devices complete after 0.323 msecs
[445015.750778] usb usb1: root hub lost power or was reset
[445015.750779] usb usb2: root hub lost power or was reset
[445015.750834] ACPI: EC: event unblocked
[445015.760671] sd 3:0:0:0: [sda] Starting disk
[445016.089638] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[445016.093687] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[445016.093709] ata2: SATA link down (SStatus 4 SControl 300)
[445016.093728] ata3: SATA link down (SStatus 4 SControl 300)
[445016.096121] ata4.00: configured for UDMA/133
[445016.333077] usb 1-7: reset full-speed USB device number 36 using xhci_hcd
[445016.417037] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[445016.446121] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[445016.465001] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[445016.465008] PM: Device 1-7 failed to restore async: error -32
[445016.975137] PM: restore of devices complete after 1224.397 msecs
[445016.975425] usb 1-10:1.0: rebind failed: -517
[445016.975426] usb 1-10:1.1: rebind failed: -517
[445016.975637] acpi LNXPOWER:16: Turning OFF
[445016.975678] acpi LNXPOWER:15: Turning OFF
[445016.975719] acpi LNXPOWER:14: Turning OFF
[445016.975759] acpi LNXPOWER:13: Turning OFF
[445016.975799] acpi LNXPOWER:12: Turning OFF
[445016.975838] acpi LNXPOWER:11: Turning OFF
[445016.975877] acpi LNXPOWER:10: Turning OFF
[445016.975918] acpi LNXPOWER:0f: Turning OFF
[445016.975957] acpi LNXPOWER:0e: Turning OFF
[445016.975997] acpi LNXPOWER:0d: Turning OFF
[445016.976037] acpi LNXPOWER:0c: Turning OFF
[445016.976077] acpi LNXPOWER:0b: Turning OFF
[445016.976116] acpi LNXPOWER:0a: Turning OFF
[445016.976156] acpi LNXPOWER:09: Turning OFF
[445016.976196] acpi LNXPOWER:08: Turning OFF
[445016.976243] acpi LNXPOWER:07: Turning OFF
[445016.976315] acpi LNXPOWER:06: Turning OFF
[445016.976355] acpi LNXPOWER:05: Turning OFF
[445016.976394] acpi LNXPOWER:04: Turning OFF
[445016.976433] acpi LNXPOWER:03: Turning OFF
[445016.976463] PM: Image restored successfully.
[445016.976498] PM: Basic memory bitmaps freed
[445016.976500] OOM killer enabled.
[445016.976501] Restarting tasks ... done.
[445017.036404] video LNXVIDEO:01: Restoring backlight state
[445017.089637] usb 1-2: new high-speed USB device number 37 using xhci_hcd
[445017.233333] hub 1-2:1.0: USB hub found
[445017.233355] hub 1-2:1.0: 3 ports detected
[445017.233767] usb 1-7: USB disconnect, device number 36
[445017.294002] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[445017.294413] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[445017.295065] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445017.363083] usb 1-7: new full-speed USB device number 38 using xhci_hcd
[445017.582933] usb 1-2.1: new full-speed USB device number 39 using xhci_hcd
[445017.701578] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.001E/input/input28
[445017.759818] hid-generic 0003:0853:0100.001E: input,hidraw0: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[445017.802940] usb 1-9: new full-speed USB device number 40 using xhci_hcd
[445017.934634] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1532:0054.001F/input/input29
[445017.934685] hid-generic 0003:1532:0054.001F: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-9/input0
[445017.994181] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[445018.045107] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445018.820389] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[445018.867577] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445018.927816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445023.797496] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[445028.691177] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[445028.728220] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[445028.729747] wlp2s0: authenticated
[445028.736240] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[445028.739038] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[445028.741334] wlp2s0: associated
[445028.741367] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[445028.749353] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[475356.258748] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[475356.267224] wlp2s0: authenticate with 24:de:c6:52:ca:58
[475356.307736] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[475356.311844] wlp2s0: authenticated
[475356.314740] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[475356.317389] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=2)
[475356.319591] wlp2s0: associated
[475356.388916] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[475393.429190] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[475393.438628] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[475393.476073] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[475393.477576] wlp2s0: authenticated
[475393.481399] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[475393.484162] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[475393.486300] wlp2s0: associated
[475393.504347] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[483781.547133] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[483781.563291] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483781.636268] PM: Hibernation mode set to 'platform'
[483782.536840] PM: Syncing filesystems ...
[483783.090333] PM: done.
[483783.090335] Freezing user space processes ... (elapsed 0.001 seconds) done.
[483783.091701] OOM killer disabled.
[483783.091812] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[483783.091813] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[483783.091814] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[483783.091815] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[483783.091815] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[483783.091866] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[483783.092478] PM: Basic memory bitmaps created
[483783.092634] PM: Preallocating image memory... done (allocated 1583194 pages)
[483783.440287] PM: Allocated 6332776 kbytes in 0.34 seconds (18625.81 MB/s)
[483783.440288] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[483783.441612] Suspending console(s) (use no_console_suspend to debug)
[483783.796962] PM: freeze of devices complete after 355.348 msecs
[483783.797442] PM: late freeze of devices complete after 0.478 msecs
[483783.813466] PM: noirq freeze of devices complete after 16.022 msecs
[483783.813720] ACPI: Preparing to enter system sleep state S4
[483783.893519] ACPI: EC: event blocked
[483783.893520] ACPI: EC: EC stopped
[483783.893520] PM: Saving platform NVS memory
[483783.896740] Disabling non-boot CPUs ...
[483783.924801] smpboot: CPU 1 is now offline
[483783.944786] smpboot: CPU 2 is now offline
[483783.974785] smpboot: CPU 3 is now offline
[483783.995418] smpboot: CPU 4 is now offline
[483784.024681] smpboot: CPU 5 is now offline
[483784.054681] smpboot: CPU 6 is now offline
[483784.081335] smpboot: CPU 7 is now offline
[483784.082853] PM: Creating hibernation image:
[483784.232055] PM: Need to copy 1584655 pages
[483784.232056] PM: Normal pages needed: 1584655 + 1024, available pages: 2599002
[483784.083562] PM: Restoring platform NVS memory
[483784.083973] ACPI: EC: EC started
[483784.084680] Suspended for 22152.467 seconds
[483784.084712] Enabling non-boot CPUs ...
[483784.084744] x86: Booting SMP configuration:
[483784.084744] smpboot: Booting Node 0 Processor 1 APIC 0x2
[483784.085259] cache: parent cpu1 should not be sleeping
[483784.085366] CPU1 is up
[483784.085379] smpboot: Booting Node 0 Processor 2 APIC 0x4
[483784.085895] cache: parent cpu2 should not be sleeping
[483784.086006] CPU2 is up
[483784.086019] smpboot: Booting Node 0 Processor 3 APIC 0x6
[483784.086535] cache: parent cpu3 should not be sleeping
[483784.086652] CPU3 is up
[483784.086664] smpboot: Booting Node 0 Processor 4 APIC 0x1
[483784.087272] cache: parent cpu4 should not be sleeping
[483784.087398] CPU4 is up
[483784.087412] smpboot: Booting Node 0 Processor 5 APIC 0x3
[483784.087826] cache: parent cpu5 should not be sleeping
[483784.087954] CPU5 is up
[483784.087967] smpboot: Booting Node 0 Processor 6 APIC 0x5
[483784.088488] cache: parent cpu6 should not be sleeping
[483784.088625] CPU6 is up
[483784.088636] smpboot: Booting Node 0 Processor 7 APIC 0x7
[483784.089181] cache: parent cpu7 should not be sleeping
[483784.089327] CPU7 is up
[483784.095897] ACPI: Waking up from system sleep state S4
[483784.146486] PM: noirq restore of devices complete after 14.978 msecs
[483784.146803] PM: early restore of devices complete after 0.286 msecs
[483784.275261] usb usb1: root hub lost power or was reset
[483784.275262] usb usb2: root hub lost power or was reset
[483784.275324] ACPI: EC: event unblocked
[483784.280927] sd 3:0:0:0: [sda] Starting disk
[483784.607633] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[483784.607650] ata2: SATA link down (SStatus 4 SControl 300)
[483784.607668] ata3: SATA link down (SStatus 4 SControl 300)
[483784.610117] ata4.00: configured for UDMA/133
[483784.613188] usb 1-2: reset high-speed USB device number 37 using xhci_hcd
[483784.856550] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[483784.943610] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[483784.972655] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[483785.099943] usb 1-7: reset full-speed USB device number 38 using xhci_hcd
[483785.232069] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[483785.232078] PM: Device 1-7 failed to restore async: error -32
[483785.343324] usb 1-9: reset full-speed USB device number 40 using xhci_hcd
[483785.563286] usb 1-2.1: reset full-speed USB device number 39 using xhci_hcd
[483785.677852] PM: restore of devices complete after 1402.649 msecs
[483785.678333] usb 1-10:1.0: rebind failed: -517
[483785.678336] usb 1-10:1.1: rebind failed: -517
[483785.678888] acpi LNXPOWER:16: Turning OFF
[483785.679023] acpi LNXPOWER:15: Turning OFF
[483785.679155] acpi LNXPOWER:14: Turning OFF
[483785.679285] acpi LNXPOWER:13: Turning OFF
[483785.679414] acpi LNXPOWER:12: Turning OFF
[483785.679542] acpi LNXPOWER:11: Turning OFF
[483785.679670] acpi LNXPOWER:10: Turning OFF
[483785.679827] acpi LNXPOWER:0f: Turning OFF
[483785.679960] acpi LNXPOWER:0e: Turning OFF
[483785.680089] acpi LNXPOWER:0d: Turning OFF
[483785.680221] acpi LNXPOWER:0c: Turning OFF
[483785.680350] acpi LNXPOWER:0b: Turning OFF
[483785.680478] acpi LNXPOWER:0a: Turning OFF
[483785.680608] acpi LNXPOWER:09: Turning OFF
[483785.680736] acpi LNXPOWER:08: Turning OFF
[483785.680865] acpi LNXPOWER:07: Turning OFF
[483785.680994] acpi LNXPOWER:06: Turning OFF
[483785.681121] acpi LNXPOWER:05: Turning OFF
[483785.681248] acpi LNXPOWER:04: Turning OFF
[483785.681377] acpi LNXPOWER:03: Turning OFF
[483785.681472] PM: Image restored successfully.
[483785.681545] PM: Basic memory bitmaps freed
[483785.681551] OOM killer enabled.
[483785.681551] Restarting tasks ...
[483785.682391] usb 1-7: USB disconnect, device number 38
[483785.690684] done.
[483785.743254] video LNXVIDEO:01: Restoring backlight state
[483785.796458] usb 1-7: new full-speed USB device number 41 using xhci_hcd
[483786.038061] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[483786.038597] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[483786.039792] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483786.740822] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[483786.793519] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483787.574138] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[483787.628068] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483787.702917] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483792.570045] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[483797.459300] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[483797.492900] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[483797.494471] wlp2s0: authenticated
[483797.499763] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[483797.502476] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[483797.504761] wlp2s0: associated
[483797.504785] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[483797.584330] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[485671.557606] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[485671.573960] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485671.640079] PM: Hibernation mode set to 'platform'
[485672.539153] PM: Syncing filesystems ...
[485672.991554] PM: done.
[485672.991557] Freezing user space processes ... (elapsed 0.001 seconds) done.
[485672.992941] OOM killer disabled.
[485672.993217] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[485672.993218] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[485672.993220] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[485672.993224] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[485672.993225] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[485672.993383] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[485672.994991] PM: Basic memory bitmaps created
[485672.995303] PM: Preallocating image memory... done (allocated 1629417 pages)
[485673.596694] PM: Allocated 6517668 kbytes in 0.60 seconds (10862.78 MB/s)
[485673.596694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[485673.598143] Suspending console(s) (use no_console_suspend to debug)
[485673.960624] PM: freeze of devices complete after 362.480 msecs
[485673.960910] PM: late freeze of devices complete after 0.284 msecs
[485673.976199] PM: noirq freeze of devices complete after 15.287 msecs
[485673.976453] ACPI: Preparing to enter system sleep state S4
[485674.056250] ACPI: EC: event blocked
[485674.056251] ACPI: EC: EC stopped
[485674.056252] PM: Saving platform NVS memory
[485674.059488] Disabling non-boot CPUs ...
[485674.087552] smpboot: CPU 1 is now offline
[485674.107527] smpboot: CPU 2 is now offline
[485674.144285] smpboot: CPU 3 is now offline
[485674.174897] smpboot: CPU 4 is now offline
[485674.207415] smpboot: CPU 5 is now offline
[485674.237500] smpboot: CPU 6 is now offline
[485674.264101] smpboot: CPU 7 is now offline
[485674.265624] PM: Creating hibernation image:
[485674.394302] PM: Need to copy 1630444 pages
[485674.394303] PM: Normal pages needed: 1630444 + 1024, available pages: 2553203
[485674.266330] PM: Restoring platform NVS memory
[485674.266794] ACPI: EC: EC started
[485674.267500] Suspended for 821.820 seconds
[485674.267529] Enabling non-boot CPUs ...
[485674.267561] x86: Booting SMP configuration:
[485674.267562] smpboot: Booting Node 0 Processor 1 APIC 0x2
[485674.268079] cache: parent cpu1 should not be sleeping
[485674.268185] CPU1 is up
[485674.268197] smpboot: Booting Node 0 Processor 2 APIC 0x4
[485674.268713] cache: parent cpu2 should not be sleeping
[485674.268825] CPU2 is up
[485674.268836] smpboot: Booting Node 0 Processor 3 APIC 0x6
[485674.269351] cache: parent cpu3 should not be sleeping
[485674.269465] CPU3 is up
[485674.269477] smpboot: Booting Node 0 Processor 4 APIC 0x1
[485674.270087] cache: parent cpu4 should not be sleeping
[485674.270212] CPU4 is up
[485674.270227] smpboot: Booting Node 0 Processor 5 APIC 0x3
[485674.270641] cache: parent cpu5 should not be sleeping
[485674.270772] CPU5 is up
[485674.270784] smpboot: Booting Node 0 Processor 6 APIC 0x5
[485674.271305] cache: parent cpu6 should not be sleeping
[485674.271447] CPU6 is up
[485674.271458] smpboot: Booting Node 0 Processor 7 APIC 0x7
[485674.271984] cache: parent cpu7 should not be sleeping
[485674.272138] CPU7 is up
[485674.278728] ACPI: Waking up from system sleep state S4
[485674.329276] PM: noirq restore of devices complete after 15.170 msecs
[485674.329589] PM: early restore of devices complete after 0.286 msecs
[485674.463231] usb usb1: root hub lost power or was reset
[485674.463232] usb usb2: root hub lost power or was reset
[485674.463276] ACPI: EC: event unblocked
[485674.473278] sd 3:0:0:0: [sda] Starting disk
[485674.802587] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[485674.806254] ata2: SATA link down (SStatus 4 SControl 300)
[485674.806577] ata3: SATA link down (SStatus 4 SControl 300)
[485674.806654] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[485674.809167] ata4.00: configured for UDMA/133
[485675.046060] usb 1-7: reset full-speed USB device number 41 using xhci_hcd
[485675.130068] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[485675.159341] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[485675.177931] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[485675.177940] PM: Device 1-7 failed to restore async: error -32
[485677.357471] PM: restore of devices complete after 2894.280 msecs
[485677.357888] usb 1-10:1.0: rebind failed: -517
[485677.357891] usb 1-10:1.1: rebind failed: -517
[485677.358320] acpi LNXPOWER:16: Turning OFF
[485677.358421] acpi LNXPOWER:15: Turning OFF
[485677.358519] acpi LNXPOWER:14: Turning OFF
[485677.358617] acpi LNXPOWER:13: Turning OFF
[485677.358713] acpi LNXPOWER:12: Turning OFF
[485677.358808] acpi LNXPOWER:11: Turning OFF
[485677.358903] acpi LNXPOWER:10: Turning OFF
[485677.359001] acpi LNXPOWER:0f: Turning OFF
[485677.359097] acpi LNXPOWER:0e: Turning OFF
[485677.359194] acpi LNXPOWER:0d: Turning OFF
[485677.359308] acpi LNXPOWER:0c: Turning OFF
[485677.359405] acpi LNXPOWER:0b: Turning OFF
[485677.359501] acpi LNXPOWER:0a: Turning OFF
[485677.359598] acpi LNXPOWER:09: Turning OFF
[485677.359694] acpi LNXPOWER:08: Turning OFF
[485677.359790] acpi LNXPOWER:07: Turning OFF
[485677.359886] acpi LNXPOWER:06: Turning OFF
[485677.359981] acpi LNXPOWER:05: Turning OFF
[485677.360076] acpi LNXPOWER:04: Turning OFF
[485677.360172] acpi LNXPOWER:03: Turning OFF
[485677.360243] PM: Image restored successfully.
[485677.360313] PM: Basic memory bitmaps freed
[485677.360317] OOM killer enabled.
[485677.360318] Restarting tasks ...
[485677.360400] usb 1-2: USB disconnect, device number 37
[485677.360404] usb 1-2.1: USB disconnect, device number 39
[485677.362736] usb 1-7: USB disconnect, device number 41
[485677.366019] done.
[485677.370072] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[485677.370074] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[485677.397796] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[485677.416050] video LNXVIDEO:01: Restoring backlight state
[485677.475974] usb 1-7: new full-speed USB device number 42 using xhci_hcd
[485677.610117] usb 1-9: USB disconnect, device number 40
[485677.687180] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[485677.687667] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[485677.688551] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485678.390627] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[485678.440128] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485679.217364] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[485679.263124] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485679.367515] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485684.234690] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[485689.114347] wlp2s0: authenticate with 24:de:c6:ec:b3:10
[485689.146909] wlp2s0: send auth to 24:de:c6:ec:b3:10 (try 1/3)
[485689.148787] wlp2s0: authenticated
[485689.159236] wlp2s0: associate with 24:de:c6:ec:b3:10 (try 1/3)
[485689.162024] wlp2s0: RX AssocResp from 24:de:c6:ec:b3:10 (capab=0x1411 status=0 aid=14)
[485689.164240] wlp2s0: associated
[485689.164277] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[485689.203732] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b3:10
[486901.604671] wlp2s0: deauthenticating from 24:de:c6:ec:b3:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[486901.620742] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486901.692858] PM: Hibernation mode set to 'platform'
[486902.622317] PM: Syncing filesystems ...
