You are not logged in.
Hi,
I have a machine with a SuperMicro X10DRG motherboard, which has an Aspeed 2400 providing VGA graphics. I also have an NVidia Tesla K40 installed, but that does not have a graphics output. When lightdm-gtk-greeter launches, the graphics seem to work fine, but once I pass that screen every big screen refresh rolls down the screen and takes a second or two - ie opening a new file or scrolling in firefox. The mouse movement is fine.
My system is up to date - I'm currently using the linux-rt-lts kernel, but the issue persists in the standard Arch kernel. I have installed the nvidia-dkms driver for the Tesla GPU, and it appears the ast kernel module is my driver for the Aspeed graphics. Relevant output from lspci -k:
06:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30)
Subsystem: Super Micro Computer Inc ASPEED Graphics Family
Kernel driver in use: ast
Kernel modules: ast
Here is my xorg settings for the GPU (initially set up by the nvidia-dkms install), and log:
Section "OutputClass"
Identifier "aspeed"
Driver "ast"
EndSection
Section "OutputClass"
Identifier "nvidia"
MatchDriver "nvidia-drm"
Driver "nvidia"
Option "AllowEmptyInitialConfiguration"
ModulePath "/usr/lib/nvidia/xorg"
ModulePath "/usr/lib/xorg/modules"
EndSection
[ 8.497]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 8.497] X Protocol Version 11, Revision 0
[ 8.497] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[ 8.497] Current Operating System: Linux DDWFS 4.9.76-rt61-2-rt-lts #1 SMP PREEMPT RT Tue Feb 13 15:09:12 MST 2018 x86_64
[ 8.497] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-rt-lts root=UUID=629626db-fe4e-464d-b7dc-078082bc5282 rw
[ 8.497] Build Date: 26 January 2018 10:25:18AM
[ 8.497]
[ 8.497] Current version of pixman: 0.34.0
[ 8.497] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.497] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.497] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 14 16:52:56 2018
[ 8.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.499] (==) No Layout section. Using the first Screen section.
[ 8.499] (==) No screen section available. Using defaults.
[ 8.499] (**) |-->Screen "Default Screen Section" (0)
[ 8.499] (**) | |-->Monitor "<default monitor>"
[ 8.499] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.499] (==) Automatically adding devices
[ 8.499] (==) Automatically enabling devices
[ 8.499] (==) Automatically adding GPU devices
[ 8.499] (==) Automatically binding GPU devices
[ 8.499] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.502] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.502] Entry deleted from font path.
[ 8.502] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 8.502] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.502] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.502] (II) Loader magic: 0x56449dd3ed60
[ 8.502] (II) Module ABI versions:
[ 8.502] X.Org ANSI C Emulation: 0.4
[ 8.502] X.Org Video Driver: 23.0
[ 8.502] X.Org XInput driver : 24.1
[ 8.502] X.Org Server Extension : 10.0
[ 8.503] (++) using VT number 7
[ 8.503] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.503] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.503] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 8.513] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 8.521] (--) PCI:*(0:6:0:0) 1a03:2000:15d9:0843 rev 48, Mem @ 0xc6000000/16777216, 0xc7000000/131072, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[ 8.521] (--) PCI: (0:130:0:0) 10de:1023:10de:097e rev 161, Mem @ 0xfa000000/16777216, 0x2f800000000/17179869184, 0x2fc00000000/33554432
[ 8.521] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8.521] (II) LoadModule: "glx"
[ 8.521] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 8.559] (II) Module glx: vendor="NVIDIA Corporation"
[ 8.559] compiled for 4.0.2, module version = 1.0.0
[ 8.559] Module class: X.Org Server Extension
[ 8.559] (II) NVIDIA GLX Module 390.25 Wed Jan 24 19:23:51 PST 2018
[ 8.562] (II) Applying OutputClass "aspeed" to /dev/dri/card0
[ 8.562] loading driver: ast
[ 8.562] (II) Applying OutputClass "aspeed" to /dev/dri/card1
[ 8.562] loading driver: ast
[ 8.562] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 8.562] loading driver: nvidia
[ 8.562] (==) Matched ast as autoconfigured driver 0
[ 8.562] (==) Matched ast as autoconfigured driver 1
[ 8.562] (==) Matched ast as autoconfigured driver 2
[ 8.562] (==) Matched nvidia as autoconfigured driver 3
[ 8.562] (==) Matched nouveau as autoconfigured driver 4
[ 8.562] (==) Matched nv as autoconfigured driver 5
[ 8.562] (==) Matched ast as autoconfigured driver 6
[ 8.562] (==) Matched modesetting as autoconfigured driver 7
[ 8.562] (==) Matched fbdev as autoconfigured driver 8
[ 8.562] (==) Matched vesa as autoconfigured driver 9
[ 8.562] (==) Assigned the driver to the xf86ConfigLayout
[ 8.562] (II) LoadModule: "ast"
[ 8.563] (WW) Warning, couldn't open module ast
[ 8.563] (II) UnloadModule: "ast"
[ 8.563] (II) Unloading ast
[ 8.563] (EE) Failed to load module "ast" (module does not exist, 0)
[ 8.563] (II) LoadModule: "nvidia"
[ 8.563] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 8.570] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 8.570] compiled for 4.0.2, module version = 1.0.0
[ 8.570] Module class: X.Org Video Driver
[ 8.570] (II) LoadModule: "nouveau"
