You are not logged in.

#1 2017-11-04 17:52:23

oeht
Member
Registered: 2017-11-04
Posts: 20

[SOLVED] Broadcom-driver error (b43)

Hello,

I'm new to archlinux and I really like the KISS-concept!

I've done the installation part 1 of the german arch wiki. I think this is about the full installation of https://wiki.archlinux.org/index.php/Installation_guide on my macbook air mid 2011 dualboot with ubuntu.

Now, I'm facing the following error after booting:

(...)Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1

I've already found this answer, but after

pacman -S broadcom-wl-dkms 

I'm no more able to connect to wifi with

wifi-menu

Before the installation of broadcom-wl-dkm, I was able to connect.

EDIT: Here is the output of dmesg:

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[    0.000000] Linux version 4.13.11-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Nov 2 10:25:56 CET 2017
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000007effffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007f718fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f939000-0x000000007f953fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f96b000-0x000000007f96efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f96f000-0x000000007f99afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f99b000-0x000000007f9affff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f9b0000-0x000000007f9dafff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000093200000-0x0000000093200fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v1.10 by Apple
[    0.000000] efi:  ACPI=0x7f96a000  ACPI 2.0=0x7f96a014  SMBIOS=0x7f71a000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Apple Inc. MacBookAir3,2/Mac-942C5DF58193131B, BIOS    MBA31.88Z.0061.B07.1201241641 01/24/12
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fef9 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask F80000000 uncachable
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff991800099000] 99000 size 24576
[    0.000000] BRK [0x6bd64000, 0x6bd64fff] PGTABLE
[    0.000000] BRK [0x6bd65000, 0x6bd65fff] PGTABLE
[    0.000000] BRK [0x6bd66000, 0x6bd66fff] PGTABLE
[    0.000000] BRK [0x6bd67000, 0x6bd67fff] PGTABLE
[    0.000000] BRK [0x6bd68000, 0x6bd68fff] PGTABLE
[    0.000000] BRK [0x6bd69000, 0x6bd69fff] PGTABLE
[    0.000000] BRK [0x6bd6a000, 0x6bd6afff] PGTABLE
[    0.000000] BRK [0x6bd6b000, 0x6bd6bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37332000-0x37990fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007F96A014 000024 (v02 APPLE )
[    0.000000] ACPI: XSDT 0x000000007F96A1C0 000084 (v01 APPLE  Apple00  00000061      01000013)
[    0.000000] ACPI: FACP 0x000000007F968000 0000F4 (v04 APPLE  Apple00  00000061 Loki 0000005F)
[    0.000000] ACPI: DSDT 0x000000007F95B000 00572C (v01 APPLE  MacBookA 00030001 INTL 20061109)
[    0.000000] ACPI: FACS 0x000000007F71E000 000040
[    0.000000] ACPI: FACS 0x000000007F71E000 000040
[    0.000000] ACPI: HPET 0x000000007F967000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 0x000000007F966000 000068 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 0x000000007F965000 000068 (v02 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 0x000000007F963000 0000A5 (v32 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 0x000000007F962000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 0x000000007F961000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 0x000000007F958000 000107 (v01 APPLE  SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007F957000 000024 (v01 APPLE  Apple    00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007F956000 0000FC (v01 APPLE  SDCard   00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007F954000 0004DC (v01 APPLE  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: MCFG 0x000000007F964000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fef8fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7fef4000-0x7fef8fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007fef8fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000006effffff]
[    0.000000]   node   0: [mem 0x000000007f000000-0x000000007f718fff]
[    0.000000]   node   0: [mem 0x000000007f939000-0x000000007f953fff]
[    0.000000]   node   0: [mem 0x000000007f96b000-0x000000007f96efff]
[    0.000000]   node   0: [mem 0x000000007f99b000-0x000000007f9affff]
[    0.000000]   node   0: [mem 0x000000007f9db000-0x000000007fef8fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fef8fff]
[    0.000000] On node 0 totalpages: 457737
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7090 pages used for memmap
[    0.000000]   DMA32 zone: 453739 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f000000-0x7effffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f719000-0x7f938fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f954000-0x7f96afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f96f000-0x7f99afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f9b0000-0x7f9dafff]
[    0.000000] e820: [mem 0x93201000-0xffbfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff99186c600000 s106520 r8192 d32744 u1048576
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 450560
