You are not logged in.
Pages: 1
On October 5 I did a pacman -Syu to get everything up to date and haven't done so previously for probably 6 months because I was in the middle of a large project and couldn't take the risk of breaking something and having to spend a bunch of time fixing it...
When it updated I remember it saying something about a mesa package being replaced by something else and I knew right there I was in for trouble. Since then I can't get anything that uses Open GL to work
They just say:
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 154 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Value in failed request: 0x0
Serial number of failed request: 23
Current serial number in output stream: 24
I've tried everything I can think of. I was using the radeon driver. Switched to AMDGPU which seems to work the same as the radeon driver. I have a 4 head display with AMD Firepro W4100 graphics card. I've been running arch for probably the last 6 years or more and this is the first time I've came across a issue that I can't seem to solve. Hope someone here can shed some light on this, I have a hot PCB project I need to get done by the end of the week and KiCad won't work because PCBNew uses OpenGL
Offline
paste dmesg and your xorg log.
This is not a wayland session, is it?
Offline
Dmesg:
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.11-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Nov 2 10:25:56 CET 2017
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=LABEL=COPPER rw amdgpu.si_support=1 radeon.si_support=0 initrd=../initramfs-linux.img
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000927ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000092800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: No reference (HPET/PMTIMER) available
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9f0cc00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9f0cc008c000] 8c000 size 24576
[ 0.000000] BRK [0x619d64000, 0x619d64fff] PGTABLE
[ 0.000000] BRK [0x619d65000, 0x619d65fff] PGTABLE
[ 0.000000] BRK [0x619d66000, 0x619d66fff] PGTABLE
[ 0.000000] BRK [0x619d67000, 0x619d67fff] PGTABLE
[ 0.000000] BRK [0x619d68000, 0x619d68fff] PGTABLE
[ 0.000000] BRK [0x619d69000, 0x619d69fff] PGTABLE
[ 0.000000] BRK [0x619d6a000, 0x619d6afff] PGTABLE
[ 0.000000] BRK [0x619d6b000, 0x619d6bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f1e4000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB940 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000BF780000 000044 (v01 080912 RSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BF780200 000084 (v01 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000BF7804B0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000BF798000 000040
[ 0.000000] ACPI: APIC 0x00000000BF780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BF780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BF798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: ASPT 0x00000000BF798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000BF79A5E0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x63ffe7000-0x63ffebfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000091fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000063fffffff]
[ 0.000000] On node 0 totalpages: 6289169
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3985 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 86016 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x00092fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00093000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9f12e7200000 s106520 r8192 d32744 u262144
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 6190878
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=LABEL=COPPER rw amdgpu.si_support=1 radeon.si_support=0 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24666748K/25156676K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 489928K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 28354 entries in 111 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 8448, nr_irqs: 960, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.013333] tsc: Unable to calibrate against PIT
[ 0.013333] tsc: using HPET reference calibration
[ 0.013333] tsc: Detected 3073.486 MHz processor
[ 0.013333] Calibrating delay loop (skipped), value calculated using timer frequency.. 6149.09 BogoMIPS (lpj=10244953)
[ 0.013333] pid_max: default: 32768 minimum: 301
[ 0.013333] ACPI: Core revision 20170531
[ 0.023606] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.023649] Security Framework initialized
[ 0.023651] Yama: becoming mindful.
[ 0.030653] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)[ 0.035445] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035548] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035637] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035852] CPU: Physical Processor ID: 0
[ 0.035852] CPU: Processor Core ID: 0
[ 0.035859] mce: CPU supports 9 MCE banks
[ 0.035867] CPU0: Thermal monitoring enabled (TM1)
[ 0.035880] process: using mwait in idle threads
[ 0.035882] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.035883] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.035986] Freeing SMP alternatives memory: 24K
[ 0.036765] smpboot: Max logical packages: 4
[ 0.036771] DMAR-IR: This system BIOS has enabled interrupt remapping
[ 0.036773] Switched APIC routing to physical flat.
[ 0.037335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083333] APIC calibration not consistent with PM-Timer: 123ms instead of 100ms
[ 0.083333] APIC delta adjusted to PM-Timer: 835224 (1030109)
[ 0.083333] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[ 0.093344] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[ 0.093362] core: CPU erratum AAJ80 worked around
[ 0.093363] core: CPUID marked event: 'bus cycles' unavailable
[ 0.093365] ... version: 3
[ 0.093365] ... bit width: 48
[ 0.093366] ... generic registers: 4
[ 0.093367] ... value mask: 0000ffffffffffff
[ 0.093367] ... max period: 000000007fffffff
[ 0.093368] ... fixed-purpose events: 3
[ 0.093368] ... event mask: 000000070000000f
[ 0.100002] Hierarchical SRCU implementation.
[ 0.113673] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120013] smp: Bringing up secondary CPUs ...
[ 0.146683] x86: Booting SMP configuration:
[ 0.146685] .... node #0, CPUs: #1 #2
[ 0.003333] calibrate_delay_direct() dropping min bogoMips estimate 4 = 8508428
[ 0.366701] #3
[ 0.003333] calibrate_delay_direct() dropping max bogoMips estimate 1 = 12204688[ 0.480018] #4 #5
[ 0.003333] calibrate_delay_direct() dropping min bogoMips estimate 3 = 8193254
[ 0.700031] #6 #7
[ 0.895362] smp: Brought up 1 node, 8 CPUs
[ 0.895362] smpboot: Total of 8 processors activated (49023.95 BogoMIPS)
[ 0.897483] devtmpfs: initialized
[ 0.897483] x86/mm: Memory block size: 128MB
[ 0.901222] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.901222] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.901222] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.901222] pinctrl core: initialized pinctrl subsystem
[ 0.901222] RTC time: 13:48:37, date: 11/04/17
[ 0.901222] NET: Registered protocol family 16
[ 0.901222] cpuidle: using governor ladder
[ 0.901222] cpuidle: using governor menu
[ 0.901222] PCCT header not found.