[ 8.570] (WW) Warning, couldn't open module nouveau
[ 8.570] (II) UnloadModule: "nouveau"
[ 8.570] (II) Unloading nouveau
[ 8.570] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 8.570] (II) LoadModule: "nv"
[ 8.571] (WW) Warning, couldn't open module nv
[ 8.571] (II) UnloadModule: "nv"
[ 8.571] (II) Unloading nv
[ 8.571] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.571] (II) LoadModule: "modesetting"
[ 8.571] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.571] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.571] compiled for 1.19.6, module version = 1.19.6
[ 8.571] Module class: X.Org Video Driver
[ 8.571] ABI class: X.Org Video Driver, version 23.0
[ 8.571] (II) LoadModule: "fbdev"
[ 8.572] (WW) Warning, couldn't open module fbdev
[ 8.572] (II) UnloadModule: "fbdev"
[ 8.572] (II) Unloading fbdev
[ 8.572] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.572] (II) LoadModule: "vesa"
[ 8.572] (WW) Warning, couldn't open module vesa
[ 8.572] (II) UnloadModule: "vesa"
[ 8.572] (II) Unloading vesa
[ 8.572] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.572] (II) NVIDIA dlloader X Driver 390.25 Wed Jan 24 18:57:05 PST 2018
[ 8.572] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 8.572] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.291] (II) modeset(0): using drv /dev/dri/card0
[ 10.291] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.291] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 10.291] (==) modeset(0): RGB weight 888
[ 10.291] (==) modeset(0): Default visual is TrueColor
[ 10.292] (II) Loading sub module "glamoregl"
[ 10.292] (II) LoadModule: "glamoregl"
[ 10.292] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 10.300] (II) Module glamoregl: vendor="X.Org Foundation"
[ 10.300] compiled for 1.19.6, module version = 1.0.0
[ 10.300] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.301] (II) glamor: OpenGL accelerated X.org driver based.
[ 10.437] (II) glamor: EGL version 1.4 (DRI2):
[ 10.437] EGL_MESA_drm_image required.
[ 10.437] (EE) modeset(0): glamor initialization failed
[ 10.437] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[ 10.437] (II) modeset(0): Double-buffered shadow updates: on
[ 10.515] (II) modeset(0): Output VGA-1 has no monitor section
[ 10.592] (II) modeset(0): EDID for output VGA-1
[ 10.592] (II) modeset(0): Manufacturer: HWP Model: 286b Serial#: 16843009
[ 10.592] (II) modeset(0): Year: 2011 Week: 24
[ 10.592] (II) modeset(0): EDID Version: 1.4
[ 10.592] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 10.592] (II) modeset(0): Sync: Separate
[ 10.592] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 10.592] (II) modeset(0): Gamma: 2.20
[ 10.592] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 10.592] (II) modeset(0): Default color space is primary color space
[ 10.592] (II) modeset(0): First detailed timing is preferred mode
[ 10.592] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 10.592] (II) modeset(0): redX: 0.644 redY: 0.335 greenX: 0.304 greenY: 0.613
[ 10.592] (II) modeset(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 10.592] (II) modeset(0): Supported established timings:
[ 10.592] (II) modeset(0): 640x480@60Hz
[ 10.592] (II) modeset(0): 800x600@60Hz
[ 10.592] (II) modeset(0): 1024x768@60Hz
[ 10.592] (II) modeset(0): Manufacturer's mask: 0
[ 10.592] (II) modeset(0): Supported standard timings:
[ 10.592] (II) modeset(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 10.592] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.592] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 10.592] (II) modeset(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 10.592] (II) modeset(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 10.592] (II) modeset(0): #5: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 10.592] (II) modeset(0): #6: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 10.592] (II) modeset(0): Supported detailed timing:
[ 10.592] (II) modeset(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 10.592] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 10.592] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 10.592] (II) modeset(0): Ranges: V min: 59 V max: 61 Hz, H min: 24 H max: 80 kHz, PixClock max 205 MHz
[ 10.592] (II) modeset(0): Monitor name: HP ZR24w
[ 10.592] (II) modeset(0): Serial No: CNT12470FV
[ 10.592] (II) modeset(0): EDID (in hex):
[ 10.592] (II) modeset(0): 00ffffffffffff0022f06b2801010101
[ 10.592] (II) modeset(0): 18150104683420782efc81a4554d9d25
[ 10.592] (II) modeset(0): 125054210800814081809500a940b300
[ 10.592] (II) modeset(0): d1c0d1000101283c80a070b023403020
[ 10.592] (II) modeset(0): 360006442100001a000000fd003b3d18
[ 10.592] (II) modeset(0): 5014000a202020202020000000fc0048
[ 10.592] (II) modeset(0): 50205a523234770a20202020000000ff
[ 10.592] (II) modeset(0): 00434e54313234373046560a202000b2
[ 10.592] (II) modeset(0): Printing probed modes for output VGA-1
[ 10.592] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 10.592] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[ 10.593] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 10.593] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 10.593] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.593] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 10.593] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.593] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.593] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.593] (II) modeset(0): Output VGA-1 connected
