You are not logged in.

Pages: 1

Topic closed

#1 2018-01-25 16:33:05

lost_not_found
Member
Registered: 2018-01-25
Posts: 5

Can't start i3 window manager [SOLVED]

I started reinstalling my arch-linux some hours ago this by following the Installation guide and everything was going  smooth until I tried to get i3 windows manager up and running.

I copied the file /etc/X11/xinit/xinitrc to ~/.xinitrc and I then added the line 

exec i3

. I run startx but it would always launch a black screen and the only way out that I see is the off button. It's the same if I do 

startx /usr/bin/i3

and I also tried having 

exec chromium

in ~/.xinitrc but even that goes to black screen.
I have an nvidia graphics card with drivers from nvidia package. I then also installed xf86-video-vesa but it didn't solve the problem either.

I had this working properly before and I don't think I'm doing things any differently. What could be the problem?

Last edited by lost_not_found (2018-01-26 15:57:13)

Offline

#2 2018-01-25 16:36:53

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,365
Website

Re: Can't start i3 window manager [SOLVED]

lost_not_found wrote:

I copied the file /etc/X11/xinit/xinitrc to ~/.xinitrc and I then added the line...

I would not expect that to work, you cannot just add a line, you must edit the file as described in the wiki.

lost_not_found wrote:

It's the same if I do `startx /usr/bin/i3`

That, however, should be expected to work.  Please provide the xorg log from this attempt.

Do you have nvidia only, or a hybrid graphics system?  What card, specifically, do you have? (what's the output of the lspci command from the xorg wiki page)?

Last edited by Trilby (2018-01-25 16:38:02)

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2018-01-25 16:43:17

seth
Member
Registered: 2012-09-03
Posts: 64,272

Re: Can't start i3 window manager [SOLVED]

and the only way out that I see is the off button

Switching VTs fails?
In case please add the dmesg output to the above list.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#4 2018-01-25 17:02:59

lost_not_found
Member
Registered: 2018-01-25
Posts: 5

Re: Can't start i3 window manager [SOLVED]

Trilby wrote:

Do you have nvidia only, or a hybrid graphics system?  What card, specifically, do you have? (what's the output of the lspci command from the xorg wiki page)?

01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
	Subsystem: Toshiba America Info Systems GK208M [GeForce GT 740M]
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
Trilby wrote:

Do you have nvidia only, or a hybrid graphics system?  What card, specifically, do you have? (what's the output of the lspci command from the xorg wiki page)?

This is what I got from the file Xorg.0.log

[   124.715] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   124.715] X Protocol Version 11, Revision 0
[   124.715] Build Operating System: Linux 4.9.71-1-lts x86_64 
[   124.715] Current Operating System: Linux vbox 4.14.15-1-ARCH #1 SMP PREEMPT Tue Jan 23 21:49:25 UTC 2018 x86_64
[   124.715] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=797f06e4-bede-46ec-97ae-e0d101dd9e25 rw quiet
[   124.715] Build Date: 25 December 2017  02:02:38PM
[   124.715]  
[   124.715] Current version of pixman: 0.34.0
[   124.715] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   124.715] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   124.715] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 25 16:41:34 2018
[   124.719] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   124.719] (==) No Layout section.  Using the first Screen section.
[   124.719] (==) No screen section available. Using defaults.
[   124.719] (**) |-->Screen "Default Screen Section" (0)
[   124.719] (**) |   |-->Monitor "<default monitor>"
[   124.720] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   124.720] (==) Automatically adding devices
[   124.720] (==) Automatically enabling devices
[   124.720] (==) Automatically adding GPU devices
[   124.720] (==) Automatically binding GPU devices
[   124.720] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   124.722] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   124.722] 	Entry deleted from font path.
[   124.722] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   124.722] 	Entry deleted from font path.
[   124.722] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   124.722] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   124.722] 	Entry deleted from font path.
[   124.722] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   124.722] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   124.722] (==) ModulePath set to "/usr/lib/xorg/modules"
[   124.722] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   124.723] (II) Loader magic: 0x558357e1cd60
[   124.723] (II) Module ABI versions:
[   124.723] 	X.Org ANSI C Emulation: 0.4
[   124.723] 	X.Org Video Driver: 23.0
[   124.723] 	X.Org XInput driver : 24.1
[   124.723] 	X.Org Server Extension : 10.0
[   124.723] (++) using VT number 1

