You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2018-01-26 16:43:28
- pdrocaldeira
- Member
- From: Brazil - Belo Horizonte
- Registered: 2015-10-11
- Posts: 30
Can't use bluetooth headset
Hello!
So title says everything.
I have this board:
03:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc QCA9565 / AR9565 Wireless Network Adapter
Kernel driver in use: ath9k
Kernel modules: ath9kAlready tried:
modprobe ath9k btcoex_enable=1But still Bluetoothctl and hcitool dev doesn't show anything.
Tried BIOS but it doesn't have anything useful. Kind of weird.
Tried "Network" button on my laptop but doesn't solve anything too.
Can somebody help me, please?
Offline
#2 2018-01-26 16:46:46
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,104
Re: Can't use bluetooth headset
And the bluetooth.service is enabled? And all other relevant packages installed? Have you read https://wiki.archlinux.org/index.php/Bl … stallation and https://wiki.archlinux.org/index.php/Bluetooth_headset ?
If this doesn't answer your question post
lsmod | grep btusb
systemctl status bluetooth.service
dmesgLast edited by V1del (2018-01-26 16:52:48)
Offline
#3 2018-01-26 16:50:17
- pdrocaldeira
- Member
- From: Brazil - Belo Horizonte
- Registered: 2015-10-11
- Posts: 30
Re: Can't use bluetooth headset
Forgot about that info.
Bluetooth service is enabled.
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2018-01-26 14:36:55 -02; 11min ago
Docs: man:bluetoothd(8)
Main PID: 665 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 4915)
CGroup: /system.slice/bluetooth.service
└─665 /usr/lib/bluetooth/bluetoothd
Jan 26 14:36:54 pedro_aspire systemd[1]: Starting Bluetooth service...
Jan 26 14:36:55 pedro_aspire bluetoothd[665]: Bluetooth daemon 5.48
Jan 26 14:36:55 pedro_aspire systemd[1]: Started Bluetooth service.
Jan 26 14:36:55 pedro_aspire bluetoothd[665]: Starting SDP server
Jan 26 14:36:55 pedro_aspire bluetoothd[665]: Bluetooth management interface 1.14 initializedAnd already read both and have all packages installed.
pacman -Q | grep bluez
bluez 5.48-1
bluez-hcitool 5.45-1
bluez-libs 5.48-1
bluez-tools 0.2.0-1
bluez-utils 5.48-1pacman -Q | grep bluetooth
gnome-bluetooth 3.26.0+1+g3875844-1
pulseaudio-bluetooth 11.1-1Edit: Thanks!
Last edited by pdrocaldeira (2018-01-26 16:50:30)
Offline
#4 2018-01-26 17:05:04
- pdrocaldeira
- Member
- From: Brazil - Belo Horizonte
- Registered: 2015-10-11
- Posts: 30
Re: Can't use bluetooth headset
btusb 53248 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
btintel 16384 1 btusb
bluetooth 626688 12 btrtl,btintel,bnep,btbcm,ath3k,btusb
usbcore 282624 8 uvcvideo,ehci_hcd,xhci_pci,rtsx_usb,ath3k,btusb,xhci_hcd,ehci_pci[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2017-11-17
[ 0.000000] Linux version 4.14.14-1-ARCH (builduser@heftig-12517) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Fri Jan 19 18:42:04 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../intel-ucode.img,../initramfs-linux.img
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ecb8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ecb9000-0x000000008f5b8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f5b9000-0x000000009c9cdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c9ce000-0x000000009cebdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebe000-0x000000009cfbdfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbe000-0x000000009cffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cffe000-0x000000009cffefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Acer Aspire E5-573/ZORO_BH, BIOS V1.37 02/16/2016
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 009CFFF000 mask 7FFFFFF000 uncachable
[ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0x9cfff000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9cfff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1c0-0x000fe1cf] mapped at [ffffffffff2001c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff96cb80098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3562d000, 0x3562dfff] PGTABLE
[ 0.000000] BRK [0x3562e000, 0x3562efff] PGTABLE
[ 0.000000] BRK [0x3562f000, 0x3562ffff] PGTABLE
[ 0.000000] BRK [0x35630000, 0x35630fff] PGTABLE
[ 0.000000] BRK [0x35631000, 0x35631fff] PGTABLE
[ 0.000000] BRK [0x35632000, 0x35632fff] PGTABLE
[ 0.000000] BRK [0x35633000, 0x35633fff] PGTABLE
[ 0.000000] BRK [0x35634000, 0x35634fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f787000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000009CFCE188 0000DC (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFED000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFD7000 010B22 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000009CFB7000 000040
