You are not logged in.

#1 2018-01-12 23:07:05

heshakomeu
Member
Registered: 2017-09-14
Posts: 16

Struggling to connect to wifi with NetworkManager

I reinstalled Arch today with the i3-gaps window manager on a Thinkpad x230 with an Intel Centrino Advanced-N 6205 wifi card. I moved to NetworkManager from netctl/dhcpcd so I could use a polybar NetworkManager applet. However, I cannot for the life of me connect to my wifi (which I'll call HOME24). At first, it was because I hadn't disabled netctl (I was seeing "The interface is already up" errors when I ran journalctl -xe), so I disabled netctl and dhcpcd. I still cannot connect, however. I can see my network through sudo nmcli dev wifi list and by clicking on the applet. If I try to connect with nmcli dev wifi connect HOME24 password [HOME24's password], I get:

Error: Connection activation failed: (53) The Wi-Fi network could not be found.

I also ran through this post and tried making a new profile and connecting to it, using HOME24-wifi as the new profile name: https://forums.kali.org/showthread.php? … (error-53) I got the same "Connection activation failed" error when I tried to connect to the new profile.

I've read through Arch Wiki's NetworkManager page and tried "To reconnect an interface marked as disconnected:"

$ nmcli con up uuid 28cb5175-cafa-457d-884f-cf22ec2a0b0e
Passwords or encryption keys are required to access the wireless network 'HOME24'.
Warning: password for '802-11-wireless-security.psk' not given in 'passwd-file' and nmcli cannot ask without '--ask' option.
$ nmcli con up uuid 28cb5175-cafa-457d-884f-cf22ec2a0b0e --ask
Passwords or encryption keys are required to access the wireless network 'HOME24'.
Password (802-11-wireless-security.psk): 
Error: Connection activation failed: The Wi-Fi network could not be found

At this point, I just don't know what else to do. Any help would be appreciated! Thanks!

Last edited by heshakomeu (2018-01-12 23:08:14)

Offline

#2 2018-01-12 23:16:21

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: Struggling to connect to wifi with NetworkManager

What's the output of...

systemctl list-unit-files --state=enabled

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2018-01-12 23:22:48

heshakomeu
Member
Registered: 2017-09-14
Posts: 16

Re: Struggling to connect to wifi with NetworkManager

slithery wrote:

What's the output of...

systemctl list-unit-files --state=enabled
UNIT FILE                                   STATE  
autovt@.service                             enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service  enabled
getty@.service                              enabled
NetworkManager-dispatcher.service           enabled
NetworkManager.service                      enabled
remote-fs.target                            enabled

Last edited by heshakomeu (2018-01-12 23:23:44)

Offline

#4 2018-01-17 09:10:54

robg
Member
Registered: 2015-03-05
Posts: 218

Re: Struggling to connect to wifi with NetworkManager

To reiterate:

1. Using netctl, you are able to connect to your WiFi access point.
2. You made sure that NetworkManager is the only internet-related service running.
3. Connecting using nmli throws you a `The Wi-Fi network could not be found.` error.

Please do the following: Delete the connection and then, after a fresh attempt at connecting, post the output of `dmesg` and `journalctl -xe`. Also, what are the details of your access point, i.e., what encryption (WPE? WPA? ...), is it a hidden network, e.t.c.?

Offline

#5 2018-02-14 18:32:41

woodani
Member
Registered: 2018-02-14
Posts: 1

Re: Struggling to connect to wifi with NetworkManager

Not the OP but I'm having the same issue.

The output of "dmesg" for me was :

 [    0.000000] Linux version 4.15.2-2-ARCH (builduser@heftig-7084) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Thu Feb 8 18:54:52 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f7df6b5-6bec-40b2-b356-a1d28c29b811 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf77ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf780000-0x00000000cf78dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cf78e000-0x00000000cf7cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf7d0000-0x00000000cf7dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf7ed000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000022bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pro 3130 Microtower PC/2A9C, BIOS 6.16 03/18/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 25C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask E00000000 write-back
[    0.000000]   2 base 200000000 mask FC0000000 write-back
[    0.000000]   3 base 240000000 mask FE0000000 write-back
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 base 1FC000000 mask FFC000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8832M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] BRK [0x75637000, 0x75637fff] PGTABLE
[    0.000000] BRK [0x75638000, 0x75638fff] PGTABLE
[    0.000000] BRK [0x75639000, 0x75639fff] PGTABLE
[    0.000000] BRK [0x7563a000, 0x7563afff] PGTABLE
[    0.000000] BRK [0x7563b000, 0x7563bfff] PGTABLE
[    0.000000] BRK [0x7563c000, 0x7563cfff] PGTABLE
[    0.000000] BRK [0x7563d000, 0x7563dfff] PGTABLE
[    0.000000] BRK [0x7563e000, 0x7563efff] PGTABLE
[    0.000000] BRK [0x7563f000, 0x7563ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36765000-0x373a9fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9F10 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000CF780100 00006C (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CF780290 0000F4 (v04 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603)
[    0.000000] ACPI: DSDT 0x00000000CF7805E0 005AB5 (v02 HPQOEM SLIC-CPC 00000007 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CF78E000 000040
[    0.000000] ACPI: FACS 0x00000000CF78E000 000040
[    0.000000] ACPI: APIC 0x00000000CF780390 00008C (v02 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CF780420 00003C (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000CF780460 000176 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CF78E040 000072 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CF78A680 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
[    0.000000] ACPI: HPET 0x00000000CF78AED0 000038 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x00000000CF78E0C0 002024 (v01 HPQOEM SLIC-CPC 20110318 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CF791B40 000363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22bff8000-0x22bffafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022bffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cf77ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001fbffffff]
[    0.000000]   node   0: [mem 0x0000000200000000-0x000000022bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022bffffff]
[    0.000000] On node 0 totalpages: 2062109
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13214 pages used for memmap
[    0.000000]   DMA32 zone: 845696 pages, LIFO batch:31
[    0.000000]   Normal zone: 19200 pages used for memmap
[    0.000000]   Normal zone: 1212416 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf780000-0xcf78dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf78e000-0xcf7cffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7d0000-0xcf7dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7e0000-0xcf7ecfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7ed000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2029610
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f7df6b5-6bec-40b2-b356-a1d28c29b811 rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8014444K/8248436K available (10252K kernel code, 1241K rwdata, 3220K rodata, 1432K init, 636K bss, 233992K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31397 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 3325.519 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6651.03 BogoMIPS (lpj=3325519)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.007755] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008626] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008677] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008703] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008937] CPU: Physical Processor ID: 0
[    0.008938] CPU: Processor Core ID: 0
[    0.008948] mce: CPU supports 9 MCE banks
[    0.008955] CPU0: Thermal monitoring enabled (TM1)
[    0.008964] process: using mwait in idle threads
[    0.008967] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.008967] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.008969] Spectre V2 : Mitigation: Full generic retpoline
[    0.009085] Freeing SMP alternatives memory: 24K
[    0.011000] smpboot: CPU0: Intel(R) Core(TM) i3 CPU         560  @ 3.33GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.014009] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.014027] core: CPUID marked event: 'bus cycles' unavailable
[    0.014032] ... version:                3
[    0.014032] ... bit width:              48
[    0.014033] ... generic registers:      4
[    0.014034] ... value mask:             0000ffffffffffff
[    0.014034] ... max period:             000000007fffffff
[    0.014035] ... fixed-purpose events:   3
[    0.014036] ... event mask:             000000070000000f
[    0.016003] Hierarchical SRCU implementation.
[    0.022213] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.024003] smp: Bringing up secondary CPUs ...
[    0.033018] x86: Booting SMP configuration:
[    0.033019] .... node  #0, CPUs:      #1 #2 #3
[    0.054040] smp: Brought up 1 node, 4 CPUs
[    0.054040] smpboot: Max logical packages: 2
[    0.054040] smpboot: Total of 4 processors activated (26604.15 BogoMIPS)
[    0.056003] devtmpfs: initialized
[    0.056057] x86/mm: Memory block size: 128MB
[    0.056666] PM: Registering ACPI NVS region [mem 0xcf78e000-0xcf7cffff] (270336 bytes)
[    0.056666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.056666] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.056666] pinctrl core: initialized pinctrl subsystem
[    0.056666] RTC time: 14:35:19, date: 02/12/18
[    0.057058] NET: Registered protocol family 16
[    0.057194] cpuidle: using governor ladder
[    0.057194] cpuidle: using governor menu
[    0.057194] ACPI: bus type PCI registered
[    0.057194] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.057194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.057194] PCI: not using MMCONFIG
[    0.057194] PCI: Using configuration type 1 for base access
[    0.058123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.058124] ACPI: Added _OSI(Module Device)
[    0.058124] ACPI: Added _OSI(Processor Device)
[    0.058124] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.058124] ACPI: Added _OSI(Processor Aggregator Device)
[    0.058255] ACPI: Executed 1 blocks of module-level executable AML code
[    0.062543] ACPI: Dynamic OEM Table Load:
[    0.062551] ACPI: SSDT 0xFFFF8F56E1E4C000 001550 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[    0.063187] ACPI: Dynamic OEM Table Load:
[    0.063191] ACPI: SSDT 0xFFFF8F56E1D49000 0004F4 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
[    0.063703] ACPI: Interpreter enabled
[    0.063722] ACPI: (supports S0 S1 S3 S4 S5)
[    0.063723] ACPI: Using IOAPIC for interrupt routing
[    0.063754] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.064467] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.064485] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.064669] ACPI: GPE 0x1B active on init
[    0.064678] ACPI: GPE 0x1E active on init
[    0.064688] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.072230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.072235] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.072241] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.072559] PCI host bridge to bus 0000:00
[    0.072561] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.072562] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.072564] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.072565] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.072566] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[    0.072567] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.072569] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.072576] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[    0.072595] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.072675] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[    0.072705] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.072805] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.072834] pci 0000:00:16.0: reg 0x10: [mem 0xf7fffc00-0xf7fffc0f 64bit]
[    0.072921] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.073009] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.073028] pci 0000:00:1a.0: reg 0x10: [mem 0xf7ffc000-0xf7ffc3ff]
[    0.073100] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.073183] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.073201] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[    0.073260] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.073340] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.073399] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.073483] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.073542] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.073632] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.073651] pci 0000:00:1d.0: reg 0x10: [mem 0xf7ff6000-0xf7ff63ff]
[    0.073721] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.073803] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.073915] pci 0000:00:1f.0: [8086:3b08] type 00 class 0x060100
[    0.074089] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[    0.074104] pci 0000:00:1f.2: reg 0x10: [io  0xbc00-0xbc07]
[    0.074109] pci 0000:00:1f.2: reg 0x14: [io  0xb880-0xb883]
[    0.074115] pci 0000:00:1f.2: reg 0x18: [io  0xb800-0xb807]
[    0.074121] pci 0000:00:1f.2: reg 0x1c: [io  0xb480-0xb483]
[    0.074127] pci 0000:00:1f.2: reg 0x20: [io  0xb400-0xb41f]
[    0.074133] pci 0000:00:1f.2: reg 0x24: [mem 0xf7ff4000-0xf7ff47ff]
[    0.074166] pci 0000:00:1f.2: PME# supported from D3hot
[    0.074243] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.074257] pci 0000:00:1f.3: reg 0x10: [mem 0xf7fff800-0xf7fff8ff 64bit]
[    0.074274] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.074387] pci 0000:01:00.0: [10de:0613] type 00 class 0x030000
[    0.074409] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.074421] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.074432] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.074440] pci 0000:01:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.074448] pci 0000:01:00.0: reg 0x30: [mem 0xfbde0000-0xfbdfffff pref]
[    0.074455] pci 0000:01:00.0: enabling Extended Tags
[    0.074557] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.074559] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.074561] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbdfffff]
[    0.074563] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.074618] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.074644] pci 0000:02:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.074668] pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[    0.074683] pci 0000:02:00.0: reg 0x20: [mem 0xf6ffc000-0xf6ffffff 64bit pref]
[    0.074693] pci 0000:02:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[    0.074766] pci 0000:02:00.0: supports D1 D2
[    0.074767] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078029] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.078035] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.078040] pci 0000:00:1c.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.078048] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.078125] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010
[    0.078155] pci 0000:03:00.0: reg 0x10: [mem 0xfbfff800-0xfbffffff 64bit]
[    0.078165] pci 0000:03:00.0: reg 0x18: [io  0xe800-0xe8ff]
[    0.078259] pci 0000:03:00.0: supports D2
[    0.078260] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[    0.081026] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.081033] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.081038] pci 0000:00:1c.2:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.081131] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.081138] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.081139] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.081140] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.081141] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.081143] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[    0.081144] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.081553] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.081616] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.081675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.081736] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.081800] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.081862] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.081924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.081985] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.082116] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.082116] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.082116] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.082116] vgaarb: loaded
[    0.082137] EDAC MC: Ver: 3.0.0
[    0.082191] PCI: Using ACPI for IRQ routing
[    0.087432] PCI: Discovered peer bus ff
[    0.087433] PCI: root bus ff: using default resources
[    0.087433] PCI: Probing PCI hardware (bus ff)
[    0.087452] PCI host bridge to bus 0000:ff
[    0.087453] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.087455] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.087456] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.087458] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.087462] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[    0.087496] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.087529] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.087560] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.087593] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.087624] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.087661] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.087663] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.087666] PCI: pci_cache_line_size set to 64 bytes
[    0.087701] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.087702] e820: reserve RAM buffer [mem 0xcf780000-0xcfffffff]
[    0.088003] NetLabel: Initializing
[    0.088003] NetLabel:  domain hash size = 128
[    0.088003] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.088003] NetLabel:  unlabeled traffic allowed by default
[    0.088025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.088030] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.090016] clocksource: Switched to clocksource hpet
[    0.100286] VFS: Disk quotas dquot_6.6.0
[    0.100304] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.100380] pnp: PnP ACPI init
[    0.100482] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.100484] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.100485] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.100487] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.100493] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.100569] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.100708] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.100712] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100877] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.100879] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.100880] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.100882] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.100884] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.100885] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.100889] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101050] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.101052] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.101055] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101118] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.101122] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101351] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.101353] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.101354] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.101356] system 00:06: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.101357] system 00:06: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.101361] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.101504] pnp: PnP ACPI: found 7 devices
[    0.107514] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.107535] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.107549] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.107551] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107553] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.107555] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbdfffff]
[    0.107557] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107560] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.107561] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.107565] pci 0000:00:1c.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.107567] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.107571] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.107573] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.107576] pci 0000:00:1c.2:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.107579] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.107583] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.107592] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.107593] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.107594] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107596] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.107597] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.107598] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.107599] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.107601] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbdfffff]
[    0.107602] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.107603] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.107604] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.107605] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.107607] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.107608] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.107609] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.107610] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.107612] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.107613] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107614] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.107615] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff window]
[    0.107617] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.107675] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.107676] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.107703] NET: Registered protocol family 2
[    0.107863] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.107987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.108167] TCP: Hash tables configured (established 65536 bind 65536)
[    0.108216] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.108243] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.108305] NET: Registered protocol family 1
[    0.108702] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.108717] PCI: CLS 32 bytes, default 64
[    0.108754] Unpacking initramfs...
[    0.275604] Freeing initrd memory: 12564K
[    0.275609] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.275612] software IO TLB [mem 0xcb780000-0xcf780000] (64MB) mapped at [00000000c42cba16-00000000a927a86f]
[    0.275770] Scanning for low memory corruption every 60 seconds
[    0.275838] simple-framebuffer simple-framebuffer.0: framebuffer at 0xf9000000, 0x12c000 bytes, mapped to 0x00000000f60de243
[    0.275840] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    0.276567] Console: switching to colour frame buffer device 80x30
[    0.277190] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.277655] Initialise system trusted keyrings
[    0.277665] Key type blacklist registered
[    0.277725] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    0.278582] zbud: loaded
[    0.280262] Key type asymmetric registered
[    0.280264] Asymmetric key parser 'x509' registered
[    0.280293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.280337] io scheduler noop registered
[    0.280339] io scheduler deadline registered
[    0.280375] io scheduler cfq registered (default)
[    0.280376] io scheduler mq-deadline registered
[    0.280377] io scheduler kyber registered
[    0.280398] io scheduler bfq registered
[    0.280979] intel_idle: MWAIT substates: 0x1120
[    0.280981] intel_idle: v0.4.1 model 0x25
[    0.281117] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.281175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.281185] ACPI: Power Button [PWRB]
[    0.281220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.281245] ACPI: Power Button [PWRF]
[    0.281562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.282455] ledtrig-cpu: registered to indicate activity on CPUs
[    0.282639] NET: Registered protocol family 10
[    0.286635] Segment Routing with IPv6
[    0.286675] NET: Registered protocol family 17
[    0.287130] RAS: Correctable Errors collector initialized.
[    0.287166] microcode: sig=0x20655, pf=0x2, revision=0x2
[    0.287240] microcode: Microcode Update Driver: v2.2.
[    0.287259] sched_clock: Marking stable (287223822, 0)->(397274155, -110050333)
[    0.287536] registered taskstats version 1
[    0.287548] Loading compiled-in X.509 certificates
[    0.287562] zswap: loaded using pool lzo/zbud
[    0.289949] Key type big_key registered
[    0.290151]   Magic number: 6:390:586
[    0.290231] hctosys: unable to open rtc device (rtc0)
[    0.292102] Freeing unused kernel memory: 1432K
[    0.292104] Write protecting the kernel read-only data: 16384k
[    0.292675] Freeing unused kernel memory: 2016K
[    0.294534] Freeing unused kernel memory: 876K
[    0.363402] ACPI: bus type USB registered
[    0.363427] usbcore: registered new interface driver usbfs
[    0.363439] usbcore: registered new interface driver hub
[    0.363464] usbcore: registered new device driver usb
[    0.365564] SCSI subsystem initialized
[    0.365712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.365964] ehci-pci: EHCI PCI platform driver
[    0.366208] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.366216] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.366228] ehci-pci 0000:00:1a.0: debug port 2
[    0.370146] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.370165] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[    0.373804] libata version 3.00 loaded.
[    0.377031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.377096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.377098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.377099] usb usb1: Product: EHCI Host Controller
[    0.377101] usb usb1: Manufacturer: Linux 4.15.2-2-ARCH ehci_hcd
[    0.377102] usb usb1: SerialNumber: 0000:00:1a.0
[    0.377258] hub 1-0:1.0: USB hub found
[    0.377265] hub 1-0:1.0: 2 ports detected
[    0.377603] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.377612] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.377624] ehci-pci 0000:00:1d.0: debug port 2
[    0.381529] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.381544] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[    0.388012] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.388057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.388059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.388060] usb usb2: Product: EHCI Host Controller
[    0.388061] usb usb2: Manufacturer: Linux 4.15.2-2-ARCH ehci_hcd
[    0.388062] usb usb2: SerialNumber: 0000:00:1d.0
[    0.388164] hub 2-0:1.0: USB hub found
[    0.388170] hub 2-0:1.0: 2 ports detected
[    0.388302] ahci 0000:00:1f.2: version 3.0
[    0.388476] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.398577] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.398579] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.413679] scsi host0: ahci
[    0.413897] scsi host1: ahci
[    0.414090] scsi host2: ahci
[    0.414202] scsi host3: ahci
[    0.414309] scsi host4: ahci
[    0.414404] scsi host5: ahci
[    0.414443] ata1: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4100 irq 24
[    0.414445] ata2: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4180 irq 24
[    0.414446] ata3: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4200 irq 24
[    0.414447] ata4: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4280 irq 24
[    0.414449] ata5: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4300 irq 24
[    0.414450] ata6: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4380 irq 24
[    0.428037] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[    0.696984] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.713054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.724309] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.725834] ata1.00: ATA-8: WDC WD5000AAKX-603CA0, 18.01H18, max UDMA/100
[    0.725838] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.727437] ata1.00: configured for UDMA/100
[    0.727652] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5
[    0.825736] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    0.825741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.826284] hub 1-1:1.0: USB hub found
[    0.826551] hub 1-1:1.0: 6 ports detected
[    0.841610] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    0.841615] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.842139] hub 2-1:1.0: USB hub found
[    0.842319] hub 2-1:1.0: 8 ports detected
[    0.935260] firewire_core 0000:03:00.0: created device fw0: GUID 0060b00000861d8f, S400
[    1.037241] ata2: SATA link down (SStatus 0 SControl 300)
[    1.103031] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.119014] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.182263] usb 1-1.4: New USB device found, idVendor=2357, idProduct=0107
[    1.182268] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.182271] usb 1-1.4: Product: 802.11n NIC 
[    1.182274] usb 1-1.4: Manufacturer: Realtek 
[    1.182277] usb 1-1.4: SerialNumber: 00e04c000001
[    1.213708] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0181
[    1.213712] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.213715] usb 2-1.1: Product: USB2.0-CRW
[    1.213717] usb 2-1.1: Manufacturer: Generic
[    1.213720] usb 2-1.1: SerialNumber: 20060413092100000
[    1.221404] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    1.221525] scsi host6: usb-storage 2-1.1:1.0
[    1.221595] usbcore: registered new interface driver usb-storage
[    1.222115] usbcore: registered new interface driver uas
[    1.247002] usb 1-1.5: new low-speed USB device number 4 using ehci-pci
[    1.311000] tsc: Refined TSC clocksource calibration: 3325.192 MHz
[    1.311012] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fee4261005, max_idle_ns: 440795322397 ns
[    1.332445] usb 1-1.5: New USB device found, idVendor=413c, idProduct=2003
[    1.332450] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.332453] usb 1-1.5: Product: Dell USB Keyboard
[    1.332456] usb 1-1.5: Manufacturer: Dell
[    1.334711] hidraw: raw HID events driver (C) Jiri Kosina
[    1.338888] usbcore: registered new interface driver usbhid
[    1.338889] usbhid: USB HID core driver
[    1.339674] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:413C:2003.0001/input/input2
[    1.348227] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.352277] ata3.00: ATAPI: hp      DVD-RAM GH60L, RD05, max UDMA/100
[    1.357414] ata3.00: configured for UDMA/100
[    1.362973] scsi 2:0:0:0: CD-ROM            hp       DVD-RAM GH60L    RD05 PQ: 0 ANSI: 5
[    1.391160] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5/input0
[    1.396958] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[    1.479155] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c529
[    1.479160] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.479163] usb 1-1.6: Product: USB Receiver
[    1.479166] usb 1-1.6: Manufacturer: Logitech
[    1.482285] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C529.0002/input/input3
[    1.534253] hid-generic 0003:046D:C529.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input0
[    1.537521] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C529.0003/input/input4
[    1.589169] hid-generic 0003:046D:C529.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input1
[    1.685305] ata4: SATA link down (SStatus 0 SControl 300)
[    1.997437] ata5: SATA link down (SStatus 0 SControl 300)
[    2.274619] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    2.277865] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    2.280982] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    2.284112] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
[    2.287357] scsi 6:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
[    2.289176] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.289191] sd 0:0:0:0: [sda] Write Protect is off
[    2.289193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.289218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.304400] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    2.309079] ata6: SATA link down (SStatus 0 SControl 300)
[    2.319197] clocksource: Switched to clocksource tsc
[    2.319807] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    2.322318] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    2.324811] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    2.327445] sd 6:0:0:4: [sdf] Attached SCSI removable disk
[    2.345756]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.347428] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.357122] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.357125] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.357255] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.345475] random: crng init done
[    3.694382] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.851476] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.910389] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.934249] systemd[1]: Detected architecture x86-64.
[    4.975868] systemd[1]: Set hostname to <anarchy>.
[    6.323109] systemd[1]: Created slice System Slice.
[    6.376634] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.377974] systemd[1]: Listening on Process Core Dump Socket.
[    6.378178] systemd[1]: Created slice User and Session Slice.
[    6.378264] systemd[1]: Reached target Slices.
[    6.378376] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.378524] systemd[1]: Listening on Journal Socket.
[    6.784030] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    6.981882] systemd-journald[236]: Received request to flush runtime journal from PID 1
[    9.296492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.304089] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247)
[    9.304097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.304131] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.394036] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.469324] rtc_cmos 00:01: RTC can wake from S4
[    9.469458] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    9.469485] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    9.540001] Linux agpgart interface v0.103
[    9.841282] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    9.967763] iTCO_vendor_support: vendor-support=0
[    9.992848] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.992888] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
[    9.992997] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.028402] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   10.117847] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.117858] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.118323] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0x000000008b499311, 78:e3:b5:9d:9f:75, XID 081000c0 IRQ 26
[   10.118326] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.442718] mousedev: PS/2 mouse device common for all mice
[   10.532355] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.201293] checking generic (f9000000 12c000) vs hw (d0000000 10000000)
[   11.201295] checking generic (f9000000 12c000) vs hw (f8000000 2000000)
[   11.201296] fb: switching to nouveaufb from simple
[   11.201317] Console: switching to colour dummy device 80x25
[   11.201493] nouveau 0000:01:00.0: NVIDIA G92 (092980a2)
[   11.272506] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.325853] nouveau 0000:01:00.0: bios: version 62.92.89.00.08
[   11.346336] nouveau 0000:01:00.0: fb: 512 MiB GDDR3
[   11.435693] [TTM] Zone  kernel: Available graphics memory: 4015678 kiB
[   11.435697] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   11.435698] [TTM] Initializing pool allocator
[   11.435707] [TTM] Initializing DMA pool allocator
[   11.435735] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[   11.435738] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   11.435745] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   11.435748] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   11.435753] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[   11.435757] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[   11.435761] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[   11.435765] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00020030
[   11.435768] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080
[   11.435772] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[   11.435775] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130
[   11.435778] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210
[   11.435781] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211
[   11.435784] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213
[   11.441377] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[   11.441379] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[   11.441406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.441407] [drm] Driver supports precise vblank timestamp query.
[   11.442804] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[   11.483890] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x70000, bo 0000000099cee530
[   11.485524] fbcon: nouveaufb (fb0) is primary device
[   11.591129] Console: switching to colour frame buffer device 180x56
[   11.658830] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   11.666943] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   11.779317] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   11.779322] cfg80211: failed to load regulatory.db
[   11.836753] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   11.836756] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.836758] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.836759] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.836760] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   11.836761] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.836762] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.836764] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.836765] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   11.854745] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.854866] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.854993] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.855113] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.855235] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.855348] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.855481] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.855632] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.255189] kvm: disabled by bios
[   12.281926] kvm: disabled by bios
[   12.314391] kvm: disabled by bios
[   12.350757] kvm: disabled by bios
[   12.702810] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   12.837358] usb 1-1.4: This Realtek USB WiFi dongle (0x2357:0x0107) is untested!
[   12.837361] usb 1-1.4: Please report results to Jes.Sorensen@gmail.com
[   13.005158] usb 1-1.4: Vendor: Realtek
[   13.005164] usb 1-1.4: Product: #802.11n NI
[   13.005168] usb 1-1.4: Serial: 
[   13.005174] usb 1-1.4: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[   13.005178] usb 1-1.4: 00: 29 81 00 7c 01 40 03 00
[   13.005183] usb 1-1.4: 08: 40 74 04 50 14 00 00 00
[   13.005187] usb 1-1.4: 10: 29 29 29 29 29 29 2c 2c
[   13.005191] usb 1-1.4: 18: 2c 2d 2d f2 ef ef ff ff
[   13.005195] usb 1-1.4: 20: ff ff ff ff ff ff ff ff
[   13.005199] usb 1-1.4: 28: ff ff ff ff ff ff ff ff
[   13.005203] usb 1-1.4: 30: ff ff ff ff ff ff ff ff
[   13.005208] usb 1-1.4: 38: ff ff 28 28 28 28 28 28
[   13.005212] usb 1-1.4: 40: 2a 2a 2a 2a 2a f2 ef ef
[   13.005216] usb 1-1.4: 48: ff ff ff ff ff ff ff ff
[   13.005220] usb 1-1.4: 50: ff ff ff ff ff ff ff ff
[   13.005224] usb 1-1.4: 58: ff ff ff ff ff ff ff ff
[   13.005228] usb 1-1.4: 60: ff ff ff ff ff ff ff ff
[   13.005232] usb 1-1.4: 68: ff ff ff ff ff ff ff ff
[   13.005236] usb 1-1.4: 70: ff ff ff ff ff ff ff ff
[   13.005240] usb 1-1.4: 78: ff ff ff ff ff ff ff ff
[   13.005244] usb 1-1.4: 80: ff ff ff ff ff ff ff ff
[   13.005248] usb 1-1.4: 88: ff ff ff ff ff ff ff ff
[   13.005253] usb 1-1.4: 90: ff ff ff ff ff ff ff ff
[   13.005257] usb 1-1.4: 98: ff ff ff ff ff ff ff ff
[   13.005261] usb 1-1.4: a0: ff ff ff ff ff ff ff ff
[   13.005265] usb 1-1.4: a8: ff ff ff ff ff ff ff ff
[   13.005269] usb 1-1.4: b0: ff ff ff ff ff ff ff ff
[   13.005273] usb 1-1.4: b8: a2 1f 1f 00 00 00 ff ff
[   13.005277] usb 1-1.4: c0: ff 01 00 10 00 00 00 ff
[   13.005281] usb 1-1.4: c8: 00 00 ff ff ff ff ff ff
[   13.005286] usb 1-1.4: d0: 57 23 07 01 e7 47 02 c0
[   13.005290] usb 1-1.4: d8: 25 e9 14 36 9c 0a 03 52
[   13.005294] usb 1-1.4: e0: 65 61 6c 74 65 6b 20 0e
[   13.005298] usb 1-1.4: e8: 03 38 30 32 2e 31 31 6e
[   13.005302] usb 1-1.4: f0: 20 4e 49 43 20 00 00 ff
[   13.005306] usb 1-1.4: f8: ff ff ff ff ff ff ff ff
[   13.005310] usb 1-1.4: 100: ff ff ff ff ff ff ff ff
[   13.005315] usb 1-1.4: 108: ff ff ff ff ff ff ff ff
[   13.005318] usb 1-1.4: 110: ff ff ff ff ff ff ff 0d
[   13.005322] usb 1-1.4: 118: 03 00 05 00 30 00 00 00
[   13.005326] usb 1-1.4: 120: 00 93 ff ff ff ff ff ff
[   13.005331] usb 1-1.4: 128: ff ff ff ff ff ff ff ff
[   13.005335] usb 1-1.4: 130: f6 a8 98 2d 03 92 98 00
[   13.005339] usb 1-1.4: 138: fc 8c 00 11 9b 44 02 0a
[   13.005343] usb 1-1.4: 140: ff ff ff ff ff ff ff ff
[   13.005348] usb 1-1.4: 148: ff ff ff ff ff ff ff ff
[   13.005352] usb 1-1.4: 150: ff ff ff ff ff ff ff ff
[   13.005356] usb 1-1.4: 158: ff ff ff ff ff ff ff ff
[   13.005360] usb 1-1.4: 160: ff ff ff ff ff ff ff ff
[   13.005364] usb 1-1.4: 168: ff ff ff ff ff ff ff ff
[   13.005368] usb 1-1.4: 170: ff ff ff ff ff ff ff ff
[   13.005372] usb 1-1.4: 178: ff ff ff ff ff ff ff ff
[   13.005376] usb 1-1.4: 180: ff ff ff ff ff ff ff ff
[   13.005380] usb 1-1.4: 188: ff ff ff ff ff ff ff ff
[   13.005383] usb 1-1.4: 190: ff ff ff ff ff ff ff ff
[   13.005388] usb 1-1.4: 198: ff ff ff ff ff ff ff ff
[   13.005392] usb 1-1.4: 1a0: ff ff ff ff ff ff ff ff
[   13.005396] usb 1-1.4: 1a8: ff ff ff ff ff ff ff ff
[   13.005400] usb 1-1.4: 1b0: ff ff ff ff ff ff ff ff
[   13.005404] usb 1-1.4: 1b8: ff ff ff ff ff ff ff ff
[   13.005408] usb 1-1.4: 1c0: ff ff ff ff ff ff ff ff
[   13.005412] usb 1-1.4: 1c8: ff ff ff ff ff ff ff ff
[   13.005416] usb 1-1.4: 1d0: ff ff ff ff ff ff ff ff
[   13.005420] usb 1-1.4: 1d8: ff ff ff ff ff ff ff ff
[   13.005424] usb 1-1.4: 1e0: ff ff ff ff ff ff ff ff
[   13.005428] usb 1-1.4: 1e8: ff ff ff ff ff ff ff ff
[   13.005432] usb 1-1.4: 1f0: ff ff ff ff ff ff ff ff
[   13.005436] usb 1-1.4: 1f8: ff ff ff ff ff ff ff ff
[   13.005443] usb 1-1.4: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[   13.005448] usb 1-1.4: RTL8192EU MAC: c0:25:e9:14:36:9c
[   13.005453] usb 1-1.4: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[   13.291178] usb 1-1.4: Firmware revision 19.0 (signature 0x92e1)
[   13.589695] Adding 8216572k swap on /dev/sda6.  Priority:-2 extents:1 across:8216572k FS
[   14.328861] usbcore: registered new interface driver rtl8xxxu
[   14.399618] rtl8xxxu 1-1.4:1.0 wlp0s26u1u4: renamed from wlan0
[   15.635318] r8169 0000:02:00.0 enp2s0: link down
[   15.635320] r8169 0000:02:00.0 enp2s0: link down
[   15.635416] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   15.651871] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[   17.418029] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.553872] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[   17.641183] r8169 0000:02:00.0 enp2s0: link up
[   17.652025] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   17.668534] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[   20.253850] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[   22.860159] fuse init (API version 7.26)
[  365.133881] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[  680.155820] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[  995.129569] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1310.272625] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1338.853348] systemd: 25 output lines suppressed due to ratelimiting
[ 1338.858428] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 1338.870307] systemd[1]: Detected architecture x86-64.
[ 1384.768650] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1385.976218] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1385.997898] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1386.198973] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1386.406958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1386.614957] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1387.911407] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1387.933597] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1388.134997] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1388.342956] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1388.550968] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1390.247726] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1390.271097] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1390.478958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1390.686957] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1390.894956] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1393.095713] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1393.118131] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1393.318968] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1393.526960] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1393.734906] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1403.931828] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[ 1403.943475] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[ 1404.149523] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[ 1404.350957] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[ 1404.558948] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[ 1410.004007] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1410.241525] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1718.845374] PM: suspend entry (deep)
[ 1718.845378] PM: Syncing filesystems ... done.
[ 1719.203682] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1719.205362] OOM killer disabled.
[ 1719.205363] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1719.206620] Suspending console(s) (use no_console_suspend to debug)
[ 1719.220891] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1719.259126] usb 1-1.4: disconnecting
[ 1719.259129] usb 1-1.4: Device still attached, trying to reset
[ 1719.286814] sd 0:0:0:0: [sda] Stopping disk
[ 1719.324894] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 1721.528274] ACPI: Preparing to enter system sleep state S3
[ 1721.528688] PM: Saving platform NVS memory
[ 1721.528895] Disabling non-boot CPUs ...
[ 1721.548366] smpboot: CPU 1 is now offline
[ 1721.576168] smpboot: CPU 2 is now offline
[ 1721.596160] smpboot: CPU 3 is now offline
[ 1721.597215] ACPI: Low-level resume complete
[ 1721.597261] PM: Restoring platform NVS memory
[ 1721.597636] Enabling non-boot CPUs ...
[ 1721.597683] x86: Booting SMP configuration:
[ 1721.597684] smpboot: Booting Node 0 Processor 1 APIC 0x4
[ 1721.600130]  cache: parent cpu1 should not be sleeping
[ 1721.600464] CPU1 is up
[ 1721.600497] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1721.602900]  cache: parent cpu2 should not be sleeping
[ 1721.603217] CPU2 is up
[ 1721.603248] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 1721.605648]  cache: parent cpu3 should not be sleeping
[ 1721.605965] CPU3 is up
[ 1721.608190] ACPI: Waking up from system sleep state S3
[ 1721.624126] sd 0:0:0:0: [sda] Starting disk
[ 1721.678673] r8169 0000:02:00.0 enp2s0: link down
[ 1721.803196] usb 1-1.4:1.0: rebind failed: -517
[ 1721.803371] OOM killer enabled.
[ 1721.803372] Restarting tasks ... done.
[ 1721.808090] PM: suspend exit
[ 1721.809782] usb 1-1.4: This Realtek USB WiFi dongle (0x2357:0x0107) is untested!
[ 1721.809784] usb 1-1.4: Please report results to Jes.Sorensen@gmail.com
[ 1721.945403] ata5: SATA link down (SStatus 0 SControl 300)
[ 1721.945433] ata4: SATA link down (SStatus 0 SControl 300)
[ 1721.945685] ata2: SATA link down (SStatus 0 SControl 300)
[ 1721.945820] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1721.953414] ata6: SATA link down (SStatus 0 SControl 300)
[ 1721.976108] ata3.00: configured for UDMA/100
[ 1721.997294] usb 1-1.4: Vendor: Realtek
[ 1721.997298] usb 1-1.4: Product: #802.11n NI
[ 1721.997301] usb 1-1.4: Serial: 
[ 1721.997305] usb 1-1.4: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 1721.997308] usb 1-1.4: 00: 29 81 00 7c 01 40 03 00
[ 1721.997311] usb 1-1.4: 08: 40 74 04 50 14 00 00 00
[ 1721.997315] usb 1-1.4: 10: 29 29 29 29 29 29 2c 2c
[ 1721.997317] usb 1-1.4: 18: 2c 2d 2d f2 ef ef ff ff
[ 1721.997320] usb 1-1.4: 20: ff ff ff ff ff ff ff ff
[ 1721.997323] usb 1-1.4: 28: ff ff ff ff ff ff ff ff
[ 1721.997326] usb 1-1.4: 30: ff ff ff ff ff ff ff ff
[ 1721.997329] usb 1-1.4: 38: ff ff 28 28 28 28 28 28
[ 1721.997332] usb 1-1.4: 40: 2a 2a 2a 2a 2a f2 ef ef
[ 1721.997335] usb 1-1.4: 48: ff ff ff ff ff ff ff ff
[ 1721.997338] usb 1-1.4: 50: ff ff ff ff ff ff ff ff
[ 1721.997340] usb 1-1.4: 58: ff ff ff ff ff ff ff ff
[ 1721.997343] usb 1-1.4: 60: ff ff ff ff ff ff ff ff
[ 1721.997346] usb 1-1.4: 68: ff ff ff ff ff ff ff ff
[ 1721.997349] usb 1-1.4: 70: ff ff ff ff ff ff ff ff
[ 1721.997352] usb 1-1.4: 78: ff ff ff ff ff ff ff ff
[ 1721.997355] usb 1-1.4: 80: ff ff ff ff ff ff ff ff
[ 1721.997357] usb 1-1.4: 88: ff ff ff ff ff ff ff ff
[ 1721.997360] usb 1-1.4: 90: ff ff ff ff ff ff ff ff
[ 1721.997363] usb 1-1.4: 98: ff ff ff ff ff ff ff ff
[ 1721.997366] usb 1-1.4: a0: ff ff ff ff ff ff ff ff
[ 1721.997369] usb 1-1.4: a8: ff ff ff ff ff ff ff ff
[ 1721.997372] usb 1-1.4: b0: ff ff ff ff ff ff ff ff
[ 1721.997374] usb 1-1.4: b8: a2 1f 1f 00 00 00 ff ff
[ 1721.997377] usb 1-1.4: c0: ff 01 00 10 00 00 00 ff
[ 1721.997380] usb 1-1.4: c8: 00 00 ff ff ff ff ff ff
[ 1721.997383] usb 1-1.4: d0: 57 23 07 01 e7 47 02 c0
[ 1721.997386] usb 1-1.4: d8: 25 e9 14 36 9c 0a 03 52
[ 1721.997389] usb 1-1.4: e0: 65 61 6c 74 65 6b 20 0e
[ 1721.997392] usb 1-1.4: e8: 03 38 30 32 2e 31 31 6e
[ 1721.997394] usb 1-1.4: f0: 20 4e 49 43 20 00 00 ff
[ 1721.997397] usb 1-1.4: f8: ff ff ff ff ff ff ff ff
[ 1721.997400] usb 1-1.4: 100: ff ff ff ff ff ff ff ff
[ 1721.997403] usb 1-1.4: 108: ff ff ff ff ff ff ff ff
[ 1721.997406] usb 1-1.4: 110: ff ff ff ff ff ff ff 0d
[ 1721.997409] usb 1-1.4: 118: 03 00 05 00 30 00 00 00
[ 1721.997412] usb 1-1.4: 120: 00 93 ff ff ff ff ff ff
[ 1721.997414] usb 1-1.4: 128: ff ff ff ff ff ff ff ff
[ 1721.997417] usb 1-1.4: 130: f6 a8 98 2d 03 92 98 00
[ 1721.997420] usb 1-1.4: 138: fc 8c 00 11 9b 44 02 0a
[ 1721.997423] usb 1-1.4: 140: ff ff ff ff ff ff ff ff
[ 1721.997426] usb 1-1.4: 148: ff ff ff ff ff ff ff ff
[ 1721.997429] usb 1-1.4: 150: ff ff ff ff ff ff ff ff
[ 1721.997431] usb 1-1.4: 158: ff ff ff ff ff ff ff ff
[ 1721.997434] usb 1-1.4: 160: ff ff ff ff ff ff ff ff
[ 1721.997437] usb 1-1.4: 168: ff ff ff ff ff ff ff ff
[ 1721.997440] usb 1-1.4: 170: ff ff ff ff ff ff ff ff
[ 1721.997443] usb 1-1.4: 178: ff ff ff ff ff ff ff ff
[ 1721.997446] usb 1-1.4: 180: ff ff ff ff ff ff ff ff
[ 1721.997449] usb 1-1.4: 188: ff ff ff ff ff ff ff ff
[ 1721.997451] usb 1-1.4: 190: ff ff ff ff ff ff ff ff
[ 1721.997454] usb 1-1.4: 198: ff ff ff ff ff ff ff ff
[ 1721.997457] usb 1-1.4: 1a0: ff ff ff ff ff ff ff ff
[ 1721.997460] usb 1-1.4: 1a8: ff ff ff ff ff ff ff ff
[ 1721.997463] usb 1-1.4: 1b0: ff ff ff ff ff ff ff ff
[ 1721.997466] usb 1-1.4: 1b8: ff ff ff ff ff ff ff ff
[ 1721.997469] usb 1-1.4: 1c0: ff ff ff ff ff ff ff ff
[ 1721.997471] usb 1-1.4: 1c8: ff ff ff ff ff ff ff ff
[ 1721.997474] usb 1-1.4: 1d0: ff ff ff ff ff ff ff ff
[ 1721.997477] usb 1-1.4: 1d8: ff ff ff ff ff ff ff ff
[ 1721.997480] usb 1-1.4: 1e0: ff ff ff ff ff ff ff ff
[ 1721.997483] usb 1-1.4: 1e8: ff ff ff ff ff ff ff ff
[ 1721.997486] usb 1-1.4: 1f0: ff ff ff ff ff ff ff ff
[ 1721.997488] usb 1-1.4: 1f8: ff ff ff ff ff ff ff ff
[ 1721.997494] usb 1-1.4: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 1721.997498] usb 1-1.4: RTL8192EU MAC: c0:25:e9:14:36:9c
[ 1721.997502] usb 1-1.4: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 1721.997518] usb 1-1.4: Firmware revision 19.0 (signature 0x92e1)
[ 1722.176090] firewire_core 0000:03:00.0: rediscovered device fw0
[ 1722.827361] hrtimer: interrupt took 957 ns
[ 1724.062168] r8169 0000:02:00.0 enp2s0: link up
[ 1726.989078] ata1: link is slow to respond, please be patient (ready=0)
[ 1728.289113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1728.786118] ata1.00: configured for UDMA/100
[ 1728.979844] rtl8xxxu 1-1.4:1.0 wlp0s26u1u4: renamed from wlan0
[ 1729.048438] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.055187] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1730.112410] r8169 0000:02:00.0 enp2s0: link down
[ 1730.112482] r8169 0000:02:00.0 enp2s0: link down
[ 1730.112500] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1730.118795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.230876] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1730.271620] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 1732.732680] r8169 0000:02:00.0 enp2s0: link up
[ 1732.732695] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 1739.059561] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1739.120914] ISOFS: changing to secondary root
[ 2075.179168] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 2390.160866] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 2705.177194] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3020.225385] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3335.241672] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3651.236866] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 3967.273190] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4272.499899] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 4283.257169] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4599.266581] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 4915.306152] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5231.310380] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5547.313679] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 5863.235744] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6179.301817] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6438.214071] perf: interrupt took too long (3158 > 3150), lowering kernel.perf_event_max_sample_rate to 63000
[ 6495.240293] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 6811.315360] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7127.253405] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7443.312130] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 7759.307916] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8075.249039] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8391.271479] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 8707.293039] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9023.238740] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9339.252150] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9655.238000] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[ 9971.247325] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10287.269608] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10603.304746] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[10797.475103] perf: interrupt took too long (3950 > 3947), lowering kernel.perf_event_max_sample_rate to 50000
[10919.293021] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11235.303352] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11551.245648] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[11867.266591] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12183.312914] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12499.269267] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[12815.257337] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13131.309776] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13447.266453] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[13763.245639] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14079.310880] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14395.276282] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[14711.298907] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15027.251464] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15343.243904] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15659.276728] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[15975.236513] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16291.266739] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16607.293282] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[16923.298235] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17239.308215] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17555.279243] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[17871.267691] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18187.249136] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18503.268213] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[18819.297526] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19135.222852] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19450.305175] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[19766.243271] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20082.237252] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20398.248420] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[20714.291244] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21030.246992] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21346.257254] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21662.250920] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[21978.298557] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22294.241122] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22610.253255] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[22926.312699] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23242.311312] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23558.306840] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[23874.252709] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24190.258803] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24506.244686] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[24822.269880] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25138.289363] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25454.316520] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[25770.312641] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26086.317445] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26402.249854] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26718.240857] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[26890.558495] perf: interrupt took too long (4939 > 4937), lowering kernel.perf_event_max_sample_rate to 40000
[27034.257884] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27350.257735] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27666.283667] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[27982.244715] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28298.293047] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28614.236808] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[28930.247306] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29246.250803] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29562.282692] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[29878.288724] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30194.308165] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30510.318693] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[30826.271382] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31142.231590] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31458.258652] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[31774.293995] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32090.253045] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32406.297376] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[32722.233815] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33038.251513] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33354.268677] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33670.277900] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[33986.245248] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34302.252763] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34618.262977] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[34934.255706] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35250.254849] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35566.248440] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[35882.279523] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36198.246083] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36514.288634] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[36830.265110] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37146.295932] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37462.248128] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[37778.253952] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38094.289360] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38410.252808] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[38726.236070] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39042.249117] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39358.252431] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39674.264113] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[39990.294624] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40306.316271] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40622.255935] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[40938.302401] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41254.245326] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41570.260675] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[41886.260341] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42202.246661] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42518.233898] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[42834.262588] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43150.258622] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43466.257324] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[43782.257544] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44098.255878] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44414.300906] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[44730.247357] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45046.253833] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45362.288783] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45678.259353] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[45994.251430] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46310.273720] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46626.260438] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[46942.305019] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47258.256681] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47574.275410] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[47890.244062] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48206.267293] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48522.233616] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[48838.280277] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49154.262012] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49470.251545] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[49786.247923] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50102.298226] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50418.251143] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[50734.236606] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51050.263556] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51366.264630] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51682.264923] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[51998.243641] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52314.249562] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52630.308289] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[52946.288456] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53262.242530] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53578.231003] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[53894.257205] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54210.258486] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54526.288723] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[54842.305254] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55158.281459] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55474.273023] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[55790.306897] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56106.250538] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56422.244531] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[56738.240465] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57054.269795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57370.243012] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[57686.267425] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58002.264118] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58318.249699] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58634.303394] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[58950.256054] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59266.246883] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59582.265198] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[59898.254675] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60214.310627] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60530.253937] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[60846.254006] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61162.284829] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61478.244159] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[61794.285387] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62110.244298] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62426.257585] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[62742.257660] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63058.235889] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63374.252549] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[63690.300085] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64006.267102] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64322.269384] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64638.251996] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[64954.264687] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65270.284147] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65586.291075] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[65902.243872] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66218.268742] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66534.259414] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[66850.312236] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67166.313302] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67482.314631] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[67798.266815] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68114.236985] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68430.229974] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68746.237795] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68813.623177] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68814.840080] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68814.861640] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68815.062744] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68815.270775] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68815.478795] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68816.775426] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68816.797422] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68816.998796] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68817.206809] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68817.414783] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68819.119591] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68819.141434] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68819.342778] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68819.550768] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68819.758767] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68821.951597] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68821.973675] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68822.174815] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68822.377458] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68822.582154] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68832.783928] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[68832.795672] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[68832.998749] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[68833.206791] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[68833.414782] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[68839.003285] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[68839.242980] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69181.253004] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69276.136412] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69277.335991] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69277.358029] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69277.558816] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69277.766815] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69277.974787] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69289.175216] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69289.197898] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69289.398788] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69289.606766] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69289.814802] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69301.003809] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69301.241405] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69315.864781] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69317.064085] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69317.086542] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69317.286813] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69317.494788] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69317.702824] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69328.903645] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69328.926015] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69329.126798] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69329.334755] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69329.542787] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69341.002536] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69341.228306] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69411.192308] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69412.391884] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69412.413732] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69412.614771] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69412.822799] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69413.027854] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69424.231600] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69424.253428] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69424.454825] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69424.662798] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69424.870816] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69436.053387] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69436.295944] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69450.886094] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69452.079589] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69452.102562] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69452.302725] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69452.510737] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69452.718791] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69457.467494] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69457.667099] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69469.724943] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69470.927905] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69470.951941] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69471.158828] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69471.366751] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69471.574782] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69482.783530] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69482.805822] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69483.006821] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69483.214779] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69483.422784] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69495.043883] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69495.279827] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69837.262526] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69904.879797] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69935.039724] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69935.290180] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69970.028067] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69971.224181] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69971.245958] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69971.446718] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69971.654725] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69971.862790] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69983.063596] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[69983.086056] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[69983.286829] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[69983.494744] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[69983.702775] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[69995.002015] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[69995.256193] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70155.426073] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70156.624181] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[70156.646094] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[70156.846772] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[70157.054758] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[70157.262755] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[70168.463274] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[70168.485351] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[70168.686757] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[70168.894828] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[70169.102760] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[70181.002645] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70181.232985] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70522.232957] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70838.259648] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70950.449030] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70981.033114] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[70981.272914] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71014.864692] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71016.071699] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[71016.094300] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[71016.294753] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[71016.502703] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[71016.710749] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[71027.911502] wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
[71027.933894] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
[71028.134746] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
[71028.342754] wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
[71028.550762] wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
[71040.031388] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
[71040.273420] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready 

The output of 'journalctl -xe' was:

 -- Logs begin at Thu 2018-01-25 03:23:56 EST, end at Wed 2018-02-14 08:27:01 EST. --
Feb 14 03:42:47 anarchy NetworkManager[343]: <info>  [1518597767.6306] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:88:F4:63:58:D2 (scanning)
Feb 14 03:42:47 anarchy NetworkManager[343]: <info>  [1518597767.6480] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:42:47 anarchy NetworkManager[343]: <info>  [1518597767.6675] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:42:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:48:03 anarchy NetworkManager[343]: <info>  [1518598083.6550] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:3E:86:2A:64:CD (scanning)
Feb 14 03:48:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:48:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:3e:86:2a:64:cd
Feb 14 03:48:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:48:03 anarchy NetworkManager[343]: <info>  [1518598083.6749] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:48:03 anarchy NetworkManager[343]: <info>  [1518598083.6904] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:53:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: fa:d8:eb:a5:09:35
Feb 14 03:53:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:53:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:53:19 anarchy NetworkManager[343]: <info>  [1518598399.6514] device (wlp0s26u1u4): set-hw-addr: set MAC address to FA:D8:EB:A5:09:35 (scanning)
Feb 14 03:53:19 anarchy NetworkManager[343]: <info>  [1518598399.6706] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:53:19 anarchy NetworkManager[343]: <info>  [1518598399.6822] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 03:58:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 62:9a:ea:85:56:4f
Feb 14 03:58:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 03:58:35 anarchy NetworkManager[343]: <info>  [1518598715.6372] device (wlp0s26u1u4): set-hw-addr: set MAC address to 62:9A:EA:85:56:4F (scanning)
Feb 14 03:58:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 03:58:35 anarchy NetworkManager[343]: <info>  [1518598715.6553] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 03:58:35 anarchy NetworkManager[343]: <info>  [1518598715.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:03:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 4e:ce:e7:4d:34:d3
Feb 14 04:03:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:03:51 anarchy NetworkManager[343]: <info>  [1518599031.6909] device (wlp0s26u1u4): set-hw-addr: set MAC address to 4E:CE:E7:4D:34:D3 (scanning)
Feb 14 04:03:51 anarchy NetworkManager[343]: <info>  [1518599031.7089] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:03:51 anarchy NetworkManager[343]: <info>  [1518599031.7270] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:03:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:09:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2a:6b:68:31:44:fe
Feb 14 04:09:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:09:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:09:07 anarchy NetworkManager[343]: <info>  [1518599347.6438] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2A:6B:68:31:44:FE (scanning)
Feb 14 04:09:07 anarchy NetworkManager[343]: <info>  [1518599347.6616] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:09:07 anarchy NetworkManager[343]: <info>  [1518599347.6872] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:14:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: f2:f6:9d:92:4b:d6
Feb 14 04:14:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:14:23 anarchy NetworkManager[343]: <info>  [1518599663.6344] device (wlp0s26u1u4): set-hw-addr: set MAC address to F2:F6:9D:92:4B:D6 (scanning)
Feb 14 04:14:23 anarchy NetworkManager[343]: <info>  [1518599663.6530] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:14:23 anarchy NetworkManager[343]: <info>  [1518599663.6711] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:14:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:19:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c6:0a:56:df:ab:b8
Feb 14 04:19:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:19:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:19:39 anarchy NetworkManager[343]: <info>  [1518599979.6528] device (wlp0s26u1u4): set-hw-addr: set MAC address to C6:0A:56:DF:AB:B8 (scanning)
Feb 14 04:19:39 anarchy NetworkManager[343]: <info>  [1518599979.6708] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:19:39 anarchy NetworkManager[343]: <info>  [1518599979.6910] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:24:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7e:66:75:4e:c1:7e
Feb 14 04:24:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:24:55 anarchy NetworkManager[343]: <info>  [1518600295.6422] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7E:66:75:4E:C1:7E (scanning)
Feb 14 04:24:55 anarchy NetworkManager[343]: <info>  [1518600295.6599] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:24:55 anarchy NetworkManager[343]: <info>  [1518600295.6779] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:24:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:30:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:78:62:8c:06:8f
Feb 14 04:30:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:30:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:30:11 anarchy NetworkManager[343]: <info>  [1518600611.6982] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:78:62:8C:06:8F (scanning)
Feb 14 04:30:11 anarchy NetworkManager[343]: <info>  [1518600611.7159] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:30:11 anarchy NetworkManager[343]: <info>  [1518600611.7310] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:35:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1e:08:bd:cf:70:a0
Feb 14 04:35:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:35:27 anarchy NetworkManager[343]: <info>  [1518600927.6412] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1E:08:BD:CF:70:A0 (scanning)
Feb 14 04:35:27 anarchy NetworkManager[343]: <info>  [1518600927.6605] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:35:27 anarchy NetworkManager[343]: <info>  [1518600927.6714] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:35:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:40:43 anarchy NetworkManager[343]: <info>  [1518601243.6417] device (wlp0s26u1u4): set-hw-addr: set MAC address to AE:8F:08:F7:0A:2E (scanning)
Feb 14 04:40:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:40:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ae:8f:08:f7:0a:2e
Feb 14 04:40:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:40:43 anarchy NetworkManager[343]: <info>  [1518601243.6609] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:40:43 anarchy NetworkManager[343]: <info>  [1518601243.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:45:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: f6:83:fb:e4:3f:4b
Feb 14 04:45:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:45:59 anarchy NetworkManager[343]: <info>  [1518601559.6723] device (wlp0s26u1u4): set-hw-addr: set MAC address to F6:83:FB:E4:3F:4B (scanning)
Feb 14 04:45:59 anarchy NetworkManager[343]: <info>  [1518601559.6902] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:45:59 anarchy NetworkManager[343]: <info>  [1518601559.7052] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:45:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:51:15 anarchy NetworkManager[343]: <info>  [1518601875.6316] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:2B:6F:07:86:DF (scanning)
Feb 14 04:51:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:51:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:2b:6f:07:86:df
Feb 14 04:51:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 04:51:15 anarchy NetworkManager[343]: <info>  [1518601875.6493] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:51:15 anarchy NetworkManager[343]: <info>  [1518601875.6637] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:56:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2a:59:90:85:b0:3c
Feb 14 04:56:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 04:56:31 anarchy NetworkManager[343]: <info>  [1518602191.6731] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2A:59:90:85:B0:3C (scanning)
Feb 14 04:56:31 anarchy NetworkManager[343]: <info>  [1518602191.6913] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 04:56:31 anarchy NetworkManager[343]: <info>  [1518602191.7146] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 04:56:31 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:01:47 anarchy NetworkManager[343]: <info>  [1518602507.6319] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:00:9C:80:2C:67 (scanning)
Feb 14 05:01:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:01:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:01:47 anarchy NetworkManager[343]: <info>  [1518602507.6496] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:01:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:00:9c:80:2c:67
Feb 14 05:01:47 anarchy NetworkManager[343]: <info>  [1518602507.6672] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:07:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:16:cf:11:ca:6c
Feb 14 05:07:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:07:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:07:03 anarchy NetworkManager[343]: <info>  [1518602823.6453] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:16:CF:11:CA:6C (scanning)
Feb 14 05:07:03 anarchy NetworkManager[343]: <info>  [1518602823.6630] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:07:03 anarchy NetworkManager[343]: <info>  [1518602823.6830] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:12:19 anarchy NetworkManager[343]: <info>  [1518603139.6449] device (wlp0s26u1u4): set-hw-addr: set MAC address to CE:82:3E:6B:9B:42 (scanning)
Feb 14 05:12:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:12:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ce:82:3e:6b:9b:42
Feb 14 05:12:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:12:19 anarchy NetworkManager[343]: <info>  [1518603139.6630] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:12:19 anarchy NetworkManager[343]: <info>  [1518603139.6833] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:17:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7a:25:24:98:95:3f
Feb 14 05:17:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:17:35 anarchy NetworkManager[343]: <info>  [1518603455.6234] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7A:25:24:98:95:3F (scanning)
Feb 14 05:17:35 anarchy NetworkManager[343]: <info>  [1518603455.6412] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:17:35 anarchy NetworkManager[343]: <info>  [1518603455.6593] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:17:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:22:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: b6:6a:98:5b:d9:ef
Feb 14 05:22:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:22:51 anarchy NetworkManager[343]: <info>  [1518603771.6400] device (wlp0s26u1u4): set-hw-addr: set MAC address to B6:6A:98:5B:D9:EF (scanning)
Feb 14 05:22:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:22:51 anarchy NetworkManager[343]: <info>  [1518603771.6578] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:22:51 anarchy NetworkManager[343]: <info>  [1518603771.6753] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:28:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:6f:28:d0:d2:27
Feb 14 05:28:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:28:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:28:07 anarchy NetworkManager[343]: <info>  [1518604087.6877] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:6F:28:D0:D2:27 (scanning)
Feb 14 05:28:07 anarchy NetworkManager[343]: <info>  [1518604087.7059] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:28:07 anarchy NetworkManager[343]: <info>  [1518604087.7211] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:33:23 anarchy NetworkManager[343]: <info>  [1518604403.6549] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:72:FE:24:73:CD (scanning)
Feb 14 05:33:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:33:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:72:fe:24:73:cd
Feb 14 05:33:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:33:23 anarchy NetworkManager[343]: <info>  [1518604403.6728] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:33:23 anarchy NetworkManager[343]: <info>  [1518604403.6873] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:38:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: fe:0b:17:5b:3a:02
Feb 14 05:38:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:38:39 anarchy NetworkManager[343]: <info>  [1518604719.6572] device (wlp0s26u1u4): set-hw-addr: set MAC address to FE:0B:17:5B:3A:02 (scanning)
Feb 14 05:38:39 anarchy NetworkManager[343]: <info>  [1518604719.6758] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:38:39 anarchy NetworkManager[343]: <info>  [1518604719.6952] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:38:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:43:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 36:71:5d:04:a6:8d
Feb 14 05:43:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:43:55 anarchy NetworkManager[343]: <info>  [1518605035.6398] device (wlp0s26u1u4): set-hw-addr: set MAC address to 36:71:5D:04:A6:8D (scanning)
Feb 14 05:43:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:43:55 anarchy NetworkManager[343]: <info>  [1518605035.6596] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:43:55 anarchy NetworkManager[343]: <info>  [1518605035.6752] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:49:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 7a:13:d8:92:64:34
Feb 14 05:49:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:49:11 anarchy NetworkManager[343]: <info>  [1518605351.6525] device (wlp0s26u1u4): set-hw-addr: set MAC address to 7A:13:D8:92:64:34 (scanning)
Feb 14 05:49:11 anarchy NetworkManager[343]: <info>  [1518605351.6703] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:49:11 anarchy NetworkManager[343]: <info>  [1518605351.6889] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:49:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:54:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 52:c7:6d:7b:73:07
Feb 14 05:54:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:54:27 anarchy NetworkManager[343]: <info>  [1518605667.6718] device (wlp0s26u1u4): set-hw-addr: set MAC address to 52:C7:6D:7B:73:07 (scanning)
Feb 14 05:54:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 05:54:27 anarchy NetworkManager[343]: <info>  [1518605667.6901] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:54:27 anarchy NetworkManager[343]: <info>  [1518605667.7090] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:59:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:a8:0d:a9:d9:09
Feb 14 05:59:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 05:59:43 anarchy NetworkManager[343]: <info>  [1518605983.6788] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:A8:0D:A9:D9:09 (scanning)
Feb 14 05:59:43 anarchy NetworkManager[343]: <info>  [1518605983.6999] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 05:59:43 anarchy NetworkManager[343]: <info>  [1518605983.7118] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 05:59:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:04:59 anarchy NetworkManager[343]: <info>  [1518606299.6310] device (wlp0s26u1u4): set-hw-addr: set MAC address to 8E:A9:F1:65:D8:4B (scanning)
Feb 14 06:04:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:04:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 8e:a9:f1:65:d8:4b
Feb 14 06:04:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:04:59 anarchy NetworkManager[343]: <info>  [1518606299.6495] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:04:59 anarchy NetworkManager[343]: <info>  [1518606299.6674] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:10:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 76:60:91:4e:7d:41
Feb 14 06:10:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:10:15 anarchy NetworkManager[343]: <info>  [1518606615.6564] device (wlp0s26u1u4): set-hw-addr: set MAC address to 76:60:91:4E:7D:41 (scanning)
Feb 14 06:10:15 anarchy NetworkManager[343]: <info>  [1518606615.6759] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:10:15 anarchy NetworkManager[343]: <info>  [1518606615.6914] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:10:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:15:31 anarchy NetworkManager[343]: <info>  [1518606931.6471] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1A:C5:28:77:EA:A5 (scanning)
Feb 14 06:15:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:15:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1a:c5:28:77:ea:a5
Feb 14 06:15:31 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:15:31 anarchy NetworkManager[343]: <info>  [1518606931.6652] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:15:31 anarchy NetworkManager[343]: <info>  [1518606931.6828] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:20:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ea:7f:d2:39:c1:11
Feb 14 06:20:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:20:47 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:20:47 anarchy NetworkManager[343]: <info>  [1518607247.7001] device (wlp0s26u1u4): set-hw-addr: set MAC address to EA:7F:D2:39:C1:11 (scanning)
Feb 14 06:20:47 anarchy NetworkManager[343]: <info>  [1518607247.7189] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:20:47 anarchy NetworkManager[343]: <info>  [1518607247.7393] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:26:03 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:2f:91:b8:b3:eb
Feb 14 06:26:03 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:26:03 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:26:03 anarchy NetworkManager[343]: <info>  [1518607563.7004] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:2F:91:B8:B3:EB (scanning)
Feb 14 06:26:03 anarchy NetworkManager[343]: <info>  [1518607563.7191] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:26:03 anarchy NetworkManager[343]: <info>  [1518607563.7365] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:31:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 46:60:db:d3:74:0f
Feb 14 06:31:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:31:19 anarchy NetworkManager[343]: <info>  [1518607879.7024] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:60:DB:D3:74:0F (scanning)
Feb 14 06:31:19 anarchy NetworkManager[343]: <info>  [1518607879.7216] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:31:19 anarchy NetworkManager[343]: <info>  [1518607879.7351] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:31:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:36:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: be:0b:fb:71:64:7d
Feb 14 06:36:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:36:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:36:35 anarchy NetworkManager[343]: <info>  [1518608195.6546] device (wlp0s26u1u4): set-hw-addr: set MAC address to BE:0B:FB:71:64:7D (scanning)
Feb 14 06:36:35 anarchy NetworkManager[343]: <info>  [1518608195.6731] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:36:35 anarchy NetworkManager[343]: <info>  [1518608195.6871] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:41:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: a6:08:51:9a:d8:ad
Feb 14 06:41:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:41:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:41:51 anarchy NetworkManager[343]: <info>  [1518608511.6249] device (wlp0s26u1u4): set-hw-addr: set MAC address to A6:08:51:9A:D8:AD (scanning)
Feb 14 06:41:51 anarchy NetworkManager[343]: <info>  [1518608511.6423] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:41:51 anarchy NetworkManager[343]: <info>  [1518608511.6581] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:47:07 anarchy NetworkManager[343]: <info>  [1518608827.6178] device (wlp0s26u1u4): set-hw-addr: set MAC address to E2:73:5F:00:CC:FF (scanning)
Feb 14 06:47:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:47:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:47:07 anarchy NetworkManager[343]: <info>  [1518608827.6359] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:47:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e2:73:5f:00:cc:ff
Feb 14 06:47:07 anarchy NetworkManager[343]: <info>  [1518608827.6552] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:52:12 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.845' (uid=1000 pid=32489 comm="gpk-application ")
Feb 14 06:52:12 anarchy systemd[1]: Starting PackageKit Daemon...
-- Subject: Unit packagekit.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit packagekit.service has begun starting up.
Feb 14 06:52:12 anarchy PackageKit[32500]: daemon start
Feb 14 06:52:12 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 14 06:52:12 anarchy systemd[1]: Started PackageKit Daemon.
-- Subject: Unit packagekit.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit packagekit.service has finished starting up.
-- 
-- The start-up result is RESULT.
Feb 14 06:52:12 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating service name='ca.desrt.dconf' requested by ':1.63' (uid=1000 pid=32489 comm="gpk-application ")
Feb 14 06:52:12 anarchy PackageKit[32500]: get-repo-list transaction /1_ebedbadb from uid 1000 finished with success after 0ms
Feb 14 06:52:12 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'ca.desrt.dconf'
Feb 14 06:52:14 anarchy PackageKit[32500]: search-group transaction /2_aeabeded from uid 1000 finished with success after 247ms
Feb 14 06:52:21 anarchy PackageKit[32500]: search-group transaction /3_ccdbbdcb from uid 1000 finished with success after 7ms
Feb 14 06:52:23 anarchy PackageKit[32500]: search-group transaction /4_dbeadbbc from uid 1000 finished with success after 3ms
Feb 14 06:52:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 46:95:79:bf:f7:8b
Feb 14 06:52:23 anarchy NetworkManager[343]: <info>  [1518609143.6257] device (wlp0s26u1u4): set-hw-addr: set MAC address to 46:95:79:BF:F7:8B (scanning)
Feb 14 06:52:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:52:23 anarchy NetworkManager[343]: <info>  [1518609143.6437] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:52:23 anarchy NetworkManager[343]: <info>  [1518609143.6595] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:52:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:52:32 anarchy PackageKit[32500]: search-group transaction /5_abaaecbd from uid 1000 finished with success after 4ms
Feb 14 06:52:43 anarchy PackageKit[32500]: search-name transaction /6_cdadbdad from uid 1000 finished with success after 9ms
Feb 14 06:52:51 anarchy PackageKit[32500]: search-name transaction /7_dabeeacb from uid 1000 finished with success after 5ms
Feb 14 06:52:53 anarchy PackageKit[32500]: get-details transaction /8_eedaccbe from uid 1000 finished with success after 0ms
Feb 14 06:53:00 anarchy PackageKit[32500]: new remove-packages transaction /9_aacddada scheduled from uid 1000
Feb 14 06:53:00 anarchy PackageKit[32500]: in /9_aacddada for remove-packages package wifi-radar;2.0.s10-1;any;installed was removing for uid 1000
Feb 14 06:53:00 anarchy PackageKit[32500]: remove-packages transaction /9_aacddada from uid 1000 finished with success after 27ms
Feb 14 06:53:00 anarchy PackageKit[32500]: get-details transaction /10_eeadbbbb from uid 1000 finished with success after 0ms
Feb 14 06:53:03 anarchy PackageKit[32500]: uid 1000 is trying to obtain org.freedesktop.packagekit.package-remove auth (only_trusted:0)
Feb 14 06:53:09 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.packagekit.package-remove for system-bus-name::1.845 [gpk-application] (owned by unix-user:woodani)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: new remove-packages transaction /11_eeadaedc scheduled from uid 1000
Feb 14 06:53:09 anarchy PackageKit[32500]: uid 1000 obtained auth for org.freedesktop.packagekit.package-remove
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m0% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m5% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m11% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m16% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m22% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m27% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m33% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m38% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m44% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m50% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m55% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m61% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m66% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m72% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m77% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m83% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m88% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m94% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39m100% of wifi-radar complete (1 of 1)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39mHook systemd-update.hook (Arming ConditionNeedsUpdate...) complete (1 of 2)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: [0;1;39m[0;1;31m[0;1;39mHook update-desktop-database.hook (Updating the desktop file MIME type cache...) complete (2 of 2)[0m
Feb 14 06:53:09 anarchy PackageKit[32500]: in /11_eeadaedc for remove-packages package wifi-radar;2.0.s10-1;any;installed was removing for uid 1000
Feb 14 06:53:09 anarchy PackageKit[32500]: remove-packages transaction /11_eeadaedc from uid 1000 finished with success after 111ms
Feb 14 06:53:09 anarchy PackageKit[32500]: search-name transaction /12_cdcdadec from uid 1000 finished with success after 11ms
Feb 14 06:53:26 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating via systemd: service name='org.freedesktop.Notifications' unit='xfce4-notifyd.service' requested by ':1.39' (uid=1000 pid=654 comm="nm-applet ")
Feb 14 06:53:26 anarchy systemd[537]: Starting XFCE notifications service...
-- Subject: Unit UNIT has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit UNIT has begun starting up.
Feb 14 06:53:26 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'org.freedesktop.Notifications'
Feb 14 06:53:26 anarchy systemd[537]: Started XFCE notifications service.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit UNIT has finished starting up.
-- 
-- The start-up result is RESULT.
Feb 14 06:53:30 anarchy NetworkManager[343]: <info>  [1518609210.8519] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 06:53:30 anarchy NetworkManager[343]: <info>  [1518609210.8520] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 06:53:30 anarchy NetworkManager[343]: <info>  [1518609210.8522] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0111] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 06:53:31 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0315] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0323] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0335] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0335] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0338] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0414] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0418] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0422] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0422] Config: added 'ssid' value 'dlink'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0422] Config: added 'scan_ssid' value '1'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0422] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0423] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0423] Config: added 'psk' value '<hidden>'
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0511] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:53:31 anarchy NetworkManager[343]: <info>  [1518609211.0670] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 06:53:32 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:32 anarchy NetworkManager[343]: <info>  [1518609212.2657] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:32 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:32 anarchy NetworkManager[343]: <info>  [1518609212.9077] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:33 anarchy NetworkManager[343]: <info>  [1518609213.0078] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:34 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:34 anarchy NetworkManager[343]: <info>  [1518609214.2015] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:34 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:34 anarchy NetworkManager[343]: <info>  [1518609214.8437] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:35 anarchy NetworkManager[343]: <info>  [1518609215.3445] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:36 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:36 anarchy NetworkManager[343]: <info>  [1518609216.5457] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:36 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:37 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:37 anarchy NetworkManager[343]: <info>  [1518609217.1867] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:38 anarchy NetworkManager[343]: <info>  [1518609218.1879] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:39 anarchy NetworkManager[343]: <info>  [1518609219.3778] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:39 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 06:53:40 anarchy NetworkManager[343]: <info>  [1518609220.0121] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:45 anarchy NetworkManager[343]: <info>  [1518609225.0169] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 06:53:50 anarchy NetworkManager[343]: <info>  [1518609230.2001] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 06:53:50 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 06:53:50 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 06:53:50 anarchy NetworkManager[343]: <info>  [1518609230.8430] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 06:53:56 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609236.4051] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 06:53:56 anarchy NetworkManager[343]: <info>  [1518609236.4051] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 06:53:56 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609236.4063] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 06:53:56 anarchy NetworkManager[343]: <info>  [1518609236.4068] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 06:53:56 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:56 anarchy NetworkManager[343]: <info>  [1518609236.6306] device (wlp0s26u1u4): set-hw-addr: set MAC address to 42:EB:AA:D6:DC:74 (scanning)
Feb 14 06:53:56 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 42:eb:aa:d6:dc:74
Feb 14 06:53:56 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:53:56 anarchy NetworkManager[343]: <info>  [1518609236.6511] device (wlp0s26u1u4): supplicant interface state: disconnected -> disabled
Feb 14 06:53:56 anarchy NetworkManager[343]: <info>  [1518609236.6612] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:53:56 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 06:58:09 anarchy sudo[2603]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/pacman -S dhclient[0m
Feb 14 06:58:09 anarchy sudo[2603]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 06:58:37 anarchy sudo[2603]: pam_unix(sudo:session): session closed for user root
Feb 14 06:59:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 32:c4:8a:13:31:04
Feb 14 06:59:38 anarchy NetworkManager[343]: <info>  [1518609578.6409] device (wlp0s26u1u4): set-hw-addr: set MAC address to 32:C4:8A:13:31:04 (scanning)
Feb 14 06:59:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 06:59:38 anarchy NetworkManager[343]: <info>  [1518609578.6584] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 06:59:38 anarchy NetworkManager[343]: <info>  [1518609578.6702] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 06:59:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:00:09 anarchy sudo[3382]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nano /etc/NetworkManager/conf.d/dhcp-client.conf[0m
Feb 14 07:00:09 anarchy sudo[3382]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:00:20 anarchy sudo[3382]: pam_unix(sudo:session): session closed for user root
Feb 14 07:00:42 anarchy sudo[3582]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nano /etc/NetworkManager/conf.d/dhcp-client.conf[0m
Feb 14 07:00:42 anarchy sudo[3582]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:01:02 anarchy sudo[3582]: pam_unix(sudo:session): session closed for user root
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.3308] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.3311] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.3313] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5243] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:01:13 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5428] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5436] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5447] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5448] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5450] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5518] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5522] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5527] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5527] Config: added 'ssid' value 'dlink'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5527] Config: added 'scan_ssid' value '1'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5527] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5527] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5528] Config: added 'psk' value '<hidden>'
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5588] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:13 anarchy NetworkManager[343]: <info>  [1518609673.5700] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:01:14 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:14 anarchy NetworkManager[343]: <info>  [1518609674.7622] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:14 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:15 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:15 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:01:15 anarchy NetworkManager[343]: <info>  [1518609675.4055] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:01:25 anarchy NetworkManager[343]: <info>  [1518609685.4114] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:01:26 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:01:26 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:26 anarchy NetworkManager[343]: <info>  [1518609686.6020] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:26 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:27 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:27 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:01:27 anarchy NetworkManager[343]: <info>  [1518609687.2479] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:01:37 anarchy NetworkManager[343]: <info>  [1518609697.2560] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:01:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609698.4056] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:01:38 anarchy NetworkManager[343]: <info>  [1518609698.4057] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:01:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609698.4066] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:01:38 anarchy NetworkManager[343]: <info>  [1518609698.4072] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: d6:f5:fd:34:e8:e3
Feb 14 07:01:38 anarchy NetworkManager[343]: <info>  [1518609698.6291] device (wlp0s26u1u4): set-hw-addr: set MAC address to D6:F5:FD:34:E8:E3 (scanning)
Feb 14 07:01:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:38 anarchy NetworkManager[343]: <info>  [1518609698.6499] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:01:38 anarchy NetworkManager[343]: <info>  [1518609698.6588] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.0949] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.0952] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.0954] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2526] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:01:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2701] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2705] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2709] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2710] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2711] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2757] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2761] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2768] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2768] Config: added 'ssid' value 'dlink'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2769] Config: added 'scan_ssid' value '1'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2769] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2770] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2770] Config: added 'psk' value '<hidden>'
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2834] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:01:53 anarchy NetworkManager[343]: <info>  [1518609713.2982] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:01:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:01:54 anarchy NetworkManager[343]: <info>  [1518609714.4911] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:01:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:01:55 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:01:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:01:55 anarchy NetworkManager[343]: <info>  [1518609715.1318] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:02:05 anarchy NetworkManager[343]: <info>  [1518609725.1378] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:02:06 anarchy NetworkManager[343]: <info>  [1518609726.3302] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:02:06 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:02:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:02:06 anarchy NetworkManager[343]: <info>  [1518609726.9708] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:02:16 anarchy NetworkManager[343]: <info>  [1518609736.9786] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:02:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609738.4046] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:02:18 anarchy NetworkManager[343]: <info>  [1518609738.4046] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:02:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609738.4054] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:02:18 anarchy NetworkManager[343]: <info>  [1518609738.4060] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:02:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:02:18 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ba:5b:63:f4:2f:0f
Feb 14 07:02:18 anarchy NetworkManager[343]: <info>  [1518609738.6156] device (wlp0s26u1u4): set-hw-addr: set MAC address to BA:5B:63:F4:2F:0F (scanning)
Feb 14 07:02:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:02:18 anarchy NetworkManager[343]: <info>  [1518609738.6358] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:02:18 anarchy NetworkManager[343]: <info>  [1518609738.6551] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:02:18 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:02:36 anarchy sudo[4279]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/pacman -S network-manager-applet[0m
Feb 14 07:02:36 anarchy sudo[4279]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:02:49 anarchy sudo[4279]: pam_unix(sudo:session): session closed for user root
Feb 14 07:03:28 anarchy sudo[4631]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi connect dlink password mcsd3911[0m
Feb 14 07:03:28 anarchy sudo[4631]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.3662] keyfile: add connection in-memory (ffa993b9-5052-4c65-962c-f0873843b81a,"dlink 1")
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.3676] device (wlp0s26u1u4): Activation: starting connection 'dlink 1' (ffa993b9-5052-4c65-962c-f0873843b81a)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.3772] settings-connection[0x558152c47e00,ffa993b9-5052-4c65-962c-f0873843b81a]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink 1 (ffa993b9-5052-4c65-962c-f0873843b81a,"dlink 1") and persist connection)
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.3773] audit: op="connection-add-activate" uuid="ffa993b9-5052-4c65-962c-f0873843b81a" name="dlink 1" pid=4632 uid=0 result="success"
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.3863] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5802] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:03:28 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5984] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5987] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5992] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink 1' has security, but secrets are required.
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5992] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.5993] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6030] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6033] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6036] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink 1' has security, and secrets exist.  No new secrets needed.
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6036] Config: added 'ssid' value 'dlink'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6037] Config: added 'scan_ssid' value '1'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6037] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6037] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6037] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6037] Config: added 'psk' value '<hidden>'
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6108] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:03:28 anarchy NetworkManager[343]: <info>  [1518609808.6252] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:03:29 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:03:29 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:03:29 anarchy NetworkManager[343]: <info>  [1518609809.8179] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:03:29 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:03:30 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:03:30 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:03:30 anarchy NetworkManager[343]: <info>  [1518609810.4600] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:03:40 anarchy NetworkManager[343]: <info>  [1518609820.4608] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:03:41 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:03:41 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:03:41 anarchy NetworkManager[343]: <info>  [1518609821.6579] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:03:41 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:03:42 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:03:42 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:03:42 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:03:42 anarchy NetworkManager[343]: <info>  [1518609822.2991] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:03:52 anarchy NetworkManager[343]: <info>  [1518609832.3021] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:03:53 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609833.4058] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:03:53 anarchy NetworkManager[343]: <info>  [1518609833.4058] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:03:53 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609833.4068] device (wlp0s26u1u4): Activation: failed for connection 'dlink 1'[0m
Feb 14 07:03:53 anarchy sudo[4631]: pam_unix(sudo:session): session closed for user root
Feb 14 07:03:53 anarchy NetworkManager[343]: <info>  [1518609833.4566] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:03:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:53 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2e:44:2c:1d:2d:73
Feb 14 07:03:53 anarchy NetworkManager[343]: <info>  [1518609833.6838] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2E:44:2C:1D:2D:73 (scanning)
Feb 14 07:03:53 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:03:53 anarchy NetworkManager[343]: <info>  [1518609833.7036] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:03:53 anarchy NetworkManager[343]: <info>  [1518609833.7191] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:03:53 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.1520] device (wlp0s26u1u4): Activation: starting connection 'dlink' (22a54532-4b29-49e5-9fc1-aadeac7026b0)
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.1521] audit: op="connection-activate" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.1523] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2736] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:04:08 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2939] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2946] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2956] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2957] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.2960] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3027] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3031] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] Config: added 'ssid' value 'dlink'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] Config: added 'scan_ssid' value '1'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3036] Config: added 'psk' value '<hidden>'
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3048] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:08 anarchy NetworkManager[343]: <info>  [1518609848.3155] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:04:09 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:09 anarchy NetworkManager[343]: <info>  [1518609849.5068] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:09 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:10 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:10 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:04:10 anarchy NetworkManager[343]: <info>  [1518609850.1486] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:14 anarchy NetworkManager[343]: <info>  [1518609854.8343] device (wlp0s26u1u4): state change: config -> deactivating (reason 'connection-removed', sys-iface-state: 'managed')
Feb 14 07:04:14 anarchy NetworkManager[343]: <info>  [1518609854.8701] audit: op="connection-delete" uuid="22a54532-4b29-49e5-9fc1-aadeac7026b0" name="dlink" pid=4893 uid=1000 result="success"
Feb 14 07:04:14 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:14 anarchy NetworkManager[343]: <info>  [1518609854.8710] device (wlp0s26u1u4): state change: deactivating -> disconnected (reason 'connection-removed', sys-iface-state: 'managed')
Feb 14 07:04:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 9a:b8:dc:3b:f5:c6
Feb 14 07:04:15 anarchy NetworkManager[343]: <info>  [1518609855.0548] device (wlp0s26u1u4): set-hw-addr: set MAC address to 9A:B8:DC:3B:F5:C6 (scanning)
Feb 14 07:04:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:15 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.2' (uid=0 pid=343 comm="/usr/bin/NetworkManager --no-daemon ")
Feb 14 07:04:15 anarchy systemd[1]: Starting Network Manager Script Dispatcher Service...
-- Subject: Unit NetworkManager-dispatcher.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit NetworkManager-dispatcher.service has begun starting up.
Feb 14 07:04:15 anarchy NetworkManager[343]: <info>  [1518609855.0760] device (wlp0s26u1u4): supplicant interface state: disconnected -> disabled
Feb 14 07:04:15 anarchy NetworkManager[343]: <info>  [1518609855.0809] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:04:15 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 14 07:04:15 anarchy systemd[1]: Started Network Manager Script Dispatcher Service.
-- Subject: Unit NetworkManager-dispatcher.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit NetworkManager-dispatcher.service has finished starting up.
-- 
-- The start-up result is RESULT.
Feb 14 07:04:15 anarchy nm-dispatcher[4921]: req:1 'down' [wlp0s26u1u4]: new request (0 scripts)
Feb 14 07:04:15 anarchy nm-dispatcher[4921]: req:1 'down' [wlp0s26u1u4]: completed: no scripts
Feb 14 07:04:18 anarchy NetworkManager[343]: <info>  [1518609858.0039] audit: op="connection-delete" uuid="52e48116-835f-479f-b388-de6ea4f0ad25" name="MCSD20" pid=4893 uid=1000 result="success"
Feb 14 07:04:19 anarchy NetworkManager[343]: <info>  [1518609859.8797] audit: op="connection-delete" uuid="ffa993b9-5052-4c65-962c-f0873843b81a" name="dlink 1" pid=4893 uid=1000 result="success"
Feb 14 07:04:26 anarchy sudo[5002]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi connect dlink password mcsd3911[0m
Feb 14 07:04:26 anarchy sudo[5002]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info>  [1518609866.9608] keyfile: add connection in-memory (a667c33b-3ff0-4796-a2da-fcee36b79e50,"dlink")
Feb 14 07:04:26 anarchy NetworkManager[343]: <info>  [1518609866.9622] device (wlp0s26u1u4): Activation: starting connection 'dlink' (a667c33b-3ff0-4796-a2da-fcee36b79e50)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info>  [1518609866.9791] settings-connection[0x558152c47e00,a667c33b-3ff0-4796-a2da-fcee36b79e50]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink (a667c33b-3ff0-4796-a2da-fcee36b79e50,"dlink") and persist connection)
Feb 14 07:04:26 anarchy NetworkManager[343]: <info>  [1518609866.9793] audit: op="connection-add-activate" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=5003 uid=0 result="success"
Feb 14 07:04:26 anarchy NetworkManager[343]: <info>  [1518609866.9884] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1127] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:04:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1342] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1349] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1354] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1354] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1355] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1437] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1441] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1444] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1452] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1453] Config: added 'ssid' value 'dlink'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1454] Config: added 'scan_ssid' value '1'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1454] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1454] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1454] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1455] Config: added 'psk' value '<hidden>'
Feb 14 07:04:27 anarchy NetworkManager[343]: <info>  [1518609867.1573] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:04:28 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:28 anarchy NetworkManager[343]: <info>  [1518609868.3561] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:28 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:28 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:04:29 anarchy NetworkManager[343]: <info>  [1518609869.0048] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:39 anarchy NetworkManager[343]: <info>  [1518609879.0142] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:04:40 anarchy NetworkManager[343]: <info>  [1518609880.2101] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:04:40 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:04:40 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:04:40 anarchy NetworkManager[343]: <info>  [1518609880.8517] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:04:50 anarchy NetworkManager[343]: <info>  [1518609890.8535] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:04:52 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609892.4043] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:04:52 anarchy NetworkManager[343]: <info>  [1518609892.4044] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:04:52 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518609892.4054] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:04:52 anarchy sudo[5002]: pam_unix(sudo:session): session closed for user root
Feb 14 07:04:52 anarchy NetworkManager[343]: <info>  [1518609892.4470] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:04:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:52 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c6:5f:c8:0b:3e:25
Feb 14 07:04:52 anarchy NetworkManager[343]: <info>  [1518609892.6677] device (wlp0s26u1u4): set-hw-addr: set MAC address to C6:5F:C8:0B:3E:25 (scanning)
Feb 14 07:04:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:04:52 anarchy NetworkManager[343]: <info>  [1518609892.6864] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:04:52 anarchy NetworkManager[343]: <info>  [1518609892.7034] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:04:52 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:08:43 anarchy sudo[6610]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev status[0m
Feb 14 07:08:43 anarchy sudo[6610]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:08:43 anarchy sudo[6610]: pam_unix(sudo:session): session closed for user root
Feb 14 07:09:02 anarchy sudo[6724]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli dev wifi list[0m
Feb 14 07:09:02 anarchy sudo[6724]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:09:02 anarchy sudo[6724]: pam_unix(sudo:session): session closed for user root
Feb 14 07:10:34 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 6e:f5:49:77:c7:12
Feb 14 07:10:34 anarchy NetworkManager[343]: <info>  [1518610234.6505] device (wlp0s26u1u4): set-hw-addr: set MAC address to 6E:F5:49:77:C7:12 (scanning)
Feb 14 07:10:34 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:10:34 anarchy NetworkManager[343]: <info>  [1518610234.6685] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:10:34 anarchy NetworkManager[343]: <info>  [1518610234.6909] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:10:34 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:10:57 anarchy sudo[7425]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con add con-name dlink_profile ifname wlp0s26u1u4 type wifi ssid dlink[0m
Feb 14 07:10:57 anarchy sudo[7425]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:10:57 anarchy NetworkManager[343]: <info>  [1518610257.4844] keyfile: add connection /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile")
Feb 14 07:10:57 anarchy NetworkManager[343]: <info>  [1518610257.4851] audit: op="connection-add" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=7426 uid=0 result="success"
Feb 14 07:10:57 anarchy sudo[7425]: pam_unix(sudo:session): session closed for user root
Feb 14 07:11:42 anarchy sudo[7703]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con modify dlink_profile wifi-sec.key-mgmt wpa-psk[0m
Feb 14 07:11:42 anarchy sudo[7703]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.0845] settings-connection[0x558152c47c40,8e0c1cac-0879-4d82-a7cb-c470f3184bcb]: write: successfully updated (keyfile: update /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile"))
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.0856] audit: op="connection-update" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" args="802-11-wireless-security.key-mgmt" pid=7704 uid=0 result="success"
Feb 14 07:11:42 anarchy sudo[7703]: pam_unix(sudo:session): session closed for user root
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.0906] policy: auto-activating connection 'dlink_profile'
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.0914] device (wlp0s26u1u4): Activation: starting connection 'dlink_profile' (8e0c1cac-0879-4d82-a7cb-c470f3184bcb)
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.0916] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2677] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:11:42 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2857] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2863] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2875] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink_profile' has security, but secrets are required.
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2875] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.2878] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:11:42 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610302.2961] device (wlp0s26u1u4): No agents were available for this request.[0m
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.3040] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:11:42 anarchy NetworkManager[343]: <info>  [1518610302.3098] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:12:12 anarchy NetworkManager[343]: <info>  [1518610332.4039] device (wlp0s26u1u4): state change: need-auth -> failed (reason 'no-secrets', sys-iface-state: 'managed')
Feb 14 07:12:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610332.4047] device (wlp0s26u1u4): Activation: failed for connection 'dlink_profile'[0m
Feb 14 07:12:12 anarchy NetworkManager[343]: <info>  [1518610332.4432] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 12:2d:58:f3:f0:7a
Feb 14 07:12:12 anarchy NetworkManager[343]: <info>  [1518610332.6775] device (wlp0s26u1u4): set-hw-addr: set MAC address to 12:2D:58:F3:F0:7A (scanning)
Feb 14 07:12:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:12 anarchy NetworkManager[343]: <info>  [1518610332.6967] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:12:12 anarchy NetworkManager[343]: <info>  [1518610332.7162] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:12:12 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:12:24 anarchy sudo[7971]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli con modify dlink_profile wifi-sec.psk mcsd3911[0m
Feb 14 07:12:24 anarchy sudo[7971]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:12:24 anarchy NetworkManager[343]: <info>  [1518610344.3695] settings-connection[0x558152c47c40,8e0c1cac-0879-4d82-a7cb-c470f3184bcb]: write: successfully updated (keyfile: update /etc/NetworkManager/system-connections/dlink_profile (8e0c1cac-0879-4d82-a7cb-c470f3184bcb,"dlink_profile"))
Feb 14 07:12:24 anarchy NetworkManager[343]: <info>  [1518610344.3708] audit: op="connection-update" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" args="802-11-wireless-security.psk" pid=7972 uid=0 result="success"
Feb 14 07:12:24 anarchy sudo[7971]: pam_unix(sudo:session): session closed for user root
Feb 14 07:12:47 anarchy sudo[8205]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli connection up dlink_profile[0m
Feb 14 07:12:47 anarchy sudo[8205]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.2447] device (wlp0s26u1u4): Activation: starting connection 'dlink_profile' (8e0c1cac-0879-4d82-a7cb-c470f3184bcb)
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.2448] audit: op="connection-activate" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=8206 uid=0 result="success"
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.2450] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4158] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:12:47 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4360] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4365] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4372] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink_profile' has security, but secrets are required.
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4374] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4376] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4484] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4486] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4489] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4499] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink_profile' has security, and secrets exist.  No new secrets needed.
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4500] Config: added 'ssid' value 'dlink'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4500] Config: added 'scan_ssid' value '1'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4500] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4500] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4500] Config: added 'psk' value '<hidden>'
Feb 14 07:12:47 anarchy NetworkManager[343]: <info>  [1518610367.4505] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:12:48 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:12:48 anarchy NetworkManager[343]: <info>  [1518610368.6504] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:12:48 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:12:49 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:12:49 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:12:49 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:12:49 anarchy NetworkManager[343]: <info>  [1518610369.2905] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:12:59 anarchy NetworkManager[343]: <info>  [1518610379.3002] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:13:00 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:13:00 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:13:00 anarchy NetworkManager[343]: <info>  [1518610380.4901] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:13:00 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:13:01 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:13:01 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:13:01 anarchy NetworkManager[343]: <info>  [1518610381.1311] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:13:11 anarchy NetworkManager[343]: <info>  [1518610391.1321] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:13:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610392.4041] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:13:12 anarchy NetworkManager[343]: <info>  [1518610392.4041] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:13:12 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610392.4049] device (wlp0s26u1u4): Activation: failed for connection 'dlink_profile'[0m
Feb 14 07:13:12 anarchy NetworkManager[343]: <info>  [1518610392.4055] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:13:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:13:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 36:a2:89:57:0b:3a
Feb 14 07:13:12 anarchy NetworkManager[343]: <info>  [1518610392.6441] device (wlp0s26u1u4): set-hw-addr: set MAC address to 36:A2:89:57:0B:3A (scanning)
Feb 14 07:13:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:13:12 anarchy sudo[8205]: pam_unix(sudo:session): session closed for user root
Feb 14 07:13:12 anarchy NetworkManager[343]: <info>  [1518610392.6655] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:13:12 anarchy NetworkManager[343]: <info>  [1518610392.6753] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:13:12 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:13:33 anarchy sudo[8498]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli -p c[0m
Feb 14 07:13:33 anarchy sudo[8498]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:15:47 anarchy sudo[8498]: pam_unix(sudo:session): session closed for user root
Feb 14 07:15:52 anarchy sudo[9342]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/nmcli connection up dlink[0m
Feb 14 07:15:52 anarchy sudo[9342]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.5735] device (wlp0s26u1u4): Activation: starting connection 'dlink' (a667c33b-3ff0-4796-a2da-fcee36b79e50)
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.5737] audit: op="connection-activate" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=9343 uid=0 result="success"
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.5739] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8140] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:15:52 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:15:52 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8317] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8323] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8335] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8335] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8336] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8413] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8422] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8430] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink' has security, and secrets exist.  No new secrets needed.
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8431] Config: added 'ssid' value 'dlink'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8431] Config: added 'scan_ssid' value '1'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8431] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8431] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8431] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8432] Config: added 'psk' value '<hidden>'
