You are not logged in.
- Topics: Active | Unanswered
#1 2017-12-08 15:21:26
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
pacman upgrades sometimes leave "empty" packages
Occasionally pacman -Syu upgrades everything but leaves "empty" packages without issuing any errors or warnings during the upgrade process. For example, yesterday I upgraded guile and afterwards:
pacaur -Qi guile
Name : guile
Version : 2.2.3-1
Description : None
Architecture : None
URL : None
Licenses : None
Groups : None
Provides : None
Depends On : None
Optional Deps : None
Required By : make
Optional For : gnutls
Conflicts With : None
Replaces : None
Installed Size : 0.00 B
Packager : None
Build Date : None
Install Date : None
Install Reason : Explicitly installed
Install Script : No
Validated By : Unknownattempting to pacman -S guile results in more than 1000 messages, all similar to:
guile: /usr/bin/guild exists in filesystem
guile: /usr/bin/guile exists in filesystem
guile: /usr/bin/guile-config exists in filesystem
guile: /usr/bin/guile-snarf exists in filesystem
guile: /usr/bin/guile-tools exists in filesystem
guile: /usr/include/guile/2.2/libguile.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/__scm.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/alist.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/array-handle.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/array-map.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/arrays.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/async.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/atomic.h exists in filesystem
guile: /usr/include/guile/2.2/libguile/backtrace.h exists in filesystemWhat is going on here, what is the proper way to recover, and how do I prevent pacman from doing this in the first place?
Offline
#2 2017-12-08 15:45:10
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: pacman upgrades sometimes leave "empty" packages
Verify that your harddisk isn't dying: https://wiki.archlinux.org/index.php/S.M.A.R.T.
Any filesystem errors in dmesg?
Offline
#3 2017-12-08 16:15:28
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
Thanks for the response.
I'm not sure I understand smartctl. I ran sudo smartctl -t short /dev/sda, waited for the two minutes it asked, then ran sudo smartctl -H /dev/sda and it reported:
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDbut running sudo smartctl -l selftest /dev/sda says that no tests have been performed, and trying to restart the test(sudo smartctl -t short /dev/sda) tells me that a test is running:
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (90% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.and that 90% doesn't seem to change. I tried aborting and restarting the test and it hangs at 90% every time.
I don't see anything interesting from "dmesg | grep -i filesystem", should I try something else?
Offline
#4 2017-12-08 16:49:22
- WorMzy
- Administrator
- From: Scotland
- Registered: 2010-06-16
- Posts: 13,721
- Website
Re: pacman upgrades sometimes leave "empty" packages
Post the complete dmesg and/or journal.
Mod note: I also suspect that this is a hardware issue, but I'm going to move the topic to NC for now.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
#5 2017-12-08 19:51:57
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
Here's the output of dmesg. I removed some firewall blocks.
The output of journalctl is going to be... rather long, right? Do you just want the most recent boot?
[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2017-01-27
[ 0.000000] Linux version 4.14.3-1-ARCH (builduser@heftig-12222) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Thu Nov 30 18:33:13 UTC 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=UUID=7ceb7d88-4c0b-4e26-a136-3d63ffa61fe2:cryptroot root=/dev/mapper/cryptroot quiet rw
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca28ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca290000-0x00000000ccbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xc207b018-0xc208b057] usable ==> usable
[ 0.000000] e820: update [mem 0xc207b018-0xc208b057] usable ==> usable
[ 0.000000] e820: update [mem 0xc206a018-0xc207a657] usable ==> usable
[ 0.000000] e820: update [mem 0xc206a018-0xc207a657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008c000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c206a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c206a018-0x00000000c207a657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c207a658-0x00000000c207b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c207b018-0x00000000c208b057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c208b058-0x00000000ca28ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca290000-0x00000000ccbfefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042dffffff] usable
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI=0xccdfe000 ACPI 2.0=0xccdfe014 SMBIOS=0xccbfe000 ESRT=0xca6bc000
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20BUS0YF00/20BUS0YF00, BIOS JBET64WW (1.28 ) 03/16/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FF0000000 uncachable
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 00CCE00000 mask 7FFFE00000 uncachable
[ 0.000000] 5 base 00F0000000 mask 7FF0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xcce00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffffffffff240100]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000ca6bc000 to 0x00000000ca6bc060.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff95a680062000] 62000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3461f3000, 0x3461f3fff] PGTABLE
[ 0.000000] BRK [0x3461f4000, 0x3461f4fff] PGTABLE
[ 0.000000] BRK [0x3461f5000, 0x3461f5fff] PGTABLE
[ 0.000000] BRK [0x3461f6000, 0x3461f6fff] PGTABLE
[ 0.000000] BRK [0x3461f7000, 0x3461f7fff] PGTABLE
[ 0.000000] BRK [0x3461f8000, 0x3461f8fff] PGTABLE
[ 0.000000] BRK [0x3461f9000, 0x3461f9fff] PGTABLE
[ 0.000000] BRK [0x3461fa000, 0x3461fafff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7f503000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000CCDFE1C0 0000F4 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x00000000CCDE3000 010FA5 (v02 LENOVO TP-JB 00001280 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CCD68000 000040
[ 0.000000] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-JB 00001280 PTEC 00000001)
[ 0.000000] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[ 0.000000] ACPI: TCPA 0x00000000CCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CCDD7000 0006B0 (v02 Intel_ TpmTable 00001000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000CCDD6000 000042 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x00000000CCDD5000 000046 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: FPDT 0x00000000CCDD4000 000064 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x00000000CCDD3000 0002F6 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: DMAR 0x00000000CCDD2000 0000B0 (v01 LENOVO TP-JB 00001280 PTEC 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42dffb000-0x42dffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca28ffff]
[ 0.000000] node 0: [mem 0x00000000ccdff000-0x00000000ccdfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042dffffff]
[ 0.000000] On node 0 totalpages: 4162075
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 73 pages reserved
[ 0.000000] DMA zone: 3978 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12875 pages used for memmap
[ 0.000000] DMA32 zone: 823953 pages, LIFO batch:31
[ 0.000000] Normal zone: 52096 pages used for memmap
[ 0.000000] Normal zone: 3334144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000ce000000-0x00000000cfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc206a000-0xc206afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc207a000-0xc207afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc207b000-0xc207bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc208b000-0xc208bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca290000-0xccbfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff95aaadc00000 s106584 r8192 d32680 u262144
[ 0.000000] pcpu-alloc: s106584 r8192 d32680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4096967
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=UUID=7ceb7d88-4c0b-4e26-a136-3d63ffa61fe2:cryptroot root=/dev/mapper/cryptroot quiet rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16202892K/16648300K available (6560K kernel code, 1134K rwdata, 2108K rodata, 1328K init, 916K bss, 445408K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 28848 entries in 113 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 760, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2294.741 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.71 BogoMIPS (lpj=7649136)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.048420] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.050276] Security Framework initialized
[ 0.050279] Yama: becoming mindful.
