You are not logged in.
- Topics: Active | Unanswered
#1 2018-01-14 05:01:52
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
[Solved] Network Manager (nw-applet) not connecting to wifi
Hello,
I've recently installed Arch on my Thinkpad (using i3-gaps and LightDM if that matters) and I've been tinkering over Ethernet. I want to get wifi working, but I've been unsuccessful mostly.
I've manually turned on wifi by following (I think I've done everything right) steps located here. I entered the following lines whenever I wanted to connect to wifi...
sudo wpa_supplicant -B -i wlp4s0 -c /etc/wpa_supplicant/wpa_supplicant.conf
sudo dhcpcd wlp4s0
I am at university and use an eduroam type wifi. In my wpa_supplicant.conf file I have this...
network={
ssid="eduroam"
key_mgmt=WPA-EAP
identity="my_username_goes_here"
password="my_password_goes_here"
}
Now, I installed network manager and nw-applet. As far as I can tell, everything installed correctly. This is the output for "systemctl list-unit-files --state enabled". I apologize for the non-screenshot, Ethernet is currently connected to my desktop. When I click on the system tray icon, there is a valid list of wifi connections. But when I click on eduroam (the one I need to use), there is a loading circle for about 10 seconds, then the icon goes back to being unconnected.
Thank you in advance for any help. I'll try to help you help me, but I am a noob.
Last edited by Deditionis (2018-01-25 23:12:09)
Offline
#2 2018-01-14 05:20:58
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Offline
#3 2018-01-14 15:11:19
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
I've installed dhclient and have updated my NetworkManager.conf accordingly:
# Configuration file for NetworkManager.
# See "man 5 NetworkManager.conf" for details
dhcp=dhclientNow, when I click on the nw-applet icon, it says NetworkManager is not running. I ran "systemctl list-unit-files --state enabled" again and the same result happens as previously mentioned.
Last edited by Deditionis (2018-01-14 15:14:34)
Offline
#4 2018-01-14 16:53:12
- robg
- Member
- Registered: 2015-03-05
- Posts: 225
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
To provide a bit more information, could you undo the changes to your NetworkManager.conf file and, after a fruitless attempt at connecting, post the outputs of `dmesg` and `journalctl -xe`? Also, please post a link to a screenshot that shows the authentication dialog for your university network with your entries (make sure to black out sensitive stuff...).
Offline
#5 2018-01-14 18:16:51
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
This is what I got for both dmesg and journalctl -xe.
[~]: dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.12-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Wed Nov 8 11:54:06 CET 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archvol-root rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000045040fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000045041000-0x0000000045041fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000045042000-0x0000000045042fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000045043000-0x000000004e984fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000004e985000-0x000000004ea4cfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000004ea4d000-0x000000004ff2bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000004ff2c000-0x000000004ff99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000004ff9a000-0x000000004fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000004ffff000-0x000000004fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000050000000-0x0000000057ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000058600000-0x000000005c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002a27fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by Lenovo
[ 0.000000] efi: SMBIOS=0x4f0e3000 SMBIOS 3.0=0x4f0e0000 ACPI=0x4fffe000 ACPI 2.0=0x4fffe014 ESRT=0x4ef58000 MEMATTR=0x49827298
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 20HRCTO1WW/20HRCTO1WW, BIOS N1MET39W (1.24 ) 09/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x2a2800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 0060000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 005C000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 005A000000 mask 7FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x50000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000004ef58000 to 0x000000004ef58088.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8ec2c0097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x196d64000, 0x196d64fff] PGTABLE
[ 0.000000] BRK [0x196d65000, 0x196d65fff] PGTABLE
[ 0.000000] BRK [0x196d66000, 0x196d66fff] PGTABLE
[ 0.000000] BRK [0x196d67000, 0x196d67fff] PGTABLE
[ 0.000000] BRK [0x196d68000, 0x196d68fff] PGTABLE
[ 0.000000] BRK [0x196d69000, 0x196d69fff] PGTABLE
[ 0.000000] BRK [0x196d6a000, 0x196d6afff] PGTABLE
[ 0.000000] BRK [0x196d6b000, 0x196d6bfff] PGTABLE
[ 0.000000] BRK [0x196d6c000, 0x196d6cfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x367f1000-0x373effff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000004FFFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000004FFC2188 0000FC (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x000000004FFF5000 0000F4 (v05 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x000000004FFD0000 020B92 (v02 LENOVO SKL 00000000 INTL 20160527)
[ 0.000000] ACPI: FACS 0x000000004FF3D000 000040
[ 0.000000] ACPI: SSDT 0x000000004FFFC000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
[ 0.000000] ACPI: TPM2 0x000000004FFFB000 000034 (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x000000004FF53000 000042 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFF7000 003235 (v02 LENOVO SaSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFF6000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x000000004FFF4000 000038 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x000000004FFF3000 0000BC (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x000000004FFF2000 00003C (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: ECDT 0x000000004FFF1000 000053 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFCE000 001627 (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x000000004FFCD000 000028 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x000000004FFCC000 00004A (v02 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFCA000 0017AE (v02 LENOVO CpuSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC9000 00056D (v02 LENOVO CtdpB 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC8000 000678 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: WSMT 0x000000004FFC7000 000028 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFC6000 000141 (v02 LENOVO HdaDsp 00000000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC5000 00050D (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x000000004FFC4000 000034 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DBG2 0x000000004FFC3000 000054 (v00 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x000000004FFFD000 000055 (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DMAR 0x000000004FFC1000 0000A8 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: ASF! 0x000000004FFC0000 0000A0 (v32 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: FPDT 0x000000004FFBF000 000044 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: BGRT 0x000000004FFBE000 000038 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x000000004FF3A000 00013E (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002a27fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2a27fb000-0x2a27fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000002a27fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000045040fff]
[ 0.000000] node 0: [mem 0x0000000045043000-0x000000004e984fff]
[ 0.000000] node 0: [mem 0x000000004ffff000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000002a27fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002a27fffff]
[ 0.000000] On node 0 totalpages: 2035999
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4967 pages used for memmap
[ 0.000000] DMA32 zone: 317828 pages, LIFO batch:31
[ 0.000000] Normal zone: 26784 pages used for memmap
[ 0.000000] Normal zone: 1714176 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000005a800000-0x000000005c7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45041000-0x45041fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45042000-0x45042fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4e985000-0x4ea4cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ea4d000-0x4ff2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ff2c000-0x4ff99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ff9a000-0x4fffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x50000000-0x57ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x58000000-0x585fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x58600000-0x5c7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5c800000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfe00ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[ 0.000000] e820: [mem 0x5c800000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8ec562400000 s106520 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2004162
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archvol-root rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7856072K/8143996K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 287924K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28354 entries in 111 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Detected 2700.000 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5426.00 BogoMIPS (lpj=9040000)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.078747] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.079690] Security Framework initialized
[ 0.079691] Yama: becoming mindful.
[ 0.081495] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.082365] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.082401] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.082445] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.082714] CPU: Physical Processor ID: 0
[ 0.082715] CPU: Processor Core ID: 0
[ 0.082722] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.082723] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.082731] mce: CPU supports 8 MCE banks
[ 0.082745] CPU0: Thermal monitoring enabled (TM1)
[ 0.082771] process: using mwait in idle threads
[ 0.082775] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.082776] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.083471] Freeing SMP alternatives memory: 24K
[ 0.088322] smpboot: Max logical packages: 2
[ 0.088334] DMAR: Host address width 39
[ 0.088336] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.088345] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.088347] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.088356] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.088357] DMAR: RMRR base: 0x0000004f49f000 end: 0x0000004f4befff
[ 0.088359] DMAR: RMRR base: 0x0000005a000000 end: 0x0000005c7fffff
[ 0.088362] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.088363] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.088364] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.089969] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.089970] x2apic enabled
[ 0.090011] Switched APIC routing to cluster x2apic.
[ 0.094241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127288] TSC deadline timer enabled
[ 0.127296] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.140036] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.140084] ... version: 4
[ 0.140085] ... bit width: 48
[ 0.140086] ... generic registers: 4
[ 0.140087] ... value mask: 0000ffffffffffff
[ 0.140088] ... max period: 00007fffffffffff
[ 0.140088] ... fixed-purpose events: 3
[ 0.140089] ... event mask: 000000070000000f
[ 0.146678] Hierarchical SRCU implementation.
[ 0.160136] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.166676] smp: Bringing up secondary CPUs ...