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1732260K/1830948K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 98688K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 28354 entries in 111 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000]     Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 1858.401 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3718.66 BogoMIPS (lpj=6194670)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.009378] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.047949] Security Framework initialized
[    0.047950] Yama: becoming mindful.
[    0.048772] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.049173] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.049195] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.049208] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.049480] CPU: Physical Processor ID: 0
[    0.049481] CPU: Processor Core ID: 0
[    0.049483] mce: CPU supports 6 MCE banks
[    0.049490] CPU0: Thermal monitoring enabled (TM2)
[    0.049493] process: using mwait in idle threads
[    0.049497] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.049499] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.049629] Freeing SMP alternatives memory: 24K
[    0.052791] smpboot: Max logical packages: 1
[    0.053254] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086666] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     L9400  @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.096676] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.096686] ... version:                2
[    0.096687] ... bit width:              40
[    0.096688] ... generic registers:      2
[    0.096689] ... value mask:             000000ffffffffff
[    0.096690] ... max period:             000000007fffffff
[    0.096691] ... fixed-purpose events:   3
[    0.096692] ... event mask:             0000000700000003
[    0.103337] Hierarchical SRCU implementation.
[    0.116756] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.123337] smp: Bringing up secondary CPUs ...
[    0.150018] x86: Booting SMP configuration:
[    0.150020] .... node  #0, CPUs:      #1
[    0.235364] smp: Brought up 1 node, 2 CPUs
[    0.235364] smpboot: Total of 2 processors activated (7436.10 BogoMIPS)
[    0.236871] devtmpfs: initialized
[    0.236871] x86/mm: Memory block size: 128MB
[    0.240005] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.240005] PM: Registering ACPI NVS region [mem 0x7f719000-0x7f938fff] (2228224 bytes)
[    0.240005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.240005] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.240005] pinctrl core: initialized pinctrl subsystem
[    0.240005] RTC time:  7:37:04, date: 11/05/17
[    0.240005] NET: Registered protocol family 16
[    0.240015] cpuidle: using governor ladder
[    0.243339] cpuidle: using governor menu
[    0.243339] PCCT header not found.
[    0.243362] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.243363] ACPI: bus type PCI registered
[    0.243365] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.243666] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[    0.243673] PCI: not using MMCONFIG
[    0.243673] PCI: Using configuration type 1 for base access
[    0.244390] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.244390] ACPI: Disabled all _OSI OS vendors
[    0.244390] ACPI: Added _OSI(Module Device)
[    0.244390] ACPI: Added _OSI(Processor Device)
[    0.244390] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.244390] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244390] ACPI: Added _OSI(Darwin)
[    0.244390] ACPI: EC: EC started
[    0.244390] ACPI: EC: interrupt blocked
[    0.247788] ACPI: \: Used as first EC
[    0.247790] ACPI: \: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.247792] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.249927] ACPI: BIOS _OSI(Darwin) query honored via DMI
[    0.251604] ACPI: Dynamic OEM Table Load:
[    0.251614] ACPI: SSDT 0xFFFF991868A5F200 0001FB (v01 APPLE  Cpu0Ist  00003000 INTL 20061109)
[    0.251841] ACPI: Dynamic OEM Table Load:
[    0.251850] ACPI: SSDT 0xFFFF991868A3A800 0005A6 (v01 APPLE  Cpu0Cst  00003001 INTL 20061109)
[    0.252293] ACPI: Dynamic OEM Table Load:
[    0.252301] ACPI: SSDT 0xFFFF991868A0F900 0000C8 (v01 APPLE  Cpu1Ist  00003000 INTL 20061109)
[    0.252460] ACPI: Dynamic OEM Table Load:
[    0.252467] ACPI: SSDT 0xFFFF9918689ECCC0 000085 (v01 APPLE  Cpu1Cst  00003000 INTL 20061109)
[    0.252774] ACPI: Interpreter enabled
[    0.252796] ACPI: (supports S0 S3 S4 S5)
[    0.252798] ACPI: Using IOAPIC for interrupt routing
[    0.252825] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[    0.253153] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[    0.253164] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.265168] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.265174] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[    0.265185] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[    0.265468] PCI host bridge to bus 0000:00