[ 0.000000] ACPI: TCPA 0x000000009CFFC000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFA000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFF9000 000496 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFF8000 00004B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: TPM2 0x000000009CFF7000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFF3000 003548 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF2000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF1000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFF0000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFEF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFEE000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFEC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFEB000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFEA000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFE9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFE8000 000539 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD6000 000B74 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD0000 005ACC (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFCF000 0000D4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: CSRT 0x000000009CFCD000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFCC000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25effa000-0x25effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008ecb8fff]
[ 0.000000] node 0: [mem 0x000000008f5b9000-0x000000009c9cdfff]
[ 0.000000] node 0: [mem 0x000000009cffe000-0x000000009cffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[ 0.000000] On node 0 totalpages: 2076780
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9924 pages used for memmap
[ 0.000000] DMA32 zone: 635087 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ecb9000-0x8f5b8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c9ce000-0x9cebdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebe000-0x9cfbdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbe000-0x9cffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfff000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff96cddec00000 s134168 r8192 d29672 u524288
[ 0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2044307
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../intel-ucode.img,../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8077788K/8307120K available (10252K kernel code, 1157K rwdata, 2792K rodata, 1360K init, 992K bss, 229332K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29119 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2199.922 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.17 BogoMIPS (lpj=7333073)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.020771] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.020797] Security Framework initialized
[ 0.020798] Yama: becoming mindful.
[ 0.022274] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023051] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023083] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023108] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023317] CPU: Physical Processor ID: 0
[ 0.023318] CPU: Processor Core ID: 0
[ 0.023323] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.023323] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023339] mce: CPU supports 7 MCE banks
[ 0.023348] CPU0: Thermal monitoring enabled (TM1)
[ 0.023360] process: using mwait in idle threads
[ 0.023363] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023364] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.023365] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.023454] Freeing SMP alternatives memory: 24K
[ 0.025172] smpboot: Max logical packages: 2
[ 0.025177] DMAR: Host address width 39
[ 0.025179] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.025187] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.025189] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.025194] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.025195] DMAR: RMRR base: 0x0000009ce64000 end: 0x0000009ce83fff
[ 0.025196] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[ 0.025197] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.025199] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.025200] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.025201] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.025201] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.025670] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.025671] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.026309] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059327] TSC deadline timer enabled
[ 0.059329] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.070006] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.070053] ... version: 3
[ 0.070053] ... bit width: 48
[ 0.070054] ... generic registers: 4
[ 0.070055] ... value mask: 0000ffffffffffff
[ 0.070055] ... max period: 00007fffffffffff
[ 0.070056] ... fixed-purpose events: 3
[ 0.070057] ... event mask: 000000070000000f
[ 0.076682] Hierarchical SRCU implementation.
[ 0.090148] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.096668] smp: Bringing up secondary CPUs ...
