You are not logged in.
Pages: 1
Hi, I run into trouble with a creative webcam that use to work.
It uses ov511 module which isn't loaded automatically :shock:
I have added this module in rc.conf but the webcam still doesn't work.
I also have xf86-video-v4l and " Load "v4l" " in my xorg.conf
The log for X :
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.8
When pluging / unpluging the webcam here's dmesg output :
usb 1-1.1: new low speed USB device using uhci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new low speed USB device using uhci_hcd and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.3: new full speed USB device using uhci_hcd and address 5
usb 1-1.3: no configuration chosen from 1 choice
And in /dev I don't have any /dev/videoX device nor /dev/v4l directory :
adsp dmmidi floppy legacy mem ram10 ram7 stdin tty15 tty25 tty35 tty45 tty55 tty8
agpgart dsp full log midi ram11 ram8 stdout tty16 tty26 tty36 tty46 tty56 tty9
apm_bios fb hda loop misc ram12 ram9 tts tty17 tty27 tty37 tty47 tty57 ttyS0
audio fb0 hda1 loop0 mixer ram13 random tty tty18 tty28 tty38 tty48 tty58 ttyS1
bus fbsplash hda2 loop1 null ram14 rd tty0 tty19 tty29 tty39 tty49 tty59 ttyS2
cd fd hda3 loop2 port ram15 sequencer tty1 tty2 tty3 tty4 tty5 tty6 ttyS3
cdrom fd0 hdc loop3 psaux ram2 sequencer2 tty10 tty20 tty30 tty40 tty50 tty60 urandom
cdrom0 fd0h1200 initctl loop4 ptmx ram3 shm tty11 tty21 tty31 tty41 tty51 tty61 vc
console fd0u1440 input loop5 pts ram4 snd tty12 tty22 tty32 tty42 tty52 tty62 vcc
core fd0u360 kmem loop6 ram0 ram5 sound tty13 tty23 tty33 tty43 tty53 tty63 zero
disk fd0u720 kmsg loop7 ram1 ram6 stderr tty14 tty24 tty34 tty44 tty54 tty7
So no /dev/video, /dev/vidoX, /dev/v4l !!!
Output from hwd -e :
IDE interface
ata_piix : Intel Corp.|82371AB PIIX4 IDE
Ethernet controller
xircom_cb : Xircom|Cardbus Ethernet 10/100
VGA compatible controller
vesa : ATI Technologies Inc.|3D Rage LT Pro AGP-133
Multimedia audio controller
snd-cs46xx : Cirrus Logic|CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
Host bridge
intel-agp : Intel Corp.|440BX/ZX - 82443BX/ZX Host bridge
ISA bridge
unknown : Intel Corp.|82371AB PIIX4 ISA
PCI bridge
agpgart : Intel Corp.|440BX/ZX - 82443BX/ZX AGP bridge
CardBus bridge
yenta_socket : O2Micro Inc.|6872
Bridge
sonypi : Intel Corp.|82371AB PIIX4 ACPI - Bus Master IDE Controller
Communication controller
unknown : Pctel Inc.|HSP MicroModem 56
USB Controller
uhci_hcd : Intel Corp.|82371AB PIIX4 USB
USB Human Interface Devices
usbhid : Logitech Inc.|Mouse [/dev/input/mice]
usbhid : Microsoft Corp.|Internet Keyboard Pro
USB Hub
hub :
hub : Virtual|Hub
USB Vendor Specific Class
ov511 : OmniVision Technologies, Inc.|OV511+ WebCam
Mouse
msintellips/2 : PS/2 Mouse port [/dev/psaux]
Finaly lsmod :
Module Size Used by
snd_seq_oss 26084 0
snd_seq_midi_event 6400 1 snd_seq_oss
snd_seq 42060 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 31904 0
snd_mixer_oss 14080 1 snd_pcm_oss
snd_cs46xx 71496 0
gameport 11144 2 snd_cs46xx
snd_rawmidi 17824 1 snd_cs46xx
