You are not logged in.
I'm using Pulseaudio with my speaker system most of the time (Two speakers and a subwoofer). It works really nice, sound is fine, everything works as expected.
If I plug in my headphones into the front of my PC, Pulseaudio recognizes that and in Pavucontrol, I see 'Line Out' change to 'Line Out (unplugged)' and 'Headphones (plugged in)' appearing. There is actually sound coming from my headphones, but it's HORRIBLE.
It's incredibly distorted. For example, I tried watching this video: https://www.youtube.com/watch?v=okpg-lVWLbE and all I can hear is the background music: the speech is completely inaudible, I just hear it as a noise. The same happens when I try opening a film locally on my PC: if there's any background music, the speech is just not audible. If there's only speech, it's still very weird and distorted, as if people were talking from underwater.
I have also noticed, that if I try 'speaker-test -t waw -c 2', both 'front left' and 'front right' are audible on both sides of my headphone (I assume that means it's playing in mono?)
I have already checked the Wiki about Pulseaudio troubleshooting, but none of the fixes worked. I have done research on the internet, but nothing changed anything.
bertalanp99@watermelon > aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
This is my 'asound.conf'
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
}
}
ctl.!default {
type pulse
fallback "sysdefault"
}
# vim:set ft=alsaconf:
pcm.!default {
type plug
slave.pcm hv
}
Any help would be greatly appreciated!
Offline
I have the same problem with my headphones, but it does not happen always. Just a guess, do you use Firefox?
After rebooting the system and using Chromium for playback on Youtube, the sound works fine.
Offline
Post
sudo fuser -v /dev/snd/*
pacmd list-sinks
pacmd list-sink-inputs
journalctl -f --user-unit pulseaudio #Start this before reproducing the issue and post any output that appears, if any
While reproducing the issue.
Offline