[ 0.056361] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.058992] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.059100] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.059185] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.059649] CPU: Physical Processor ID: 0
[ 0.059650] CPU: Processor Core ID: 0
[ 0.059660] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.059662] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.059671] mce: CPU supports 7 MCE banks
[ 0.059691] CPU0: Thermal monitoring enabled (TM1)
[ 0.059720] process: using mwait in idle threads
[ 0.059726] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.059727] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.060142] Freeing SMP alternatives memory: 24K
[ 0.068009] smpboot: Max logical packages: 4
[ 0.068019] DMAR: Host address width 39
[ 0.068022] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.068040] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.068042] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.068055] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.068057] DMAR: RMRR base: 0x000000caf83000 end: 0x000000caf99fff
[ 0.068060] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[ 0.068064] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.068066] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.068068] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.068070] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.068997] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.068999] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.069736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.102761] TSC deadline timer enabled
[ 0.102765] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.113362] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.113418] ... version: 3
[ 0.113419] ... bit width: 48
[ 0.113420] ... generic registers: 4
[ 0.113422] ... value mask: 0000ffffffffffff
[ 0.113424] ... max period: 00007fffffffffff
[ 0.113425] ... fixed-purpose events: 3
[ 0.113427] ... event mask: 000000070000000f
[ 0.120018] Hierarchical SRCU implementation.
[ 0.133648] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.140006] smp: Bringing up secondary CPUs ...
[ 0.166706] x86: Booting SMP configuration:
[ 0.166708] .... node #0, CPUs: #1 #2 #3
[ 0.227119] smp: Brought up 1 node, 4 CPUs
[ 0.227119] smpboot: Total of 4 processors activated (18365.84 BogoMIPS)
[ 0.230757] devtmpfs: initialized
[ 0.230757] x86/mm: Memory block size: 128MB
[ 0.233972] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes)
[ 0.233972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.233972] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.233972] pinctrl core: initialized pinctrl subsystem
[ 0.233972] RTC time: 16:07:59, date: 12/08/17
[ 0.233972] NET: Registered protocol family 16
[ 0.234326] cpuidle: using governor ladder
[ 0.234326] cpuidle: using governor menu
[ 0.234326] Error parsing PCC subspaces from PCCT
[ 0.234326] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.234326] ACPI: bus type PCI registered
[ 0.234326] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.234326] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.234326] PCI: not using MMCONFIG
[ 0.234326] PCI: Using configuration type 1 for base access
[ 0.236734] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.236734] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.236805] ACPI: Added _OSI(Module Device)
[ 0.236807] ACPI: Added _OSI(Processor Device)
[ 0.236809] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.236811] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236816] ACPI: EC: EC started
[ 0.236817] ACPI: EC: interrupt blocked
[ 0.240817] ACPI: \: Used as first EC
[ 0.240821] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.240823] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.243333] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.261462] ACPI Error: Needed type [Reference], found [Integer] ffff95aa9adb9900 (20170728/exresop-103)
[ 0.261483] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170728/dswexec-461)
[ 0.261498] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170728/psparse-550)
[ 0.262203] ACPI: Dynamic OEM Table Load:
[ 0.262226] ACPI: SSDT 0xFFFF95AA9B370000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.263285] ACPI: Dynamic OEM Table Load:
[ 0.263302] ACPI: SSDT 0xFFFF95AA9AD65200 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
[ 0.265361] ACPI: Interpreter enabled
[ 0.265452] ACPI: (supports S0 S3 S4 S5)
[ 0.265454] ACPI: Using IOAPIC for interrupt routing
[ 0.265529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.266573] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.266591] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.267162] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.273823] ACPI: Power Resource [PUBS] (on)
[ 0.275025] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.275721] ACPI: Power Resource [NVP3] (on)
[ 0.275782] ACPI: Power Resource [NVP2] (on)
[ 0.283633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.283800] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[ 0.283963] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.284121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[ 0.284278] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.284402] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.284561] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.284718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.284929] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.284937] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.285180] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.285285] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.285289] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.285292] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.285295] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.285673] PCI host bridge to bus 0000:00
[ 0.285678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.285681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.285684] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.285687] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[ 0.285690] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.285693] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.285710] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.285897] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.285925] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[ 0.285940] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.285951] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.285981] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.286131] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.286154] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit]
[ 0.286371] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.286403] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[ 0.286497] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.286626] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.286660] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit]
[ 0.286769] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.286900] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 0.286928] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
[ 0.286940] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff]
[ 0.286953] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.287043] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.287168] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.287199] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit]
[ 0.287293] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.287414] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
[ 0.287525] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.287755] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
[ 0.287873] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.288095] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.288128] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff]
[ 0.288255] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.288383] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.288658] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.288684] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.288696] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 0.288708] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.288719] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 0.288731] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.288743] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff]
[ 0.288801] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.288916] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.288943] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit]
[ 0.288974] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.289124] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.289169] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit]
[ 0.289525] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.289624] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
[ 0.290118] pci 0000:02:00.0: supports D1 D2
[ 0.290121] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.300062] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.300071] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.300418] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[ 0.300582] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