[    0.265471] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.265473] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.265475] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.265477] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.265479] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.265480] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.265482] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.265484] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.265486] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.265488] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.265489] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.265491] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.265493] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.265495] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.265497] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.265499] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.265501] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.265503] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.265521] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[    0.265742] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[    0.265976] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[    0.266198] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[    0.266423] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[    0.266644] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[    0.266872] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[    0.267092] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[    0.267311] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[    0.267324] pci 0000:00:03.0: reg 0x10: [io  0x2100-0x21ff]
[    0.267455] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[    0.267610] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[    0.267626] pci 0000:00:03.2: reg 0x10: [io  0x2000-0x20ff]
[    0.267633] pci 0000:00:03.2: reg 0x14: [mem 0x93286000-0x93287fff]
[    0.267650] pci 0000:00:03.2: reg 0x20: [io  0x2240-0x227f]
[    0.267657] pci 0000:00:03.2: reg 0x24: [io  0x2200-0x223f]
[    0.267694] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.267806] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[    0.268061] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[    0.268093] pci 0000:00:03.4: reg 0x10: [mem 0x93200000-0x9327ffff]
[    0.268320] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[    0.268335] pci 0000:00:04.0: reg 0x10: [mem 0x9328a000-0x9328afff]
[    0.268389] pci 0000:00:04.0: supports D1 D2
[    0.268391] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268538] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[    0.268555] pci 0000:00:04.1: reg 0x10: [mem 0x9328b100-0x9328b1ff]
[    0.268615] pci 0000:00:04.1: supports D1 D2
[    0.268616] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268787] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[    0.268802] pci 0000:00:06.0: reg 0x10: [mem 0x93289000-0x93289fff]
[    0.268856] pci 0000:00:06.0: supports D1 D2
[    0.268858] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269001] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[    0.269018] pci 0000:00:06.1: reg 0x10: [mem 0x9328b000-0x9328b0ff]
[    0.269078] pci 0000:00:06.1: supports D1 D2
[    0.269079] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269245] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[    0.269260] pci 0000:00:08.0: reg 0x10: [mem 0x93280000-0x93283fff]
[    0.269313] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.269433] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[    0.269447] pci 0000:00:0a.0: reg 0x10: [io  0x2298-0x229f]
[    0.269453] pci 0000:00:0a.0: reg 0x14: [io  0x22a4-0x22a7]
[    0.269459] pci 0000:00:0a.0: reg 0x18: [io  0x2290-0x2297]
[    0.269465] pci 0000:00:0a.0: reg 0x1c: [io  0x22a0-0x22a3]
[    0.269471] pci 0000:00:0a.0: reg 0x20: [io  0x2280-0x228f]
[    0.269477] pci 0000:00:0a.0: reg 0x24: [mem 0x93284000-0x93285fff]
[    0.269645] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[    0.269659] pci 0000:00:0b.0: reg 0x10: [mem 0x93288000-0x93288fff]
[    0.269839] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[    0.270127] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270272] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[    0.270318] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[    0.270585] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[    0.270617] pci 0000:01:00.0: reg 0x10: [mem 0x93100000-0x93103fff 64bit]
[    0.270740] pci 0000:01:00.0: supports D1 D2
[    0.270742] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.270922] pci 0000:00:15.0: PCI bridge to [bus 01]
[    0.270944] pci 0000:00:15.0:   bridge window [mem 0x93100000-0x931fffff]
[    0.271016] pci 0000:02:00.0: [10de:08a3] type 00 class 0x030000
[    0.271029] pci 0000:02:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[    0.271038] pci 0000:02:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.271046] pci 0000:02:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[    0.271053] pci 0000:02:00.0: reg 0x24: [io  0x1000-0x107f]
[    0.271059] pci 0000:02:00.0: reg 0x30: [mem 0x93000000-0x9301ffff pref]
[    0.271256] pci 0000:00:17.0: PCI bridge to [bus 02]
[    0.271260] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
[    0.271264] pci 0000:00:17.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.271268] pci 0000:00:17.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.271711] ACPI: PCI Interrupt Link [LNK1] (IRQs *16 17 18 19 20 21 22 23)
[    0.271831] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 *17 18 19 20 21 22 23)
[    0.271949] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 *18 19 20 21 22 23)
[    0.272067] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 *19 20 21 22 23)
[    0.272186] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 *21 22 23)
[    0.272305] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 *21 22 23)
[    0.272426] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 *21 22 23)