[   124.723] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   124.724] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   124.725] (II) xfree86: Adding drm device (/dev/dri/card1)
[   124.725] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[   124.725] (II) xfree86: Adding drm device (/dev/dri/card0)
[   124.726] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[   124.727] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   124.727] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[   124.727] (--) PCI: (0:0:2:0) 8086:0416:1179:fa47 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   124.727] (--) PCI:*(0:1:0:0) 10de:1292:1179:fa47 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   124.727] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   124.728] (II) LoadModule: "glx"
[   124.729] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[   124.775] (II) Module glx: vendor="NVIDIA Corporation"
[   124.775] 	compiled for 4.0.2, module version = 1.0.0
[   124.775] 	Module class: X.Org Server Extension
[   124.776] (II) NVIDIA GLX Module  387.34  Tue Nov 21 02:04:31 PST 2017
[   124.776] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[   124.776] 	loading driver: nvidia
[   124.776] (II) Applying OutputClass "intel" to /dev/dri/card0
[   124.776] 	loading driver: modesetting
[   124.776] (==) Matched nvidia as autoconfigured driver 0
[   124.776] (==) Matched nouveau as autoconfigured driver 1
[   124.776] (==) Matched nv as autoconfigured driver 2
[   124.776] (==) Matched modesetting as autoconfigured driver 3
[   124.776] (==) Matched intel as autoconfigured driver 4
[   124.776] (==) Matched nouveau as autoconfigured driver 5
[   124.776] (==) Matched nv as autoconfigured driver 6
[   124.776] (==) Matched modesetting as autoconfigured driver 7
[   124.776] (==) Matched fbdev as autoconfigured driver 8
[   124.776] (==) Matched vesa as autoconfigured driver 9
[   124.776] (==) Assigned the driver to the xf86ConfigLayout
[   124.776] (II) LoadModule: "nvidia"
[   124.777] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   124.784] (II) Module nvidia: vendor="NVIDIA Corporation"
[   124.784] 	compiled for 4.0.2, module version = 1.0.0
[   124.784] 	Module class: X.Org Video Driver
[   124.784] (II) LoadModule: "nouveau"
[   124.785] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   124.787] (II) Module nouveau: vendor="X.Org Foundation"
[   124.787] 	compiled for 1.19.3, module version = 1.0.15
[   124.787] 	Module class: X.Org Video Driver
[   124.787] 	ABI class: X.Org Video Driver, version 23.0
[   124.787] (II) LoadModule: "nv"
[   124.787] (WW) Warning, couldn't open module nv
[   124.787] (II) UnloadModule: "nv"
[   124.787] (II) Unloading nv
[   124.787] (EE) Failed to load module "nv" (module does not exist, 0)
[   124.787] (II) LoadModule: "modesetting"
[   124.787] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   124.788] (II) Module modesetting: vendor="X.Org Foundation"
[   124.788] 	compiled for 1.19.6, module version = 1.19.6
[   124.788] 	Module class: X.Org Video Driver
[   124.788] 	ABI class: X.Org Video Driver, version 23.0
[   124.788] (II) LoadModule: "intel"
[   124.788] (WW) Warning, couldn't open module intel
[   124.788] (II) UnloadModule: "intel"
[   124.788] (II) Unloading intel
[   124.788] (EE) Failed to load module "intel" (module does not exist, 0)
[   124.788] (II) LoadModule: "fbdev"
[   124.788] (WW) Warning, couldn't open module fbdev
[   124.788] (II) UnloadModule: "fbdev"
[   124.788] (II) Unloading fbdev
[   124.788] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   124.788] (II) LoadModule: "vesa"
[   124.788] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   124.789] (II) Module vesa: vendor="X.Org Foundation"
[   124.789] 	compiled for 1.19.3, module version = 2.3.4
[   124.789] 	Module class: X.Org Video Driver
[   124.789] 	ABI class: X.Org Video Driver, version 23.0
[   124.789] (II) NVIDIA dlloader X Driver  387.34  Tue Nov 21 01:38:22 PST 2017
[   124.789] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   124.789] (II) NOUVEAU driver 
[   124.789] (II) NOUVEAU driver for NVIDIA chipset families :
[   124.789] 	RIVA TNT        (NV04)
[   124.789] 	RIVA TNT2       (NV05)
[   124.789] 	GeForce 256     (NV10)
[   124.790] 	GeForce 2       (NV11, NV15)
[   124.790] 	GeForce 4MX     (NV17, NV18)
[   124.790] 	GeForce 3       (NV20)
[   124.790] 	GeForce 4Ti     (NV25, NV28)
[   124.790] 	GeForce FX      (NV3x)
[   124.790] 	GeForce 6       (NV4x)
[   124.790] 	GeForce 7       (G7x)
[   124.790] 	GeForce 8       (G8x)
[   124.790] 	GeForce GTX 200 (NVA0)
[   124.790] 	GeForce GTX 400 (NVC0)
[   124.790] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   124.790] (II) VESA: driver for VESA chipsets: vesa
[   124.790] (II) systemd-logind: releasing fd for 226:1
[   124.791] (II) Loading sub module "fb"
[   124.791] (II) LoadModule: "fb"
[   124.791] (II) Loading /usr/lib/xorg/modules/libfb.so
[   124.792] (II) Module fb: vendor="X.Org Foundation"
[   124.792] 	compiled for 1.19.6, module version = 1.0.0
[   124.792] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   124.792] (II) Loading sub module "wfb"
[   124.792] (II) LoadModule: "wfb"
[   124.792] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   124.794] (II) Module wfb: vendor="X.Org Foundation"
[   124.794] 	compiled for 1.19.6, module version = 1.0.0