[486903.030611] PM: done.
[486903.030613] Freezing user space processes ... (elapsed 0.001 seconds) done.
[486903.032372] OOM killer disabled.
[486903.032581] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[486903.032583] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[486903.032584] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[486903.032587] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[486903.032588] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[486903.032699] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[486903.034036] PM: Basic memory bitmaps created
[486903.034319] PM: Preallocating image memory... done (allocated 1612417 pages)
[486903.783962] PM: Allocated 6449668 kbytes in 0.74 seconds (8715.76 MB/s)
[486903.783962] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[486903.785327] Suspending console(s) (use no_console_suspend to debug)
[486904.141248] PM: freeze of devices complete after 355.918 msecs
[486904.141686] PM: late freeze of devices complete after 0.437 msecs
[486904.155775] PM: noirq freeze of devices complete after 14.088 msecs
[486904.156030] ACPI: Preparing to enter system sleep state S4
[486904.202478] ACPI: EC: event blocked
[486904.202479] ACPI: EC: EC stopped
[486904.202479] PM: Saving platform NVS memory
[486904.205502] Disabling non-boot CPUs ...
[486904.230436] smpboot: CPU 1 is now offline
[486904.250419] smpboot: CPU 2 is now offline
[486904.287065] smpboot: CPU 3 is now offline
[486904.307601] smpboot: CPU 4 is now offline
[486904.336984] smpboot: CPU 5 is now offline
[486904.370313] smpboot: CPU 6 is now offline
[486904.396978] smpboot: CPU 7 is now offline
[486904.398498] PM: Creating hibernation image:
[486904.527968] PM: Need to copy 1613442 pages
[486904.527969] PM: Normal pages needed: 1613442 + 1024, available pages: 2570215
[486904.399204] PM: Restoring platform NVS memory
[486904.399667] ACPI: EC: EC started
[486904.400372] Suspended for 170.870 seconds
[486904.400410] Enabling non-boot CPUs ...
[486904.400442] x86: Booting SMP configuration:
[486904.400442] smpboot: Booting Node 0 Processor 1 APIC 0x2
[486904.400965] cache: parent cpu1 should not be sleeping
[486904.401070] CPU1 is up
[486904.401082] smpboot: Booting Node 0 Processor 2 APIC 0x4
[486904.401595] cache: parent cpu2 should not be sleeping
[486904.401707] CPU2 is up
[486904.401720] smpboot: Booting Node 0 Processor 3 APIC 0x6
[486904.402233] cache: parent cpu3 should not be sleeping
[486904.402349] CPU3 is up
[486904.402361] smpboot: Booting Node 0 Processor 4 APIC 0x1
[486904.402959] cache: parent cpu4 should not be sleeping
[486904.403086] CPU4 is up
[486904.403103] smpboot: Booting Node 0 Processor 5 APIC 0x3
[486904.403620] cache: parent cpu5 should not be sleeping
[486904.403750] CPU5 is up
[486904.403763] smpboot: Booting Node 0 Processor 6 APIC 0x5
[486904.404284] cache: parent cpu6 should not be sleeping
[486904.404423] CPU6 is up
[486904.404434] smpboot: Booting Node 0 Processor 7 APIC 0x7
[486904.404978] cache: parent cpu7 should not be sleeping
[486904.405125] CPU7 is up
[486904.411715] ACPI: Waking up from system sleep state S4
[486904.462159] PM: noirq restore of devices complete after 15.167 msecs
[486904.462386] PM: early restore of devices complete after 0.200 msecs
[486904.579692] usb usb1: root hub lost power or was reset
[486904.579694] usb usb2: root hub lost power or was reset
[486904.579728] ACPI: EC: event unblocked
[486904.589812] sd 3:0:0:0: [sda] Starting disk
[486904.918842] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[486904.926332] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[486904.926351] ata2: SATA link down (SStatus 4 SControl 300)
[486904.926385] ata3: SATA link down (SStatus 4 SControl 300)
[486904.928796] ata4.00: configured for UDMA/133
[486905.162212] usb 1-7: reset full-speed USB device number 42 using xhci_hcd
[486905.247642] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[486905.276643] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[486905.294298] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[486905.294306] PM: Device 1-7 failed to restore async: error -32
[486905.803838] PM: restore of devices complete after 1224.242 msecs
[486905.804128] usb 1-10:1.0: rebind failed: -517
[486905.804129] usb 1-10:1.1: rebind failed: -517
[486905.804341] acpi LNXPOWER:16: Turning OFF
[486905.804382] acpi LNXPOWER:15: Turning OFF
[486905.804422] acpi LNXPOWER:14: Turning OFF
[486905.804463] acpi LNXPOWER:13: Turning OFF
[486905.804502] acpi LNXPOWER:12: Turning OFF
[486905.804542] acpi LNXPOWER:11: Turning OFF
[486905.804581] acpi LNXPOWER:10: Turning OFF
[486905.804621] acpi LNXPOWER:0f: Turning OFF
[486905.804661] acpi LNXPOWER:0e: Turning OFF
[486905.804701] acpi LNXPOWER:0d: Turning OFF
[486905.804741] acpi LNXPOWER:0c: Turning OFF
[486905.804781] acpi LNXPOWER:0b: Turning OFF
[486905.804820] acpi LNXPOWER:0a: Turning OFF
[486905.804859] acpi LNXPOWER:09: Turning OFF
[486905.804899] acpi LNXPOWER:08: Turning OFF
[486905.804939] acpi LNXPOWER:07: Turning OFF
[486905.804978] acpi LNXPOWER:06: Turning OFF
[486905.805017] acpi LNXPOWER:05: Turning OFF
[486905.805056] acpi LNXPOWER:04: Turning OFF
[486905.805095] acpi LNXPOWER:03: Turning OFF
[486905.805124] PM: Image restored successfully.
[486905.805161] PM: Basic memory bitmaps freed
[486905.805163] OOM killer enabled.
[486905.805164] Restarting tasks ...
[486905.805238] usb 1-7: USB disconnect, device number 42
[486905.807749] done.
[486905.811769] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[486905.811771] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[486905.839504] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[486905.858911] video LNXVIDEO:01: Restoring backlight state
[486905.918798] usb 1-7: new full-speed USB device number 43 using xhci_hcd
[486906.137144] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[486906.137714] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[486906.138743] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486906.840526] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[486906.892219] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486906.946808] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486911.840306] wlp2s0: authenticate with 24:de:c6:ec:b3:10
[486911.874649] wlp2s0: send auth to 24:de:c6:ec:b3:10 (try 1/3)
[486911.876383] wlp2s0: authenticated
[486911.878790] wlp2s0: associate with 24:de:c6:ec:b3:10 (try 1/3)
[486911.881111] wlp2s0: RX AssocResp from 24:de:c6:ec:b3:10 (capab=0x1411 status=0 aid=14)
[486911.883459] wlp2s0: associated
[486911.883494] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[486911.916148] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b3:10
[486964.504896] wlp2s0: deauthenticating from 24:de:c6:ec:b3:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[486964.518416] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486964.730174] PM: Hibernation mode set to 'platform'
[486965.638458] PM: Syncing filesystems ...
[486966.005955] PM: done.
[486966.005958] Freezing user space processes ... (elapsed 0.001 seconds) done.
[486966.007876] OOM killer disabled.
[486966.008106] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[486966.008107] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[486966.008108] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[486966.008112] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[486966.008113] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[486966.008231] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[486966.009636] PM: Basic memory bitmaps created
[486966.009913] PM: Preallocating image memory... done (allocated 1616594 pages)
[486966.375773] PM: Allocated 6466376 kbytes in 0.36 seconds (17962.15 MB/s)
[486966.375773] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[486966.377194] Suspending console(s) (use no_console_suspend to debug)
[486966.743375] PM: freeze of devices complete after 366.178 msecs
[486966.743713] PM: late freeze of devices complete after 0.337 msecs
[486966.758837] PM: noirq freeze of devices complete after 15.122 msecs
[486966.759091] ACPI: Preparing to enter system sleep state S4
[486966.805550] ACPI: EC: event blocked
[486966.805550] ACPI: EC: EC stopped
[486966.805551] PM: Saving platform NVS memory
[486966.808236] Disabling non-boot CPUs ...
[486966.833512] smpboot: CPU 1 is now offline
[486966.853501] smpboot: CPU 2 is now offline
[486966.883472] smpboot: CPU 3 is now offline
[486966.913797] smpboot: CPU 4 is now offline
[486966.943390] smpboot: CPU 5 is now offline
[486966.973384] smpboot: CPU 6 is now offline
[486967.000040] smpboot: CPU 7 is now offline
[486967.001519] PM: Creating hibernation image:
[486967.151687] PM: Need to copy 1619333 pages
[486967.151688] PM: Normal pages needed: 1619333 + 1024, available pages: 2564315
[486967.002229] PM: Restoring platform NVS memory
[486967.002690] ACPI: EC: EC started
[486967.003396] Suspended for 5119.400 seconds
[486967.003428] Enabling non-boot CPUs ...
[486967.003458] x86: Booting SMP configuration:
[486967.003459] smpboot: Booting Node 0 Processor 1 APIC 0x2
[486967.003996] cache: parent cpu1 should not be sleeping
[486967.004102] CPU1 is up
[486967.004114] smpboot: Booting Node 0 Processor 2 APIC 0x4
[486967.004649] cache: parent cpu2 should not be sleeping
[486967.004760] CPU2 is up
[486967.004772] smpboot: Booting Node 0 Processor 3 APIC 0x6
[486967.005305] cache: parent cpu3 should not be sleeping
[486967.005421] CPU3 is up
[486967.005434] smpboot: Booting Node 0 Processor 4 APIC 0x1
[486967.006051] cache: parent cpu4 should not be sleeping
[486967.006176] CPU4 is up
[486967.006193] smpboot: Booting Node 0 Processor 5 APIC 0x3
[486967.006724] cache: parent cpu5 should not be sleeping
[486967.006855] CPU5 is up
[486967.006867] smpboot: Booting Node 0 Processor 6 APIC 0x5
[486967.007408] cache: parent cpu6 should not be sleeping
[486967.007548] CPU6 is up
[486967.007560] smpboot: Booting Node 0 Processor 7 APIC 0x7
[486967.008105] cache: parent cpu7 should not be sleeping
[486967.008259] CPU7 is up
[486967.014863] ACPI: Waking up from system sleep state S4
[486967.068580] PM: noirq restore of devices complete after 14.940 msecs
[486967.068984] PM: early restore of devices complete after 0.366 msecs
[486967.209660] usb usb1: root hub lost power or was reset
[486967.209661] usb usb2: root hub lost power or was reset
[486967.209730] ACPI: EC: event unblocked
[486967.209867] sd 3:0:0:0: [sda] Starting disk
[486967.542961] ata2: SATA link down (SStatus 4 SControl 300)
[486967.542981] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[486967.542998] ata3: SATA link down (SStatus 4 SControl 300)
[486967.545503] ata4.00: configured for UDMA/133
[486967.548542] usb 1-7: reset full-speed USB device number 43 using xhci_hcd
[486967.680762] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[486967.680768] PM: Device 1-7 failed to restore async: error -32
[486967.792026] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[486967.878201] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[486967.907533] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[486968.446903] PM: restore of devices complete after 1237.285 msecs
[486968.447192] usb 1-10:1.0: rebind failed: -517
[486968.447193] usb 1-10:1.1: rebind failed: -517
[486968.447404] acpi LNXPOWER:16: Turning OFF
[486968.447446] acpi LNXPOWER:15: Turning OFF
[486968.447486] acpi LNXPOWER:14: Turning OFF
[486968.447526] acpi LNXPOWER:13: Turning OFF
[486968.447566] acpi LNXPOWER:12: Turning OFF
[486968.447606] acpi LNXPOWER:11: Turning OFF
[486968.447645] acpi LNXPOWER:10: Turning OFF
[486968.447685] acpi LNXPOWER:0f: Turning OFF
[486968.447725] acpi LNXPOWER:0e: Turning OFF
[486968.447764] acpi LNXPOWER:0d: Turning OFF
[486968.447804] acpi LNXPOWER:0c: Turning OFF
[486968.447844] acpi LNXPOWER:0b: Turning OFF
[486968.447883] acpi LNXPOWER:0a: Turning OFF
[486968.447923] acpi LNXPOWER:09: Turning OFF
[486968.447963] acpi LNXPOWER:08: Turning OFF
[486968.448002] acpi LNXPOWER:07: Turning OFF
[486968.448041] acpi LNXPOWER:06: Turning OFF
[486968.448080] acpi LNXPOWER:05: Turning OFF
[486968.448119] acpi LNXPOWER:04: Turning OFF
[486968.448159] acpi LNXPOWER:03: Turning OFF
[486968.448189] PM: Image restored successfully.
[486968.448226] PM: Basic memory bitmaps freed
[486968.448228] OOM killer enabled.
[486968.448229] Restarting tasks ... done.
[486968.458759] usb 1-7: USB disconnect, device number 43
[486968.469334] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[486968.469336] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[486968.497075] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[486968.502026] video LNXVIDEO:01: Restoring backlight state
[486968.585332] usb 1-7: new full-speed USB device number 44 using xhci_hcd
[486968.803440] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[486968.804058] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[486968.805096] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486969.506318] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[486969.556179] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486970.333213] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[486970.378443] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486970.455140] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486975.348888] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[486980.230881] wlp2s0: authenticate with 24:de:c6:ec:b3:10
[486980.264188] wlp2s0: send auth to 24:de:c6:ec:b3:10 (try 1/3)
[486980.267263] wlp2s0: authenticated
[486980.268523] wlp2s0: associate with 24:de:c6:ec:b3:10 (try 1/3)
[486980.273920] wlp2s0: RX AssocResp from 24:de:c6:ec:b3:10 (capab=0x1411 status=0 aid=12)
[486980.276353] wlp2s0: associated
[486980.276389] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[486980.294727] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:ec:b3:10
[489752.295015] wlp2s0: deauthenticating from 24:de:c6:ec:b3:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[489752.312318] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489752.392466] PM: Hibernation mode set to 'platform'
[489753.322196] PM: Syncing filesystems ...
[489753.895537] PM: done.
[489753.895540] Freezing user space processes ... (elapsed 0.001 seconds) done.
[489753.897519] OOM killer disabled.
[489753.897825] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[489753.897828] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[489753.897829] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[489753.897834] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[489753.897835] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[489753.898006] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[489753.899809] PM: Basic memory bitmaps created
[489753.900165] PM: Preallocating image memory... done (allocated 1515830 pages)
[489754.872520] PM: Allocated 6063320 kbytes in 0.97 seconds (6250.84 MB/s)
[489754.872520] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[489754.873964] Suspending console(s) (use no_console_suspend to debug)
[489755.234461] PM: freeze of devices complete after 360.494 msecs
[489755.234733] PM: late freeze of devices complete after 0.270 msecs
[489755.251478] PM: noirq freeze of devices complete after 16.744 msecs
[489755.251732] ACPI: Preparing to enter system sleep state S4
[489755.298202] ACPI: EC: event blocked
[489755.298203] ACPI: EC: EC stopped
[489755.298204] PM: Saving platform NVS memory
[489755.301248] Disabling non-boot CPUs ...
[489755.326152] smpboot: CPU 1 is now offline
[489755.349461] smpboot: CPU 2 is now offline
[489755.386123] smpboot: CPU 3 is now offline
[489755.416670] smpboot: CPU 4 is now offline
[489755.446024] smpboot: CPU 5 is now offline
[489755.476023] smpboot: CPU 6 is now offline
[489755.502679] smpboot: CPU 7 is now offline
[489755.504180] PM: Creating hibernation image:
[489755.646305] PM: Need to copy 1516791 pages
[489755.646307] PM: Normal pages needed: 1516791 + 1024, available pages: 2666855
[489755.504886] PM: Restoring platform NVS memory
[489755.505353] ACPI: EC: EC started
[489755.506060] Suspended for 85840.500 seconds
[489755.506099] Enabling non-boot CPUs ...