[ 0.193376] x86: Booting SMP configuration:
[ 0.193378] .... node #0, CPUs: #1 #2 #3
[ 0.496738] smp: Brought up 1 node, 4 CPUs
[ 0.496738] smpboot: Total of 4 processors activated (21715.53 BogoMIPS)
[ 0.500517] devtmpfs: initialized
[ 0.500517] x86/mm: Memory block size: 128MB
[ 0.501292] PM: Registering ACPI NVS region [mem 0x45041000-0x45041fff] (4096 bytes)
[ 0.501292] PM: Registering ACPI NVS region [mem 0x4ff2c000-0x4ff99fff] (450560 bytes)
[ 0.501292] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.501292] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.501292] pinctrl core: initialized pinctrl subsystem
[ 0.501292] RTC time: 18:08:42, date: 01/14/18
[ 0.501292] NET: Registered protocol family 16
[ 0.501292] cpuidle: using governor ladder
[ 0.501292] cpuidle: using governor menu
[ 0.501292] PCCT header not found.
[ 0.501292] Simple Boot Flag at 0x47 set to 0x1
[ 0.501292] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.501292] ACPI: bus type PCI registered
[ 0.501292] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.503375] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.503396] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.503396] PCI: Using configuration type 1 for base access
[ 0.504753] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.504753] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.504753] ACPI: Added _OSI(Module Device)
[ 0.504753] ACPI: Added _OSI(Processor Device)
[ 0.504753] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.504753] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.504753] ACPI: EC: EC started
[ 0.504753] ACPI: EC: interrupt blocked
[ 0.509497] ACPI: \: Used as first EC
[ 0.509500] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.509502] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.511663] ACPI: Executed 25 blocks of module-level executable AML code
[ 0.531072] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.547775] ACPI: Dynamic OEM Table Load:
[ 0.547888] ACPI: SSDT 0xFFFF8EC558A6F800 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.548201] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.548373] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.550408] ACPI: Dynamic OEM Table Load:
[ 0.550426] ACPI: SSDT 0xFFFF8EC558417400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.550694] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.551068] ACPI: Dynamic OEM Table Load:
[ 0.551082] ACPI: SSDT 0xFFFF8EC5584C5480 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.551304] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.551515] ACPI: Dynamic OEM Table Load:
[ 0.551529] ACPI: SSDT 0xFFFF8EC558A69000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.551742] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.552609] ACPI: Dynamic OEM Table Load:
[ 0.552630] ACPI: SSDT 0xFFFF8EC558BE7000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.553884] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.554246] ACPI: Dynamic OEM Table Load:
[ 0.554261] ACPI: SSDT 0xFFFF8EC558416400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.554582] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.554967] ACPI: Dynamic OEM Table Load:
[ 0.554980] ACPI: SSDT 0xFFFF8EC558415C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.555301] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.557957] ACPI: Interpreter enabled
[ 0.558064] ACPI: (supports S0 S3 S4 S5)
[ 0.558066] ACPI: Using IOAPIC for interrupt routing
[ 0.558145] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.566142] ACPI: Power Resource [PUBS] (on)
[ 0.590670] ACPI: Power Resource [WRST] (on)
[ 0.590935] ACPI: Power Resource [WRST] (on)
[ 0.615904] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.615914] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.616130] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[ 0.616133] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.616135] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.616137] acpi PNP0A08:00: _OSC: platform willing to grant []
[ 0.616139] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.619848] PCI host bridge to bus 0000:00
[ 0.619851] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.619853] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.619855] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.619857] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.619859] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.619860] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.619862] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.619864] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.619865] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.619867] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.619869] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.619870] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.619872] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.619874] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.619875] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.619877] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.619879] pci_bus 0000:00: root bus resource [mem 0x5c800000-0xefffffff window]
[ 0.619881] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.619883] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.619898] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.621417] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.621437] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.621448] pci 0000:00:02.0: reg 0x18: [mem 0x60000000-0x6fffffff 64bit pref]
[ 0.621456] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[ 0.622999] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.623021] pci 0000:00:08.0: reg 0x10: [mem 0xec24a000-0xec24afff 64bit]
[ 0.624556] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.624589] pci 0000:00:14.0: reg 0x10: [mem 0xec220000-0xec22ffff 64bit]
[ 0.624688] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.626331] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.626363] pci 0000:00:14.2: reg 0x10: [mem 0xec24b000-0xec24bfff 64bit]
[ 0.627920] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.627956] pci 0000:00:16.0: reg 0x10: [mem 0xec24c000-0xec24cfff 64bit]
[ 0.628057] pci 0000:00:16.0: PME# supported from D3hot
[ 0.629626] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.629654] pci 0000:00:17.0: reg 0x10: [mem 0xec248000-0xec249fff]
[ 0.629666] pci 0000:00:17.0: reg 0x14: [mem 0xec24f000-0xec24f0ff]
[ 0.629679] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087]
[ 0.629691] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b]
[ 0.629703] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f]
[ 0.629716] pci 0000:00:17.0: reg 0x24: [mem 0xec24d000-0xec24d7ff]
[ 0.629780] pci 0000:00:17.0: PME# supported from D3hot
[ 0.631345] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.631456] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.633034] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.633143] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.634741] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.634851] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.636445] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.638130] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.638151] pci 0000:00:1f.2: reg 0x10: [mem 0xec244000-0xec247fff]
[ 0.639751] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.639790] pci 0000:00:1f.3: reg 0x10: [mem 0xec240000-0xec243fff 64bit]
[ 0.639833] pci 0000:00:1f.3: reg 0x20: [mem 0xec230000-0xec23ffff 64bit]
[ 0.639907] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.641489] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.641547] pci 0000:00:1f.4: reg 0x10: [mem 0xec24e000-0xec24e0ff 64bit]
[ 0.641601] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.643213] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
[ 0.643247] pci 0000:00:1f.6: reg 0x10: [mem 0xec200000-0xec21ffff]
[ 0.643382] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.645091] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.645128] pci 0000:02:00.0: reg 0x14: [mem 0xec100000-0xec100fff]
[ 0.645313] pci 0000:02:00.0: supports D1 D2
[ 0.645314] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.653436] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.653442] pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff]
[ 0.653760] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000
[ 0.653910] pci 0000:04:00.0: reg 0x10: [mem 0xec000000-0xec001fff 64bit]
[ 0.654315] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.663496] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.663503] pci 0000:00:1c.2: bridge window [mem 0xec000000-0xec0fffff]
[ 0.663584] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
[ 0.663592] pci 0000:00:1d.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 0.663601] pci 0000:00:1d.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.666422] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.666516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.666606] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.666699] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.666787] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.666873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.666961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.667048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.668002] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.668092] ACPI: EC: EC stopped
[ 0.668093] ACPI: EC: EC started
[ 0.668094] ACPI: EC: interrupt blocked
[ 0.668447] ACPI: EC: interrupt unblocked
[ 0.668467] ACPI: EC: event unblocked
[ 0.668483] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.668485] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events
[ 0.668521] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.668523] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.668645] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.668645] pci 0000:00:02.0: vgaarb: setting as boot device
[ 0.668645] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.668645] vgaarb: loaded
[ 0.668645] EDAC MC: Ver: 3.0.0
[ 0.668645] Registered efivars operations
[ 0.699729] PCI: Using ACPI for IRQ routing
[ 0.706629] PCI: pci_cache_line_size set to 64 bytes
[ 0.707030] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.707032] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.707033] e820: reserve RAM buffer [mem 0x45041000-0x47ffffff]
[ 0.707035] e820: reserve RAM buffer [mem 0x4e985000-0x4fffffff]
[ 0.707037] e820: reserve RAM buffer [mem 0x2a2800000-0x2a3ffffff]
[ 0.707169] NetLabel: Initializing
[ 0.707170] NetLabel: domain hash size = 128
[ 0.707171] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.707197] NetLabel: unlabeled traffic allowed by default
[ 0.707217] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.707217] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.708818] clocksource: Switched to clocksource hpet
[ 0.721676] VFS: Disk quotas dquot_6.6.0
[ 0.721707] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721820] pnp: PnP ACPI init
[ 0.722133] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.722136] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.722139] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.722142] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.722144] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.722146] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.722149] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.722155] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.722769] system 00:01: [io 0xff00-0xfffe] has been reserved
[ 0.722773] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.723377] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.723379] system 00:02: [io 0xffff] has been reserved
[ 0.723381] system 00:02: [io 0xffff] has been reserved
[ 0.723384] system 00:02: [io 0xffff] has been reserved
[ 0.723386] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.723388] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.723392] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.723599] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.723663] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.723667] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.723702] pnp 00:05: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.723730] pnp 00:06: Plug and Play ACPI device, IDs LEN0072 PNP0f13 (active)
[ 0.723920] system 00:07: [io 0x1800-0x189f] could not be reserved
[ 0.723922] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.723925] system 00:07: [io 0x0880-0x08ff] has been reserved
[ 0.723927] system 00:07: [io 0x0900-0x097f] has been reserved
[ 0.723930] system 00:07: [io 0x0980-0x09ff] has been reserved
[ 0.723932] system 00:07: [io 0x0a00-0x0a7f] has been reserved
[ 0.723934] system 00:07: [io 0x0a80-0x0aff] has been reserved
[ 0.723936] system 00:07: [io 0x0b00-0x0b7f] has been reserved
[ 0.723939] system 00:07: [io 0x0b80-0x0bff] has been reserved
[ 0.723941] system 00:07: [io 0x15e0-0x15ef] has been reserved
[ 0.723943] system 00:07: [io 0x1600-0x167f] could not be reserved
[ 0.723945] system 00:07: [io 0x1640-0x165f] could not be reserved
[ 0.723949] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.723951] system 00:07: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.723954] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.723956] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.723958] system 00:07: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 0.723961] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.723963] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.723966] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.723970] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.726451] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.726454] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.726457] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.726460] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.727544] system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 0.727546] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.727549] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.727551] system 00:09: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.727554] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.727556] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.727559] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.727561] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.727563] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.727566] system 00:09: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.727570] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.728050] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.728052] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.728055] system 00:0a: [mem 0x00100000-0x5c7fffff] could not be reserved
[ 0.728057] system 00:0a: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.728060] system 00:0a: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.728063] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.728290] pnp: PnP ACPI: found 11 devices
[ 0.737354] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.737397] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 06-70] add_size 1000
[ 0.737407] pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.737411] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.737422] pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff]
[ 0.737434] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.737441] pci 0000:00:1c.2: bridge window [mem 0xec000000-0xec0fffff]
[ 0.737453] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
[ 0.737459] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
[ 0.737467] pci 0000:00:1d.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 0.737474] pci 0000:00:1d.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.737485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.737487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.737489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.737491] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.737493] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.737495] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.737497] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.737499] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.737501] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.737503] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.737505] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.737506] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.737508] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.737510] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.737512] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.737514] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.737516] pci_bus 0000:00: resource 20 [mem 0x5c800000-0xefffffff window]
[ 0.737518] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.737520] pci_bus 0000:02: resource 1 [mem 0xec100000-0xec1fffff]
[ 0.737523] pci_bus 0000:04: resource 1 [mem 0xec000000-0xec0fffff]
[ 0.737525] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.737527] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xea0fffff]
[ 0.737528] pci_bus 0000:06: resource 2 [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.737803] NET: Registered protocol family 2
[ 0.738058] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.738281] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.738466] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.738515] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.738569] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.738646] NET: Registered protocol family 1
[ 0.738673] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.739437] PCI: CLS 0 bytes, default 64
[ 0.739491] Unpacking initramfs...