[   124.794] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   124.794] (II) Loading sub module "ramdac"
[   124.794] (II) LoadModule: "ramdac"
[   124.794] (II) Module "ramdac" already built-in
[   124.796] (WW) Falling back to old probe method for modesetting
[   124.796] (WW) Falling back to old probe method for vesa
[   124.796] (II) modeset(G0): using drv /dev/dri/card0
[   124.796] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   124.796] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   124.796] (==) NVIDIA(0): RGB weight 888
[   124.796] (==) NVIDIA(0): Default visual is TrueColor
[   124.796] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   124.796] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[   124.796] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   124.796] (**) NVIDIA(0): Enabling 2D acceleration
[   125.193] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK208) at PCI:1:0:0 (GPU-0)
[   125.193] (--) NVIDIA(0): Memory: 2097152 kBytes
[   125.193] (--) NVIDIA(0): VideoBIOS: 80.28.22.00.2d
[   125.193] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[   125.193] (II) NVIDIA(0): Validated MetaModes:
[   125.193] (II) NVIDIA(0):     "NULL"
[   125.193] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   125.193] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   125.193] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   125.193] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[   125.193] (==) modeset(G0): RGB weight 888
[   125.193] (==) modeset(G0): Default visual is TrueColor
[   125.193] (II) Loading sub module "glamoregl"
[   125.193] (II) LoadModule: "glamoregl"
[   125.193] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   125.200] (II) Module glamoregl: vendor="X.Org Foundation"
[   125.200] 	compiled for 1.19.6, module version = 1.0.0
[   125.200] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   125.200] (II) glamor: OpenGL accelerated X.org driver based.
[   125.247] (II) glamor: EGL version 1.4 (DRI2):
[   125.261] (II) modeset(G0): glamor initialized
[   125.264] (II) modeset(G0): Output eDP-1-1 has no monitor section
[   125.269] (II) modeset(G0): Output VGA-1-1 has no monitor section
[   125.278] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[   125.281] (II) modeset(G0): EDID for output eDP-1-1
[   125.281] (II) modeset(G0): Manufacturer: LGD  Model: 39f  Serial#: 0
[   125.281] (II) modeset(G0): Year: 2012  Week: 0
[   125.281] (II) modeset(G0): EDID Version: 1.3
[   125.281] (II) modeset(G0): Digital Display Input
[   125.281] (II) modeset(G0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   125.281] (II) modeset(G0): Gamma: 2.20
[   125.281] (II) modeset(G0): No DPMS capabilities specified
[   125.281] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   125.281] (II) modeset(G0): First detailed timing is preferred mode
[   125.281] (II) modeset(G0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[   125.281] (II) modeset(G0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   125.281] (II) modeset(G0): Manufacturer's mask: 0
[   125.281] (II) modeset(G0): Supported detailed timing:
[   125.281] (II) modeset(G0): clock: 69.3 MHz   Image Size:  345 x 194 mm
[   125.281] (II) modeset(G0): h_active: 1366  h_sync: 1398  h_sync_end 1430 h_blank_end 1478 h_border: 0
[   125.281] (II) modeset(G0): v_active: 768  v_sync: 770  v_sync_end 774 v_blanking: 782 v_border: 0
[   125.281] (II) modeset(G0):  LG Display
[   125.281] (II) modeset(G0):  LP156WH3-TLS2
[   125.281] (II) modeset(G0): EDID (in hex):
[   125.281] (II) modeset(G0): 	00ffffffffffff0030e49f0300000000
[   125.281] (II) modeset(G0): 	00160103802313780a05f59458569228
[   125.281] (II) modeset(G0): 	1e505400000001010101010101010101
[   125.281] (II) modeset(G0): 	010101010101121b567050000e302020
[   125.281] (II) modeset(G0): 	240059c2100000190000000000000000
[   125.281] (II) modeset(G0): 	00000000000000000000000000fe004c
[   125.281] (II) modeset(G0): 	4720446973706c61790a2020000000fe
[   125.281] (II) modeset(G0): 	004c503135365748332d544c533200e2
[   125.281] (II) modeset(G0): Printing probed modes for output eDP-1-1
[   125.281] (II) modeset(G0): Modeline "1366x768"x60.0   69.30  1366 1398 1430 1478  768 770 774 782 -hsync -vsync (46.9 kHz eP)
[   125.281] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   125.281] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   125.281] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   125.281] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   125.281] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   125.281] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   125.281] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   125.281] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   125.281] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   125.281] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   125.281] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   125.281] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   125.281] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   125.281] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   125.281] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   125.281] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   125.286] (II) modeset(G0): EDID for output VGA-1-1
