[SOLVED] I cant start my i3 WM, but the other desktop work fine

as3mbus · 2018-01-22 06:09:57

Hello, this is my first time using arch, i've used ubuntu beforehand.
i found out this installation experience is really interest me where i can (must) tweak and configure my own system which i want to. but lately im confused on how X work and ended up look everywhere to get it running.
my installation mostly follow arch wiki including xorg, xinit, libinput, NVIDIA, and NVIDIA Optimus, (which is my laptop are) and choosing to run nvidia only

it was working fine for installing DE like gnome and xfce, everything went fine. but somehow i cant get i3 to work on my system. I've search as much as i could and still cant manage to find a solution, and finally i try posting here as my last resort.

thank you, and sorry beforehand, if i seem really hard to understand

Last edited by as3mbus (2018-01-25 05:40:30)

Head_on_a_Stick · 2018-01-22 06:58:51

as3mbus wrote:

somehow i cant get i3 to work on my system

You need to tell us exactly what you have tried already.

How are you starting the graphical desktop? Are you using a display manager?

as3mbus · 2018-01-22 07:25:31

Head_on_a_Stick wrote:

as3mbus wrote:
somehow i cant get i3 to work on my system
You need to tell us exactly what you have tried already.
How are you starting the graphical desktop? Are you using a display manager?

thank you for fast response

i did not use any display manager. but installed gdm to be able to start gnome-session (since i cant find it without gdm installed)

here what I've did beforehand

- installing xorg, and it's stuff including libinput
- installing nvidia driver with additional configuration to use NVIDIA instead of intel (Optimus Laptop)
- editing xinitrc regarding nvidia configuration above
- install i3.
- adding configuration for xserverrc based on information in xinit wiki

it was working before several hours ago.
but i need to start it through .xinitrc to be able to start and display i3, but what i intended to do is able to start i3 through startx /usr/bin/i3

and here what i've tried

- after some searching (googling, rereading wiki and reading forum) i tried to remove i3 with pacman -Rsn
- and re install it but failed since it seems my package database failed to resolve i3 dependency
- ended up using pacman -Syy
- Installing my i3 again , but now it can resolve it's dependency just fine
- now it cant even start i3 even through .xinitrc

trying to log it but it doesn't seems to show any error

01/22/2018 12:52:15 PM - i3 4.14.1 (2017-09-24) starting
01/22/2018 12:52:15 PM - Parsing configfile /home/as3mbus/.config/i3/config
01/22/2018 12:52:15 PM - deciding for version 4 due to this line: # i3 config file (v4)
01/22/2018 12:52:15 PM - [libi3] ../i3-4.14.1/../i3-4.14.1/libi3/font.c Using Pango font monospace, size 8
01/22/2018 12:52:15 PM - Used number 1 for workspace with name 1
01/22/2018 12:52:15 PM - This is not an in-place restart, copying root window contents to a pixmap
01/22/2018 12:52:15 PM - Starting bar process: i3bar --bar_id=bar-0 --socket="/run/user/1000/i3/ipc-socket.2738"
01/22/2018 12:52:15 PM - executing: i3bar --bar_id=bar-0 --socket="/run/user/1000/i3/ipc-socket.2738"
01/22/2018 12:52:15 PM - IPC: looking for config for bar ID "bar-0"
01/22/2018 12:52:15 PM - workspace visible? fs = 0x564567e32860, ws = 0x564567e32860
01/22/2018 12:52:15 PM - WM_CLASS changed to i3bar (instance), i3bar (class)
01/22/2018 12:52:15 PM - WM_NAME changed to "i3bar for output xroot-0"
01/22/2018 12:52:15 PM - Using legacy window title. Note that in order to get Unicode window titles in i3, the application has to set _NET_WM_NAME (UTF-8)
01/22/2018 12:52:15 PM - This window is of type dock
01/22/2018 12:52:15 PM - Checking window 0x00800006 (class i3bar)
01/22/2018 12:52:15 PM - dock status does not match
01/22/2018 12:52:15 PM - Checking window 0x00800006 (class i3bar)
01/22/2018 12:52:15 PM - dock status matches
01/22/2018 12:52:15 PM - workspace visible? fs = 0x564567e32860, ws = 0x564567e32860
01/22/2018 12:52:15 PM - workspace visible? fs = 0x564567e2e9d0, ws = 0x564567e2e9d0
01/22/2018 12:52:15 PM - ClientMessage for window 0x000002c6
01/22/2018 12:52:15 PM - workspace visible? fs = 0x564567e32860, ws = 0x564567e32860
[libi3] ../i3-4.14.1/../i3-4.14.1/libi3/font.c Using Pango font monospace, size 8

here .xinitrc that was based on nvidia optimus wiki

#!/bin.bash
xrandr --setprovideroutputsource modesetting 
xrandr --auto

and here for .xserverrc

exec /usr/bin/Xorg -nolisten tcp -nolisten local "$@" vt$XDG_VTNR

xorg log

[  4860.720] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[  4860.725] X Protocol Version 11, Revision 0
[  4860.726] Build Operating System: Linux 4.9.71-1-lts x86_64 
[  4860.729] Current Operating System: Linux a3-laptop 4.14.14-1-ARCH #1 SMP PREEMPT Fri Jan 19 18:42:04 UTC 2018 x86_64
[  4860.729] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5c06e9aa-0d84-4e96-8766-f3e4f9e37fd7 rw quiet
[  4860.733] Build Date: 25 December 2017  02:02:38PM
[  4860.734]  
[  4860.735] Current version of pixman: 0.34.0
[  4860.740] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  4860.740] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4860.751] (==) Log file: "/var/log/Xorg.2.log", Time: Mon Jan 22 13:44:13 2018
[  4860.754] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  4860.757] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4860.757] (==) ServerLayout "Default Layout"
[  4860.757] (**) |-->Screen "Default Screen" (0)
[  4860.757] (**) |   |-->Monitor "<default monitor>"
[  4860.757] (**) |   |-->Device "nvidia"
[  4860.757] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[  4860.757] (**) |-->Input Device "Keyboard0"
[  4860.757] (**) |-->Input Device "Mouse0"
[  4860.757] (==) Automatically adding devices
[  4860.757] (==) Automatically enabling devices
[  4860.757] (==) Automatically adding GPU devices
[  4860.757] (==) Automatically binding GPU devices
[  4860.757] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  4860.757] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  4860.757] 	Entry deleted from font path.
[  4860.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  4860.757] 	Entry deleted from font path.
[  4860.757] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  4860.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  4860.758] 	Entry deleted from font path.
[  4860.758] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  4860.758] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[  4860.758] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4860.758] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  4860.758] (WW) Disabling Keyboard0
[  4860.758] (WW) Disabling Mouse0
[  4860.758] (II) Loader magic: 0x55d28cd5bd60
[  4860.758] (II) Module ABI versions:
[  4860.758] 	X.Org ANSI C Emulation: 0.4
[  4860.758] 	X.Org Video Driver: 23.0
[  4860.758] 	X.Org XInput driver : 24.1
[  4860.758] 	X.Org Server Extension : 10.0
[  4860.759] (++) using VT number 3