[ 0.123344] x86: Booting SMP configuration:
[ 0.123345] .... node #0, CPUs: #1 #2 #3
[ 0.178273] smp: Brought up 1 node, 4 CPUs
[ 0.178273] smpboot: Total of 4 processors activated (17606.68 BogoMIPS)
[ 0.180276] devtmpfs: initialized
[ 0.180276] x86/mm: Memory block size: 128MB
[ 0.180681] PM: Registering ACPI NVS region [mem 0x9cebe000-0x9cfbdfff] (1048576 bytes)
[ 0.180681] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.180681] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.180681] pinctrl core: initialized pinctrl subsystem
[ 0.180681] RTC time: 16:58:33, date: 01/26/18
[ 0.180681] NET: Registered protocol family 16
[ 0.180681] cpuidle: using governor ladder
[ 0.180681] cpuidle: using governor menu
[ 0.180681] Simple Boot Flag at 0x44 set to 0x1
[ 0.180681] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.180681] ACPI: bus type PCI registered
[ 0.180681] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.180681] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180681] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.180681] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.180681] PCI: Using configuration type 1 for base access
[ 0.180732] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.180732] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.180732] ACPI: Added _OSI(Module Device)
[ 0.180732] ACPI: Added _OSI(Processor Device)
[ 0.180732] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180732] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183554] ACPI: Executed 16 blocks of module-level executable AML code
[ 0.187788] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.189321] ACPI: Dynamic OEM Table Load:
[ 0.189329] ACPI: SSDT 0xFFFF96CDD48AB800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.190310] ACPI: Dynamic OEM Table Load:
[ 0.190319] ACPI: SSDT 0xFFFF96CDD4EE0800 0005AA (v02 PmRef ApIst 00003000 INTL 20120816)
[ 0.193459] ACPI: Dynamic OEM Table Load:
[ 0.193466] ACPI: SSDT 0xFFFF96CDD48A2000 000119 (v02 PmRef ApCst 00003000 INTL 20120816)
[ 0.194277] ACPI: EC: EC started
[ 0.194277] ACPI: EC: interrupt blocked
[ 0.194495] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.194495] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.194495] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.194495] ACPI: Interpreter enabled
[ 0.194495] ACPI: (supports S0 S3 S4 S5)
[ 0.194495] ACPI: Using IOAPIC for interrupt routing
[ 0.194495] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.194495] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.205704] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.205710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.206788] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.206789] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.207691] PCI host bridge to bus 0000:00
[ 0.207694] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.207695] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.207697] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.207699] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[ 0.207700] pci_bus 0000:00: root bus resource [mem 0xfe101000-0xfe113fff window]
[ 0.207702] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.207711] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.208025] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.208037] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 0.208044] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.208048] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.208383] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.208393] pci 0000:00:03.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[ 0.208724] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.208744] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[ 0.208801] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.209097] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.209117] pci 0000:00:16.0: reg 0x10: [mem 0xc121b000-0xc121b01f 64bit]
[ 0.209177] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.209470] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.209489] pci 0000:00:1b.0: reg 0x10: [mem 0xc1214000-0xc1217fff 64bit]
[ 0.209546] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.209860] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.209927] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.213604] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[ 0.213673] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.214014] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.214082] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.214431] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.215051] pci 0000:00:1d.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[ 0.216861] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.217160] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.217558] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.217573] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.217580] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.217587] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.217593] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.217600] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.217607] pci 0000:00:1f.2: reg 0x24: [mem 0xc1218000-0xc12187ff]
[ 0.217642] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.217925] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.217942] pci 0000:00:1f.3: reg 0x10: [mem 0xc121a000-0xc121a0ff 64bit]
[ 0.217960] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.218301] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.218364] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.218395] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.218422] pci 0000:02:00.0: reg 0x18: [mem 0xc1104000-0xc1104fff 64bit]
[ 0.218439] pci 0000:02:00.0: reg 0x20: [mem 0xc1100000-0xc1103fff 64bit]
[ 0.218534] pci 0000:02:00.0: supports D1 D2
[ 0.218535] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226695] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.226698] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.226701] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.226760] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.226793] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff 64bit]
[ 0.226845] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.226916] pci 0000:03:00.0: supports D1 D2
[ 0.226917] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240034] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.240039] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.242129] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.242185] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.242239] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.242292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.242345] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.242399] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.242453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.242507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.243334] ACPI: EC: interrupt unblocked
[ 0.243334] ACPI: EC: event unblocked
