You are not logged in.
Hi guys, I have a problemi with my arch installation. Today I give up to DIY installation of my printer Samsung ML-1660 on Arch. With Debian and Ubuntu, my previous OS, I hadn't any problems, just plug-and-play. With Arch, it seems that everithing is not simple XD. So, after two weeks between forums and google I ask for help. I had tried to instal samsung-universal-driver, to blacklist usblp, to instal different version of cups, nothing. In Settings > Devices > Printers I can view that my system can see the printer but when I try to add it I get an error "Unable to add a printer" (with gnome shell). I will show you some output, maybe you will be able to help me
[otacon@otaDesk]: ~>$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 005: ID 04e8:3301 Samsung Electronics Co., Ltd ML-1660 Series[otacon@otaDesk]: ~>$ systemctl status org.cups.cupsd.service
● org.cups.cupsd.service - CUPS Scheduler
Loaded: loaded (/usr/lib/systemd/system/org.cups.cupsd.service; enabled; vendor preset: disabled)
Active: active (running) since Sat 2017-12-02 13:29:38 CET; 29min ago
Docs: man:cupsd(8)
Main PID: 844 (cupsd)
Status: "Scheduler is running..."
Tasks: 1 (limit: 4915)
CGroup: /system.slice/org.cups.cupsd.service
└─844 /usr/bin/cupsd -l
dic 02 13:29:37 otaDesk systemd[1]: Starting CUPS Scheduler...
dic 02 13:29:38 otaDesk systemd[1]: Started CUPS Scheduler.
[otacon@otaDesk]: ~>$ systemctl status org.cups.cupsd.socket
● org.cups.cupsd.socket - CUPS Scheduler
Loaded: loaded (/usr/lib/systemd/system/org.cups.cupsd.socket; enabled; vendor preset: disabled)
Active: active (running) since Sat 2017-12-02 13:29:37 CET; 29min ago
Listen: /run/cups/cups.sock (Stream)
Tasks: 0 (limit: 4915)
CGroup: /system.slice/org.cups.cupsd.socket
dic 02 13:29:37 otaDesk systemd[1]: Listening on CUPS Scheduler.[otacon@otaDesk]: ~>$ dmesg | tail -n 20
[ 5.791460] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 5.803947] nouveau 0000:05:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff9b6d24e4a800
[ 5.804629] fbcon: nouveaufb (fb0) is primary device
[ 5.974964] Console: switching to colour frame buffer device 210x65
[ 6.060450] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input19
[ 6.060513] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input20
[ 6.060573] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input21
[ 6.060626] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input22
[ 6.111804] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[ 6.130041] [drm] Initialized nouveau 1.3.1 20120801 for 0000:05:00.0 on minor 0
[ 6.522294] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 7.946636] floppy0: no floppy controllers found
[ 8.139195] r8169 0000:04:00.0 enp4s0: link up
[ 8.139205] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 8.999092] fuse init (API version 7.26)
[ 13.852338] rfkill: input handler disabled
[ 316.319139] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ 501.627322] perf: interrupt took too long (3130 > 3128), lowering kernel.perf_event_max_sample_rate to 63900
[ 1836.292422] usb 4-2: USB disconnect, device number 5
[ 1838.272395] usb 4-2: new full-speed USB device number 6 using uhci_hcd
[otacon@otaDesk]: ~>$ Offline
Have you followed https://wiki.archlinux.org/index.php/CUPS
and tried to use the "Web interface" as mentioned there to add and configure the printer?
Offline