[ 0.301096] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.310193] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.310201] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.312421] ACPI: EC: interrupt unblocked
[ 0.312431] ACPI: EC: event unblocked
[ 0.312442] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.312446] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.312594] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.312594] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.312594] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.312594] vgaarb: loaded
[ 0.312594] EDAC MC: Ver: 3.0.0
[ 0.312594] Registered efivars operations
[ 0.361213] PCI: Using ACPI for IRQ routing
[ 0.363485] PCI: pci_cache_line_size set to 64 bytes
[ 0.363857] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.363860] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[ 0.363862] e820: reserve RAM buffer [mem 0xc206a018-0xc3ffffff]
[ 0.363865] e820: reserve RAM buffer [mem 0xc207b018-0xc3ffffff]
[ 0.363867] e820: reserve RAM buffer [mem 0xca290000-0xcbffffff]
[ 0.363869] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff]
[ 0.363871] e820: reserve RAM buffer [mem 0x42e000000-0x42fffffff]
[ 0.364052] NetLabel: Initializing
[ 0.364054] NetLabel: domain hash size = 128
[ 0.364055] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.364089] NetLabel: unlabeled traffic allowed by default
[ 0.364128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364141] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366705] clocksource: Switched to clocksource hpet
[ 0.386811] VFS: Disk quotas dquot_6.6.0
[ 0.386856] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.386984] pnp: PnP ACPI init
[ 0.387877] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.387882] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.387885] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.387888] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.387891] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.387894] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.387898] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.387901] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.387904] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.387907] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.387910] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.387913] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.387916] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.387919] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.387923] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.387926] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.387930] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.387942] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.388154] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.388190] system 00:01: [io 0x1800-0x189f] has been reserved
[ 0.388194] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.388197] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.388200] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.388203] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.388206] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.388209] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.388213] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.388216] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.388219] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.388222] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.388225] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.388230] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.388234] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.388237] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.388241] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.388244] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.388248] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.388255] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.388404] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.388446] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.388484] pnp 00:04: Plug and Play ACPI device, IDs LEN200e PNP0f13 (active)
[ 0.389058] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.389457] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved
[ 0.389460] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved
[ 0.389467] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.389545] pnp: PnP ACPI: found 7 devices
[ 0.397308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.397346] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.397355] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.397367] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.397374] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.397389] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.397392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.397395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.397398] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
[ 0.397401] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.397404] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.397407] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.397639] NET: Registered protocol family 2
[ 0.398018] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.398489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.398747] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.398839] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.398941] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.399116] NET: Registered protocol family 1
[ 0.399147] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.400029] PCI: CLS 64 bytes, default 64
[ 0.400105] Unpacking initramfs...
[ 0.851187] Freeing initrd memory: 11248K
[ 0.851241] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.851248] software IO TLB [mem 0xbb061000-0xbf061000] (64MB) mapped at [ffff95a73b061000-ffff95a73f060fff]
[ 0.851680] Scanning for low memory corruption every 60 seconds
[ 0.853009] Initialise system trusted keyrings
[ 0.853026] Key type blacklist registered
[ 0.853117] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.855541] zbud: loaded
[ 0.858302] Key type asymmetric registered
[ 0.858389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.858460] io scheduler noop registered
[ 0.858461] io scheduler deadline registered
[ 0.858560] io scheduler cfq registered (default)
[ 0.858562] io scheduler mq-deadline registered
[ 0.858564] io scheduler kyber registered
[ 0.858614] io scheduler bfq registered
[ 0.859339] efifb: probing for efifb
[ 0.859361] efifb: framebuffer at 0xe0000000, using 1200k, total 1200k
[ 0.859364] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.859365] efifb: scrolling: redraw
[ 0.859368] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.861645] Console: switching to colour frame buffer device 80x30
[ 0.863713] fb0: EFI VGA frame buffer device
[ 0.863734] intel_idle: MWAIT substates: 0x11142120
[ 0.863736] intel_idle: v0.4.1 model 0x3D
[ 0.864152] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.864824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.866296] rtc_cmos 00:02: RTC can wake from S4
[ 0.866486] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.866528] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.866560] intel_pstate: Intel P-state driver initializing
[ 0.867112] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.867235] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.867726] NET: Registered protocol family 10
[ 0.875783] Segment Routing with IPv6
[ 0.875832] NET: Registered protocol family 17
[ 0.876510] RAS: Correctable Errors collector initialized.
[ 0.876563] microcode: sig=0x306d4, pf=0x40, revision=0x25
[ 0.876720] microcode: Microcode Update Driver: v2.2.
[ 0.876749] sched_clock: Marking stable (876709765, 0)->(960503416, -83793651)
[ 0.877198] registered taskstats version 1
[ 0.877212] Loading compiled-in X.509 certificates
[ 0.877244] zswap: loaded using pool lzo/zbud
[ 0.882066] Key type big_key registered
[ 0.882568] Magic number: 13:399:135
[ 0.882688] rtc_cmos 00:02: setting system clock to 2017-12-08 16:08:00 UTC (1512749280)
[ 0.885800] Freeing unused kernel memory: 1328K
[ 0.885802] Write protecting the kernel read-only data: 12288k
[ 0.886447] Freeing unused kernel memory: 1620K
[ 0.891965] Freeing unused kernel memory: 1988K
[ 0.961031] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.963078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.963114] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.967796] ACPI: bus type USB registered
[ 0.967821] usbcore: registered new interface driver usbfs
[ 0.967831] usbcore: registered new interface driver hub
[ 0.967860] usbcore: registered new device driver usb
[ 0.968536] SCSI subsystem initialized
[ 0.968610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.968807] ehci-pci: EHCI PCI platform driver
[ 0.968963] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.968969] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.968980] ehci-pci 0000:00:1d.0: debug port 2
[ 0.970744] libata version 3.00 loaded.
[ 0.972872] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.972892] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000
[ 0.973616] AVX2 version of gcm_enc/dec engaged.