[    0.272544] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 *21 22 23)
[    0.272661] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 *22 23)
[    0.272778] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 *17 18 19 20 21 22 23)
[    0.272894] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 *17 18 19 20 21 22 23)
[    0.273013] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 *17 18 19 20 21 22 23)
[    0.273135] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 *20 21 22 23)
[    0.273252] ACPI: PCI Interrupt Link [LGPU] (IRQs *16 17 18 19 20 21 22 23)
[    0.273376] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.273496] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 *18 19 20 21 22 23)
[    0.273614] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 *18 19 20 21 22 23)
[    0.273731] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 *22 23)
[    0.273845] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.274049] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.274063] ACPI: Enabled 2 GPEs in block 20 to 5F
[    0.274112] ACPI: EC: EC stopped
[    0.274113] ACPI: EC: EC started
[    0.274114] ACPI: EC: interrupt blocked
[    0.291243] ACPI: EC: interrupt unblocked
[    0.291253] ACPI: EC: event unblocked
[    0.291262] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.291264] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events
[    0.291292] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.291294] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.291384] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.291384] pci 0000:02:00.0: vgaarb: setting as boot device
[    0.291384] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.291384] vgaarb: loaded
[    0.291384] EDAC MC: Ver: 3.0.0
[    0.291384] Registered efivars operations
[    0.771721] PCI: Using ACPI for IRQ routing
[    0.771724] PCI: pci_cache_line_size set to 64 bytes
[    0.771861] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.771862] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[    0.771864] e820: reserve RAM buffer [mem 0x7f719000-0x7fffffff]
[    0.771866] e820: reserve RAM buffer [mem 0x7f954000-0x7fffffff]
[    0.771868] e820: reserve RAM buffer [mem 0x7f96f000-0x7fffffff]
[    0.771869] e820: reserve RAM buffer [mem 0x7f9b0000-0x7fffffff]
[    0.771871] e820: reserve RAM buffer [mem 0x7fef9000-0x7fffffff]
[    0.771993] NetLabel: Initializing
[    0.771994] NetLabel:  domain hash size = 128
[    0.771995] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.772018] NetLabel:  unlabeled traffic allowed by default
[    0.772069] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.772075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.772081] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.776687] clocksource: Switched to clocksource hpet
[    0.793093] VFS: Disk quotas dquot_6.6.0
[    0.793121] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.793239] pnp: PnP ACPI init
[    0.793417] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.793422] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.793594] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.793599] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.793746] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.793748] system 00:02: [io  0x0480-0x04ff] has been reserved
[    0.793751] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.793753] system 00:02: [io  0x0580-0x05ff] has been reserved
[    0.793755] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.793757] system 00:02: [io  0x0880-0x08ff] has been reserved
[    0.793760] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.793762] system 00:02: [io  0x0295-0x0296] has been reserved
[    0.793766] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.793802] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.794249] pnp: PnP ACPI: found 4 devices
[    0.801554] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.801595] pci 0000:00:15.0: PCI bridge to [bus 01]
[    0.801608] pci 0000:00:15.0:   bridge window [mem 0x93100000-0x931fffff]
[    0.801629] pci 0000:00:17.0: PCI bridge to [bus 02]
[    0.801631] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
[    0.801635] pci 0000:00:17.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.801638] pci 0000:00:17.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.801643] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.801646] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.801648] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.801649] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.801651] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.801653] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.801655] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.801657] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.801659] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.801661] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.801663] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.801665] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.801667] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.801669] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.801671] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.801673] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.801674] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[    0.801677] pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