[   125.294] (II) modeset(G0): EDID for output HDMI-1-1
[   125.295] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[   125.295] (==) modeset(G0): DPI set to (96, 96)
[   125.295] (II) Loading sub module "fb"
[   125.295] (II) LoadModule: "fb"
[   125.295] (II) Loading /usr/lib/xorg/modules/libfb.so
[   125.295] (II) Module fb: vendor="X.Org Foundation"
[   125.295] 	compiled for 1.19.6, module version = 1.0.0
[   125.295] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   125.295] (II) UnloadModule: "nouveau"
[   125.295] (II) Unloading nouveau
[   125.295] (II) UnloadModule: "vesa"
[   125.295] (II) Unloading vesa
[   125.295] (--) Depth 24 pixmap format is 32 bpp
[   125.350] (==) modeset(G0): Backing store enabled
[   125.350] (==) modeset(G0): Silken mouse enabled
[   125.351] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   125.407] (==) modeset(G0): DPMS enabled
[   125.407] (II) modeset(G0): [DRI2] Setup complete
[   125.407] (II) modeset(G0): [DRI2]   DRI driver: i965
[   125.407] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[   125.408] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[   125.408] (II) NVIDIA:     access.
[   125.421] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   125.421] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   125.421] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   125.421] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   125.421] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   125.421] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   125.421] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   125.421] (II) NVIDIA(0):     Config Options in the README.
[   125.433] (II) NVIDIA(0): Setting mode "NULL"
[   125.439] (==) NVIDIA(0): Disabling shared memory pixmaps
[   125.439] (==) NVIDIA(0): Backing store enabled
[   125.439] (==) NVIDIA(0): Silken mouse enabled
[   125.439] (==) NVIDIA(0): DPMS enabled
[   125.440] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[   125.440] (II) Loading sub module "dri2"
[   125.440] (II) LoadModule: "dri2"
[   125.440] (II) Module "dri2" already built-in
[   125.440] (II) NVIDIA(0): [DRI2] Setup complete
[   125.440] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   125.440] (--) RandR disabled
[   125.443] (II) Initializing extension GLX
[   125.443] (II) Indirect GLX disabled.
[   125.713] (II) modeset(G0): Damage tracking initialized
[   125.771] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   125.771] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   125.771] (II) LoadModule: "libinput"
[   125.771] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   125.775] (II) Module libinput: vendor="X.Org Foundation"
[   125.775] 	compiled for 1.19.3, module version = 0.26.0
[   125.775] 	Module class: X.Org XInput Driver
[   125.775] 	ABI class: X.Org XInput driver, version 24.1
[   125.775] (II) Using input driver 'libinput' for 'Power Button'
[   125.776] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[   125.776] (**) Power Button: always reports core events
[   125.776] (**) Option "Device" "/dev/input/event3"
[   125.776] (**) Option "_source" "server/udev"
[   125.776] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   125.776] (II) event3  - (II) Power Button: (II) device is a keyboard
[   125.776] (II) event3  - (II) Power Button: (II) device removed
[   125.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[   125.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   125.776] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   125.776] (II) event3  - (II) Power Button: (II) device is a keyboard
[   125.777] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[   125.777] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   125.777] (II) Using input driver 'libinput' for 'Video Bus'
[   125.777] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 42 paused 0
[   125.778] (**) Video Bus: always reports core events
[   125.778] (**) Option "Device" "/dev/input/event10"
[   125.778] (**) Option "_source" "server/udev"
[   125.778] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   125.778] (II) event10 - (II) Video Bus: (II) device is a keyboard
[   125.778] (II) event10 - (II) Video Bus: (II) device removed
[   125.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17/event10"
[   125.778] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   125.778] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   125.778] (II) event10 - (II) Video Bus: (II) device is a keyboard
[   125.779] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[   125.779] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   125.779] (II) Using input driver 'libinput' for 'Video Bus'
[   125.779] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 43 paused 0
[   125.779] (**) Video Bus: always reports core events
[   125.779] (**) Option "Device" "/dev/input/event9"
[   125.779] (**) Option "_source" "server/udev"
[   125.780] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   125.780] (II) event9  - (II) Video Bus: (II) device is a keyboard
[   125.780] (II) event9  - (II) Video Bus: (II) device removed
[   125.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input16/event9"
[   125.780] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   125.780] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   125.780] (II) event9  - (II) Video Bus: (II) device is a keyboard