[ 10.593] (II) modeset(0): Using exact sizes for initial modes
[ 10.593] (II) modeset(0): Output VGA-1 using initial mode 1920x1200 +0+0
[ 10.593] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.593] (==) modeset(0): DPI set to (96, 96)
[ 10.593] (II) Loading sub module "fb"
[ 10.593] (II) LoadModule: "fb"
[ 10.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.595] (II) Module fb: vendor="X.Org Foundation"
[ 10.595] compiled for 1.19.6, module version = 1.0.0
[ 10.595] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.595] (II) Loading sub module "shadow"
[ 10.595] (II) LoadModule: "shadow"
[ 10.595] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 10.596] (II) Module shadow: vendor="X.Org Foundation"
[ 10.596] compiled for 1.19.6, module version = 1.1.0
[ 10.596] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.596] (==) Depth 24 pixmap format is 32 bpp
[ 10.596] (==) modeset(0): Backing store enabled
[ 10.596] (==) modeset(0): Silken mouse enabled
[ 10.596] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.596] (==) modeset(0): DPMS enabled
[ 10.596] (--) RandR disabled
[ 10.599] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 10.599] (II) modeset(0): Damage tracking initialized
[ 10.599] (II) modeset(0): Setting screen physical size to 508 x 317
[ 10.685] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.685] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.685] (II) LoadModule: "libinput"
[ 10.685] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 10.688] (II) Module libinput: vendor="X.Org Foundation"
[ 10.688] compiled for 1.19.3, module version = 0.26.0
[ 10.688] Module class: X.Org XInput Driver
[ 10.688] ABI class: X.Org XInput driver, version 24.1
[ 10.688] (II) Using input driver 'libinput' for 'Power Button'
[ 10.688] (**) Power Button: always reports core events
[ 10.688] (**) Option "Device" "/dev/input/event1"
[ 10.688] (**) Option "_source" "server/udev"
[ 10.689] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 10.689] (II) event1 - Power Button: device is a keyboard
[ 10.689] (II) event1 - Power Button: device removed
[ 10.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 10.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.757] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 10.757] (II) event1 - Power Button: device is a keyboard
[ 10.757] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 10.757] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.757] (II) Using input driver 'libinput' for 'Power Button'
[ 10.757] (**) Power Button: always reports core events
[ 10.757] (**) Option "Device" "/dev/input/event0"
[ 10.757] (**) Option "_source" "server/udev"
[ 10.758] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 10.758] (II) event0 - Power Button: device is a keyboard
[ 10.758] (II) event0 - Power Button: device removed
[ 10.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 10.786] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.787] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 10.787] (II) event0 - Power Button: device is a keyboard
[ 10.788] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event3)
[ 10.788] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.788] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[ 10.788] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 10.788] (**) Option "Device" "/dev/input/event3"
[ 10.788] (**) Option "_source" "server/udev"
[ 10.788] (II) event3 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 10.788] (II) event3 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 10.788] (II) event3 - CHICONY HP Basic USB Keyboard: device removed
[ 10.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:03F0:0024.0001/input/input3/event3"
[ 10.820] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 8)
[ 10.820] (II) event3 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 10.821] (II) event3 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 10.821] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event4)
[ 10.821] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 10.821] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[ 10.821] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 10.821] (**) Option "Device" "/dev/input/event4"
[ 10.821] (**) Option "_source" "server/udev"
[ 10.877] (II) event4 - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[ 10.877] (II) event4 - Logitech USB-PS/2 Optical Mouse: device is a pointer
[ 10.877] (II) event4 - Logitech USB-PS/2 Optical Mouse: device removed
[ 10.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C03D.0002/input/input4/event4"
[ 10.937] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 10.937] (**) Option "AccelerationScheme" "none"
[ 10.937] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[ 10.937] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 10.937] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 10.993] (II) event4 - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[ 10.993] (II) event4 - Logitech USB-PS/2 Optical Mouse: device is a pointer
[ 10.994] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 10.994] (II) No input driver specified, ignoring this device.