[ 0.973617] AES CTR mode by8 optimization enabled
[ 0.986470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.986682] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.986859] hub 1-0:1.0: USB hub found
[ 0.986866] hub 1-0:1.0: 3 ports detected
[ 0.987140] ahci 0000:00:1f.2: version 3.0
[ 0.997387] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 0.997389] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.997879] scsi host0: ahci
[ 0.998020] scsi host1: ahci
[ 0.998148] scsi host2: ahci
[ 0.998194] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 43
[ 0.998196] ata2: DUMMY
[ 0.998196] ata3: DUMMY
[ 0.998311] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.998318] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.999389] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 0.999393] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.999565] hub 2-0:1.0: USB hub found
[ 0.999576] hub 2-0:1.0: 11 ports detected
[ 1.000302] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.000304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.000415] hub 3-0:1.0: USB hub found
[ 1.000421] hub 3-0:1.0: 4 ports detected
[ 1.311296] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.314009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.314016] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.314362] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.315897] ata1.00: supports DRM functions and may not be fully accessible
[ 1.316584] ata1.00: ATA-10: INTEL SSDSC2BF180A5L, LTVi, max UDMA/133
[ 1.316589] ata1.00: 351651888 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.316728] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.330079] usb 2-7: new full-speed USB device number 2 using xhci_hcd
[ 1.330531] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.330537] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.330900] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.332431] ata1.00: supports DRM functions and may not be fully accessible
[ 1.347925] ata1.00: configured for UDMA/133
[ 1.348337] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LTVi PQ: 0 ANSI: 5
[ 1.352976] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[ 1.352990] sd 0:0:0:0: [sda] Write Protect is off
[ 1.352994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.353013] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.354046] sda: sda1 sda2
[ 1.370607] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.370609] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.400489] device-mapper: uevent: version 1.0.3
[ 1.400576] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.464553] hub 1-1:1.0: USB hub found
[ 1.464690] hub 1-1:1.0: 8 ports detected
[ 1.596767] usb 2-8: new high-speed USB device number 3 using xhci_hcd
[ 1.866754] tsc: Refined TSC clocksource calibration: 2294.684 MHz
[ 1.866772] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139776891, max_idle_ns: 440795250948 ns
[ 2.880251] clocksource: Switched to clocksource tsc
[ 6.294867] NET: Registered protocol family 38
[ 6.715169] random: crng init done
[ 6.793368] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.911251] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.918091] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 6.918219] systemd[1]: Detected architecture x86-64.
[ 6.918493] systemd[1]: Set hostname to <mars>.
[ 6.994184] systemd[1]: Created slice User and Session Slice.
[ 6.994390] systemd[1]: Created slice System Slice.
[ 6.994442] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.995126] systemd[1]: Mounting Kernel Debug File System...
[ 6.995205] systemd[1]: Listening on udev Control Socket.
[ 6.995442] systemd[1]: Created slice system-systemd-fsck.slice.
[ 6.995518] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.009286] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 7.055820] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 7.069182] Adding 2097148k swap on /swapfile. Priority:-2 extents:5 across:3514364k SSFS
[ 7.194693] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 7.196556] pps_core: LinuxPPS API ver. 1 registered
[ 7.196558] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.198711] PTP clock support registered
[ 7.199709] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input205
[ 7.199839] ACPI: Lid Switch [LID]
[ 7.199897] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input206
[ 7.199909] ACPI: Sleep Button [SLPB]
[ 7.199975] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input207
[ 7.199991] ACPI: Power Button [PWRF]
[ 7.205700] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.206743] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.209863] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 7.209864] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 7.210178] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 7.244059] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.270452] ACPI: AC Adapter [AC] (off-line)
[ 7.273509] Linux agpgart interface v0.103
[ 7.282050] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 7.282150] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 7.282577] ACPI: Battery Slot [BAT0] (battery present)
[ 7.286209] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 7.288899] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.291279] thermal LNXTHERM:00: registered as thermal_zone1
[ 7.291281] ACPI: Thermal Zone [THM0] (37 C)
[ 7.294010] ACPI: Battery Slot [BAT1] (battery present)
[ 7.299963] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 7.321822] Non-volatile memory driver v1.3
[ 7.325916] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 7.325918] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.325918] thinkpad_acpi: ThinkPad BIOS JBET64WW (1.28 ), EC unknown
[ 7.325919] thinkpad_acpi: Lenovo ThinkPad T450, model 20BUS0YF00
[ 7.332362] thinkpad_acpi: radio switch found; radios are enabled
[ 7.332454] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 7.332455] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 7.337276] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 7.346600] input: PC Speaker as /devices/platform/pcspkr/input/input224
[ 7.377644] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input221
[ 7.384067] Intel(R) Wireless WiFi driver for Linux
[ 7.384068] Copyright(c) 2003- 2015 Intel Corporation
[ 7.390393] iwlwifi 0000:03:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
[ 7.390769] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 7.390771] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.390772] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.390772] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.390773] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.400505] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:04:4b:fb
[ 7.400512] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 7.400537] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 7.400665] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 7.400690] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.416096] [drm] Memory usable by graphics device = 4096M
[ 7.416099] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[ 7.416100] fb: switching to inteldrmfb from EFI VGA
[ 7.416127] Console: switching to colour dummy device 80x25
[ 7.416279] [drm] Replacing VGA console driver
[ 7.425629] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.425632] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.425634] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[ 7.425635] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.425636] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.425638] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 7.425639] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 7.425641] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 7.426326] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.426328] [drm] Driver supports precise vblank timestamp query.