[ 0.243334] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.243334] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.280123] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 0.283349] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.283349] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.283349] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.283349] vgaarb: loaded
[ 0.328467] EDAC MC: Ver: 3.0.0
[ 0.330024] PCI: Using ACPI for IRQ routing
[ 0.334109] PCI: pci_cache_line_size set to 64 bytes
[ 0.334144] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.334145] e820: reserve RAM buffer [mem 0x8ecb9000-0x8fffffff]
[ 0.334146] e820: reserve RAM buffer [mem 0x9c9ce000-0x9fffffff]
[ 0.334147] e820: reserve RAM buffer [mem 0x9cfff000-0x9fffffff]
[ 0.334148] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 0.334235] NetLabel: Initializing
[ 0.334236] NetLabel: domain hash size = 128
[ 0.334237] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.334250] NetLabel: unlabeled traffic allowed by default
[ 0.337003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.337009] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.339030] clocksource: Switched to clocksource hpet
[ 0.345753] VFS: Disk quotas dquot_6.6.0
[ 0.345772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.345834] pnp: PnP ACPI init
[ 0.346063] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.346065] system 00:00: [io 0xffff] has been reserved
[ 0.346067] system 00:00: [io 0xffff] has been reserved
[ 0.346068] system 00:00: [io 0xffff] has been reserved
[ 0.346070] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.346072] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.346077] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346132] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.346171] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.346175] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.346198] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.346785] system 00:04: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.346789] system 00:04: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.346791] system 00:04: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.346794] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347287] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.347288] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.347290] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.347292] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.347293] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.347295] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.347297] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.347299] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.347301] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.347303] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.347304] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[ 0.347306] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[ 0.347310] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347544] pnp: PnP ACPI: found 6 devices
[ 0.353483] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.353488] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.353498] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.353501] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.353503] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.353519] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[ 0.353524] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.353527] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.353529] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.353532] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.353536] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
[ 0.353539] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.353544] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.353546] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.353550] pci 0000:00:1c.2: bridge window [mem 0xc1100000-0xc11fffff]
[ 0.353558] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1080000-0xc108ffff pref]
[ 0.353559] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.353563] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 0.353571] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.353573] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.353574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.353576] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
[ 0.353577] pci_bus 0000:00: resource 8 [mem 0xfe101000-0xfe113fff window]
[ 0.353579] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.353580] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[ 0.353582] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[ 0.353583] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.353585] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[ 0.353586] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[ 0.353700] NET: Registered protocol family 2
[ 0.353839] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.353952] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.354119] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.354154] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.354178] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.354236] NET: Registered protocol family 1
[ 0.354249] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.354343] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.354344] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.370131] PCI: CLS 64 bytes, default 64
[ 0.370163] Unpacking initramfs...
[ 0.498354] Freeing initrd memory: 8676K
[ 0.498382] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[ 0.498395] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.498398] software IO TLB [mem 0x989ce000-0x9c9ce000] (64MB) mapped at [ffff96cc189ce000-ffff96cc1c9cdfff]
[ 0.498593] Scanning for low memory corruption every 60 seconds
[ 0.499151] Initialise system trusted keyrings
[ 0.499161] Key type blacklist registered
[ 0.499214] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.500210] zbud: loaded
[ 0.501497] Key type asymmetric registered
[ 0.501532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.501563] io scheduler noop registered
[ 0.501564] io scheduler deadline registered
[ 0.501603] io scheduler cfq registered (default)
[ 0.501604] io scheduler mq-deadline registered
[ 0.501604] io scheduler kyber registered
[ 0.501625] io scheduler bfq registered
[ 0.502263] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
[ 0.502281] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
[ 0.502295] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
[ 0.502313] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.502354] intel_idle: MWAIT substates: 0x11142120
[ 0.502355] intel_idle: v0.4.1 model 0x3D
[ 0.502520] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.502820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.503562] rtc_cmos 00:01: RTC can wake from S4
[ 0.503689] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.503717] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.503732] intel_pstate: Intel P-state driver initializing
[ 0.503947] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.504007] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.504517] NET: Registered protocol family 10
[ 0.513019] Segment Routing with IPv6
[ 0.513068] NET: Registered protocol family 17
[ 0.513736] RAS: Correctable Errors collector initialized.
