You are not logged in.
- Topics: Active | Unanswered
#1 2018-02-15 11:01:21
- Jasonls221
- Member
- Registered: 2018-02-15
- Posts: 5
[Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Every time I restart arch cinnamon doesn't work unless I reinstall it every time I restart, I could use gnome but I'd much rather use cinnamon.
Does anyone know how to fix this?
Last edited by Jasonls221 (2018-02-16 10:23:22)
Offline
#2 2018-02-15 12:42:25
- Batou
- Member
- Registered: 2017-01-03
- Posts: 262
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
What kernel/video driver do you use? Post a copy of your xorg conf file. Post your xorg.0.log file and dmesg output.
Please vote for all the AUR packages you're using. You can mass-vote for all of them by doing: "pacman -Qqm | xargs aurvote -v" (make sure to run "aurvote --configure" first)
Offline
#3 2018-02-15 13:03:50
- Jasonls221
- Member
- Registered: 2018-02-15
- Posts: 5
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Batou wrote:
What kernel/video driver do you use? Post a copy of your xorg conf file. Post your xorg.0.log file and dmesg output.
xorg.0.log
[ 1965.921] (--) Log file renamed from "/var/log/Xorg.pid-2677.log" to "/var/log/Xorg.0.log"
[ 1965.923]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 1965.923] X Protocol Version 11, Revision 0
[ 1965.923] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[ 1965.923] Current Operating System: Linux Anonymous 4.15.2-2-ARCH #1 SMP PREEMPT Thu Feb 8 18:54:52 UTC 2018 x86_64
[ 1965.923] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=efe6f001-a9c8-43bd-b658-6421300637bb rw quiet
[ 1965.923] Build Date: 26 January 2018 10:25:18AM
[ 1965.923]
[ 1965.923] Current version of pixman: 0.34.0
[ 1965.923] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1965.923] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1965.923] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 15 05:47:54 2018
[ 1965.924] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1965.924] (==) No Layout section. Using the first Screen section.
[ 1965.924] (==) No screen section available. Using defaults.
[ 1965.924] (**) |-->Screen "Default Screen Section" (0)
[ 1965.924] (**) | |-->Monitor "<default monitor>"
[ 1965.924] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1965.924] (==) Automatically adding devices
[ 1965.924] (==) Automatically enabling devices
[ 1965.924] (==) Automatically adding GPU devices
[ 1965.924] (==) Automatically binding GPU devices
[ 1965.924] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1965.924] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 1965.924] Entry deleted from font path.
[ 1965.924] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1965.924] Entry deleted from font path.
[ 1965.924] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1965.924] Entry deleted from font path.
[ 1965.924] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 1965.924] Entry deleted from font path.
[ 1965.924] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 1965.924] Entry deleted from font path.
[ 1965.924] (==) FontPath set to:
/usr/share/fonts/TTF/
[ 1965.924] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1965.924] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1965.924] (II) Loader magic: 0x55a3f5937d60
[ 1965.924] (II) Module ABI versions:
[ 1965.924] X.Org ANSI C Emulation: 0.4
[ 1965.924] X.Org Video Driver: 23.0
[ 1965.924] X.Org XInput driver : 24.1
[ 1965.924] X.Org Server Extension : 10.0
[ 1965.925] (++) using VT number 2
[ 1965.929] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c5
[ 1965.929] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1965.932] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 1965.935] (--) PCI:*(0:0:1:0) 1002:9990:144d:c0dd rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 1965.936] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1965.936] (II) LoadModule: "glx"
[ 1965.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1965.938] (II) Module glx: vendor="X.Org Foundation"
[ 1965.938] compiled for 1.19.6, module version = 1.0.0
[ 1965.938] ABI class: X.Org Server Extension, version 10.0
[ 1965.938] (==) Matched ati as autoconfigured driver 0
[ 1965.938] (==) Matched ati as autoconfigured driver 1
[ 1965.938] (==) Matched modesetting as autoconfigured driver 2
[ 1965.938] (==) Matched fbdev as autoconfigured driver 3
[ 1965.938] (==) Matched vesa as autoconfigured driver 4
[ 1965.938] (==) Assigned the driver to the xf86ConfigLayout
[ 1965.938] (II) LoadModule: "ati"
[ 1965.938] (WW) Warning, couldn't open module ati
[ 1965.938] (II) UnloadModule: "ati"
[ 1965.938] (II) Unloading ati
[ 1965.938] (EE) Failed to load module "ati" (module does not exist, 0)
[ 1965.938] (II) LoadModule: "modesetting"
[ 1965.938] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1965.938] (II) Module modesetting: vendor="X.Org Foundation"
[ 1965.938] compiled for 1.19.6, module version = 1.19.6