[    0.801679] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.801681] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[    0.801683] pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[    0.801797] NET: Registered protocol family 2
[    0.802017] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.802086] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.802194] TCP: Hash tables configured (established 16384 bind 16384)
[    0.802256] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.802274] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.802333] NET: Registered protocol family 1
[    0.802721] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[    0.857062] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[    0.857452] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 20
[    0.913720] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 19
[    0.913945] PCI: CLS 256 bytes, default 64
[    0.913994] Unpacking initramfs...
[    1.059907] Freeing initrd memory: 6524K
[    1.060140] Scanning for low memory corruption every 60 seconds
[    1.060908] Initialise system trusted keyrings
[    1.060921] Key type blacklist registered
[    1.061008] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.062967] zbud: loaded
[    1.064812] Key type asymmetric registered
[    1.064857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.064898] io scheduler noop registered
[    1.064900] io scheduler deadline registered
[    1.064941] io scheduler cfq registered (default)
[    1.064942] io scheduler mq-deadline registered
[    1.064943] io scheduler kyber registered
[    1.064982] io scheduler bfq registered
[    1.065426] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
[    1.065631] efifb: probing for efifb
[    1.065658] efifb: framebuffer at 0x80010000, using 7232k, total 7232k
[    1.065659] efifb: mode is 1440x900x32, linelength=8192, pages=1
[    1.065660] efifb: scrolling: redraw
[    1.065662] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.070890] Console: switching to colour frame buffer device 180x56
[    1.075929] fb0: EFI VGA frame buffer device
[    1.075940] intel_idle: does not run on family 6 model 23
[    1.076040] Monitor-Mwait will be used to enter C-1 state
[    1.076045] Monitor-Mwait will be used to enter C-2 state
[    1.076050] Monitor-Mwait will be used to enter C-3 state
[    1.076052] tsc: Marking TSC unstable due to TSC halts in idle
[    1.076409] GHES: HEST is not enabled!
[    1.076526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.077472] rtc_cmos 00:03: RTC can wake from S4
[    1.077786] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.077840] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.077906] ledtrig-cpu: registered to indicate activity on CPUs
[    1.077954] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.078270] NET: Registered protocol family 10
[    1.082790] Segment Routing with IPv6
[    1.082812] NET: Registered protocol family 17
[    1.082951] RAS: Correctable Errors collector initialized.
[    1.082986] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[    1.083048] microcode: Microcode Update Driver: v2.2.
[    1.083231] registered taskstats version 1
[    1.083244] Loading compiled-in X.509 certificates
[    1.083259] zswap: loaded using pool lzo/zbud
[    1.087010] Key type big_key registered
[    1.087668]   Magic number: 9:726:621
[    1.087815] rtc_cmos 00:03: setting system clock to 2017-11-05 07:37:05 UTC (1509867425)
[    1.088721] PM: Hibernation image not present or could not be loaded.
[    1.091246] Freeing unused kernel memory: 1336K
[    1.091248] Write protecting the kernel read-only data: 10240k
[    1.092198] Freeing unused kernel memory: 1536K
[    2.080024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x359355a40ea, max_idle_ns: 881590542641 ns
[    2.111256] ACPI: bus type USB registered
[    2.111290] usbcore: registered new interface driver usbfs
[    2.111303] usbcore: registered new interface driver hub
[    2.111333] usbcore: registered new device driver usb
[    2.111965] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.112505] ehci-pci: EHCI PCI platform driver
[    2.112631] SCSI subsystem initialized
[    2.112758] ehci-pci 0000:00:04.1: EHCI Host Controller
[    2.112767] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    2.112779] ehci-pci 0000:00:04.1: debug port 1
[    2.112803] ehci-pci 0000:00:04.1: disable ppcd for nvidia mcp89
[    2.112810] ehci-pci 0000:00:04.1: cache line size of 256 is not supported
[    2.112829] ehci-pci 0000:00:04.1: irq 23, io mem 0x9328b100
[    2.113406] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.114826] libata version 3.00 loaded.
[    2.123390] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.10
[    2.123607] hub 1-0:1.0: USB hub found
[    2.123616] hub 1-0:1.0: 6 ports detected
[    2.124096] ehci-pci 0000:00:06.1: EHCI Host Controller
[    2.124105] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    2.124114] ehci-pci 0000:00:06.1: debug port 1
[    2.124134] ehci-pci 0000:00:06.1: disable ppcd for nvidia mcp89
[    2.124140] ehci-pci 0000:00:06.1: cache line size of 256 is not supported
[    2.124153] ehci-pci 0000:00:06.1: irq 19, io mem 0x9328b000
[    2.136748] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.10
[    2.136992] hub 2-0:1.0: USB hub found
[    2.137001] hub 2-0:1.0: 6 ports detected
[    2.137353] ahci 0000:00:0a.0: version 3.0
[    2.137639] ohci-pci: OHCI PCI platform driver