[489755.506124] x86: Booting SMP configuration:
[489755.506125] smpboot: Booting Node 0 Processor 1 APIC 0x2
[489755.506642] cache: parent cpu1 should not be sleeping
[489755.506749] CPU1 is up
[489755.506761] smpboot: Booting Node 0 Processor 2 APIC 0x4
[489755.507276] cache: parent cpu2 should not be sleeping
[489755.507387] CPU2 is up
[489755.507399] smpboot: Booting Node 0 Processor 3 APIC 0x6
[489755.507816] cache: parent cpu3 should not be sleeping
[489755.507945] CPU3 is up
[489755.507957] smpboot: Booting Node 0 Processor 4 APIC 0x1
[489755.508557] cache: parent cpu4 should not be sleeping
[489755.508686] CPU4 is up
[489755.508702] smpboot: Booting Node 0 Processor 5 APIC 0x3
[489755.509218] cache: parent cpu5 should not be sleeping
[489755.509350] CPU5 is up
[489755.509364] smpboot: Booting Node 0 Processor 6 APIC 0x5
[489755.509906] cache: parent cpu6 should not be sleeping
[489755.510048] CPU6 is up
[489755.510059] smpboot: Booting Node 0 Processor 7 APIC 0x7
[489755.510586] cache: parent cpu7 should not be sleeping
[489755.510734] CPU7 is up
[489755.517358] ACPI: Waking up from system sleep state S4
[489755.567876] PM: noirq restore of devices complete after 15.075 msecs
[489755.568142] PM: early restore of devices complete after 0.236 msecs
[489755.692561] usb usb1: root hub lost power or was reset
[489755.692562] usb usb2: root hub lost power or was reset
[489755.692604] ACPI: EC: event unblocked
[489755.701025] sd 3:0:0:0: [sda] Starting disk
[489756.028559] ata3: SATA link down (SStatus 4 SControl 300)
[489756.028963] ata2: SATA link down (SStatus 4 SControl 300)
[489756.028987] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[489756.031230] usb 1-7: reset full-speed USB device number 44 using xhci_hcd
[489756.031638] ata4.00: configured for UDMA/133
[489756.163266] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[489756.163274] PM: Device 1-7 failed to restore async: error -32
[489756.274671] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[489756.359488] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[489756.388612] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[489756.929557] PM: restore of devices complete after 1237.057 msecs
[489756.929853] usb 1-10:1.0: rebind failed: -517
[489756.929855] usb 1-10:1.1: rebind failed: -517
[489756.930065] acpi LNXPOWER:16: Turning OFF
[489756.930107] acpi LNXPOWER:15: Turning OFF
[489756.930147] acpi LNXPOWER:14: Turning OFF
[489756.930188] acpi LNXPOWER:13: Turning OFF
[489756.930227] acpi LNXPOWER:12: Turning OFF
[489756.930266] acpi LNXPOWER:11: Turning OFF
[489756.930305] acpi LNXPOWER:10: Turning OFF
[489756.930346] acpi LNXPOWER:0f: Turning OFF
[489756.930385] acpi LNXPOWER:0e: Turning OFF
[489756.930425] acpi LNXPOWER:0d: Turning OFF
[489756.930465] acpi LNXPOWER:0c: Turning OFF
[489756.930504] acpi LNXPOWER:0b: Turning OFF
[489756.930543] acpi LNXPOWER:0a: Turning OFF
[489756.930583] acpi LNXPOWER:09: Turning OFF
[489756.930623] acpi LNXPOWER:08: Turning OFF
[489756.930662] acpi LNXPOWER:07: Turning OFF
[489756.930701] acpi LNXPOWER:06: Turning OFF
[489756.930740] acpi LNXPOWER:05: Turning OFF
[489756.930779] acpi LNXPOWER:04: Turning OFF
[489756.930818] acpi LNXPOWER:03: Turning OFF
[489756.930847] PM: Image restored successfully.
[489756.930883] PM: Basic memory bitmaps freed
[489756.930886] OOM killer enabled.
[489756.930886] Restarting tasks ... done.
[489756.987971] video LNXVIDEO:01: Restoring backlight state
[489757.044525] usb 1-2: new high-speed USB device number 45 using xhci_hcd
[489757.178497] hub 1-2:1.0: USB hub found
[489757.178561] hub 1-2:1.0: 3 ports detected
[489757.179069] usb 1-7: USB disconnect, device number 44
[489757.275907] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[489757.276430] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[489757.277448] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489757.307895] usb 1-7: new full-speed USB device number 46 using xhci_hcd
[489757.527828] usb 1-2.1: new full-speed USB device number 47 using xhci_hcd
[489757.646505] input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:0853:0100.0025/input/input30
[489757.701411] hid-generic 0003:0853:0100.0025: input,hidraw0: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-2.1/input0
[489757.747826] usb 1-9: new full-speed USB device number 48 using xhci_hcd
[489757.879763] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1532:0054.0026/input/input31
[489757.880087] hid-generic 0003:1532:0054.0026: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-9/input0
[489757.979620] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[489758.031660] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489758.815307] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[489758.867949] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489758.948853] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489763.837403] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[489768.715030] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[489768.752426] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[489768.754025] wlp2s0: authenticated
[489768.761166] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[489768.763817] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=5)
[489768.766036] wlp2s0: associated
[489768.766079] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[489768.783393] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[510737.398267] perf: interrupt took too long (4917 > 4911), lowering kernel.perf_event_max_sample_rate to 40500
[520075.766475] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[520080.886400] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[520081.867512] wlp2s0: authenticate with 24:de:c6:52:ca:58
[520081.908213] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[520081.909790] wlp2s0: authenticated
[520081.913039] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[520081.916003] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[520081.918109] wlp2s0: associated
[520081.968898] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[520096.049204] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[520096.058412] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[520096.096124] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[520096.097643] wlp2s0: authenticated
[520096.103156] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[520096.106079] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[520096.108594] wlp2s0: associated
[520096.159481] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[540293.003837] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[540293.020331] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540293.130572] PM: Hibernation mode set to 'platform'
[540294.063176] PM: Syncing filesystems ...
[540294.816465] PM: done.
[540294.816468] Freezing user space processes ... (elapsed 0.001 seconds) done.
[540294.818194] OOM killer disabled.
[540294.818410] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[540294.818412] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[540294.818413] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[540294.818416] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[540294.818417] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[540294.818539] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[540294.819888] PM: Basic memory bitmaps created
[540294.820171] PM: Preallocating image memory... done (allocated 1645997 pages)
[540296.127385] PM: Allocated 6583988 kbytes in 1.30 seconds (5064.60 MB/s)
[540296.127386] Freezing remaining freezable tasks ... (elapsed 0.014 seconds) done.
[540296.141719] Suspending console(s) (use no_console_suspend to debug)
[540296.497485] PM: freeze of devices complete after 355.764 msecs
[540296.497952] PM: late freeze of devices complete after 0.465 msecs
[540296.513171] PM: noirq freeze of devices complete after 15.217 msecs
[540296.513426] ACPI: Preparing to enter system sleep state S4
[540296.593224] ACPI: EC: event blocked
[540296.593224] ACPI: EC: EC stopped
[540296.593225] PM: Saving platform NVS memory
[540296.596296] Disabling non-boot CPUs ...
[540296.621156] smpboot: CPU 1 is now offline
[540296.641161] smpboot: CPU 2 is now offline
[540296.661150] smpboot: CPU 3 is now offline
[540296.698347] smpboot: CPU 4 is now offline
[540296.731066] smpboot: CPU 5 is now offline
[540296.754407] smpboot: CPU 6 is now offline
[540296.784373] smpboot: CPU 7 is now offline
[540296.785879] PM: Creating hibernation image:
[540296.918754] PM: Need to copy 1644310 pages
[540296.918755] PM: Normal pages needed: 1644310 + 1024, available pages: 2539339
[540296.786587] PM: Restoring platform NVS memory
[540296.787032] ACPI: EC: EC started
[540296.787739] Suspended for 32475.718 seconds
[540296.787771] Enabling non-boot CPUs ...
[540296.787804] x86: Booting SMP configuration:
[540296.787805] smpboot: Booting Node 0 Processor 1 APIC 0x2
[540296.788324] cache: parent cpu1 should not be sleeping
[540296.788431] CPU1 is up
[540296.788444] smpboot: Booting Node 0 Processor 2 APIC 0x4
[540296.788960] cache: parent cpu2 should not be sleeping
[540296.789072] CPU2 is up
[540296.789084] smpboot: Booting Node 0 Processor 3 APIC 0x6
[540296.789506] cache: parent cpu3 should not be sleeping
[540296.789625] CPU3 is up
[540296.789638] smpboot: Booting Node 0 Processor 4 APIC 0x1
[540296.790245] cache: parent cpu4 should not be sleeping
[540296.790374] CPU4 is up
[540296.790391] smpboot: Booting Node 0 Processor 5 APIC 0x3
[540296.790906] cache: parent cpu5 should not be sleeping
[540296.791039] CPU5 is up
[540296.791052] smpboot: Booting Node 0 Processor 6 APIC 0x5
[540296.791579] cache: parent cpu6 should not be sleeping
[540296.791717] CPU6 is up
[540296.791729] smpboot: Booting Node 0 Processor 7 APIC 0x7
[540296.792255] cache: parent cpu7 should not be sleeping
[540296.792411] CPU7 is up
[540296.799026] ACPI: Waking up from system sleep state S4
[540296.852896] PM: noirq restore of devices complete after 14.971 msecs
[540296.853276] PM: early restore of devices complete after 0.346 msecs
[540297.002805] usb usb1: root hub lost power or was reset
[540297.002806] usb usb2: root hub lost power or was reset
[540297.002859] ACPI: EC: event unblocked
[540297.011755] sd 3:0:0:0: [sda] Starting disk
[540297.339665] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[540297.343439] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[540297.343768] ata2: SATA link down (SStatus 4 SControl 300)
[540297.343913] ata3: SATA link down (SStatus 4 SControl 300)
[540297.345918] ata4.00: configured for UDMA/133
[540297.582926] usb 1-7: reset full-speed USB device number 46 using xhci_hcd
[540297.671473] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[540297.700745] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[540297.714872] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[540297.714881] PM: Device 1-7 failed to restore async: error -32
[540297.826333] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[540298.069687] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[540298.289710] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[540298.404303] PM: restore of devices complete after 1401.539 msecs
[540298.404773] usb 1-10:1.0: rebind failed: -517
[540298.404777] usb 1-10:1.1: rebind failed: -517
[540298.405334] acpi LNXPOWER:16: Turning OFF
[540298.405469] acpi LNXPOWER:15: Turning OFF
[540298.405600] acpi LNXPOWER:14: Turning OFF
[540298.405730] acpi LNXPOWER:13: Turning OFF
[540298.405860] acpi LNXPOWER:12: Turning OFF
[540298.405988] acpi LNXPOWER:11: Turning OFF
[540298.406116] acpi LNXPOWER:10: Turning OFF
[540298.406283] acpi LNXPOWER:0f: Turning OFF
[540298.406414] acpi LNXPOWER:0e: Turning OFF
[540298.406544] acpi LNXPOWER:0d: Turning OFF
[540298.406674] acpi LNXPOWER:0c: Turning OFF
[540298.406811] acpi LNXPOWER:0b: Turning OFF
[540298.406929] acpi LNXPOWER:0a: Turning OFF
[540298.407048] acpi LNXPOWER:09: Turning OFF
[540298.407168] acpi LNXPOWER:08: Turning OFF
[540298.407286] acpi LNXPOWER:07: Turning OFF
[540298.407404] acpi LNXPOWER:06: Turning OFF
[540298.407521] acpi LNXPOWER:05: Turning OFF
[540298.407638] acpi LNXPOWER:04: Turning OFF
[540298.407757] acpi LNXPOWER:03: Turning OFF
[540298.407845] PM: Image restored successfully.
[540298.407919] PM: Basic memory bitmaps freed
[540298.407924] OOM killer enabled.
[540298.407925] Restarting tasks ...
[540298.408004] usb 1-7: USB disconnect, device number 46
[540298.410607] done.
[540298.459663] video LNXVIDEO:01: Restoring backlight state
[540298.576213] usb 1-7: new full-speed USB device number 49 using xhci_hcd
[540300.113679] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[540300.114140] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[540300.115485] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540300.824089] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[540300.875167] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540301.650422] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[540301.702054] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540302.148284] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540307.064722] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[540311.949362] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[540311.986995] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[540311.992277] wlp2s0: authenticated
[540311.999507] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[540312.002189] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[540312.004526] wlp2s0: associated
[540312.004566] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[540312.013730] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[547497.946612] a.out[16002]: segfault at 7fff91bcefe8 ip 000055cfb54e9a89 sp 00007fff91bcefd0 error 6 in a.out[55cfb54e8000+4000]
[570589.681480] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[570594.801486] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[570595.967879] wlp2s0: authenticate with 24:de:c6:52:ca:58
[570596.008702] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[570596.010290] wlp2s0: authenticated
[570596.011361] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[570596.014299] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[570596.016556] wlp2s0: associated
[570596.103529] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[570633.143900] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[570633.156310] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[570633.193565] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[570633.195155] wlp2s0: authenticated
[570633.198017] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[570633.201655] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[570633.204799] wlp2s0: associated
[570633.238274] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[587852.224905] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[587852.272944] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[588194.079781] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[588261.935015] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[588266.818578] wlp2s0: authenticate with 24:de:c6:52:ca:58
[588266.858979] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[588266.860880] wlp2s0: authenticated
[588266.865198] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[588266.867945] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[588266.870265] wlp2s0: associated
[588266.870335] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[588266.961734] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[588844.122946] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[588844.132595] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[588844.170797] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[588844.172532] wlp2s0: authenticated
[588844.178450] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[588844.181475] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[588844.184083] wlp2s0: associated
[588844.202220] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[615075.654756] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[615075.673118] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615075.812000] PM: Hibernation mode set to 'platform'
[615076.865175] PM: Syncing filesystems ...
[615077.357666] PM: done.
[615077.357669] Freezing user space processes ... (elapsed 0.002 seconds) done.
[615077.359680] OOM killer disabled.
[615077.359944] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[615077.359945] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[615077.359947] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[615077.359951] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[615077.359952] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[615077.360088] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[615077.361686] PM: Basic memory bitmaps created
[615077.361999] PM: Preallocating image memory... done (allocated 1603430 pages)
[615096.482751] PM: Allocated 6413720 kbytes in 19.12 seconds (335.44 MB/s)
[615096.482752] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[615096.484318] Suspending console(s) (use no_console_suspend to debug)
[615096.897987] PM: freeze of devices complete after 413.666 msecs
[615096.898315] PM: late freeze of devices complete after 0.325 msecs
[615096.914345] PM: noirq freeze of devices complete after 16.027 msecs
[615096.914769] ACPI: Preparing to enter system sleep state S4
[615096.994369] ACPI: EC: event blocked
[615096.994369] ACPI: EC: EC stopped
[615096.994370] PM: Saving platform NVS memory
[615096.997639] Disabling non-boot CPUs ...
[615097.015682] smpboot: CPU 1 is now offline
[615097.055678] smpboot: CPU 2 is now offline
[615097.085638] smpboot: CPU 3 is now offline
[615097.125675] smpboot: CPU 4 is now offline
[615097.155585] smpboot: CPU 5 is now offline
[615097.192210] smpboot: CPU 6 is now offline
[615097.208858] smpboot: CPU 7 is now offline
[615097.210325] PM: Creating hibernation image:
[615097.353870] PM: Need to copy 1605144 pages
[615097.353871] PM: Normal pages needed: 1605144 + 1024, available pages: 2578509
[615097.211031] PM: Restoring platform NVS memory
[615097.211508] ACPI: EC: EC started
[615097.212214] Suspended for 16916.574 seconds
[615097.212246] Enabling non-boot CPUs ...
[615097.212281] x86: Booting SMP configuration:
[615097.212282] smpboot: Booting Node 0 Processor 1 APIC 0x2
[615097.212802] cache: parent cpu1 should not be sleeping
[615097.212909] CPU1 is up
[615097.212922] smpboot: Booting Node 0 Processor 2 APIC 0x4
[615097.213439] cache: parent cpu2 should not be sleeping
[615097.213552] CPU2 is up
[615097.213564] smpboot: Booting Node 0 Processor 3 APIC 0x6
[615097.214079] cache: parent cpu3 should not be sleeping
[615097.214198] CPU3 is up
[615097.214209] smpboot: Booting Node 0 Processor 4 APIC 0x1
[615097.214816] cache: parent cpu4 should not be sleeping
[615097.214945] CPU4 is up
[615097.214961] smpboot: Booting Node 0 Processor 5 APIC 0x3
[615097.215476] cache: parent cpu5 should not be sleeping
[615097.215607] CPU5 is up
[615097.215619] smpboot: Booting Node 0 Processor 6 APIC 0x5
[615097.216164] cache: parent cpu6 should not be sleeping
[615097.216313] CPU6 is up
[615097.216324] smpboot: Booting Node 0 Processor 7 APIC 0x7
[615097.216854] cache: parent cpu7 should not be sleeping
[615097.217014] CPU7 is up
[615097.223653] ACPI: Waking up from system sleep state S4
[615097.274061] PM: noirq restore of devices complete after 15.103 msecs
[615097.274390] PM: early restore of devices complete after 0.299 msecs
[615097.409336] usb usb1: root hub lost power or was reset
[615097.409337] usb usb2: root hub lost power or was reset
[615097.409386] ACPI: EC: event unblocked
[615097.418139] sd 3:0:0:0: [sda] Starting disk
[615097.747400] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[615097.754785] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[615097.755217] ata2: SATA link down (SStatus 4 SControl 300)
[615097.755237] ata3: SATA link down (SStatus 4 SControl 300)
[615097.757225] ata4.00: configured for UDMA/133
[615097.990862] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[615098.075498] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[615098.104294] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[615098.234188] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[615098.477518] usb 1-7: reset full-speed USB device number 49 using xhci_hcd
[615098.608795] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[615098.608800] PM: Device 1-7 failed to restore async: error -32
[615098.697527] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[615098.811940] PM: restore of devices complete after 1402.687 msecs
[615098.812306] usb 1-10:1.0: rebind failed: -517
[615098.812309] usb 1-10:1.1: rebind failed: -517
[615098.812697] acpi LNXPOWER:16: Turning OFF
[615098.812786] acpi LNXPOWER:15: Turning OFF
[615098.812873] acpi LNXPOWER:14: Turning OFF
[615098.812960] acpi LNXPOWER:13: Turning OFF
[615098.813046] acpi LNXPOWER:12: Turning OFF
[615098.813131] acpi LNXPOWER:11: Turning OFF
[615098.813215] acpi LNXPOWER:10: Turning OFF
[615098.813302] acpi LNXPOWER:0f: Turning OFF
[615098.813388] acpi LNXPOWER:0e: Turning OFF
[615098.813473] acpi LNXPOWER:0d: Turning OFF
[615098.813578] acpi LNXPOWER:0c: Turning OFF
[615098.813674] acpi LNXPOWER:0b: Turning OFF
[615098.813771] acpi LNXPOWER:0a: Turning OFF
[615098.813867] acpi LNXPOWER:09: Turning OFF
[615098.813964] acpi LNXPOWER:08: Turning OFF
[615098.814082] acpi LNXPOWER:07: Turning OFF
[615098.814179] acpi LNXPOWER:06: Turning OFF
[615098.814274] acpi LNXPOWER:05: Turning OFF
[615098.814369] acpi LNXPOWER:04: Turning OFF
[615098.814464] acpi LNXPOWER:03: Turning OFF
[615098.814535] PM: Image restored successfully.