[ 1965.938] Module class: X.Org Video Driver
[ 1965.938] ABI class: X.Org Video Driver, version 23.0
[ 1965.938] (II) LoadModule: "fbdev"
[ 1965.938] (WW) Warning, couldn't open module fbdev
[ 1965.938] (II) UnloadModule: "fbdev"
[ 1965.938] (II) Unloading fbdev
[ 1965.939] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1965.939] (II) LoadModule: "vesa"
[ 1965.939] (WW) Warning, couldn't open module vesa
[ 1965.939] (II) UnloadModule: "vesa"
[ 1965.939] (II) Unloading vesa
[ 1965.939] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1965.939] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1965.940] (II) modeset(0): using drv /dev/dri/card0
[ 1965.940] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1965.940] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 1965.940] (==) modeset(0): RGB weight 888
[ 1965.940] (==) modeset(0): Default visual is TrueColor
[ 1965.940] (II) Loading sub module "glamoregl"
[ 1965.940] (II) LoadModule: "glamoregl"
[ 1965.940] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 1965.942] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1965.942] compiled for 1.19.6, module version = 1.0.0
[ 1965.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1965.942] (II) glamor: OpenGL accelerated X.org driver based.
[ 1966.039] (II) glamor: EGL version 1.5 (DRI2):
[ 1966.046] (II) modeset(0): glamor initialized
[ 1966.056] (II) modeset(0): Output eDP-1 has no monitor section
[ 1966.100] (II) modeset(0): Output VGA-1 has no monitor section
[ 1966.100] (II) modeset(0): Output HDMI-1 has no monitor section
[ 1966.112] (II) modeset(0): EDID for output eDP-1
[ 1966.112] (II) modeset(0): Manufacturer: AUO Model: 21ec Serial#: 0
[ 1966.112] (II) modeset(0): Year: 2011 Week: 0
[ 1966.112] (II) modeset(0): EDID Version: 1.4
[ 1966.112] (II) modeset(0): Digital Display Input
[ 1966.112] (II) modeset(0): 6 bits per channel
[ 1966.112] (II) modeset(0): Digital interface is undefined
[ 1966.112] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 1966.112] (II) modeset(0): Gamma: 2.20
[ 1966.112] (II) modeset(0): No DPMS capabilities specified
[ 1966.112] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 1966.112] (II) modeset(0): First detailed timing is preferred mode
[ 1966.112] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 1966.112] (II) modeset(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 1966.112] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 1966.112] (II) modeset(0): Manufacturer's mask: 0
[ 1966.112] (II) modeset(0): Supported detailed timing:
[ 1966.112] (II) modeset(0): clock: 70.7 MHz Image Size: 344 x 193 mm
[ 1966.112] (II) modeset(0): h_active: 1366 h_sync: 1382 h_sync_end 1398 h_blank_end 1490 h_border: 0
[ 1966.112] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 785 v_blanking: 790 v_border: 0
[ 1966.112] (II) modeset(0): Unknown vendor-specific block f
[ 1966.112] (II) modeset(0): AUO
[ 1966.112] (II) modeset(0): B156XTN02.1
[ 1966.112] (II) modeset(0): EDID (in hex):
[ 1966.112] (II) modeset(0): 00ffffffffffff0006afec2100000000
[ 1966.112] (II) modeset(0): 001501049022137802c8959e57549226
[ 1966.112] (II) modeset(0): 0f505400000001010101010101010101
[ 1966.112] (II) modeset(0): 0101010101019e1b567c500016301010
[ 1966.112] (II) modeset(0): 3e0058c1100000180000000f00000000
[ 1966.112] (II) modeset(0): 00000000000000000020000000fe0041
[ 1966.112] (II) modeset(0): 554f0a202020202020202020000000fe
[ 1966.112] (II) modeset(0): 004231353658544e30322e31200a000d
[ 1966.112] (II) modeset(0): Printing probed modes for output eDP-1
[ 1966.112] (II) modeset(0): Modeline "1366x768"x60.1 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1966.112] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1280x720"x60.0 74.65 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.9 kHz)
[ 1966.112] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1152x768"x59.9 71.95 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 1966.112] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 1966.112] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 1966.112] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 1966.112] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 1966.112] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1966.112] (II) modeset(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 1966.112] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1966.112] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 1966.112] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 1966.112] (II) modeset(0): Modeline "848x480"x59.9 31.65 848 872 952 1056 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 1966.112] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 1966.112] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 1966.112] (II) modeset(0): Modeline "720x480"x59.9 26.85 720 744 808 896 480 483 493 500 -hsync +vsync (30.0 kHz)
