You are not logged in.
After upgrading my system, I can't run 'startx' successfully anymore. It failes to load my fgrlx module.
modprobe fglrx gives me this:
Module fglrx not found in directory /lib/modules/4.11.9-1-ARCH
I got catalyst-hook installed. I am still no expert in archlinux so I would love to get your help to fix this. Thanks.
Last edited by xunil36 (2017-11-05 14:43:03)
Offline
Did you get a kernel upgrade in the update? Did you reboot after the kernel upgrade?
Offline
Sounds like your boot partition wasn't mounted when you updated or your bootloader config is screwed up.
Offline
@2ManyDogs Can I check it afterwards to be sure?
@Scimmia The boot partition should've been mounted when updating. 'startx' gives me this (see image)
http://www.bilder-upload.eu/upload/62c5 … 894281.jpg
Mod note: Please read the Code of Conduct and only post thumbnails. -- WorMzy
Last edited by WorMzy (2017-11-05 15:57:58)
Offline
Should have been mounted, but why, then, are you running an old kernel?
Offline
Moving to NC...
Offline
@Scimia, yes I am running an old kernel because I got trouble because the amd-drivers aren't working with the newer kernel. So I just used the older kernel until I will buy a new graphic card nevertheless.
Offline
So the problem is that you simply don't have the module for that kernel. No idea what catalyst-hook is.
Offline
Yes but I got no idea why it is missing and how I can get it.
Offline
Start out with where the module is supposed to come from
Offline
I thought that it would come from AMD Catalyst. That's why I even reinstalled catalyst-hook, but sadly it didn't work out.
Offline
And what does that package do?
Follow this through, I'm not going to lead you by the nose forever.
Offline
What graphics card exactly do you have? Why do you use catalyst/fglrx instead on radeon&mesa?
Offline
I reinstalled the packages and when installing catalyst it says that the building of fglrx module is failing.
It says in the error-log:
Warning:
kernel includes at/usr/lib/modules/4.11.9-1-ARCH/build/include not found or incomplete
file: /usr/lib/modules/4.11.9-1-ARCH/build/include/linux/autoconf.h
assuming default: MODVERSIONS=0
Warning:
kernel includes at/usr/lib/modules/4.11.9-1-ARCH/build/include not found or incomplete
file: /usr/lib/modules/4.11.9-1-ARCH/build/arch/x86/include/asm/compat.h
md5sum: /usr/lib/modules/4.11.9-1-ARCH/build/Module.symvers: No such file or directory
make: Entering directory '/usr/lib/modules/4.11.9-1-ARCH/build'
make: *** No rule to make target 'modules'. Stop.
make: Leaving directory '/usr/lib/modules/4.11.9-1-ARCH/build'Offline
What version of the linux-headers package?
Offline
4.13.11-1 is installed.
Is that the problem? Do I need to downgrade to 4.11?
Last edited by xunil36 (2017-11-05 16:23:33)
Offline
Yep, headers need to match the kernel
Offline
Thank you! Is there a possibility to get the older version, so to downgrade when I don't have it in my pacman cache?
Offline
Offline
Thank you very very much! It is working again. ![]()
Offline
Please remember to mark your topic as solved.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Online