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8443] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:15:52 anarchy NetworkManager[343]: <info>  [1518610552.8554] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:15:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:15:54 anarchy NetworkManager[343]: <info>  [1518610554.0509] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:15:54 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:15:54 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:15:54 anarchy NetworkManager[343]: <info>  [1518610554.6919] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:16:04 anarchy NetworkManager[343]: <info>  [1518610564.6967] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:16:05 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:16:05 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:16:05 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:16:05 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:16:05 anarchy NetworkManager[343]: <info>  [1518610565.8899] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:16:06 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:16:06 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:16:06 anarchy NetworkManager[343]: <info>  [1518610566.5328] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:16:16 anarchy NetworkManager[343]: <info>  [1518610576.5365] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:16:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610578.4047] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:16:18 anarchy NetworkManager[343]: <info>  [1518610578.4048] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:16:18 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518610578.4056] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:16:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:16:18 anarchy NetworkManager[343]: <info>  [1518610578.4061] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:16:18 anarchy NetworkManager[343]: <info>  [1518610578.6209] device (wlp0s26u1u4): set-hw-addr: set MAC address to 4E:32:7F:5E:BE:6A (scanning)
Feb 14 07:16:18 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 4e:32:7f:5e:be:6a
Feb 14 07:16:18 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:16:18 anarchy sudo[9342]: pam_unix(sudo:session): session closed for user root
Feb 14 07:16:18 anarchy NetworkManager[343]: <info>  [1518610578.6432] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:16:18 anarchy NetworkManager[343]: <info>  [1518610578.6510] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:16:18 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:21:59 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 06:4e:09:53:16:78
Feb 14 07:21:59 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:21:59 anarchy NetworkManager[343]: <info>  [1518610919.6208] device (wlp0s26u1u4): set-hw-addr: set MAC address to 06:4E:09:53:16:78 (scanning)
Feb 14 07:21:59 anarchy NetworkManager[343]: <info>  [1518610919.6389] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:21:59 anarchy NetworkManager[343]: <info>  [1518610919.6589] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:21:59 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:27:15 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 1e:76:25:21:f2:5c
Feb 14 07:27:15 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:27:15 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:27:15 anarchy NetworkManager[343]: <info>  [1518611235.6474] device (wlp0s26u1u4): set-hw-addr: set MAC address to 1E:76:25:21:F2:5C (scanning)
Feb 14 07:27:15 anarchy NetworkManager[343]: <info>  [1518611235.6661] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:27:15 anarchy NetworkManager[343]: <info>  [1518611235.6876] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:28:08 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mRegistered Authentication Agent for unix-process:13846:16516984 (system bus name :1.1029 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)[0m
Feb 14 07:28:13 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.systemd1.manage-unit-files for system-bus-name::1.1030 [systemctl disable dhcpcd.service] (owned by unix-user:woodani)[0m
Feb 14 07:28:20 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mOperator of unix-session:c2 successfully authenticated as unix-user:woodani to gain TEMPORARY authorization for action org.freedesktop.systemd1.reload-daemon for system-bus-name::1.1030 [systemctl disable dhcpcd.service] (owned by unix-user:woodani)[0m
Feb 14 07:28:20 anarchy systemd[1]: Reloading.
Feb 14 07:28:20 anarchy polkitd[382]: [0;1;39m[0;1;31m[0;1;39mUnregistered Authentication Agent for unix-process:13846:16516984 (system bus name :1.1029, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)[0m
Feb 14 07:28:58 anarchy NetworkManager[343]: <info>  [1518611338.7667] audit: op="connection-delete" uuid="a667c33b-3ff0-4796-a2da-fcee36b79e50" name="dlink" pid=14129 uid=1000 result="success"
Feb 14 07:29:01 anarchy NetworkManager[343]: <info>  [1518611341.9593] audit: op="connection-delete" uuid="8e0c1cac-0879-4d82-a7cb-c470f3184bcb" name="dlink_profile" pid=14129 uid=1000 result="success"
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.5871] keyfile: add connection in-memory (1e48ae96-9e86-415d-bd8f-e4833bf90049,"dlink")
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.5888] device (wlp0s26u1u4): Activation: starting connection 'dlink' (1e48ae96-9e86-415d-bd8f-e4833bf90049)
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.6094] settings-connection[0x558152c47b60,1e48ae96-9e86-415d-bd8f-e4833bf90049]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink (1e48ae96-9e86-415d-bd8f-e4833bf90049,"dlink") and persist connection)
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.6095] audit: op="connection-add-activate" uuid="1e48ae96-9e86-415d-bd8f-e4833bf90049" name="dlink" pid=654 uid=1000 result="success"
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.6175] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8369] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:29:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8551] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8552] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8555] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink' has security, but secrets are required.
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8555] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8556] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:29:07 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518611347.8626] device (wlp0s26u1u4): No agents were available for this request.[0m
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8669] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:29:07 anarchy NetworkManager[343]: <info>  [1518611347.8725] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:29:38 anarchy NetworkManager[343]: <info>  [1518611378.4047] device (wlp0s26u1u4): state change: need-auth -> failed (reason 'no-secrets', sys-iface-state: 'managed')
Feb 14 07:29:38 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518611378.4055] device (wlp0s26u1u4): Activation: failed for connection 'dlink'[0m
Feb 14 07:29:38 anarchy NetworkManager[343]: <info>  [1518611378.4366] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:29:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:38 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ce:1a:50:3e:0e:74
Feb 14 07:29:38 anarchy NetworkManager[343]: <info>  [1518611378.6609] device (wlp0s26u1u4): set-hw-addr: set MAC address to CE:1A:50:3E:0E:74 (scanning)
Feb 14 07:29:38 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:29:38 anarchy NetworkManager[343]: <info>  [1518611378.6828] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:29:38 anarchy NetworkManager[343]: <info>  [1518611378.6908] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:29:38 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.0655] keyfile: add connection in-memory (8eee3a3f-4220-4125-b301-0968d98a9184,"dlink 1")
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.0672] device (wlp0s26u1u4): Activation: starting connection 'dlink 1' (8eee3a3f-4220-4125-b301-0968d98a9184)
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.0770] settings-connection[0x558152c47c40,8eee3a3f-4220-4125-b301-0968d98a9184]: write: successfully commited (keyfile: update /etc/NetworkManager/system-connections/dlink 1 (8eee3a3f-4220-4125-b301-0968d98a9184,"dlink 1") and persist connection)
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.0771] audit: op="connection-add-activate" uuid="8eee3a3f-4220-4125-b301-0968d98a9184" name="dlink 1" pid=14637 uid=1000 result="success"
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.0873] device (wlp0s26u1u4): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c0:25:e9:14:36:9c
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2523] device (wlp0s26u1u4): set-hw-addr: reset MAC address to C0:25:E9:14:36:9C (preserve)
Feb 14 07:30:12 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2722] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2728] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2740] device (wlp0s26u1u4): Activation: (wifi) access point 'dlink 1' has security, but secrets are required.
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2740] device (wlp0s26u1u4): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2743] sup-iface[0x558152c4f6f0,wlp0s26u1u4]: wps: type pbc start...
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2882] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2884] device (wlp0s26u1u4): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2888] device (wlp0s26u1u4): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2892] device (wlp0s26u1u4): Activation: (wifi) connection 'dlink 1' has security, and secrets exist.  No new secrets needed.
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2892] Config: added 'ssid' value 'dlink'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2892] Config: added 'scan_ssid' value '1'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2892] Config: added 'bgscan' value 'simple:30:-80:86400'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2892] Config: added 'key_mgmt' value 'WPA-PSK'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2893] Config: added 'auth_alg' value 'OPEN'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.2893] Config: added 'psk' value '<hidden>'
Feb 14 07:30:12 anarchy NetworkManager[343]: <info>  [1518611412.3027] device (wlp0s26u1u4): supplicant interface state: inactive -> scanning
Feb 14 07:30:13 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:30:13 anarchy NetworkManager[343]: <info>  [1518611413.4984] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:30:13 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:30:14 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:30:14 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=1 duration=10 reason=CONN_FAILED
Feb 14 07:30:14 anarchy NetworkManager[343]: <info>  [1518611414.1400] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:30:24 anarchy NetworkManager[343]: <info>  [1518611424.1438] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="dlink"
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: authenticate with ec:08:6b:72:3a:2c
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: SME: Trying to authenticate with ec:08:6b:72:3a:2c (SSID='dlink' freq=2417 MHz)
Feb 14 07:30:25 anarchy NetworkManager[343]: <info>  [1518611425.3379] device (wlp0s26u1u4): supplicant interface state: scanning -> authenticating
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 1/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 2/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: send auth to ec:08:6b:72:3a:2c (try 3/3)
Feb 14 07:30:25 anarchy kernel: wlp0s26u1u4: authentication with ec:08:6b:72:3a:2c timed out
Feb 14 07:30:25 anarchy wpa_supplicant[381]: wlp0s26u1u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="dlink" auth_failures=2 duration=20 reason=CONN_FAILED
Feb 14 07:30:25 anarchy NetworkManager[343]: <info>  [1518611425.9785] device (wlp0s26u1u4): supplicant interface state: authenticating -> disconnected
Feb 14 07:30:35 anarchy NetworkManager[343]: <info>  [1518611435.9844] device (wlp0s26u1u4): supplicant interface state: disconnected -> scanning
Feb 14 07:30:37 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518611437.4047] device (wlp0s26u1u4): Activation: (wifi) association took too long, failing activation[0m
Feb 14 07:30:37 anarchy NetworkManager[343]: <info>  [1518611437.4048] device (wlp0s26u1u4): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
Feb 14 07:30:37 anarchy NetworkManager[343]: [0;1;39m[0;1;31m[0;1;39m<warn>  [1518611437.4061] device (wlp0s26u1u4): Activation: failed for connection 'dlink 1'[0m
Feb 14 07:30:37 anarchy NetworkManager[343]: <info>  [1518611437.4348] device (wlp0s26u1u4): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
Feb 14 07:30:37 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:37 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 2e:8b:d1:7f:14:61
Feb 14 07:30:37 anarchy NetworkManager[343]: <info>  [1518611437.6614] device (wlp0s26u1u4): set-hw-addr: set MAC address to 2E:8B:D1:7F:14:61 (scanning)
Feb 14 07:30:37 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:30:37 anarchy NetworkManager[343]: <info>  [1518611437.6799] device (wlp0s26u1u4): supplicant interface state: scanning -> disabled
Feb 14 07:30:37 anarchy NetworkManager[343]: <info>  [1518611437.6922] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:30:37 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:33:05 anarchy NetworkManager[343]: <info>  [1518611585.2993] audit: op="connection-delete" uuid="8eee3a3f-4220-4125-b301-0968d98a9184" name="dlink 1" pid=14129 uid=1000 result="success"
Feb 14 07:33:07 anarchy NetworkManager[343]: <info>  [1518611587.9424] audit: op="connection-delete" uuid="1e48ae96-9e86-415d-bd8f-e4833bf90049" name="dlink" pid=14129 uid=1000 result="success"
Feb 14 07:36:19 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ba:11:6c:8e:15:42
Feb 14 07:36:19 anarchy NetworkManager[343]: <info>  [1518611779.6911] device (wlp0s26u1u4): set-hw-addr: set MAC address to BA:11:6C:8E:15:42 (scanning)
Feb 14 07:36:19 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:36:19 anarchy NetworkManager[343]: <info>  [1518611779.7119] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:36:19 anarchy NetworkManager[343]: <info>  [1518611779.7272] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:36:19 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:41:35 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:0f:81:5d:b5:0b
Feb 14 07:41:35 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:41:35 anarchy NetworkManager[343]: <info>  [1518612095.6465] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:0F:81:5D:B5:0B (scanning)
Feb 14 07:41:35 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:41:35 anarchy NetworkManager[343]: <info>  [1518612095.6647] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:41:35 anarchy NetworkManager[343]: <info>  [1518612095.6768] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:46:51 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 3a:16:ae:1e:06:37
Feb 14 07:46:51 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:46:51 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:46:51 anarchy NetworkManager[343]: <info>  [1518612411.6285] device (wlp0s26u1u4): set-hw-addr: set MAC address to 3A:16:AE:1E:06:37 (scanning)
Feb 14 07:46:51 anarchy NetworkManager[343]: <info>  [1518612411.6471] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:46:51 anarchy NetworkManager[343]: <info>  [1518612411.6642] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:52:07 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:e2:c8:72:62:51
Feb 14 07:52:07 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:52:07 anarchy NetworkManager[343]: <info>  [1518612727.6161] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:E2:C8:72:62:51 (scanning)
Feb 14 07:52:07 anarchy NetworkManager[343]: <info>  [1518612727.6340] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:52:07 anarchy NetworkManager[343]: <info>  [1518612727.6549] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 07:52:07 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:57:23 anarchy NetworkManager[343]: <info>  [1518613043.6344] device (wlp0s26u1u4): set-hw-addr: set MAC address to C2:31:1B:31:64:9D (scanning)
Feb 14 07:57:23 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 07:57:23 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 07:57:23 anarchy NetworkManager[343]: <info>  [1518613043.6536] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 07:57:23 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: c2:31:1b:31:64:9d
Feb 14 07:57:23 anarchy NetworkManager[343]: <info>  [1518613043.6703] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:02:39 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: da:90:d6:cf:c5:92
Feb 14 08:02:39 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:02:39 anarchy NetworkManager[343]: <info>  [1518613359.6289] device (wlp0s26u1u4): set-hw-addr: set MAC address to DA:90:D6:CF:C5:92 (scanning)
Feb 14 08:02:39 anarchy NetworkManager[343]: <info>  [1518613359.6497] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:02:39 anarchy NetworkManager[343]: <info>  [1518613359.6618] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:02:39 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:07:55 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ea:9e:72:d6:06:3d
Feb 14 08:07:55 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:07:55 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:07:55 anarchy NetworkManager[343]: <info>  [1518613675.6867] device (wlp0s26u1u4): set-hw-addr: set MAC address to EA:9E:72:D6:06:3D (scanning)
Feb 14 08:07:55 anarchy NetworkManager[343]: <info>  [1518613675.7051] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:07:55 anarchy NetworkManager[343]: <info>  [1518613675.7231] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:08:56 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1189' (uid=1000 pid=15937 comm="/usr/lib/libreoffice/program/soffice.bin --writer ")
Feb 14 08:08:56 anarchy systemd[1]: Starting Hostname Service...
-- Subject: Unit systemd-hostnamed.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has begun starting up.
Feb 14 08:08:56 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.hostname1'
Feb 14 08:08:56 anarchy systemd[1]: Started Hostname Service.
-- Subject: Unit systemd-hostnamed.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has finished starting up.
-- 
-- The start-up result is RESULT.
Feb 14 08:08:57 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:08:57 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service' requested by ':1.1194' (uid=1000 pid=29000 comm="/usr/lib/gvfs/gvfsd-dnssd --spawner :1.13 /org/gtk")
Feb 14 08:09:12 anarchy dbus-daemon[339]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service not found.
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:12 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:09:22 anarchy gvfsd[589]: mkdir failed on directory /var/cache/samba: Permission denied
Feb 14 08:13:04 anarchy dbus-daemon[339]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.1207' (uid=1000 pid=2207 comm="xfce4-terminal --drop-down ")
Feb 14 08:13:04 anarchy systemd[1]: Starting Hostname Service...
-- Subject: Unit systemd-hostnamed.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has begun starting up.
Feb 14 08:13:04 anarchy dbus-daemon[339]: [system] Successfully activated service 'org.freedesktop.hostname1'
Feb 14 08:13:04 anarchy systemd[1]: Started Hostname Service.
-- Subject: Unit systemd-hostnamed.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has finished starting up.
-- 
-- The start-up result is RESULT.
Feb 14 08:13:11 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: ee:90:0c:fb:47:82
Feb 14 08:13:11 anarchy NetworkManager[343]: <info>  [1518613991.6382] device (wlp0s26u1u4): set-hw-addr: set MAC address to EE:90:0C:FB:47:82 (scanning)
Feb 14 08:13:11 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:13:11 anarchy NetworkManager[343]: <info>  [1518613991.6583] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:13:11 anarchy NetworkManager[343]: <info>  [1518613991.6794] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:13:11 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:13:34 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Activating service name='org.freedesktop.thumbnails.Cache1' requested by ':1.7' (uid=1000 pid=578 comm="Thunar --sm-client-id 2fccab312-0118-4032-8d85-48b")
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy dbus-daemon[552]: [session uid=1000 pid=552] Successfully activated service 'org.freedesktop.thumbnails.Cache1'
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy org.freedesktop.thumbnails.Cache1[552]: Registered thumbailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory[0m
Feb 14 08:13:34 anarchy tumblerd[30625]: [0;1;39m[0;1;31m[0;1;39mFailed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.7: cannot open shared object file: No such file or directory[0m
Feb 14 08:18:27 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: 6e:10:b8:0a:09:82
Feb 14 08:18:27 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:18:27 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:18:27 anarchy NetworkManager[343]: <info>  [1518614307.6699] device (wlp0s26u1u4): set-hw-addr: set MAC address to 6E:10:B8:0A:09:82 (scanning)
Feb 14 08:18:27 anarchy NetworkManager[343]: <info>  [1518614307.6880] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:18:27 anarchy NetworkManager[343]: <info>  [1518614307.7011] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:23:43 anarchy dhcpcd[344]: wlp0s26u1u4: new hardware address: e6:9e:ea:02:52:cc
Feb 14 08:23:43 anarchy kernel: IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u4: link is not ready
Feb 14 08:23:43 anarchy NetworkManager[343]: <info>  [1518614623.6497] device (wlp0s26u1u4): set-hw-addr: set MAC address to E6:9E:EA:02:52:CC (scanning)
Feb 14 08:23:43 anarchy wpa_supplicant[381]: wlp0s26u1u4: Reject scan trigger since one is already pending
Feb 14 08:23:43 anarchy NetworkManager[343]: <info>  [1518614623.6677] device (wlp0s26u1u4): supplicant interface state: inactive -> disabled
Feb 14 08:23:43 anarchy NetworkManager[343]: <info>  [1518614623.6868] device (wlp0s26u1u4): supplicant interface state: disabled -> inactive
Feb 14 08:27:01 anarchy sudo[3205]: [0;1;39m[0;1;31m[0;1;39m woodani : TTY=pts/0 ; PWD=/home/woodani ; USER=root ; COMMAND=/usr/bin/journalctl -xe[0m
Feb 14 08:27:01 anarchy sudo[3205]: pam_unix(sudo:session): session opened for user root by (uid=0) 

My access point is using WPA2 encryption I belive, and it is not a hidden network.

Offline

Board footer

Powered by FluxBB