[615098.814602] PM: Basic memory bitmaps freed
[615098.814606] OOM killer enabled.
[615098.814607] Restarting tasks ...
[615098.814682] usb 1-7: USB disconnect, device number 49
[615098.816044] done.
[615098.864166] video LNXVIDEO:01: Restoring backlight state
[615098.927340] usb 1-7: new full-speed USB device number 50 using xhci_hcd
[615122.681934] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[615122.682800] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[615125.197862] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615125.897918] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[615125.948971] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615127.041338] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[615127.092901] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615153.085929] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615158.195970] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[615163.527837] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[615163.565029] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[615163.566575] wlp2s0: authenticated
[615163.577323] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[615163.579971] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[615163.582158] wlp2s0: associated
[615163.582201] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[615163.649977] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[645472.445982] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[645477.565973] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[645478.546929] wlp2s0: authenticate with 24:de:c6:52:ca:58
[645478.587829] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[645478.589409] wlp2s0: authenticated
[645478.592549] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[645478.595316] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[645478.597753] wlp2s0: associated
[645478.622163] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[645491.065546] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[645491.074835] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[645491.112330] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[645491.114007] wlp2s0: authenticated
[645491.119181] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[645491.122682] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[645491.124990] wlp2s0: associated
[645491.129953] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[664211.044753] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[664211.054192] wlp2s0: authenticate with 24:de:c6:52:ca:58
[664211.094981] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[664211.096535] wlp2s0: authenticated
[664211.102866] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[664211.105724] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[664211.108116] wlp2s0: associated
[664211.139323] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[664248.158542] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[664248.168168] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[664248.205939] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[664248.207531] wlp2s0: authenticated
[664248.214866] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[664248.219123] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[664248.221719] wlp2s0: associated
[664248.304177] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[675732.233625] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[675732.242285] wlp2s0: authenticate with 24:de:c6:52:ca:58
[675732.282519] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[675732.284364] wlp2s0: authenticated
[675732.291014] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[675732.293673] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[675732.295850] wlp2s0: associated
[675732.318135] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[675769.340032] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[675769.349340] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[675769.386705] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[675769.390122] wlp2s0: authenticated
[675769.394359] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[675769.397170] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[675769.399609] wlp2s0: associated
[675769.468807] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[680049.028511] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[680049.047539] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680049.431033] PM: Hibernation mode set to 'platform'
[680050.473077] PM: Syncing filesystems ...
[680051.516691] PM: done.
[680051.516694] Freezing user space processes ... (elapsed 0.001 seconds) done.
[680051.518603] OOM killer disabled.
[680051.518889] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[680051.518891] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[680051.518893] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[680051.518896] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[680051.518898] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[680051.519046] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[680051.520753] PM: Basic memory bitmaps created
[680051.521093] PM: Preallocating image memory... done (allocated 1641710 pages)
[680053.031104] PM: Allocated 6566840 kbytes in 1.51 seconds (4348.90 MB/s)
[680053.031105] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[680053.032490] Suspending console(s) (use no_console_suspend to debug)
[680053.396244] PM: freeze of devices complete after 363.752 msecs
[680053.396683] PM: late freeze of devices complete after 0.437 msecs
[680053.410382] PM: noirq freeze of devices complete after 13.698 msecs
[680053.410637] ACPI: Preparing to enter system sleep state S4
[680053.490440] ACPI: EC: event blocked
[680053.490441] ACPI: EC: EC stopped
[680053.490441] PM: Saving platform NVS memory
[680053.493712] Disabling non-boot CPUs ...
[680053.521736] smpboot: CPU 1 is now offline
[680053.541708] smpboot: CPU 2 is now offline
[680053.571754] smpboot: CPU 3 is now offline
[680053.592362] smpboot: CPU 4 is now offline
[680053.621613] smpboot: CPU 5 is now offline
[680053.651692] smpboot: CPU 6 is now offline
[680053.681681] smpboot: CPU 7 is now offline
[680053.683207] PM: Creating hibernation image:
[680053.822569] PM: Need to copy 1628665 pages
[680053.822570] PM: Normal pages needed: 1628665 + 1024, available pages: 2554989
[680053.683913] PM: Restoring platform NVS memory
[680053.684399] ACPI: EC: EC started
[680053.685106] Suspended for 31505.526 seconds
[680053.685135] Enabling non-boot CPUs ...
[680053.685170] x86: Booting SMP configuration:
[680053.685171] smpboot: Booting Node 0 Processor 1 APIC 0x2
[680053.685690] cache: parent cpu1 should not be sleeping
[680053.685797] CPU1 is up
[680053.685811] smpboot: Booting Node 0 Processor 2 APIC 0x4
[680053.686326] cache: parent cpu2 should not be sleeping
[680053.686437] CPU2 is up
[680053.686449] smpboot: Booting Node 0 Processor 3 APIC 0x6
[680053.686967] cache: parent cpu3 should not be sleeping
[680053.687086] CPU3 is up
[680053.687099] smpboot: Booting Node 0 Processor 4 APIC 0x1
[680053.687701] cache: parent cpu4 should not be sleeping
[680053.687830] CPU4 is up
[680053.687847] smpboot: Booting Node 0 Processor 5 APIC 0x3
[680053.688363] cache: parent cpu5 should not be sleeping
[680053.688497] CPU5 is up
[680053.688509] smpboot: Booting Node 0 Processor 6 APIC 0x5
[680053.689052] cache: parent cpu6 should not be sleeping
[680053.689191] CPU6 is up
[680053.689202] smpboot: Booting Node 0 Processor 7 APIC 0x7
[680053.689730] cache: parent cpu7 should not be sleeping
[680053.689876] CPU7 is up
[680053.696509] ACPI: Waking up from system sleep state S4
[680053.750149] PM: noirq restore of devices complete after 14.975 msecs
[680053.750519] PM: early restore of devices complete after 0.335 msecs
[680053.898302] usb usb1: root hub lost power or was reset
[680053.898303] usb usb2: root hub lost power or was reset
[680053.898338] ACPI: EC: event unblocked
[680053.908878] sd 3:0:0:0: [sda] Starting disk
[680054.236831] usb 1-7: reset full-speed USB device number 50 using xhci_hcd
[680054.240953] ata3: SATA link down (SStatus 4 SControl 300)
[680054.240992] ata2: SATA link down (SStatus 4 SControl 300)
[680054.241026] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[680054.243545] ata4.00: configured for UDMA/133
[680054.368876] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[680054.368884] PM: Device 1-7 failed to restore async: error -32
[680054.480261] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[680054.566042] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[680054.595271] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[680054.723609] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[680054.966967] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[680055.186975] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[680055.301487] PM: restore of devices complete after 1403.249 msecs
[680055.301937] usb 1-10:1.0: rebind failed: -517
[680055.301940] usb 1-10:1.1: rebind failed: -517
[680055.302450] acpi LNXPOWER:16: Turning OFF
[680055.302574] acpi LNXPOWER:15: Turning OFF
[680055.302694] acpi LNXPOWER:14: Turning OFF
[680055.302814] acpi LNXPOWER:13: Turning OFF
[680055.302932] acpi LNXPOWER:12: Turning OFF
[680055.303049] acpi LNXPOWER:11: Turning OFF
[680055.303167] acpi LNXPOWER:10: Turning OFF
[680055.303286] acpi LNXPOWER:0f: Turning OFF
[680055.303405] acpi LNXPOWER:0e: Turning OFF
[680055.303551] acpi LNXPOWER:0d: Turning OFF
[680055.303671] acpi LNXPOWER:0c: Turning OFF
[680055.303790] acpi LNXPOWER:0b: Turning OFF
[680055.303908] acpi LNXPOWER:0a: Turning OFF
[680055.304027] acpi LNXPOWER:09: Turning OFF
[680055.304145] acpi LNXPOWER:08: Turning OFF
[680055.304263] acpi LNXPOWER:07: Turning OFF
[680055.304380] acpi LNXPOWER:06: Turning OFF
[680055.304498] acpi LNXPOWER:05: Turning OFF
[680055.304614] acpi LNXPOWER:04: Turning OFF
[680055.304733] acpi LNXPOWER:03: Turning OFF
[680055.304819] PM: Image restored successfully.
[680055.304902] PM: Basic memory bitmaps freed
[680055.304908] OOM killer enabled.
[680055.304909] Restarting tasks ...
[680055.305008] usb 1-7: USB disconnect, device number 50
[680055.306319] done.
[680055.353586] video LNXVIDEO:01: Restoring backlight state
[680055.473502] usb 1-7: new full-speed USB device number 51 using xhci_hcd
[680062.437153] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[680062.485683] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[680062.733086] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680063.437452] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[680063.490285] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680064.267563] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[680064.320662] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680065.451224] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680070.327434] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[680075.229029] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[680075.266205] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[680075.267884] wlp2s0: authenticated
[680075.276756] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[680075.281512] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[680075.283742] wlp2s0: associated
[680075.283762] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[680075.303145] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[710480.865368] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[710485.985318] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[710487.016749] wlp2s0: authenticate with 24:de:c6:52:ca:58
[710487.056949] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[710487.058499] wlp2s0: authenticated
[710487.061909] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[710487.064622] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[710487.066901] wlp2s0: associated
[710487.140914] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[710523.032800] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[710523.041454] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[710523.079016] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[710523.081214] wlp2s0: authenticated
[710523.085254] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[710523.088062] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[710523.092037] wlp2s0: associated
[710523.116737] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[723224.578737] wlp2s0: deauthenticated from 24:de:c6:52:b9:c8 (Reason: 3=DEAUTH_LEAVING)
[723225.594203] wlp2s0: authenticate with 24:de:c6:52:ca:58
[723225.634493] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[723225.636138] wlp2s0: authenticated
[723225.639892] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[723225.643121] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[723225.645499] wlp2s0: associated
[723225.685938] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[723234.112634] wlp2s0: deauthenticated from 24:de:c6:52:ca:58 (Reason: 3=DEAUTH_LEAVING)
[723235.136595] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[723235.187333] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[723235.192032] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 2/3)
[723235.296599] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 3/3)
[723235.300018] wlp2s0: authenticated
[723235.303282] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[723235.309241] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[723235.311883] wlp2s0: associated
[723235.411597] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[723238.480977] wlp2s0: deauthenticating from 24:de:c6:52:b9:c0 by local choice (Reason: 17=IE_DIFFERENT)
[723239.258466] wlp2s0: authenticate with 24:de:c6:52:ca:50
[723239.308264] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[723239.310115] wlp2s0: authenticated
[723239.313223] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[723239.319760] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[723239.322209] wlp2s0: associated
[723239.387919] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[723240.089941] wlp2s0: deauthenticating from 24:de:c6:52:ca:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[723240.115314] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[723245.159682] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[723250.024102] wlp2s0: authenticate with 24:de:c6:52:ca:50
[723250.074250] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[723250.076400] wlp2s0: authenticated
[723250.079902] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[723250.083534] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[723250.085701] wlp2s0: associated
[723250.085726] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[723250.140261] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[723275.094397] wlp2s0: disconnect from AP 24:de:c6:52:ca:50 for new auth to 24:de:c6:52:b9:c8
[723275.103312] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[723275.141312] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[723275.143097] wlp2s0: authenticated
[723275.146927] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[723275.150273] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[723275.152518] wlp2s0: associated
[723275.249035] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[724588.979132] wlp2s0: deauthenticated from 24:de:c6:52:b9:c8 (Reason: 3=DEAUTH_LEAVING)
[724589.957109] wlp2s0: authenticate with 24:de:c6:52:ca:58
[724589.998061] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[724589.999600] wlp2s0: authenticated
[724590.003009] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[724590.005990] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[724590.008447] wlp2s0: associated
[724590.010571] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[724596.181552] wlp2s0: deauthenticated from 24:de:c6:52:ca:58 (Reason: 3=DEAUTH_LEAVING)
[724597.210245] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[724597.261580] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[724597.263531] wlp2s0: authenticated
[724597.266345] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[724597.271430] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=2)
[724597.273973] wlp2s0: associated
[724597.372589] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[724599.528171] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 3=DEAUTH_LEAVING)
[724600.557806] wlp2s0: authenticate with 24:de:c6:52:ca:50
[724600.608411] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[724600.610214] wlp2s0: authenticated
[724600.616321] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[724600.623544] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[724600.625671] wlp2s0: associated
[724600.719896] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[724602.025520] wlp2s0: deauthenticating from 24:de:c6:52:ca:50 by local choice (Reason: 17=IE_DIFFERENT)
[724603.006799] wlp2s0: authenticate with 24:de:c6:52:b6:80
[724603.090256] wlp2s0: send auth to 24:de:c6:52:b6:80 (try 1/3)
[724603.092319] wlp2s0: authenticated
[724603.096340] wlp2s0: associate with 24:de:c6:52:b6:80 (try 1/3)
[724603.100317] wlp2s0: RX AssocResp from 24:de:c6:52:b6:80 (capab=0x1431 status=0 aid=1)
[724603.102674] wlp2s0: associated
[724603.167971] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b6:80
[724640.310590] wlp2s0: disconnect from AP 24:de:c6:52:b6:80 for new auth to 24:de:c6:52:b9:c8
[724640.321008] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[724640.359007] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[724640.360967] wlp2s0: authenticated
[724640.362990] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[724640.365782] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[724640.367951] wlp2s0: associated
[724640.375066] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[753568.739179] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[753568.748119] wlp2s0: authenticate with 24:de:c6:52:ca:58
[753568.788957] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[753568.791054] wlp2s0: authenticated
[753568.795048] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[753568.797760] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[753568.800427] wlp2s0: associated
[753568.870840] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[753605.911156] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[753605.921139] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[753605.959010] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[753605.960591] wlp2s0: authenticated
[753605.965041] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[753605.967610] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=4)
[753605.969975] wlp2s0: associated
[753605.993348] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[783807.244484] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:b9:c0
[783807.256778] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[783807.307560] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[783807.309388] wlp2s0: authenticated
[783807.313557] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[783807.370754] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=2)
[783807.373278] wlp2s0: associated
[783807.382680] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[783840.262655] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 3=DEAUTH_LEAVING)
[783841.343528] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[783841.381016] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[783841.382554] wlp2s0: authenticated
[783841.383577] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[783841.386280] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[783841.388569] wlp2s0: associated
[783841.411625] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[814049.351658] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:b9:c0
[814049.360216] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[814049.411244] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[814049.413012] wlp2s0: authenticated
[814049.418744] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[814049.474745] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[814049.477251] wlp2s0: associated
[814049.554557] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[814077.865989] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[814077.939195] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[814077.990368] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[814077.992302] wlp2s0: 24:de:c6:52:b9:c0 denied authentication (status 17)
[814080.100259] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[814080.137982] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[814080.139891] wlp2s0: authenticated
[814080.142097] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[814080.144872] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[814080.147226] wlp2s0: associated
[814080.204216] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[819446.633835] wlp2s0: deauthenticated from 24:de:c6:52:b9:c8 (Reason: 3=DEAUTH_LEAVING)
[819446.948864] wlp2s0: authenticate with 24:de:c6:52:ca:58
[819446.989458] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[819446.990694] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 2/3)
[819446.991987] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 3/3)
[819446.993283] wlp2s0: authentication with 24:de:c6:52:ca:58 timed out
[819447.988326] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[819448.039500] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[819448.041236] wlp2s0: authenticated
[819448.044548] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[819448.048654] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=2)
[819448.050839] wlp2s0: associated
[819448.137753] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[819455.734673] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 3=DEAUTH_LEAVING)
[819456.752262] wlp2s0: authenticate with 24:de:c6:52:ca:50
[819456.802235] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[819456.808145] wlp2s0: authenticated
[819456.811212] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[819456.814951] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[819456.817109] wlp2s0: associated