[    2.137667] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[    2.137745] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    2.137748] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst 
[    2.138296] scsi host0: ahci
[    2.138381] ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 24
[    2.138537] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    2.138544] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[    2.138562] ohci-pci 0000:00:04.0: irq 23, io mem 0x9328a000
[    2.195676] hub 3-0:1.0: USB hub found
[    2.195686] hub 3-0:1.0: 6 ports detected
[    2.196113] ohci-pci 0000:00:06.0: OHCI PCI host controller
[    2.196119] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[    2.196141] ohci-pci 0000:00:06.0: irq 20, io mem 0x93289000
[    2.252234] hub 4-0:1.0: USB hub found
[    2.252244] hub 4-0:1.0: 6 ports detected
[    2.451025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.451264] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.451327] ata1.00: ATA-8: APPLE SSD TS128C, CJAA0201, max UDMA/100
[    2.451330] ata1.00: 236978176 sectors, multi 16: LBA48 
[    2.451638] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.451702] ata1.00: configured for UDMA/100
[    2.451946] scsi 0:0:0:0: Direct-Access     ATA      APPLE SSD TS128C 0201 PQ: 0 ANSI: 5
[    2.460118] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.488441] sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
[    2.488458] sd 0:0:0:0: [sda] Write Protect is off
[    2.488461] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.488488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.490543]  sda: sda1 sda2 sda3 sda4 sda5
[    2.491269] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.604477] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.605344] scsi host1: usb-storage 2-1:1.0
[    2.605437] usbcore: registered new interface driver usb-storage
[    2.605811] usbcore: registered new interface driver uas
[    2.627685] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.746702] usb 3-3: new full-speed USB device number 2 using ohci-pci
[    2.751887] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.760897] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    2.761042] systemd[1]: Detected architecture x86-64.
[    2.761702] systemd[1]: Set hostname to <arche>.
[    2.879934] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.880178] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.880454] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.881170] systemd[1]: Created slice User and Session Slice.
[    2.881489] systemd[1]: Created slice System Slice.
[    2.886034] systemd[1]: Listening on udev Kernel Socket.
[    2.886158] systemd[1]: Reached target Slices.
[    2.959082] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    3.032156] systemd-journald[184]: Received request to flush runtime journal from PID 1
[    3.134637] ACPI: SBS HC: EC = 0xffff991868a0f500, offset = 0x20, query_bit = 0x10
[    3.135001] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    3.135047] ACPI: Lid Switch [LID0]
[    3.135105] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    3.135118] ACPI: Power Button [PWRB]
[    3.135172] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    3.135183] ACPI: Sleep Button [SLPB]
[    3.135263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.135283] ACPI: Power Button [PWRF]
[    3.135407] hidraw: raw HID events driver (C) Jiri Kosina
[    3.143647] ACPI: AC Adapter [ADP1] (off-line)
[    3.169463] usbcore: registered new interface driver usbhid
[    3.169466] usbhid: USB HID core driver
[    3.172532] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[    3.172561] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    3.172707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input4
[    3.197497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.200803] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    3.250234] bcma: bus0: Found chip with id 43224, rev 0x01 and package 0x08
[    3.250251] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    3.250263] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    3.250285] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    3.272319] Linux agpgart interface v0.103
[    3.290191] snd_hda_intel 0000:00:08.0: enabling device (0000 -> 0002)
[    3.290518] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[    3.290528] snd_hda_intel 0000:00:08.0: Disabling MSI
[    3.290531] snd_hda_intel 0000:00:08.0: position_fix set to 1 for device 10de:cb89
[    3.310570] bcma: bus0: Bus registered
[    3.375333] applesmc: key=323 fan=1 temp=27 index=26 acc=0 lux=0 kbd=0
[    3.375430] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.388763] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.388799] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[    3.395325] intel_powerclamp: No package C-state available
[    3.405784] Adding 4198396k swap on /dev/sda4.  Priority:-1 extents:1 across:4198396k SSFS
[    3.417558] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6
[    3.417585] usbcore: registered new interface driver bcm5974
[    3.445113] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/0003:05AC:0240.0001/input/input7
[    3.445957] ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    3.446060] ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