[ 0.513819] microcode: sig=0x306d4, pf=0x40, revision=0x28
[ 0.514092] microcode: Microcode Update Driver: v2.2.
[ 0.514117] sched_clock: Marking stable (514062548, 0)->(517414916, -3352368)
[ 0.514674] registered taskstats version 1
[ 0.514687] Loading compiled-in X.509 certificates
[ 0.514725] zswap: loaded using pool lzo/zbud
[ 0.521097] Key type big_key registered
[ 0.521659] Magic number: 2:64:996
[ 0.521712] memory memory39: hash matches
[ 0.521756] rtc_cmos 00:01: setting system clock to 2018-01-26 16:58:34 UTC (1516985914)
[ 0.524401] Freeing unused kernel memory: 1360K
[ 0.524402] Write protecting the kernel read-only data: 16384k
[ 0.525014] Freeing unused kernel memory: 2016K
[ 0.528703] Freeing unused kernel memory: 1304K
[ 0.585990] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.585992] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.586571] sdhci: Secure Digital Host Controller Interface driver
[ 0.586572] sdhci: Copyright(c) Pierre Ossman
[ 0.588046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.598252] ACPI: bus type USB registered
[ 0.598277] usbcore: registered new interface driver usbfs
[ 0.598373] usbcore: registered new interface driver hub
[ 0.598401] usbcore: registered new device driver usb
[ 0.599553] SCSI subsystem initialized
[ 0.600160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.603147] ehci-pci: EHCI PCI platform driver
[ 0.603457] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.603464] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.603477] ehci-pci 0000:00:1d.0: debug port 2
[ 0.607397] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.607416] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1219000
[ 0.610041] libata version 3.00 loaded.
[ 0.623382] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.623570] hub 1-0:1.0: USB hub found
[ 0.623579] hub 1-0:1.0: 2 ports detected
[ 0.623811] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.623918] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.623920] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.623941] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.623946] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.625026] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 0.625031] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.625305] hub 2-0:1.0: USB hub found
[ 0.625317] hub 2-0:1.0: 11 ports detected
[ 0.625979] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.625982] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.626112] hub 3-0:1.0: USB hub found
[ 0.626120] hub 3-0:1.0: 4 ports detected
[ 0.626224] usb: port power management may be unreliable
[ 0.626313] ahci 0000:00:1f.2: version 3.0
[ 0.636544] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[ 0.636547] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.636929] scsi host0: ahci
[ 0.637170] scsi host1: ahci
[ 0.637350] scsi host2: ahci
[ 0.637417] ata1: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218100 irq 46
[ 0.637419] ata2: SATA max UDMA/133 abar m2048@0xc1218000 port 0xc1218180 irq 46
[ 0.637420] ata3: DUMMY
[ 0.951046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.951071] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.951943] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 0.951948] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.952851] ata1.00: configured for UDMA/133
[ 0.953212] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[ 0.953390] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 0.953407] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.954527] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[ 0.959770] ata2.00: configured for UDMA/100
[ 0.965593] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
[ 0.982696] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.982699] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.982713] sd 0:0:0:0: [sda] Write Protect is off
[ 0.982715] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.982737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.000230] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.000233] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.000423] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.072372] sda: sda1
[ 1.072775] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.110503] hub 1-1:1.0: USB hub found
[ 1.110601] hub 1-1:1.0: 8 ports detected
[ 1.223375] usb 2-7: new high-speed USB device number 3 using xhci_hcd
[ 1.413564] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.496737] usb 2-8: new high-speed USB device number 4 using xhci_hcd
[ 1.516740] tsc: Refined TSC clocksource calibration: 2199.999 MHz
[ 1.516747] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb631c647b, max_idle_ns: 440795226700 ns
[ 2.530153] clocksource: Switched to clocksource tsc
[ 2.794951] random: crng init done
[ 3.158833] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.268667] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.283532] systemd[1]: Detected architecture x86-64.