[ 0.901222] ACPI: bus type PCI registered
[ 0.901222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.901222] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.901222] PCI: not using MMCONFIG
[ 0.901222] PCI: Using configuration type 1 for base access
[ 0.901222] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.901222] ACPI: Added _OSI(Module Device)
[ 0.901222] ACPI: Added _OSI(Processor Device)
[ 0.901222] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.901222] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.901222] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.933369] ACPI: Dynamic OEM Table Load:
[ 0.933380] ACPI: SSDT 0xFFFF9F12E3268000 00223C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.933946] ACPI: Interpreter enabled
[ 0.933965] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.933967] ACPI: Using IOAPIC for interrupt routing
[ 0.933996] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.934835] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.934839] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.935251] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.941719] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.941723] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.941727] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.941953] PCI host bridge to bus 0000:00
[ 0.941956] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.941957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.941958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.941959] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.941960] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.941960] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.941962] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.941972] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.942033] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.942111] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.942169] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.942245] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.942300] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.942373] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.942430] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.942507] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.942561] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.942640] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.942743] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.942844] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.942944] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.943036] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.943077] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.943174] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.943214] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.943307] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.943349] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.943450] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.943470] pci 0000:00:1a.7: reg 0x10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 0.943545] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.943613] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.943632] pci 0000:00:1b.0: reg 0x10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 0.943696] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.943765] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.943833] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.943909] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.943977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.944052] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.944092] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.944186] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.944226] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.944319] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.944359] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.944461] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.944480] pci 0000:00:1d.7: reg 0x10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 0.944555] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.944620] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.944731] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.944806] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.944810] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.944812] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.944900] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[ 0.944916] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.944922] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.944928] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.944934] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.944940] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.944947] pci 0000:00:1f.2: reg 0x24: [mem 0xfb9fc000-0xfb9fc7ff]
[ 0.944983] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.945046] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.945062] pci 0000:00:1f.3: reg 0x10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 0.945080] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.945189] pci 0000:01:00.0: [1b4b:91a3] type 00 class 0x01018f
[ 0.945203] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.945209] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.945215] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.945221] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.945227] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.945233] pci 0000:01:00.0: reg 0x24: [mem 0xfbaff000-0xfbaff7ff]
[ 0.945240] pci 0000:01:00.0: reg 0x30: [mem 0xfbae0000-0xfbaeffff pref]
[ 0.945273] pci 0000:01:00.0: PME# supported from D3hot
[ 0.956697] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.956703] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.956706] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.956793] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.956816] pci 0000:02:00.0: reg 0x10: [mem 0xfbbfe000-0xfbbfffff 64bit]
[ 0.956905] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.966686] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.966691] pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.966753] pci 0000:03:00.0: [1002:682c] type 00 class 0x030000
[ 0.966777] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.966785] pci 0000:03:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit]
[ 0.966791] pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc0ff]
[ 0.966801] pci 0000:03:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcdffff pref]
[ 0.966841] pci 0000:03:00.0: supports D1 D2
[ 0.966842] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.966890] pci 0000:03:00.1: [1002:aab0] type 00 class 0x040300
[ 0.966906] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
[ 0.966964] pci 0000:03:00.1: supports D1 D2
[ 0.976700] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.976706] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.976709] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.976715] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.976788] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.976827] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.976834] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.976906] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.976945] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.976957] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.976970] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.976982] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.976994] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.977006] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.977019] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.977081] pci 0000:05:00.0: PME# supported from D3hot
[ 0.990035] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.990039] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.990042] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.990106] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.990126] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.990134] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.990170] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.990209] pci 0000:07:01.0: supports D1 D2
[ 0.990210] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.990251] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.990269] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.990278] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.990341] pci 0000:07:02.0: supports D2
[ 0.990342] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.990401] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.990403] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.990406] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.990411] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.990412] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.990413] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.990414] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.990415] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.990416] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.990416] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.990416] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.990416] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.990484] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.990484] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.990484] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.990484] vgaarb: loaded
[ 0.990484] EDAC MC: Ver: 3.0.0
[ 0.990484] PCI: Using ACPI for IRQ routing
[ 0.996269] PCI: Discovered peer bus ff
[ 0.996270] PCI: root bus ff: using default resources
[ 0.996271] PCI: Probing PCI hardware (bus ff)
[ 0.996290] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.996290] PCI host bridge to bus 0000:ff
[ 0.996292] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.996293] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.996294] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.996296] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.996300] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.996334] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.996365] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.996395] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.996425] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.996456] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.996486] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.996516] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.996546] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.996575] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.996606] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.996635] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.996663] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.996696] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.996724] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.996754] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.996783] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.996814] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.996842] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.996880] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.996881] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.996886] PCI: pci_cache_line_size set to 64 bytes
[ 0.996960] e820: reserve RAM buffer [mem 0x00092800-0x0009ffff]
[ 0.996961] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.997031] NetLabel: Initializing
[ 0.997032] NetLabel: domain hash size = 128
[ 0.997032] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.997045] NetLabel: unlabeled traffic allowed by default
[ 0.997062] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.997062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.997062] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.000025] clocksource: Switched to clocksource hpet
[ 1.010884] VFS: Disk quotas dquot_6.6.0
[ 1.010907] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.010976] pnp: PnP ACPI init
[ 1.011058] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.011059] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.011060] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.011061] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.011063] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.011064] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.011067] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.011126] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.011209] system 00:02: [io 0x0290-0x029f] has been reserved
[ 1.011211] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011377] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 1.011378] system 00:03: [io 0x0800-0x087f] has been reserved
[ 1.011379] system 00:03: [io 0x0500-0x057f] could not be reserved
[ 1.011381] system 00:03: [io 0x0600-0x0607] has been reserved
[ 1.011382] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.011384] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.011385] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.011387] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011478] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.011480] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011568] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.011569] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.011571] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011722] pnp 00:06: [dma 0 disabled]
[ 1.011769] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.011846] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.011849] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.011988] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.011989] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.011990] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.011992] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.011993] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.011995] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.012091] pnp: PnP ACPI: found 9 devices
[ 1.018044] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.018074] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 1.018076] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 add_align 100000
[ 1.018083] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 1.018097] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 1.018101] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.018102] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.018104] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.018106] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 1.018109] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.018114] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.018117] pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.018122] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 1.018124] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 1.018127] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.018129] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.018133] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 1.018140] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 1.018141] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.018145] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.018147] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.018152] pci 0000:05:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd0ffff pref]
[ 1.018153] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 1.018155] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.018158] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.018161] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.018165] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 1.018167] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.018170] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.018176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.018177] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.018178] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.018179] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.018180] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 1.018181] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.018182] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.018183] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.018184] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.018186] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.018187] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.018188] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.018189] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 1.018190] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.018191] pci_bus 0000:06: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.018192] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 1.018193] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.018194] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.018195] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 1.018196] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.018197] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 1.018198] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 1.018199] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.018200] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[ 1.018201] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 1.018202] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 1.018246] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 1.018247] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 1.018276] NET: Registered protocol family 2
[ 1.018466] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)[ 1.018858] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.019005] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.019060] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.019143] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 1.019253] NET: Registered protocol family 1
[ 1.020829] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.020836] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 1.020888] Unpacking initramfs...
[ 1.240733] Freeing initrd memory: 14448K
[ 1.240745] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.240747] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff9f0d7b780000-ffff9f0d7f77ffff]
[ 1.240972] Scanning for low memory corruption every 60 seconds
[ 1.241493] Initialise system trusted keyrings
[ 1.241500] Key type blacklist registered
[ 1.241548] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 1.242384] zbud: loaded
[ 1.243481] Key type asymmetric registered
[ 1.243506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)[ 1.243536] io scheduler noop registered
[ 1.243537] io scheduler deadline registered
[ 1.243557] io scheduler cfq registered (default)
[ 1.243558] io scheduler mq-deadline registered
[ 1.243559] io scheduler kyber registered
[ 1.243576] io scheduler bfq registered
[ 1.243811] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.244199] intel_idle: MWAIT substates: 0x1120
[ 1.244200] intel_idle: v0.4.1 model 0x1A
[ 1.244416] intel_idle: lapic_timer_reliable_states 0x2
[ 1.244562] GHES: HEST is not enabled!
[ 1.244625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.267202] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.270664] rtc_cmos 00:01: RTC can wake from S4
[ 1.270791] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.270816] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.271173] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.271213] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 1.271430] NET: Registered protocol family 10
[ 1.276147] Segment Routing with IPv6
[ 1.276174] NET: Registered protocol family 17
[ 1.277297] RAS: Correctable Errors collector initialized.
[ 1.277331] microcode: sig=0x106a5, pf=0x2, revision=0x15
[ 1.277830] microcode: Microcode Update Driver: v2.2.
[ 1.277842] sched_clock: Marking stable (1277821859, 0)->(1449981758, -172159899)
[ 1.280214] registered taskstats version 1
[ 1.280221] Loading compiled-in X.509 certificates
[ 1.280239] zswap: loaded using pool lzo/zbud
[ 1.282460] Key type big_key registered
[ 1.282764] Magic number: 9:496:836
[ 1.282882] rtc_cmos 00:01: setting system clock to 2017-11-04 13:48:38 UTC (1509803318)
[ 1.283398] PM: Hibernation image not present or could not be loaded.
[ 1.284822] Freeing unused kernel memory: 1336K
[ 1.284823] Write protecting the kernel read-only data: 10240k
[ 1.288389] Freeing unused kernel memory: 1536K
[ 1.295961] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 1.296102] systemd[1]: Detected architecture x86-64.
[ 1.296104] systemd[1]: Running in initial RAM disk.
[ 1.296108] systemd[1]: Running with unpopulated /etc.
[ 1.296300] systemd[1]: No hostname configured.
[ 1.296303] systemd[1]: Set hostname to <archlinux>.
[ 1.296329] systemd[1]: Initializing machine ID from random generator.
[ 1.300555] systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Cannot assign requested address
[ 1.305861] systemd[1]: Reached target Paths.