[ 1.167308] Freeing initrd memory: 12284K
[ 1.167361] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.167365] software IO TLB [mem 0x49ffb000-0x4dffb000] (64MB) mapped at [ffff8ec309ffb000-ffff8ec30dffafff]
[ 1.167573] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[ 1.167758] Scanning for low memory corruption every 60 seconds
[ 1.168764] Initialise system trusted keyrings
[ 1.168778] Key type blacklist registered
[ 1.168897] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.170727] zbud: loaded
[ 1.174543] Key type asymmetric registered
[ 1.174614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.174694] io scheduler noop registered
[ 1.174695] io scheduler deadline registered
[ 1.174739] io scheduler cfq registered (default)
[ 1.174741] io scheduler mq-deadline registered
[ 1.174742] io scheduler kyber registered
[ 1.174778] io scheduler bfq registered
[ 1.175910] efifb: probing for efifb
[ 1.175933] efifb: framebuffer at 0x60000000, using 8128k, total 8128k
[ 1.175934] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.175935] efifb: scrolling: redraw
[ 1.175938] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.184368] Console: switching to colour frame buffer device 240x67
[ 1.192569] fb0: EFI VGA frame buffer device
[ 1.192594] intel_idle: MWAIT substates: 0x11142120
[ 1.192597] intel_idle: v0.4.1 model 0x8E
[ 1.192954] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.194181] GHES: HEST is not enabled!
[ 1.194332] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.195863] rtc_cmos 00:03: RTC can wake from S4
[ 1.196388] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.196493] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.196510] intel_pstate: Intel P-state driver initializing
[ 1.197159] intel_pstate: HWP enabled
[ 1.197409] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.197462] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 1.197473] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[ 1.197640] NET: Registered protocol family 10
[ 1.201225] Segment Routing with IPv6
[ 1.201242] NET: Registered protocol family 17
[ 1.201496] RAS: Correctable Errors collector initialized.
[ 1.201533] microcode: sig=0x806e9, pf=0x80, revision=0x70
[ 1.201732] microcode: Microcode Update Driver: v2.2.
[ 1.201741] sched_clock: Marking stable (1201718894, 0)->(1208692046, -6973152)
[ 1.202165] registered taskstats version 1
[ 1.202170] Loading compiled-in X.509 certificates
[ 1.202181] zswap: loaded using pool lzo/zbud
[ 1.204288] Key type big_key registered
[ 1.205176] Magic number: 2:993:139
[ 1.205223] acpi device:10: hash matches
[ 1.205372] rtc_cmos 00:03: setting system clock to 2018-01-14 18:08:43 UTC (1515953323)
[ 1.205865] PM: Hibernation image not present or could not be loaded.
[ 1.206708] Freeing unused kernel memory: 1336K
[ 1.206708] Write protecting the kernel read-only data: 10240k
[ 1.207074] Freeing unused kernel memory: 1536K
[ 1.308024] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.310815] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.310839] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.319822] ACPI: bus type USB registered
[ 1.319907] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 1.319909] usbcore: registered new interface driver usbfs
[ 1.319915] usbcore: registered new interface driver hub
[ 1.319937] usbcore: registered new device driver usb
[ 1.320662] SCSI subsystem initialized
[ 1.321831] libata version 3.00 loaded.
[ 1.321863] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.321872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.323035] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.323039] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.323265] hub 1-0:1.0: USB hub found
[ 1.323284] hub 1-0:1.0: 12 ports detected
[ 1.324415] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.324421] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.324561] hub 2-0:1.0: USB hub found
[ 1.324586] hub 2-0:1.0: 6 ports detected
[ 1.324777] usb: port power management may be unreliable
[ 1.325413] ahci 0000:00:17.0: version 3.0
[ 1.325619] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[ 1.325622] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.325951] scsi host0: ahci
[ 1.326096] scsi host1: ahci
[ 1.326137] ata1: DUMMY
[ 1.326140] ata2: SATA max UDMA/133 abar m2048@0xec24d000 port 0xec24d180 irq 124
[ 1.340606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.641938] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.643906] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.643912] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.644737] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.646364] ata2.00: ATA-9: SanDisk SD8SN8U128G1001, X4133001, max UDMA/133
[ 1.646370] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.648702] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.648709] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.649551] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.651884] ata2.00: configured for UDMA/133
[ 1.652429] scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SN8U1 3001 PQ: 0 ANSI: 5
[ 1.696475] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.696514] sd 1:0:0:0: [sda] Write Protect is off
[ 1.696519] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.696595] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.699933] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.701816] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.703398] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 1.772609] device-mapper: uevent: version 1.0.3
[ 1.772676] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.829754] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.955429] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.968449] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.060109] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[ 2.073727] systemd[1]: Detected architecture x86-64.
[ 2.074230] systemd[1]: Set hostname to <x1c5-archlinux>.
[ 2.182094] systemd[1]: Reached target Login Prompts.
[ 2.182190] systemd[1]: Reached target Remote File Systems.
[ 2.182257] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.182426] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.182766] systemd[1]: Created slice System Slice.
[ 2.182834] systemd[1]: Listening on udev Kernel Socket.
[ 2.182950] systemd[1]: Created slice system-systemd-fsck.slice.
