You are not logged in.

Pages: 1

#1 2018-02-07 08:43:46

frojin
Member
Registered: 2018-02-06
Posts: 2

[SOLVED]startx black screen [optimus laptop]

Hi, startx gives a black screen, I can still use commands on it without seeing although I only tried exit
I have been trying to install xorg for 2 weeks, I tried alot of different solutions, nothing works
I also tried to just install gnome at one point  before even startx worked but nothing works yet.I also tried installing bumblebee but gave up early.
I install nvidia and generated the xorg.conf file with xconfig.
I don't know what I am doing to be honest, I don't really know what's relevant, so I am going to try to post as much as possible.

it's a laptop with hybrid graphics.

so here's the output of a few commands:

lspci -k | grep -E 'VGA|3D'

00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev a1)
01:00.0 VGA compatible controller: NVIDIA corporation GP107M [GeForce GTX 1050 Mobile] (rev a1)

xrandr

 Can't open display

xrandr -d :0

Can't open display :0

here're some files I think are relevant

~/.xinitrc

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login

xrandr --setprovideroutputsoruce modesetting NVIDIA-0
xrandr --auto
xrandr --dpi 96

/etc/X11/xinit/xinitrc     which is basically the same thing

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login

xrandr --setprovideroutputsoruce modesetting NVIDIA-0
xrandr --auto
exec gnome-session
[/code⁣]

/etc/X11/xorg.conf
[code⁣]
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 390.25  (buildmeister@swio-display-x86-rhel47-03)  Wed Jan 24 20:46:04 PST 2018

Section "ServerLayout"
    Identifier     "layout"
    Screen 0       "nvidia"
    Inactive	   "intel"
EndSection

Section "Module"
    Load           "modesetting"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Device"
    Identifier     "nvidia"
    Driver         "nvidia"
    BusID	   "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "nvidia"
    Device         "nvidia"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

Section "Device"
	Identifier "intel"
	Driver "modesetting"
EndSection

Section "Screen"
	Identifier "intel"
	Device "intel"
EndSection

/etc/X11/xinit/xserverrc

#!/bin/sh
exec /usr/bin/X -nolisten tcp "$@" vt$XDG_VTNR

/home/*/.local/share/xorg/Xorg.0.log

[    65.450] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    65.451] X Protocol Version 11, Revision 0
[    65.452] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[    65.452] Current Operating System: Linux reftin 4.15.1-2-ARCH #1 SMP Sun Feb 4 22:27:45 UTC 2018 x86_64
[    65.452] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e6c31349-20a2-4fd4-a12a-2dbff4babb22 rw quiet
[    65.454] Build Date: 26 January 2018  10:25:18AM
[    65.454]  
[    65.455] Current version of pixman: 0.34.0
[    65.456] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    65.456] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    65.458] (==) Log file: "/home/sinistra/.local/share/xorg/Xorg.0.log", Time: Wed Feb  7 07:57:54 2018
[    65.459] (==) Using config file: "/etc/X11/xorg.conf"
[    65.460] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    65.460] (==) ServerLayout "layout"
[    65.460] (**) |-->Screen "nvidia" (0)
[    65.460] (**) |   |-->Monitor "<default monitor>"
[    65.460] (**) |   |-->Device "nvidia"
[    65.460] (**) |   |-->GPUDevice "intel"
[    65.460] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[    65.460] (**) |-->Inactive Device "intel"
[    65.460] (==) Automatically adding devices
[    65.460] (==) Automatically enabling devices
[    65.460] (==) Automatically adding GPU devices
[    65.460] (==) Automatically binding GPU devices
[    65.460] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    65.460] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    65.460] 	Entry deleted from font path.
[    65.460] (==) FontPath set to:
	
[    65.460] (==) ModulePath set to "/usr/lib/xorg/modules"
[    65.460] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    65.460] (II) Loader magic: 0x55a686830d60
[    65.460] (II) Module ABI versions:
[    65.460] 	X.Org ANSI C Emulation: 0.4
[    65.460] 	X.Org Video Driver: 23.0
[    65.460] 	X.Org XInput driver : 24.1
[    65.460] 	X.Org Server Extension : 10.0
[    65.461] (++) using VT number 1

[    65.461] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    65.462] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    65.463] (II) xfree86: Adding drm device (/dev/dri/card0)
[    65.463] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    65.465] (--) PCI:*(0:0:2:0) 8086:591b:103c:836b rev 4, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    65.465] (--) PCI: (0:1:0:0) 10de:1c8d:103c:836b rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    65.465] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    65.465] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    65.465] (II) LoadModule: "modesetting"
[    65.465] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    65.465] (II) Module modesetting: vendor="X.Org Foundation"
[    65.465] 	compiled for 1.19.6, module version = 1.19.6
[    65.465] 	Module class: X.Org Video Driver
[    65.465] 	ABI class: X.Org Video Driver, version 23.0
[    65.465] (II) LoadModule: "glx"
[    65.465] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    65.465] (II) Module glx: vendor="X.Org Foundation"
[    65.465] 	compiled for 1.19.6, module version = 1.0.0
[    65.465] 	ABI class: X.Org Server Extension, version 10.0
[    65.465] (II) LoadModule: "nvidia"
[    65.465] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    65.466] (II) Module nvidia: vendor="NVIDIA Corporation"
[    65.466] 	compiled for 4.0.2, module version = 1.0.0
[    65.466] 	Module class: X.Org Video Driver
[    65.466] (II) LoadModule: "modesetting"
[    65.466] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    65.466] (II) Module modesetting: vendor="X.Org Foundation"
[    65.466] 	compiled for 1.19.6, module version = 1.19.6
[    65.466] 	Module class: X.Org Video Driver
[    65.466] 	ABI class: X.Org Video Driver, version 23.0
[    65.466] (II) UnloadModule: "modesetting"
[    65.466] (II) Unloading modesetting
[    65.466] (II) Failed to load module "modesetting" (already loaded, 21926)
[    65.466] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    65.466] (II) NVIDIA dlloader X Driver  390.25  Wed Jan 24 18:57:05 PST 2018
[    65.466] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    65.466] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    65.466] (II) modeset(G0): using drv /dev/dri/card0
[    65.466] (II) Loading sub module "fb"
[    65.466] (II) LoadModule: "fb"
[    65.466] (II) Loading /usr/lib/xorg/modules/libfb.so
[    65.466] (II) Module fb: vendor="X.Org Foundation"
[    65.466] 	compiled for 1.19.6, module version = 1.0.0
[    65.466] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.466] (II) Loading sub module "wfb"
[    65.466] (II) LoadModule: "wfb"
[    65.466] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    65.466] (II) Module wfb: vendor="X.Org Foundation"
[    65.466] 	compiled for 1.19.6, module version = 1.0.0
[    65.466] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.466] (II) Loading sub module "ramdac"
[    65.466] (II) LoadModule: "ramdac"
[    65.466] (II) Module "ramdac" already built-in
[    65.466] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    65.466] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    65.466] (==) NVIDIA(0): RGB weight 888
[    65.466] (==) NVIDIA(0): Default visual is TrueColor
[    65.466] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    65.466] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    65.466] (**) NVIDIA(0): Enabling 2D acceleration
[    65.467] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    65.467] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    65.467] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    65.467] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    65.467] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    65.680] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    65.680] (--) NVIDIA(0):     DFP-0
[    65.681] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[    65.681] (--) NVIDIA(0): Memory: 4194304 kBytes
[    65.681] (--) NVIDIA(0): VideoBIOS: 86.07.3c.00.7b
[    65.681] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    65.681] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    65.681] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    65.681] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    65.681] (--) NVIDIA(GPU-0): 
[    65.681] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[    65.681] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[    65.681] (II) NVIDIA(0): Validated MetaModes:
[    65.681] (II) NVIDIA(0):     "NULL"
[    65.681] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    65.681] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    65.681] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    65.681] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[    65.681] (==) modeset(G0): RGB weight 888
[    65.681] (==) modeset(G0): Default visual is TrueColor
[    65.681] (II) Loading sub module "glamoregl"
[    65.681] (II) LoadModule: "glamoregl"
[    65.681] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    65.681] (II) Module glamoregl: vendor="X.Org Foundation"
[    65.681] 	compiled for 1.19.6, module version = 1.0.0
[    65.681] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.681] (II) glamor: OpenGL accelerated X.org driver based.
[    65.689] (II) glamor: EGL version 1.4 (DRI2):
[    65.691] (II) modeset(G0): glamor initialized
[    65.693] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    65.831] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    65.831] (II) modeset(G0): Output DP-1-1 has no monitor section
[    65.832] (II) modeset(G0): EDID for output eDP-1-1
[    65.832] (II) modeset(G0): Manufacturer: AUO  Model: 41ed  Serial#: 0
[    65.832] (II) modeset(G0): Year: 2015  Week: 0
[    65.832] (II) modeset(G0): EDID Version: 1.4
[    65.832] (II) modeset(G0): Digital Display Input
[    65.832] (II) modeset(G0): 6 bits per channel
[    65.832] (II) modeset(G0): Digital interface is DisplayPort
[    65.832] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    65.832] (II) modeset(G0): Gamma: 2.20
[    65.832] (II) modeset(G0): No DPMS capabilities specified
[    65.832] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    65.832] (II) modeset(G0): First detailed timing is preferred mode
[    65.832] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    65.832] (II) modeset(G0): redX: 0.582 redY: 0.346   greenX: 0.351 greenY: 0.576
[    65.832] (II) modeset(G0): blueX: 0.162 blueY: 0.145   whiteX: 0.327 whiteY: 0.354
[    65.832] (II) modeset(G0): Manufacturer's mask: 0
[    65.832] (II) modeset(G0): Supported detailed timing:
[    65.832] (II) modeset(G0): clock: 141.0 MHz   Image Size:  344 x 193 mm
[    65.832] (II) modeset(G0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0
[    65.833] (II) modeset(G0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1118 v_border: 0
[    65.833] (II) modeset(G0): Supported detailed timing:
[    65.833] (II) modeset(G0): clock: 94.0 MHz   Image Size:  344 x 193 mm
[    65.833] (II) modeset(G0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2100 h_border: 0
[    65.833] (II) modeset(G0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1118 v_border: 0
[    65.833] (II) modeset(G0): Unknown vendor-specific block 2
[    65.833] (II) modeset(G0): EDID (in hex):
[    65.833] (II) modeset(G0): 	00ffffffffffff0006afed4100000000
[    65.833] (II) modeset(G0): 	0019010495221378022e8e9558599329
[    65.833] (II) modeset(G0): 	25535a00000001010101010101010101
[    65.833] (II) modeset(G0): 	010101010101143780b4703826406c30
[    65.833] (II) modeset(G0): 	aa0058c110000018b82480b470382640
[    65.833] (II) modeset(G0): 	6c30aa0058c110000018000000000000
[    65.833] (II) modeset(G0): 	00000000000000000000000000000002
[    65.833] (II) modeset(G0): 	001048ff0f3c6e1e14216e2020200035
[    65.833] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    65.833] (II) modeset(G0): Modeline "1920x1080"x60.1  141.00  1920 2028 2076 2100  1080 1090 1100 1118 -hsync -vsync (67.1 kHz eP)
[    65.833] (II) modeset(G0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    65.833] (II) modeset(G0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    65.833] (II) modeset(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    65.833] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    65.833] (II) modeset(G0): Modeline "1920x1080"x40.0   94.00  1920 2028 2076 2100  1080 1090 1100 1118 -hsync -vsync (44.8 kHz e)
[    65.833] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    65.833] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    65.833] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    65.833] (II) modeset(G0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    65.833] (II) modeset(G0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    65.833] (II) modeset(G0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    65.833] (II) modeset(G0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    65.833] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    65.833] (II) modeset(G0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    65.833] (II) modeset(G0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    65.833] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    65.833] (II) modeset(G0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    65.833] (II) modeset(G0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    65.833] (II) modeset(G0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    65.833] (II) modeset(G0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    65.833] (II) modeset(G0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    65.833] (II) modeset(G0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    65.834] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    65.834] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    65.834] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    65.834] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    65.834] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    65.834] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    65.834] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    65.834] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    65.834] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    65.834] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    65.834] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    65.834] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    65.834] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    65.834] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    65.834] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    65.834] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    65.971] (II) modeset(G0): EDID for output HDMI-1-1
[    65.971] (II) modeset(G0): EDID for output DP-1-1
[    65.971] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    65.971] (==) modeset(G0): DPI set to (96, 96)
[    65.971] (II) Loading sub module "fb"
[    65.971] (II) LoadModule: "fb"
[    65.971] (II) Loading /usr/lib/xorg/modules/libfb.so
[    65.971] (II) Module fb: vendor="X.Org Foundation"
[    65.971] 	compiled for 1.19.6, module version = 1.0.0
[    65.971] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    65.971] (--) Depth 24 pixmap format is 32 bpp
[    66.033] (==) modeset(G0): Backing store enabled
[    66.033] (==) modeset(G0): Silken mouse enabled
[    66.033] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    66.086] (==) modeset(G0): DPMS enabled
[    66.086] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[    66.086] (II) modeset(G0): [DRI2] Setup complete
[    66.086] (II) modeset(G0): [DRI2]   DRI driver: i965
[    66.086] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[    66.086] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    66.086] (II) NVIDIA:     access.
[    66.099] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    66.099] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    66.099] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    66.099] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    66.099] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    66.099] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    66.099] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    66.099] (II) NVIDIA(0):     Config Options in the README.
[    66.117] (II) NVIDIA(0): Setting mode "NULL"
[    66.122] (==) NVIDIA(0): Disabling shared memory pixmaps
[    66.122] (==) NVIDIA(0): Backing store enabled
[    66.122] (==) NVIDIA(0): Silken mouse enabled
[    66.122] (==) NVIDIA(0): DPMS enabled
[    66.122] (II) Loading sub module "dri2"
[    66.122] (II) LoadModule: "dri2"
[    66.122] (II) Module "dri2" already built-in
[    66.122] (II) NVIDIA(0): [DRI2] Setup complete
[    66.122] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    66.122] (--) RandR disabled
[    66.124] (II) AIGLX: Screen 0 is not DRI2 capable
[    66.124] (EE) AIGLX: reverting to software rendering
[    66.166] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    66.167] (II) IGLX: Loaded and initialized swrast
[    66.167] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    66.444] (II) modeset(G0): Damage tracking initialized
[    66.489] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    66.489] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    66.489] (II) LoadModule: "libinput"
[    66.489] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    66.491] (II) Module libinput: vendor="X.Org Foundation"
[    66.491] 	compiled for 1.19.3, module version = 0.26.0
[    66.491] 	Module class: X.Org XInput Driver
[    66.491] 	ABI class: X.Org XInput driver, version 24.1
[    66.491] (II) Using input driver 'libinput' for 'Power Button'
[    66.491] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 32 paused 0
[    66.491] (**) Power Button: always reports core events
[    66.491] (**) Option "Device" "/dev/input/event2"
[    66.491] (**) Option "_source" "server/udev"
[    66.492] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    66.492] (II) event2  - (II) Power Button: (II) device is a keyboard
[    66.492] (II) event2  - (II) Power Button: (II) device removed
[    66.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    66.492] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    66.492] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    66.492] (II) event2  - (II) Power Button: (II) device is a keyboard
[    66.492] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    66.492] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    66.492] (II) Using input driver 'libinput' for 'Video Bus'
[    66.493] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 35 paused 0
[    66.493] (**) Video Bus: always reports core events
[    66.493] (**) Option "Device" "/dev/input/event9"
[    66.493] (**) Option "_source" "server/udev"
[    66.493] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    66.493] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    66.493] (II) event9  - (II) Video Bus: (II) device removed
[    66.493] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11/event9"
[    66.493] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    66.493] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    66.493] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    66.494] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    66.494] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    66.494] (II) Using input driver 'libinput' for 'Video Bus'
[    66.494] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 36 paused 0
[    66.494] (**) Video Bus: always reports core events
[    66.494] (**) Option "Device" "/dev/input/event8"
[    66.494] (**) Option "_source" "server/udev"
[    66.494] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    66.494] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    66.494] (II) event8  - (II) Video Bus: (II) device removed
[    66.494] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10/event8"
[    66.494] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    66.495] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    66.495] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    66.495] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    66.495] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    66.495] (II) Using input driver 'libinput' for 'Power Button'
[    66.495] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 37 paused 0
[    66.496] (**) Power Button: always reports core events
[    66.496] (**) Option "Device" "/dev/input/event1"
[    66.496] (**) Option "_source" "server/udev"
[    66.496] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    66.496] (II) event1  - (II) Power Button: (II) device is a keyboard
[    66.496] (II) event1  - (II) Power Button: (II) device removed
[    66.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    66.496] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    66.496] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    66.496] (II) event1  - (II) Power Button: (II) device is a keyboard
[    66.496] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    66.496] (II) No input driver specified, ignoring this device.
[    66.496] (II) This device may have been added with another device file.
[    66.497] (II) config/udev: Adding input device HP Wide Vision HD Camera: HP Wi (/dev/input/event7)
[    66.497] (**) HP Wide Vision HD Camera: HP Wi: Applying InputClass "libinput keyboard catchall"
[    66.497] (II) Using input driver 'libinput' for 'HP Wide Vision HD Camera: HP Wi'
[    66.497] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 38 paused 0
[    66.497] (**) HP Wide Vision HD Camera: HP Wi: always reports core events
[    66.497] (**) Option "Device" "/dev/input/event7"
[    66.497] (**) Option "_source" "server/udev"
[    66.497] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) is tagged by udev as: Keyboard
[    66.497] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) device is a keyboard
[    66.497] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) device removed
[    66.498] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9/event7"
[    66.498] (II) XINPUT: Adding extended input device "HP Wide Vision HD Camera: HP Wi" (type: KEYBOARD, id 10)
[    66.498] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) is tagged by udev as: Keyboard
[    66.498] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) device is a keyboard
[    66.498] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    66.498] (II) No input driver specified, ignoring this device.
[    66.498] (II) This device may have been added with another device file.
[    66.498] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    66.498] (II) No input driver specified, ignoring this device.
[    66.498] (II) This device may have been added with another device file.
[    66.498] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    66.498] (II) No input driver specified, ignoring this device.
[    66.498] (II) This device may have been added with another device file.
[    66.499] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    66.499] (II) No input driver specified, ignoring this device.
[    66.499] (II) This device may have been added with another device file.
[    66.499] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    66.499] (II) No input driver specified, ignoring this device.
[    66.499] (II) This device may have been added with another device file.
[    66.499] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[    66.499] (II) No input driver specified, ignoring this device.
[    66.499] (II) This device may have been added with another device file.
[    66.499] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[    66.499] (II) No input driver specified, ignoring this device.
[    66.499] (II) This device may have been added with another device file.
[    66.499] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    66.499] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    66.499] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    66.500] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[    66.500] (**) AT Translated Set 2 keyboard: always reports core events
[    66.500] (**) Option "Device" "/dev/input/event3"
[    66.500] (**) Option "_source" "server/udev"
[    66.500] (II) event3  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    66.500] (II) event3  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    66.500] (II) event3  - (II) AT Translated Set 2 keyboard: (II) device removed
[    66.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    66.500] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    66.500] (II) event3  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    66.500] (II) event3  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    66.501] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    66.501] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    66.501] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    66.501] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    66.501] (II) LoadModule: "synaptics"
[    66.501] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    66.501] (II) Module synaptics: vendor="X.Org Foundation"
[    66.501] 	compiled for 1.19.0, module version = 1.9.0
[    66.501] 	Module class: X.Org XInput Driver
[    66.501] 	ABI class: X.Org XInput driver, version 24.1
[    66.501] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    66.501] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 40 paused 0
[    66.501] (**) ETPS/2 Elantech Touchpad: always reports core events
[    66.501] (**) Option "Device" "/dev/input/event10"
[    66.501] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3520 (res 31)
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1784 (res 31)
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    66.501] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    66.501] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    66.501] (**) ETPS/2 Elantech Touchpad: always reports core events
[    66.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[    66.501] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[    66.501] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    66.501] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    66.501] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[    66.501] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    66.501] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    66.501] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    66.501] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    66.502] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    66.502] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    66.502] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    66.502] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    66.502] (II) No input driver specified, ignoring this device.
[    66.502] (II) This device may have been added with another device file.
[    66.502] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    66.502] (II) No input driver specified, ignoring this device.
[    66.502] (II) This device may have been added with another device file.
[    66.502] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[    66.502] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    66.502] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    66.503] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[    66.503] (**) HP Wireless hotkeys: always reports core events
[    66.503] (**) Option "Device" "/dev/input/event4"
[    66.503] (**) Option "_source" "server/udev"
[    66.503] (II) event4  - (II) HP Wireless hotkeys: (II) is tagged by udev as: Keyboard
[    66.503] (II) event4  - (II) HP Wireless hotkeys: (II) device is a keyboard
[    66.503] (II) event4  - (II) HP Wireless hotkeys: (II) device removed
[    66.503] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[    66.503] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[    66.503] (II) event4  - (II) HP Wireless hotkeys: (II) is tagged by udev as: Keyboard
[    66.503] (II) event4  - (II) HP Wireless hotkeys: (II) device is a keyboard
[    66.503] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    66.503] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    66.503] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    66.504] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 42 paused 0
[    66.504] (**) HP WMI hotkeys: always reports core events
[    66.504] (**) Option "Device" "/dev/input/event6"
[    66.504] (**) Option "_source" "server/udev"
[    66.504] (II) event6  - (II) HP WMI hotkeys: (II) is tagged by udev as: Keyboard Switch
[    66.504] (II) event6  - (II) HP WMI hotkeys: (II) device is a keyboard
[    66.504] (II) event6  - (II) HP WMI hotkeys: (II) device removed
[    66.504] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[    66.504] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    66.504] (II) event6  - (II) HP WMI hotkeys: (II) is tagged by udev as: Keyboard Switch
[    66.504] (II) event6  - (II) HP WMI hotkeys: (II) device is a keyboard
[    66.518] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    66.518] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    66.518] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    66.518] (--) NVIDIA(GPU-0): 
[    71.320] (**) Option "fd" "32"
[    71.320] (II) event2  - (II) Power Button: (II) device removed
[    71.320] (**) Option "fd" "35"
[    71.320] (II) event9  - (II) Video Bus: (II) device removed
[    71.320] (**) Option "fd" "36"
[    71.320] (II) event8  - (II) Video Bus: (II) device removed
[    71.320] (**) Option "fd" "37"
[    71.320] (II) event1  - (II) Power Button: (II) device removed
[    71.320] (**) Option "fd" "38"
[    71.320] (II) event7  - (II) HP Wide Vision HD Camera: HP Wi: (II) device removed
[    71.320] (**) Option "fd" "39"
[    71.321] (II) event3  - (II) AT Translated Set 2 keyboard: (II) device removed
[    71.321] (**) Option "fd" "41"
[    71.321] (II) event4  - (II) HP Wireless hotkeys: (II) device removed
[    71.321] (**) Option "fd" "42"
[    71.321] (II) event6  - (II) HP WMI hotkeys: (II) device removed
[    71.322] (II) UnloadModule: "libinput"
[    71.322] (II) systemd-logind: releasing fd for 13:70
[    71.346] (II) UnloadModule: "libinput"
[    71.346] (II) systemd-logind: releasing fd for 13:68
[    71.386] (II) UnloadModule: "synaptics"
[    71.386] (II) systemd-logind: releasing fd for 13:74
[    71.414] (II) UnloadModule: "libinput"
[    71.414] (II) systemd-logind: releasing fd for 13:67
[    71.430] (II) UnloadModule: "libinput"
[    71.430] (II) systemd-logind: releasing fd for 13:71
[    71.455] (II) UnloadModule: "libinput"
[    71.455] (II) systemd-logind: releasing fd for 13:65
[    71.470] (II) UnloadModule: "libinput"
[    71.470] (II) systemd-logind: releasing fd for 13:72
[    71.498] (II) UnloadModule: "libinput"
[    71.498] (II) systemd-logind: releasing fd for 13:73
[    71.526] (II) UnloadModule: "libinput"
[    71.526] (II) systemd-logind: releasing fd for 13:66
[    71.585] (WW) NVIDIA(0): Free swap group failed.
[    71.821] (II) NVIDIA(GPU-0): Deleting GPU-0
[    72.050] (II) Server terminated successfully (0). Closing log file.

also, startx gives a bunch of warnings in this manner:
twm: warning: font for charset ** is lacking

Last edited by frojin (2018-02-07 09:08:10)

Offline

#2 2018-02-07 08:51:11

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]startx black screen [optimus laptop]

Remove whatever config file you generated. The issue with your xinitrc is that you added the offloading xrandr calls after an exec call. An exec call replaces the shell that is parsing the script with the program being executed. Which means that in practice these lines will never be reached. put them before the twm.

Last edited by V1del (2018-02-07 08:54:24)

Offline

#3 2018-02-07 08:58:38

frojin
Member
Registered: 2018-02-06
Posts: 2

Re: [SOLVED]startx black screen [optimus laptop]

THANKS for the quick reply, it's working great now.

Offline

#4 2018-02-07 09:01:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]startx black screen [optimus laptop]

Glad to hear, please mark as [SOLVED] by editing the title of your initial post.

Offline

Pages: 1

Board footer

Powered by FluxBB