[ 10.994] (II) This device may have been added with another device file.
[ 10.994] (II) config/udev: Adding input device HID 0557:2419 (/dev/input/event5)
[ 10.994] (**) HID 0557:2419: Applying InputClass "libinput keyboard catchall"
[ 10.994] (II) Using input driver 'libinput' for 'HID 0557:2419'
[ 10.994] (**) HID 0557:2419: always reports core events
[ 10.994] (**) Option "Device" "/dev/input/event5"
[ 10.994] (**) Option "_source" "server/udev"
[ 10.995] (II) event5 - HID 0557:2419: is tagged by udev as: Keyboard
[ 10.995] (II) event5 - HID 0557:2419: device is a keyboard
[ 10.995] (II) event5 - HID 0557:2419: device removed
[ 11.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-14/2-14.1/2-14.1:1.0/0003:0557:2419.0003/input/input5/event5"
[ 11.046] (II) XINPUT: Adding extended input device "HID 0557:2419" (type: KEYBOARD, id 10)
[ 11.047] (II) event5 - HID 0557:2419: is tagged by udev as: Keyboard
[ 11.047] (II) event5 - HID 0557:2419: device is a keyboard
[ 11.048] (II) config/udev: Adding input device HID 0557:2419 (/dev/input/event6)
[ 11.048] (**) HID 0557:2419: Applying InputClass "libinput pointer catchall"
[ 11.048] (II) Using input driver 'libinput' for 'HID 0557:2419'
[ 11.048] (**) HID 0557:2419: always reports core events
[ 11.048] (**) Option "Device" "/dev/input/event6"
[ 11.048] (**) Option "_source" "server/udev"
[ 11.103] (II) event6 - HID 0557:2419: is tagged by udev as: Mouse
[ 11.103] (II) event6 - HID 0557:2419: device is a pointer
[ 11.103] (II) event6 - HID 0557:2419: device removed
[ 11.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-14/2-14.1/2-14.1:1.1/0003:0557:2419.0004/input/input6/event6"
[ 11.183] (II) XINPUT: Adding extended input device "HID 0557:2419" (type: MOUSE, id 11)
[ 11.183] (**) Option "AccelerationScheme" "none"
[ 11.183] (**) HID 0557:2419: (accel) selected scheme none/0
[ 11.183] (**) HID 0557:2419: (accel) acceleration factor: 2.000
[ 11.183] (**) HID 0557:2419: (accel) acceleration threshold: 4
[ 11.240] (II) event6 - HID 0557:2419: is tagged by udev as: Mouse
[ 11.240] (II) event6 - HID 0557:2419: device is a pointer
[ 11.240] (II) config/udev: Adding input device HID 0557:2419 (/dev/input/js0)
[ 11.240] (II) No input driver specified, ignoring this device.
[ 11.240] (II) This device may have been added with another device file.
[ 11.241] (II) config/udev: Adding input device HID 0557:2419 (/dev/input/mouse1)
[ 11.241] (II) No input driver specified, ignoring this device.
[ 11.241] (II) This device may have been added with another device file.
[ 11.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 11.242] (II) No input driver specified, ignoring this device.
[ 11.242] (II) This device may have been added with another device file.
[ 14.833] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 20.249] (II) modeset(0): EDID vendor "HWP", prod id 10347
[ 20.249] (II) modeset(0): Using EDID range info for horizontal sync
[ 20.249] (II) modeset(0): Using EDID range info for vertical refresh
[ 20.249] (II) modeset(0): Printing DDC gathered Modelines:
[ 20.249] (II) modeset(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 20.249] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 20.249] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 20.249] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 20.249] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 20.249] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 20.249] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 20.249] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 20.249] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 20.249] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 20.249] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 20.391] (II) modeset(0): EDID vendor "HWP", prod id 10347
[ 20.391] (II) modeset(0): Using hsync ranges from config file
[ 20.391] (II) modeset(0): Using vrefresh ranges from config file
[ 20.391] (II) modeset(0): Printing DDC gathered Modelines:
[ 20.391] (II) modeset(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 20.391] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 20.391] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 20.391] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 20.391] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 20.391] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 20.391] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 20.391] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 20.391] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 20.391] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 20.391] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
Offline
Apologies, I could have sworn this issue was present in the standard Arch kernel, but it appears to only be an issue with the RT kernel.
Offline
Not an Installation issue, moving to AUR Issues...
Offline