[ 2.183436] clocksource: Switched to clocksource tsc
[ 2.189540] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 2.232199] systemd-journald[213]: Received request to flush runtime journal from PID 1
[ 2.300320] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.300450] ACPI: Sleep Button [SLPB]
[ 2.300746] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 2.300967] ACPI: Lid Switch [LID]
[ 2.301028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.301037] ACPI: Power Button [PWRF]
[ 2.331019] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.370224] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16)
[ 2.376678] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[ 2.380581] ACPI: AC Adapter [AC] (off-line)
[ 2.382084] Bluetooth: Core ver 2.22
[ 2.382097] NET: Registered protocol family 31
[ 2.382098] Bluetooth: HCI device and connection manager initialized
[ 2.382101] Bluetooth: HCI socket layer initialized
[ 2.382103] Bluetooth: L2CAP socket layer initialized
[ 2.382108] Bluetooth: SCO socket layer initialized
[ 2.385579] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.387272] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.387274] ACPI: Thermal Zone [THM0] (31 C)
[ 2.389580] Non-volatile memory driver v1.3
[ 2.391841] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.391842] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.391842] thinkpad_acpi: ThinkPad BIOS N1MET39W (1.24 ), EC unknown
[ 2.391843] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 5th, model 20HRCTO1WW
[ 2.392429] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.394814] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.395025] thinkpad_acpi: radio switch found; radios are enabled
[ 2.395244] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.395245] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.396535] ACPI: Battery Slot [BAT0] (battery present)
[ 2.397565] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.400954] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.404865] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.410205] Linux agpgart interface v0.103
[ 2.411076] Bluetooth: HCI UART driver ver 2.3
[ 2.411077] Bluetooth: HCI UART protocol H4 registered
[ 2.411078] Bluetooth: HCI UART protocol BCSP registered
[ 2.411089] Bluetooth: HCI UART protocol LL registered
[ 2.411090] Bluetooth: HCI UART protocol ATH3K registered
[ 2.411090] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.411112] Bluetooth: HCI UART protocol Intel registered
[ 2.411120] Bluetooth: HCI UART protocol Broadcom registered
[ 2.411120] Bluetooth: HCI UART protocol QCA registered
[ 2.411121] Bluetooth: HCI UART protocol AG6XX registered
[ 2.411121] Bluetooth: HCI UART protocol Marvell registered
[ 2.411438] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.414031] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.436712] pps_core: LinuxPPS API ver. 1 registered
[ 2.436713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.436741] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 2.436944] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.436993] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.438157] PTP clock support registered
[ 2.446096] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.446098] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.446371] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.465395] Intel(R) Wireless WiFi driver for Linux
[ 2.465397] Copyright(c) 2003- 2015 Intel Corporation
[ 2.465738] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[ 2.469457] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
[ 2.469473] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
[ 2.477401] iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
[ 2.493466] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 2.554194] iwlwifi 0000:04:00.0: base HW address: f8:59:71:91:15:22
[ 2.570814] media: Linux media interface: v0.10
[ 2.574254] Linux video capture interface: v2.00
[ 2.579318] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5ce)
[ 2.586677] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.586678] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
[ 2.586679] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.586681] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.586793] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input6
[ 2.586818] usbcore: registered new interface driver uvcvideo
[ 2.586819] USB Video Class driver (1.1.1)
[ 2.597209] usbcore: registered new interface driver btusb
[ 2.601715] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
[ 2.631253] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 2.631519] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.631546] thermal thermal_zone2: failed to read out thermal zone (-5)
[ 2.716577] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 2.804242] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 54:e1:ad:2f:34:04
[ 2.804266] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.804334] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[ 2.804634] i915 0000:00:02.0: enabling device (0006 -> 0007)
[ 2.807904] [drm] Memory usable by graphics device = 4096M
[ 2.807913] checking generic (60000000 7f0000) vs hw (60000000 10000000)
[ 2.807916] fb: switching to inteldrmfb from EFI VGA
[ 2.807986] Console: switching to colour dummy device 80x25
[ 2.808275] [drm] Replacing VGA console driver
[ 2.813584] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.813587] [drm] Driver supports precise vblank timestamp query.
[ 2.818264] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[ 2.819406] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 2.827737] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 2.834471] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.834993] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.849101] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.849105] fbcon: inteldrmfb (fb0) is primary device
[ 2.884529] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
[ 2.885281] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 2.885287] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.885291] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 2.885295] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 2.885298] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 2.885302] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 2.885306] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 2.886710] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 2.905012] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 2.905670] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 2.905696] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 2.905722] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 2.905746] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 2.905769] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 2.905793] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 2.905817] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 2.955282] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 2.955410] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 2.958107] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 2.971705] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 2.977931] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.977931] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.977932] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.977932] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.977932] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.977933] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.982969] AVX2 version of gcm_enc/dec engaged.
[ 2.982970] AES CTR mode by8 optimization enabled
[ 3.039930] intel_rapl: Found RAPL domain package
[ 3.039931] intel_rapl: Found RAPL domain core
[ 3.039932] intel_rapl: Found RAPL domain uncore
[ 3.039933] intel_rapl: Found RAPL domain dram
[ 3.102893] Adding 524284k swap on /dev/mapper/archvol-swap. Priority:-1 extents:1 across:524284k SSFS
[ 3.103288] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[ 3.106568] iTCO_vendor_support: vendor-support=0
[ 3.113773] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.114038] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.114186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.121538] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 3.138307] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 3.163594] random: crng init done
[ 3.778911] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4760]
[ 3.796764] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 3.808823] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
[ 3.808829] psmouse serio1: synaptics: Your touchpad (PNP: LEN0072 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 3.870067] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x400000, board id: 3289, fw id: 2492434
[ 3.870085] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.907562] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input17
[ 3.912368] mousedev: PS/2 mouse device common for all mice
[ 4.010669] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4.021523] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.024954] Console: switching to colour frame buffer device 240x67
[ 4.056275] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.184030] psmouse serio2: trackpoint: failed to get extended button data, assuming 3 buttons
[ 4.243520] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.370417] [drm] RC6 on
[ 4.480407] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.569033] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 7.623447] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x04, buttons: 3/3
[ 7.826156] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
[ 24.026390] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 25.933220] wlp4s0: authenticate with 00:42:5a:0b:c7:ae
[ 25.943978] wlp4s0: send auth to 00:42:5a:0b:c7:ae (try 1/3)
[ 25.956334] wlp4s0: authenticated
[ 25.961638] wlp4s0: associate with 00:42:5a:0b:c7:ae (try 1/3)
[ 25.963178] wlp4s0: RX AssocResp from 00:42:5a:0b:c7:ae (capab=0x411 status=0 aid=4)
[ 25.965252] wlp4s0: associated
[ 25.965284] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 25.980595] wlp4s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 00:42:5a:0b:c7:ae
[ 28.097772] wlp4s0: deauthenticating from 00:42:5a:0b:c7:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[ 40.001754] wlp4s0: authenticate with 00:42:5a:0b:c7:a1
[ 40.010946] wlp4s0: send auth to 00:42:5a:0b:c7:a1 (try 1/3)
[ 40.018751] wlp4s0: authenticated
[ 40.023344] wlp4s0: associate with 00:42:5a:0b:c7:a1 (try 1/3)
[ 40.028334] wlp4s0: RX AssocResp from 00:42:5a:0b:c7:a1 (capab=0x431 status=0 aid=3)
[ 40.030290] wlp4s0: associated
[ 42.084720] wlp4s0: deauthenticating from 00:42:5a:0b:c7:a1 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 49.017580] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 49.024263] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[~]: journalctl -xe
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
Pass -q to turn off this notice.
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is RESULT.
Jan 14 13:08:51 x1c5-archlinux systemd[421]: Reached target Default.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is RESULT.
Jan 14 13:08:51 x1c5-archlinux systemd[421]: Startup finished in 23ms.
-- Subject: User manager start-up is now complete
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The user manager instance for user 1000 has been started. All services queued
-- for starting have been started. Note that other services might still be starting
-- up or be started at any later time.
--
-- Startup of the manager took 23667 microseconds.
Jan 14 13:08:51 x1c5-archlinux systemd[421]: Started D-Bus User Message Bus.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is RESULT.
Jan 14 13:08:51 x1c5-archlinux dbus-daemon[440]: [session uid=1000 pid=440] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.2' (uid=1000 pid=446 comm="nm-
Jan 14 13:08:51 x1c5-archlinux systemd[421]: Starting Accessibility services bus...
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has begun starting up.
Jan 14 13:08:51 x1c5-archlinux dbus-daemon[440]: [session uid=1000 pid=440] Successfully activated service 'org.a11y.Bus'
Jan 14 13:08:51 x1c5-archlinux systemd[421]: Started Accessibility services bus.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit UNIT has finished starting up.
--
-- The start-up result is RESULT.
Jan 14 13:08:51 x1c5-archlinux at-spi-bus-launcher[456]: dbus-daemon[461]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=446 comm="nm-applet ")
Jan 14 13:08:51 x1c5-archlinux at-spi-bus-launcher[456]: dbus-daemon[461]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 14 13:08:51 x1c5-archlinux at-spi-bus-launcher[456]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 14 13:10:28 x1c5-archlinux konsole[444]: klauncher not running... launching kdeinit
Jan 14 13:10:28 x1c5-archlinux klauncher[647]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Jan 14 13:11:44 x1c5-archlinux konsole[444]: Error loading text-to-speech plug-in "speechd"
[~]: I'm not sure what you're asking about for the authentication dialog. There is no dialogue that pops up after I click on the network name in nw-applet.
Offline
#6 2018-01-14 20:03:04
- robg
- Member
- Registered: 2015-03-05
- Posts: 225
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Apparently something goes wrong here:
[ 42.084720] wlp4s0: deauthenticating from 00:42:5a:0b:c7:a1 by local choice (Reason: 3=DEAUTH_LEAVING)This would suggest some sort of issue with the connection details you provide to NetworkManager.
What I meant with my second question was: If you (temporarily) remove your wpa_supplicant.conf file and select your university network in the dropdown list of nm-applet, a login mask will be presented to you. There you fill in your details such as identity, password, e.t.c., select the connection type (PEAP?), and so on. Please provide a screenshot of that with your details filled in (again, just black out the sensitive stuff...). Also, try connecting this way and if doesn't work, please post again the output of `dmesg`.