[ 7.426427] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.438473] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 7.461008] iwlwifi 0000:03:00.0: base HW address: 5c:e0:c5:a2:1a:e3
[ 7.467631] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 7.468264] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.484591] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input230
[ 7.486615] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input229
[ 7.487303] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input231
[ 7.487430] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input232
[ 7.487721] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input233
[ 7.487861] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input234
[ 7.497772] iTCO_vendor_support: vendor-support=0
[ 7.498326] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.498365] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 7.498546] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.511559] intel_rapl: Found RAPL domain package
[ 7.511561] intel_rapl: Found RAPL domain core
[ 7.511562] intel_rapl: Found RAPL domain uncore
[ 7.511563] intel_rapl: Found RAPL domain dram
[ 7.548230] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.548496] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.548514] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 7.573194] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 7.638075] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.639779] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 7.650603] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input235
[ 7.650659] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input236
[ 7.650709] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input237
[ 7.650758] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input238
[ 7.650805] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input239
[ 7.810540] fbcon: inteldrmfb (fb0) is primary device
[ 8.187124] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 8.216312] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 8.216318] psmouse serio1: synaptics: Your touchpad (PNP: LEN200e PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 8.225739] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.276499] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560
[ 8.276513] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 8.314624] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input228
[ 8.317813] mousedev: PS/2 mouse device common for all mice
[ 8.346888] media: Linux media interface: v0.10
[ 8.354995] Linux video capture interface: v2.00
[ 8.357867] Bluetooth: Core ver 2.22
[ 8.357882] NET: Registered protocol family 31
[ 8.357882] Bluetooth: HCI device and connection manager initialized
[ 8.357885] Bluetooth: HCI socket layer initialized
[ 8.357887] Bluetooth: L2CAP socket layer initialized
[ 8.357891] Bluetooth: SCO socket layer initialized
[ 8.436939] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.444454] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.480678] usbcore: registered new interface driver btusb
[ 8.491148] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366)
[ 8.495459] Bluetooth: hci0: read Intel version: 370810011003110e25
[ 8.495460] Bluetooth: hci0: Intel device is already patched. patch num: 25
[ 8.498522] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.498524] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
[ 8.498526] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 8.498527] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.498632] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input241
[ 8.498720] usbcore: registered new interface driver uvcvideo
[ 8.498721] USB Video Class driver (1.1.1)
[ 8.557046] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.682113] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.948520] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.981529] Console: switching to colour frame buffer device 200x56
[ 9.005034] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.100815] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.100816] Bluetooth: BNEP filters: protocol multicast
[ 9.100819] Bluetooth: BNEP socket layer initialized
[ 9.148169] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input240
[ 9.166599] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 12.215822] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 13.468576] wlp3s0: authenticate with 70:db:98:98:8f:ed
[ 13.473674] wlp3s0: send auth to 70:db:98:98:8f:ed (try 1/3)
[ 13.475929] wlp3s0: authenticated
[ 13.476970] wlp3s0: associate with 70:db:98:98:8f:ed (try 1/3)
[ 13.479476] wlp3s0: RX AssocResp from 70:db:98:98:8f:ed (capab=0x1111 status=0 aid=2)
[ 13.481264] wlp3s0: associated
[ 13.481285] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 13.541923] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:8f:ed
[ 132.633476] [UFW BLOCK] IN=wlp3s0 OUT= MAC=5c:e0:c5:a2:1a:e3:00:6c:bc:1c:5f:07:08:00 SRC=31.220.45.3 DST=10.147.187.102 LEN=52 TOS=0x08 PREC=0x40 TTL=53 ID=62629 DF PROTO=TCP SPT=22067 DPT=33058 WINDOW=227 RES=0x00 ACK FIN URGP=0
[ 132.969604] [UFW BLOCK] IN=wlp3s0 OUT= MAC=5c:e0:c5:a2:1a:e3:00:6c:bc:1c:5f:07:08:00 SRC=31.220.45.3 DST=10.147.187.102 LEN=52 TOS=0x08 PREC=0x40 TTL=53 ID=62630 DF PROTO=TCP SPT=22067 DPT=33058 WINDOW=227 RES=0x00 ACK FIN URGP=0
[ 133.452821] [UFW BLOCK] IN=wlp3s0 OUT= MAC=5c:e0:c5:a2:1a:e3:00:6c:bc:1c:5f:07:08:00 SRC=31.220.45.3 DST=10.147.187.102 LEN=52 TOS=0x08 PREC=0x40 TTL=53 ID=62631 DF PROTO=TCP SPT=22067 DPT=33058 WINDOW=227 RES=0x00 ACK FIN URGP=0
[ 134.113677] [UFW BLOCK] IN=wlp3s0 OUT= MAC=5c:e0:c5:a2:1a:e3:00:6c:bc:1c:5f:07:08:00 SRC=31.220.45.3 DST=10.147.187.102 LEN=52 TOS=0x08 PREC=0x40 TTL=53 ID=62632 DF PROTO=TCP SPT=22067 DPT=33058 WINDOW=227 RES=0x00 ACK FIN URGP=0
[ 1863.093407] wlp3s0: AP 70:db:98:98:8f:ed changed bandwidth, new config is 5540 MHz, width 1 (5540/0 MHz)
[ 1863.093408] wlp3s0: AP 70:db:98:98:8f:ed changed bandwidth in a way we can't support - disconnect
[ 1863.093409] wlp3s0: failed to follow AP 70:db:98:98:8f:ed bandwidth change, disconnect
[ 1863.231187] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 1863.698044] wlp3s0: authenticate with 70:db:98:98:8f:e2
[ 1863.703790] wlp3s0: send auth to 70:db:98:98:8f:e2 (try 1/3)
[ 1863.807859] wlp3s0: send auth to 70:db:98:98:8f:e2 (try 2/3)
[ 1863.972577] wlp3s0: send auth to 70:db:98:98:8f:e2 (try 3/3)
[ 1864.074637] wlp3s0: authentication with 70:db:98:98:8f:e2 timed out
[ 1864.584268] wlp3s0: authenticate with 70:db:98:b6:ad:2d
[ 1864.592392] wlp3s0: send auth to 70:db:98:b6:ad:2d (try 1/3)
[ 1864.594163] wlp3s0: authenticated
[ 1864.594489] wlp3s0: associate with 70:db:98:b6:ad:2d (try 1/3)
[ 1864.597217] wlp3s0: RX AssocResp from 70:db:98:b6:ad:2d (capab=0x1111 status=0 aid=7)