[  4860.759] (--) controlling tty is VT number 3, auto-enabling KeepTty
[  4860.761] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c6
[  4860.762] (II) xfree86: Adding drm device (/dev/dri/card1)
[  4860.763] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[  4860.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[  4860.764] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[  4860.766] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[  4860.766] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[  4860.769] (--) PCI: (0:0:2:0) 8086:0166:1043:100d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  4860.769] (--) PCI:*(0:1:0:0) 10de:0fdf:1043:100d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  4860.769] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  4860.769] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  4860.769] (II) LoadModule: "modesetting"
[  4860.769] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  4860.769] (II) Module modesetting: vendor="X.Org Foundation"
[  4860.769] 	compiled for 1.19.6, module version = 1.19.6
[  4860.769] 	Module class: X.Org Video Driver
[  4860.769] 	ABI class: X.Org Video Driver, version 23.0
[  4860.769] (II) LoadModule: "glx"
[  4860.770] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[  4860.773] (II) Module glx: vendor="NVIDIA Corporation"
[  4860.773] 	compiled for 4.0.2, module version = 1.0.0
[  4860.773] 	Module class: X.Org Server Extension
[  4860.773] (II) NVIDIA GLX Module  387.34  Tue Nov 21 02:04:31 PST 2017
[  4860.773] (II) LoadModule: "nvidia"
[  4860.773] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  4860.774] (II) Module nvidia: vendor="NVIDIA Corporation"
[  4860.774] 	compiled for 4.0.2, module version = 1.0.0
[  4860.774] 	Module class: X.Org Video Driver
[  4860.774] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  4860.774] (II) NVIDIA dlloader X Driver  387.34  Tue Nov 21 01:38:22 PST 2017
[  4860.774] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  4860.774] (WW) Falling back to old probe method for modesetting
[  4860.774] (II) systemd-logind: releasing fd for 226:1
[  4860.775] (II) Loading sub module "fb"
[  4860.775] (II) LoadModule: "fb"
[  4860.775] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4860.775] (II) Module fb: vendor="X.Org Foundation"
[  4860.775] 	compiled for 1.19.6, module version = 1.0.0
[  4860.775] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4860.775] (II) Loading sub module "wfb"
[  4860.775] (II) LoadModule: "wfb"
[  4860.775] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  4860.776] (II) Module wfb: vendor="X.Org Foundation"
[  4860.776] 	compiled for 1.19.6, module version = 1.0.0
[  4860.776] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4860.776] (II) Loading sub module "ramdac"
[  4860.776] (II) LoadModule: "ramdac"
[  4860.776] (II) Module "ramdac" already built-in
[  4860.776] (II) modeset(G0): using drv /dev/dri/card0
[  4860.776] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  4860.776] (==) NVIDIA(0): RGB weight 888
[  4860.776] (==) NVIDIA(0): Default visual is TrueColor
[  4860.776] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  4860.777] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[  4860.777] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  4860.777] (**) NVIDIA(0): Enabling 2D acceleration
[  4860.781] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK107) at PCI:1:0:0 (GPU-0)
[  4860.781] (--) NVIDIA(0): Memory: 2097152 kBytes
[  4860.781] (--) NVIDIA(0): VideoBIOS: 80.07.90.00.02
[  4860.781] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  4860.782] (II) NVIDIA(0): Validated MetaModes:
[  4860.782] (II) NVIDIA(0):     "NULL"
[  4860.782] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  4860.782] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[  4860.782] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  4860.782] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[  4860.782] (==) modeset(G0): RGB weight 888
[  4860.782] (==) modeset(G0): Default visual is TrueColor
[  4860.782] (II) Loading sub module "glamoregl"
[  4860.782] (II) LoadModule: "glamoregl"
[  4860.782] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  4860.783] (II) Module glamoregl: vendor="X.Org Foundation"
[  4860.783] 	compiled for 1.19.6, module version = 1.0.0
[  4860.783] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4860.783] (II) glamor: OpenGL accelerated X.org driver based.
[  4860.797] (II) glamor: EGL version 1.4 (DRI2):
[  4860.801] (II) modeset(G0): glamor initialized
[  4860.801] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[  4860.805] (II) modeset(G0): Output VGA-1-1 has no monitor section
[  4860.813] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[  4860.814] (II) modeset(G0): Output DP-1-1 has no monitor section
[  4860.814] (II) modeset(G0): EDID for output LVDS-1-1
[  4860.814] (II) modeset(G0): Manufacturer: CMN  Model: 1472  Serial#: 0
[  4860.814] (II) modeset(G0): Year: 2011  Week: 35
[  4860.814] (II) modeset(G0): EDID Version: 1.3
[  4860.814] (II) modeset(G0): Digital Display Input
[  4860.814] (II) modeset(G0): Max Image Size [cm]: horiz.: 31  vert.: 17
[  4860.814] (II) modeset(G0): Gamma: 2.20
[  4860.814] (II) modeset(G0): No DPMS capabilities specified
[  4860.814] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  4860.814] (II) modeset(G0): First detailed timing is preferred mode
[  4860.814] (II) modeset(G0): redX: 0.608 redY: 0.349   greenX: 0.340 greenY: 0.556
[  4860.814] (II) modeset(G0): blueX: 0.169 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
[  4860.814] (II) modeset(G0): Manufacturer's mask: 0
[  4860.814] (II) modeset(G0): Supported detailed timing:
[  4860.814] (II) modeset(G0): clock: 69.3 MHz   Image Size:  309 x 174 mm
[  4860.814] (II) modeset(G0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1466 h_border: 0
[  4860.814] (II) modeset(G0): v_active: 768  v_sync: 769  v_sync_end 773 v_blanking: 788 v_border: 0
[  4860.814] (II) modeset(G0):  N140BGE-L42
[  4860.814] (II) modeset(G0):  CMN
[  4860.814] (II) modeset(G0):  N140BGE-L42
[  4860.814] (II) modeset(G0): EDID (in hex):
[  4860.814] (II) modeset(G0): 	00ffffffffffff000dae721400000000
[  4860.814] (II) modeset(G0): 	23150103801f11780ad1459b59578e2b
[  4860.814] (II) modeset(G0): 	23505400000001010101010101010101
[  4860.814] (II) modeset(G0): 	010101010101121b5664500014303020
[  4860.814] (II) modeset(G0): 	140035ae10000018000000fe004e3134
[  4860.814] (II) modeset(G0): 	304247452d4c34320a20000000fe0043
[  4860.814] (II) modeset(G0): 	4d4e0a202020202020202020000000fe
[  4860.814] (II) modeset(G0): 	004e3134304247452d4c34320a200006
[  4860.815] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[  4860.815] (II) modeset(G0): Modeline "1366x768"x60.0   69.30  1366 1414 1446 1466  768 769 773 788 -hsync -vsync (47.3 kHz eP)
[  4860.815] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  4860.815] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  4860.815] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  4860.815] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  4860.815] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  4860.815] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  4860.815] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  4860.815] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  4860.815] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  4860.815] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  4860.815] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  4860.815] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  4860.815] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  4860.815] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  4860.815] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  4860.815] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  4860.820] (II) modeset(G0): EDID for output VGA-1-1
[  4860.828] (II) modeset(G0): EDID for output HDMI-1-1
[  4860.828] (II) modeset(G0): EDID for output DP-1-1
[  4860.828] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[  4860.828] (==) modeset(G0): DPI set to (96, 96)
[  4860.828] (II) Loading sub module "fb"
[  4860.828] (II) LoadModule: "fb"
[  4860.828] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4860.829] (II) Module fb: vendor="X.Org Foundation"
[  4860.829] 	compiled for 1.19.6, module version = 1.0.0
[  4860.829] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4860.829] (--) Depth 24 pixmap format is 32 bpp
[  4860.913] (==) modeset(G0): Backing store enabled
[  4860.913] (==) modeset(G0): Silken mouse enabled
[  4860.913] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4860.940] (==) modeset(G0): DPMS enabled
[  4860.940] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[  4860.940] (II) modeset(G0): [DRI2] Setup complete
[  4860.940] (II) modeset(G0): [DRI2]   DRI driver: i965
[  4860.940] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[  4860.941] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[  4860.941] (II) NVIDIA:     access.
[  4860.968] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  4860.968] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  4860.968] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  4860.968] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  4860.968] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  4860.968] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  4860.968] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  4860.968] (II) NVIDIA(0):     Config Options in the README.
[  4860.980] (II) NVIDIA(0): Setting mode "NULL"
[  4860.986] (==) NVIDIA(0): Disabling shared memory pixmaps
[  4860.986] (==) NVIDIA(0): Backing store enabled
[  4860.986] (==) NVIDIA(0): Silken mouse enabled
[  4860.986] (==) NVIDIA(0): DPMS enabled
[  4860.986] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[  4860.986] (II) Loading sub module "dri2"
[  4860.986] (II) LoadModule: "dri2"
[  4860.986] (II) Module "dri2" already built-in
[  4860.986] (II) NVIDIA(0): [DRI2] Setup complete
[  4860.986] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  4860.986] (--) RandR disabled
[  4860.989] (II) Initializing extension GLX
[  4860.989] (II) Indirect GLX disabled.
[  4861.277] (II) modeset(G0): Damage tracking initialized
[  4861.326] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  4861.326] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  4861.326] (II) LoadModule: "libinput"
[  4861.326] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  4861.328] (II) Module libinput: vendor="X.Org Foundation"
[  4861.328] 	compiled for 1.19.3, module version = 0.26.0
[  4861.328] 	Module class: X.Org XInput Driver
[  4861.328] 	ABI class: X.Org XInput driver, version 24.1
[  4861.328] (II) Using input driver 'libinput' for 'Power Button'
[  4861.329] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[  4861.329] (**) Power Button: always reports core events
[  4861.329] (**) Option "Device" "/dev/input/event3"
[  4861.329] (**) Option "_source" "server/udev"
[  4861.330] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  4861.330] (II) event3  - (II) Power Button: (II) device is a keyboard
[  4861.330] (II) event3  - (II) Power Button: (II) device removed
[  4861.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[  4861.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4861.330] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  4861.330] (II) event3  - (II) Power Button: (II) device is a keyboard
[  4861.331] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  4861.331] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  4861.331] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  4861.332] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 42 paused 0
[  4861.332] (**) Asus Wireless Radio Control: always reports core events
[  4861.332] (**) Option "Device" "/dev/input/event4"
[  4861.332] (**) Option "_source" "server/udev"
[  4861.332] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[  4861.332] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[  4861.332] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[  4861.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input8/event4"
[  4861.332] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  4861.333] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[  4861.333] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[  4861.333] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  4861.333] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  4861.333] (II) Using input driver 'libinput' for 'Video Bus'
[  4861.334] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 43 paused 0
[  4861.334] (**) Video Bus: always reports core events
[  4861.334] (**) Option "Device" "/dev/input/event6"
[  4861.334] (**) Option "_source" "server/udev"
[  4861.335] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  4861.335] (II) event6  - (II) Video Bus: (II) device is a keyboard
[  4861.335] (II) event6  - (II) Video Bus: (II) device removed
[  4861.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event6"
[  4861.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  4861.336] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  4861.336] (II) event6  - (II) Video Bus: (II) device is a keyboard
[  4861.337] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  4861.337] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  4861.337] (II) Using input driver 'libinput' for 'Video Bus'
[  4861.338] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 44 paused 0
[  4861.338] (**) Video Bus: always reports core events
[  4861.338] (**) Option "Device" "/dev/input/event5"
[  4861.338] (**) Option "_source" "server/udev"
[  4861.338] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  4861.338] (II) event5  - (II) Video Bus: (II) device is a keyboard
[  4861.338] (II) event5  - (II) Video Bus: (II) device removed
[  4861.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9/event5"
[  4861.338] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[  4861.339] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  4861.339] (II) event5  - (II) Video Bus: (II) device is a keyboard
[  4861.340] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  4861.340] (II) No input driver specified, ignoring this device.
[  4861.340] (II) This device may have been added with another device file.
[  4861.340] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  4861.340] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  4861.340] (II) Using input driver 'libinput' for 'Sleep Button'
[  4861.341] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 45 paused 0
[  4861.341] (**) Sleep Button: always reports core events
[  4861.341] (**) Option "Device" "/dev/input/event2"
[  4861.341] (**) Option "_source" "server/udev"
[  4861.342] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  4861.342] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[  4861.342] (II) event2  - (II) Sleep Button: (II) device removed
[  4861.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[  4861.342] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  4861.343] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  4861.343] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[  4861.344] (II) config/udev: Adding input device USB Camera: USB 2.0 UVC HD Webc (/dev/input/event8)
[  4861.344] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "libinput keyboard catchall"
[  4861.344] (II) Using input driver 'libinput' for 'USB Camera: USB 2.0 UVC HD Webc'
[  4861.345] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 46 paused 0
[  4861.345] (**) USB Camera: USB 2.0 UVC HD Webc: always reports core events
[  4861.345] (**) Option "Device" "/dev/input/event8"
[  4861.345] (**) Option "_source" "server/udev"
[  4861.346] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[  4861.346] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[  4861.346] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[  4861.346] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13/event8"
[  4861.346] (II) XINPUT: Adding extended input device "USB Camera: USB 2.0 UVC HD Webc" (type: KEYBOARD, id 11)
[  4861.347] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[  4861.347] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[  4861.347] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[  4861.347] (II) No input driver specified, ignoring this device.
[  4861.347] (II) This device may have been added with another device file.
[  4861.348] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[  4861.348] (II) No input driver specified, ignoring this device.
[  4861.348] (II) This device may have been added with another device file.
[  4861.348] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event10)
[  4861.348] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  4861.348] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  4861.349] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 47 paused 0
[  4861.349] (**) Asus WMI hotkeys: always reports core events
[  4861.349] (**) Option "Device" "/dev/input/event10"
[  4861.349] (**) Option "_source" "server/udev"
[  4861.349] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[  4861.349] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[  4861.349] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[  4861.349] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event10"
[  4861.349] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[  4861.350] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[  4861.350] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[  4861.350] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  4861.350] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  4861.350] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  4861.351] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 48 paused 0
[  4861.351] (**) AT Translated Set 2 keyboard: always reports core events
[  4861.351] (**) Option "Device" "/dev/input/event0"
[  4861.351] (**) Option "_source" "server/udev"
[  4861.352] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  4861.352] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  4861.352] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  4861.352] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  4861.352] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[  4861.352] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  4861.352] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  4861.353] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[  4861.353] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  4861.353] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[  4861.353] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  4861.354] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 49 paused 0
[  4861.354] (**) ETPS/2 Elantech Touchpad: always reports core events
[  4861.354] (**) Option "Device" "/dev/input/event9"
[  4861.354] (**) Option "_source" "server/udev"
[  4861.354] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[  4861.354] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[  4861.354] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[  4861.355] (**) Option "Tapping" "on"
[  4861.355] (**) Option "AccelSpeed" "0.5"
[  4861.355] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event9"
[  4861.355] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[  4861.355] (**) Option "AccelerationScheme" "none"
[  4861.355] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[  4861.355] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  4861.355] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  4861.355] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[  4861.355] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[  4861.356] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  4861.356] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[  4861.356] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  4861.356] (**) ETPS/2 Elantech Touchpad: always reports core events
[  4861.356] (**) Option "Device" "/dev/input/mouse0"
[  4861.356] (**) Option "_source" "server/udev"
[  4861.402] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[  4861.403] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse0
[  4861.403] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad"
[  4861.403] (II) UnloadModule: "libinput"
[  4861.404] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[  4861.404] (II) No input driver specified, ignoring this device.
[  4861.404] (II) This device may have been added with another device file.
[  4872.662] (**) Option "fd" "39"
[  4872.662] (II) event3  - (II) Power Button: (II) device removed
[  4872.662] (**) Option "fd" "42"
[  4872.662] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[  4872.662] (**) Option "fd" "43"
[  4872.662] (II) event6  - (II) Video Bus: (II) device removed
[  4872.663] (**) Option "fd" "44"
[  4872.663] (II) event5  - (II) Video Bus: (II) device removed
[  4872.663] (**) Option "fd" "45"
[  4872.663] (II) event2  - (II) Sleep Button: (II) device removed
[  4872.663] (**) Option "fd" "46"
[  4872.663] (II) event8  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[  4872.663] (**) Option "fd" "47"
[  4872.664] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[  4872.664] (**) Option "fd" "48"
[  4872.664] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  4872.664] (**) Option "fd" "49"
[  4872.664] (II) event9  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[  4872.748] (II) systemd-logind: got pause for 13:64
[  4872.748] (II) systemd-logind: got pause for 13:70
[  4872.748] (II) systemd-logind: got pause for 13:69
[  4872.748] (II) systemd-logind: got pause for 13:73
[  4872.748] (II) systemd-logind: got pause for 13:67
[  4872.748] (II) systemd-logind: got pause for 226:0
[  4872.748] (II) systemd-logind: got pause for 13:68
[  4872.748] (II) systemd-logind: got pause for 13:66
[  4872.748] (II) systemd-logind: got pause for 13:72
[  4872.748] (II) systemd-logind: got pause for 13:74