[819456.822312] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[819460.225558] wlp2s0: deauthenticating from 24:de:c6:52:ca:50 by local choice (Reason: 17=IE_DIFFERENT)
[819461.206791] wlp2s0: authenticate with 24:de:c6:52:bf:f0
[819461.257381] wlp2s0: send auth to 24:de:c6:52:bf:f0 (try 1/3)
[819461.259906] wlp2s0: authenticated
[819461.261246] wlp2s0: associate with 24:de:c6:52:bf:f0 (try 1/3)
[819461.270513] wlp2s0: RX AssocResp from 24:de:c6:52:bf:f0 (capab=0x1431 status=0 aid=2)
[819461.272752] wlp2s0: associated
[819461.336167] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:bf:f0
[819462.079268] wlp2s0: deauthenticating from 24:de:c6:52:bf:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[819462.114200] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[819467.061304] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[819471.946774] wlp2s0: authenticate with 24:de:c6:52:b6:80
[819472.033474] wlp2s0: send auth to 24:de:c6:52:b6:80 (try 1/3)
[819472.035409] wlp2s0: authenticated
[819472.047876] wlp2s0: associate with 24:de:c6:52:b6:80 (try 1/3)
[819472.053715] wlp2s0: RX AssocResp from 24:de:c6:52:b6:80 (capab=0x1431 status=0 aid=3)
[819472.056360] wlp2s0: associated
[819472.056401] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[819472.088761] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b6:80
[819497.046266] wlp2s0: disconnect from AP 24:de:c6:52:b6:80 for new auth to 24:de:c6:52:b9:c8
[819497.056077] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[819497.094709] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[819497.096303] wlp2s0: authenticated
[819497.101212] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[819497.103982] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[819497.106616] wlp2s0: associated
[819497.194228] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[821207.141043] wlp2s0: deauthenticated from 24:de:c6:52:b9:c8 (Reason: 3=DEAUTH_LEAVING)
[821207.968083] wlp2s0: authenticate with 24:de:c6:52:ca:58
[821208.008861] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[821208.010429] wlp2s0: authenticated
[821208.010918] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[821208.014141] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[821208.018271] wlp2s0: associated
[821208.116505] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[821214.484495] wlp2s0: deauthenticated from 24:de:c6:52:ca:58 (Reason: 3=DEAUTH_LEAVING)
[821215.352515] wlp2s0: authenticate with 24:de:c6:52:bf:f0
[821215.402864] wlp2s0: send auth to 24:de:c6:52:bf:f0 (try 1/3)
[821215.405102] wlp2s0: authenticated
[821215.407605] wlp2s0: associate with 24:de:c6:52:bf:f0 (try 1/3)
[821215.411703] wlp2s0: RX AssocResp from 24:de:c6:52:bf:f0 (capab=0x1431 status=0 aid=1)
[821215.414336] wlp2s0: associated
[821215.498012] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:bf:f0
[821217.588676] wlp2s0: deauthenticated from 24:de:c6:52:bf:f0 (Reason: 3=DEAUTH_LEAVING)
[821218.398706] wlp2s0: authenticate with 24:de:c6:52:be:c0
[821218.448318] wlp2s0: send auth to 24:de:c6:52:be:c0 (try 1/3)
[821218.450453] wlp2s0: authenticated
[821218.454267] wlp2s0: associate with 24:de:c6:52:be:c0 (try 1/3)
[821218.458017] wlp2s0: RX AssocResp from 24:de:c6:52:be:c0 (capab=0x1431 status=0 aid=1)
[821218.460761] wlp2s0: associated
[821218.484377] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:be:c0
[821221.070500] wlp2s0: deauthenticating from 24:de:c6:52:be:c0 by local choice (Reason: 17=IE_DIFFERENT)
[821221.847780] wlp2s0: authenticate with 24:de:c6:52:b6:88
[821221.889293] wlp2s0: send auth to 24:de:c6:52:b6:88 (try 1/3)
[821221.890836] wlp2s0: authenticated
[821221.894266] wlp2s0: associate with 24:de:c6:52:b6:88 (try 1/3)
[821221.896981] wlp2s0: RX AssocResp from 24:de:c6:52:b6:88 (capab=0x1411 status=0 aid=1)
[821221.899315] wlp2s0: associated
[821222.072549] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:b6:88
[821222.077250] wlp2s0: deauthenticating from 24:de:c6:52:b6:88 by local choice (Reason: 3=DEAUTH_LEAVING)
[821222.090941] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[821227.055149] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[821231.971392] wlp2s0: authenticate with 24:de:c6:52:bc:f0
[821232.051635] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 1/3)
[821232.056370] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 2/3)
[821232.061100] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 3/3)
[821232.065951] wlp2s0: authentication with 24:de:c6:52:bc:f0 timed out
[821232.845190] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[821232.895818] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[821232.900793] wlp2s0: authenticated
[821232.904246] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[821232.909128] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[821232.911231] wlp2s0: associated
[821232.911251] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[821232.937929] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[821256.410337] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[821256.527203] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[821256.564873] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[821257.301054] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 2/3)
[821258.314262] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 3/3)
[821258.550687] wlp2s0: authenticated
[821258.554321] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[821258.557676] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[821258.560171] wlp2s0: associated
[821258.635303] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[826403.667811] a.out[8287]: segfault at 8 ip 00007fc948bc69fa sp 00007ffe9ce52e98 error 4 in libstdc++.so.6.0.24[7fc948b22000+177000]
[832721.259958] a.out[18865]: segfault at fffffffffffffffc ip 000055e20121345d sp 00007ffe6d757170 error 5 in a.out[55e201212000+5000]
[832817.499697] a.out[19495]: segfault at fffffffffffffffc ip 0000563fa7a5352e sp 00007fffe7845ca0 error 5 in a.out[563fa7a52000+5000]
[832836.963624] a.out[19725]: segfault at fffffffffffffffc ip 000055a6141fa6a7 sp 00007ffc73ffc460 error 5 in a.out[55a6141f9000+5000]
[832861.923975] a.out[19910]: segfault at fffffffffffffffc ip 0000562a6e02c547 sp 00007fff38fdf0c0 error 5 in a.out[562a6e02b000+5000]
[832881.099673] a.out[20117]: segfault at fffffffffffffffc ip 00005638c737652e sp 00007ffdec714e40 error 5 in a.out[5638c7375000+5000]
[833311.251964] a.out[22961]: segfault at fffffffffffffffc ip 000055df7d58c78a sp 00007fff4aa83970 error 5 in a.out[55df7d58b000+5000]
[833572.539932] a.out[24355]: segfault at fffffffffffffffc ip 0000559560209602 sp 00007ffc7cef30d0 error 5 in a.out[559560208000+5000]
[851523.189480] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[851528.309555] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[851529.288881] wlp2s0: authenticate with 24:de:c6:52:ca:58
[851529.328904] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[851529.330493] wlp2s0: authenticated
[851529.336097] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[851529.338903] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[851529.341240] wlp2s0: associated
[851529.441284] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[851549.050860] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[851549.060355] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[851549.098057] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[851549.099629] wlp2s0: authenticated
[851549.106098] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[851549.109503] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[851549.111825] wlp2s0: associated
[851549.115321] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[856939.261958] usb 1-1: new full-speed USB device number 52 using xhci_hcd
[856939.395393] hid-generic 0003:05AC:1392.002A: hiddev0,hidraw2: USB HID v1.11 Device [Apple Inc. Apple Watch Magnetic Charging Cable] on usb-0000:00:14.0-1/input0
[857031.438606] usb 1-4: new high-speed USB device number 53 using xhci_hcd
[857094.126892] usb 1-4: USB disconnect, device number 53
[857108.145216] usb 1-4: new high-speed USB device number 54 using xhci_hcd
[876361.297209] traps: chromium[32428] trap int3 ip:5566981f11c2 sp:7ffe8fd7c2b0 error:0
[881763.398005] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[881768.517974] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[881769.498330] wlp2s0: authenticate with 24:de:c6:52:ca:58
[881769.539205] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[881769.588637] wlp2s0: authenticated
[881769.591283] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[881769.594147] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[881769.596498] wlp2s0: associated
[881769.684693] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[881789.109711] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[881789.118416] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[881789.155188] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[881789.156726] wlp2s0: authenticated
[881789.164607] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[881789.167443] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[881789.169835] wlp2s0: associated
[881789.225630] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[882285.741494] usb 1-4: USB disconnect, device number 54
[882286.201252] usb 1-4: new high-speed USB device number 55 using xhci_hcd
[884168.123921] atkbd serio0: Unknown key pressed (translated set 2, code 0x98 on isa0060/serio0).
[884168.123925] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[884168.127296] atkbd serio0: Unknown key released (translated set 2, code 0x98 on isa0060/serio0).
[884168.127300] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[884168.237610] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[884168.255001] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884168.346714] PM: Syncing filesystems ... done.
[884168.871121] PM: Preparing system for sleep (mem)
[884169.804188] Freezing user space processes ... (elapsed 0.031 seconds) done.
[884169.835817] OOM killer disabled.
[884169.835817] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[884169.836935] PM: Suspending system (mem)
[884169.836964] Suspending console(s) (use no_console_suspend to debug)
[884169.837260] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[884169.851450] sd 3:0:0:0: [sda] Stopping disk
[884170.343553] PM: suspend of devices complete after 506.457 msecs
[884170.344094] PM: late suspend of devices complete after 0.538 msecs
[884170.377672] PM: noirq suspend of devices complete after 33.574 msecs
[884170.378230] ACPI: Preparing to enter system sleep state S3
[884170.424343] ACPI: EC: event blocked
[884170.424344] ACPI: EC: EC stopped
[884170.424345] PM: Saving platform NVS memory
[884170.424390] Disabling non-boot CPUs ...
[884170.452316] smpboot: CPU 1 is now offline
[884170.472292] smpboot: CPU 2 is now offline
[884170.502281] smpboot: CPU 3 is now offline
[884170.525629] smpboot: CPU 4 is now offline
[884170.558838] smpboot: CPU 5 is now offline
[884170.588868] smpboot: CPU 6 is now offline
[884170.605508] smpboot: CPU 7 is now offline
[884170.608523] ACPI: Low-level resume complete
[884170.608614] ACPI: EC: EC started
[884170.608614] PM: Restoring platform NVS memory
[884170.609354] Suspended for 33449.000 seconds
[884170.609409] Enabling non-boot CPUs ...
[884170.609435] x86: Booting SMP configuration:
[884170.609436] smpboot: Booting Node 0 Processor 1 APIC 0x2
[884170.610046] cache: parent cpu1 should not be sleeping
[884170.610079] intel_pstate: Disabling energy efficiency optimization
[884170.610175] CPU1 is up
[884170.610188] smpboot: Booting Node 0 Processor 2 APIC 0x4
[884170.610706] cache: parent cpu2 should not be sleeping
[884170.610818] CPU2 is up
[884170.610831] smpboot: Booting Node 0 Processor 3 APIC 0x6
[884170.611354] cache: parent cpu3 should not be sleeping
[884170.611474] CPU3 is up
[884170.611487] smpboot: Booting Node 0 Processor 4 APIC 0x1
[884170.612097] cache: parent cpu4 should not be sleeping
[884170.612223] CPU4 is up
[884170.612240] smpboot: Booting Node 0 Processor 5 APIC 0x3
[884170.612756] cache: parent cpu5 should not be sleeping
[884170.612889] CPU5 is up
[884170.612902] smpboot: Booting Node 0 Processor 6 APIC 0x5
[884170.613430] cache: parent cpu6 should not be sleeping
[884170.613574] CPU6 is up
[884170.613585] smpboot: Booting Node 0 Processor 7 APIC 0x7
[884170.614116] cache: parent cpu7 should not be sleeping
[884170.614271] CPU7 is up
[884170.620342] ACPI: Waking up from system sleep state S3
[884170.691349] PM: noirq resume of devices complete after 30.530 msecs
[884170.741294] PM: early resume of devices complete after 49.898 msecs
[884170.741438] ACPI: EC: event unblocked
[884170.741750] sd 3:0:0:0: [sda] Starting disk
[884170.811420] xhci_hcd 0000:00:14.0: port 9 resume PLC timeout
[884171.041311] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[884171.074561] ata2: SATA link down (SStatus 4 SControl 300)
[884171.074694] ata3: SATA link down (SStatus 4 SControl 300)
[884171.284849] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[884171.410309] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[884171.438576] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[884171.528175] usb 1-7: reset full-speed USB device number 51 using xhci_hcd
[884171.659941] dpm_run_callback(): usb_dev_resume+0x0/0x20 [usbcore] returns -32
[884171.659944] PM: Device 1-7 failed to resume async: error -32
[884171.748029] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[884171.907323] PM: resume of devices complete after 1166.023 msecs
[884171.907583] usb 1-10:1.0: rebind failed: -517
[884171.907585] usb 1-10:1.1: rebind failed: -517
[884171.908088] acpi LNXPOWER:16: Turning OFF
[884171.908188] acpi LNXPOWER:15: Turning OFF
[884171.908285] acpi LNXPOWER:14: Turning OFF
[884171.908383] acpi LNXPOWER:13: Turning OFF
[884171.908479] acpi LNXPOWER:12: Turning OFF
[884171.908573] acpi LNXPOWER:11: Turning OFF
[884171.908669] acpi LNXPOWER:10: Turning OFF
[884171.908766] acpi LNXPOWER:0f: Turning OFF
[884171.908861] acpi LNXPOWER:0e: Turning OFF
[884171.908957] acpi LNXPOWER:0d: Turning OFF
[884171.909054] acpi LNXPOWER:0c: Turning OFF
[884171.909151] acpi LNXPOWER:0b: Turning OFF
[884171.909246] acpi LNXPOWER:0a: Turning OFF
[884171.909342] acpi LNXPOWER:09: Turning OFF
[884171.909437] acpi LNXPOWER:08: Turning OFF
[884171.909533] acpi LNXPOWER:07: Turning OFF
[884171.909628] acpi LNXPOWER:06: Turning OFF
[884171.909723] acpi LNXPOWER:05: Turning OFF
[884171.909818] acpi LNXPOWER:04: Turning OFF
[884171.909914] acpi LNXPOWER:03: Turning OFF
[884171.909990] PM: Finishing wakeup.
[884171.909991] OOM killer enabled.
[884171.909991] Restarting tasks ... done.
[884171.924441] usb 1-7: USB disconnect, device number 51
[884171.971256] video LNXVIDEO:01: Restoring backlight state
[884172.051123] usb 1-7: new full-speed USB device number 56 using xhci_hcd
[884172.312263] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[884172.312788] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[884172.313620] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884173.012056] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[884173.034884] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884173.797798] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[884173.800784] ata4.00: configured for UDMA/133
[884173.815649] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[884173.829168] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884173.879863] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884174.279527] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[884174.279529] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[884174.330009] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[884178.772118] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884183.634126] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[884183.671497] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[884183.673378] wlp2s0: authenticated
[884183.677786] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[884183.680502] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[884183.682683] wlp2s0: associated
[884183.682714] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[884183.737693] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[884214.381932] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[884214.396751] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884214.491621] PM: Hibernation mode set to 'platform'
[884215.380930] PM: Syncing filesystems ...
[884216.300016] PM: done.
[884216.300017] Freezing user space processes ... (elapsed 0.001 seconds) done.
[884216.301205] OOM killer disabled.
[884216.301339] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[884216.301340] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[884216.301340] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[884216.301342] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[884216.301343] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[884216.301404] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[884216.302142] PM: Basic memory bitmaps created
[884216.302331] PM: Preallocating image memory... done (allocated 1602180 pages)
[884216.662637] PM: Allocated 6408720 kbytes in 0.36 seconds (17802.00 MB/s)
[884216.662638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[884216.664096] Suspending console(s) (use no_console_suspend to debug)
[884217.018455] PM: freeze of devices complete after 354.356 msecs
[884217.018903] PM: late freeze of devices complete after 0.446 msecs
[884217.034563] PM: noirq freeze of devices complete after 15.657 msecs
[884217.035118] ACPI: Preparing to enter system sleep state S4
[884217.114557] ACPI: EC: event blocked
[884217.114558] ACPI: EC: EC stopped
[884217.114558] PM: Saving platform NVS memory
[884217.117850] Disabling non-boot CPUs ...
[884217.145855] smpboot: CPU 1 is now offline
[884217.185837] smpboot: CPU 2 is now offline
[884217.205857] smpboot: CPU 3 is now offline
[884217.236339] smpboot: CPU 4 is now offline
[884217.265719] smpboot: CPU 5 is now offline
[884217.292381] smpboot: CPU 6 is now offline
[884217.319032] smpboot: CPU 7 is now offline
[884217.320497] PM: Creating hibernation image:
[884217.492223] PM: Need to copy 1604655 pages
[884217.492224] PM: Normal pages needed: 1604655 + 1024, available pages: 2579001
[884217.321204] PM: Restoring platform NVS memory
[884217.321686] ACPI: EC: EC started
[884217.322393] Suspended for 4408.290 seconds
[884217.322421] Enabling non-boot CPUs ...
[884217.322462] x86: Booting SMP configuration:
[884217.322463] smpboot: Booting Node 0 Processor 1 APIC 0x2
[884217.323002] cache: parent cpu1 should not be sleeping
[884217.323108] CPU1 is up
[884217.323121] smpboot: Booting Node 0 Processor 2 APIC 0x4
[884217.323658] cache: parent cpu2 should not be sleeping
[884217.323773] CPU2 is up
[884217.323786] smpboot: Booting Node 0 Processor 3 APIC 0x6
[884217.324324] cache: parent cpu3 should not be sleeping
[884217.324443] CPU3 is up
[884217.324455] smpboot: Booting Node 0 Processor 4 APIC 0x1
[884217.325083] cache: parent cpu4 should not be sleeping
[884217.325210] CPU4 is up
[884217.325228] smpboot: Booting Node 0 Processor 5 APIC 0x3
[884217.325763] cache: parent cpu5 should not be sleeping
[884217.325895] CPU5 is up
[884217.325908] smpboot: Booting Node 0 Processor 6 APIC 0x5
[884217.326460] cache: parent cpu6 should not be sleeping
[884217.326602] CPU6 is up
[884217.326613] smpboot: Booting Node 0 Processor 7 APIC 0x7
[884217.327164] cache: parent cpu7 should not be sleeping
[884217.327320] CPU7 is up
[884217.333939] ACPI: Waking up from system sleep state S4
[884217.384230] PM: noirq restore of devices complete after 15.158 msecs
[884217.384447] PM: early restore of devices complete after 0.192 msecs
[884217.503514] usb usb1: root hub lost power or was reset
[884217.503515] usb usb2: root hub lost power or was reset
[884217.503552] ACPI: EC: event unblocked
[884217.505277] sd 3:0:0:0: [sda] Starting disk
[884217.835195] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[884217.835213] ata3: SATA link down (SStatus 4 SControl 300)
[884217.835231] ata2: SATA link down (SStatus 4 SControl 300)
[884217.837860] ata4.00: configured for UDMA/133
[884217.840914] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[884218.084349] usb 1-7: reset full-speed USB device number 56 using xhci_hcd
[884218.172930] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[884218.202008] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[884218.216084] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[884218.216093] PM: Device 1-7 failed to restore async: error -32
[884218.327623] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[884218.571023] usb 1-1: reset full-speed USB device number 52 using xhci_hcd
[884218.814372] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[884219.034375] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[884219.149136] PM: restore of devices complete after 1645.695 msecs
[884219.149529] usb 1-10:1.0: rebind failed: -517
[884219.149532] usb 1-10:1.1: rebind failed: -517
[884219.149956] acpi LNXPOWER:16: Turning OFF
[884219.150056] acpi LNXPOWER:15: Turning OFF
[884219.150153] acpi LNXPOWER:14: Turning OFF
[884219.150250] acpi LNXPOWER:13: Turning OFF
[884219.150346] acpi LNXPOWER:12: Turning OFF
[884219.150441] acpi LNXPOWER:11: Turning OFF
[884219.150536] acpi LNXPOWER:10: Turning OFF
[884219.150632] acpi LNXPOWER:0f: Turning OFF
[884219.150728] acpi LNXPOWER:0e: Turning OFF
[884219.150824] acpi LNXPOWER:0d: Turning OFF
[884219.150943] acpi LNXPOWER:0c: Turning OFF
[884219.151040] acpi LNXPOWER:0b: Turning OFF
[884219.151135] acpi LNXPOWER:0a: Turning OFF
[884219.151231] acpi LNXPOWER:09: Turning OFF
[884219.151327] acpi LNXPOWER:08: Turning OFF
[884219.151422] acpi LNXPOWER:07: Turning OFF
[884219.151517] acpi LNXPOWER:06: Turning OFF
[884219.151612] acpi LNXPOWER:05: Turning OFF
[884219.151706] acpi LNXPOWER:04: Turning OFF
[884219.151802] acpi LNXPOWER:03: Turning OFF
[884219.151873] PM: Image restored successfully.