snd_seq_device 6540 3 snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec 79904 1 snd_cs46xx
snd_ac97_bus 2688 1 snd_ac97_codec
snd_pcm 64900 3 snd_pcm_oss,snd_cs46xx,snd_ac97_codec
snd_timer 17284 2 snd_seq,snd_pcm
snd 39776 10 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7520 1 snd
snd_page_alloc 7688 2 snd_cs46xx,snd_pcm
usbhid 39296 0
i2c_piix4 7952 0
i2c_core 16256 1 i2c_piix4
xircom_cb 8448 0
pcmcia 28460 0
shpchp 35936 0
pci_hotplug 22340 1 shpchp
uhci_hcd 25488 0
intel_agp 18588 1
agpgart 23884 1 intel_agp
yenta_socket 20876 2
rsrc_nonstatic 10368 1 yenta_socket
pcmcia_core 31896 3 pcmcia,yenta_socket,rsrc_nonstatic
joydev 8000 0
evdev 7552 3
ov511 62740 0
usbcore 97696 4 usbhid,uhci_hcd,ov511
compat_ioctl32 1920 1 ov511
videodev 7552 1 ov511
xfs 430748 0
reiserfs 207472 2
jfs 150524 0
ext3 105096 0
jbd 47636 1 ext3
reiser4 330456 0
ide_floppy 13952 0
ide_cd 32032 1
cdrom 30128 1 ide_cd
ide_disk 14596 4
via82cxxx 7940 0 [permanent]
trm290 4228 0 [permanent]
triflex 3712 0 [permanent]
slc90e66 4992 0 [permanent]
sis5513 11404 0 [permanent]
siimage 9856 0 [permanent]
serverworks 7560 0 [permanent]
sc1200 6144 0 [permanent]
rz1000 3072 0 [permanent]
piix 8708 0 [permanent]
pdc202xx_old 8832 0 [permanent]
pdc202xx_new 7424 0 [permanent]
ns87415 4140 0 [permanent]
it821x 7172 0 [permanent]
hpt366 15488 0 [permanent]
hpt34x 4608 0 [permanent]
generic 4740 0 [permanent]
cy82c693 4228 0 [permanent]
cs5535 4096 0 [permanent]
cs5530 4736 0 [permanent]
cmd64x 9244 0 [permanent]
atiixp 5264 0 [permanent]
amd74xx 12828 0 [permanent]
alim15x3 9872 0 [permanent]
aec62xx 6400 0 [permanent]
ide_core 101196 28 ide_floppy,ide_cd,ide_disk,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,cmd64x,atiixp,amd74xx,alim15x3,aec62xx
Same problem with kernel26beyond and kernel26-2.6.17.
The computer is uptodate on current branch.
I've also tryed and install ekiga / xawtv but all block on the missing /dev/video
What pkg I forgot to install ?
Thx for reply
-=<>=-
Archlinux French site : http://www.archlinux.fr
Offline
Hi Warnaud!
I had the same problem yesterday and also got frustrated that somehow nothing would help.... (http://bbs.archlinux.org/viewtopic.php?t=22832)
Maybe this might also help in your case...
run abs as root,
then makepgk in /var/abs/kernels/kernel26
and finally pacman -U with the new created kernel package
if you use nvidia you have to run an additional pacman -S nvidia after that
(or after reboot into shell)
I dont think that you really have to load v4l in xorg.... (however this was also one of the things I tried...).
Do you have hotplug loaded? Cause my pwc module was loaded automatically but the /dev/video was missing...
I hope this could help!
Best regards
Offline
I solved this in another way, I bought a powered USB hub and everything's working now :shock: Really weird issue ... and I don't see how the kernel or another pkg can influence the power in the USB chain ...
-=<>=-
Archlinux French site : http://www.archlinux.fr
Offline
Pages: 1