Offline
#7 2018-01-14 21:35:18
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Again, the same thing happened even after I removed the wpa_supplicant.conf file.
[~]: cd /etc/wpa_supplicant/
[/etc/wpa_supplicant]: ls
[/etc/wpa_supplicant]: dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.12-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Wed Nov 8 11:54:06 CET 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archvol-root rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000045040fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000045041000-0x0000000045041fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000045042000-0x0000000045042fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000045043000-0x000000004e984fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000004e985000-0x000000004ea4cfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000004ea4d000-0x000000004ff2bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000004ff2c000-0x000000004ff99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000004ff9a000-0x000000004fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000004ffff000-0x000000004fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000050000000-0x0000000057ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000058600000-0x000000005c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002a27fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by Lenovo
[ 0.000000] efi: SMBIOS=0x4f0e3000 SMBIOS 3.0=0x4f0e0000 ACPI=0x4fffe000 ACPI 2.0=0x4fffe014 ESRT=0x4ef58000 MEMATTR=0x49827298
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 20HRCTO1WW/20HRCTO1WW, BIOS N1MET39W (1.24 ) 09/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x2a2800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 0060000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 005C000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 005A000000 mask 7FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x50000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000004ef58000 to 0x000000004ef58088.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff914540097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x28fd64000, 0x28fd64fff] PGTABLE
[ 0.000000] BRK [0x28fd65000, 0x28fd65fff] PGTABLE
[ 0.000000] BRK [0x28fd66000, 0x28fd66fff] PGTABLE
[ 0.000000] BRK [0x28fd67000, 0x28fd67fff] PGTABLE
[ 0.000000] BRK [0x28fd68000, 0x28fd68fff] PGTABLE
[ 0.000000] BRK [0x28fd69000, 0x28fd69fff] PGTABLE
[ 0.000000] BRK [0x28fd6a000, 0x28fd6afff] PGTABLE
[ 0.000000] BRK [0x28fd6b000, 0x28fd6bfff] PGTABLE
[ 0.000000] BRK [0x28fd6c000, 0x28fd6cfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x367f1000-0x373effff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000004FFFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000004FFC2188 0000FC (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x000000004FFF5000 0000F4 (v05 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x000000004FFD0000 020B92 (v02 LENOVO SKL 00000000 INTL 20160527)
[ 0.000000] ACPI: FACS 0x000000004FF3D000 000040
[ 0.000000] ACPI: SSDT 0x000000004FFFC000 0003CC (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
[ 0.000000] ACPI: TPM2 0x000000004FFFB000 000034 (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x000000004FF53000 000042 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFF7000 003235 (v02 LENOVO SaSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFF6000 0005B6 (v02 LENOVO PerfTune 00001000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x000000004FFF4000 000038 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x000000004FFF3000 0000BC (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x000000004FFF2000 00003C (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: ECDT 0x000000004FFF1000 000053 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFCE000 001627 (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x000000004FFCD000 000028 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x000000004FFCC000 00004A (v02 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFCA000 0017AE (v02 LENOVO CpuSsdt 00003000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC9000 00056D (v02 LENOVO CtdpB 00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC8000 000678 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
[ 0.000000] ACPI: WSMT 0x000000004FFC7000 000028 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x000000004FFC6000 000141 (v02 LENOVO HdaDsp 00000000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x000000004FFC5000 00050D (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x000000004FFC4000 000034 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DBG2 0x000000004FFC3000 000054 (v00 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x000000004FFFD000 000055 (v03 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: DMAR 0x000000004FFC1000 0000A8 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: ASF! 0x000000004FFC0000 0000A0 (v32 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: FPDT 0x000000004FFBF000 000044 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: BGRT 0x000000004FFBE000 000038 (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x000000004FF3A000 00013E (v01 LENOVO TP-N1M 00001240 PTEC 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002a27fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2a27fb000-0x2a27fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000002a27fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000045040fff]
[ 0.000000] node 0: [mem 0x0000000045043000-0x000000004e984fff]
[ 0.000000] node 0: [mem 0x000000004ffff000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000002a27fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002a27fffff]
[ 0.000000] On node 0 totalpages: 2035999
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4967 pages used for memmap
[ 0.000000] DMA32 zone: 317828 pages, LIFO batch:31
[ 0.000000] Normal zone: 26784 pages used for memmap
[ 0.000000] Normal zone: 1714176 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000005a800000-0x000000005c7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45041000-0x45041fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45042000-0x45042fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4e985000-0x4ea4cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ea4d000-0x4ff2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ff2c000-0x4ff99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4ff9a000-0x4fffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x50000000-0x57ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x58000000-0x585fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x58600000-0x5c7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5c800000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfe00ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[ 0.000000] e820: [mem 0x5c800000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9147e2400000 s106520 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2004162
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/archvol-root rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7856072K/8143996K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 287924K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28354 entries in 111 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Detected 2700.000 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5426.00 BogoMIPS (lpj=9040000)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.075078] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.076051] Security Framework initialized
[ 0.076052] Yama: becoming mindful.
[ 0.077836] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.078717] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.078752] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.078781] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.079052] CPU: Physical Processor ID: 0
[ 0.079053] CPU: Processor Core ID: 0
[ 0.079060] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.079061] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.079069] mce: CPU supports 8 MCE banks
[ 0.079083] CPU0: Thermal monitoring enabled (TM1)
[ 0.079109] process: using mwait in idle threads
[ 0.079113] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.079114] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.079241] Freeing SMP alternatives memory: 24K
[ 0.084189] smpboot: Max logical packages: 2
[ 0.084201] DMAR: Host address width 39
[ 0.084202] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.084212] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.084214] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.084223] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.084225] DMAR: RMRR base: 0x0000004f49f000 end: 0x0000004f4befff
[ 0.084226] DMAR: RMRR base: 0x0000005a000000 end: 0x0000005c7fffff
[ 0.084229] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.084230] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.084231] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.085798] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.085800] x2apic enabled
[ 0.085813] Switched APIC routing to cluster x2apic.
[ 0.089999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119807] TSC deadline timer enabled
[ 0.119815] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.130038] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.130086] ... version: 4
[ 0.130087] ... bit width: 48
[ 0.130087] ... generic registers: 4
[ 0.130089] ... value mask: 0000ffffffffffff
[ 0.130089] ... max period: 00007fffffffffff
[ 0.130090] ... fixed-purpose events: 3
[ 0.130091] ... event mask: 000000070000000f
[ 0.136678] Hierarchical SRCU implementation.
[ 0.150132] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.156676] smp: Bringing up secondary CPUs ...
[ 0.183378] x86: Booting SMP configuration:
[ 0.183380] .... node #0, CPUs: #1 #2 #3
[ 0.486744] smp: Brought up 1 node, 4 CPUs
[ 0.486744] smpboot: Total of 4 processors activated (21716.57 BogoMIPS)
[ 0.490513] devtmpfs: initialized
[ 0.490513] x86/mm: Memory block size: 128MB
[ 0.491300] PM: Registering ACPI NVS region [mem 0x45041000-0x45041fff] (4096 bytes)
[ 0.491300] PM: Registering ACPI NVS region [mem 0x4ff2c000-0x4ff99fff] (450560 bytes)
[ 0.491300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.491300] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.491300] pinctrl core: initialized pinctrl subsystem
[ 0.491300] RTC time: 21:29:47, date: 01/14/18
[ 0.491300] NET: Registered protocol family 16
[ 0.491300] cpuidle: using governor ladder
[ 0.491300] cpuidle: using governor menu
[ 0.491300] PCCT header not found.