[ 1966.112] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 1966.112] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 1966.112] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 1966.112] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 1966.112] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 1966.112] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 1966.112] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 1966.113] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 1966.113] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 1966.113] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 1966.113] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 1966.113] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 1966.113] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 1966.113] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 1966.113] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 1966.113] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 1966.113] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 1966.113] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 1966.113] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 1966.113] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 1966.157] (II) modeset(0): EDID for output VGA-1
[ 1966.157] (II) modeset(0): EDID for output HDMI-1
[ 1966.157] (II) modeset(0): Output eDP-1 connected
[ 1966.157] (II) modeset(0): Output VGA-1 disconnected
[ 1966.157] (II) modeset(0): Output HDMI-1 disconnected
[ 1966.157] (II) modeset(0): Using exact sizes for initial modes
[ 1966.157] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 1966.157] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1966.157] (==) modeset(0): DPI set to (96, 96)
[ 1966.157] (II) Loading sub module "fb"
[ 1966.158] (II) LoadModule: "fb"
[ 1966.158] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1966.158] (II) Module fb: vendor="X.Org Foundation"
[ 1966.158] compiled for 1.19.6, module version = 1.0.0
[ 1966.158] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1966.158] (==) Depth 24 pixmap format is 32 bpp
[ 1966.161] (==) modeset(0): Backing store enabled
[ 1966.161] (==) modeset(0): Silken mouse enabled
[ 1966.161] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1966.161] (==) modeset(0): DPMS enabled
[ 1966.162] (II) modeset(0): [DRI2] Setup complete
[ 1966.162] (II) modeset(0): [DRI2] DRI driver: r600
[ 1966.162] (II) modeset(0): [DRI2] VDPAU driver: r600
[ 1966.162] (--) RandR disabled
[ 1966.168] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1966.168] (II) AIGLX: enabled GLX_ARB_create_context
[ 1966.168] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1966.168] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 1966.168] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1966.168] (II) AIGLX: enabled GLX_SGI_swap_control
[ 1966.168] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1966.168] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1966.169] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 1966.169] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1966.169] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 1966.171] (II) AIGLX: Loaded and initialized r600
[ 1966.171] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1966.173] (II) modeset(0): Damage tracking initialized
[ 1966.173] (II) modeset(0): Setting screen physical size to 361 x 203
[ 1966.223] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1966.223] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1966.223] (II) LoadModule: "libinput"
[ 1966.223] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1966.226] (II) Module libinput: vendor="X.Org Foundation"
[ 1966.226] compiled for 1.19.3, module version = 0.26.0
[ 1966.226] Module class: X.Org XInput Driver
[ 1966.226] ABI class: X.Org XInput driver, version 24.1
[ 1966.226] (II) Using input driver 'libinput' for 'Power Button'
[ 1966.228] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[ 1966.228] (**) Power Button: always reports core events
[ 1966.228] (**) Option "Device" "/dev/input/event2"
[ 1966.228] (**) Option "_source" "server/udev"
[ 1966.229] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 1966.229] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 1966.229] (II) event2 - (II) Power Button: (II) device removed
[ 1966.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 1966.229] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1966.230] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 1966.230] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 1966.230] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 1966.230] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 1966.230] (II) Using input driver 'libinput' for 'Video Bus'
[ 1966.232] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[ 1966.232] (**) Video Bus: always reports core events
[ 1966.232] (**) Option "Device" "/dev/input/event3"
[ 1966.232] (**) Option "_source" "server/udev"