[ 3.316054] systemd[1]: Set hostname to <pedro_aspire>.
[ 5.427331] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.427778] systemd[1]: Reached target Swap.
[ 5.428152] systemd[1]: Reached target Remote File Systems.
[ 5.429169] systemd[1]: Created slice System Slice.
[ 5.492730] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.493302] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.493872] systemd[1]: Listening on udev Kernel Socket.
[ 6.049126] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 6.246665] systemd-journald[207]: Received request to flush runtime journal from PID 1
[ 6.431157] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.431182] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.666233] vboxdrv: loading out-of-tree module taints kernel.
[ 6.671171] vboxdrv: Found 4 processor cores
[ 6.690173] vboxdrv: TSC mode is Invariant, tentative frequency 2199994858 Hz
[ 6.690174] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
[ 6.765201] VBoxPciLinuxInit
[ 6.906538] vboxpci: IOMMU not found (not registered)
[ 6.912540] VBoxNetAdp: Successfully started.
[ 6.953353] VBoxNetFlt: Successfully started.
[ 10.594933] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 10.594954] ACPI: Power Button [PWRB]
[ 10.595043] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 10.595056] ACPI: Sleep Button [SLPB]
[ 10.595338] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 10.595489] ACPI: Lid Switch [LID0]
[ 10.595576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 10.595603] ACPI: Power Button [PWRF]
[ 10.725596] ACPI: AC Adapter [ACAD] (on-line)
[ 10.994507] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.071026] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 11.071055] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.083652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.118427] ACPI: Battery Slot [BAT1] (battery present)
[ 11.121984] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 11.122051] thermal LNXTHERM:00: registered as thermal_zone0
[ 11.122052] ACPI: Thermal Zone [TZ01] (47 C)
[ 11.133617] Linux agpgart interface v0.103
[ 11.569031] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 11.569033] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.569034] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.569035] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.569036] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.744729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.744737] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.754412] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffb0c941069000, 1c:39:47:0c:a0:35, XID 14100800 IRQ 48
[ 11.754415] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.773540] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.934387] input: SYN1B81:01 06CB:2970 Touchpad as /devices/pci0000:00/INT3432:00/i2c-0/i2c-SYN1B81:01/0018:06CB:2970.0001/input/input7
[ 11.934476] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B81:01 06CB:2970] on i2c-SYN1B81:01
[ 11.951038] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 11.951069] acer_wmi: Function bitmap for Communication Button: 0x1
[ 11.973739] input: Acer WMI hotkeys as /devices/virtual/input/input12
[ 12.269838] AVX2 version of gcm_enc/dec engaged.
[ 12.269840] AES CTR mode by8 optimization enabled
[ 12.313854] [drm] Memory usable by graphics device = 4096M
[ 12.313857] [drm] Replacing VGA console driver
[ 12.315134] Console: switching to colour dummy device 80x25
[ 12.320764] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.320764] [drm] Driver supports precise vblank timestamp query.