[884219.151935] PM: Basic memory bitmaps freed
[884219.151939] OOM killer enabled.
[884219.151939] Restarting tasks ... done.
[884219.157693] usb 1-7: USB disconnect, device number 56
[884219.211017] video LNXVIDEO:01: Restoring backlight state
[884219.284258] usb 1-7: new full-speed USB device number 57 using xhci_hcd
[884219.539049] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[884219.539535] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[884219.540637] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884220.243314] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[884220.297569] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884221.075737] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[884221.127929] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884221.204236] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884226.093590] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[884230.969270] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[884231.005972] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[884231.007802] wlp2s0: authenticated
[884231.014188] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[884231.017063] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[884231.019507] wlp2s0: associated
[884231.019540] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[884231.051322] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[893635.256703] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[893635.274452] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893635.342932] PM: Hibernation mode set to 'platform'
[893636.242528] PM: Syncing filesystems ...
[893637.119096] PM: done.
[893637.119098] Freezing user space processes ... (elapsed 0.001 seconds) done.
[893637.120720] OOM killer disabled.
[893637.120934] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[893637.120936] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[893637.120937] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[893637.120940] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[893637.120941] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[893637.121052] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[893637.122389] PM: Basic memory bitmaps created
[893637.122684] PM: Preallocating image memory... done (allocated 1498870 pages)
[893637.486710] PM: Allocated 5995480 kbytes in 0.36 seconds (16654.11 MB/s)
[893637.486710] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[893637.488086] Suspending console(s) (use no_console_suspend to debug)
[893637.840692] PM: freeze of devices complete after 352.604 msecs
[893637.841113] PM: late freeze of devices complete after 0.419 msecs
[893637.856082] PM: noirq freeze of devices complete after 14.968 msecs
[893637.856337] ACPI: Preparing to enter system sleep state S4
[893637.936137] ACPI: EC: event blocked
[893637.936138] ACPI: EC: EC stopped
[893637.936138] PM: Saving platform NVS memory
[893637.939382] Disabling non-boot CPUs ...
[893637.967426] smpboot: CPU 1 is now offline
[893637.990747] smpboot: CPU 2 is now offline
[893638.024062] smpboot: CPU 3 is now offline
[893638.054596] smpboot: CPU 4 is now offline
[893638.083967] smpboot: CPU 5 is now offline
[893638.114049] smpboot: CPU 6 is now offline
[893638.140698] smpboot: CPU 7 is now offline
[893638.142250] PM: Creating hibernation image:
[893638.293404] PM: Need to copy 1500257 pages
[893638.293405] PM: Normal pages needed: 1500257 + 1024, available pages: 2683387
[893638.142959] PM: Restoring platform NVS memory
[893638.143414] ACPI: EC: EC started
[893638.144121] Suspended for 7934.180 seconds
[893638.144154] Enabling non-boot CPUs ...
[893638.144185] x86: Booting SMP configuration:
[893638.144186] smpboot: Booting Node 0 Processor 1 APIC 0x2
[893638.144703] cache: parent cpu1 should not be sleeping
[893638.144809] CPU1 is up
[893638.144822] smpboot: Booting Node 0 Processor 2 APIC 0x4
[893638.145341] cache: parent cpu2 should not be sleeping
[893638.145454] CPU2 is up
[893638.145467] smpboot: Booting Node 0 Processor 3 APIC 0x6
[893638.145987] cache: parent cpu3 should not be sleeping
[893638.146103] CPU3 is up
[893638.146116] smpboot: Booting Node 0 Processor 4 APIC 0x1
[893638.146724] cache: parent cpu4 should not be sleeping
[893638.146851] CPU4 is up
[893638.146867] smpboot: Booting Node 0 Processor 5 APIC 0x3
[893638.147380] cache: parent cpu5 should not be sleeping
[893638.147510] CPU5 is up
[893638.147523] smpboot: Booting Node 0 Processor 6 APIC 0x5
[893638.148048] cache: parent cpu6 should not be sleeping
[893638.148191] CPU6 is up
[893638.148202] smpboot: Booting Node 0 Processor 7 APIC 0x7
[893638.148734] cache: parent cpu7 should not be sleeping
[893638.148882] CPU7 is up
[893638.155499] ACPI: Waking up from system sleep state S4
[893638.209157] PM: noirq restore of devices complete after 14.996 msecs
[893638.209551] PM: early restore of devices complete after 0.360 msecs
[893638.337181] usb usb1: root hub lost power or was reset
[893638.337182] usb usb2: root hub lost power or was reset
[893638.337223] ACPI: EC: event unblocked
[893638.347031] sd 3:0:0:0: [sda] Starting disk
[893638.675818] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[893638.679922] ata3: SATA link down (SStatus 4 SControl 300)
[893638.680052] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[893638.680192] ata2: SATA link down (SStatus 4 SControl 300)
[893638.682597] ata4.00: configured for UDMA/133
[893638.919217] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[893639.004237] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[893639.033387] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[893639.162545] usb 1-7: reset full-speed USB device number 57 using xhci_hcd
[893639.294659] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[893639.294669] PM: Device 1-7 failed to restore async: error -32
[893639.405972] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[893639.649277] usb 1-1: reset full-speed USB device number 52 using xhci_hcd
[893639.869311] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[893639.983851] PM: restore of devices complete after 1646.713 msecs
[893639.984311] usb 1-10:1.0: rebind failed: -517
[893639.984314] usb 1-10:1.1: rebind failed: -517
[893639.984827] acpi LNXPOWER:16: Turning OFF
[893639.984951] acpi LNXPOWER:15: Turning OFF
[893639.985071] acpi LNXPOWER:14: Turning OFF
[893639.985191] acpi LNXPOWER:13: Turning OFF
[893639.985310] acpi LNXPOWER:12: Turning OFF
[893639.985427] acpi LNXPOWER:11: Turning OFF
[893639.985544] acpi LNXPOWER:10: Turning OFF
[893639.985664] acpi LNXPOWER:0f: Turning OFF
[893639.985809] acpi LNXPOWER:0e: Turning OFF
[893639.985933] acpi LNXPOWER:0d: Turning OFF
[893639.986053] acpi LNXPOWER:0c: Turning OFF
[893639.986172] acpi LNXPOWER:0b: Turning OFF
[893639.986291] acpi LNXPOWER:0a: Turning OFF
[893639.986409] acpi LNXPOWER:09: Turning OFF
[893639.986528] acpi LNXPOWER:08: Turning OFF
[893639.986646] acpi LNXPOWER:07: Turning OFF
[893639.986764] acpi LNXPOWER:06: Turning OFF
[893639.986882] acpi LNXPOWER:05: Turning OFF
[893639.987000] acpi LNXPOWER:04: Turning OFF
[893639.987119] acpi LNXPOWER:03: Turning OFF
[893639.987206] PM: Image restored successfully.
[893639.987285] PM: Basic memory bitmaps freed
[893639.987291] OOM killer enabled.
[893639.987292] Restarting tasks ...
[893639.987411] usb 1-7: USB disconnect, device number 57
[893639.992525] done.
[893640.046032] video LNXVIDEO:01: Restoring backlight state
[893640.155776] usb 1-7: new full-speed USB device number 58 using xhci_hcd
[893640.390771] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[893640.391274] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[893640.392321] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893641.093899] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[893641.145679] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893641.920726] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[893641.965460] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893642.055877] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893646.939665] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[893651.834997] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[893651.873619] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[893651.875229] wlp2s0: authenticated
[893651.885775] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[893651.888497] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[893651.890869] wlp2s0: associated
[893651.890905] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[893651.923537] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[923941.534341] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[923946.654410] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[923947.671493] wlp2s0: authenticate with 24:de:c6:52:ca:58
[923947.712145] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[923947.713704] wlp2s0: authenticated
[923947.717605] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[923947.720548] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[923947.722604] wlp2s0: associated
[923947.813883] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[923979.118869] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[923979.128141] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[923979.165725] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[923979.167260] wlp2s0: authenticated
[923979.170940] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[923979.173715] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[923979.176082] wlp2s0: associated
[923979.189481] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[949023.828799] usb 1-1: USB disconnect, device number 52
[949059.025982] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:ca:58
[949059.035327] wlp2s0: authenticate with 24:de:c6:52:ca:58
[949059.075881] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[949059.077695] wlp2s0: authenticated
[949059.083592] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[949059.086313] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[949059.088448] wlp2s0: associated
[949059.107725] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[949068.293484] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[949068.302871] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[949068.340269] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[949068.342627] wlp2s0: authenticated
[949068.346924] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[949068.349642] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[949068.351748] wlp2s0: associated
[949068.434402] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[954181.316256] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[954186.436136] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[954187.463717] wlp2s0: authenticate with 24:de:c6:52:ca:58
[954187.504425] wlp2s0: send auth to 24:de:c6:52:ca:58 (try 1/3)
[954187.505988] wlp2s0: authenticated
[954187.509448] wlp2s0: associate with 24:de:c6:52:ca:58 (try 1/3)
[954187.512113] wlp2s0: RX AssocResp from 24:de:c6:52:ca:58 (capab=0x1411 status=0 aid=1)
[954187.514332] wlp2s0: associated
[954187.558808] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 24:de:c6:52:ca:58
[954219.069674] wlp2s0: disconnect from AP 24:de:c6:52:ca:58 for new auth to 24:de:c6:52:b9:c8
[954219.079200] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[954219.116700] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[954219.118223] wlp2s0: authenticated
[954219.126116] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[954219.128876] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[954219.131356] wlp2s0: associated
[954219.201241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[977008.812096] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[977008.831215] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977008.904517] PM: Hibernation mode set to 'platform'
[977009.850418] PM: Syncing filesystems ...
[977010.464790] PM: done.
[977010.464792] Freezing user space processes ... (elapsed 0.001 seconds) done.
[977010.466446] OOM killer disabled.
[977010.466664] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[977010.466665] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[977010.466667] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[977010.466670] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[977010.466671] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[977010.466782] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[977010.468121] PM: Basic memory bitmaps created
[977010.468406] PM: Preallocating image memory... done (allocated 1488637 pages)
[977011.510205] PM: Allocated 5954548 kbytes in 1.04 seconds (5725.52 MB/s)
[977011.510205] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[977011.511620] Suspending console(s) (use no_console_suspend to debug)
[977011.852854] PM: freeze of devices complete after 341.231 msecs
[977011.853381] PM: late freeze of devices complete after 0.525 msecs
[977011.869204] PM: noirq freeze of devices complete after 15.821 msecs
[977011.869458] ACPI: Preparing to enter system sleep state S4
[977011.949253] ACPI: EC: event blocked
[977011.949253] ACPI: EC: EC stopped
[977011.949254] PM: Saving platform NVS memory
[977011.952403] Disabling non-boot CPUs ...
[977011.977231] smpboot: CPU 1 is now offline
[977011.997216] smpboot: CPU 2 is now offline
[977012.027183] smpboot: CPU 3 is now offline
[977012.061039] smpboot: CPU 4 is now offline
[977012.090431] smpboot: CPU 5 is now offline
[977012.123845] smpboot: CPU 6 is now offline
[977012.140437] smpboot: CPU 7 is now offline
[977012.141976] PM: Creating hibernation image:
[977012.282746] PM: Need to copy 1489544 pages
[977012.282747] PM: Normal pages needed: 1489544 + 1024, available pages: 2694105
[977012.142686] PM: Restoring platform NVS memory
[977012.143164] ACPI: EC: EC started
[977012.143872] Suspended for 5194.000 seconds
[977012.143901] Enabling non-boot CPUs ...
[977012.143935] x86: Booting SMP configuration:
[977012.143935] smpboot: Booting Node 0 Processor 1 APIC 0x2
[977012.144455] cache: parent cpu1 should not be sleeping
[977012.144562] CPU1 is up
[977012.144575] smpboot: Booting Node 0 Processor 2 APIC 0x4
[977012.145090] cache: parent cpu2 should not be sleeping
[977012.145204] CPU2 is up
[977012.145217] smpboot: Booting Node 0 Processor 3 APIC 0x6
[977012.145739] cache: parent cpu3 should not be sleeping
[977012.145860] CPU3 is up
[977012.145873] smpboot: Booting Node 0 Processor 4 APIC 0x1
[977012.146473] cache: parent cpu4 should not be sleeping
[977012.146600] CPU4 is up
[977012.146619] smpboot: Booting Node 0 Processor 5 APIC 0x3
[977012.147132] cache: parent cpu5 should not be sleeping
[977012.147264] CPU5 is up
[977012.147277] smpboot: Booting Node 0 Processor 6 APIC 0x5
[977012.147803] cache: parent cpu6 should not be sleeping
[977012.147949] CPU6 is up
[977012.147960] smpboot: Booting Node 0 Processor 7 APIC 0x7
[977012.148510] cache: parent cpu7 should not be sleeping
[977012.148667] CPU7 is up
[977012.155296] ACPI: Waking up from system sleep state S4
[977012.205642] PM: noirq restore of devices complete after 15.168 msecs
[977012.205942] PM: early restore of devices complete after 0.273 msecs
[977012.331992] usb usb1: root hub lost power or was reset
[977012.331993] usb usb2: root hub lost power or was reset
[977012.332038] ACPI: EC: event unblocked
[977012.341475] sd 3:0:0:0: [sda] Starting disk
[977012.668983] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[977012.669326] ata2: SATA link down (SStatus 4 SControl 300)
[977012.669704] ata3: SATA link down (SStatus 4 SControl 300)
[977012.669726] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[977012.672191] ata4.00: configured for UDMA/133
[977012.912424] usb 1-7: reset full-speed USB device number 58 using xhci_hcd
[977013.007083] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[977013.037810] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[977013.044270] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[977013.044278] PM: Device 1-7 failed to restore async: error -32
[977013.155771] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[977013.399107] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[977013.619114] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[977013.733579] PM: restore of devices complete after 1401.626 msecs
[977013.733999] usb 1-10:1.0: rebind failed: -517
[977013.734002] usb 1-10:1.1: rebind failed: -517
[977013.734454] acpi LNXPOWER:16: Turning OFF
[977013.734561] acpi LNXPOWER:15: Turning OFF
[977013.734664] acpi LNXPOWER:14: Turning OFF
[977013.734769] acpi LNXPOWER:13: Turning OFF
[977013.734871] acpi LNXPOWER:12: Turning OFF
[977013.734972] acpi LNXPOWER:11: Turning OFF
[977013.735074] acpi LNXPOWER:10: Turning OFF
[977013.735178] acpi LNXPOWER:0f: Turning OFF
[977013.735281] acpi LNXPOWER:0e: Turning OFF
[977013.735384] acpi LNXPOWER:0d: Turning OFF
[977013.735487] acpi LNXPOWER:0c: Turning OFF
[977013.735619] acpi LNXPOWER:0b: Turning OFF
[977013.735717] acpi LNXPOWER:0a: Turning OFF
[977013.735814] acpi LNXPOWER:09: Turning OFF
[977013.735910] acpi LNXPOWER:08: Turning OFF
[977013.736006] acpi LNXPOWER:07: Turning OFF
[977013.736101] acpi LNXPOWER:06: Turning OFF
[977013.736196] acpi LNXPOWER:05: Turning OFF
[977013.736290] acpi LNXPOWER:04: Turning OFF
[977013.736387] acpi LNXPOWER:03: Turning OFF
[977013.736458] PM: Image restored successfully.
[977013.736517] PM: Basic memory bitmaps freed
[977013.736521] OOM killer enabled.
[977013.736522] Restarting tasks ...
[977013.736613] usb 1-7: USB disconnect, device number 58
[977013.739710] done.
[977013.789185] video LNXVIDEO:01: Restoring backlight state
[977013.908970] usb 1-7: new full-speed USB device number 59 using xhci_hcd
[977014.210484] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[977014.210987] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[977014.211898] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977014.913416] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[977014.964360] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977015.747180] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[977015.799102] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977016.554370] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977021.445149] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[977026.328134] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[977026.365752] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[977026.367312] wlp2s0: authenticated
[977026.375597] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[977026.378348] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[977026.380764] wlp2s0: associated
[977026.380799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[977026.406047] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1007314.110835] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[1007319.230911] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[1007320.211747] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[1007320.262493] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[1007320.264306] wlp2s0: authenticated
[1007320.270756] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[1007320.327048] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=2)
[1007320.329226] wlp2s0: associated
[1007320.419422] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[1007354.079628] wlp2s0: disconnect from AP 24:de:c6:52:b9:c0 for new auth to 24:de:c6:52:b9:c8
[1007354.089695] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1007354.128370] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1007354.130015] wlp2s0: authenticated
[1007354.137420] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1007354.140401] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[1007354.142634] wlp2s0: associated
[1007354.203458] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1013415.657920] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[1013415.675407] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013415.730049] PM: Hibernation mode set to 'platform'
[1013416.594643] PM: Syncing filesystems ...
[1013417.192599] PM: done.