ayekat · 2018-01-22 08:41:45

as3mbus wrote:

but i need to start it through .xinitrc to be able to start and display i3

According to the Wiki, i3 can be started from a DM: https://wiki.archlinux.org/index.php/I3#Display_manager.

but what i intended to do is able to start i3 through startx /usr/bin/i3

If you start i3 like that, it will only execute /usr/bin/i3 as the X client. If you want it to use your xinitrc, run it without any client arguments instead:

startx

Now, about that xinitrc...

here .xinitrc that was based on nvidia optimus wiki
#!/bin.bash
xrandr --setprovideroutputsource modesetting 
xrandr --auto

You're missing the line that actually starts your window manager (see the xinit Wiki page). Also, that shebang looks weird: it should be #!/bin/bash (and if you insist on actually using bash syntax, make sure the file is executable).

Also, slightly unrelated, but still very important for you as a newcomer to this distribution (welcome, by the way! ):

- ended up using pacman -Syy

You are guaranteed to run into issues if you keep doing that: https://wiki.archlinux.org/index.php/Sy … nsupported (also, please don't use that double -y unless you know what it does and why you need it).

Last edited by ayekat (2018-01-22 08:47:32)

as3mbus · 2018-01-22 10:35:13

ayekat wrote:

According to the Wiki, i3 can be started from a DM: https://wiki.archlinux.org/index.php/I3#Display_manager.

oh, i see. but i just installed it and replacing i3-gaps with it through pacman -Syu. but it still fails

ayekat wrote:

You're missing the line that actually starts your window manager (see the xinit Wiki page). Also, that shebang looks weird: it should be #!/bin/bash (and if you insist on actually using bash syntax, make sure the file is executable).

the /bin/bash one is a typo
ah yeah you are right, it seems im not reading it thoroughly and miss to understand override. since i thought xinitrc will always be executed before hand and will call the next one as it's argument. but seems like i misunderstand it really bad.

ayekat wrote:

You are guaranteed to run into issues if you keep doing that: https://wiki.archlinux.org/index.php/Sy … nsupported (also, please don't use that double -y unless you know what it does and why you need it).

oh my, i missed that important stuff as well. thank you for pointing that out i'll try to read more wiki later on

so after reading your post i've tried some more stuff, and it seems i wont need any xrandr stuff that was on my xinitrc before. (but making sure eveything not lost i commented it for now) because when i did make those command into a comment, both my xfce4 and gnome are still using nvidia GPU (checked with

glxinfo| grep NVIDIA

)

but still i cant manage to display i3 wm, whether through direct call with startx /usr/bin/i3 or through xinitrc which content is

xrandr --setprovideroutputsource modesetting 
xrandr --auto
exec i3 -V > i3.log

let me add more information. the i3 does run and i can interact it with keyboard (tried to exit it blindly with <mod> +shift + e, and it shows a dialog which i know through htop that display another child in those process tree).
but my screen is off when i am on vt where i3 is running.

once again thank you for responding

Trilby · 2018-01-22 12:41:37

ayekat wrote:

Also, that shebang looks weird: it should be #!/bin/bash (and if you insist on actually using bash syntax, make sure the file is executable).

Neither of those is actually relevant. That first line is not treated as shebang, it's just ignored as a comment.

ayekat · 2018-01-22 13:11:30

Hmm, unfortunately I'm not at all familiar with Nvidia cards and switching graphics output between two graphic cards (I just know that most people use the Intel chip and then launch specific applications with the dedicated one)

I fear I'm not able to help much here.

Trilby wrote:

Neither of those is actually relevant. That first line is not treated as shebang, it's just ignored as a comment.

According to the linked source, xinit will execute whatever it is given as client program directly (note that this is not necessarily the xinitrc). If the xinitrc is executable, it will be invoked like any other executable text file: Either there is a shebang to specify the interpreter, or there is none, in which case (at least on my machine), it defaults to /bin/sh.

Only if the execution fails (e.g. because the client program is not executable), xinit will invoke the (hardcoded) "sh" command with the client as argument (interestingly without checking if it's actually a shell script or even a text file). In that case, yes, the shebang is irrelevant. But so would be putting bash syntax in the (non-executable) xinitrc, because it's actually supposed to be parsed by any POSIX-compatible shell then¹.

_____
¹ Arch Linux symlinks /bin/sh to bash by default, so this wouldn't cause any issues for most people, and many bashisms therefore often go unchecked here. But the behaviour is not portable to non-Arch systems.

seth · 2018-01-22 13:26:50

Try to just "exec xterm", check whether you get an xterm, run i3 from there and see what happens.
If you get a visible xterm and running i3 turns off your output, it has most likely some randr configuration (xrandr calls in your i3 config?) that nukes the working setup.

Trilby · 2018-01-22 13:30:54

Yes, and given that there is no bash specific syntax in the above displayed xinitrc, it is - again - irrelevant. The exact same processes would run for any combination of valid/invalid shell shebangs and executable/not-executable files. If you get the exact same output with a valid or broken shebang and with an executable or non-executable file, then those two variables are irrelevant.

ayekat · 2018-01-22 13:42:08

Trilby wrote:

Yes, and given that there is no bash specific syntax in the above displayed xinitrc, it is - again - irrelevant.

Yes, it is irrelevant for this specific case, but it is still wrong in the general case and I believe it is worth pointing out. But I should have probably put it under the "irrelevant but still important" part below in that comment together with the remark about partial upgrades (where the same criterias apply—it hasn't caused any issues here, but it might very well do so at some later point).

Anyway, this is getting a bit offtopic, I'm sorry for the noise.

Last edited by ayekat (2018-01-22 13:42:21)

Head_on_a_Stick · 2018-01-22 17:00:43

as3mbus wrote:

[  4872.748] (II) systemd-logind: got pause for 13:64
[  4872.748] (II) systemd-logind: got pause for 13:70
[  4872.748] (II) systemd-logind: got pause for 13:69
[  4872.748] (II) systemd-logind: got pause for 13:73
[  4872.748] (II) systemd-logind: got pause for 13:67
[  4872.748] (II) systemd-logind: got pause for 226:0
[  4872.748] (II) systemd-logind: got pause for 13:68
[  4872.748] (II) systemd-logind: got pause for 13:66
[  4872.748] (II) systemd-logind: got pause for 13:72
[  4872.748] (II) systemd-logind: got pause for 13:74

https://bbs.archlinux.org/viewtopic.php?id=204323

If you try switching to another TTY and back again, does the desktop then appear?

What if you try the nouveau drivers?

EDIT: or just the Intel integrated card.

Last edited by Head_on_a_Stick (2018-01-22 17:01:39)

as3mbus · 2018-01-23 02:58:14

seth wrote:

Try to just "exec xterm", check whether you get an xterm, run i3 from there and see what happens.

changing i3 to xterm in my .xinitrc and executing startx also turn off my display. (does it means there are some problem with my xorg config file

If you get a visible xterm and running i3 turns off your output, it has most likely some randr configuration (xrandr calls in your i3 config?) that nukes the working setup.

here what i tried after reading your post
changing exec i3 to exec xterm in .xinitrc and tried startx ( display = off )
removing the xrandr command inside xinitrc with exec i3 ( display = off )
removing the xrandr command inside xinitrc with exec xterm ( display = off )

at this point i feels like there might be something wrong in my xorg.conf file
but there are no xorg.conf file inside /etc/X11/ since i moved configuration that i got from nvidia-xconfig to /etx/X11/xorg.conf.d/10-nvidia.conf

tried adding xorg.conf with instruction from nvidia optimus arch wiki site
testing with the same 3 case above still result the same ( display = off )

Head_on_a_Stick wrote:

If you try switching to another TTY and back again, does the desktop then appear?

if what you mean by desktop is the gnome session and xfce session, then yes.
but for i3 no. it basically turn off my display everytime i switch back to tty with i3 running on it

What if you try the nouveau drivers?
EDIT: or just the Intel integrated card.

but from what i searched on internet nouveau driver have worse performance from nvidia proprietary driver. Intel in the other hand doesnt seem to be able to give better performance for me when working with unity3d.
i still havent fully understand how to switch between nvidia/ nouverau and intel graphic card .
what i understand so far in graphic card switching is those config file inside /etc/X11/xorg.conf.d and xrandr command that set the graphic card used to nvidia
i would like more better explanation since im having hard time understanding archwiki on nvidia optimus.

B1omman · 2018-01-23 05:09:17

as3mbus wrote:

at this point i feels like there might be something wrong in my xorg.conf file
but there are no xorg.conf file inside /etc/X11/ since i moved configuration that i got from nvidia-xconfig to /etx/X11/xorg.conf.d/10-nvidia.conf

There is no way for us to tell you if anything is wrong with it if you don't show it to us.

The Nvidia Optimus page mostly detail what to add to an existing configuration.
Try to remove/stash your ~/.xinitrc and run startx, this will use the system default configuration. If it works, try add this to your ~/.xinitrc, before any xrandr call:

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
  for f in /etc/X11/xinit/xinitrc.d/?* ; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

If it works, I suggest you read https://wiki.archlinux.org/index.php/Xinit again, carefully and not skipping any of the explanations.

If that was not the missing step, give us something to work with. Please post the contents of the xorg.conf you have now, as well as any configuration file located in /etc/X11/xorg.conf.d/ containing a Device, Screen or Monitor section. Also post the output of

$ lspci | egrep 'VGA|3D'

as3mbus · 2018-01-23 07:48:36

B1omman wrote:

There is no way for us to tell you if anything is wrong with it if you don't show it to us.

sorry i thought content of file generated from nvidia-xconfig wont be needed
here is the 10-nvidia.conf i was talking about

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 387.34  (buildmeister@swio-display-x64-rhel04-15)  Tue Nov 21 03:31:45 PST 2017

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

sorry i thought content of file generated from nvidia-xconfig wont be needed
Section "Module"
    Load           "modesetting"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Device"
    Identifier     "nvidia"
    Driver         "nvidia"
    BusID          "1:0:0"
    Option         "AllowEmptyInitialConfiguration"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nvidia"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

The Nvidia Optimus page mostly detail what to add to an existing configuration.
Try to remove/stash your ~/.xinitrc and run startx, this will use the system default configuration. If it works, try add this to your ~/.xinitrc, before any xrandr call:
If it works, I suggest you read https://wiki.archlinux.org/index.php/Xinit again, carefully and not skipping any of the explanations.
If that was not the missing step, give us something to work with. Please post the contents of the xorg.conf you have now, as well as any configuration file located in /etc/X11/xorg.conf.d/ containing a Device, Screen or Monitor section. Also post the output of
$ lspci | egrep 'VGA|3D' 

so after reading your post i do another test and try which is the following :

- moving.xinitrc to another folder, and run startx, (resulting Display = off )
- with same state as before trying to run startx /usr/bin/i3 result the same
- moving /etc/X11/xorg.conf.d/10-nvidia.conf to my home folder (resulting Display = off)
- with same state as before trying to run startx /usr/bin/i3 result the same

lspci| egrep "VGA|3D"

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)

here is my current state of /etc/X11 and /home

ls -aR /etc/X11

/etc/X11:
.
..
xinit
xorg.conf.d

/etc/X11/xinit:
.
..
xinitrc
xinitrc.d
xserverrc

/etc/X11/xinit/xinitrc.d:
.
..
40-libcanberra-gtk-module.sh
50-systemd-user.sh

/etc/X11/xorg.conf.d:
.
..
30-touchpad.conf

with content of 30-touchpad.conf below

Section "InputClass"
        Identifier "10"
	MatchIsTouchpad "on"
        Driver "libinput"
        Option "Tapping" "on"
        Option "AccelSpeed" "0.5"
EndSection

sorry for my slow response, and my bad understanding..

Last edited by as3mbus (2018-01-23 09:25:47)

seth · 2018-01-23 08:49:04

Ok
1. you had a bogus xorg config from the nvidia config generator around
2. startx xterm didn't work
3. there's actually no way xfce could have ever worked on that setup. so that premise should have been misleading?
4. we're missing an updated Xorg log w/o the bogus config involved
5. read https://wiki.archlinux.org/index.php/NVIDIA_Optimus and if you want the thing to be runtime switchable https://wiki.archlinux.org/index.php/Bumblebee

as3mbus · 2018-01-23 09:44:18

i've moved every configuration file inside /etc/X11/xorg.conf.d except 30-touchpad.conf to my home folder (does that still counts)
move my .xinitrc into another folder inside my home folder
i believe i dont hav anymore nvidia bogus config that run

here are my xorg log on startx without any xinitrc nor any config file other than 30-touchpad.conf

[ 13877.319] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 13877.319] X Protocol Version 11, Revision 0
[ 13877.319] Build Operating System: Linux 4.9.71-1-lts x86_64 
[ 13877.319] Current Operating System: Linux a3-laptop 4.14.14-1-ARCH #1 SMP PREEMPT Fri Jan 19 18:42:04 UTC 2018 x86_64
[ 13877.319] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5c06e9aa-0d84-4e96-8766-f3e4f9e37fd7 rw quiet
[ 13877.319] Build Date: 25 December 2017  02:02:38PM
[ 13877.319]  
[ 13877.319] Current version of pixman: 0.34.0
[ 13877.320] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 13877.320] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13877.326] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Jan 23 16:27:50 2018
[ 13877.327] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13877.328] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13877.328] (==) No Layout section.  Using the first Screen section.
[ 13877.328] (==) No screen section available. Using defaults.
[ 13877.328] (**) |-->Screen "Default Screen Section" (0)
[ 13877.328] (**) |   |-->Monitor "<default monitor>"
[ 13877.328] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 13877.328] (==) Automatically adding devices
[ 13877.328] (==) Automatically enabling devices
[ 13877.328] (==) Automatically adding GPU devices
[ 13877.328] (==) Automatically binding GPU devices
[ 13877.328] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13877.329] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13877.329] 	Entry deleted from font path.
[ 13877.329] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13877.329] 	Entry deleted from font path.
[ 13877.329] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13877.329] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13877.329] 	Entry deleted from font path.
[ 13877.329] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13877.329] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[ 13877.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13877.329] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13877.329] (II) Loader magic: 0x563d7b996d60
[ 13877.329] (II) Module ABI versions:
[ 13877.329] 	X.Org ANSI C Emulation: 0.4
[ 13877.329] 	X.Org Video Driver: 23.0
[ 13877.329] 	X.Org XInput driver : 24.1
[ 13877.329] 	X.Org Server Extension : 10.0
[ 13877.330] (++) using VT number 3

[ 13877.330] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 13877.333] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 13877.334] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13877.335] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 13877.336] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13877.337] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 13877.338] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 13877.338] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 13877.339] (--) PCI: (0:0:2:0) 8086:0166:1043:100d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 13877.339] (--) PCI:*(0:1:0:0) 10de:0fdf:1043:100d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13877.339] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13877.339] (II) LoadModule: "glx"
[ 13877.340] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 13877.343] (II) Module glx: vendor="NVIDIA Corporation"
[ 13877.343] 	compiled for 4.0.2, module version = 1.0.0
[ 13877.343] 	Module class: X.Org Server Extension
[ 13877.343] (II) NVIDIA GLX Module  387.34  Tue Nov 21 02:04:31 PST 2017
[ 13877.343] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 13877.343] 	loading driver: nvidia
[ 13877.343] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 13877.343] 	loading driver: modesetting
[ 13877.343] (==) Matched nvidia as autoconfigured driver 0
[ 13877.343] (==) Matched nouveau as autoconfigured driver 1
[ 13877.343] (==) Matched nv as autoconfigured driver 2
[ 13877.343] (==) Matched modesetting as autoconfigured driver 3
[ 13877.343] (==) Matched intel as autoconfigured driver 4
[ 13877.343] (==) Matched nouveau as autoconfigured driver 5
[ 13877.343] (==) Matched nv as autoconfigured driver 6
[ 13877.343] (==) Matched modesetting as autoconfigured driver 7
[ 13877.343] (==) Matched fbdev as autoconfigured driver 8
[ 13877.343] (==) Matched vesa as autoconfigured driver 9
[ 13877.343] (==) Assigned the driver to the xf86ConfigLayout
[ 13877.343] (II) LoadModule: "nvidia"
[ 13877.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13877.344] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13877.344] 	compiled for 4.0.2, module version = 1.0.0
[ 13877.344] 	Module class: X.Org Video Driver
[ 13877.344] (II) LoadModule: "nouveau"
[ 13877.344] (WW) Warning, couldn't open module nouveau
[ 13877.344] (II) UnloadModule: "nouveau"
[ 13877.344] (II) Unloading nouveau
[ 13877.344] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 13877.344] (II) LoadModule: "nv"
[ 13877.345] (WW) Warning, couldn't open module nv
[ 13877.345] (II) UnloadModule: "nv"
[ 13877.345] (II) Unloading nv
[ 13877.345] (EE) Failed to load module "nv" (module does not exist, 0)
[ 13877.345] (II) LoadModule: "modesetting"
[ 13877.345] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 13877.345] (II) Module modesetting: vendor="X.Org Foundation"
[ 13877.345] 	compiled for 1.19.6, module version = 1.19.6
[ 13877.345] 	Module class: X.Org Video Driver
[ 13877.345] 	ABI class: X.Org Video Driver, version 23.0
[ 13877.345] (II) LoadModule: "intel"
[ 13877.345] (WW) Warning, couldn't open module intel
[ 13877.345] (II) UnloadModule: "intel"
[ 13877.345] (II) Unloading intel
[ 13877.345] (EE) Failed to load module "intel" (module does not exist, 0)
[ 13877.345] (II) LoadModule: "fbdev"
[ 13877.346] (WW) Warning, couldn't open module fbdev
[ 13877.346] (II) UnloadModule: "fbdev"
[ 13877.346] (II) Unloading fbdev
[ 13877.346] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13877.346] (II) LoadModule: "vesa"
[ 13877.346] (WW) Warning, couldn't open module vesa
[ 13877.346] (II) UnloadModule: "vesa"
[ 13877.346] (II) Unloading vesa
[ 13877.346] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13877.346] (II) NVIDIA dlloader X Driver  387.34  Tue Nov 21 01:38:22 PST 2017
[ 13877.346] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13877.346] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13877.346] (II) systemd-logind: releasing fd for 226:1
[ 13877.347] (II) Loading sub module "fb"
[ 13877.347] (II) LoadModule: "fb"
[ 13877.347] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13877.348] (II) Module fb: vendor="X.Org Foundation"
[ 13877.348] 	compiled for 1.19.6, module version = 1.0.0
[ 13877.348] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 13877.348] (II) Loading sub module "wfb"
[ 13877.348] (II) LoadModule: "wfb"
[ 13877.348] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13877.348] (II) Module wfb: vendor="X.Org Foundation"
[ 13877.348] 	compiled for 1.19.6, module version = 1.0.0
[ 13877.348] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 13877.349] (II) Loading sub module "ramdac"
[ 13877.349] (II) LoadModule: "ramdac"
[ 13877.349] (II) Module "ramdac" already built-in
[ 13877.349] (WW) Falling back to old probe method for modesetting
[ 13877.349] (II) modeset(G0): using drv /dev/dri/card0
[ 13877.349] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 13877.349] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 13877.349] (==) NVIDIA(0): RGB weight 888
[ 13877.349] (==) NVIDIA(0): Default visual is TrueColor
[ 13877.349] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13877.350] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 13877.350] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 13877.350] (**) NVIDIA(0): Enabling 2D acceleration
[ 13877.356] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK107) at PCI:1:0:0 (GPU-0)
[ 13877.356] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 13877.356] (--) NVIDIA(0): VideoBIOS: 80.07.90.00.02
[ 13877.356] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13877.356] (II) NVIDIA(0): Validated MetaModes:
[ 13877.356] (II) NVIDIA(0):     "NULL"
[ 13877.356] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 13877.356] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 13877.356] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 13877.356] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 13877.356] (==) modeset(G0): RGB weight 888
[ 13877.356] (==) modeset(G0): Default visual is TrueColor
[ 13877.356] (II) Loading sub module "glamoregl"
[ 13877.356] (II) LoadModule: "glamoregl"
[ 13877.356] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 13877.357] (II) Module glamoregl: vendor="X.Org Foundation"
[ 13877.357] 	compiled for 1.19.6, module version = 1.0.0
[ 13877.357] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 13877.357] (II) glamor: OpenGL accelerated X.org driver based.
[ 13877.370] (II) glamor: EGL version 1.4 (DRI2):
[ 13877.375] (II) modeset(G0): glamor initialized
[ 13877.375] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 13877.379] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 13877.387] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 13877.387] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 13877.388] (II) modeset(G0): EDID for output LVDS-1-1
[ 13877.388] (II) modeset(G0): Manufacturer: CMN  Model: 1472  Serial#: 0
[ 13877.388] (II) modeset(G0): Year: 2011  Week: 35
[ 13877.388] (II) modeset(G0): EDID Version: 1.3
[ 13877.388] (II) modeset(G0): Digital Display Input
[ 13877.388] (II) modeset(G0): Max Image Size [cm]: horiz.: 31  vert.: 17
[ 13877.388] (II) modeset(G0): Gamma: 2.20
[ 13877.388] (II) modeset(G0): No DPMS capabilities specified
[ 13877.388] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[ 13877.388] (II) modeset(G0): First detailed timing is preferred mode
[ 13877.388] (II) modeset(G0): redX: 0.608 redY: 0.349   greenX: 0.340 greenY: 0.556
[ 13877.388] (II) modeset(G0): blueX: 0.169 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
[ 13877.388] (II) modeset(G0): Manufacturer's mask: 0
[ 13877.388] (II) modeset(G0): Supported detailed timing:
[ 13877.388] (II) modeset(G0): clock: 69.3 MHz   Image Size:  309 x 174 mm
[ 13877.388] (II) modeset(G0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1466 h_border: 0
[ 13877.388] (II) modeset(G0): v_active: 768  v_sync: 769  v_sync_end 773 v_blanking: 788 v_border: 0
[ 13877.388] (II) modeset(G0):  N140BGE-L42
[ 13877.388] (II) modeset(G0):  CMN
[ 13877.388] (II) modeset(G0):  N140BGE-L42
[ 13877.388] (II) modeset(G0): EDID (in hex):
[ 13877.388] (II) modeset(G0): 	00ffffffffffff000dae721400000000
[ 13877.389] (II) modeset(G0): 	23150103801f11780ad1459b59578e2b
[ 13877.389] (II) modeset(G0): 	23505400000001010101010101010101
[ 13877.389] (II) modeset(G0): 	010101010101121b5664500014303020
[ 13877.389] (II) modeset(G0): 	140035ae10000018000000fe004e3134
[ 13877.389] (II) modeset(G0): 	304247452d4c34320a20000000fe0043
[ 13877.389] (II) modeset(G0): 	4d4e0a202020202020202020000000fe
[ 13877.389] (II) modeset(G0): 	004e3134304247452d4c34320a200006
[ 13877.389] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 13877.389] (II) modeset(G0): Modeline "1366x768"x60.0   69.30  1366 1414 1446 1466  768 769 773 788 -hsync -vsync (47.3 kHz eP)
[ 13877.389] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 13877.389] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 13877.394] (II) modeset(G0): EDID for output VGA-1-1
[ 13877.402] (II) modeset(G0): EDID for output HDMI-1-1
[ 13877.402] (II) modeset(G0): EDID for output DP-1-1
[ 13877.402] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 13877.402] (==) modeset(G0): DPI set to (96, 96)
[ 13877.402] (II) Loading sub module "fb"
[ 13877.402] (II) LoadModule: "fb"
[ 13877.402] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13877.402] (II) Module fb: vendor="X.Org Foundation"
[ 13877.403] 	compiled for 1.19.6, module version = 1.0.0
[ 13877.403] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 13877.403] (--) Depth 24 pixmap format is 32 bpp
[ 13877.481] (==) modeset(G0): Backing store enabled
[ 13877.481] (==) modeset(G0): Silken mouse enabled
[ 13877.481] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13877.510] (==) modeset(G0): DPMS enabled
[ 13877.511] (II) modeset(G0): [DRI2] Setup complete
[ 13877.511] (II) modeset(G0): [DRI2]   DRI driver: i965
[ 13877.511] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[ 13877.511] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 13877.511] (II) NVIDIA:     access.
[ 13877.536] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 13877.536] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[ 13877.536] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[ 13877.536] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[ 13877.536] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[ 13877.536] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[ 13877.536] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[ 13877.536] (II) NVIDIA(0):     Config Options in the README.
[ 13877.548] (II) NVIDIA(0): Setting mode "NULL"
[ 13877.556] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13877.556] (==) NVIDIA(0): Backing store enabled
[ 13877.556] (==) NVIDIA(0): Silken mouse enabled
[ 13877.556] (==) NVIDIA(0): DPMS enabled
[ 13877.556] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 13877.556] (II) Loading sub module "dri2"
[ 13877.556] (II) LoadModule: "dri2"
[ 13877.556] (II) Module "dri2" already built-in
[ 13877.556] (II) NVIDIA(0): [DRI2] Setup complete
[ 13877.556] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[ 13877.557] (--) RandR disabled
[ 13877.562] (II) Initializing extension GLX
[ 13877.562] (II) Indirect GLX disabled.
[ 13877.849] (II) modeset(G0): Damage tracking initialized
[ 13877.911] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13877.911] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13877.911] (II) LoadModule: "libinput"
[ 13877.911] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13877.913] (II) Module libinput: vendor="X.Org Foundation"
[ 13877.913] 	compiled for 1.19.3, module version = 0.26.0
[ 13877.913] 	Module class: X.Org XInput Driver
[ 13877.913] 	ABI class: X.Org XInput driver, version 24.1
[ 13877.913] (II) Using input driver 'libinput' for 'Power Button'
[ 13877.914] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[ 13877.914] (**) Power Button: always reports core events
[ 13877.914] (**) Option "Device" "/dev/input/event3"
[ 13877.914] (**) Option "_source" "server/udev"
[ 13877.915] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 13877.915] (II) event3  - (II) Power Button: (II) device is a keyboard
[ 13877.915] (II) event3  - (II) Power Button: (II) device removed
[ 13877.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 13877.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13877.916] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 13877.916] (II) event3  - (II) Power Button: (II) device is a keyboard
[ 13877.916] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[ 13877.916] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 13877.916] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 13877.917] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[ 13877.918] (**) Asus Wireless Radio Control: always reports core events
[ 13877.918] (**) Option "Device" "/dev/input/event4"
[ 13877.918] (**) Option "_source" "server/udev"
[ 13877.918] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[ 13877.918] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[ 13877.918] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[ 13877.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input8/event4"
[ 13877.919] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 13877.920] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[ 13877.920] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[ 13877.920] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 13877.921] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 13877.921] (II) Using input driver 'libinput' for 'Video Bus'
[ 13877.922] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[ 13877.922] (**) Video Bus: always reports core events
[ 13877.922] (**) Option "Device" "/dev/input/event7"
[ 13877.922] (**) Option "_source" "server/udev"
[ 13877.923] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 13877.923] (II) event7  - (II) Video Bus: (II) device is a keyboard
[ 13877.923] (II) event7  - (II) Video Bus: (II) device removed
[ 13877.923] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event7"
[ 13877.923] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 13877.924] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 13877.924] (II) event7  - (II) Video Bus: (II) device is a keyboard
[ 13877.925] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 13877.925] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 13877.925] (II) Using input driver 'libinput' for 'Video Bus'
[ 13877.926] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 43 paused 0
[ 13877.926] (**) Video Bus: always reports core events
[ 13877.926] (**) Option "Device" "/dev/input/event6"
[ 13877.926] (**) Option "_source" "server/udev"
[ 13877.927] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 13877.927] (II) event6  - (II) Video Bus: (II) device is a keyboard
[ 13877.927] (II) event6  - (II) Video Bus: (II) device removed
[ 13877.927] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14/event6"
[ 13877.927] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 13877.927] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 13877.927] (II) event6  - (II) Video Bus: (II) device is a keyboard
[ 13877.928] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 13877.928] (II) No input driver specified, ignoring this device.
[ 13877.928] (II) This device may have been added with another device file.
[ 13877.928] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 13877.928] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 13877.928] (II) Using input driver 'libinput' for 'Sleep Button'
[ 13877.929] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[ 13877.929] (**) Sleep Button: always reports core events
[ 13877.929] (**) Option "Device" "/dev/input/event2"
[ 13877.929] (**) Option "_source" "server/udev"
[ 13877.930] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 13877.930] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[ 13877.930] (II) event2  - (II) Sleep Button: (II) device removed
[ 13877.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 13877.930] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 13877.931] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 13877.931] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[ 13877.932] (II) config/udev: Adding input device USB Camera: USB 2.0 UVC HD Webc (/dev/input/event9)
[ 13877.932] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "libinput keyboard catchall"
[ 13877.932] (II) Using input driver 'libinput' for 'USB Camera: USB 2.0 UVC HD Webc'
[ 13877.933] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 45 paused 0
[ 13877.933] (**) USB Camera: USB 2.0 UVC HD Webc: always reports core events
[ 13877.933] (**) Option "Device" "/dev/input/event9"
[ 13877.933] (**) Option "_source" "server/udev"
[ 13877.934] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[ 13877.934] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[ 13877.934] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[ 13877.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input16/event9"
[ 13877.934] (II) XINPUT: Adding extended input device "USB Camera: USB 2.0 UVC HD Webc" (type: KEYBOARD, id 11)
[ 13877.934] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[ 13877.934] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[ 13877.935] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 13877.935] (II) No input driver specified, ignoring this device.
[ 13877.935] (II) This device may have been added with another device file.
[ 13877.935] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 13877.935] (II) No input driver specified, ignoring this device.
[ 13877.935] (II) This device may have been added with another device file.
[ 13877.935] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event10)
[ 13877.936] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 13877.936] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 13877.937] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 46 paused 0
[ 13877.937] (**) Asus WMI hotkeys: always reports core events
[ 13877.937] (**) Option "Device" "/dev/input/event10"
[ 13877.937] (**) Option "_source" "server/udev"
[ 13877.937] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 13877.937] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[ 13877.937] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[ 13877.937] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event10"
[ 13877.937] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 13877.938] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 13877.938] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[ 13877.939] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13877.939] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13877.939] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13877.940] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 47 paused 0
[ 13877.940] (**) AT Translated Set 2 keyboard: always reports core events
[ 13877.941] (**) Option "Device" "/dev/input/event0"
[ 13877.941] (**) Option "_source" "server/udev"
[ 13877.941] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 13877.941] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 13877.941] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[ 13877.941] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13877.941] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 13877.942] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 13877.942] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 13877.943] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 13877.943] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 13877.943] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[ 13877.943] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 13877.944] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 48 paused 0
[ 13877.944] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 13877.944] (**) Option "Device" "/dev/input/event8"
[ 13877.944] (**) Option "_source" "server/udev"
[ 13877.944] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[ 13877.944] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[ 13877.944] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[ 13877.944] (**) Option "Tapping" "on"
[ 13877.944] (**) Option "AccelSpeed" "0.5"
[ 13877.944] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event8"
[ 13877.944] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 13877.944] (**) Option "AccelerationScheme" "none"
[ 13877.945] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 13877.945] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 13877.945] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 13877.945] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[ 13877.945] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[ 13877.945] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 13877.945] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[ 13877.945] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 13877.945] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 13877.945] (**) Option "Device" "/dev/input/mouse0"
[ 13877.945] (**) Option "_source" "server/udev"
[ 13877.978] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[ 13877.978] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse0
[ 13877.978] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad"
[ 13877.978] (II) UnloadModule: "libinput"
[ 13877.979] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 13877.979] (II) No input driver specified, ignoring this device.
[ 13877.979] (II) This device may have been added with another device file.
[ 13879.745] (**) Option "fd" "38"
[ 13879.746] (II) event3  - (II) Power Button: (II) device removed
[ 13879.746] (**) Option "fd" "41"
[ 13879.746] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[ 13879.746] (**) Option "fd" "42"
[ 13879.746] (II) event7  - (II) Video Bus: (II) device removed
[ 13879.746] (**) Option "fd" "43"
[ 13879.746] (II) event6  - (II) Video Bus: (II) device removed
[ 13879.746] (**) Option "fd" "44"
[ 13879.746] (II) event2  - (II) Sleep Button: (II) device removed
[ 13879.746] (**) Option "fd" "45"
[ 13879.747] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[ 13879.747] (**) Option "fd" "46"
[ 13879.747] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[ 13879.747] (**) Option "fd" "47"
[ 13879.747] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[ 13879.747] (**) Option "fd" "48"
[ 13879.747] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[ 13879.753] (II) systemd-logind: got pause for 13:68
[ 13879.753] (II) systemd-logind: got pause for 13:71
[ 13879.753] (II) systemd-logind: got pause for 226:0
[ 13879.753] (II) systemd-logind: got pause for 13:74
[ 13879.754] (II) systemd-logind: got pause for 13:67
[ 13879.754] (II) systemd-logind: got pause for 13:70
[ 13879.754] (II) systemd-logind: got pause for 13:72
[ 13879.754] (II) systemd-logind: got pause for 13:66
[ 13879.755] (II) systemd-logind: got pause for 13:73
[ 13879.755] (II) systemd-logind: got pause for 13:64
[ 13903.616] (II) UnloadModule: "libinput"
[ 13903.616] (II) systemd-logind: releasing fd for 13:72
[ 13903.639] (II) UnloadModule: "libinput"
[ 13903.639] (II) systemd-logind: releasing fd for 13:64
[ 13903.659] (II) UnloadModule: "libinput"
[ 13903.659] (II) systemd-logind: releasing fd for 13:74
[ 13903.675] (II) UnloadModule: "libinput"
[ 13903.675] (II) systemd-logind: releasing fd for 13:73
[ 13903.695] (II) UnloadModule: "libinput"
[ 13903.695] (II) systemd-logind: releasing fd for 13:66
[ 13903.713] (II) UnloadModule: "libinput"
[ 13903.713] (II) systemd-logind: releasing fd for 13:70
[ 13903.739] (II) UnloadModule: "libinput"
[ 13903.739] (II) systemd-logind: releasing fd for 13:71
[ 13903.759] (II) UnloadModule: "libinput"
[ 13903.759] (II) systemd-logind: releasing fd for 13:68
[ 13903.776] (II) UnloadModule: "libinput"
[ 13903.776] (II) systemd-logind: releasing fd for 13:67
[ 13903.839] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 13903.850] (II) Server terminated successfully (0). Closing log file.

and here a log for xfce4 that idk how it could've worked either

[ 14451.233] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 14451.237] X Protocol Version 11, Revision 0
[ 14451.238] Build Operating System: Linux 4.9.71-1-lts x86_64 
[ 14451.239] Current Operating System: Linux a3-laptop 4.14.14-1-ARCH #1 SMP PREEMPT Fri Jan 19 18:42:04 UTC 2018 x86_64
[ 14451.239] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5c06e9aa-0d84-4e96-8766-f3e4f9e37fd7 rw quiet
[ 14451.242] Build Date: 25 December 2017  02:02:38PM
[ 14451.244]  
[ 14451.245] Current version of pixman: 0.34.0
[ 14451.247] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 14451.247] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14451.254] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Jan 23 16:37:24 2018
[ 14451.256] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14451.258] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14451.258] (==) No Layout section.  Using the first Screen section.
[ 14451.258] (==) No screen section available. Using defaults.
[ 14451.258] (**) |-->Screen "Default Screen Section" (0)
[ 14451.258] (**) |   |-->Monitor "<default monitor>"
[ 14451.258] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 14451.258] (==) Automatically adding devices
[ 14451.258] (==) Automatically enabling devices
[ 14451.258] (==) Automatically adding GPU devices
[ 14451.258] (==) Automatically binding GPU devices
[ 14451.258] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 14451.258] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 14451.258] 	Entry deleted from font path.
[ 14451.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14451.258] 	Entry deleted from font path.
[ 14451.258] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14451.258] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14451.258] 	Entry deleted from font path.
[ 14451.258] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14451.258] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[ 14451.258] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14451.258] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14451.258] (II) Loader magic: 0x558d3497dd60
[ 14451.258] (II) Module ABI versions:
[ 14451.258] 	X.Org ANSI C Emulation: 0.4
[ 14451.259] 	X.Org Video Driver: 23.0
[ 14451.259] 	X.Org XInput driver : 24.1
[ 14451.259] 	X.Org Server Extension : 10.0
[ 14451.260] (++) using VT number 3

[ 14451.260] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 14451.262] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 14451.263] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 14451.264] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 14451.265] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14451.266] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 14451.268] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 14451.268] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 14451.269] (--) PCI: (0:0:2:0) 8086:0166:1043:100d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 14451.269] (--) PCI:*(0:1:0:0) 10de:0fdf:1043:100d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14451.269] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14451.269] (II) LoadModule: "glx"
[ 14451.270] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 14451.274] (II) Module glx: vendor="NVIDIA Corporation"
[ 14451.274] 	compiled for 4.0.2, module version = 1.0.0
[ 14451.274] 	Module class: X.Org Server Extension
[ 14451.274] (II) NVIDIA GLX Module  387.34  Tue Nov 21 02:04:31 PST 2017
[ 14451.274] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 14451.274] 	loading driver: nvidia
[ 14451.274] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 14451.274] 	loading driver: modesetting
[ 14451.274] (==) Matched nvidia as autoconfigured driver 0
[ 14451.274] (==) Matched nouveau as autoconfigured driver 1
[ 14451.274] (==) Matched nv as autoconfigured driver 2
[ 14451.274] (==) Matched modesetting as autoconfigured driver 3
[ 14451.274] (==) Matched intel as autoconfigured driver 4
[ 14451.274] (==) Matched nouveau as autoconfigured driver 5
[ 14451.274] (==) Matched nv as autoconfigured driver 6
[ 14451.274] (==) Matched modesetting as autoconfigured driver 7
[ 14451.274] (==) Matched fbdev as autoconfigured driver 8
[ 14451.274] (==) Matched vesa as autoconfigured driver 9
[ 14451.274] (==) Assigned the driver to the xf86ConfigLayout
[ 14451.274] (II) LoadModule: "nvidia"
[ 14451.275] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14451.275] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14451.275] 	compiled for 4.0.2, module version = 1.0.0
[ 14451.275] 	Module class: X.Org Video Driver
[ 14451.275] (II) LoadModule: "nouveau"
[ 14451.276] (WW) Warning, couldn't open module nouveau
[ 14451.276] (II) UnloadModule: "nouveau"
[ 14451.276] (II) Unloading nouveau
[ 14451.276] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 14451.276] (II) LoadModule: "nv"
[ 14451.276] (WW) Warning, couldn't open module nv
[ 14451.276] (II) UnloadModule: "nv"
[ 14451.276] (II) Unloading nv
[ 14451.276] (EE) Failed to load module "nv" (module does not exist, 0)
[ 14451.276] (II) LoadModule: "modesetting"
[ 14451.276] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14451.276] (II) Module modesetting: vendor="X.Org Foundation"
[ 14451.276] 	compiled for 1.19.6, module version = 1.19.6
[ 14451.276] 	Module class: X.Org Video Driver
[ 14451.276] 	ABI class: X.Org Video Driver, version 23.0
[ 14451.276] (II) LoadModule: "intel"
[ 14451.277] (WW) Warning, couldn't open module intel
[ 14451.277] (II) UnloadModule: "intel"
[ 14451.277] (II) Unloading intel
[ 14451.277] (EE) Failed to load module "intel" (module does not exist, 0)
[ 14451.277] (II) LoadModule: "fbdev"
[ 14451.277] (WW) Warning, couldn't open module fbdev
[ 14451.277] (II) UnloadModule: "fbdev"
[ 14451.277] (II) Unloading fbdev
[ 14451.277] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14451.277] (II) LoadModule: "vesa"
[ 14451.278] (WW) Warning, couldn't open module vesa
[ 14451.278] (II) UnloadModule: "vesa"
[ 14451.278] (II) Unloading vesa
[ 14451.278] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 14451.278] (II) NVIDIA dlloader X Driver  387.34  Tue Nov 21 01:38:22 PST 2017
[ 14451.278] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14451.278] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 14451.278] (II) systemd-logind: releasing fd for 226:1
[ 14451.279] (II) Loading sub module "fb"
[ 14451.279] (II) LoadModule: "fb"
[ 14451.279] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14451.279] (II) Module fb: vendor="X.Org Foundation"
[ 14451.279] 	compiled for 1.19.6, module version = 1.0.0
[ 14451.279] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 14451.279] (II) Loading sub module "wfb"
[ 14451.279] (II) LoadModule: "wfb"
[ 14451.279] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14451.280] (II) Module wfb: vendor="X.Org Foundation"
[ 14451.280] 	compiled for 1.19.6, module version = 1.0.0
[ 14451.280] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 14451.280] (II) Loading sub module "ramdac"
[ 14451.280] (II) LoadModule: "ramdac"
[ 14451.280] (II) Module "ramdac" already built-in
[ 14451.280] (WW) Falling back to old probe method for modesetting
[ 14451.280] (II) modeset(G0): using drv /dev/dri/card0
[ 14451.280] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 14451.280] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 14451.280] (==) NVIDIA(0): RGB weight 888
[ 14451.280] (==) NVIDIA(0): Default visual is TrueColor
[ 14451.281] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14451.281] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 14451.281] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 14451.281] (**) NVIDIA(0): Enabling 2D acceleration
[ 14451.285] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK107) at PCI:1:0:0 (GPU-0)
[ 14451.285] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 14451.285] (--) NVIDIA(0): VideoBIOS: 80.07.90.00.02
[ 14451.285] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14451.285] (II) NVIDIA(0): Validated MetaModes:
[ 14451.285] (II) NVIDIA(0):     "NULL"
[ 14451.285] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 14451.285] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 14451.285] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 14451.285] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 14451.285] (==) modeset(G0): RGB weight 888
[ 14451.285] (==) modeset(G0): Default visual is TrueColor
[ 14451.285] (II) Loading sub module "glamoregl"
[ 14451.285] (II) LoadModule: "glamoregl"
[ 14451.285] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 14451.286] (II) Module glamoregl: vendor="X.Org Foundation"
[ 14451.286] 	compiled for 1.19.6, module version = 1.0.0
[ 14451.286] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 14451.286] (II) glamor: OpenGL accelerated X.org driver based.
[ 14451.303] (II) glamor: EGL version 1.4 (DRI2):
[ 14451.307] (II) modeset(G0): glamor initialized
[ 14451.307] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 14451.312] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 14451.320] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 14451.320] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 14451.321] (II) modeset(G0): EDID for output LVDS-1-1
[ 14451.321] (II) modeset(G0): Manufacturer: CMN  Model: 1472  Serial#: 0
[ 14451.321] (II) modeset(G0): Year: 2011  Week: 35
[ 14451.321] (II) modeset(G0): EDID Version: 1.3
[ 14451.321] (II) modeset(G0): Digital Display Input
[ 14451.321] (II) modeset(G0): Max Image Size [cm]: horiz.: 31  vert.: 17
[ 14451.321] (II) modeset(G0): Gamma: 2.20
[ 14451.321] (II) modeset(G0): No DPMS capabilities specified
[ 14451.321] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[ 14451.321] (II) modeset(G0): First detailed timing is preferred mode
[ 14451.321] (II) modeset(G0): redX: 0.608 redY: 0.349   greenX: 0.340 greenY: 0.556
[ 14451.321] (II) modeset(G0): blueX: 0.169 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
[ 14451.321] (II) modeset(G0): Manufacturer's mask: 0
[ 14451.321] (II) modeset(G0): Supported detailed timing:
[ 14451.321] (II) modeset(G0): clock: 69.3 MHz   Image Size:  309 x 174 mm
[ 14451.321] (II) modeset(G0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1466 h_border: 0
[ 14451.321] (II) modeset(G0): v_active: 768  v_sync: 769  v_sync_end 773 v_blanking: 788 v_border: 0
[ 14451.321] (II) modeset(G0):  N140BGE-L42
[ 14451.321] (II) modeset(G0):  CMN
[ 14451.321] (II) modeset(G0):  N140BGE-L42
[ 14451.321] (II) modeset(G0): EDID (in hex):
[ 14451.321] (II) modeset(G0): 	00ffffffffffff000dae721400000000
[ 14451.321] (II) modeset(G0): 	23150103801f11780ad1459b59578e2b
[ 14451.321] (II) modeset(G0): 	23505400000001010101010101010101
[ 14451.321] (II) modeset(G0): 	010101010101121b5664500014303020
[ 14451.321] (II) modeset(G0): 	140035ae10000018000000fe004e3134
[ 14451.321] (II) modeset(G0): 	304247452d4c34320a20000000fe0043
[ 14451.321] (II) modeset(G0): 	4d4e0a202020202020202020000000fe
[ 14451.321] (II) modeset(G0): 	004e3134304247452d4c34320a200006
[ 14451.321] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 14451.321] (II) modeset(G0): Modeline "1366x768"x60.0   69.30  1366 1414 1446 1466  768 769 773 788 -hsync -vsync (47.3 kHz eP)
[ 14451.321] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 14451.322] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 14451.327] (II) modeset(G0): EDID for output VGA-1-1
[ 14451.334] (II) modeset(G0): EDID for output HDMI-1-1
[ 14451.335] (II) modeset(G0): EDID for output DP-1-1
[ 14451.335] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 14451.335] (==) modeset(G0): DPI set to (96, 96)
[ 14451.335] (II) Loading sub module "fb"
[ 14451.335] (II) LoadModule: "fb"
[ 14451.336] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14451.336] (II) Module fb: vendor="X.Org Foundation"
[ 14451.336] 	compiled for 1.19.6, module version = 1.0.0
[ 14451.336] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 14451.336] (--) Depth 24 pixmap format is 32 bpp
[ 14451.413] (==) modeset(G0): Backing store enabled
[ 14451.413] (==) modeset(G0): Silken mouse enabled
[ 14451.413] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14451.442] (==) modeset(G0): DPMS enabled
[ 14451.442] (II) modeset(G0): [DRI2] Setup complete
[ 14451.442] (II) modeset(G0): [DRI2]   DRI driver: i965
[ 14451.442] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[ 14451.443] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 14451.443] (II) NVIDIA:     access.
[ 14451.465] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14451.465] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[ 14451.465] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[ 14451.465] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[ 14451.465] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[ 14451.465] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[ 14451.465] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[ 14451.465] (II) NVIDIA(0):     Config Options in the README.
[ 14451.475] (II) NVIDIA(0): Setting mode "NULL"
[ 14451.480] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14451.480] (==) NVIDIA(0): Backing store enabled
[ 14451.480] (==) NVIDIA(0): Silken mouse enabled
[ 14451.480] (==) NVIDIA(0): DPMS enabled
[ 14451.480] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 14451.480] (II) Loading sub module "dri2"
[ 14451.480] (II) LoadModule: "dri2"
[ 14451.480] (II) Module "dri2" already built-in
[ 14451.480] (II) NVIDIA(0): [DRI2] Setup complete
[ 14451.480] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[ 14451.481] (--) RandR disabled
[ 14451.483] (II) Initializing extension GLX
[ 14451.483] (II) Indirect GLX disabled.
[ 14451.765] (II) modeset(G0): Damage tracking initialized
[ 14451.824] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14451.824] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 14451.824] (II) LoadModule: "libinput"
[ 14451.824] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 14451.826] (II) Module libinput: vendor="X.Org Foundation"
[ 14451.826] 	compiled for 1.19.3, module version = 0.26.0
[ 14451.826] 	Module class: X.Org XInput Driver
[ 14451.826] 	ABI class: X.Org XInput driver, version 24.1
[ 14451.826] (II) Using input driver 'libinput' for 'Power Button'
[ 14451.827] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[ 14451.827] (**) Power Button: always reports core events
[ 14451.827] (**) Option "Device" "/dev/input/event3"
[ 14451.827] (**) Option "_source" "server/udev"
[ 14451.828] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 14451.828] (II) event3  - (II) Power Button: (II) device is a keyboard
[ 14451.828] (II) event3  - (II) Power Button: (II) device removed
[ 14451.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 14451.828] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14451.829] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 14451.829] (II) event3  - (II) Power Button: (II) device is a keyboard
[ 14451.830] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[ 14451.830] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 14451.830] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 14451.831] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[ 14451.831] (**) Asus Wireless Radio Control: always reports core events
[ 14451.831] (**) Option "Device" "/dev/input/event4"
[ 14451.831] (**) Option "_source" "server/udev"
[ 14451.832] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[ 14451.832] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[ 14451.832] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[ 14451.832] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input8/event4"
[ 14451.832] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 14451.833] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[ 14451.833] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[ 14451.834] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 14451.834] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 14451.834] (II) Using input driver 'libinput' for 'Video Bus'
[ 14451.835] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[ 14451.835] (**) Video Bus: always reports core events
[ 14451.835] (**) Option "Device" "/dev/input/event7"
[ 14451.835] (**) Option "_source" "server/udev"
[ 14451.835] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 14451.835] (II) event7  - (II) Video Bus: (II) device is a keyboard
[ 14451.835] (II) event7  - (II) Video Bus: (II) device removed
[ 14451.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event7"
[ 14451.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 14451.836] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 14451.836] (II) event7  - (II) Video Bus: (II) device is a keyboard
[ 14451.836] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 14451.836] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 14451.836] (II) Using input driver 'libinput' for 'Video Bus'
[ 14451.837] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 43 paused 0
[ 14451.837] (**) Video Bus: always reports core events
[ 14451.837] (**) Option "Device" "/dev/input/event6"
[ 14451.837] (**) Option "_source" "server/udev"
[ 14451.838] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 14451.838] (II) event6  - (II) Video Bus: (II) device is a keyboard
[ 14451.838] (II) event6  - (II) Video Bus: (II) device removed
[ 14451.838] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14/event6"
[ 14451.838] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 14451.839] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 14451.839] (II) event6  - (II) Video Bus: (II) device is a keyboard
[ 14451.840] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 14451.840] (II) No input driver specified, ignoring this device.
[ 14451.840] (II) This device may have been added with another device file.
[ 14451.840] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 14451.840] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 14451.840] (II) Using input driver 'libinput' for 'Sleep Button'
[ 14451.841] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[ 14451.841] (**) Sleep Button: always reports core events
[ 14451.841] (**) Option "Device" "/dev/input/event2"
[ 14451.841] (**) Option "_source" "server/udev"
[ 14451.842] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 14451.842] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[ 14451.842] (II) event2  - (II) Sleep Button: (II) device removed
[ 14451.842] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 14451.842] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 14451.843] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 14451.843] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[ 14451.844] (II) config/udev: Adding input device USB Camera: USB 2.0 UVC HD Webc (/dev/input/event9)
[ 14451.844] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "libinput keyboard catchall"
[ 14451.844] (II) Using input driver 'libinput' for 'USB Camera: USB 2.0 UVC HD Webc'
[ 14451.845] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 45 paused 0
[ 14451.845] (**) USB Camera: USB 2.0 UVC HD Webc: always reports core events
[ 14451.845] (**) Option "Device" "/dev/input/event9"
[ 14451.845] (**) Option "_source" "server/udev"
[ 14451.846] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[ 14451.846] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[ 14451.846] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[ 14451.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input16/event9"
[ 14451.846] (II) XINPUT: Adding extended input device "USB Camera: USB 2.0 UVC HD Webc" (type: KEYBOARD, id 11)
[ 14451.846] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) is tagged by udev as: Keyboard
[ 14451.846] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device is a keyboard
[ 14451.847] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 14451.847] (II) No input driver specified, ignoring this device.
[ 14451.847] (II) This device may have been added with another device file.
[ 14451.847] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 14451.847] (II) No input driver specified, ignoring this device.
[ 14451.847] (II) This device may have been added with another device file.
[ 14451.847] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event10)
[ 14451.847] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 14451.847] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 14451.848] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 46 paused 0
[ 14451.848] (**) Asus WMI hotkeys: always reports core events
[ 14451.848] (**) Option "Device" "/dev/input/event10"
[ 14451.848] (**) Option "_source" "server/udev"
[ 14451.849] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 14451.849] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[ 14451.849] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[ 14451.849] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event10"
[ 14451.849] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 14451.849] (II) event10 - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 14451.849] (II) event10 - (II) Asus WMI hotkeys: (II) device is a keyboard
[ 14451.850] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14451.850] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 14451.850] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 14451.851] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 47 paused 0
[ 14451.851] (**) AT Translated Set 2 keyboard: always reports core events
[ 14451.851] (**) Option "Device" "/dev/input/event0"
[ 14451.851] (**) Option "_source" "server/udev"
[ 14451.851] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 14451.851] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 14451.851] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[ 14451.851] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14451.851] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 14451.852] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 14451.852] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 14451.852] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 14451.852] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 14451.852] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[ 14451.852] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 14451.853] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 48 paused 0
[ 14451.853] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 14451.853] (**) Option "Device" "/dev/input/event8"
[ 14451.853] (**) Option "_source" "server/udev"
[ 14451.854] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[ 14451.854] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[ 14451.854] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[ 14451.854] (**) Option "Tapping" "on"
[ 14451.854] (**) Option "AccelSpeed" "0.5"
[ 14451.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event8"
[ 14451.854] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 14451.854] (**) Option "AccelerationScheme" "none"
[ 14451.854] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 14451.854] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 14451.854] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 14451.855] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[ 14451.855] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[ 14451.855] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 14451.855] (**) ETPS/2 Elantech Touchpad: Applying InputClass "10"
[ 14451.855] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 14451.855] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 14451.855] (**) Option "Device" "/dev/input/mouse0"
[ 14451.855] (**) Option "_source" "server/udev"
[ 14451.911] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[ 14451.912] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse0
[ 14451.912] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad"
[ 14451.912] (II) UnloadModule: "libinput"
[ 14451.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 14451.913] (II) No input driver specified, ignoring this device.
[ 14451.913] (II) This device may have been added with another device file.
[ 14452.329] randr: falling back to unsynchronized pixmap sharing
[ 14456.837] (**) Option "fd" "38"
[ 14456.837] (II) event3  - (II) Power Button: (II) device removed
[ 14456.837] (**) Option "fd" "41"
[ 14456.837] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[ 14456.837] (**) Option "fd" "42"
[ 14456.837] (II) event7  - (II) Video Bus: (II) device removed
[ 14456.838] (**) Option "fd" "43"
[ 14456.838] (II) event6  - (II) Video Bus: (II) device removed
[ 14456.838] (**) Option "fd" "44"
[ 14456.838] (II) event2  - (II) Sleep Button: (II) device removed
[ 14456.838] (**) Option "fd" "45"
[ 14456.839] (II) event9  - (II) USB Camera: USB 2.0 UVC HD Webc: (II) device removed
[ 14456.839] (**) Option "fd" "46"
[ 14456.839] (II) event10 - (II) Asus WMI hotkeys: (II) device removed
[ 14456.839] (**) Option "fd" "47"
[ 14456.839] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[ 14456.839] (**) Option "fd" "48"
[ 14456.839] (II) event8  - (II) ETPS/2 Elantech Touchpad: (II) device removed
[ 14457.125] (II) UnloadModule: "libinput"
[ 14457.125] (II) systemd-logind: releasing fd for 13:72
[ 14457.148] (II) UnloadModule: "libinput"
[ 14457.148] (II) systemd-logind: releasing fd for 13:64
[ 14457.172] (II) UnloadModule: "libinput"
[ 14457.172] (II) systemd-logind: releasing fd for 13:74
[ 14457.198] (II) UnloadModule: "libinput"
[ 14457.199] (II) systemd-logind: releasing fd for 13:73
[ 14457.228] (II) UnloadModule: "libinput"
[ 14457.228] (II) systemd-logind: releasing fd for 13:66
[ 14457.248] (II) UnloadModule: "libinput"
[ 14457.248] (II) systemd-logind: releasing fd for 13:70
[ 14457.265] (II) UnloadModule: "libinput"
[ 14457.265] (II) systemd-logind: releasing fd for 13:71
[ 14457.285] (II) UnloadModule: "libinput"
[ 14457.285] (II) systemd-logind: releasing fd for 13:68
[ 14457.302] (II) UnloadModule: "libinput"
[ 14457.302] (II) systemd-logind: releasing fd for 13:67
[ 14457.329] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 14457.808] (II) Server terminated successfully (0). Closing log file.

B1omman · 2018-01-23 10:01:44

Nvidia Optimus is, afaik, not very consistent in how to get it working.

You could try to copy the xorg.conf from latest documentation for Nvidia driver at http://us.download.nvidia.com/XFree86/L … ndr14.html, to.
I suggest you follow the wiki on how to create the ~/.xinitrc, by copying the default from /etc/X11/xinit/xinitrc and modify for what you need.
Follow the advice given by seth in step 5, Bumblebee might solve some issues as it have for others.
You could also check your bios/uefi if it's possible to disable the integrated graphics adapter and only run the Nvidia adapter.
As for the xrandr commands, try them out after reading the documentation I linked in the beginning.

Please provide the output from dmesg after a failed startx attempt as well.

Also, check for pages like these, they generally help:
https://wiki.archlinux.org/index.php/NV … leshooting

Trilby · 2018-01-23 11:44:07

Congratulations. Removing the bad xorg conf solved your problem. Look at the last line of your xorg log: it worked fine.

Now just follow the article on making an ~/.xinitrc and you're set.

seth · 2018-01-23 15:12:48

He didn't run into a failing X11 server but a "turned off" output.
Since the nvidia ddx driver is still loaded, this is however no dynamic setup (bumblebee) nor is his previous/now setting is complete or correct - the setprovideroutputsource call has no source parameter.
The auto config tries to use nvidia as VGA device but it's only a 3D accelerator.

@as3mbus you first need to determine which kind of setup you want (run everything through the nvidia chip all the time or only invoke it on demand) and then follow the wiki on the desired setup.

Trilby · 2018-01-23 15:22:36

Ooops, sorry. Just the same though, without twm and xterm installed, and without an ~/.xinitrc, that test could not really show if the display was working: nothing would be expected to show up.

as3mbus · 2018-01-24 08:59:11

ok finally got it working, and maybe i got more understanding from my issue.
so basically i'm doing fine way before,
ayakat already said that .xinitrc arent executed when calling a command dirrectly from startx and xinit.
so any xrandr that i set on xinitrc wont be called everytime i call a command after startx/ xinit.
and from trilby post i realize that i dont even need any configuration file for nvidia graphic which is basically clumped up more stuff instead of keeping everything simple.

and today i got it working by following b1omman instruction to copy entire /etc/X11/xinit/xinitrc to /xinitrc and add those xrandr before any exec.

thank you for your help.
it seems this issue is entirely my fault for not understanding the wiki thoroughly, but it does hard to understand since english isnt my native language, and i miss some few words i didnt understand before.

another question is. should i create a script for every application i want to run on a single xserver ?
or is there another way so i can call .xinitrc before calling my application through startx or xinit ?

B1omman · 2018-01-25 04:49:56

as3mbus wrote:

ok finally got it working, and maybe i got more understanding from my issue.

Good, now go ahead and mark the topic as solved.

as3mbus wrote:

... not understanding the wiki thoroughly, but it does hard to understand since english isnt my native language, and i miss some few words i didnt understand before.

Most wiki pages have been translated to other languages, check the left panel in the wiki if you can find your native language.

as3mbus wrote:

another question is. should i create a script for every application i want to run on a single xserver ?
or is there another way so i can call .xinitrc before calling my application through startx or xinit ?

I don't really understand what you want to do. Do you want to run all applications in separate xservers, or do you want to have the same ~/.xinitrc for different WMs? Either way, the wiki page for xinit have the answers:
https://wiki.archlinux.org/index.php/Xi … and_tricks
Unless you want something like:
https://wiki.archlinux.org/index.php/Ga … e_X_server
Or, are you asking how to launch applications from i3?
https://wiki.archlinux.org/index.php/I3 … n_launcher

Try to read through that, understand what you try to achieve and try to achieve it. If you run into problems you should start a new topic in the forums, but include relevant logs, scripts and configurations from the beginning.

Arch Linux

#1 2018-01-22 06:09:57

[SOLVED] I cant start my i3 WM, but the other desktop work fine

#2 2018-01-22 06:58:51

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#3 2018-01-22 07:25:31

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#4 2018-01-22 08:41:45

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#5 2018-01-22 10:35:13

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#6 2018-01-22 12:41:37

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#7 2018-01-22 13:11:30

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#8 2018-01-22 13:26:50

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#9 2018-01-22 13:30:54

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#10 2018-01-22 13:42:08

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#11 2018-01-22 17:00:43

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#12 2018-01-23 02:58:14

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#13 2018-01-23 05:09:17

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#14 2018-01-23 07:48:36

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#15 2018-01-23 08:49:04

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#16 2018-01-23 09:44:18

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#17 2018-01-23 10:01:44

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#18 2018-01-23 11:44:07

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#19 2018-01-23 15:12:48

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#20 2018-01-23 15:22:36

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#21 2018-01-24 08:59:11

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

#22 2018-01-25 04:49:56

Re: [SOLVED] I cant start my i3 WM, but the other desktop work fine

Board footer