[ 1.306488] systemd[1]: Created slice system.slice.
[ 1.313142] Linux agpgart interface v0.103
[ 1.324787] [drm] amdgpu kernel modesetting enabled.
[ 1.325882] [drm] initializing kernel modesetting (VERDE 0x1002:0x682C 0x1002:0x2B1E 0x00).
[ 1.325892] [drm] register mmio base: 0xFBC80000
[ 1.325892] [drm] register mmio size: 262144
[ 1.352412] [drm] BIOS signature incorrect 50 7
[ 1.352450] ATOM BIOS: 113-C7550100-103
[ 1.352458] [drm] GPU post is not needed
[ 1.352459] [drm] Changing default dispclk from 600Mhz to 625Mhz
[ 1.352619] [drm] vm size is 64 GB, block size is 13-bit
[ 1.352666] amdgpu 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.352668] amdgpu 0000:03:00.0: GTT: 3072M 0x0000000080000000 - 0x000000013FFFFFFF
[ 1.352674] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.352675] [drm] RAM width 128bits GDDR5
[ 1.352737] [TTM] Zone kernel: Available graphics memory: 12342046 kiB
[ 1.352738] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.352739] [TTM] Initializing pool allocator
[ 1.352742] [TTM] Initializing DMA pool allocator
[ 1.352763] [drm] amdgpu: 2048M of VRAM memory ready
[ 1.352764] [drm] amdgpu: 3072M of GTT memory ready.
[ 1.352772] [drm] GART: num cpu pages 786432, num gpu pages 786432
[ 1.359715] amdgpu 0000:03:00.0: PCIE GART of 3072M enabled (table at 0x0000000000040000).
[ 1.359769] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.359769] [drm] Driver supports precise vblank timestamp query.
[ 1.359805] amdgpu 0000:03:00.0: amdgpu: using MSI.
[ 1.359821] [drm] amdgpu: irq initialized.
[ 1.359865] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
[ 1.359886] [drm] Internal thermal controller with fan control
[ 1.359895] [drm] amdgpu: dpm initialized
[ 1.360218] [drm] AMDGPU Display Connectors
[ 1.360219] [drm] Connector 0:
[ 1.360219] [drm] DP-1
[ 1.360219] [drm] HPD4
[ 1.360221] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953[ 1.360221] [drm] Encoders:
[ 1.360221] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.360222] [drm] Connector 1:
[ 1.360222] [drm] DP-2
[ 1.360223] [drm] HPD5
[ 1.360224] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f[ 1.360224] [drm] Encoders:
[ 1.360224] [drm] DFP2: INTERNAL_UNIPHY1
[ 1.360225] [drm] Connector 2:
[ 1.360225] [drm] DP-3
[ 1.360225] [drm] HPD1
[ 1.360226] [drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b[ 1.360226] [drm] Encoders:
[ 1.360227] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.360227] [drm] Connector 3:
[ 1.360228] [drm] DP-4
[ 1.360228] [drm] HPD2
[ 1.360229] [drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963[ 1.360229] [drm] Encoders:
[ 1.360230] [drm] DFP4: INTERNAL_UNIPHY
[ 1.362102] amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff9f12df7c5010
[ 1.362151] amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff9f12df7c5020
[ 1.362195] amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff9f12df7c5030
[ 1.362240] amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff9f12df7c5040
[ 1.362274] amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff9f12df7c5050
[ 1.362421] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
[ 1.362424] [drm] PCIE gen 2 link speeds already enabled
[ 1.366793] i8042: PNP: No PS/2 controller found.
[ 1.366794] i8042: Probing ports directly.
[ 1.369551] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.369594] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.371854] SCSI subsystem initialized
[ 1.371876] ACPI: bus type USB registered
[ 1.371905] usbcore: registered new interface driver usbfs
[ 1.371916] usbcore: registered new interface driver hub
[ 1.371963] usbcore: registered new device driver usb
[ 1.372635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.372941] ehci-pci: EHCI PCI platform driver
[ 1.373170] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.373178] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1[ 1.373190] ehci-pci 0000:00:1a.7: debug port 1
[ 1.377091] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.377112] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.377201] libata version 3.00 loaded.
[ 1.390029] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.390189] hub 1-0:1.0: USB hub found
[ 1.390196] hub 1-0:1.0: 6 ports detected
[ 1.390355] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.390362] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2[ 1.390480] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 1.390748] hub 2-0:1.0: USB hub found
[ 1.390754] hub 2-0:1.0: 2 ports detected
[ 1.390829] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.390832] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3[ 1.390841] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.390847] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4[ 1.390857] ehci-pci 0000:00:1d.7: debug port 1
[ 1.393858] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.394026] hub 3-0:1.0: USB hub found
[ 1.394041] hub 3-0:1.0: 2 ports detected
[ 1.394758] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.394776] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.406685] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.406833] hub 4-0:1.0: USB hub found
[ 1.406841] hub 4-0:1.0: 6 ports detected
[ 1.407023] ahci 0000:00:1f.2: version 3.0
[ 1.407233] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.407286] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.407332] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.407335] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems sxs
[ 1.407421] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.443587] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.457467] scsi host0: ahci
[ 1.457765] scsi host1: ahci
[ 1.458049] scsi host2: ahci
[ 1.458240] scsi host3: ahci
[ 1.458412] scsi host4: ahci
[ 1.458513] scsi host5: ahci
[ 1.458557] ata1: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc100 irq 35[ 1.458559] ata2: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc180 irq 35[ 1.458560] ata3: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc200 irq 35[ 1.458562] ata4: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc280 irq 35[ 1.458563] ata5: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc300 irq 35[ 1.458564] ata6: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc380 irq 35[ 1.458771] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.458776] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5[ 1.458778] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 1.458782] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.458803] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 1.459067] hub 5-0:1.0: USB hub found
[ 1.459131] hub 5-0:1.0: 2 ports detected
[ 1.459353] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.459356] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6[ 1.459361] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.459382] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 1.459605] hub 6-0:1.0: USB hub found
[ 1.459620] hub 6-0:1.0: 2 ports detected
[ 1.459878] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.459883] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7[ 1.459888] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.459908] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 1.460136] hub 7-0:1.0: USB hub found
[ 1.460155] hub 7-0:1.0: 2 ports detected
[ 1.460420] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.460424] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8[ 1.460429] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.460446] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 1.460658] hub 8-0:1.0: USB hub found
[ 1.460675] hub 8-0:1.0: 2 ports detected
[ 1.460880] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.460885] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9[ 1.460890] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.460906] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 1.461029] hub 9-0:1.0: USB hub found
[ 1.461034] hub 9-0:1.0: 2 ports detected
[ 1.461200] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.461204] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 1.463681] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.463708] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 1.463877] hub 10-0:1.0: USB hub found
[ 1.463882] hub 10-0:1.0: 2 ports detected
[ 1.468973] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode
[ 1.468975] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 1.469712] scsi host6: ahci
[ 1.469811] scsi host7: ahci
[ 1.469884] scsi host8: ahci
[ 1.469957] scsi host9: ahci
[ 1.470037] scsi host10: ahci
[ 1.470114] scsi host11: ahci
[ 1.470180] scsi host12: ahci
[ 1.470265] scsi host13: ahci
[ 1.470301] ata7: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff100 irq 37[ 1.470303] ata8: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff180 irq 37[ 1.470304] ata9: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff200 irq 37[ 1.470305] ata10: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff280 irq 37
[ 1.470307] ata11: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff300 irq 37
[ 1.470308] ata12: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff380 irq 37
[ 1.470309] ata13: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff400 irq 37
[ 1.470311] ata14: SATA max UDMA/133 abar m2048@0xfbaff000 port 0xfbaff480 irq 37
[ 1.470464] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.470466] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.470683] scsi host14: ahci
[ 1.470756] scsi host15: ahci
[ 1.470791] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16[ 1.470794] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16[ 1.578896] [drm] ring test on 0 succeeded in 10 usecs
[ 1.580903] [drm] ring test on 1 succeeded in 1 usecs
[ 1.580908] [drm] ring test on 2 succeeded in 1 usecs
[ 1.580916] [drm] ring test on 3 succeeded in 3 usecs
[ 1.580924] [drm] ring test on 4 succeeded in 3 usecs
[ 1.581196] [drm] ib test on ring 0 succeeded
[ 1.581213] [drm] ib test on ring 1 succeeded
[ 1.581230] [drm] ib test on ring 2 succeeded
[ 1.581245] [drm] ib test on ring 3 succeeded
[ 1.581258] [drm] ib test on ring 4 succeeded
[ 1.582139] [drm:si_dpm_set_power_state [amdgpu]] *ERROR* si_enable_smc_cac failed
[ 1.727023] usb 4-5: new high-speed USB device number 2 using ehci-pci
[ 1.755361] [drm] fb mappable at 0xD0644000