[ 12.322813] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.328715] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 12.330011] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.330178] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 12.330294] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.343122] fbcon: inteldrmfb (fb0) is primary device
[ 12.388951] iTCO_vendor_support: vendor-support=0
[ 12.463090] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.463092] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.463093] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.463094] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 12.463095] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 12.463096] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 12.504610] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 12.505382] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 12.648678] ath: phy0: WB335 2-ANT card detected
[ 12.648679] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.655397] ath: phy0: Enable LNA combining
[ 12.656900] ath: phy0: ASPM enabled: 0x42
[ 12.656902] ath: EEPROM regdomain: 0x6c
[ 12.656902] ath: EEPROM indicates we should expect a direct regpair map
[ 12.656904] ath: Country alpha2 being used: 00
[ 12.656904] ath: Regpair used: 0x6c
[ 12.786664] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.786716] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 12.786824] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.991992] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 12.992078] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 12.992157] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 12.992238] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 12.992315] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 13.003941] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.004357] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffb0c941e80000, irq=19
[ 13.307804] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 13.444948] Console: switching to colour frame buffer device 170x48
[ 13.464429] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.597036] mousedev: PS/2 mouse device common for all mice
[ 13.602494] usb 2-5: USB disconnect, device number 2
[ 13.958886] usbcore: registered new interface driver rtsx_usb
[ 13.965973] media: Linux media interface: v0.10
[ 14.030096] Linux video capture interface: v2.00
[ 14.144151] Bluetooth: Core ver 2.22
[ 14.144167] NET: Registered protocol family 31
[ 14.144168] Bluetooth: HCI device and connection manager initialized
[ 14.144171] Bluetooth: HCI socket layer initialized
[ 14.144173] Bluetooth: L2CAP socket layer initialized
[ 14.144183] Bluetooth: SCO socket layer initialized
[ 14.151209] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c81)
[ 14.158567] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 14.158570] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized!
[ 14.158572] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 14.158573] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 14.158629] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input21
[ 14.158690] usbcore: registered new interface driver uvcvideo
[ 14.158691] USB Video Class driver (1.1.1)
[ 14.194049] intel_rapl: Found RAPL domain package
[ 14.194061] intel_rapl: Found RAPL domain core
[ 14.194063] intel_rapl: Found RAPL domain uncore
[ 14.194065] intel_rapl: Found RAPL domain dram
[ 14.194070] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 14.194078] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 14.296241] usbcore: registered new interface driver btusb
[ 14.360876] usbcore: registered new interface driver ath3k
[ 14.442453] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 21.099574] r8169 0000:02:00.0 enp2s0: link down
[ 21.099660] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 21.116629] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 26.806353] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 26.809506] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 26.849007] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 27.703980] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 28.700889] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 29.742512] wlp3s0: authenticate with 06:27:22:0b:44:4f
[ 29.770727] wlp3s0: send auth to 06:27:22:0b:44:4f (try 1/3)
[ 29.782257] wlp3s0: authenticated
[ 29.783407] wlp3s0: associate with 06:27:22:0b:44:4f (try 1/3)
[ 29.794549] wlp3s0: RX AssocResp from 06:27:22:0b:44:4f (capab=0x431 status=0 aid=4)
[ 29.794566] wlp3s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
[ 29.794567] wlp3s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
[ 29.794757] wlp3s0: associated
[ 29.968585] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 39.101846] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.101849] Bluetooth: BNEP filters: protocol multicast
[ 39.101854] Bluetooth: BNEP socket layer initialized
[ 113.725604] fuse init (API version 7.26)
[ 127.149719] rfkill: input handler disabledCreated a ath9k.conf with this content and it didn't work also
cat /etc/modprobe.d/ath9k.conf
options ath9k nohwcrypt=1 blink=1 btcoex_enable=1 bt_ant_diversity=1Was thinking, maybe this ath3k should be ath9k?
bluetooth 626688 12 btrtl,btintel,bnep,btbcm,ath3k,btusbEdit:
Tried this https://bbs.archlinux.org/viewtopic.php?id=184233
Changing gunzip to xz and it didn't work too.
Now I have bluez-firmware and still doesn't work.
I give up.
Last edited by pdrocaldeira (2018-01-26 18:33:14)
Offline
Pages: 1