[    3.446103] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[    3.446324] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[    3.446418] checking generic (80010000 710000) vs hw (80000000 10000000)
[    3.446419] fb: switching to nouveaufb from EFI VGA
[    3.446451] Console: switching to colour dummy device 80x25
[    3.446689] nouveau 0000:02:00.0: NVIDIA MCP89 (0af180a2)
[    3.477821] nouveau 0000:02:00.0: bios: version 70.89.13.00.00
[    3.500128] apple 0003:05AC:0240.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[    3.500305] apple 0003:05AC:0240.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[    3.503868] nouveau 0000:02:00.0: fb: 256 MiB stolen system memory
[    3.590232] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[    3.672467] scsi 1:0:0:0: Direct-Access     APPLE    SD Card Reader   1.00 PQ: 0 ANSI: 0
[    3.674189] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    3.675740] mousedev: PS/2 mouse device common for all mice
[    3.726706] usb 3-5: new full-speed USB device number 3 using ohci-pci
[    3.868434] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    3.868452] b43: probe of bcma0:1 failed with error -524
[    3.877968] Broadcom 43xx driver loaded [ Features: PNLS ]
[    3.912383] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 22
[    3.933294] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.936735] brcmsmac bcma0:1 wlp1s0b1: renamed from wlan0
[    3.959119] hub 3-5:1.0: USB hub found
[    3.962066] hub 3-5:1.0: 3 ports detected
[    4.213345] usb 1-6: new high-speed USB device number 4 using ehci-pci
[    4.276710] usb 3-5.1: new full-speed USB device number 4 using ohci-pci
[    4.405459] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:05AC:820A.0003/input/input8
[    4.460756] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[    4.483390] usb 3-5.2: new full-speed USB device number 5 using ohci-pci
[    4.493389] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[    4.493392] snd_hda_codec_cirrus hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.493394] snd_hda_codec_cirrus hdaudioC0D0:    hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[    4.493396] snd_hda_codec_cirrus hdaudioC0D0:    mono: mono_out=0x0
[    4.493398] snd_hda_codec_cirrus hdaudioC0D0:    dig-out=0x10/0x0
[    4.493400] snd_hda_codec_cirrus hdaudioC0D0:    inputs:
[    4.493402] snd_hda_codec_cirrus hdaudioC0D0:      Mic=0xd
[    4.610545] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0004/input/input9
[    4.636740] media: Linux media interface: v0.10
[    4.644421] Linux video capture interface: v2.00
[    4.655333] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
[    4.662904] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[    4.662907] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.663182] input: Built-in iSight: Built-in iSigh as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
[    4.666837] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[    4.670369] usbcore: registered new interface driver uvcvideo
[    4.670371] USB Video Class driver (1.1.1)
[    4.746708] usb 3-5.3: new full-speed USB device number 6 using ohci-pci
[    4.780286] [TTM] Zone  kernel: Available graphics memory: 894452 kiB
[    4.780288] [TTM] Initializing pool allocator
[    4.780294] [TTM] Initializing DMA pool allocator
[    4.780319] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
[    4.780321] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[    4.780326] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[    4.780328] nouveau 0000:02:00.0: DRM: DCB version 4.0
[    4.780331] nouveau 0000:02:00.0: DRM: DCB outp 00: 040001b6 0f220010
[    4.780333] nouveau 0000:02:00.0: DRM: DCB outp 01: 020112a6 0f220010
[    4.780335] nouveau 0000:02:00.0: DRM: DCB outp 02: 02011262 00020010
[    4.780337] nouveau 0000:02:00.0: DRM: DCB conn 00: 00002047
[    4.780339] nouveau 0000:02:00.0: DRM: DCB conn 01: 00101146
[    4.785966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.785967] [drm] Driver supports precise vblank timestamp query.
[    4.801719] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[    4.870637] nouveau 0000:02:00.0: DRM: allocated 1440x900 fb: 0x50000, bo ffff9918654c4000
[    4.874697] fbcon: nouveaufb (fb0) is primary device
[    4.927373] Bluetooth: Core ver 2.22
[    4.927678] NET: Registered protocol family 31
[    4.927679] Bluetooth: HCI device and connection manager initialized
[    4.927684] Bluetooth: HCI socket layer initialized
[    4.927687] Bluetooth: L2CAP socket layer initialized
[    4.927694] Bluetooth: SCO socket layer initialized
[    4.941337] usbcore: registered new interface driver btusb
[    4.966087] usb 3-5.1: USB disconnect, device number 4
[    5.000110] Console: switching to colour frame buffer device 180x56
[    5.069098] Bluetooth: hci0: BCM: chip id 19 build 0848
[    5.072096] Bluetooth: hci0: BCM: product 05ac:821b
[    5.075095] Bluetooth: hci0: BCM: features 0x07
[    5.093076] Bluetooth: hci0: ubuntu-0
[    5.102601] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    5.110100] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    5.190238] usb 3-5.2: USB disconnect, device number 5
[    5.595331] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[    5.595788] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[    5.596205] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input13
[    5.596600] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input14
[   12.864219] random: crng init done