[ 1.755363] [drm] vram apper at 0xD0000000
[ 1.755364] [drm] size 8294400
[ 1.755365] [drm] fb depth is 24
[ 1.755365] [drm] pitch is 7680
[ 1.755588] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.784783] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.784801] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.784845] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.784859] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.784861] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.784881] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.784892] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.784900] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.784915] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.784929] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.785054] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.785326] ata14.00: configured for UDMA/66
[ 1.868983] usb-storage 4-5:1.0: USB Mass Storage device detected
[ 1.869102] scsi host16: usb-storage 4-5:1.0
[ 1.869177] usbcore: registered new interface driver usb-storage
[ 1.869545] usbcore: registered new interface driver uas
[ 1.913450] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 1.923458] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.925081] ata1.00: ATAPI: Optiarc DVD RW AD-7260S, 1.01, max UDMA/100
[ 1.927024] ata1.00: configured for UDMA/100
[ 1.928777] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.01 PQ: 0 ANSI: 5
[ 1.958464] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.958466] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.958602] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.994022] [drm:si_dpm_set_power_state [amdgpu]] *ERROR* si_enable_smc_cac failed
[ 1.994431] firewire_core 0000:07:02.0: created device fw0: GUID 001fc6000006bbc0, S400
[ 2.113427] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.120488] usbcore: registered new interface driver usbhid
[ 2.120489] usbhid: USB HID core driver
[ 2.121279] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input2
[ 2.222436] Console: switching to colour frame buffer device 240x67
[ 2.226833] amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
[ 2.247019] [drm] Initialized amdgpu 3.18.0 20150101 for 0000:03:00.0 on minor 0[ 2.247557] input: Logitech M510 as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/0003:046D:1025.0004/input/input2
[ 2.247630] logitech-hidpp-device 0003:046D:1025.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:1a.2-1:1
[ 2.253698] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.266999] tsc: Refined TSC clocksource calibration: 3073.635 MHz
[ 2.267011] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c4dfd9afb6, max_idle_ns: 440795215205 ns
[ 2.569742] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.856864] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 2.878032] scsi 16:0:0:0: Direct-Access WD 3200AAK External 1.65 PQ: 0 ANSI: 4
[ 2.880369] sd 16:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.881365] sd 16:0:0:0: [sda] Write Protect is off
[ 2.881367] sd 16:0:0:0: [sda] Mode Sense: 21 00 00 00
[ 2.882363] sd 16:0:0:0: [sda] No Caching mode page found
[ 2.882389] sd 16:0:0:0: [sda] Assuming drive cache: write through
[ 2.885618] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.887996] sda: sda1
[ 2.891274] sd 16:0:0:0: [sda] Attached SCSI disk
[ 3.056102] logitech-djreceiver 0003:046D:C52B.0007: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-2/input2
[ 3.180680] input: Logitech K360 as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.2/0003:046D:C52B.0007/0003:046D:4004.0008/input/input3
[ 3.180846] logitech-hidpp-device 0003:046D:4004.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:1a.2-2:1
[ 3.277280] clocksource: Switched to clocksource tsc
[ 3.360232] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.368168] ata5.00: ATA-8: KINGSTON SV300S37A120G, 605ABBF2, max UDMA/133
[ 3.368171] ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.374207] ata5.00: configured for UDMA/133
[ 3.374636] scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF2 PQ: 0 ANSI: 5
[ 3.431016] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.431076] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.431079] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.431313] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.433935] sdb: sdb1 sdb2
[ 3.434992] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.494284] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.903894] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.911760] ata6.00: ATA-8: KINGSTON SV300S37A120G, 605ABBF2, max UDMA/133
[ 3.911762] ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.917774] ata6.00: configured for UDMA/133
[ 3.918206] scsi 5:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF2 PQ: 0 ANSI: 5
[ 3.960854] sd 5:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.960956] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 3.960973] sd 5:0:0:0: [sdc] Write Protect is off
[ 3.960976] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.961147] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.962354] sdc: sdc1 sdc2
[ 3.963498] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 4.019585] systemd-journald[144]: Received SIGTERM from PID 1 (systemd).
[ 4.036193] systemd: 18 output lines suppressed due to ratelimiting
[ 4.142472] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.269034] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 4.295048] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.295084] sd 16:0:0:0: Attached scsi generic sg1 type 0
[ 4.295118] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.295154] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 4.295189] scsi 13:0:0:0: Attached scsi generic sg4 type 3
[ 4.298783] loop: module loaded
[ 4.307715] vboxdrv: loading out-of-tree module taints kernel.
[ 4.310095] vboxdrv: Found 8 processor cores
[ 4.330373] vboxdrv: TSC mode is Invariant, tentative frequency 3073618359 Hz
[ 4.330374] vboxdrv: Successfully loaded version 5.2.0 (interface 0x00290000)
[ 4.331152] VBoxPciLinuxInit
[ 4.332654] vboxpci: IOMMU not found (not registered)
[ 4.333144] VBoxNetAdp: Successfully started.
[ 4.333866] VBoxNetFlt: Successfully started.
[ 4.364800] systemd-journald[286]: Received request to flush runtime journal from PID 1
[ 4.757134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 4.757148] ACPI: Power Button [PWRB]
[ 4.757207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5[ 4.757238] ACPI: Power Button [PWRF]
[ 4.761265] ATK0110 ATK0110:00: Overriding interface detection
[ 4.761416] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.773478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.800045] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[ 4.800253] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 4.800261] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 4.800503] i5500_temp 0000:00:14.3: Sensor seems to be disabled
[ 4.817325] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170531/utaddress-247)
[ 4.817333] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.817335] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170531/utaddress-247)
[ 4.817339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.817340] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170531/utaddress-247)
[ 4.817343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.817344] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.817935] ACPI Warning: SystemIO range 0x0000000000001000-0x000000000000101F conflicts with OpRegion 0x0000000000001000-0x000000000000100F (\SMRG) (20170531/utaddress-247)
[ 4.817941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.818225] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.828535] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.828622] r8169 0000:07:01.0 (unnamed net_device) (uninitialized): not PCI Express
[ 4.829360] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffb797032f1000, bc:ae:c5:17:6e:fd, XID 18000000 IRQ 19
[ 4.829362] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 4.873886] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.874545] iTCO_vendor_support: vendor-support=0
[ 4.875907] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.876014] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 4.876557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.890936] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[ 4.890939] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 4.896950] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.896952] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.896957] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.896959] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.896960] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 4.896961] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.896963] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.896964] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.896969] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.900143] mousedev: PS/2 mouse device common for all mice
[ 4.905044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input8
[ 4.905112] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input9
[ 4.905172] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input10
[ 4.905236] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input11
[ 4.905298] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input12
[ 4.905354] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 4.917512] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.917554] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.917594] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.917665] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.917732] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.917812] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 4.917912] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 4.917984] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 5.094294] r8169 0000:07:01.0 eth0: link down
[ 5.094295] r8169 0000:07:01.0 eth0: link down
[ 5.094349] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.072303] r8169 0000:07:01.0 eth0: link up
[ 8.072314] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.929587] logitech-hidpp-device 0003:046D:4004.0008: HID++ 2.0 device connected.