[ 0.491300] Simple Boot Flag at 0x47 set to 0x1
[ 0.491300] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.491300] ACPI: bus type PCI registered
[ 0.491300] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.493372] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.493392] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.493392] PCI: Using configuration type 1 for base access
[ 0.494773] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.494773] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.494773] ACPI: Added _OSI(Module Device)
[ 0.494773] ACPI: Added _OSI(Processor Device)
[ 0.494773] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.494773] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.494773] ACPI: EC: EC started
[ 0.494773] ACPI: EC: interrupt blocked
[ 0.499503] ACPI: \: Used as first EC
[ 0.499507] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.499509] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.501566] ACPI: Executed 25 blocks of module-level executable AML code
[ 0.520276] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.536660] ACPI: Dynamic OEM Table Load:
[ 0.536778] ACPI: SSDT 0xFFFF9147D8A6B800 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.537091] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.537256] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.539216] ACPI: Dynamic OEM Table Load:
[ 0.539235] ACPI: SSDT 0xFFFF9147D8417800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.539502] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.539856] ACPI: Dynamic OEM Table Load:
[ 0.539870] ACPI: SSDT 0xFFFF9147D84C5480 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.540097] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.540298] ACPI: Dynamic OEM Table Load:
[ 0.540313] ACPI: SSDT 0xFFFF9147D8A6D000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.540525] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.541362] ACPI: Dynamic OEM Table Load:
[ 0.541382] ACPI: SSDT 0xFFFF9147D8BE6000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.542553] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.542866] ACPI: Dynamic OEM Table Load:
[ 0.542880] ACPI: SSDT 0xFFFF9147D8416800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.543173] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.543510] ACPI: Dynamic OEM Table Load:
[ 0.543523] ACPI: SSDT 0xFFFF9147D8414C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.543817] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.546155] ACPI: Interpreter enabled
[ 0.546247] ACPI: (supports S0 S3 S4 S5)
[ 0.546248] ACPI: Using IOAPIC for interrupt routing
[ 0.546317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.553469] ACPI: Power Resource [PUBS] (on)
[ 0.577181] ACPI: Power Resource [WRST] (on)
[ 0.577442] ACPI: Power Resource [WRST] (on)
[ 0.601742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.601763] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.601978] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[ 0.601980] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.601983] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.601985] acpi PNP0A08:00: _OSC: platform willing to grant []
[ 0.601986] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.605524] PCI host bridge to bus 0000:00
[ 0.605528] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.605530] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.605532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.605534] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.605536] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.605537] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.605539] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.605541] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.605542] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.605544] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.605546] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.605547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.605549] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.605551] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.605552] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.605554] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.605556] pci_bus 0000:00: root bus resource [mem 0x5c800000-0xefffffff window]
[ 0.605557] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.605560] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.605575] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.607009] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.607030] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.607041] pci 0000:00:02.0: reg 0x18: [mem 0x60000000-0x6fffffff 64bit pref]
[ 0.607048] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[ 0.608515] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.608538] pci 0000:00:08.0: reg 0x10: [mem 0xec24a000-0xec24afff 64bit]
[ 0.609989] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.610026] pci 0000:00:14.0: reg 0x10: [mem 0xec220000-0xec22ffff 64bit]
[ 0.610125] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.611689] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.611721] pci 0000:00:14.2: reg 0x10: [mem 0xec24b000-0xec24bfff 64bit]
[ 0.613195] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.613231] pci 0000:00:16.0: reg 0x10: [mem 0xec24c000-0xec24cfff 64bit]
[ 0.613331] pci 0000:00:16.0: PME# supported from D3hot
[ 0.614828] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.614856] pci 0000:00:17.0: reg 0x10: [mem 0xec248000-0xec249fff]
[ 0.614869] pci 0000:00:17.0: reg 0x14: [mem 0xec24f000-0xec24f0ff]
[ 0.614881] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087]
[ 0.614894] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b]
[ 0.614906] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f]
[ 0.614919] pci 0000:00:17.0: reg 0x24: [mem 0xec24d000-0xec24d7ff]
[ 0.614983] pci 0000:00:17.0: PME# supported from D3hot
[ 0.616461] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.616571] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.618070] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.618179] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.619697] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.619806] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.621326] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.622924] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.622945] pci 0000:00:1f.2: reg 0x10: [mem 0xec244000-0xec247fff]
[ 0.624468] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.624506] pci 0000:00:1f.3: reg 0x10: [mem 0xec240000-0xec243fff 64bit]
[ 0.624550] pci 0000:00:1f.3: reg 0x20: [mem 0xec230000-0xec23ffff 64bit]
[ 0.624622] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.626119] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.626178] pci 0000:00:1f.4: reg 0x10: [mem 0xec24e000-0xec24e0ff 64bit]
[ 0.626232] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.627768] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
[ 0.627802] pci 0000:00:1f.6: reg 0x10: [mem 0xec200000-0xec21ffff]
[ 0.627932] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.629541] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.629580] pci 0000:02:00.0: reg 0x14: [mem 0xec100000-0xec100fff]
[ 0.629768] pci 0000:02:00.0: supports D1 D2
[ 0.629770] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.636770] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.636776] pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff]
[ 0.637260] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000
[ 0.637365] pci 0000:04:00.0: reg 0x10: [mem 0xec000000-0xec001fff 64bit]
[ 0.637939] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.647000] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.647007] pci 0000:00:1c.2: bridge window [mem 0xec000000-0xec0fffff]
[ 0.647090] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
[ 0.647099] pci 0000:00:1d.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 0.647108] pci 0000:00:1d.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.650010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650113] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.650209] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650304] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650397] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650491] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650584] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.650677] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.651690] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.651779] ACPI: EC: EC stopped
[ 0.651781] ACPI: EC: EC started
[ 0.651782] ACPI: EC: interrupt blocked
[ 0.652165] ACPI: EC: interrupt unblocked
[ 0.652185] ACPI: EC: event unblocked
[ 0.652201] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.652204] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events
[ 0.652243] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.652245] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.652379] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.652379] pci 0000:00:02.0: vgaarb: setting as boot device
[ 0.652379] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.652379] vgaarb: loaded
[ 0.652379] EDAC MC: Ver: 3.0.0
[ 0.652379] Registered efivars operations
[ 0.684111] PCI: Using ACPI for IRQ routing
[ 0.691139] PCI: pci_cache_line_size set to 64 bytes
[ 0.691947] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.691949] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.691951] e820: reserve RAM buffer [mem 0x45041000-0x47ffffff]
[ 0.691953] e820: reserve RAM buffer [mem 0x4e985000-0x4fffffff]
[ 0.691955] e820: reserve RAM buffer [mem 0x2a2800000-0x2a3ffffff]
[ 0.692098] NetLabel: Initializing
[ 0.692099] NetLabel: domain hash size = 128
[ 0.692100] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.692129] NetLabel: unlabeled traffic allowed by default
[ 0.692151] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.692151] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.693370] clocksource: Switched to clocksource hpet
[ 0.709735] VFS: Disk quotas dquot_6.6.0
[ 0.709769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.709889] pnp: PnP ACPI init
[ 0.710265] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.710268] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.710271] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.710274] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.710277] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.710279] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.710281] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.710288] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.710926] system 00:01: [io 0xff00-0xfffe] has been reserved
[ 0.710931] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.711527] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.711530] system 00:02: [io 0xffff] has been reserved
[ 0.711532] system 00:02: [io 0xffff] has been reserved
[ 0.711535] system 00:02: [io 0xffff] has been reserved
[ 0.711537] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.711540] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.711544] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.711755] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.711827] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.711831] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.711870] pnp 00:05: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.711901] pnp 00:06: Plug and Play ACPI device, IDs LEN0072 PNP0f13 (active)
[ 0.712101] system 00:07: [io 0x1800-0x189f] could not be reserved
[ 0.712104] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.712107] system 00:07: [io 0x0880-0x08ff] has been reserved
[ 0.712109] system 00:07: [io 0x0900-0x097f] has been reserved
[ 0.712112] system 00:07: [io 0x0980-0x09ff] has been reserved
[ 0.712114] system 00:07: [io 0x0a00-0x0a7f] has been reserved
[ 0.712116] system 00:07: [io 0x0a80-0x0aff] has been reserved
[ 0.712119] system 00:07: [io 0x0b00-0x0b7f] has been reserved
[ 0.712121] system 00:07: [io 0x0b80-0x0bff] has been reserved
[ 0.712124] system 00:07: [io 0x15e0-0x15ef] has been reserved
[ 0.712126] system 00:07: [io 0x1600-0x167f] could not be reserved
[ 0.712129] system 00:07: [io 0x1640-0x165f] could not be reserved
[ 0.712133] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.712135] system 00:07: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.712138] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.712141] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.712143] system 00:07: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 0.712146] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.712149] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.712152] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.712156] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.714792] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.714795] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.714797] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.714802] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.715905] system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 0.715907] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.715910] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.715913] system 00:09: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.715915] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.715918] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.715920] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.715923] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.715926] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.715929] system 00:09: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.715933] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.716450] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.716453] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.716456] system 00:0a: [mem 0x00100000-0x5c7fffff] could not be reserved
[ 0.716459] system 00:0a: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.716462] system 00:0a: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.716466] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.716746] pnp: PnP ACPI: found 11 devices
[ 0.726000] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.726045] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 06-70] add_size 1000
[ 0.726056] pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.726061] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.726072] pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff]
[ 0.726084] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.726093] pci 0000:00:1c.2: bridge window [mem 0xec000000-0xec0fffff]
[ 0.726105] pci 0000:00:1d.0: PCI bridge to [bus 06-70]
[ 0.726112] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
[ 0.726120] pci 0000:00:1d.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 0.726127] pci 0000:00:1d.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.726138] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.726141] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.726143] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.726145] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.726147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.726149] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.726152] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.726154] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.726156] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.726158] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.726160] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.726162] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.726164] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.726166] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.726168] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.726170] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.726173] pci_bus 0000:00: resource 20 [mem 0x5c800000-0xefffffff window]
[ 0.726175] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[ 0.726177] pci_bus 0000:02: resource 1 [mem 0xec100000-0xec1fffff]
[ 0.726180] pci_bus 0000:04: resource 1 [mem 0xec000000-0xec0fffff]
[ 0.726182] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.726184] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xea0fffff]
[ 0.726187] pci_bus 0000:06: resource 2 [mem 0x70000000-0xb9ffffff 64bit pref]
[ 0.726487] NET: Registered protocol family 2
[ 0.726797] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.727034] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.727231] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.727285] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727342] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727427] NET: Registered protocol family 1
[ 0.727457] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.728440] PCI: CLS 0 bytes, default 64
[ 0.728500] Unpacking initramfs...