[ 1864.599126] wlp3s0: associated
[ 1864.612972] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:b6:ad:2d
[ 2168.877101] wlp3s0: disconnect from AP 70:db:98:b6:ad:2d for new auth to 70:db:98:98:8f:ed
[ 2168.883000] wlp3s0: authenticate with 70:db:98:98:8f:ed
[ 2168.887505] wlp3s0: send auth to 70:db:98:98:8f:ed (try 1/3)
[ 2168.889403] wlp3s0: authenticated
[ 2168.891521] wlp3s0: associate with 70:db:98:98:8f:ed (try 1/3)
[ 2168.893978] wlp3s0: RX ReassocResp from 70:db:98:98:8f:ed (capab=0x1111 status=0 aid=1)
[ 2168.904190] wlp3s0: associated
[ 2168.962715] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:8f:ed
[ 2470.629006] wlp3s0: disconnect from AP 70:db:98:98:8f:ed for new auth to 70:db:98:b6:ad:2d
[ 2470.634257] wlp3s0: authenticate with 70:db:98:b6:ad:2d
[ 2470.637681] wlp3s0: send auth to 70:db:98:b6:ad:2d (try 1/3)
[ 2470.639653] wlp3s0: authenticated
[ 2470.641860] wlp3s0: associate with 70:db:98:b6:ad:2d (try 1/3)
[ 2470.644704] wlp3s0: RX ReassocResp from 70:db:98:b6:ad:2d (capab=0x1111 status=0 aid=17)
[ 2470.645884] wlp3s0: associated
[ 2470.720136] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:b6:ad:2d
[ 2772.150295] wlp3s0: disconnect from AP 70:db:98:b6:ad:2d for new auth to 70:db:98:98:8f:ed
[ 2772.160144] wlp3s0: authenticate with 70:db:98:98:8f:ed
[ 2772.164725] wlp3s0: send auth to 70:db:98:98:8f:ed (try 1/3)
[ 2772.168190] wlp3s0: authenticated
[ 2772.172171] wlp3s0: associate with 70:db:98:98:8f:ed (try 1/3)
[ 2772.175382] wlp3s0: RX ReassocResp from 70:db:98:98:8f:ed (capab=0x1111 status=0 aid=1)
[ 2772.178143] wlp3s0: associated
[ 2772.201998] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:8f:ed
[ 4180.614876] wlp3s0: AP 70:db:98:98:8f:ed changed bandwidth, new config is 5500 MHz, width 1 (5500/0 MHz)
[ 4180.614882] wlp3s0: AP 70:db:98:98:8f:ed changed bandwidth in a way we can't support - disconnect
[ 4180.614885] wlp3s0: failed to follow AP 70:db:98:98:8f:ed bandwidth change, disconnect
[ 4180.750363] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 4180.750430] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 4181.209646] wlp3s0: authenticate with 70:db:98:b6:ad:2d
[ 4181.214659] wlp3s0: send auth to 70:db:98:b6:ad:2d (try 1/3)
[ 4181.222548] wlp3s0: authenticated
[ 4181.223633] wlp3s0: associate with 70:db:98:b6:ad:2d (try 1/3)
[ 4181.226249] wlp3s0: RX AssocResp from 70:db:98:b6:ad:2d (capab=0x1111 status=0 aid=27)
[ 4181.228136] wlp3s0: associated
[ 4181.316108] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:b6:ad:2d
[ 4483.055458] wlp3s0: disconnect from AP 70:db:98:b6:ad:2d for new auth to 70:db:98:98:8f:ed
[ 4483.066431] wlp3s0: authenticate with 70:db:98:98:8f:ed
[ 4483.070718] wlp3s0: send auth to 70:db:98:98:8f:ed (try 1/3)
[ 4483.072871] wlp3s0: authenticated
[ 4483.073944] wlp3s0: associate with 70:db:98:98:8f:ed (try 1/3)
[ 4483.077092] wlp3s0: RX ReassocResp from 70:db:98:98:8f:ed (capab=0x1111 status=0 aid=8)
[ 4483.078308] wlp3s0: associated
[ 4483.105505] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:8f:ed
[ 4772.795932] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34009 PROTO=2
[ 4773.103310] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34015 PROTO=2
[ 4774.127117] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34024 PROTO=2
[ 5561.380357] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=39866 PROTO=2
[ 5561.994715] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=39874 PROTO=2
[ 5563.018368] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=39880 PROTO=2
[ 8058.647725] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 8058.647871] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 8059.270303] wlp3s0: authenticate with 70:db:98:98:88:4d
[ 8059.278080] wlp3s0: send auth to 70:db:98:98:88:4d (try 1/3)
[ 8059.279707] wlp3s0: authenticated
[ 8059.284474] wlp3s0: associate with 70:db:98:98:88:4d (try 1/3)
[ 8059.287111] wlp3s0: RX AssocResp from 70:db:98:98:88:4d (capab=0x1111 status=0 aid=19)
[ 8059.288959] wlp3s0: associated
[ 8059.367065] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:88:4d
[ 8149.376834] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5383 PROTO=2
[ 8149.479347] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5393 PROTO=2
[ 8150.605749] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5402 PROTO=2
[ 8151.629795] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5409 PROTO=2
[ 8230.683281] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5927 PROTO=2
[ 8230.683359] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5934 PROTO=2
[ 8231.809176] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5940 PROTO=2
[ 8232.833068] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5944 PROTO=2
[ 8257.409315] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6132 PROTO=2
[ 8257.511664] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6139 PROTO=2
[ 8258.638075] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6141 PROTO=2
[ 8259.662079] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6144 PROTO=2
[ 8267.239725] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6220 PROTO=2
[ 8267.854130] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6226 PROTO=2
[ 8268.878141] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6233 PROTO=2
[ 8326.631873] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6618 PROTO=2
[ 8327.655922] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6624 PROTO=2
[ 8328.577561] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=6627 PROTO=2
[ 8360.961555] wlp3s0: disconnect from AP 70:db:98:98:88:4d for new auth to 70:db:98:98:8f:ed
[ 8360.971444] wlp3s0: authenticate with 70:db:98:98:8f:ed
[ 8360.975494] wlp3s0: send auth to 70:db:98:98:8f:ed (try 1/3)
[ 8360.977507] wlp3s0: authenticated
[ 8360.979586] wlp3s0: associate with 70:db:98:98:8f:ed (try 1/3)
[ 8360.982340] wlp3s0: RX ReassocResp from 70:db:98:98:8f:ed (capab=0x1111 status=0 aid=28)
[ 8360.984408] wlp3s0: associated
[ 8361.002571] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:98:8f:ed
[ 8642.808926] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8920 PROTO=2
[ 8642.808956] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8924 PROTO=2
[ 8644.037406] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8928 PROTO=2
[ 8645.061402] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:2c:d0:2d:b2:86:5d:08:00 SRC=10.147.0.4 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8931 PROTO=2
[ 9711.212902] wlp3s0: deauthenticating from 70:db:98:98:8f:ed by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9711.219320] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 9711.229116] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9711.925773] PM: suspend entry (deep)
[ 9711.925775] PM: Syncing filesystems ... done.