[   125.781] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   125.781] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   125.781] (II) Using input driver 'libinput' for 'Power Button'
[   125.781] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[   125.781] (**) Power Button: always reports core events
[   125.781] (**) Option "Device" "/dev/input/event2"
[   125.781] (**) Option "_source" "server/udev"
[   125.782] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   125.782] (II) event2  - (II) Power Button: (II) device is a keyboard
[   125.782] (II) event2  - (II) Power Button: (II) device removed
[   125.782] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[   125.782] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   125.782] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   125.782] (II) event2  - (II) Power Button: (II) device is a keyboard
[   125.782] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   125.782] (II) No input driver specified, ignoring this device.
[   125.782] (II) This device may have been added with another device file.
[   125.783] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[   125.783] (II) No input driver specified, ignoring this device.
[   125.783] (II) This device may have been added with another device file.
[   125.783] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[   125.783] (II) No input driver specified, ignoring this device.
[   125.783] (II) This device may have been added with another device file.
[   125.783] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[   125.783] (II) No input driver specified, ignoring this device.
[   125.783] (II) This device may have been added with another device file.
[   125.784] (II) config/udev: Adding input device TOSHIBA Web Camera - HD: TOSHIB (/dev/input/event15)
[   125.784] (**) TOSHIBA Web Camera - HD: TOSHIB: Applying InputClass "libinput keyboard catchall"
[   125.784] (II) Using input driver 'libinput' for 'TOSHIBA Web Camera - HD: TOSHIB'
[   125.784] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 45 paused 0
[   125.784] (**) TOSHIBA Web Camera - HD: TOSHIB: always reports core events
[   125.784] (**) Option "Device" "/dev/input/event15"
[   125.784] (**) Option "_source" "server/udev"
[   125.785] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) is tagged by udev as: Keyboard
[   125.785] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) device is a keyboard
[   125.785] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) device removed
[   125.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input23/event15"
[   125.785] (II) XINPUT: Adding extended input device "TOSHIBA Web Camera - HD: TOSHIB" (type: KEYBOARD, id 10)
[   125.785] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) is tagged by udev as: Keyboard
[   125.785] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) device is a keyboard
[   125.786] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event14)
[   125.786] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "libinput keyboard catchall"
[   125.786] (II) Using input driver 'libinput' for 'SINO WEALTH USB KEYBOARD'
[   125.786] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 46 paused 0
[   125.786] (**) SINO WEALTH USB KEYBOARD: always reports core events
[   125.786] (**) Option "Device" "/dev/input/event14"
[   125.786] (**) Option "_source" "server/udev"
[   125.787] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) is tagged by udev as: Keyboard
[   125.787] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) device is a keyboard
[   125.787] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) device removed
[   125.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:258A:0001.0001/input/input22/event14"
[   125.787] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 11)
[   125.787] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) is tagged by udev as: Keyboard
[   125.787] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) device is a keyboard
[   125.788] (II) config/udev: Adding input device SINO WEALTH USB KEYBOARD (/dev/input/event16)
[   125.788] (**) SINO WEALTH USB KEYBOARD: Applying InputClass "libinput keyboard catchall"
[   125.788] (II) Using input driver 'libinput' for 'SINO WEALTH USB KEYBOARD'
[   125.789] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 47 paused 0
[   125.789] (**) SINO WEALTH USB KEYBOARD: always reports core events
[   125.789] (**) Option "Device" "/dev/input/event16"
[   125.789] (**) Option "_source" "server/udev"
[   125.789] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) is tagged by udev as: Keyboard
[   125.789] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) device is a keyboard
[   125.789] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) device removed
[   125.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:258A:0001.0002/input/input24/event16"
[   125.789] (II) XINPUT: Adding extended input device "SINO WEALTH USB KEYBOARD" (type: KEYBOARD, id 12)
[   125.790] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) is tagged by udev as: Keyboard
[   125.790] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) device is a keyboard
[   125.790] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event17)
[   125.790] (**) COMPANY USB Device: Applying InputClass "libinput keyboard catchall"