[ 1.174728] Freeing initrd memory: 12284K
[ 1.174781] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.174785] software IO TLB [mem 0x49ffb000-0x4dffb000] (64MB) mapped at [ffff914589ffb000-ffff91458dffafff]
[ 1.174977] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[ 1.175165] Scanning for low memory corruption every 60 seconds
[ 1.176098] Initialise system trusted keyrings
[ 1.176112] Key type blacklist registered
[ 1.176229] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.177917] zbud: loaded
[ 1.181542] Key type asymmetric registered
[ 1.181595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.181684] io scheduler noop registered
[ 1.181685] io scheduler deadline registered
[ 1.181725] io scheduler cfq registered (default)
[ 1.181726] io scheduler mq-deadline registered
[ 1.181727] io scheduler kyber registered
[ 1.181762] io scheduler bfq registered
[ 1.182779] efifb: probing for efifb
[ 1.182800] efifb: framebuffer at 0x60000000, using 8128k, total 8128k
[ 1.182802] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.182803] efifb: scrolling: redraw
[ 1.182805] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.190559] Console: switching to colour frame buffer device 240x67
[ 1.198096] fb0: EFI VGA frame buffer device
[ 1.198106] intel_idle: MWAIT substates: 0x11142120
[ 1.198108] intel_idle: v0.4.1 model 0x8E
[ 1.198444] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.199545] GHES: HEST is not enabled!
[ 1.199687] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.201080] rtc_cmos 00:03: RTC can wake from S4
[ 1.201575] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.201696] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.201711] intel_pstate: Intel P-state driver initializing
[ 1.202332] intel_pstate: HWP enabled
[ 1.202576] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.202643] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 1.202654] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[ 1.202822] NET: Registered protocol family 10
[ 1.206054] Segment Routing with IPv6
[ 1.206072] NET: Registered protocol family 17
[ 1.206430] RAS: Correctable Errors collector initialized.
[ 1.206497] microcode: sig=0x806e9, pf=0x80, revision=0x70
[ 1.206587] microcode: Microcode Update Driver: v2.2.
[ 1.206606] sched_clock: Marking stable (1206584523, 0)->(1217235787, -10651264)
[ 1.206954] registered taskstats version 1
[ 1.206959] Loading compiled-in X.509 certificates
[ 1.206974] zswap: loaded using pool lzo/zbud
[ 1.208895] Key type big_key registered
[ 1.209968] Magic number: 2:176:500
[ 1.210225] rtc_cmos 00:03: setting system clock to 2018-01-14 21:29:48 UTC (1515965388)
[ 1.210751] PM: Hibernation image not present or could not be loaded.
[ 1.211648] Freeing unused kernel memory: 1336K
[ 1.211648] Write protecting the kernel read-only data: 10240k
[ 1.212008] Freeing unused kernel memory: 1536K
[ 1.313956] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.317415] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.317440] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.326008] ACPI: bus type USB registered
[ 1.326010] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 1.326025] usbcore: registered new interface driver usbfs
[ 1.326031] usbcore: registered new interface driver hub
[ 1.326051] usbcore: registered new device driver usb
[ 1.326816] SCSI subsystem initialized
[ 1.327692] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.327698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.328031] libata version 3.00 loaded.
[ 1.328859] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.328863] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.329070] hub 1-0:1.0: USB hub found
[ 1.329090] hub 1-0:1.0: 12 ports detected
[ 1.330024] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.330028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.330155] hub 2-0:1.0: USB hub found
[ 1.330180] hub 2-0:1.0: 6 ports detected
[ 1.330321] usb: port power management may be unreliable
[ 1.330780] ahci 0000:00:17.0: version 3.0
[ 1.330987] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[ 1.330989] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.331318] scsi host0: ahci
[ 1.331410] scsi host1: ahci
[ 1.331444] ata1: DUMMY
[ 1.331447] ata2: SATA max UDMA/133 abar m2048@0xec24d000 port 0xec24d180 irq 124
[ 1.345516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.645577] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.647465] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.647472] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.648297] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.649954] ata2.00: ATA-9: SanDisk SD8SN8U128G1001, X4133001, max UDMA/133
[ 1.649960] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.652364] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.652372] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.653207] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.655577] ata2.00: configured for UDMA/133
[ 1.656158] scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SN8U1 3001 PQ: 0 ANSI: 5
[ 1.695080] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.695169] sd 1:0:0:0: [sda] Write Protect is off
[ 1.695175] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.695282] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.698735] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.699935] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.703442] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 1.775060] device-mapper: uevent: version 1.0.3
[ 1.775156] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.841288] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 1.955867] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.962244] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.006713] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[ 2.067005] systemd[1]: Detected architecture x86-64.
[ 2.067374] systemd[1]: Set hostname to <x1c5-archlinux>.
[ 2.173631] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.173715] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.174037] systemd[1]: Created slice System Slice.
[ 2.174824] systemd[1]: Listening on Process Core Dump Socket.
[ 2.174886] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.175328] systemd[1]: Mounting Huge Pages File System...
[ 2.175407] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.189354] clocksource: Switched to clocksource tsc
[ 2.190607] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 2.231886] systemd-journald[213]: Received request to flush runtime journal from PID 1
[ 2.386686] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[ 2.481418] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.482075] ACPI: Sleep Button [SLPB]
[ 2.482414] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 2.482661] ACPI: Lid Switch [LID]
[ 2.482968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.482983] ACPI: Power Button [PWRF]
[ 2.520596] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.528992] Bluetooth: Core ver 2.22
[ 2.529006] NET: Registered protocol family 31
[ 2.529006] Bluetooth: HCI device and connection manager initialized
[ 2.529010] Bluetooth: HCI socket layer initialized
[ 2.529012] Bluetooth: L2CAP socket layer initialized
[ 2.529016] Bluetooth: SCO socket layer initialized
[ 2.533875] ACPI: AC Adapter [AC] (off-line)
[ 2.548008] Bluetooth: HCI UART driver ver 2.3
[ 2.548010] Bluetooth: HCI UART protocol H4 registered
[ 2.548011] Bluetooth: HCI UART protocol BCSP registered
[ 2.548025] Bluetooth: HCI UART protocol LL registered
[ 2.548025] Bluetooth: HCI UART protocol ATH3K registered
[ 2.548026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.548047] Bluetooth: HCI UART protocol Intel registered
[ 2.548059] Bluetooth: HCI UART protocol Broadcom registered
[ 2.548059] Bluetooth: HCI UART protocol QCA registered
[ 2.548060] Bluetooth: HCI UART protocol AG6XX registered
[ 2.548061] Bluetooth: HCI UART protocol Marvell registered
[ 2.550966] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.551519] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.552766] thermal LNXTHERM:00: registered as thermal_zone1
[ 2.552767] ACPI: Thermal Zone [THM0] (41 C)
[ 2.553107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.554390] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.556712] Non-volatile memory driver v1.3
[ 2.559354] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.559355] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.559356] thinkpad_acpi: ThinkPad BIOS N1MET39W (1.24 ), EC unknown
[ 2.559357] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 5th, model 20HRCTO1WW
[ 2.559499] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.559698] thinkpad_acpi: radio switch found; radios are enabled
[ 2.559912] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.559913] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.560637] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16)
[ 2.561302] ACPI: Battery Slot [BAT0] (battery present)
[ 2.562508] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.566061] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.571310] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[ 2.571471] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.571523] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.573973] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.574703] pps_core: LinuxPPS API ver. 1 registered
[ 2.574704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.579754] PTP clock support registered
[ 2.579871] Linux agpgart interface v0.103
[ 2.584033] media: Linux media interface: v0.10
[ 2.585059] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.585060] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.585341] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.587888] Linux video capture interface: v2.00
[ 2.592272] Intel(R) Wireless WiFi driver for Linux
[ 2.592274] Copyright(c) 2003- 2015 Intel Corporation
[ 2.592663] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[ 2.597392] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-33.ucode failed with error -2
[ 2.597409] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-32.ucode failed with error -2
[ 2.598752] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b5ce)
[ 2.606158] iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
[ 2.606162] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.606164] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
[ 2.606165] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.606166] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.606253] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input6
[ 2.606279] usbcore: registered new interface driver uvcvideo
[ 2.606280] USB Video Class driver (1.1.1)
[ 2.614477] usbcore: registered new interface driver btusb
[ 2.624139] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
[ 2.632585] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 2.694260] iwlwifi 0000:04:00.0: base HW address: f8:59:71:91:15:22
[ 2.770458] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 2.770641] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.770651] thermal thermal_zone2: failed to read out thermal zone (-5)
[ 2.852915] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 2.937359] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 54:e1:ad:2f:34:04
[ 2.937379] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 2.937445] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[ 2.938261] i915 0000:00:02.0: enabling device (0006 -> 0007)
[ 2.942257] [drm] Memory usable by graphics device = 4096M
[ 2.942264] checking generic (60000000 7f0000) vs hw (60000000 10000000)
[ 2.942267] fb: switching to inteldrmfb from EFI VGA
[ 2.942328] Console: switching to colour dummy device 80x25
[ 2.942569] [drm] Replacing VGA console driver
[ 2.948904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.948907] [drm] Driver supports precise vblank timestamp query.