What do I have to do to fix the problem?

If I have to add any log-files, please tell me.

Thank you for your help.

EDIT2: removed error messages which are not depending of the broadcom-driver.

Last edited by oeht (2017-11-06 16:40:26)

Offline

#2 2017-11-04 21:11:32

seth
Member
Registered: 2012-09-03
Posts: 49,967

Re: [SOLVED] Broadcom-driver error (b43)

Did wifi work before?
In case, just blacklist the wl module to return to the b43 or brcmsmac module (which ever was actually used)

The output of dmesg (from arch, not ubuntu!) would be a good start for further inspection of the situation.

Offline

#3 2017-11-04 21:14:16

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,442
Website

Re: [SOLVED] Broadcom-driver error (b43)

I'd second all of the above: if b43 was functional, stick with that.  Broadcom-wl is really a near-last-resort.

I'm not familiar with those messages, but there is a history of broadcom drivers being fairly verbose and emitting harmless warnings.

All in all, if b43 ain't broke, don't try to fix it with wl.

EDIT: the "solution" you linked to was for someone with hardware that was not supported by b43 or - presumably - any other better option, so wl was all that was left.  It sounds like your hardware is supported by b43.  If in doubt, please post the output of `lspci -vnn | grep -i net`

Last edited by Trilby (2017-11-04 21:16:23)


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#4 2017-11-04 21:27:47

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: [SOLVED] Broadcom-driver error (b43)

seth wrote:

In case, just blacklist the wl module to return to the b43 or brcmsmac module (which ever was actually used)

broadcom-wl-dkms blacklists b43 and brcmsmac see broadcom-wl-dkms.conf would not adding wl to the blacklist just make no drivers available?

Offline

#5 2017-11-04 21:34:50

seth
Member
Registered: 2012-09-03
Posts: 49,967

Re: [SOLVED] Broadcom-driver error (b43)

You're (of course) right, I wasn't aware that it blocks them completely.

So to mend my suggestion:
"blacklist wl and unblacklist b43 and brcmsmac" (move away the blacklist config provided by wl - or just uninstall broadcom-wl-dkms)

Offline

#6 2017-11-05 10:15:57

oeht
Member
Registered: 2017-11-04
Posts: 20

Re: [SOLVED] Broadcom-driver error (b43)

Thank you for your help!

I posted the originally dmesg in the originally post. I found out, that

(...) Wrong diagnostic page: asked for 1 got 8
(...) Failed to get diagnostic page 0xffffffea
(...) Failed to bind enclosure -19

is problem caused by a detective external HD, which I can solve sperately.

Yes, the wifi worked before, so I uninstalled broadcom-wl-dkms and it works again.

Furthermore I created /etc/modprobe.d/blacklist.conf with the content

blacklist wl

but the error still occurs in dmesg.

Here is the output of 'lspci -vnn | grep -i net'

01:00.0 Network controller [0280]: Broadcom Limited BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)

Offline

#7 2017-11-05 10:42:33

seth
Member
Registered: 2012-09-03
Posts: 49,967

Re: [SOLVED] Broadcom-driver error (b43)

[    3.868434] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    3.868452] b43: probe of bcma0:1 failed with error -524
[    3.877968] Broadcom 43xx driver loaded [ Features: PNLS ]
[    3.912383] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 22
[    3.936735] brcmsmac bcma0:1 wlp1s0b1: renamed from wlan0

So, what do you think happens and what other options do you have?

Offline

#8 2017-11-05 12:48:05

oeht
Member
Registered: 2017-11-04
Posts: 20

Re: [SOLVED] Broadcom-driver error (b43)

As listed in https://wireless.wiki.kernel.org/en/use … f_hardware my device seems to be supported by b43.

I've tried this answer , but it does end in some more errors (dmesg | grep b43):

[    2.896617] b43-phy0: Broadcom 43224 WLAN found (core revision 23)
[    2.897153] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
[    2.897163] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 11, Version 0
[    2.903129] b43 bcma0:1: Direct firmware load for b43/ucode16_mimo.fw failed with error -2
[    2.903145] b43 bcma0:1: Direct firmware load for b43/ucode16_mimo.fw failed with error -2
[    2.903164] b43 bcma0:1: Direct firmware load for b43-open/ucode16_mimo.fw failed with error -2
[    2.903177] b43 bcma0:1: Direct firmware load for b43-open/ucode16_mimo.fw failed with error -2
[    2.903179] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
[    2.903188] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
[    2.903198] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.

so how can I check, if I've installed the firmware the right way or how can I install it now?

Offline

#9 2017-11-05 12:59:26

seth
Member
Registered: 2012-09-03
Posts: 49,967

Offline

#10 2017-11-06 16:38:24

oeht
Member
Registered: 2017-11-04
Posts: 20

Re: [SOLVED] Broadcom-driver error (b43)

Thank you, seth. This was the solution.

To sum up for other people, the solution was the following:

1) Install b43-firmware. See this entry in the wiki for how to do this.

2) Create /etc/modprobe.d/local-b43.conf with

 # Activate experimental support for some hardware revisions
options b43 allhwsupport=1

Now I'm looking forward to finish my installation and getting a part of the arch community!

Last edited by oeht (2017-11-06 20:03:12)

Offline

#11 2017-11-06 17:13:53

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [SOLVED] Broadcom-driver error (b43)

@oeht

You may want to edit the typo in your post, the directory is /etc/modprobe.d/ not /etc/modeprobe.d/.


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#12 2017-11-06 20:04:56

oeht
Member
Registered: 2017-11-04
Posts: 20

Re: [SOLVED] Broadcom-driver error (b43)

slithery wrote:

@oeht

You may want to edit the typo in your post, the directory is /etc/modprobe.d/ not /etc/modeprobe.d/.

Thank you for reading it exactly! It's corrected.

Offline

Board footer

Powered by FluxBB