[   125.790] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[   125.791] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 48 paused 0
[   125.791] (**) COMPANY USB Device: always reports core events
[   125.791] (**) Option "Device" "/dev/input/event17"
[   125.791] (**) Option "_source" "server/udev"
[   125.791] (II) event17 - (II) COMPANY USB Device: (II) is tagged by udev as: Keyboard
[   125.792] (II) event17 - (II) COMPANY USB Device: (II) device is a keyboard
[   125.792] (II) event17 - (II) COMPANY USB Device: (II) device removed
[   125.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.0/0003:09DA:F613.0003/input/input25/event17"
[   125.792] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: KEYBOARD, id 13)
[   125.792] (II) event17 - (II) COMPANY USB Device: (II) is tagged by udev as: Keyboard
[   125.792] (II) event17 - (II) COMPANY USB Device: (II) device is a keyboard
[   125.792] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event19)
[   125.792] (**) COMPANY USB Device: Applying InputClass "libinput pointer catchall"
[   125.792] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[   125.850] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 49 paused 0
[   125.850] (**) COMPANY USB Device: always reports core events
[   125.850] (**) Option "Device" "/dev/input/event19"
[   125.850] (**) Option "_source" "server/udev"
[   125.851] (II) event19 - (II) COMPANY USB Device: (II) is tagged by udev as: Mouse
[   125.851] (II) event19 - (II) COMPANY USB Device: (II) device is a pointer
[   125.851] (II) event19 - (II) COMPANY USB Device: (II) device removed
[   125.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.1/0003:09DA:F613.0004/input/input26/event19"
[   125.851] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 14)
[   125.851] (**) Option "AccelerationScheme" "none"
[   125.851] (**) COMPANY USB Device: (accel) selected scheme none/0
[   125.851] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[   125.851] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[   125.851] (II) event19 - (II) COMPANY USB Device: (II) is tagged by udev as: Mouse
[   125.851] (II) event19 - (II) COMPANY USB Device: (II) device is a pointer
[   125.852] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse1)
[   125.852] (II) No input driver specified, ignoring this device.
[   125.852] (II) This device may have been added with another device file.
[   125.853] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event20)
[   125.853] (**) COMPANY USB Device: Applying InputClass "libinput keyboard catchall"
[   125.853] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[   125.854] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 50 paused 0
[   125.854] (**) COMPANY USB Device: always reports core events
[   125.854] (**) Option "Device" "/dev/input/event20"
[   125.854] (**) Option "_source" "server/udev"
[   125.855] (II) event20 - (II) COMPANY USB Device: (II) is tagged by udev as: Keyboard
[   125.855] (II) event20 - (II) COMPANY USB Device: (II) device is a keyboard
[   125.855] (II) event20 - (II) COMPANY USB Device: (II) device removed
[   125.855] (II) libinput: COMPANY USB Device: needs a virtual subdevice
[   125.855] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.2/0003:09DA:F613.0005/input/input27/event20"
[   125.855] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 15)
[   125.855] (**) Option "AccelerationScheme" "none"
[   125.855] (**) COMPANY USB Device: (accel) selected scheme none/0
[   125.855] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[   125.855] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[   125.856] (II) event20 - (II) COMPANY USB Device: (II) is tagged by udev as: Keyboard
[   125.856] (II) event20 - (II) COMPANY USB Device: (II) device is a keyboard
[   125.856] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[   125.856] (II) No input driver specified, ignoring this device.
[   125.856] (II) This device may have been added with another device file.
[   125.857] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[   125.857] (II) No input driver specified, ignoring this device.
[   125.857] (II) This device may have been added with another device file.
[   125.857] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[   125.857] (II) No input driver specified, ignoring this device.
[   125.857] (II) This device may have been added with another device file.
[   125.857] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   125.857] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   125.857] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   125.859] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 51 paused 0
[   125.859] (**) AT Translated Set 2 keyboard: always reports core events
[   125.859] (**) Option "Device" "/dev/input/event0"
[   125.859] (**) Option "_source" "server/udev"
[   125.859] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[   125.859] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[   125.859] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[   125.859] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   125.859] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[   125.860] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[   125.860] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[   125.860] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