[ 9712.002062] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9712.003386] OOM killer disabled.
[ 9712.003386] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 9712.004109] Suspending console(s) (use no_console_suspend to debug)
[ 9712.131744] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9712.135831] sd 0:0:0:0: [sda] Stopping disk
[ 9712.339131] e1000e: EEE TX LPI TIMER: 00000011
[ 9712.561525] ACPI: Preparing to enter system sleep state S3
[ 9712.814120] ACPI: EC: event blocked
[ 9712.814121] ACPI: EC: EC stopped
[ 9712.814122] PM: Saving platform NVS memory
[ 9712.814148] Disabling non-boot CPUs ...
[ 9712.843086] smpboot: CPU 1 is now offline
[ 9712.862276] smpboot: CPU 2 is now offline
[ 9712.888848] smpboot: CPU 3 is now offline
[ 9712.890746] ACPI: Low-level resume complete
[ 9712.890805] ACPI: EC: EC started
[ 9712.890805] PM: Restoring platform NVS memory
[ 9712.892838] Enabling non-boot CPUs ...
[ 9712.892865] x86: Booting SMP configuration:
[ 9712.892866] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9713.066005] cache: parent cpu1 should not be sleeping
[ 9713.066118] CPU1 is up
[ 9713.066135] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 9713.239340] cache: parent cpu2 should not be sleeping
[ 9713.239465] CPU2 is up
[ 9713.239480] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9713.419347] cache: parent cpu3 should not be sleeping
[ 9713.419643] CPU3 is up
[ 9713.427515] ACPI: Waking up from system sleep state S3
[ 9713.719510] thinkpad_acpi: EC reports that Thermal Table has changed
[ 9713.972367] ACPI: EC: event unblocked
[ 9713.972387] sd 0:0:0:0: [sda] Starting disk
[ 9714.199721] usb 2-8: reset high-speed USB device number 3 using xhci_hcd
[ 9714.286292] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9714.292554] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9714.292557] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9714.292903] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 9714.294439] ata1.00: supports DRM functions and may not be fully accessible
[ 9714.315490] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9714.315494] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9714.315833] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 9714.317429] ata1.00: supports DRM functions and may not be fully accessible
[ 9714.332863] ata1.00: configured for UDMA/133
[ 9714.462916] usb 2-7: reset full-speed USB device number 2 using xhci_hcd
[ 9714.709477] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 9714.741423] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 9714.845870] usb 2-7:1.0: rebind failed: -517
[ 9714.845876] usb 2-7:1.1: rebind failed: -517
[ 9714.846225] acpi LNXPOWER:02: Turning OFF
[ 9714.846602] OOM killer enabled.
[ 9714.846604] Restarting tasks ... done.
[ 9714.863798] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 9714.864901] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 9714.868451] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 9714.883722] PM: suspend exit
[ 9714.983499] e1000e: enp0s25 NIC Link is Down
[ 9714.984283] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9715.111074] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 9715.192962] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 9715.194947] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9715.303713] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9715.429114] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9715.491833] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9718.773715] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9719.774761] wlp3s0: authenticate with 70:db:98:9e:0a:4d
[ 9719.780191] wlp3s0: send auth to 70:db:98:9e:0a:4d (try 1/3)
[ 9719.782048] wlp3s0: authenticated
[ 9719.782646] wlp3s0: associate with 70:db:98:9e:0a:4d (try 1/3)
[ 9719.785359] wlp3s0: RX AssocResp from 70:db:98:9e:0a:4d (capab=0x1111 status=0 aid=177)
[ 9719.787692] wlp3s0: associated
[ 9719.787723] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 9719.795256] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:db:98:9e:0a:4dOffline
#6 2017-12-08 19:57:46
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: pacman upgrades sometimes leave "empty" packages
The output of the following please
# smartctl -a /dev/sdaOffline
#7 2017-12-08 19:59:15
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.3-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2BF180A5L
Serial Number: CVTS516001Z2180IGN
LU WWN Device Id: 5 5cd2e4 04bfe2c87
Firmware Version: LTVi
User Capacity: 180,045,766,656 bytes [180 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 8 13:58:18 2017 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4395) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 4) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 3
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3096
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2191
170 Unknown_Attribute 0x0033 098 100 010 Pre-fail Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 27
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 77
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 031 100 000 Old_age Always - 31 (Min/Max 14/47)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27
194 Temperature_Celsius 0x0032 031 100 000 Old_age Always - 31 (Min/Max 14/47)
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 187021
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 42
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 098 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 085 100 000 Old_age Always - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 187021
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 140435
249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 49536
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 00% 3095 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Offline
#8 2017-12-08 20:13:37
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: pacman upgrades sometimes leave "empty" packages
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 3
....
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 77Those values would worry me but it also depends on if the values increase or are now static.
# 1 Short offline Aborted by host 00% 3095 -Unfortunately there is no record of it progressing to 10% or why it stopped at 10%.
Do you have a backup of all your data. After that would fsck the filesystems assuming fsck is meaningful to that filesystem type.
Then possibly Badblocks#Testing_for_Bad_Sectors either a read only test or a none destructive read write test.
Offline
#9 2017-12-08 20:21:57
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
Thanks. So I should keep an eye on the 3 and 77 values and make sure they don't increase... today? this week? ever?
Yes, all the data is backed up, but I'd rather not have to restore it if I don't have to.
It was my impression that the filesystem is fsck'ed on boot? This is my /etc/fstab:
/dev/mapper/cryptroot / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1 UUID=E8C0-A08B
/dev/sda1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
/swapfile none swap defaults 0 0and I thought the 1 and 2's at the end meant to check / first and /boot second. Or am I misunderstanding that?