[1013417.192602] Freezing user space processes ... (elapsed 0.001 seconds) done.
[1013417.194514] OOM killer disabled.
[1013417.194828] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[1013417.194830] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[1013417.194832] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[1013417.194836] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[1013417.194838] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[1013417.194999] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[1013417.196848] PM: Basic memory bitmaps created
[1013417.197211] PM: Preallocating image memory... done (allocated 1623743 pages)
[1013417.859190] PM: Allocated 6494972 kbytes in 0.66 seconds (9840.86 MB/s)
[1013417.859190] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[1013417.860603] Suspending console(s) (use no_console_suspend to debug)
[1013418.205425] PM: freeze of devices complete after 344.820 msecs
[1013418.205893] PM: late freeze of devices complete after 0.466 msecs
[1013418.219853] PM: noirq freeze of devices complete after 13.959 msecs
[1013418.220108] ACPI: Preparing to enter system sleep state S4
[1013418.299908] ACPI: EC: event blocked
[1013418.299908] ACPI: EC: EC stopped
[1013418.299909] PM: Saving platform NVS memory
[1013418.303181] Disabling non-boot CPUs ...
[1013418.331185] smpboot: CPU 1 is now offline
[1013418.351182] smpboot: CPU 2 is now offline
[1013418.387854] smpboot: CPU 3 is now offline
[1013418.408357] smpboot: CPU 4 is now offline
[1013418.437784] smpboot: CPU 5 is now offline
[1013418.471076] smpboot: CPU 6 is now offline
[1013418.494390] smpboot: CPU 7 is now offline
[1013418.495867] PM: Creating hibernation image:
[1013418.626354] PM: Need to copy 1624990 pages
[1013418.626355] PM: Normal pages needed: 1624990 + 1024, available pages: 2558664
[1013418.496578] PM: Restoring platform NVS memory
[1013418.497067] ACPI: EC: EC started
[1013418.497773] Suspended for 14212.647 seconds
[1013418.497805] Enabling non-boot CPUs ...
[1013418.497836] x86: Booting SMP configuration:
[1013418.497837] smpboot: Booting Node 0 Processor 1 APIC 0x2
[1013418.498354] cache: parent cpu1 should not be sleeping
[1013418.498458] CPU1 is up
[1013418.498471] smpboot: Booting Node 0 Processor 2 APIC 0x4
[1013418.498988] cache: parent cpu2 should not be sleeping
[1013418.499101] CPU2 is up
[1013418.499114] smpboot: Booting Node 0 Processor 3 APIC 0x6
[1013418.499532] cache: parent cpu3 should not be sleeping
[1013418.499663] CPU3 is up
[1013418.499676] smpboot: Booting Node 0 Processor 4 APIC 0x1
[1013418.500276] cache: parent cpu4 should not be sleeping
[1013418.500403] CPU4 is up
[1013418.500421] smpboot: Booting Node 0 Processor 5 APIC 0x3
[1013418.500932] cache: parent cpu5 should not be sleeping
[1013418.501064] CPU5 is up
[1013418.501076] smpboot: Booting Node 0 Processor 6 APIC 0x5
[1013418.501599] cache: parent cpu6 should not be sleeping
[1013418.501736] CPU6 is up
[1013418.501748] smpboot: Booting Node 0 Processor 7 APIC 0x7
[1013418.502280] cache: parent cpu7 should not be sleeping
[1013418.502428] CPU7 is up
[1013418.509054] ACPI: Waking up from system sleep state S4
[1013418.566298] PM: noirq restore of devices complete after 14.825 msecs
[1013418.566734] PM: early restore of devices complete after 0.398 msecs
[1013418.707190] usb usb1: root hub lost power or was reset
[1013418.707191] usb usb2: root hub lost power or was reset
[1013418.707235] ACPI: EC: event unblocked
[1013418.717423] sd 3:0:0:0: [sda] Starting disk
[1013419.046263] usb 1-7: reset full-speed USB device number 59 using xhci_hcd
[1013419.046841] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[1013419.047153] ata3: SATA link down (SStatus 4 SControl 300)
[1013419.047180] ata2: SATA link down (SStatus 4 SControl 300)
[1013419.049337] ata4.00: configured for UDMA/133
[1013419.178184] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[1013419.178192] PM: Device 1-7 failed to restore async: error -32
[1013419.289734] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[1013419.377957] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[1013419.407162] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[1013419.533083] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[1013419.776417] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[1013419.996423] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[1013420.110863] PM: restore of devices complete after 1403.733 msecs
[1013420.111321] usb 1-10:1.0: rebind failed: -517
[1013420.111325] usb 1-10:1.1: rebind failed: -517
[1013420.111848] acpi LNXPOWER:16: Turning OFF
[1013420.111963] acpi LNXPOWER:15: Turning OFF
[1013420.112074] acpi LNXPOWER:14: Turning OFF
[1013420.112186] acpi LNXPOWER:13: Turning OFF
[1013420.112296] acpi LNXPOWER:12: Turning OFF
[1013420.112405] acpi LNXPOWER:11: Turning OFF
[1013420.112514] acpi LNXPOWER:10: Turning OFF
[1013420.112626] acpi LNXPOWER:0f: Turning OFF
[1013420.112737] acpi LNXPOWER:0e: Turning OFF
[1013420.112848] acpi LNXPOWER:0d: Turning OFF
[1013420.112991] acpi LNXPOWER:0c: Turning OFF
[1013420.113103] acpi LNXPOWER:0b: Turning OFF
[1013420.113213] acpi LNXPOWER:0a: Turning OFF
[1013420.113323] acpi LNXPOWER:09: Turning OFF
[1013420.113433] acpi LNXPOWER:08: Turning OFF
[1013420.113543] acpi LNXPOWER:07: Turning OFF
[1013420.113652] acpi LNXPOWER:06: Turning OFF
[1013420.113761] acpi LNXPOWER:05: Turning OFF
[1013420.113870] acpi LNXPOWER:04: Turning OFF
[1013420.113980] acpi LNXPOWER:03: Turning OFF
[1013420.114061] PM: Image restored successfully.
[1013420.114130] PM: Basic memory bitmaps freed
[1013420.114135] OOM killer enabled.
[1013420.114135] Restarting tasks ... done.
[1013420.124468] usb 1-7: USB disconnect, device number 59
[1013420.173021] video LNXVIDEO:01: Restoring backlight state
[1013420.249636] usb 1-7: new full-speed USB device number 60 using xhci_hcd
[1013420.488186] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1013420.488879] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1013420.490183] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013421.190661] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1013421.239911] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013422.017417] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1013422.062640] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013422.114687] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013426.987685] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1013431.848467] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1013431.885417] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1013431.886969] wlp2s0: authenticated
[1013431.896239] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1013431.899376] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=1)
[1013431.901832] wlp2s0: associated
[1013431.901876] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[1013431.976201] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1014770.801914] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[1014770.818261] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014770.891085] PM: Hibernation mode set to 'platform'
[1014771.799106] PM: Syncing filesystems ...
[1014772.854060] PM: done.
[1014772.854063] Freezing user space processes ... (elapsed 0.001 seconds) done.
[1014772.855832] OOM killer disabled.
[1014772.856083] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[1014772.856085] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[1014772.856086] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[1014772.856090] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[1014772.856091] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[1014772.856218] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[1014772.857691] PM: Basic memory bitmaps created
[1014772.857990] PM: Preallocating image memory... done (allocated 1622875 pages)
[1014773.521268] PM: Allocated 6491500 kbytes in 0.66 seconds (9835.60 MB/s)
[1014773.521269] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[1014773.522700] Suspending console(s) (use no_console_suspend to debug)
[1014773.885849] PM: freeze of devices complete after 363.147 msecs
[1014773.886367] PM: late freeze of devices complete after 0.516 msecs
[1014773.902760] PM: noirq freeze of devices complete after 16.391 msecs
[1014773.903015] ACPI: Preparing to enter system sleep state S4
[1014773.982808] ACPI: EC: event blocked
[1014773.982808] ACPI: EC: EC stopped
[1014773.982809] PM: Saving platform NVS memory
[1014773.986095] Disabling non-boot CPUs ...
[1014774.014107] smpboot: CPU 1 is now offline
[1014774.034092] smpboot: CPU 2 is now offline
[1014774.067401] smpboot: CPU 3 is now offline
[1014774.087925] smpboot: CPU 4 is now offline
[1014774.117306] smpboot: CPU 5 is now offline
[1014774.154032] smpboot: CPU 6 is now offline
[1014774.180710] smpboot: CPU 7 is now offline
[1014774.182263] PM: Creating hibernation image:
[1014774.336660] PM: Need to copy 1624233 pages
[1014774.336662] PM: Normal pages needed: 1624233 + 1024, available pages: 2559413
[1014774.182968] PM: Restoring platform NVS memory
[1014774.183442] ACPI: EC: EC started
[1014774.184148] Suspended for 3934.316 seconds
[1014774.184180] Enabling non-boot CPUs ...
[1014774.184215] x86: Booting SMP configuration:
[1014774.184215] smpboot: Booting Node 0 Processor 1 APIC 0x2
[1014774.184732] cache: parent cpu1 should not be sleeping
[1014774.184838] CPU1 is up
[1014774.184851] smpboot: Booting Node 0 Processor 2 APIC 0x4
[1014774.185373] cache: parent cpu2 should not be sleeping
[1014774.185485] CPU2 is up
[1014774.185498] smpboot: Booting Node 0 Processor 3 APIC 0x6
[1014774.186016] cache: parent cpu3 should not be sleeping
[1014774.186134] CPU3 is up
[1014774.186147] smpboot: Booting Node 0 Processor 4 APIC 0x1
[1014774.186743] cache: parent cpu4 should not be sleeping
[1014774.186873] CPU4 is up
[1014774.186890] smpboot: Booting Node 0 Processor 5 APIC 0x3
[1014774.187311] cache: parent cpu5 should not be sleeping
[1014774.187446] CPU5 is up
[1014774.187459] smpboot: Booting Node 0 Processor 6 APIC 0x5
[1014774.187982] cache: parent cpu6 should not be sleeping
[1014774.188129] CPU6 is up
[1014774.188140] smpboot: Booting Node 0 Processor 7 APIC 0x7
[1014774.188666] cache: parent cpu7 should not be sleeping
[1014774.188826] CPU7 is up
[1014774.195463] ACPI: Waking up from system sleep state S4
[1014774.252524] PM: noirq restore of devices complete after 14.856 msecs
[1014774.252961] PM: early restore of devices complete after 0.400 msecs
[1014774.389283] usb usb1: root hub lost power or was reset
[1014774.389285] usb usb2: root hub lost power or was reset
[1014774.389324] ACPI: EC: event unblocked
[1014774.396004] sd 3:0:0:0: [sda] Starting disk
[1014774.725823] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[1014774.726530] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[1014774.726940] ata3: SATA link down (SStatus 4 SControl 300)
[1014774.726961] ata2: SATA link down (SStatus 4 SControl 300)
[1014774.728979] ata4.00: configured for UDMA/133
[1014774.969293] usb 1-7: reset full-speed USB device number 60 using xhci_hcd
[1014775.057943] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[1014775.087170] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[1014775.101270] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[1014775.101279] PM: Device 1-7 failed to restore async: error -32
[1014775.212561] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[1014775.455994] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[1014775.675997] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[1014775.790475] PM: restore of devices complete after 1401.272 msecs
[1014775.790938] usb 1-10:1.0: rebind failed: -517
[1014775.790942] usb 1-10:1.1: rebind failed: -517
[1014775.791455] acpi LNXPOWER:16: Turning OFF
[1014775.791580] acpi LNXPOWER:15: Turning OFF
[1014775.791700] acpi LNXPOWER:14: Turning OFF
[1014775.791819] acpi LNXPOWER:13: Turning OFF
[1014775.791937] acpi LNXPOWER:12: Turning OFF
[1014775.792056] acpi LNXPOWER:11: Turning OFF
[1014775.792173] acpi LNXPOWER:10: Turning OFF
[1014775.792293] acpi LNXPOWER:0f: Turning OFF
[1014775.792412] acpi LNXPOWER:0e: Turning OFF
[1014775.792559] acpi LNXPOWER:0d: Turning OFF
[1014775.792680] acpi LNXPOWER:0c: Turning OFF
[1014775.792799] acpi LNXPOWER:0b: Turning OFF
[1014775.792916] acpi LNXPOWER:0a: Turning OFF
[1014775.793035] acpi LNXPOWER:09: Turning OFF
[1014775.793153] acpi LNXPOWER:08: Turning OFF
[1014775.793271] acpi LNXPOWER:07: Turning OFF
[1014775.793388] acpi LNXPOWER:06: Turning OFF
[1014775.793505] acpi LNXPOWER:05: Turning OFF
[1014775.793633] acpi LNXPOWER:04: Turning OFF
[1014775.793742] acpi LNXPOWER:03: Turning OFF
[1014775.793823] PM: Image restored successfully.
[1014775.793891] PM: Basic memory bitmaps freed
[1014775.793896] OOM killer enabled.
[1014775.793897] Restarting tasks ... done.
[1014775.799028] usb 1-7: USB disconnect, device number 60
[1014775.849430] video LNXVIDEO:01: Restoring backlight state
[1014775.922509] usb 1-7: new full-speed USB device number 61 using xhci_hcd
[1014776.177462] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1014776.178064] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1014776.179377] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014776.880618] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1014776.932967] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014777.717930] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1014777.763843] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014777.834011] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014782.730104] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1014787.627660] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1014787.664928] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1014787.666496] wlp2s0: authenticated
[1014787.679117] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1014787.681775] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[1014787.684017] wlp2s0: associated
[1014787.684041] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[1014787.714418] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1020162.706899] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[1020162.757971] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[1020162.762739] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 2/3)
[1020162.767396] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 3/3)
[1020162.772136] wlp2s0: authentication with 24:de:c6:52:b9:c0 timed out
[1020163.456595] wlp2s0: authenticate with 24:de:c6:52:ca:50
[1020163.506951] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[1020163.511730] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 2/3)
[1020163.516457] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 3/3)
[1020163.521182] wlp2s0: authentication with 24:de:c6:52:ca:50 timed out
[1020164.219762] wlp2s0: authenticate with 24:de:c6:52:c7:40
[1020164.297821] wlp2s0: send auth to 24:de:c6:52:c7:40 (try 1/3)
[1020164.302838] wlp2s0: send auth to 24:de:c6:52:c7:40 (try 2/3)
[1020164.307737] wlp2s0: send auth to 24:de:c6:52:c7:40 (try 3/3)
[1020164.312546] wlp2s0: authentication with 24:de:c6:52:c7:40 timed out
[1020165.013028] wlp2s0: authenticate with 24:de:c6:52:bc:f0
[1020165.092663] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 1/3)
[1020165.097734] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 2/3)
[1020165.102422] wlp2s0: send auth to 24:de:c6:52:bc:f0 (try 3/3)
[1020165.107231] wlp2s0: authentication with 24:de:c6:52:bc:f0 timed out
[1020165.747340] wlp2s0: authenticate with 24:de:c6:52:c7:48
[1020165.781243] wlp2s0: send auth to 24:de:c6:52:c7:48 (try 1/3)
[1020165.782579] wlp2s0: send auth to 24:de:c6:52:c7:48 (try 2/3)
[1020165.783836] wlp2s0: send auth to 24:de:c6:52:c7:48 (try 3/3)
[1020165.785193] wlp2s0: authentication with 24:de:c6:52:c7:48 timed out
[1020166.274964] wlp2s0: authenticate with 24:de:c6:52:c9:48
[1020166.308090] wlp2s0: send auth to 24:de:c6:52:c9:48 (try 1/3)
[1020166.309428] wlp2s0: send auth to 24:de:c6:52:c9:48 (try 2/3)
[1020166.310710] wlp2s0: send auth to 24:de:c6:52:c9:48 (try 3/3)
[1020166.312039] wlp2s0: authentication with 24:de:c6:52:c9:48 timed out
[1020166.655922] wlp2s0: authenticate with 24:de:c6:52:b6:88
[1020166.697000] wlp2s0: send auth to 24:de:c6:52:b6:88 (try 1/3)
[1020166.698344] wlp2s0: send auth to 24:de:c6:52:b6:88 (try 2/3)
[1020166.699585] wlp2s0: send auth to 24:de:c6:52:b6:88 (try 3/3)
[1020166.700824] wlp2s0: authentication with 24:de:c6:52:b6:88 timed out
[1020166.879427] wlp2s0: authenticate with 24:de:c6:52:bf:70
[1020166.930482] wlp2s0: send auth to 24:de:c6:52:bf:70 (try 1/3)
[1020166.935474] wlp2s0: send auth to 24:de:c6:52:bf:70 (try 2/3)
[1020166.943549] wlp2s0: send auth to 24:de:c6:52:bf:70 (try 3/3)
[1020166.948410] wlp2s0: authentication with 24:de:c6:52:bf:70 timed out
[1020171.912050] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1020171.950017] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1020171.951335] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 2/3)
[1020171.952652] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 3/3)
[1020171.953962] wlp2s0: authentication with 24:de:c6:52:b9:c8 timed out
[1020177.380877] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020177.388911] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020380.437263] PM: Hibernation mode set to 'platform'
[1020381.402043] PM: Syncing filesystems ...
[1020381.852532] PM: done.
[1020381.852536] Freezing user space processes ... (elapsed 0.001 seconds) done.
[1020381.854372] OOM killer disabled.
[1020381.854664] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[1020381.854666] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[1020381.854667] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[1020381.854671] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[1020381.854672] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[1020381.854809] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[1020381.856468] PM: Basic memory bitmaps created
[1020381.856800] PM: Preallocating image memory... done (allocated 1539123 pages)
[1020386.270868] PM: Allocated 6156492 kbytes in 4.41 seconds (1396.02 MB/s)
[1020386.270868] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[1020386.271890] Suspending console(s) (use no_console_suspend to debug)
[1020386.685312] PM: freeze of devices complete after 413.419 msecs
[1020386.685633] PM: late freeze of devices complete after 0.319 msecs
[1020386.701661] PM: noirq freeze of devices complete after 16.026 msecs
[1020386.702084] ACPI: Preparing to enter system sleep state S4
[1020386.781684] ACPI: EC: event blocked
[1020386.781685] ACPI: EC: EC stopped
[1020386.781686] PM: Saving platform NVS memory
[1020386.784958] Disabling non-boot CPUs ...
[1020386.812972] smpboot: CPU 1 is now offline
[1020386.832970] smpboot: CPU 2 is now offline
[1020386.862942] smpboot: CPU 3 is now offline
[1020386.893475] smpboot: CPU 4 is now offline
[1020386.922960] smpboot: CPU 5 is now offline
[1020386.952910] smpboot: CPU 6 is now offline
[1020386.982891] smpboot: CPU 7 is now offline
[1020386.984372] PM: Creating hibernation image:
[1020387.121668] PM: Need to copy 1539745 pages
[1020387.121670] PM: Normal pages needed: 1539745 + 1024, available pages: 2643901
[1020386.985082] PM: Restoring platform NVS memory
[1020386.985561] ACPI: EC: EC started
[1020386.986268] Suspended for 3540.200 seconds
[1020386.986297] Enabling non-boot CPUs ...
[1020386.986331] x86: Booting SMP configuration:
[1020386.986331] smpboot: Booting Node 0 Processor 1 APIC 0x2
[1020386.986852] cache: parent cpu1 should not be sleeping
[1020386.986959] CPU1 is up
[1020386.986972] smpboot: Booting Node 0 Processor 2 APIC 0x4
[1020386.987494] cache: parent cpu2 should not be sleeping
[1020386.987608] CPU2 is up
[1020386.987619] smpboot: Booting Node 0 Processor 3 APIC 0x6
[1020386.988148] cache: parent cpu3 should not be sleeping
[1020386.988267] CPU3 is up
[1020386.988279] smpboot: Booting Node 0 Processor 4 APIC 0x1
[1020386.988879] cache: parent cpu4 should not be sleeping
[1020386.989006] CPU4 is up
[1020386.989023] smpboot: Booting Node 0 Processor 5 APIC 0x3
[1020386.989539] cache: parent cpu5 should not be sleeping
[1020386.989671] CPU5 is up
[1020386.989684] smpboot: Booting Node 0 Processor 6 APIC 0x5
[1020386.990208] cache: parent cpu6 should not be sleeping
[1020386.990349] CPU6 is up
[1020386.990361] smpboot: Booting Node 0 Processor 7 APIC 0x7
[1020386.990890] cache: parent cpu7 should not be sleeping
[1020386.991038] CPU7 is up
[1020386.997666] ACPI: Waking up from system sleep state S4
[1020387.054725] PM: noirq restore of devices complete after 15.047 msecs
[1020387.055100] PM: early restore of devices complete after 0.342 msecs
[1020387.189359] usb usb1: root hub lost power or was reset
[1020387.189360] usb usb2: root hub lost power or was reset
[1020387.189398] ACPI: EC: event unblocked
[1020387.199281] sd 3:0:0:0: [sda] Starting disk
[1020387.528029] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[1020387.532260] ata2: SATA link down (SStatus 4 SControl 300)
[1020387.532281] ata3: SATA link down (SStatus 4 SControl 300)
[1020387.532315] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[1020387.534822] ata4.00: configured for UDMA/133
[1020387.771426] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[1020387.859580] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[1020387.888732] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[1020388.014842] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[1020388.258097] usb 1-7: reset full-speed USB device number 61 using xhci_hcd
[1020388.389476] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[1020388.389480] PM: Device 1-7 failed to restore async: error -32
[1020388.478189] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[1020388.592709] PM: restore of devices complete after 1403.395 msecs
[1020388.593148] usb 1-10:1.0: rebind failed: -517
[1020388.593151] usb 1-10:1.1: rebind failed: -517
[1020388.593636] acpi LNXPOWER:16: Turning OFF
[1020388.593752] acpi LNXPOWER:15: Turning OFF
[1020388.593865] acpi LNXPOWER:14: Turning OFF
[1020388.593978] acpi LNXPOWER:13: Turning OFF
[1020388.594089] acpi LNXPOWER:12: Turning OFF
[1020388.594198] acpi LNXPOWER:11: Turning OFF
[1020388.594307] acpi LNXPOWER:10: Turning OFF
[1020388.594419] acpi LNXPOWER:0f: Turning OFF
[1020388.594531] acpi LNXPOWER:0e: Turning OFF
[1020388.594642] acpi LNXPOWER:0d: Turning OFF
[1020388.594780] acpi LNXPOWER:0c: Turning OFF
[1020388.594893] acpi LNXPOWER:0b: Turning OFF
[1020388.595004] acpi LNXPOWER:0a: Turning OFF
[1020388.595115] acpi LNXPOWER:09: Turning OFF
[1020388.595226] acpi LNXPOWER:08: Turning OFF
[1020388.595348] acpi LNXPOWER:07: Turning OFF
[1020388.595451] acpi LNXPOWER:06: Turning OFF
[1020388.595554] acpi LNXPOWER:05: Turning OFF
[1020388.595656] acpi LNXPOWER:04: Turning OFF
[1020388.595759] acpi LNXPOWER:03: Turning OFF
[1020388.595836] PM: Image restored successfully.
[1020388.595898] PM: Basic memory bitmaps freed
[1020388.595903] OOM killer enabled.
[1020388.595904] Restarting tasks ...
[1020388.595995] usb 1-7: USB disconnect, device number 61
[1020388.601866] done.
[1020388.651491] video LNXVIDEO:01: Restoring backlight state
[1020388.764681] usb 1-7: new full-speed USB device number 62 using xhci_hcd
[1020391.892566] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1020391.892933] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1020391.961261] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020392.666116] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1020392.718831] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020393.496334] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1020393.547417] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020394.425228] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020399.611899] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1020404.498453] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1020404.535271] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1020404.536813] wlp2s0: authenticated
[1020404.548010] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1020404.550712] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[1020404.553062] wlp2s0: associated
[1020404.553103] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[1020404.568833] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1050704.406567] wlp2s0: Connection to AP 24:de:c6:52:b9:c8 lost
[1050709.526653] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[1050710.505177] wlp2s0: authenticate with 24:de:c6:52:ca:50
[1050710.555537] wlp2s0: send auth to 24:de:c6:52:ca:50 (try 1/3)
[1050710.559867] wlp2s0: authenticated
[1050710.563208] wlp2s0: associate with 24:de:c6:52:ca:50 (try 1/3)
[1050710.566944] wlp2s0: RX AssocResp from 24:de:c6:52:ca:50 (capab=0x1431 status=0 aid=1)
[1050710.569248] wlp2s0: associated
[1050710.653972] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:ca:50
[1050732.151574] wlp2s0: disconnect from AP 24:de:c6:52:ca:50 for new auth to 24:de:c6:52:b9:c8
[1050732.162942] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1050732.200933] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1050732.205719] wlp2s0: authenticated
[1050732.206514] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1050732.209610] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[1050732.212232] wlp2s0: associated
[1050732.244535] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1080972.326328] wlp2s0: disconnect from AP 24:de:c6:52:b9:c8 for new auth to 24:de:c6:52:b9:c0
[1080972.338839] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[1080972.389557] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[1080972.392280] wlp2s0: authenticated
[1080972.398364] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[1080972.454267] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[1080972.456964] wlp2s0: associated
[1080972.484707] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[1081005.632168] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[1081006.013366] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[1081006.063439] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[1081006.066556] wlp2s0: authenticated
[1081006.068402] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[1081006.073278] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[1081006.075590] wlp2s0: associated
[1081006.175233] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[1081039.763830] wlp2s0: deauthenticated from 24:de:c6:52:b9:c0 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[1081039.795724] wlp2s0: authenticate with 24:de:c6:52:b9:c0
[1081039.846363] wlp2s0: send auth to 24:de:c6:52:b9:c0 (try 1/3)
[1081039.848292] wlp2s0: authenticated
[1081039.851805] wlp2s0: associate with 24:de:c6:52:b9:c0 (try 1/3)
[1081039.855782] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c0 (capab=0x1431 status=0 aid=1)
[1081039.858403] wlp2s0: associated
[1081039.865817] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 24:de:c6:52:b9:c0
[1081092.083851] wlp2s0: disconnect from AP 24:de:c6:52:b9:c0 for new auth to 24:de:c6:52:b9:c8
[1081092.094243] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1081092.132967] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1081092.134459] wlp2s0: authenticated
[1081092.138335] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1081092.194007] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=2)
[1081092.196235] wlp2s0: associated
[1081092.296101] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8
[1091559.669650] wlp2s0: deauthenticating from 24:de:c6:52:b9:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[1091559.692912] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091560.110545] PM: Hibernation mode set to 'platform'
[1091561.121235] PM: Syncing filesystems ...
[1091561.962835] PM: done.
[1091561.962837] Freezing user space processes ... (elapsed 0.001 seconds) done.
[1091561.964502] OOM killer disabled.
[1091561.964724] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[1091561.964725] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
[1091561.964726] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[1091561.964729] PM: Marking nosave pages: [mem 0x78153000-0x78154fff]
[1091561.964731] PM: Marking nosave pages: [mem 0x7e7f8000-0x7fbfdfff]
[1091561.964842] PM: Marking nosave pages: [mem 0x7fbff000-0xffffffff]
[1091561.966176] PM: Basic memory bitmaps created
[1091561.966466] PM: Preallocating image memory... done (allocated 1646755 pages)
[1091566.083816] PM: Allocated 6587020 kbytes in 4.11 seconds (1602.68 MB/s)
[1091566.083817] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[1091566.085187] Suspending console(s) (use no_console_suspend to debug)
[1091566.438530] PM: freeze of devices complete after 353.341 msecs
[1091566.438992] PM: late freeze of devices complete after 0.460 msecs
[1091566.453394] PM: noirq freeze of devices complete after 14.399 msecs
[1091566.453648] ACPI: Preparing to enter system sleep state S4
[1091566.533441] ACPI: EC: event blocked
[1091566.533441] ACPI: EC: EC stopped
[1091566.533442] PM: Saving platform NVS memory
[1091566.536755] Disabling non-boot CPUs ...
[1091566.564755] smpboot: CPU 1 is now offline
[1091566.584736] smpboot: CPU 2 is now offline
[1091566.624697] smpboot: CPU 3 is now offline
[1091566.661909] smpboot: CPU 4 is now offline
[1091566.691311] smpboot: CPU 5 is now offline
[1091566.721363] smpboot: CPU 6 is now offline
[1091566.748010] smpboot: CPU 7 is now offline
[1091566.749579] PM: Creating hibernation image:
[1091566.883078] PM: Need to copy 1648192 pages
[1091566.883080] PM: Normal pages needed: 1648192 + 1024, available pages: 2535453
[1091566.750285] PM: Restoring platform NVS memory
[1091566.750765] ACPI: EC: EC started
[1091566.751472] Suspended for 13811.233 seconds
[1091566.751504] Enabling non-boot CPUs ...
[1091566.751540] x86: Booting SMP configuration:
[1091566.751540] smpboot: Booting Node 0 Processor 1 APIC 0x2
[1091566.752062] cache: parent cpu1 should not be sleeping
[1091566.752169] CPU1 is up
[1091566.752182] smpboot: Booting Node 0 Processor 2 APIC 0x4
[1091566.752701] cache: parent cpu2 should not be sleeping
[1091566.752816] CPU2 is up
[1091566.752829] smpboot: Booting Node 0 Processor 3 APIC 0x6
[1091566.753349] cache: parent cpu3 should not be sleeping
[1091566.753468] CPU3 is up
[1091566.753481] smpboot: Booting Node 0 Processor 4 APIC 0x1
[1091566.754081] cache: parent cpu4 should not be sleeping
[1091566.754212] CPU4 is up
[1091566.754229] smpboot: Booting Node 0 Processor 5 APIC 0x3
[1091566.754745] cache: parent cpu5 should not be sleeping
[1091566.754876] CPU5 is up
[1091566.754889] smpboot: Booting Node 0 Processor 6 APIC 0x5
[1091566.755417] cache: parent cpu6 should not be sleeping
[1091566.755562] CPU6 is up
[1091566.755573] smpboot: Booting Node 0 Processor 7 APIC 0x7
[1091566.756119] cache: parent cpu7 should not be sleeping
[1091566.756275] CPU7 is up
[1091566.762906] ACPI: Waking up from system sleep state S4
[1091566.816481] PM: noirq restore of devices complete after 14.971 msecs
[1091566.816787] PM: early restore of devices complete after 0.272 msecs
[1091566.965595] usb usb1: root hub lost power or was reset
[1091566.965596] usb usb2: root hub lost power or was reset
[1091566.965632] ACPI: EC: event unblocked
[1091566.974448] sd 3:0:0:0: [sda] Starting disk
[1091567.303193] usb 1-2: reset high-speed USB device number 45 using xhci_hcd
[1091567.310797] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[1091567.310908] ata3: SATA link down (SStatus 4 SControl 300)
[1091567.310928] ata2: SATA link down (SStatus 4 SControl 300)
[1091567.313319] ata4.00: configured for UDMA/133
[1091567.546588] usb 1-10: reset full-speed USB device number 7 using xhci_hcd
[1091567.634199] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[1091567.663476] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[1091567.793268] usb 1-7: reset full-speed USB device number 62 using xhci_hcd
[1091567.925043] dpm_run_callback(): usb_dev_restore+0x0/0x20 [usbcore] returns -32
[1091567.925061] PM: Device 1-7 failed to restore async: error -32
[1091568.036650] usb 1-9: reset full-speed USB device number 48 using xhci_hcd
[1091568.256633] usb 1-2.1: reset full-speed USB device number 47 using xhci_hcd
[1091568.371232] PM: restore of devices complete after 1405.704 msecs
[1091568.371677] usb 1-10:1.0: rebind failed: -517
[1091568.371680] usb 1-10:1.1: rebind failed: -517
[1091568.372234] acpi LNXPOWER:16: Turning OFF
[1091568.372369] acpi LNXPOWER:15: Turning OFF
[1091568.372499] acpi LNXPOWER:14: Turning OFF
[1091568.372630] acpi LNXPOWER:13: Turning OFF
[1091568.372759] acpi LNXPOWER:12: Turning OFF
[1091568.372887] acpi LNXPOWER:11: Turning OFF
[1091568.373015] acpi LNXPOWER:10: Turning OFF
[1091568.373176] acpi LNXPOWER:0f: Turning OFF
[1091568.373307] acpi LNXPOWER:0e: Turning OFF
[1091568.373435] acpi LNXPOWER:0d: Turning OFF
[1091568.373565] acpi LNXPOWER:0c: Turning OFF
[1091568.373695] acpi LNXPOWER:0b: Turning OFF
[1091568.373824] acpi LNXPOWER:0a: Turning OFF
[1091568.373952] acpi LNXPOWER:09: Turning OFF
[1091568.374081] acpi LNXPOWER:08: Turning OFF
[1091568.374209] acpi LNXPOWER:07: Turning OFF
[1091568.374336] acpi LNXPOWER:06: Turning OFF
[1091568.374464] acpi LNXPOWER:05: Turning OFF
[1091568.374590] acpi LNXPOWER:04: Turning OFF
[1091568.374718] acpi LNXPOWER:03: Turning OFF
[1091568.374813] PM: Image restored successfully.
[1091568.374895] PM: Basic memory bitmaps freed
[1091568.374902] OOM killer enabled.
[1091568.374903] Restarting tasks ...
[1091568.375017] usb 1-7: USB disconnect, device number 62
[1091568.376072] done.
[1091568.426605] video LNXVIDEO:01: Restoring backlight state
[1091568.543108] usb 1-7: new full-speed USB device number 63 using xhci_hcd
[1091574.266430] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1091574.266918] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[1091574.612382] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091575.310580] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1091575.363721] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091576.137170] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[1091576.186394] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091579.654839] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091584.654762] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[1091589.692968] wlp2s0: authenticate with 24:de:c6:52:b9:c8
[1091589.729871] wlp2s0: send auth to 24:de:c6:52:b9:c8 (try 1/3)
[1091589.732500] wlp2s0: authenticated
[1091589.739761] wlp2s0: associate with 24:de:c6:52:b9:c8 (try 1/3)
[1091589.742453] wlp2s0: RX AssocResp from 24:de:c6:52:b9:c8 (capab=0x1411 status=0 aid=3)
[1091589.744865] wlp2s0: associated
[1091589.744905] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[1091589.796515] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:de:c6:52:b9:c8Last edited by pspencil (2017-10-24 23:02:23)
Offline
#2 2017-10-24 20:55:20
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,869
Re: [SOLVED]PM: Device 1-7 failed to restore async: error -32 during hiber
The particular usb device (1-7, check lsusb - notice that usb is *not* the jack/plug - this can be an internal device wired on the usb) doesn't like the powerdown and cannot restore its previous state. It's therefore reset (like if you un-/replugged it) immediately afterwards.
This means nothing by itself.
Online
#3 2017-10-24 23:01:38
- pspencil
- Member
- Registered: 2017-10-05
- Posts: 19
Re: [SOLVED]PM: Device 1-7 failed to restore async: error -32 during hiber
Hi seth, that seems like the network card. I think it wouldn't matter much right? Resetting the network card..
Offline
#4 2017-10-25 06:51:33
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,869
Re: [SOLVED]PM: Device 1-7 failed to restore async: error -32 during hiber
lsusb will tell you for sure which device this is and, if the reset works flawless, this isn't a problem for the vast majority of devices.
Eg. i'd expect a DVB stick to not continue the same channel you left it when hibernating (because the tuner will re-init) - but actually most DVB sticks I've had (dvbsky) don't like their kernel modules being loaded across S3 or S4 at all (and result in polluting the USB stack to the degree of complete USB failure)
Online