[ 29.164454] random: crng init done
[ 109.995591] logitech-hidpp-device 0003:046D:1025.0004: HID++ 1.0 device connected.
[ 561.990064] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 769.990874] perf: interrupt took too long (3142 > 3138), lowering kernel.perf_event_max_sample_rate to 63600
[ 1219.854678] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 2.568 msecs
[ 1219.854682] perf: interrupt took too long (23495 > 3927), lowering kernel.perf_event_max_sample_rate to 8400
[ 1307.696348] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.543 msecs
[ 1699.924755] [drm:si_dpm_set_power_state [amdgpu]] *ERROR* si_enable_smc_cac failed
Xorg Log:
[ 662.428]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 662.440] X Protocol Version 11, Revision 0
[ 662.443] Build Operating System: Linux 4.9.54-1-lts x86_64
[ 662.446] Current Operating System: Linux box 4.13.11-1-ARCH #1 SMP PREEMPT Thu Nov 2 10:25:56 CET 2017 x86_64
[ 662.446] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=LABEL=COPPER rw amdgpu.si_support=1 radeon.si_support=0 initrd=../initramfs-linux.img
[ 662.455] Build Date: 12 October 2017 09:59:53PM
[ 662.458]
[ 662.461] Current version of pixman: 0.34.0
[ 662.467] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 662.467] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 662.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 4 09:59:39 2017
[ 662.483] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 662.486] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 662.488] (==) No Layout section. Using the first Screen section.
[ 662.488] (==) No screen section available. Using defaults.
[ 662.488] (**) |-->Screen "Default Screen Section" (0)
[ 662.488] (**) | |-->Monitor "<default monitor>"
[ 662.488] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 662.488] (**) | |-->Device "AMD Graphics"
[ 662.488] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 662.488] (==) Automatically adding devices
[ 662.488] (==) Automatically enabling devices
[ 662.488] (==) Automatically adding GPU devices
[ 662.488] (==) Automatically binding GPU devices
[ 662.488] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 662.488] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 662.488] Entry deleted from font path.
[ 662.489] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 662.489] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 662.489] Entry deleted from font path.
[ 662.489] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 662.489] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 662.489] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 662.489] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.[ 662.489] (II) Loader magic: 0x555cf6b14d60
[ 662.489] (II) Module ABI versions:
[ 662.489] X.Org ANSI C Emulation: 0.4
[ 662.489] X.Org Video Driver: 23.0
[ 662.489] X.Org XInput driver : 24.1
[ 662.489] X.Org Server Extension : 10.0
[ 662.490] (++) using VT number 1
[ 662.490] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 662.493] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 662.493] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 662.494] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 662.499] (--) PCI:*(0:3:0:0) 1002:682c:1002:2b1e rev 0, Mem @ 0xd0000000/268435456, 0xfbc80000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 662.499] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 662.499] (II) LoadModule: "glx"
[ 662.499] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 662.517] (II) Module glx: vendor="X.Org Foundation"
[ 662.517] compiled for 1.19.5, module version = 1.0.0
[ 662.517] ABI class: X.Org Server Extension, version 10.0
[ 662.517] (II) LoadModule: "amdgpu"
[ 662.518] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 662.520] (II) Module amdgpu: vendor="X.Org Foundation"
[ 662.520] compiled for 1.19.3, module version = 1.4.0
[ 662.520] Module class: X.Org Video Driver
[ 662.520] ABI class: X.Org Video Driver, version 23.0
[ 662.520] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 662.520] (II) [KMS] Kernel modesetting enabled.
[ 662.520] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 662.520] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 662.520] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 662.520] (==) AMDGPU(0): Default visual is TrueColor
[ 662.520] (**) AMDGPU(0): Option "DRI" "3"
[ 662.520] (==) AMDGPU(0): RGB weight 888
[ 662.520] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 662.520] (--) AMDGPU(0): Chipset: "AMD FirePro W4100" (ChipID = 0x682c)
[ 662.520] (II) Loading sub module "fb"
[ 662.520] (II) LoadModule: "fb"
[ 662.520] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 662.524] (II) Module fb: vendor="X.Org Foundation"
[ 662.524] compiled for 1.19.5, module version = 1.0.0
[ 662.524] ABI class: X.Org ANSI C Emulation, version 0.4
[ 662.524] (II) Loading sub module "dri2"
[ 662.524] (II) LoadModule: "dri2"
[ 662.524] (II) Module "dri2" already built-in
[ 662.637] (II) Loading sub module "glamoregl"
[ 662.637] (II) LoadModule: "glamoregl"
[ 662.637] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 662.637] (II) Module glamoregl: vendor="X.Org Foundation"
[ 662.637] compiled for 1.19.5, module version = 1.0.0
[ 662.637] ABI class: X.Org ANSI C Emulation, version 0.4
[ 662.637] (II) glamor: OpenGL accelerated X.org driver based.
[ 662.638] (EE) AMDGPU(0): eglGetDisplay() failed
[ 662.638] (EE) AMDGPU(0): glamor detected, failed to initialize EGL.
[ 662.638] (II) Loading sub module "shadow"
[ 662.638] (II) LoadModule: "shadow"
[ 662.638] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 662.638] (II) Module shadow: vendor="X.Org Foundation"
[ 662.638] compiled for 1.19.5, module version = 1.1.0
[ 662.638] ABI class: X.Org ANSI C Emulation, version 0.4
[ 662.638] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 662.679] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 662.724] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 662.766] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 662.807] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[ 662.851] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 662.851] (II) AMDGPU(0): Manufacturer: AOC Model: 2267 Serial#: 407
[ 662.851] (II) AMDGPU(0): Year: 2016 Week: 38
[ 662.851] (II) AMDGPU(0): EDID Version: 1.3
[ 662.851] (II) AMDGPU(0): Digital Display Input
[ 662.851] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 662.851] (II) AMDGPU(0): Gamma: 2.20
[ 662.851] (II) AMDGPU(0): DPMS capabilities: Off
[ 662.851] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 662.851] (II) AMDGPU(0): First detailed timing is preferred mode
[ 662.851] (II) AMDGPU(0): redX: 0.641 redY: 0.337 greenX: 0.313 greenY: 0.623
[ 662.851] (II) AMDGPU(0): blueX: 0.151 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 662.851] (II) AMDGPU(0): Supported established timings:
[ 662.851] (II) AMDGPU(0): 720x400@70Hz
[ 662.851] (II) AMDGPU(0): 640x480@60Hz
[ 662.851] (II) AMDGPU(0): 640x480@67Hz
[ 662.851] (II) AMDGPU(0): 640x480@72Hz
[ 662.851] (II) AMDGPU(0): 640x480@75Hz
[ 662.851] (II) AMDGPU(0): 800x600@56Hz
[ 662.851] (II) AMDGPU(0): 800x600@60Hz
[ 662.851] (II) AMDGPU(0): 800x600@72Hz
[ 662.851] (II) AMDGPU(0): 800x600@75Hz
[ 662.851] (II) AMDGPU(0): 832x624@75Hz
[ 662.851] (II) AMDGPU(0): 1024x768@60Hz
[ 662.851] (II) AMDGPU(0): 1024x768@70Hz
[ 662.851] (II) AMDGPU(0): 1024x768@75Hz
[ 662.851] (II) AMDGPU(0): 1280x1024@75Hz
[ 662.851] (II) AMDGPU(0): Manufacturer's mask: 0
[ 662.851] (II) AMDGPU(0): Supported standard timings:
[ 662.851] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 662.851] (II) AMDGPU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 662.851] (II) AMDGPU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 662.851] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 662.851] (II) AMDGPU(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 662.851] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 662.851] (II) AMDGPU(0): Supported detailed timing:
[ 662.851] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
[ 662.851] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 662.851] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 662.851] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 662.851] (II) AMDGPU(0): Monitor name: 2267W
[ 662.851] (II) AMDGPU(0): Serial No: ALHG99A000407
[ 662.851] (II) AMDGPU(0): EDID (in hex):
[ 662.851] (II) AMDGPU(0): 00ffffffffffff0005e3672297010000
[ 662.851] (II) AMDGPU(0): 261a010380301b782a16c5a456509f26
[ 662.851] (II) AMDGPU(0): 125054bfef00d1c0b300950081808140
[ 662.851] (II) AMDGPU(0): 81c001010101023a801871382d40582c
[ 662.851] (II) AMDGPU(0): 4500dc0c1100001e000000fd00324c1e
[ 662.851] (II) AMDGPU(0): 5311000a202020202020000000fc0032
[ 662.851] (II) AMDGPU(0): 323637570a20202020202020000000ff
[ 662.851] (II) AMDGPU(0): 00414c48473939413030303430370086
[ 662.851] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 662.851] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 662.851] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 662.851] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 662.894] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 662.894] (II) AMDGPU(0): Manufacturer: AOC Model: 2267 Serial#: 408
[ 662.894] (II) AMDGPU(0): Year: 2016 Week: 38
[ 662.894] (II) AMDGPU(0): EDID Version: 1.3
[ 662.894] (II) AMDGPU(0): Digital Display Input
[ 662.894] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 662.894] (II) AMDGPU(0): Gamma: 2.20
[ 662.894] (II) AMDGPU(0): DPMS capabilities: Off
[ 662.894] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 662.894] (II) AMDGPU(0): First detailed timing is preferred mode
[ 662.894] (II) AMDGPU(0): redX: 0.641 redY: 0.337 greenX: 0.313 greenY: 0.623
[ 662.894] (II) AMDGPU(0): blueX: 0.151 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 662.894] (II) AMDGPU(0): Supported established timings:
[ 662.894] (II) AMDGPU(0): 720x400@70Hz
[ 662.894] (II) AMDGPU(0): 640x480@60Hz
[ 662.894] (II) AMDGPU(0): 640x480@67Hz
[ 662.894] (II) AMDGPU(0): 640x480@72Hz
[ 662.894] (II) AMDGPU(0): 640x480@75Hz
[ 662.894] (II) AMDGPU(0): 800x600@56Hz
[ 662.894] (II) AMDGPU(0): 800x600@60Hz
[ 662.894] (II) AMDGPU(0): 800x600@72Hz
[ 662.894] (II) AMDGPU(0): 800x600@75Hz
[ 662.894] (II) AMDGPU(0): 832x624@75Hz
[ 662.894] (II) AMDGPU(0): 1024x768@60Hz
[ 662.894] (II) AMDGPU(0): 1024x768@70Hz
[ 662.894] (II) AMDGPU(0): 1024x768@75Hz
[ 662.894] (II) AMDGPU(0): 1280x1024@75Hz
[ 662.894] (II) AMDGPU(0): Manufacturer's mask: 0
[ 662.894] (II) AMDGPU(0): Supported standard timings:
[ 662.894] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 662.894] (II) AMDGPU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 662.894] (II) AMDGPU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 662.894] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 662.894] (II) AMDGPU(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 662.894] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 662.894] (II) AMDGPU(0): Supported detailed timing:
[ 662.894] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
[ 662.894] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 662.894] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 662.894] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 662.894] (II) AMDGPU(0): Monitor name: 2267W
[ 662.894] (II) AMDGPU(0): Serial No: ALHG99A000408
[ 662.894] (II) AMDGPU(0): EDID (in hex):
[ 662.894] (II) AMDGPU(0): 00ffffffffffff0005e3672298010000
[ 662.894] (II) AMDGPU(0): 261a010380301b782a16c5a456509f26
[ 662.894] (II) AMDGPU(0): 125054bfef00d1c0b300950081808140
[ 662.894] (II) AMDGPU(0): 81c001010101023a801871382d40582c
[ 662.894] (II) AMDGPU(0): 4500dc0c1100001e000000fd00324c1e
[ 662.894] (II) AMDGPU(0): 5311000a202020202020000000fc0032
[ 662.894] (II) AMDGPU(0): 323637570a20202020202020000000ff
[ 662.894] (II) AMDGPU(0): 00414c48473939413030303430380084
[ 662.894] (II) AMDGPU(0): Printing probed modes for output DisplayPort-1
[ 662.894] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 662.894] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 662.894] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 662.937] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 662.937] (II) AMDGPU(0): Manufacturer: AOC Model: 2267 Serial#: 404
[ 662.937] (II) AMDGPU(0): Year: 2016 Week: 38
[ 662.937] (II) AMDGPU(0): EDID Version: 1.3
[ 662.937] (II) AMDGPU(0): Digital Display Input
[ 662.937] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 662.937] (II) AMDGPU(0): Gamma: 2.20
[ 662.937] (II) AMDGPU(0): DPMS capabilities: Off
[ 662.937] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 662.937] (II) AMDGPU(0): First detailed timing is preferred mode
[ 662.937] (II) AMDGPU(0): redX: 0.641 redY: 0.337 greenX: 0.313 greenY: 0.623
[ 662.937] (II) AMDGPU(0): blueX: 0.151 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 662.937] (II) AMDGPU(0): Supported established timings:
[ 662.937] (II) AMDGPU(0): 720x400@70Hz
[ 662.937] (II) AMDGPU(0): 640x480@60Hz
[ 662.937] (II) AMDGPU(0): 640x480@67Hz
[ 662.937] (II) AMDGPU(0): 640x480@72Hz
[ 662.937] (II) AMDGPU(0): 640x480@75Hz
[ 662.937] (II) AMDGPU(0): 800x600@56Hz
[ 662.937] (II) AMDGPU(0): 800x600@60Hz
[ 662.937] (II) AMDGPU(0): 800x600@72Hz
[ 662.937] (II) AMDGPU(0): 800x600@75Hz
[ 662.937] (II) AMDGPU(0): 832x624@75Hz
[ 662.937] (II) AMDGPU(0): 1024x768@60Hz
[ 662.937] (II) AMDGPU(0): 1024x768@70Hz
[ 662.937] (II) AMDGPU(0): 1024x768@75Hz
[ 662.937] (II) AMDGPU(0): 1280x1024@75Hz
[ 662.937] (II) AMDGPU(0): Manufacturer's mask: 0
[ 662.937] (II) AMDGPU(0): Supported standard timings:
[ 662.937] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 662.937] (II) AMDGPU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 662.937] (II) AMDGPU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 662.937] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 662.937] (II) AMDGPU(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 662.937] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 662.937] (II) AMDGPU(0): Supported detailed timing:
[ 662.937] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
[ 662.937] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 662.937] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 662.937] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 662.937] (II) AMDGPU(0): Monitor name: 2267W
[ 662.937] (II) AMDGPU(0): Serial No: ALHG99A000404
[ 662.937] (II) AMDGPU(0): EDID (in hex):
[ 662.937] (II) AMDGPU(0): 00ffffffffffff0005e3672294010000
[ 662.937] (II) AMDGPU(0): 261a010380301b782a16c5a456509f26
[ 662.937] (II) AMDGPU(0): 125054bfef00d1c0b300950081808140
[ 662.937] (II) AMDGPU(0): 81c001010101023a801871382d40582c
[ 662.937] (II) AMDGPU(0): 4500dc0c1100001e000000fd00324c1e
[ 662.937] (II) AMDGPU(0): 5311000a202020202020000000fc0032
[ 662.937] (II) AMDGPU(0): 323637570a20202020202020000000ff
[ 662.937] (II) AMDGPU(0): 00414c4847393941303030343034008c
[ 662.937] (II) AMDGPU(0): Printing probed modes for output DisplayPort-2
[ 662.937] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 662.937] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 662.937] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 662.980] (II) AMDGPU(0): EDID for output DisplayPort-3
[ 662.980] (II) AMDGPU(0): Manufacturer: AOC Model: 2267 Serial#: 241
[ 662.980] (II) AMDGPU(0): Year: 2016 Week: 38
[ 662.980] (II) AMDGPU(0): EDID Version: 1.3
[ 662.980] (II) AMDGPU(0): Digital Display Input
[ 662.980] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 662.980] (II) AMDGPU(0): Gamma: 2.20
[ 662.980] (II) AMDGPU(0): DPMS capabilities: Off
[ 662.980] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 662.980] (II) AMDGPU(0): First detailed timing is preferred mode
[ 662.980] (II) AMDGPU(0): redX: 0.641 redY: 0.337 greenX: 0.313 greenY: 0.623
[ 662.980] (II) AMDGPU(0): blueX: 0.151 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 662.980] (II) AMDGPU(0): Supported established timings:
[ 662.980] (II) AMDGPU(0): 720x400@70Hz
[ 662.980] (II) AMDGPU(0): 640x480@60Hz
[ 662.980] (II) AMDGPU(0): 640x480@67Hz
[ 662.980] (II) AMDGPU(0): 640x480@72Hz
[ 662.980] (II) AMDGPU(0): 640x480@75Hz
[ 662.980] (II) AMDGPU(0): 800x600@56Hz
[ 662.980] (II) AMDGPU(0): 800x600@60Hz
[ 662.980] (II) AMDGPU(0): 800x600@72Hz
[ 662.980] (II) AMDGPU(0): 800x600@75Hz
[ 662.980] (II) AMDGPU(0): 832x624@75Hz
[ 662.980] (II) AMDGPU(0): 1024x768@60Hz
[ 662.980] (II) AMDGPU(0): 1024x768@70Hz
[ 662.981] (II) AMDGPU(0): 1024x768@75Hz
[ 662.981] (II) AMDGPU(0): 1280x1024@75Hz
[ 662.981] (II) AMDGPU(0): Manufacturer's mask: 0
[ 662.981] (II) AMDGPU(0): Supported standard timings:
[ 662.981] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 662.981] (II) AMDGPU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 662.981] (II) AMDGPU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 662.981] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 662.981] (II) AMDGPU(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 662.981] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 662.981] (II) AMDGPU(0): Supported detailed timing:
[ 662.981] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
[ 662.981] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 662.981] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 662.981] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 662.981] (II) AMDGPU(0): Monitor name: 2267W
[ 662.981] (II) AMDGPU(0): Serial No: ALHG99A000241
[ 662.981] (II) AMDGPU(0): EDID (in hex):
[ 662.981] (II) AMDGPU(0): 00ffffffffffff0005e36722f1000000
[ 662.981] (II) AMDGPU(0): 261a010380301b782a16c5a456509f26
[ 662.981] (II) AMDGPU(0): 125054bfef00d1c0b300950081808140
[ 662.981] (II) AMDGPU(0): 81c001010101023a801871382d40582c
[ 662.981] (II) AMDGPU(0): 4500dc0c1100001e000000fd00324c1e
[ 662.981] (II) AMDGPU(0): 5311000a202020202020000000fc0032
[ 662.981] (II) AMDGPU(0): 323637570a20202020202020000000ff
[ 662.981] (II) AMDGPU(0): 00414c48473939413030303234310031
[ 662.981] (II) AMDGPU(0): Printing probed modes for output DisplayPort-3
[ 662.981] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 662.981] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 662.981] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 662.981] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 662.981] (II) AMDGPU(0): Output DisplayPort-1 connected
[ 662.981] (II) AMDGPU(0): Output DisplayPort-2 connected
[ 662.981] (II) AMDGPU(0): Output DisplayPort-3 connected
[ 662.981] (II) AMDGPU(0): Using spanning desktop for initial modes
[ 662.981] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 1920x1080 +0+0[ 662.981] (II) AMDGPU(0): Output DisplayPort-1 using initial mode 1920x1080 +1920+0
[ 662.981] (II) AMDGPU(0): Output DisplayPort-2 using initial mode 1920x1080 +3840+0
[ 662.981] (II) AMDGPU(0): Output DisplayPort-3 using initial mode 1920x1080 +5760+0
[ 662.981] (II) AMDGPU(0): mem size init: gart size :bfee5000 vram size: s:7f1d4000 visible:f1d4000
[ 662.981] (==) AMDGPU(0): DPI set to (96, 96)
[ 662.981] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 662.981] (II) Loading sub module "ramdac"
[ 662.981] (II) LoadModule: "ramdac"
[ 662.981] (II) Module "ramdac" already built-in
[ 662.981] (--) Depth 24 pixmap format is 32 bpp
[ 662.981] (II) AMDGPU(0): Front buffer pitch: 30720 bytes
[ 662.981] (==) AMDGPU(0): DRI3 disabled
[ 662.981] (==) AMDGPU(0): Backing store enabled
[ 662.981] (WW) AMDGPU(0): Direct rendering disabled
[ 662.981] (II) AMDGPU(0): 2D and 3D acceleration disabled
[ 662.981] (==) AMDGPU(0): DPMS enabled
[ 662.981] (==) AMDGPU(0): Silken mouse enabled
[ 662.981] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 662.981] (--) RandR disabled
[ 662.984] (II) AIGLX: Screen 0 is not DRI2 capable
[ 662.984] (EE) AIGLX: reverting to software rendering
[ 662.985] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 662.986] (II) IGLX: Loaded and initialized swrast
[ 662.986] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 662.986] (II) AMDGPU(0): Setting screen physical size to 2032 x 285
[ 663.042] (II) config/udev: Adding input device Power Button (/dev/input/event3)[ 663.042] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 663.042] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 663.042] (II) LoadModule: "libinput"
[ 663.043] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 663.045] (II) Module libinput: vendor="X.Org Foundation"
[ 663.045] compiled for 1.19.3, module version = 0.26.0
[ 663.045] Module class: X.Org XInput Driver
[ 663.045] ABI class: X.Org XInput driver, version 24.1
[ 663.045] (II) Using input driver 'libinput' for 'Power Button'
[ 663.046] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0[ 663.046] (**) Power Button: always reports core events
[ 663.046] (**) Option "Device" "/dev/input/event3"
[ 663.046] (**) Option "_source" "server/udev"
[ 663.047] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 663.047] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 663.047] (II) event3 - (II) Power Button: (II) device removed
[ 663.047] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 663.047] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 663.047] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 663.047] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 663.050] (II) config/udev: Adding input device Power Button (/dev/input/event2)[ 663.050] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 663.050] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 663.050] (II) Using input driver 'libinput' for 'Power Button'
[ 663.051] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0[ 663.051] (**) Power Button: always reports core events
[ 663.051] (**) Option "Device" "/dev/input/event2"
[ 663.051] (**) Option "_source" "server/udev"
[ 663.051] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 663.052] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 663.052] (II) event2 - (II) Power Button: (II) device removed
[ 663.052] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 663.052] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 663.052] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 663.052] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 663.053] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
[ 663.053] (II) No input driver specified, ignoring this device.
[ 663.053] (II) This device may have been added with another device file.
[ 663.053] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
[ 663.053] (II) No input driver specified, ignoring this device.
[ 663.053] (II) This device may have been added with another device file.
[ 663.053] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
[ 663.053] (II) No input driver specified, ignoring this device.
[ 663.053] (II) This device may have been added with another device file.
[ 663.054] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event10)
[ 663.054] (II) No input driver specified, ignoring this device.
[ 663.054] (II) This device may have been added with another device file.
[ 663.054] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 663.054] (II) No input driver specified, ignoring this device.
[ 663.054] (II) This device may have been added with another device file.
[ 663.054] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
[ 663.054] (II) No input driver specified, ignoring this device.
[ 663.054] (II) This device may have been added with another device file.