[ 2.953016] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[ 2.954155] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 2.971943] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 2.978812] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.979456] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.983592] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.996789] fbcon: inteldrmfb (fb0) is primary device
[ 3.026280] snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
[ 3.026970] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 3.026972] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.026973] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 3.026974] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.026974] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.026976] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 3.026977] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 3.028208] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.041455] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 3.042011] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 3.042033] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 3.042047] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 3.042061] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 3.042074] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 3.042088] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 3.042102] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.148480] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 3.150198] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 3.153768] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 3.179667] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 3.232729] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.232732] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.232735] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.232736] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.232738] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.232740] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.267054] AVX2 version of gcm_enc/dec engaged.
[ 3.267055] AES CTR mode by8 optimization enabled
[ 3.318017] intel_rapl: Found RAPL domain package
[ 3.318019] intel_rapl: Found RAPL domain core
[ 3.318019] intel_rapl: Found RAPL domain uncore
[ 3.318020] intel_rapl: Found RAPL domain dram
[ 3.351230] iTCO_vendor_support: vendor-support=0
[ 3.352061] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.352215] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 3.364266] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.368660] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 3.372108] Adding 524284k swap on /dev/mapper/archvol-swap. Priority:-1 extents:1 across:524284k SSFS
[ 3.383206] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[ 3.393617] random: crng init done
[ 3.476852] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 4.013244] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4760]
[ 4.044857] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1094..]
[ 4.044874] psmouse serio1: synaptics: Your touchpad (PNP: LEN0072 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 4.115880] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x400000, board id: 3289, fw id: 2492434
[ 4.115907] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.152731] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input17
[ 4.156288] mousedev: PS/2 mouse device common for all mice
[ 4.185417] Console: switching to colour frame buffer device 240x67
[ 4.205212] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.207967] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4.350396] [drm] RC6 on
[ 4.420357] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[ 4.425657] psmouse serio2: trackpoint: failed to get extended button data, assuming 3 buttons
[ 4.426334] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.647269] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.885475] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 4.986586] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 7.032573] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.032765] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 7.856691] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x04, buttons: 3/3
[ 8.060524] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
[ 53.033528] e1000e: enp0s31f6 NIC Link is Down
[ 67.536588] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 69.206093] wlp4s0: authenticate with 00:42:5a:0b:c7:ae
[ 69.216394] wlp4s0: send auth to 00:42:5a:0b:c7:ae (try 1/3)
[ 69.221721] wlp4s0: authenticated
[ 69.226676] wlp4s0: associate with 00:42:5a:0b:c7:ae (try 1/3)
[ 69.228046] wlp4s0: RX AssocResp from 00:42:5a:0b:c7:ae (capab=0x411 status=0 aid=2)
[ 69.229845] wlp4s0: associated
[ 69.229874] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 69.293716] wlp4s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 00:42:5a:0b:c7:ae
[ 71.284774] wlp4s0: deauthenticating from 00:42:5a:0b:c7:ae by local choice (Reason: 3=DEAUTH_LEAVING)
[ 83.472277] wlp4s0: authenticate with 00:42:5a:0b:f9:4e
[ 83.480346] wlp4s0: send auth to 00:42:5a:0b:f9:4e (try 1/3)
[ 83.485818] wlp4s0: authenticated
[ 83.486668] wlp4s0: associate with 00:42:5a:0b:f9:4e (try 1/3)
[ 83.488043] wlp4s0: RX AssocResp from 00:42:5a:0b:f9:4e (capab=0x411 status=0 aid=1)
[ 83.497221] wlp4s0: associated
[ 83.498822] wlp4s0: Limiting TX power to 24 (24 - 0) dBm as advertised by 00:42:5a:0b:f9:4e
[ 85.540903] wlp4s0: deauthenticating from 00:42:5a:0b:f9:4e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 93.011262] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 93.017293] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[/etc/wpa_supplicant]: Offline
#8 2018-01-14 23:20:32
- Steef435
- Member
- Registered: 2013-08-29
- Posts: 577
- Website
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Hi,
Just so we understand correctly: if you invoke wpa_supplicant manually you can connect to this eduroam network and it's all good? So your wpa_supplicant configuration is working?
From looking at the logs it looks like NetworkManager decided to hang up. Long shot: is your ethernet cable connected? Then NM will probably drop wifi in favour of ethernet. Try connecting with your ethernet cable disconnected. (What is managing the ethernet connection? Using different network managers in one system is asking for trouble)
If that's not the case, maybe you could try connecting using nmcli first (the default CLI). I can imagine it will provide some more useful feedback messages.
Is there a specific reason for you to want to use NetworkManager? You've already got your wpa_supplicant config working, it's very easy to create a netctl profile and use netctl-auto to automatically connect to wifi.
Offline
#9 2018-01-19 16:21:53
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Apologies for a wait, I've been too busy to fix my Arch.
Ethernet cable is not connected.
If I understand this correctly, nmcli does not support eduroam, the service my university uses. I looked at the nmcli wiki article but I didn't see anything that would help.
I was using NetworkManager by a friend's recommendation. We both go to the same university, both use Arch, and both use the same wireless network. However, he has had no issues, so I must be doing something wrong.
Offline
#10 2018-01-19 22:25:41
- robg
- Member
- Registered: 2015-03-05
- Posts: 225
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Deditionis wrote:
If I understand this correctly, nmcli does not support eduroam, the service my university uses. I looked at the nmcli wiki article but I didn't see anything that would help.
It is not stated that this connection type is not supported. The fact that it works for your friend is proof enough to the contrary.
Can you confirm that you use the same authentication method as your friend does? Once again I would like to ask you to provide a screenshot of the authentication dialog.
Also, just to rule out another common mistake: Can you confirm that NetworkManager.service is the only network-related unit file that you have enabled?
Offline
#11 2018-01-25 01:54:30
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
My friend no longer uses Arch Linux, as he uninstalled it in favor of Windows (for university purposes) and did not dual boot. He states that he thinks he used NetworkManager.
There is no authentication dialog, at least none that I see. When I click on the icon in the lower right of my screen to get to the connection screen, and then click on my network name (eduroam), the icon turns to a loading symbol for about 10 seconds then returns to the unconnected state. This is my enabled services.
[~]: systemctl list-unit-files --state enabled
UNIT FILE STATE
autovt@.service enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
display-manager.service enabled
getty@.service enabled
lightdm.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
remote-fs.target enabled
9 unit files listed.Offline
#12 2018-01-25 08:39:06
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
Can you post
journalctl -b --unit=NetworkManagerafter a failed connection attempt? FWIW I do use NetworkManager with an eduroam connection and it works just fine, as I use KDE however I used their NM manager to configure my connection.
If the nm-applet fails to give you a dialog, are you at least able to manually configure the connection in nm-connection-editor ?
Last edited by V1del (2018-01-25 08:44:13)
Offline
#13 2018-01-25 10:00:57
- B1omman
- Member
- Registered: 2016-02-16
- Posts: 36
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
That page will provide you with a script that sets up an eduroam connection with wpa_supplicant based on the university you choose.
Offline
#14 2018-01-25 23:10:36
- Deditionis
- Member
- Registered: 2018-01-14
- Posts: 15
Re: [Solved] Network Manager (nw-applet) not connecting to wifi
nm-connection-editor allowed me to edit the network connection settings, but I couldn't get NetworkManager to work regardless.
This is probably frowned upon here in this forum, but I have decided to uninstall vanilla Arch in favor of Antergos. Thank you everybody for helping, but this is not worth the time and effort for me, especially when I have little time for hobbies and want to just use Linux. Good community here, but I don't think vanilla Arch is right for me right now.
Thanks again, everybody.
Last edited by Deditionis (2018-01-25 23:11:41)
Offline