[   125.860] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   125.860] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   125.862] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 52 paused 0
[   125.862] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   125.862] (**) Option "Device" "/dev/input/event18"
[   125.862] (**) Option "_source" "server/udev"
[   125.862] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[   125.862] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[   125.862] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[   125.862] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input21/event18"
[   125.862] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[   125.862] (**) Option "AccelerationScheme" "none"
[   125.862] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   125.862] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   125.862] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   125.863] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[   125.863] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[   125.863] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   125.863] (II) No input driver specified, ignoring this device.
[   125.863] (II) This device may have been added with another device file.
[   125.863] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   125.863] (II) No input driver specified, ignoring this device.
[   125.863] (II) This device may have been added with another device file.
[   125.864] (II) config/udev: Adding input device Toshiba WMI hotkeys (/dev/input/event5)
[   125.864] (II) No input driver specified, ignoring this device.
[   125.864] (II) This device may have been added with another device file.
[   125.866] (**) COMPANY USB Device: Applying InputClass "libinput keyboard catchall"
[   125.866] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[   125.866] (II) systemd-logind: returning pre-existing fd for /dev/input/event20 13:84
[   125.866] (**) COMPANY USB Device: always reports core events
[   125.866] (**) Option "Device" "/dev/input/event20"
[   125.866] (**) Option "_source" "_driver/libinput"
[   125.866] (II) libinput: COMPANY USB Device: is a virtual subdevice
[   125.866] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.2/0003:09DA:F613.0005/input/input27/event20"
[   125.866] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: KEYBOARD, id 18)
[   130.930] (**) Option "fd" "39"
[   130.930] (II) event3  - (II) Power Button: (II) device removed
[   130.930] (**) Option "fd" "42"
[   130.930] (II) event10 - (II) Video Bus: (II) device removed
[   130.930] (**) Option "fd" "43"
[   130.930] (II) event9  - (II) Video Bus: (II) device removed
[   130.930] (**) Option "fd" "44"
[   130.930] (II) event2  - (II) Power Button: (II) device removed
[   130.930] (**) Option "fd" "45"
[   130.930] (II) event15 - (II) TOSHIBA Web Camera - HD: TOSHIB: (II) device removed
[   130.931] (**) Option "fd" "46"
[   130.931] (II) event14 - (II) SINO WEALTH USB KEYBOARD: (II) device removed
[   130.931] (**) Option "fd" "47"
[   130.931] (II) event16 - (II) SINO WEALTH USB KEYBOARD: (II) device removed
[   130.931] (**) Option "fd" "48"
[   130.931] (II) event17 - (II) COMPANY USB Device: (II) device removed
[   130.931] (**) Option "fd" "49"
[   130.931] (II) event19 - (II) COMPANY USB Device: (II) device removed
[   130.931] (**) Option "fd" "50"
[   130.931] (**) Option "fd" "51"
[   130.931] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[   130.931] (**) Option "fd" "52"
[   130.931] (II) event18 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[   130.931] (**) Option "fd" "50"
[   130.931] (II) event20 - (II) COMPANY USB Device: (II) device removed
[   130.936] (II) UnloadModule: "libinput"
[   130.936] (II) systemd-logind: not releasing fd for 13:84, still in use
[   130.936] (II) UnloadModule: "libinput"
[   130.936] (II) systemd-logind: releasing fd for 13:82
[   131.210] (II) UnloadModule: "libinput"
[   131.210] (II) systemd-logind: releasing fd for 13:64
[   131.230] (II) UnloadModule: "libinput"
[   131.230] (II) systemd-logind: releasing fd for 13:84
[   131.250] (II) UnloadModule: "libinput"
[   131.250] (II) systemd-logind: releasing fd for 13:83
[   131.290] (II) UnloadModule: "libinput"
[   131.290] (II) systemd-logind: releasing fd for 13:81
[   131.313] (II) UnloadModule: "libinput"
[   131.313] (II) systemd-logind: releasing fd for 13:80
[   131.330] (II) UnloadModule: "libinput"
[   131.330] (II) systemd-logind: releasing fd for 13:78
[   131.353] (II) UnloadModule: "libinput"
[   131.353] (II) systemd-logind: releasing fd for 13:79
[   131.390] (II) UnloadModule: "libinput"
[   131.390] (II) systemd-logind: releasing fd for 13:66
[   131.410] (II) UnloadModule: "libinput"
[   131.410] (II) systemd-logind: releasing fd for 13:73
[   131.450] (II) UnloadModule: "libinput"
[   131.450] (II) systemd-logind: releasing fd for 13:74
[   131.500] (II) UnloadModule: "libinput"
[   131.500] (II) systemd-logind: releasing fd for 13:67
[   131.552] (II) NVIDIA(GPU-0): Deleting GPU-0
[   131.552] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   131.552] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   131.552] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   131.553] (II) Server terminated successfully (0). Closing log file.
seth wrote:

Switching VTs fails?
In case please add the dmesg output to the above list.

Yes, it fails too.
How do you want me to do that? I can run startx (it crashes and I reboot). Do you want me to then send the dmesg output?

Offline

#5 2018-01-25 17:13:49

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,449

Re: Can't start i3 window manager [SOLVED]

Yep, hybrid system.

Two options:

  1. Run everything on the intel card to save power and only use the nvidia card on demand - follow https://wiki.archlinux.org/index.php/Bumblebee

  2. You want maximum performance at the cost of battery life and use the nvidia card primarily - follow https://wiki.archlinux.org/index.php/NV … ing_nvidia

note that these are mutually exclusive so pick one and stick to it.

Last edited by V1del (2018-01-25 17:20:44)

Offline

#6 2018-01-25 17:15:34

lost_not_found
Member
Registered: 2018-01-25
Posts: 5

Re: Can't start i3 window manager [SOLVED]

seth wrote:

and the only way out that I see is the off button

Switching VTs fails?
In case please add the dmesg output to the above list.

I think running startx /usr/bin/i3 resulted in the following:

[Jan25 17:10] ACPI Warning: \_SB.PCI0.P0P2.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[  +0.024646] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[  +0.000132] caller _nv029056rm+0x57/0x90 [nvidia] mapping multiple BARs
[  +0.363251] nvidia-modeset: Allocated GPU:0 (GPU-1c7fb540-26f4-ca9c-4385-b4dc04a804b3) @ PCI:0000:01:00.0
[  +0.000234] nvidia-modeset: Freed GPU:0 (GPU-1c7fb540-26f4-ca9c-4385-b4dc04a804b3) @ PCI:0000:01:00.0
[  +0.537339] nvidia-modeset: Allocated GPU:0 (GPU-1c7fb540-26f4-ca9c-4385-b4dc04a804b3) @ PCI:0000:01:00.0
[  +0.000248] nvidia-modeset: Freed GPU:0 (GPU-1c7fb540-26f4-ca9c-4385-b4dc04a804b3) @ PCI:0000:01:00.0
[  +2.888096] toshiba_acpi: Unknown event received 8e

Offline

#7 2018-01-25 17:19:50

seth
Member
Registered: 2012-09-03
Posts: 64,272

Re: Can't start i3 window manager [SOLVED]

I meant the entire dmesg, but since it's a misconfigured optimus system, follow V1del's links first.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2018-01-25 17:28:40

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,365
Website

Re: Can't start i3 window manager [SOLVED]

And please required the actual requested information in the future.  The command I referenced in the wiki would give us the id's of both graphics cards rather than us having to read between the lines to infer that it must be a hybrid systems as that line has "3D" and not "VGA".

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#9 2018-01-25 17:41:07

lost_not_found
Member
Registered: 2018-01-25
Posts: 5

Re: Can't start i3 window manager [SOLVED]

V1del wrote:

Yep, hybrid system.

Two options:

  1. Run everything on the intel card to save power and only use the nvidia card on demand - follow https://wiki.archlinux.org/index.php/Bumblebee

  2. You want maximum performance at the cost of battery life and use the nvidia card primarily - follow https://wiki.archlinux.org/index.php/NV … ing_nvidia

note that these are mutually exclusive so pick one and stick to it.

Went with option 2 and problem solved. Thanks

All I did was add the following lines to .xinitrc 

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Offline

#10 2018-01-25 23:47:27

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,449

Re: Can't start i3 window manager [SOLVED]

Yup, that's correct, please mark as [SOLVED] by editing the title of your initial post.

Offline

#11 2018-01-26 15:56:44

lost_not_found
Member
Registered: 2018-01-25
Posts: 5

Re: Can't start i3 window manager [SOLVED]

Trilby wrote:

And please required the actual requested information in the future.  The command I referenced in the wiki would give us the id's of both graphics cards rather than us having to read between the lines to infer that it must be a hybrid systems as that line has "3D" and not "VGA".

You're right. Had I done the command 

$ lspci | grep -e VGA -e 3D

as specified in Xorg it would show an entry for VGA and another for 3D.
Well, at least now I see why they grep for both things in the command. I will make sure to be more careful in the future.

V1del wrote:

Yup, that's correct, please mark as [SOLVED] by editing the title of your initial post.

Done smile

Offline

#12 2021-02-14 08:38:58

thxmtmtmt
Member
Registered: 2021-02-14
Posts: 1

Re: Can't start i3 window manager [SOLVED]

This is an old post, but there are ~10 of them on the internet with the same issue...and I just went through this problem and might have an additional insight.

I agree that

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

can often solve the problem of a black screen after installing the latest nvidia driver in i3wm. However, I just went through this and one reason that

xrandr --auto

can help is that the Nvidia driver can change the system name of the display. If there are any xrandr exec statements in the i3 config that specify an output, and the driver changes the system's name for the output, the result will be a black screen.

For example, on my laptop, running xrandr showed that my display was called eDP-1, and I had an xrandr exec statement in my i3 config that specified that output. After installing the Nvidia driver, my display became eDP-1-1, and so that exec statement failed.

Last edited by thxmtmtmt (2021-02-14 08:40:03)

Offline

#13 2021-02-14 10:24:40

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,449

Re: Can't start i3 window manager [SOLVED]

Well yes, you still need to reconfigure the active screens once you change the provider outputsource and whether you do that with the --auto or with specifically targeted name doesn't really matter.

Closing this old thread.

Offline

Pages: 1

Topic closed

Board footer

Powered by FluxBB