[ 663.055] (II) config/udev: Adding input device Logitech M510 (/dev/input/event0)
[ 663.055] (**) Logitech M510: Applying InputClass "evdev pointer catchall"
[ 663.055] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
[ 663.055] (II) Using input driver 'libinput' for 'Logitech M510'
[ 663.056] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0[ 663.056] (**) Logitech M510: always reports core events
[ 663.056] (**) Option "Device" "/dev/input/event0"
[ 663.056] (**) Option "_source" "server/udev"
[ 663.056] (II) event0 - (II) Logitech M510: (II) is tagged by udev as: Mouse
[ 663.056] (II) event0 - (II) Logitech M510: (II) device set to 800 DPI
[ 663.056] (II) event0 - (II) Logitech M510: (II) device is a pointer
[ 663.056] (II) event0 - (II) Logitech M510: (II) device removed
[ 663.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/0003:046D:1025.0004/input/input2/event0"
[ 663.056] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 8)
[ 663.056] (**) Option "AccelerationScheme" "none"
[ 663.056] (**) Logitech M510: (accel) selected scheme none/0
[ 663.056] (**) Logitech M510: (accel) acceleration factor: 2.000
[ 663.056] (**) Logitech M510: (accel) acceleration threshold: 4
[ 663.057] (II) event0 - (II) Logitech M510: (II) is tagged by udev as: Mouse
[ 663.057] (II) event0 - (II) Logitech M510: (II) device set to 800 DPI
[ 663.057] (II) event0 - (II) Logitech M510: (II) device is a pointer
[ 663.057] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse0)
[ 663.057] (II) No input driver specified, ignoring this device.
[ 663.057] (II) This device may have been added with another device file.
[ 663.058] (II) config/udev: Adding input device Logitech K360 (/dev/input/event1)
[ 663.058] (**) Logitech K360: Applying InputClass "evdev keyboard catchall"
[ 663.058] (**) Logitech K360: Applying InputClass "libinput keyboard catchall"
[ 663.058] (II) Using input driver 'libinput' for 'Logitech K360'
[ 663.059] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0[ 663.059] (**) Logitech K360: always reports core events
[ 663.059] (**) Option "Device" "/dev/input/event1"
[ 663.059] (**) Option "_source" "server/udev"
[ 663.059] (II) event1 - (II) Logitech K360: (II) is tagged by udev as: Keyboard[ 663.059] (II) event1 - (II) Logitech K360: (II) device is a keyboard
[ 663.059] (II) event1 - (II) Logitech K360: (II) device removed
[ 663.059] (II) libinput: Logitech K360: needs a virtual subdevice
[ 663.059] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.2/0003:046D:C52B.0007/0003:046D:4004.0008/input/input3/event1"
[ 663.059] (II) XINPUT: Adding extended input device "Logitech K360" (type: MOUSE, id 9)
[ 663.059] (**) Option "AccelerationScheme" "none"
[ 663.059] (**) Logitech K360: (accel) selected scheme none/0
[ 663.059] (**) Logitech K360: (accel) acceleration factor: 2.000
[ 663.060] (**) Logitech K360: (accel) acceleration threshold: 4
[ 663.060] (II) event1 - (II) Logitech K360: (II) is tagged by udev as: Keyboard[ 663.060] (II) event1 - (II) Logitech K360: (II) device is a keyboard
[ 663.060] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event11)
[ 663.060] (II) No input driver specified, ignoring this device.
[ 663.060] (II) This device may have been added with another device file.
[ 663.061] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event12)
[ 663.061] (II) No input driver specified, ignoring this device.
[ 663.061] (II) This device may have been added with another device file.
[ 663.061] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event13)
[ 663.061] (II) No input driver specified, ignoring this device.
[ 663.061] (II) This device may have been added with another device file.
[ 663.061] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event14)
[ 663.061] (II) No input driver specified, ignoring this device.
[ 663.061] (II) This device may have been added with another device file.
[ 663.061] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event15)
[ 663.061] (II) No input driver specified, ignoring this device.
[ 663.061] (II) This device may have been added with another device file.
[ 663.062] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event16)
[ 663.062] (II) No input driver specified, ignoring this device.
[ 663.062] (II) This device may have been added with another device file.
[ 663.062] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event17)
[ 663.062] (II) No input driver specified, ignoring this device.
[ 663.062] (II) This device may have been added with another device file.
[ 663.062] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event18)
[ 663.062] (II) No input driver specified, ignoring this device.
[ 663.062] (II) This device may have been added with another device file.
[ 663.062] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 663.062] (II) No input driver specified, ignoring this device.
[ 663.062] (II) This device may have been added with another device file.
[ 663.068] (**) Logitech K360: Applying InputClass "evdev keyboard catchall"
[ 663.068] (**) Logitech K360: Applying InputClass "libinput keyboard catchall"
[ 663.068] (II) Using input driver 'libinput' for 'Logitech K360'
[ 663.068] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[ 663.068] (**) Logitech K360: always reports core events
[ 663.068] (**) Option "Device" "/dev/input/event1"
[ 663.068] (**) Option "_source" "_driver/libinput"
[ 663.068] (II) libinput: Logitech K360: is a virtual subdevice
[ 663.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.2/0003:046D:C52B.0007/0003:046D:4004.0008/input/input3/event1"
[ 663.068] (II) XINPUT: Adding extended input device "Logitech K360" (type: KEYBOARD, id 10)
It is not a Wayland session
Offline
[ 662.981] (==) AMDGPU(0): DRI3 disabled
[ 662.981] (WW) AMDGPU(0): Direct rendering disabled
[ 662.981] (II) AMDGPU(0): 2D and 3D acceleration disabled
[ 662.984] (II) AIGLX: Screen 0 is not DRI2 capable
[ 662.984] (EE) AIGLX: reverting to software rendering
[ 662.986] (II) GLX: Initialized DRISWRAST GL provider for screen 0
Do you use any relevant packages from AUR or conducted a partial update?
pacman -Qs 'mesa|llvm|amd|drm'
Try uninstalling xf86-video-amdgpu to use the modesetting driver.
Offline
I don't use any relevant packages from AUR that I know of and the Update was not partial.
pacman -Qs 'mesa|llvm|amd|drm'
local/clang 5.0.0-1
C language family frontend for LLVM
local/glu 9.0.0-4
Mesa OpenGL Utility library
local/lib32-glu 9.0.0-3
Mesa OpenGL utility library (32 bits)
local/lib32-libdrm 2.4.87-1
Userspace interface to kernel DRM services (32-bit)
local/lib32-libtxc_dxtn 1.0.1-5
S3 Texture Compression (S3TC) library for Mesa (32-bit)
local/lib32-llvm-libs 5.0.0-1
Low Level Virtual Machine (runtime library)(32-bit)
local/lib32-mesa 17.2.4-1
an open-source implementation of the OpenGL specification (32-bit)
local/libdrm 2.4.87-1
Userspace interface to kernel DRM services
local/libtxc_dxtn 1.0.1-6
S3 Texture Compression (S3TC) library for Mesa
local/llvm 5.0.0-1
Low Level Virtual Machine
local/llvm-libs 5.0.0-1
Low Level Virtual Machine (runtime libraries)
local/mesa 17.2.4-1
an open-source implementation of the OpenGL specification
local/mesa-demos 8.3.0-4
Mesa demos and tools incl. glxinfo + glxgears
local/opencl-mesa 17.2.4-1
OpenCL support for AMD/ATI Radeon mesa drivers
I uninstalled the xf86-video-amdgpu package and it didn't make any difference. I believe the AMDGPU module is built into the kernel, so I blacklisted it along with RADEON to try to use the modesetting driver and I can't get an X Session like that. I don't understand why all the trouble in the first place. I've been running the RADEON module with this Firepro W4100 card for over 2 years without any issues at all.
I appreciate your help, this issue is really starting to burn me.
Offline
xf86-video-amdgpu is NOT the kernel module, but the X11 driver - the X11 error messages should have changed after uninstalling this (but keeping the amdgpu module)
If you want to use the radeon kernel module, this "amdgpu.si_support=1 radeon.si_support=0" kernel parameter is what enforces using the amdgpu module in the first place. Why did you put it there?
Offline
Pages: 1