I'll look into running badblocks. Looks like I'm not supposed to run it on a mounted system. I'll have to wait until after work to boot from a usb and run it then.
Offline
#10 2017-12-08 20:40:26
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: pacman upgrades sometimes leave "empty" packages
See https://bbs.archlinux.org/viewtopic.php … 5#p1307895 for if fsck will be run.
I meant more in the case of the filesystem being ext3/ext4 forcing an fsck see below (other filesystems have their own peculiarities relating to fsck as well)
For
ext3 and ext4 filesystems that use a journal, if the system has been
shut down uncleanly without any errors, normally, after replaying the
committed transactions in the journal, the file system should be
marked as clean. Hence, for filesystems that use journalling, e2fsck
will normally replay the journal and exit, unless its superblock indi‐
cates that further checking is required.Offline
#11 2017-12-08 20:52:53
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
Well that seems more complicated than it needs to be.
If I understood it correctly, though, since I'm mounting the system rw and have fsck in HOOKS in /etc/mkinitcpio.conf, then the system should be fsck'ed on boot. It's an ext4 system.
Offline
#12 2017-12-08 21:38:17
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: pacman upgrades sometimes leave "empty" packages
You might also want to perform
$ pacman -Qkk #have pacman check the the files it is tracking are present and as expected
$ pacman -Dkk #have pacman check its own database is internally consistentOffline
#13 2017-12-09 04:08:29
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,198
Re: pacman upgrades sometimes leave "empty" packages
Note that there is something odd about the SMART readout. Your disk is reporting higher WORST values than CURRENT. That doesn't make sense.
But note that I've never dealt with output for a SATA SSD from SMART, so I'm comparing with output for an HD. (My current drive gives nothing anywhere near as detailed.)
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#14 2017-12-09 09:13:53
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,867
Re: pacman upgrades sometimes leave "empty" packages
For most disks any but the RAW column is more or less useless, in part because the value is strictly accumulating (ie. raw == worst)
He *needs* to run badblocks and see whether the re-allocation increases drastically. In case, the disc is likely toast (what given the lifetime could mean RMA)
Offline
#15 2017-12-09 17:14:36
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
Here's the output of badblocks -nsv:
Checking for bad blocks in non-destructive read-write mode
From block 0 to 175825943
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: done
Pass completed, 0 bad blocks found (0/0/0 errors)
badblocks -nsv /dev/sdb 23.66s user 86.82 system 1% cpu 2:23:21.33 totalOffline
#16 2017-12-09 17:21:29
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
And the warnings from pacman -Qkk
warning: intel-ucode: /boot/intel-ucode.img (Permissions mismatch)
warning: intel-ucode: /boot/intel-ucode.img (Modification time mismatch)
warning: linux: /boot/vmlinuz-linux (Permissions mismatch)
warning: linux: /boot/vmlinuz-linux (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.alias (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.alias.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.builtin.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.dep (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.dep.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.devname (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.softdep (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.symbols (Modification time mismatch)
warning: linux: /usr/lib/modules/4.14.4-1-ARCH/modules.symbols.bin (Modification time mismatch)
warning: linux-lts: /boot/vmlinuz-linux-lts (Permissions mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.alias (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.alias.bin (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.builtin.bin (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.dep (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.dep.bin (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.devname (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.softdep (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.symbols (Modification time mismatch)
warning: linux-lts: /usr/lib/modules/4.9.67-1-lts/modules.symbols.bin (Modification time mismatch)
warning: vlc: /usr/lib/vlc/plugins/plugins.dat (Modification time mismatch)
warning: vlc: /usr/lib/vlc/plugins/plugins.dat (Size mismatch)
warning: xorg-fonts-encodings: /usr/share/fonts/encodings/encodings.dir (No such file or directory)
warning: xorg-fonts-encodings: /usr/share/fonts/encodings/large/encodings.dir (No such file or directory)the errors from pacman -Dkk:
error: missing 'rfkill>=0.4-3' dependency for 'archboot'
error: missing 'yp-tools>=2.12-2' dependency for 'archboot'
error: missing 'eventlog>=0.2.12-3' dependency for 'archboot'
error: missing 'php<7.2' dependency for 'nextcloud'
error: missing 'php-gd<7.2' dependency for 'nextcloud'Offline
#17 2017-12-09 17:26:47
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: pacman upgrades sometimes leave "empty" packages
The output of those commands all look fine to me so that leaves it as somewhat of a mystery why smart selftest had issues and pacman losing track of files.
Offline
#18 2017-12-09 18:32:45
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,867
Re: pacman upgrades sometimes leave "empty" packages
Bad mirror?
3rd party guile installation?
=> updated smart log (to check whether the Runtime_Bad_Block's are gone) and pacman log.
Also your configured mirror and finally try to force install guile and see whether that clears the stage.
Offline
#19 2017-12-09 20:27:17
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
The mirrors I'm using aren't listed as out of sync or anything.
It's the official guile from [extra].
Force installing guile fixed the issue, but the problem reoccurs every now and then with different packages. The last time it happened was about 2 months ago with linux. Now I've got linux and linux-lts installed in case that happens again!
Offline
#20 2017-12-10 08:54:39
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,867
Re: pacman upgrades sometimes leave "empty" packages
The only thing I could imagine is some failed sync after writing the database, maybe due to the encrypted SSD?
Do you remember a pattern, like "this always happens if I shut down the system immedately after the update" or so?
Offline
#21 2017-12-10 14:23:13
- zreeon
- Member
- Registered: 2015-10-17
- Posts: 28
Re: pacman upgrades sometimes leave "empty" packages
I don't remember any pattern like that, but I'll keep an eye out for one. Hard to spot though since this happens months apart from each other.
Offline
#22 2017-12-11 02:45:33
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,198
Re: pacman upgrades sometimes leave "empty" packages
seth wrote:
For most disks any but the RAW column is more or less useless, in part because the value is strictly accumulating (ie. raw == worst)
He *needs* to run badblocks and see whether the re-allocation increases drastically. In case, the disc is likely toast (what given the lifetime could mean RMA)
I wasn't disagreeing. More saying: I wouldn't trust everything it says. Another reason to investigate further, in case one were needed.
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline