You are not logged in.
- Topics: Active | Unanswered
#1 2018-01-22 13:45:41
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
[SOLVED] Elantech touchpad is not working nor detected
Hello Arch community!
It's not too late so I wish you all a happy, healthy and successful 2018.
I generally read a lot of forum post and wiki page to find a solution but for the first time in a long time, I can't find a working solution...
I just acquired a Lenovo Ideapad 320 17ABR and I just want to paradoxically say for the first time that hopefully, I did not delete Windows partition yet. So to understand the problem here's the short context: I just installed arch in dual boot just to check if everything is working before erasing the windows partition and it appears that the touchpad is not working nor detected.
I searched under Windows which one it was and it was mentioned that it is an Elantech. So I searched for a solution around the web but none of them could work ... Their conclusion always ended with "building a custom kernel or update the kernel" but their distributions were not Arch and/or their kernel were at the time of their issues >4.x or > 4.10.x. So I need some help in order to fix and understand that inconvenient issue ...
___________________________________________________
I followed the following instructions but nothing actually worked:
Libinput Wiki page
If a touchpad device is not detected and shown as a device at all, a possible solution might be using one or more of these kernel parameters.
i8042.noloop i8042.nomux i8042.nopnp i8042.reset
Please note that as mentioned here I also tried the following kernel parameters without success.
i8042.kbdreset=1Modprobe
In many cases, in my search, it was mentioned that modprobing works but not in my case when I tried the following
# modprobe -r psmouse
# modprobe psmouse proto=impsIt was also not working without any protocol
# modprobe psmouse___________________________________________________
Complementary informations
My current linux version :
# uname -srvm
Linux 4.14.13-1-ARCH #1 SMP PREEMPT Wed Jan 10 11:14:50 UTC 2018 x86_64As you can see in the following, the touchpad is not detected :
# xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Microsoft Microsoft Nano Transceiver 1.1 id=10 [slave pointer (2)]
⎜ ↳ Microsoft Microsoft Nano Transceiver 1.1 id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Microsoft Microsoft Nano Transceiver 1.1 id=9 [slave keyboard (3)]
↳ EasyCamera: EasyCamera id=12 [slave keyboard (3)]
↳ Ideapad extra buttons id=13 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ Microsoft Microsoft Nano Transceiver 1.1 id=15 [slave keyboard (3)]# synclient
Couldn't find synaptics properties. No synaptics driver loaded?I also run the following but when clicking or tapping with the touchpad no action/event occured.
# libinput debug-eventsI hope that someone can take the time to read this and suggest a possible fix or help me find a solution.
Thanks in advance,
Funilrys
P.S: If I forgot to mention something please let me know.
Last edited by funilrys (2018-01-25 15:11:52)
Offline
#2 2018-01-22 13:51:29
- Slithery
- Administrator
- From: Norfolk, UK
- Registered: 2013-12-01
- Posts: 5,776
Re: [SOLVED] Elantech touchpad is not working nor detected
The outputs of lspci and lsusb would be useful to pin down exactly which hardware you have.
Offline
#3 2018-01-22 13:54:08
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Thanks for your answer @slithery
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev c8)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1578
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157d
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Device 157a
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1570
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1571
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1572
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1573
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1574
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1575
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)# lsusb
Bus 001 Device 004: ID 174f:241a Syntek
Bus 001 Device 003: ID 0cf3:e500 Qualcomm Atheros Communications
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 045e:07fd Microsoft Corp. Nano Transceiver 1.1
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubOffline
#4 2018-01-22 16:00:40
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,045
Re: [SOLVED] Elantech touchpad is not working nor detected
Please post the system's dmesg as well.
Offline
#5 2018-01-22 17:18:06
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Thanks for your answer @loqs
# dmesg
[ 0.000000] Linux version 4.14.13-1-ARCH (builduser@heftig-32336) (gcc version 7.2.1 20171224 (GCC)) #1 SMP PREEMPT Wed Jan 10 11:14:50 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bd44ba84-e92b-4226-b81d-67e63a2cf114 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d8a06fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8a07000-0x00000000d8c06fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d8c07000-0x00000000ddc06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddc07000-0x00000000ddd26fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddd27000-0x00000000ddda6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddda7000-0x00000000ddda8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddda9000-0x00000000de1abfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de1ac000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0a00000-0x00000000f0afffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xddda6000 ACPI 2.0=0xddda6014 SMBIOS=0xdba95000 SMBIOS 3.0=0xdba92000 ESRT=0xdba77000
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 80YN/LNVNB161216, BIOS 5QCN16WW 05/22/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ff000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000000] 4 base 0000FED80000 mask FFFFFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000dba77000 to 0x00000000dba77038.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff890540099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2e62a000, 0x2e62afff] PGTABLE
[ 0.000000] BRK [0x2e62b000, 0x2e62bfff] PGTABLE
[ 0.000000] BRK [0x2e62c000, 0x2e62cfff] PGTABLE
[ 0.000000] BRK [0x2e62d000, 0x2e62dfff] PGTABLE
[ 0.000000] BRK [0x2e62e000, 0x2e62efff] PGTABLE
[ 0.000000] BRK [0x2e62f000, 0x2e62ffff] PGTABLE
[ 0.000000] BRK [0x2e630000, 0x2e630fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x35f85000-0x36fb9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DDDA6014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DDD6F188 0000CC (v01 LENOVO CB-01 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000DDDA3000 00010C (v05 LENOVO CB-01 00000003 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DDD96000 0087C4 (v01 LENOVO AMD 00001000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DDCD3000 000040
[ 0.000000] ACPI: UEFI 0x00000000DDCD6000 000042 (v01 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.000000] ACPI: HPET 0x00000000DDDA2000 000038 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x00000000DDDA1000 000090 (v02 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DDDA0000 00003C (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: SBST 0x00000000DDD9F000 000030 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x00000000DDD94000 000055 (v03 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x00000000DDD93000 00004A (v02 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DDD89000 008896 (v02 LENOVO AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: IVRS 0x00000000DDD88000 0000B0 (v02 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: CRAT 0x00000000DDD87000 000550 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: VFCT 0x00000000DDD77000 00FE84 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: TPM2 0x00000000DDD76000 000034 (v03 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DDD95000 000607 (v01 LENOVO Tpm2Tabl 00009999 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDDA4000 0003E2 (v02 LENOVO Tpm2Tabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDD92000 0009F8 (v01 LENOVO AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DDD74000 001699 (v01 LENOVO CPMDFIGP 00000001 INTL 20120711)
[ 0.000000] ACPI: FPDT 0x00000000DDD73000 000034 (v01 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DDD71000 001769 (v01 LENOVO CPMCMN 00000001 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000DDD70000 000038 (v01 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DDCCD000 000102 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001feffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1feffa000-0x1feffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001feffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000086fff]
[ 0.000000] node 0: [mem 0x0000000000088000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d8a06fff]
[ 0.000000] node 0: [mem 0x00000000ddda7000-0x00000000ddda8fff]
[ 0.000000] node 0: [mem 0x00000000de1ac000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001feffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff]
[ 0.000000] On node 0 totalpages: 1937402
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13890 pages used for memmap
[ 0.000000] DMA32 zone: 888925 pages, LIFO batch:31
[ 0.000000] Normal zone: 16320 pages used for memmap
[ 0.000000] Normal zone: 1044480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8a07000-0xd8c06fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8c07000-0xddc06fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddc07000-0xddd26fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd27000-0xddda6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddda9000-0xde1abfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf09fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0a00000-0xf0afffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0b00000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf09fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff89073ec00000 s134168 r8192 d29672 u524288
[ 0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1907106
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bd44ba84-e92b-4226-b81d-67e63a2cf114 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7439324K/7749608K available (10252K kernel code, 1157K rwdata, 2788K rodata, 1348K init, 992K bss, 310284K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 29110 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2694.949 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5392.47 BogoMIPS (lpj=8983163)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.012190] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.013113] Security Framework initialized
[ 0.013116] Yama: becoming mindful.
[ 0.015585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016830] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016886] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017189] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.017197] CPU: Physical Processor ID: 0
[ 0.017197] CPU: Processor Core ID: 0
[ 0.017209] mce: CPU supports 7 MCE banks
[ 0.017217] LVT offset 1 assigned for vector 0xf9
[ 0.017223] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.017224] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.017318] Freeing SMP alternatives memory: 24K
[ 0.020420] smpboot: Max logical packages: 1
[ 0.021787] [Firmware Bug]: AMD-Vi: IOAPIC[4] not in IVRS table
[ 0.021795] [Firmware Bug]: AMD-Vi: IOAPIC[5] not in IVRS table
[ 0.021797] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[ 0.021799] AMD-Vi: Disabling interrupt remapping
[ 0.022318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056666] smpboot: CPU0: AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G (family: 0x15, model: 0x65, stepping: 0x1)
[ 0.066769] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.066779] ... version: 0
[ 0.066780] ... bit width: 48
[ 0.066780] ... generic registers: 6
[ 0.066781] ... value mask: 0000ffffffffffff
[ 0.066781] ... max period: 00007fffffffffff
[ 0.066782] ... fixed-purpose events: 0
[ 0.066782] ... event mask: 000000000000003f
[ 0.073423] Hierarchical SRCU implementation.
[ 0.086859] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.093418] smp: Bringing up secondary CPUs ...
[ 0.120113] x86: Booting SMP configuration:
[ 0.120116] .... node #0, CPUs: #1
[ 0.122241] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.122243] Measured 228779525 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.122245] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.146783] #2 #3
[ 0.173687] smp: Brought up 1 node, 4 CPUs
[ 0.173687] smpboot: Total of 4 processors activated (21568.90 BogoMIPS)
[ 0.174508] devtmpfs: initialized
[ 0.174508] x86/mm: Memory block size: 128MB
[ 0.174508] PM: Registering ACPI NVS region [mem 0x00087000-0x00087fff] (4096 bytes)
[ 0.174508] PM: Registering ACPI NVS region [mem 0xddc07000-0xddd26fff] (1179648 bytes)
[ 0.174508] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.174508] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.174508] pinctrl core: initialized pinctrl subsystem
[ 0.174508] RTC time: 18:14:42, date: 01/22/18
[ 0.176700] NET: Registered protocol family 16
[ 0.176889] cpuidle: using governor ladder
[ 0.176889] cpuidle: using governor menu
[ 0.176889] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176889] ACPI: bus type PCI registered
[ 0.176889] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176889] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.176889] PCI: not using MMCONFIG
[ 0.176889] PCI: Using configuration type 1 for base access
[ 0.176889] PCI: Using configuration type 1 for extended access
[ 0.177625] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.177625] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.177625] ACPI: Added _OSI(Module Device)
[ 0.177625] ACPI: Added _OSI(Processor Device)
[ 0.177625] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177625] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183505] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.185396] ACPI: EC: EC started
[ 0.185398] ACPI: EC: interrupt blocked
[ 0.186493] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[ 0.186495] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.186496] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[ 0.186497] ACPI: Interpreter enabled
[ 0.186519] ACPI: (supports S0 S3 S4 S5)
[ 0.186521] ACPI: Using IOAPIC for interrupt routing
[ 0.186650] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.186909] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.186921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.187151] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.188042] ACPI: Power Resource [P0U3] (off)
[ 0.188067] ACPI: Power Resource [P3U3] (off)
[ 0.188344] ACPI: Power Resource [P0U2] (off)
[ 0.188365] ACPI: Power Resource [P3U2] (off)
[ 0.188724] ACPI: Power Resource [P0ST] (on)
[ 0.188761] ACPI: Power Resource [P3ST] (on)
[ 0.192141] ACPI: Power Resource [P0SD] (off)
[ 0.192168] ACPI: Power Resource [P3SD] (off)
[ 0.193869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.193875] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.193966] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.194048] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.194050] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.194059] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.194453] PCI host bridge to bus 0000:00
[ 0.194455] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.194456] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff window]
[ 0.194457] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff window]
[ 0.194458] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff window]
[ 0.194459] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff window]
[ 0.194460] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff window]
[ 0.194461] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff window]
[ 0.194462] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff window]
[ 0.194462] pci_bus 0000:00: root bus resource [mem 0x000ce000-0x000cffff window]
[ 0.194463] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff window]
[ 0.194464] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff window]
[ 0.194465] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff window]
[ 0.194466] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff window]
[ 0.194467] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff window]
[ 0.194468] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff window]
[ 0.194469] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
[ 0.194470] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
[ 0.194471] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff window]
[ 0.194472] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff window]
[ 0.194476] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff window]
[ 0.194476] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff window]
[ 0.194477] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff window]
[ 0.194478] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff window]
[ 0.194479] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff window]
[ 0.194480] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff window]
[ 0.194481] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.194482] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff window]
[ 0.194483] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.194484] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.194485] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.194493] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.194577] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[ 0.194671] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
[ 0.194689] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.194697] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.194703] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.194709] pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
[ 0.194715] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.194719] pci 0000:00:01.0: enabling Extended Tags
[ 0.194725] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.194756] pci 0000:00:01.0: supports D1 D2
[ 0.194757] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.194823] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.194837] pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
[ 0.194857] pci 0000:00:01.1: enabling Extended Tags
[ 0.194887] pci 0000:00:01.1: supports D1 D2
[ 0.194938] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.195010] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[ 0.195046] pci 0000:00:02.3: enabling Extended Tags
[ 0.195086] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.195151] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
[ 0.195187] pci 0000:00:02.4: enabling Extended Tags
[ 0.195226] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.195329] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.195442] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.195458] pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
[ 0.195462] pci 0000:00:08.0: reg 0x18: [mem 0xf0b00000-0xf0bfffff]
[ 0.195467] pci 0000:00:08.0: reg 0x1c: [mem 0xf0d6f000-0xf0d6ffff]
[ 0.195474] pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
[ 0.195549] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.195626] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.195637] pci 0000:00:09.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff]
[ 0.195674] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.195753] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.195782] pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
[ 0.195886] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.195966] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.195989] pci 0000:00:11.0: reg 0x10: [io 0x2118-0x211f]
[ 0.195999] pci 0000:00:11.0: reg 0x14: [io 0x2124-0x2127]
[ 0.196008] pci 0000:00:11.0: reg 0x18: [io 0x2110-0x2117]
[ 0.196017] pci 0000:00:11.0: reg 0x1c: [io 0x2120-0x2123]
[ 0.196026] pci 0000:00:11.0: reg 0x20: [io 0x2100-0x210f]
[ 0.196036] pci 0000:00:11.0: reg 0x24: [mem 0xf0d6c000-0xf0d6c3ff]
[ 0.196086] pci 0000:00:11.0: PME# supported from D3hot
[ 0.196221] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.196243] pci 0000:00:12.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff]
[ 0.196324] pci 0000:00:12.0: supports D1 D2
[ 0.196325] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196390] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.196497] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.196633] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[ 0.196706] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[ 0.196771] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[ 0.196845] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[ 0.196914] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[ 0.196978] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[ 0.197151] pci 0000:01:00.0: [168c:0042] type 00 class 0x028000
[ 0.197193] pci 0000:01:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
[ 0.197348] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.206734] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.206747] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
[ 0.206872] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.206916] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.206944] pci 0000:02:00.0: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit]
[ 0.206964] pci 0000:02:00.0: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit]
[ 0.207091] pci 0000:02:00.0: supports D1 D2
[ 0.207092] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216739] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.216750] pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
[ 0.216753] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.217008] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217078] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217122] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217227] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217300] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217332] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.217372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.218458] ACPI: EC: interrupt unblocked
[ 0.218465] ACPI: EC: event unblocked
[ 0.218483] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.218484] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.218582] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.218582] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.218582] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.218582] vgaarb: loaded
[ 0.220203] EDAC MC: Ver: 3.0.0
[ 0.220289] Registered efivars operations
[ 0.233654] PCI: Using ACPI for IRQ routing
[ 0.235431] PCI: pci_cache_line_size set to 64 bytes
[ 0.235513] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
[ 0.235515] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.235516] e820: reserve RAM buffer [mem 0xd8a07000-0xdbffffff]
[ 0.235517] e820: reserve RAM buffer [mem 0xddda9000-0xdfffffff]
[ 0.235518] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.235518] e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff]
[ 0.235642] NetLabel: Initializing
[ 0.235643] NetLabel: domain hash size = 128
[ 0.235643] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.235660] NetLabel: unlabeled traffic allowed by default
[ 0.235684] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.235684] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.238724] clocksource: Switched to clocksource hpet
[ 0.248482] VFS: Disk quotas dquot_6.6.0
[ 0.248527] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.248630] pnp: PnP ACPI init
[ 0.248818] system 00:00: [io 0x0f50-0x0f51] has been reserved
[ 0.248820] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.248822] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.248824] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.248829] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249053] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249084] pnp 00:02: Plug and Play ACPI device, IDs PTL0001 PNP0303 (active)
[ 0.249149] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.249151] system 00:03: [io 0x0530-0x0537] has been reserved
[ 0.249152] system 00:03: [io 0x0800-0x0827] has been reserved
[ 0.249153] system 00:03: [io 0x0830] has been reserved
[ 0.249155] system 00:03: [io 0x0840-0x0847] has been reserved
[ 0.249156] system 00:03: [io 0x0b00-0x0b1f] has been reserved
[ 0.249157] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.249159] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.249160] system 00:03: [io 0x0c14] has been reserved
[ 0.249161] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.249162] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.249164] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.249165] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.249166] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.249168] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.249169] system 00:03: [io 0x0cf9] could not be reserved
[ 0.249171] system 00:03: [io 0x8100-0x81ff window] has been reserved
[ 0.249172] system 00:03: [io 0x8200-0x82ff window] has been reserved
[ 0.249176] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249287] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.249288] system 00:04: [mem 0xff800000-0xffffffff] has been reserved
[ 0.249289] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.249291] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.249292] system 00:04: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.249293] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.249296] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.249831] pnp: PnP ACPI: found 5 devices
[ 0.257154] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.257165] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.257197] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0d80000-0xf0d9ffff pref]
[ 0.257200] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.257204] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
[ 0.257211] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.257213] pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
[ 0.257216] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.257224] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[ 0.257225] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff window]
[ 0.257226] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff window]
[ 0.257227] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff window]
[ 0.257228] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff window]
[ 0.257229] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff window]
[ 0.257230] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff window]
[ 0.257231] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff window]
[ 0.257232] pci_bus 0000:00: resource 12 [mem 0x000ce000-0x000cffff window]
[ 0.257233] pci_bus 0000:00: resource 13 [mem 0x000d0000-0x000d1fff window]
[ 0.257234] pci_bus 0000:00: resource 14 [mem 0x000d2000-0x000d3fff window]
[ 0.257234] pci_bus 0000:00: resource 15 [mem 0x000d4000-0x000d5fff window]
[ 0.257235] pci_bus 0000:00: resource 16 [mem 0x000d6000-0x000d7fff window]
[ 0.257236] pci_bus 0000:00: resource 17 [mem 0x000d8000-0x000d9fff window]
[ 0.257237] pci_bus 0000:00: resource 18 [mem 0x000da000-0x000dbfff window]
[ 0.257238] pci_bus 0000:00: resource 19 [mem 0x000dc000-0x000ddfff window]
[ 0.257239] pci_bus 0000:00: resource 20 [mem 0x000de000-0x000dffff window]
[ 0.257240] pci_bus 0000:00: resource 21 [mem 0x000e0000-0x000e1fff window]
[ 0.257241] pci_bus 0000:00: resource 22 [mem 0x000e2000-0x000e3fff window]
[ 0.257242] pci_bus 0000:00: resource 23 [mem 0x000e4000-0x000e5fff window]
[ 0.257243] pci_bus 0000:00: resource 24 [mem 0x000e6000-0x000e7fff window]
[ 0.257244] pci_bus 0000:00: resource 25 [mem 0x000e8000-0x000e9fff window]
[ 0.257245] pci_bus 0000:00: resource 26 [mem 0x000ea000-0x000ebfff window]
[ 0.257246] pci_bus 0000:00: resource 27 [mem 0x000ec000-0x000edfff window]
[ 0.257247] pci_bus 0000:00: resource 28 [mem 0x000ee000-0x000effff window]
[ 0.257247] pci_bus 0000:00: resource 29 [mem 0xe0000000-0xf7ffffff window]
[ 0.257248] pci_bus 0000:00: resource 30 [mem 0xfc000000-0xfdffffff window]
[ 0.257249] pci_bus 0000:00: resource 31 [io 0x0000-0x0cf7 window]
[ 0.257250] pci_bus 0000:00: resource 32 [io 0x0d00-0xffff window]
[ 0.257252] pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf09fffff]
[ 0.257253] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.257254] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 0.257355] NET: Registered protocol family 2
[ 0.257580] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.257759] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.258032] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.258116] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.258158] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.258267] NET: Registered protocol family 1
[ 0.258299] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.258853] PCI: CLS 32 bytes, default 64
[ 0.258911] Unpacking initramfs...
[ 0.467086] Freeing initrd memory: 16596K
[ 0.530557] AMD-Vi: IOMMU performance counters supported
[ 0.530738] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.530740] pci 0000:00:00.2: PCI INT A: not connected
[ 0.530988] iommu: Adding device 0000:00:01.0 to group 0
[ 0.531049] iommu: Using direct mapping for device 0000:00:01.0
[ 0.531080] iommu: Adding device 0000:00:01.1 to group 0
[ 0.531124] iommu: Adding device 0000:00:02.0 to group 1
[ 0.531137] iommu: Adding device 0000:00:02.3 to group 1
[ 0.531149] iommu: Adding device 0000:00:02.4 to group 1
[ 0.531210] iommu: Adding device 0000:00:03.0 to group 2
[ 0.531272] iommu: Adding device 0000:00:08.0 to group 3
[ 0.531340] iommu: Adding device 0000:00:09.0 to group 4
[ 0.531353] iommu: Adding device 0000:00:09.2 to group 4
[ 0.531413] iommu: Adding device 0000:00:10.0 to group 5
[ 0.531479] iommu: Adding device 0000:00:11.0 to group 6
[ 0.531545] iommu: Adding device 0000:00:12.0 to group 7
[ 0.531620] iommu: Adding device 0000:00:14.0 to group 8
[ 0.531634] iommu: Adding device 0000:00:14.3 to group 8
[ 0.531714] iommu: Adding device 0000:00:18.0 to group 9
[ 0.531728] iommu: Adding device 0000:00:18.1 to group 9
[ 0.531740] iommu: Adding device 0000:00:18.2 to group 9
[ 0.531754] iommu: Adding device 0000:00:18.3 to group 9
[ 0.531767] iommu: Adding device 0000:00:18.4 to group 9
[ 0.531779] iommu: Adding device 0000:00:18.5 to group 9
[ 0.531799] iommu: Adding device 0000:01:00.0 to group 1
[ 0.531812] iommu: Adding device 0000:02:00.0 to group 1
[ 0.532378] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.532379] AMD-Vi: Extended features (0x37ef22294ada):
[ 0.532380] PPR NX GT IA GA PC GA_vAPIC
[ 0.532721] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.533973] amd_uncore: AMD NB counters detected
[ 0.534306] LVT offset 0 assigned for vector 0x400
[ 0.534374] perf: AMD IBS detected (0x000007ff)
[ 0.534380] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.534405] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d89ad586b, max_idle_ns: 440795245130 ns
[ 0.534462] Scanning for low memory corruption every 60 seconds
[ 0.535144] Initialise system trusted keyrings
[ 0.535169] Key type blacklist registered
[ 0.535443] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.536489] zbud: loaded
[ 0.539073] Key type asymmetric registered
[ 0.539151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.539219] io scheduler noop registered
[ 0.539220] io scheduler deadline registered
[ 0.539271] io scheduler cfq registered (default)
[ 0.539272] io scheduler mq-deadline registered
[ 0.539272] io scheduler kyber registered
[ 0.539300] io scheduler bfq registered
[ 0.539986] pcieport 0000:00:02.3: Signaling PME with IRQ 26
[ 0.540063] pcieport 0000:00:02.4: Signaling PME with IRQ 27
[ 0.540103] efifb: probing for efifb
[ 0.540140] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[ 0.540141] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.540141] efifb: scrolling: redraw
[ 0.540143] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.542357] Console: switching to colour frame buffer device 200x56
[ 0.544823] fb0: EFI VGA frame buffer device
[ 0.545411] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.546254] rtc_cmos 00:01: RTC can wake from S4
[ 0.546369] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.546396] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.546466] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.546512] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.546798] NET: Registered protocol family 10
[ 0.551957] Segment Routing with IPv6
[ 0.551994] NET: Registered protocol family 17
[ 0.552343] RAS: Correctable Errors collector initialized.
[ 0.552512] microcode: CPU0: patch_level=0x06006118
[ 0.552521] microcode: CPU1: patch_level=0x06006118
[ 0.552532] microcode: CPU2: patch_level=0x06006118
[ 0.552541] microcode: CPU3: patch_level=0x06006118
[ 0.552615] microcode: Microcode Update Driver: v2.2.
[ 0.552795] registered taskstats version 1
[ 0.552804] Loading compiled-in X.509 certificates
[ 0.552834] zswap: loaded using pool lzo/zbud
[ 0.557303] Key type big_key registered
[ 0.557824] Magic number: 2:699:241
[ 0.558113] rtc_cmos 00:01: setting system clock to 2018-01-22 18:14:42 UTC (1516644882)
[ 0.561264] Freeing unused kernel memory: 1348K
[ 0.561267] Write protecting the kernel read-only data: 16384k
[ 0.562367] Freeing unused kernel memory: 2016K
[ 0.565302] Freeing unused kernel memory: 1308K
[ 0.613287] Linux agpgart interface v0.103
[ 0.636696] [drm] amdgpu kernel modesetting enabled.
[ 0.638101] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 0.638103] fb: switching to amdgpudrmfb from EFI VGA
[ 0.638140] Console: switching to colour dummy device 80x25
[ 0.638648] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x17AA:0x39FF 0xC8).
[ 0.638660] [drm] register mmio base: 0xF0D00000
[ 0.638661] [drm] register mmio size: 262144
[ 0.638874] [drm] UVD is enabled in physical mode
[ 0.638877] [drm] VCE enabled in physical mode
[ 0.638909] ATOM BIOS: 113-C75100-031
[ 0.638922] [drm] GPU post is not needed
[ 0.639044] [drm] vm size is 64 GB, block size is 13-bit, fragment size is 4-bit
[ 0.639052] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 0.639054] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 0.639058] [drm] Detected VRAM RAM=512M, BAR=512M
[ 0.639059] [drm] RAM width 128bits UNKNOWN
[ 0.639155] [TTM] Zone kernel: Available graphics memory: 3803562 kiB
[ 0.639156] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.639157] [TTM] Initializing pool allocator
[ 0.639164] [TTM] Initializing DMA pool allocator
[ 0.639198] [drm] amdgpu: 512M of VRAM memory ready
[ 0.639199] [drm] amdgpu: 3072M of GTT memory ready.
[ 0.639209] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.639291] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[ 0.639318] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.639318] [drm] Driver supports precise vblank timestamp query.
[ 0.639358] amdgpu 0000:00:01.0: amdgpu: using MSI.
[ 0.639385] [drm] amdgpu: irq initialized.
[ 0.639401] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[ 0.643143] [drm] amdgpu atom DIG backlight initialized
[ 0.643147] [drm] AMDGPU Display Connectors
[ 0.643148] [drm] Connector 0:
[ 0.643149] [drm] eDP-1
[ 0.643150] [drm] HPD1
[ 0.643152] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[ 0.643152] [drm] Encoders:
[ 0.643153] [drm] LCD1: INTERNAL_UNIPHY
[ 0.643154] [drm] Connector 1:
[ 0.643155] [drm] HDMI-A-1
[ 0.643155] [drm] HPD2
[ 0.643156] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[ 0.643157] [drm] Encoders:
[ 0.643157] [drm] DFP1: INTERNAL_UNIPHY
[ 0.643158] [drm] Connector 2:
[ 0.643158] [drm] DP-1
[ 0.643159] [drm] HPD3
[ 0.643160] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[ 0.643160] [drm] Encoders:
[ 0.643161] [drm] DFP2: INTERNAL_UNIPHY1
[ 0.643746] amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000000400080, cpu addr 0xffffa6f101115080
[ 0.643814] amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000000400100, cpu addr 0xffffa6f101115100
[ 0.643865] amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000000400180, cpu addr 0xffffa6f101115180
[ 0.643925] amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000000400200, cpu addr 0xffffa6f101115200
[ 0.643975] amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000000400280, cpu addr 0xffffa6f101115280
[ 0.644021] amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000400300, cpu addr 0xffffa6f101115300
[ 0.644065] amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000000400380, cpu addr 0xffffa6f101115380
[ 0.644109] amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000000400400, cpu addr 0xffffa6f101115400
[ 0.644156] amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000000400480, cpu addr 0xffffa6f101115480
[ 0.644182] amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x0000000000400520, cpu addr 0xffffa6f101115520
[ 0.645039] amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000004005a0, cpu addr 0xffffa6f1011155a0
[ 0.645127] amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x0000000000400620, cpu addr 0xffffa6f101115620
[ 0.645316] [drm] Found UVD firmware Version: 1.87 Family ID: 11
[ 0.646504] amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x000000f4002946e0, cpu addr 0xffffa6f1024416e0
[ 0.646625] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 0.646767] amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x0000000000400720, cpu addr 0xffffa6f101115720
[ 0.646828] amdgpu 0000:00:01.0: fence driver on ring 14 use gpu addr 0x00000000004007a0, cpu addr 0xffffa6f1011157a0
[ 0.652681] [drm] ring test on 0 succeeded in 12 usecs
[ 0.653076] [drm] ring test on 9 succeeded in 10 usecs
[ 0.653095] [drm] ring test on 1 succeeded in 8 usecs
[ 0.653134] [drm] ring test on 2 succeeded in 19 usecs
[ 0.653162] [drm] ring test on 3 succeeded in 13 usecs
[ 0.653191] [drm] ring test on 4 succeeded in 15 usecs
[ 0.653219] [drm] ring test on 5 succeeded in 14 usecs
[ 0.653235] [drm] ring test on 6 succeeded in 8 usecs
[ 0.653248] [drm] ring test on 7 succeeded in 6 usecs
[ 0.653258] [drm] ring test on 8 succeeded in 5 usecs
[ 0.653306] [drm] ring test on 10 succeeded in 2 usecs
[ 0.653310] [drm] ring test on 11 succeeded in 2 usecs
[ 1.680217] [drm] ring test on 12 succeeded in 0 usecs
[ 1.680219] [drm] UVD initialized successfully.
[ 1.881583] [drm] ring test on 13 succeeded in 8 usecs
[ 1.881589] [drm] ring test on 14 succeeded in 1 usecs
[ 1.881589] [drm] VCE initialized successfully.
[ 1.882178] [drm] ib test on ring 0 succeeded
[ 1.882589] [drm] ib test on ring 1 succeeded
[ 1.882712] [drm] ib test on ring 2 succeeded
[ 1.882739] [drm] ib test on ring 3 succeeded
[ 1.883139] [drm] ib test on ring 4 succeeded
[ 1.883672] [drm] ib test on ring 5 succeeded
[ 1.883745] [drm] ib test on ring 6 succeeded
[ 1.883775] [drm] ib test on ring 7 succeeded
[ 1.883971] [drm] ib test on ring 8 succeeded
[ 1.884360] [drm] ib test on ring 9 succeeded
[ 1.884436] [drm] ib test on ring 10 succeeded
[ 1.884459] [drm] ib test on ring 11 succeeded
[ 1.885391] [drm] ib test on ring 12 succeeded
[ 1.885780] [drm] ib test on ring 13 succeeded
[ 1.891408] amdgpu: [powerplay] min_core_set_clock not set
[ 1.892707] amdgpu: [powerplay] min_core_set_clock not set
[ 1.892767] amdgpu: [powerplay] min_core_set_clock not set
[ 2.549463] [drm] fb mappable at 0x1FF615000
[ 2.549465] [drm] vram apper at 0x1FF000000
[ 2.549466] [drm] size 5787648
[ 2.549467] [drm] fb depth is 24
[ 2.549467] [drm] pitch is 6400
[ 2.549679] fbcon: amdgpudrmfb (fb0) is primary device
[ 4.364791] amdgpu: [powerplay] min_core_set_clock not set
[ 4.368133] amdgpu: [powerplay] min_core_set_clock not set
[ 4.995721] amdgpu: [powerplay] min_core_set_clock not set
[ 4.995787] amdgpu: [powerplay] min_core_set_clock not set
[ 4.995844] amdgpu: [powerplay] min_core_set_clock not set
[ 4.995895] amdgpu: [powerplay] min_core_set_clock not set
[ 4.995949] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996443] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996703] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996792] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996848] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996901] amdgpu: [powerplay] min_core_set_clock not set
[ 4.996955] Console: switching to colour frame buffer device 200x56
[ 5.000206] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 5.026970] amdgpu: [powerplay] min_core_set_clock not set
[ 5.027586] [drm] Initialized amdgpu 3.19.0 20150101 for 0000:00:01.0 on minor 0
[ 5.034887] amdgpu: [powerplay] min_core_set_clock not set
[ 5.034957] amdgpu: [powerplay] min_core_set_clock not set
[ 5.035014] amdgpu: [powerplay] min_core_set_clock not set
[ 5.035513] amdgpu: [powerplay] min_core_set_clock not set
[ 5.041016] [drm] radeon kernel modesetting enabled.
[ 5.095479] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 5.095482] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.101384] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.102800] SCSI subsystem initialized
[ 5.105198] ACPI: bus type USB registered
[ 5.105236] usbcore: registered new interface driver usbfs
[ 5.105250] usbcore: registered new interface driver hub
[ 5.105305] usbcore: registered new device driver usb
[ 5.106393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.107251] ehci-pci: EHCI PCI platform driver
[ 5.107573] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 5.107582] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 5.107598] ehci-pci 0000:00:12.0: debug port 2
[ 5.107658] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6d000
[ 5.109976] libata version 3.00 loaded.
[ 5.123432] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 5.123670] hub 1-0:1.0: USB hub found
[ 5.123677] hub 1-0:1.0: 2 ports detected
[ 5.124132] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.124152] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 5.124384] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 5.124781] hub 2-0:1.0: USB hub found
[ 5.124793] hub 2-0:1.0: 4 ports detected
[ 5.125058] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.125065] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 5.130338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.131274] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.131577] hub 3-0:1.0: USB hub found
[ 5.131590] hub 3-0:1.0: 4 ports detected
[ 5.131889] ahci 0000:00:11.0: version 3.0
[ 5.132233] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.132237] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 5.132867] scsi host0: ahci
[ 5.133141] scsi host1: ahci
[ 5.133193] ata1: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c100 irq 35
[ 5.133196] ata2: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c180 irq 35
[ 5.453548] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 5.453581] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 5.602441] hub 1-1:1.0: USB hub found
[ 5.602743] hub 1-1:1.0: 4 ports detected
[ 5.603495] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.606906] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.609732] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[ 5.614444] ata2.00: configured for UDMA/33
[ 5.626568] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.647802] usbcore: registered new interface driver usbhid
[ 5.647805] usbhid: USB HID core driver
[ 5.730825] ata1.00: ATA-10: ST1000LM035-1RK172, LCM2, max UDMA/100
[ 5.730828] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.780820] ata1.00: configured for UDMA/100
[ 5.781484] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 LCM2 PQ: 0 ANSI: 5
[ 5.785663] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
[ 5.804619] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.804623] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.804662] sd 0:0:0:0: [sda] Write Protect is off
[ 5.804667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.804779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.820779] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.820784] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.821137] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.868561] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 5.872047] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.900145] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 6.096881] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 6.961274] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 7.988827] random: crng init done
[ 8.293234] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.318482] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 8.334044] systemd[1]: Detected architecture x86-64.
[ 8.344959] systemd[1]: Set hostname to <funilrys>.
[ 9.586908] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.587456] systemd[1]: Created slice System Slice.
[ 9.587532] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 9.595853] systemd[1]: Listening on udev Kernel Socket.
[ 9.595929] systemd[1]: Listening on Journal Socket.
[ 9.599767] systemd[1]: Starting Load Kernel Modules...
[ 9.599811] systemd[1]: Reached target Login Prompts.
[ 9.801415] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 9.858903] systemd-journald[237]: Received request to flush runtime journal from PID 1
[ 10.785398] acpi_cpufreq: overriding BIOS provided _PSD data
[ 10.851458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 10.851474] ACPI: Power Button [PWRB]
[ 10.854060] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 10.854649] ACPI: Lid Switch [LID]
[ 10.854712] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 10.854894] ACPI: Power Button [PWRF]
[ 10.869269] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 10.869506] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 11.022455] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMB.SMB0) (20170728/utaddress-247)
[ 11.022466] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.035721] ACPI: Battery Slot [BAT0] (battery present)
[ 11.050991] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 11.051110] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x4a
[ 11.051135] sp5100_tco: failed to find MMIO address, giving up.
[ 11.079582] ACPI: AC Adapter [ADP0] (off-line)
[ 11.114524] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.205604] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.205626] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.214575] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffa6f1010ed000, 54:e1:ad:ad:37:36, XID 10900880 IRQ 37
[ 11.214581] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.229145] tpm_crb MSFT0101:00: can't request region for resource [mem 0xddd22000-0xddd25fff]
[ 11.229239] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 11.431475] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input5
[ 11.512398] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.014505] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 12.014759] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 12.015121] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
[ 12.084854] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 12.085305] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.183217] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:045E:07FD.0001/input/input7
[ 12.196143] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 12.196921] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.196926] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.196930] snd_hda_codec_generic hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.196932] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
[ 12.196934] snd_hda_codec_generic hdaudioC1D0: inputs:
[ 12.196938] snd_hda_codec_generic hdaudioC1D0: Mic=0x19
[ 12.196940] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12
[ 12.204889] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input9
[ 12.216185] media: Linux media interface: v0.10
[ 12.237603] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input10
[ 12.237728] hid-generic 0003:045E:07FD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:10.0-2/input0
[ 12.238484] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:045E:07FD.0002/input/input11
[ 12.260526] AVX2 version of gcm_enc/dec engaged.
[ 12.260529] AES CTR mode by8 optimization enabled
[ 12.284620] Linux video capture interface: v2.00
[ 12.297144] hid-generic 0003:045E:07FD.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:10.0-2/input1
[ 12.297446] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.2/0003:045E:07FD.0003/input/input12
[ 12.297520] hid-generic 0003:045E:07FD.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:10.0-2/input2
[ 12.404832] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 12.404864] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 12.405285] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 12.415448] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 12.415455] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 12.416371] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
[ 12.460249] Bluetooth: Core ver 2.22
[ 12.460281] NET: Registered protocol family 31
[ 12.460282] Bluetooth: HCI device and connection manager initialized
[ 12.460289] Bluetooth: HCI socket layer initialized
[ 12.460293] Bluetooth: L2CAP socket layer initialized
[ 12.460302] Bluetooth: SCO socket layer initialized
[ 12.462907] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 12.569370] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 12.651517] kvm: disabled by bios
[ 12.659746] MCE: In-kernel MCE decoding enabled.
[ 12.664700] usbcore: registered new interface driver btusb
[ 12.666082] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.666085] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.667191] uvcvideo: Found UVC 1.00 device EasyCamera (174f:241a)
[ 12.672770] uvcvideo 1-1.2:1.0: Entity type for entity Extension 3 was not initialized!
[ 12.672774] uvcvideo 1-1.2:1.0: Entity type for entity Processing 2 was not initialized!
[ 12.672775] uvcvideo 1-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.673456] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
[ 12.674536] usbcore: registered new interface driver uvcvideo
[ 12.674538] USB Video Class driver (1.1.1)
[ 12.710765] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.710768] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.840427] Adding 8388604k swap on /dev/sda6. Priority:-2 extents:1 across:8388604k FS
[ 12.984602] mousedev: PS/2 mouse device common for all mice
[ 13.052254] ath10k_pci 0000:01:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 13.058803] ath: EEPROM regdomain: 0x6c
[ 13.058805] ath: EEPROM indicates we should expect a direct regpair map
[ 13.058808] ath: Country alpha2 being used: 00
[ 13.058809] ath: Regpair used: 0x6c
[ 13.142223] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[ 29.535888] amdgpu: [powerplay] min_core_set_clock not set
[ 29.535995] amdgpu: [powerplay] min_core_set_clock not set
[ 29.536053] amdgpu: [powerplay] min_core_set_clock not set
[ 29.536107] amdgpu: [powerplay] min_core_set_clock not set
[ 31.171984] amdgpu: [powerplay] min_core_set_clock not set
[ 31.172051] amdgpu: [powerplay] min_core_set_clock not set
[ 31.172108] amdgpu: [powerplay] min_core_set_clock not set
[ 31.172162] amdgpu: [powerplay] min_core_set_clock not set
[ 31.331743] amdgpu: [powerplay] min_core_set_clock not set
[ 31.332057] amdgpu: [powerplay] min_core_set_clock not set
[ 31.332118] amdgpu: [powerplay] min_core_set_clock not set
[ 31.332174] amdgpu: [powerplay] min_core_set_clock not set
[ 31.755054] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 31.812392] r8169 0000:02:00.0 enp2s0: link down
[ 31.812477] r8169 0000:02:00.0 enp2s0: link down
[ 31.812503] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 31.820244] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 32.469438] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 33.124994] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 33.428301] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 33.990768] amdgpu: [powerplay] min_core_set_clock not set
[ 33.991446] amdgpu: [powerplay] min_core_set_clock not set
[ 33.991528] amdgpu: [powerplay] min_core_set_clock not set
[ 33.992072] amdgpu: [powerplay] min_core_set_clock not set
[ 34.028354] r8169 0000:02:00.0 enp2s0: link up
[ 34.028370] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 37.752565] fuse init (API version 7.26)Offline
#6 2018-01-22 18:05:19
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,045
Re: [SOLVED] Elantech touchpad is not working nor detected
At a guess what is the output of
$ ls /sys/bus/acpi/devices/Offline
#7 2018-01-22 18:42:19
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
@loqs
# ls /sys/bus/acpi/devices/
ACPI0003:00 LNXSYBUS:00 PNP0C02:02 PNP0C0F:00 device:05 device:16 device:27
AMD0010:00 LNXSYBUS:01 PNP0C02:03 PNP0C0F:01 device:06 device:17 device:28
AMD0030:00 LNXSYSTM:00 PNP0C02:04 PNP0C0F:02 device:07 device:18 device:29
ELAN060B:00 LNXVIDEO:00 PNP0C02:05 PNP0C0F:03 device:08 device:19 device:2a
LNXCPU:00 LNXVIDEO:01 PNP0C02:06 PNP0C0F:04 device:09 device:1a device:2b
LNXCPU:01 MSFT0101:00 PNP0C02:07 PNP0C0F:05 device:0a device:1b device:2c
LNXCPU:02 MSFT0101:01 PNP0C02:08 PNP0C0F:06 device:0b device:1c device:2d
LNXCPU:03 PNP0000:00 PNP0C02:09 PNP0C0F:07 device:0c device:1d device:2e
LNXPOWER:00 PNP0100:00 PNP0C02:0a PNP0C14:00 device:0d device:1e device:2f
LNXPOWER:01 PNP0103:00 PNP0C02:0b PTL0001:00 device:0e device:1f device:30
LNXPOWER:02 PNP0200:00 PNP0C02:0c PTL0003:00 device:0f device:20 device:31
LNXPOWER:03 PNP0800:00 PNP0C02:0d VPC2004:00 device:10 device:21 device:32
LNXPOWER:04 PNP0A08:00 PNP0C04:00 device:00 device:11 device:22 device:33
LNXPOWER:05 PNP0B00:00 PNP0C09:00 device:01 device:12 device:23
LNXPOWER:06 PNP0C01:00 PNP0C0A:00 device:02 device:13 device:24
LNXPOWER:07 PNP0C02:00 PNP0C0C:00 device:03 device:14 device:25
LNXPWRBN:00 PNP0C02:01 PNP0C0D:00 device:04 device:15 device:26Offline
#8 2018-01-22 19:23:25
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,045
Re: [SOLVED] Elantech touchpad is not working nor detected
ELAN060B:00 should be matched by the elan_i2c module does lsmod show that module as loaded? If it is not try modprobing it and see if that produces any new dmesg output or produces a new entry in xinput list.
Offline
#9 2018-01-22 20:01:40
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
@loqs here's the result of lsmod
# lsmod
Module Size Used by
fuse 118784 3
nls_iso8859_1 16384 1
nls_cp437 20480 1
vfat 20480 1
fat 77824 1 vfat
arc4 16384 2
joydev 24576 0
mousedev 24576 0
uvcvideo 102400 0
edac_mce_amd 28672 0
btusb 53248 0
videobuf2_vmalloc 16384 1 uvcvideo
btrtl 16384 1 btusb
btbcm 16384 1 btusb
videobuf2_memops 16384 1 videobuf2_vmalloc
kvm 696320 0
btintel 16384 1 btusb
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
bluetooth 626688 5 btrtl,btintel,btbcm,btusb
crc32_pclmul 16384 0
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_core 45056 2 uvcvideo,videobuf2_v4l2
ghash_clmulni_intel 16384 0
pcbc 16384 0
wmi_bmof 16384 0
videodev 204800 3 uvcvideo,videobuf2_core,videobuf2_v4l2
aesni_intel 188416 0
aes_x86_64 20480 1 aesni_intel
media 45056 2 uvcvideo,videodev
ecdh_generic 24576 1 bluetooth
snd_hda_codec_generic 86016 1
snd_hda_codec_hdmi 57344 1
hid_generic 16384 0
ath10k_pci 53248 0
ath10k_core 368640 1 ath10k_pci
ath 32768 1 ath10k_core
crypto_simd 16384 1 aesni_intel
snd_hda_intel 45056 4
snd_hda_codec 151552 3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic
mac80211 901120 1 ath10k_core
glue_helper 16384 1 aesni_intel
cfg80211 733184 3 mac80211,ath,ath10k_core
cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel
pcspkr 16384 0
evdev 20480 16
input_leds 16384 0
led_class 16384 1 input_leds
mac_hid 16384 0
ideapad_laptop 32768 0
snd_hda_core 90112 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic
sparse_keymap 16384 1 ideapad_laptop
fam15h_power 16384 0
k10temp 16384 0
snd_hwdep 16384 1 snd_hda_codec
rfkill 28672 6 bluetooth,ideapad_laptop,cfg80211
snd_pcm 114688 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
tpm_crb 16384 0
snd_timer 36864 1 snd_pcm
snd 90112 15 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_pcm
r8169 90112 0
mii 16384 1 r8169
shpchp 40960 0
wmi 28672 2 wmi_bmof,ideapad_laptop
tpm_tis 16384 0
i2c_hid 24576 0
ac 16384 0
sp5100_tco 16384 0
elan_i2c 40960 0
i2c_piix4 24576 0
tpm_tis_core 20480 1 tpm_tis
battery 20480 0
tpm 65536 3 tpm_tis,tpm_crb,tpm_tis_core
video 45056 1 ideapad_laptop
soundcore 16384 1 snd
button 16384 0
acpi_cpufreq 24576 0
sch_fq_codel 20480 6
crypto_user 16384 0
ip_tables 28672 0
x_tables 45056 1 ip_tables
ext4 720896 1
crc16 16384 2 bluetooth,ext4
mbcache 16384 1 ext4
jbd2 122880 1 ext4
fscrypto 32768 1 ext4
sr_mod 28672 0
cdrom 69632 1 sr_mod
sd_mod 61440 4
usbhid 57344 0
hid 126976 3 i2c_hid,hid_generic,usbhid
serio_raw 16384 0
atkbd 32768 0
libps2 16384 1 atkbd
ahci 40960 3
libahci 40960 1 ahci
crc32c_intel 24576 0
xhci_pci 16384 0
ehci_pci 16384 0
xhci_hcd 241664 1 xhci_pci
ehci_hcd 94208 1 ehci_pci
libata 274432 2 ahci,libahci
usbcore 282624 7 uvcvideo,usbhid,ehci_hcd,xhci_pci,btusb,xhci_hcd,ehci_pci
scsi_mod 204800 3 sd_mod,libata,sr_mod
usb_common 16384 1 usbcore
i8042 32768 1 ideapad_laptop
serio 28672 4 serio_raw,atkbd,i8042
radeon 1642496 0
amdgpu 2265088 17
i2c_algo_bit 16384 2 amdgpu,radeon
drm_kms_helper 192512 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
ttm 114688 2 amdgpu,radeon
drm 434176 8 amdgpu,radeon,ttm,drm_kms_helper
agpgart 49152 2 ttm,drm
[root@funilrys funilrys]# lsmod | grep elan
elan_i2c 40960 0
[root@funilrys funilrys]# lsmod
Module Size Used by
fuse 118784 3
nls_iso8859_1 16384 1
nls_cp437 20480 1
vfat 20480 1
fat 77824 1 vfat
arc4 16384 2
joydev 24576 0
mousedev 24576 0
uvcvideo 102400 0
edac_mce_amd 28672 0
btusb 53248 0
videobuf2_vmalloc 16384 1 uvcvideo
btrtl 16384 1 btusb
btbcm 16384 1 btusb
videobuf2_memops 16384 1 videobuf2_vmalloc
kvm 696320 0
btintel 16384 1 btusb
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
bluetooth 626688 5 btrtl,btintel,btbcm,btusb
crc32_pclmul 16384 0
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_core 45056 2 uvcvideo,videobuf2_v4l2
ghash_clmulni_intel 16384 0
pcbc 16384 0
wmi_bmof 16384 0
videodev 204800 3 uvcvideo,videobuf2_core,videobuf2_v4l2
aesni_intel 188416 0
aes_x86_64 20480 1 aesni_intel
media 45056 2 uvcvideo,videodev
ecdh_generic 24576 1 bluetooth
snd_hda_codec_generic 86016 1
snd_hda_codec_hdmi 57344 1
hid_generic 16384 0
ath10k_pci 53248 0
ath10k_core 368640 1 ath10k_pci
ath 32768 1 ath10k_core
crypto_simd 16384 1 aesni_intel
snd_hda_intel 45056 4
snd_hda_codec 151552 3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic
mac80211 901120 1 ath10k_core
glue_helper 16384 1 aesni_intel
cfg80211 733184 3 mac80211,ath,ath10k_core
cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel
pcspkr 16384 0
evdev 20480 16
input_leds 16384 0
led_class 16384 1 input_leds
mac_hid 16384 0
ideapad_laptop 32768 0
snd_hda_core 90112 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic
sparse_keymap 16384 1 ideapad_laptop
fam15h_power 16384 0
k10temp 16384 0
snd_hwdep 16384 1 snd_hda_codec
rfkill 28672 6 bluetooth,ideapad_laptop,cfg80211
snd_pcm 114688 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
tpm_crb 16384 0
snd_timer 36864 1 snd_pcm
snd 90112 15 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_pcm
r8169 90112 0
mii 16384 1 r8169
shpchp 40960 0
wmi 28672 2 wmi_bmof,ideapad_laptop
tpm_tis 16384 0
i2c_hid 24576 0
ac 16384 0
sp5100_tco 16384 0
elan_i2c 40960 0
i2c_piix4 24576 0
tpm_tis_core 20480 1 tpm_tis
battery 20480 0
tpm 65536 3 tpm_tis,tpm_crb,tpm_tis_core
video 45056 1 ideapad_laptop
soundcore 16384 1 snd
button 16384 0
acpi_cpufreq 24576 0
sch_fq_codel 20480 6
crypto_user 16384 0
ip_tables 28672 0
x_tables 45056 1 ip_tables
ext4 720896 1
crc16 16384 2 bluetooth,ext4
mbcache 16384 1 ext4
jbd2 122880 1 ext4
fscrypto 32768 1 ext4
sr_mod 28672 0
cdrom 69632 1 sr_mod
sd_mod 61440 4
usbhid 57344 0
hid 126976 3 i2c_hid,hid_generic,usbhid
serio_raw 16384 0
atkbd 32768 0
libps2 16384 1 atkbd
ahci 40960 3
libahci 40960 1 ahci
crc32c_intel 24576 0
xhci_pci 16384 0
ehci_pci 16384 0
xhci_hcd 241664 1 xhci_pci
ehci_hcd 94208 1 ehci_pci
libata 274432 2 ahci,libahci
usbcore 282624 7 uvcvideo,usbhid,ehci_hcd,xhci_pci,btusb,xhci_hcd,ehci_pci
scsi_mod 204800 3 sd_mod,libata,sr_mod
usb_common 16384 1 usbcore
i8042 32768 1 ideapad_laptop
serio 28672 4 serio_raw,atkbd,i8042
radeon 1642496 0
amdgpu 2265088 17
i2c_algo_bit 16384 2 amdgpu,radeon
drm_kms_helper 192512 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
ttm 114688 2 amdgpu,radeon
drm 434176 8 amdgpu,radeon,ttm,drm_kms_helper
agpgart 49152 2 ttm,drmThe following confirms that it was loaded ...
# lsmod | grep elan
elan_i2c 40960 0Offline
#10 2018-01-22 21:23:07
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,708
Re: [SOLVED] Elantech touchpad is not working nor detected
Try
psmouse.synaptics_intertouch=0Online
#11 2018-01-23 08:28:36
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
thanks for your answer @seth
I added
psmouse.synaptics_intertouch=0to my kernel parameters and I also
# modprobe psmousebecause it was not listed into
# lsmod | grep psm but that did not change anything 
Last edited by funilrys (2018-01-23 13:34:07)
Offline
#12 2018-01-23 09:01:43
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,708
Re: [SOLVED] Elantech touchpad is not working nor detected
Yeah, sorry - I just read your first comment ;-)
Up to speed neither psmouse is used nor seems the relevant elantech module auto-loaded.
The device should have a Fn key to toggle the touchpad - try whether that causes any difference, monitor the action with "dmesg -w"
If that doesn't change anything, try to lie to the BIOS and pass eg.
acpi_osi=! acpi_osi="Windows 2009"to the kernel parameters, also try "Windows 2012"
Online
#13 2018-01-23 09:22:42
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
So I tried
acpi_osi=!I was stuck in the ramdisk loading for more than 5 minutes and wasn't able to get into the system.
When I tried
acpi_osi="Windows 2009"I wasn't able to use the touchpad nether using
acpi_osi="Windows 2012"In all cases the toggle touchpad button was not monitored by
dmesg -wOffline
#14 2018-01-23 09:34:03
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,708
Re: [SOLVED] Elantech touchpad is not working nor detected
This is _one_ line, the exclamation mark clears the OSI so that the following windows part is the only value set.
Online
#15 2018-01-23 09:53:42
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Sorry, I misunderstood ...
So I tried
BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bd44ba84-e92b-4226-b81d-67e63a2cf114 rw quiet acpi_osi=! "acpi_osi=Windows 2009"and
BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bd44ba84-e92b-4226-b81d-67e63a2cf114 rw quiet acpi_osi=! "acpi_osi=Windows 2012"But still nothing monitored into
dmesg -wwhen pushing the toggle touchpad button.
Here's my lsmod which don't seem to be changed ...
# lsmod
Module Size Used by
fuse 118784 3
nls_iso8859_1 16384 1
nls_cp437 20480 1
vfat 20480 1
fat 77824 1 vfat
arc4 16384 2
mousedev 24576 0
joydev 24576 0
uvcvideo 102400 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
edac_mce_amd 28672 0
btusb 53248 0
btrtl 16384 1 btusb
videobuf2_v4l2 28672 1 uvcvideo
btbcm 16384 1 btusb
kvm 696320 0
videobuf2_core 45056 2 uvcvideo,videobuf2_v4l2
videodev 204800 3 uvcvideo,videobuf2_core,videobuf2_v4l2
irqbypass 16384 1 kvm
btintel 16384 1 btusb
crct10dif_pclmul 16384 0
bluetooth 626688 5 btrtl,btintel,btbcm,btusb
ath10k_pci 53248 0
crc32_pclmul 16384 0
wmi_bmof 16384 0
ghash_clmulni_intel 16384 0
ath10k_core 368640 1 ath10k_pci
pcbc 16384 0
media 45056 2 uvcvideo,videodev
ath 32768 1 ath10k_core
aesni_intel 188416 0
hid_generic 16384 0
ecdh_generic 24576 1 bluetooth
mac80211 901120 1 ath10k_core
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
cfg80211 733184 3 mac80211,ath,ath10k_core
ideapad_laptop 32768 0
r8169 90112 0
pcspkr 16384 0
glue_helper 16384 1 aesni_intel
sp5100_tco 16384 0
i2c_hid 24576 0
sparse_keymap 16384 1 ideapad_laptop
evdev 20480 16
input_leds 16384 0
rfkill 28672 6 bluetooth,ideapad_laptop,cfg80211
led_class 16384 1 input_leds
mac_hid 16384 0
mii 16384 1 r8169
cryptd 28672 3 crypto_simd,ghash_clmulni_intel,aesni_intel
i2c_piix4 24576 0
snd_hda_codec_generic 86016 1
elan_i2c 40960 0
snd_hda_codec_hdmi 57344 1
snd_hda_intel 45056 4
shpchp 40960 0
fam15h_power 16384 0
k10temp 16384 0
snd_hda_codec 151552 3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic
wmi 28672 2 wmi_bmof,ideapad_laptop
tpm_crb 16384 0
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
tpm 65536 3 tpm_tis,tpm_crb,tpm_tis_core
snd_hda_core 90112 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic
battery 20480 0
snd_hwdep 16384 1 snd_hda_codec
video 45056 1 ideapad_laptop
snd_pcm 114688 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_timer 36864 1 snd_pcm
snd 90112 15 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_pcm
ac 16384 0
soundcore 16384 1 snd
button 16384 0
acpi_cpufreq 24576 0
sch_fq_codel 20480 6
crypto_user 16384 0
ip_tables 28672 0
x_tables 45056 1 ip_tables
ext4 720896 1
crc16 16384 2 bluetooth,ext4
mbcache 16384 1 ext4
jbd2 122880 1 ext4
fscrypto 32768 1 ext4
sr_mod 28672 0
sd_mod 61440 4
cdrom 69632 1 sr_mod
usbhid 57344 0
hid 126976 3 i2c_hid,hid_generic,usbhid
serio_raw 16384 0
atkbd 32768 0
libps2 16384 1 atkbd
crc32c_intel 24576 0
ahci 40960 3
xhci_pci 16384 0
libahci 40960 1 ahci
ehci_pci 16384 0
xhci_hcd 241664 1 xhci_pci
ehci_hcd 94208 1 ehci_pci
libata 274432 2 ahci,libahci
usbcore 282624 7 uvcvideo,usbhid,ehci_hcd,xhci_pci,btusb,xhci_hcd,ehci_pci
scsi_mod 204800 3 sd_mod,libata,sr_mod
usb_common 16384 1 usbcore
i8042 32768 1 ideapad_laptop
serio 28672 4 serio_raw,atkbd,i8042
radeon 1642496 0
amdgpu 2265088 17
i2c_algo_bit 16384 2 amdgpu,radeon
drm_kms_helper 192512 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
ttm 114688 2 amdgpu,radeon
drm 434176 8 amdgpu,radeon,ttm,drm_kms_helper
agpgart 49152 2 ttm,drmOffline
#16 2018-01-23 13:23:38
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
I don't know if it's relevant but I just found this ...
# journalctl | grep i2c
Jan 21 12:03:58 funilrys kernel: i2c i2c-ELAN060B:00: hash matches
Jan 23 15:14:06 funilrys kernel: i2c /dev entries driverOffline
#17 2018-01-23 17:15:56
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,200
Re: [SOLVED] Elantech touchpad is not working nor detected
Just for fun, what are the output of cat /sys/class/input/event*/device/name
?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#18 2018-01-23 18:35:32
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Thanks for your answer @ewaller
# cat /sys/class/input/event*/device/name
AT Translated Set 2 keyboard
Microsoft Microsoft Nano Transceiver 1.1
HD-Audio Generic Mic
HD-Audio Generic Headphone
PC Speaker
Ideapad extra buttons
Microsoft Microsoft Nano Transceiver 1.1
Microsoft Microsoft Nano Transceiver 1.1
Power Button
Video Bus
Lid Switch
Power Button
EasyCamera: EasyCamera
HDA ATI HDMI HDMI/DP,pcm=3Offline
#19 2018-01-24 09:30:50
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Hello guys, just a short update.
I recently did a
# systemctl suspendand after wake up the logo of the toggle touchpad appears on screen (I use Cinnamon for now) but I still can't use the touchpad ... And that happens after every system suspend ...
That is really strange because when I press the toggle touchpad button the logo does not appear and no action is monitored anywhere ...
Edit
Here's the dmsg from the suspend command to complete wake up ...
[ 822.839226] PM: suspend entry (deep)
[ 822.839229] PM: Syncing filesystems ... done.
[ 823.214750] Freezing user space processes ... (elapsed 0.296 seconds) done.
[ 823.511606] OOM killer disabled.
[ 823.511607] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 823.513384] Suspending console(s) (use no_console_suspend to debug)
[ 823.514162] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 823.517728] sd 0:0:0:0: [sda] Stopping disk
[ 823.546864] amdgpu: [powerplay] min_core_set_clock not set
[ 823.577521] amdgpu: [powerplay] min_core_set_clock not set
[ 824.593615] ACPI: Preparing to enter system sleep state S3
[ 824.596570] ACPI: EC: event blocked
[ 824.596571] ACPI: EC: EC stopped
[ 824.596572] PM: Saving platform NVS memory
[ 824.596627] Disabling non-boot CPUs ...
[ 824.625628] smpboot: CPU 1 is now offline
[ 824.651554] smpboot: CPU 2 is now offline
[ 824.681433] smpboot: CPU 3 is now offline
[ 824.681470] ACPI: Low-level resume complete
[ 824.681470] ACPI: EC: EC started
[ 824.681470] PM: Restoring platform NVS memory
[ 824.681470] LVT offset 0 assigned for vector 0x400
[ 824.681470] Enabling non-boot CPUs ...
[ 824.681470] x86: Booting SMP configuration:
[ 824.681470] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 824.682173] cache: parent cpu1 should not be sleeping
[ 824.682269] microcode: CPU1: patch_level=0x06006118
[ 824.682382] CPU1 is up
[ 824.682412] smpboot: Booting Node 0 Processor 2 APIC 0x12
[ 824.682879] cache: parent cpu2 should not be sleeping
[ 824.682980] microcode: CPU2: patch_level=0x06006118
[ 824.683132] CPU2 is up
[ 824.683152] smpboot: Booting Node 0 Processor 3 APIC 0x13
[ 824.683527] cache: parent cpu3 should not be sleeping
[ 824.683622] microcode: CPU3: patch_level=0x06006118
[ 824.683848] CPU3 is up
[ 824.684425] ACPI: Waking up from system sleep state S3
[ 824.758262] ACPI: EC: event unblocked
[ 824.758961] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[ 824.761926] amdgpu: [powerplay] min_core_set_clock not set
[ 824.764478] sd 0:0:0:0: [sda] Starting disk
[ 824.768504] [drm] ring test on 0 succeeded in 5 usecs
[ 824.768692] [drm] ring test on 9 succeeded in 2 usecs
[ 824.768856] [drm] ring test on 1 succeeded in 69 usecs
[ 824.768881] [drm] ring test on 2 succeeded in 13 usecs
[ 824.768908] [drm] ring test on 3 succeeded in 14 usecs
[ 824.768919] [drm] ring test on 4 succeeded in 5 usecs
[ 824.768930] [drm] ring test on 5 succeeded in 5 usecs
[ 824.768943] [drm] ring test on 6 succeeded in 6 usecs
[ 824.768954] [drm] ring test on 7 succeeded in 5 usecs
[ 824.768965] [drm] ring test on 8 succeeded in 5 usecs
[ 824.769006] [drm] ring test on 10 succeeded in 2 usecs
[ 824.769009] [drm] ring test on 11 succeeded in 2 usecs
[ 824.775830] r8169 0000:02:00.0 enp2s0: link down
[ 824.996808] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 825.200159] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[ 825.230028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 825.237567] ata2.00: configured for UDMA/33
[ 825.796953] [drm] ring test on 12 succeeded in 1 usecs
[ 825.796955] [drm] UVD initialized successfully.
[ 825.998087] [drm] ring test on 13 succeeded in 0 usecs
[ 825.998110] [drm] ring test on 14 succeeded in 10 usecs
[ 825.998111] [drm] VCE initialized successfully.
[ 825.998387] [drm] ib test on ring 0 succeeded
[ 825.998641] [drm] ib test on ring 1 succeeded
[ 825.998672] [drm] ib test on ring 2 succeeded
[ 825.998691] [drm] ib test on ring 3 succeeded
[ 825.998714] [drm] ib test on ring 4 succeeded
[ 825.998732] [drm] ib test on ring 5 succeeded
[ 825.998756] [drm] ib test on ring 6 succeeded
[ 825.998777] [drm] ib test on ring 7 succeeded
[ 825.998799] [drm] ib test on ring 8 succeeded
[ 825.998823] [drm] ib test on ring 9 succeeded
[ 825.998841] [drm] ib test on ring 10 succeeded
[ 825.998859] [drm] ib test on ring 11 succeeded
[ 825.999629] [drm] ib test on ring 12 succeeded
[ 825.999907] [drm] ib test on ring 13 succeeded
[ 825.999982] amdgpu: [powerplay] min_core_set_clock not set
[ 826.000909] amdgpu: [powerplay] min_core_set_clock not set
[ 826.005700] amdgpu: [powerplay] min_core_set_clock not set
[ 826.671548] amdgpu: [powerplay] min_core_set_clock not set
[ 826.671643] amdgpu: [powerplay] min_core_set_clock not set
[ 826.681416] amdgpu: [powerplay] min_core_set_clock not set
[ 826.714764] amdgpu: [powerplay] min_core_set_clock not set
[ 826.714826] amdgpu: [powerplay] min_core_set_clock not set
[ 826.714930] amdgpu: [powerplay] min_core_set_clock not set
[ 827.048000] r8169 0000:02:00.0 enp2s0: link up
[ 827.096824] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 827.275375] amdgpu: [powerplay] min_core_set_clock not set
[ 827.279063] usb 1-1.1:1.0: rebind failed: -517
[ 827.279067] usb 1-1.1:1.1: rebind failed: -517
[ 827.289752] ata1.00: configured for UDMA/100
[ 827.290404] OOM killer enabled.
[ 827.290405] Restarting tasks ...
[ 827.290538] pci_bus 0000:01: Allocating resources
[ 827.290609] pci_bus 0000:02: Allocating resources
[ 827.300401] done.
[ 827.300413] video LNXVIDEO:01: Restoring backlight state
[ 827.428166] PM: suspend exit
[ 827.650695] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 827.665575] r8169 0000:02:00.0 enp2s0: link down
[ 827.665601] r8169 0000:02:00.0 enp2s0: link down
[ 827.665769] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 827.667313] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 828.299124] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 828.375920] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 829.907657] r8169 0000:02:00.0 enp2s0: link up
[ 829.907674] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes readyLast edited by funilrys (2018-01-24 09:36:55)
Offline
#20 2018-01-24 15:00:41
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,708
Re: [SOLVED] Elantech touchpad is not working nor detected
Do you use any power saving mechanisms like TLP, laptop-mode-tools or powertop autotuning?
(And since I do not know whether cinnamon has such built-in: what about eg. openbox?)
Online
#21 2018-01-24 16:17:01
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Well no I don't use such tools.
I tested
- gnome: Same thing, the toggle touchpad button appears
- plasma: Same thing
- Lxde: Same thing
- Openbox: nothing
In all case, the touchpad is not working ...
Offline
#22 2018-01-24 17:05:06
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,201
Re: [SOLVED] Elantech touchpad is not working nor detected
Check your BIOS/UEFI if you have an option to disable "advanced" touchpad features
Offline
#23 2018-01-24 17:34:20
- Gunnersky2002
- Member
- Registered: 2017-12-26
- Posts: 4
Re: [SOLVED] Elantech touchpad is not working nor detected
I have a Lenovo Ideapad 320-15ABR with an Elantech touchpad. I tried enable the Elantech and I2C options in my kernel to no avail. I then tried setting CONFIG_PINCTRL_AMD=y in my configuration and the touchpad worked in my new kernel.
Offline
#24 2018-01-24 18:37:26
- funilrys
- Member
- Registered: 2016-04-06
- Posts: 17
Re: [SOLVED] Elantech touchpad is not working nor detected
Thanks for your answers @V1del && @Gunnersky2002
@V1del I triple checked and no there is no option for the touchpad or related.
@Gunnersky2002 Sorry but I'm lost where do you set the configuration? Are we talking about kernel parameters?
Offline
#25 2018-01-24 18:52:30
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,045
Re: [SOLVED] Elantech touchpad is not working nor detected
https://cateee.net/lkddb/web-lkddb/PINCTRL_AMD.html
You would need to build a kernel with it that option set to Y to test.
Edit:
Kernels/Arch_Build_System config.64 is now just config the broken link on "running compilation jobs simultaneously" should link here ( will reduce build times on multicore systems ).
Last edited by loqs (2018-01-24 19:11:19)
Offline