[ 1966.233] (II) event3 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 1966.233] (II) event3 - (II) Video Bus: (II) device is a keyboard
[ 1966.233] (II) event3 - (II) Video Bus: (II) device removed
[ 1966.233] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3/event3"
[ 1966.233] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1966.234] (II) event3 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 1966.234] (II) event3 - (II) Video Bus: (II) device is a keyboard
[ 1966.234] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1966.235] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1966.235] (II) Using input driver 'libinput' for 'Power Button'
[ 1966.236] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[ 1966.236] (**) Power Button: always reports core events
[ 1966.237] (**) Option "Device" "/dev/input/event0"
[ 1966.237] (**) Option "_source" "server/udev"
[ 1966.238] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 1966.238] (II) event0 - (II) Power Button: (II) device is a keyboard
[ 1966.238] (II) event0 - (II) Power Button: (II) device removed
[ 1966.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 1966.238] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 1966.239] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 1966.239] (II) event0 - (II) Power Button: (II) device is a keyboard
[ 1966.239] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1966.239] (II) No input driver specified, ignoring this device.
[ 1966.239] (II) This device may have been added with another device file.
[ 1966.240] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 1966.240] (II) No input driver specified, ignoring this device.
[ 1966.240] (II) This device may have been added with another device file.
[ 1966.241] (II) config/udev: Adding input device WebCam SC-13HDL11939N: WebCam S (/dev/input/event9)
[ 1966.241] (**) WebCam SC-13HDL11939N: WebCam S: Applying InputClass "libinput keyboard catchall"
[ 1966.241] (II) Using input driver 'libinput' for 'WebCam SC-13HDL11939N: WebCam S'
[ 1966.242] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 32 paused 0
[ 1966.242] (**) WebCam SC-13HDL11939N: WebCam S: always reports core events
[ 1966.242] (**) Option "Device" "/dev/input/event9"
[ 1966.242] (**) Option "_source" "server/udev"
[ 1966.243] (II) event9 - (II) WebCam SC-13HDL11939N: WebCam S: (II) is tagged by udev as: Keyboard
[ 1966.243] (II) event9 - (II) WebCam SC-13HDL11939N: WebCam S: (II) device is a keyboard
[ 1966.243] (II) event9 - (II) WebCam SC-13HDL11939N: WebCam S: (II) device removed
[ 1966.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input11/event9"
[ 1966.243] (II) XINPUT: Adding extended input device "WebCam SC-13HDL11939N: WebCam S" (type: KEYBOARD, id 9)
[ 1966.244] (II) event9 - (II) WebCam SC-13HDL11939N: WebCam S: (II) is tagged by udev as: Keyboard
[ 1966.244] (II) event9 - (II) WebCam SC-13HDL11939N: WebCam S: (II) device is a keyboard
[ 1966.245] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event8)
[ 1966.245] (II) No input driver specified, ignoring this device.
[ 1966.245] (II) This device may have been added with another device file.
[ 1966.245] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event7)
[ 1966.245] (II) No input driver specified, ignoring this device.
[ 1966.245] (II) This device may have been added with another device file.
[ 1966.246] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 1966.246] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 1966.246] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 1966.248] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 33 paused 0
[ 1966.248] (**) AT Translated Set 2 keyboard: always reports core events
[ 1966.248] (**) Option "Device" "/dev/input/event4"
[ 1966.248] (**) Option "_source" "server/udev"
[ 1966.249] (II) event4 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 1966.249] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 1966.249] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 1966.249] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 1966.249] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1966.250] (II) event4 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 1966.250] (II) event4 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 1966.251] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 1966.251] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 1966.251] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 1966.252] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 34 paused 0
[ 1966.252] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1966.252] (**) Option "Device" "/dev/input/event10"
[ 1966.252] (**) Option "_source" "server/udev"
[ 1966.253] (II) event10 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 1966.253] (II) event10 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 1966.253] (II) event10 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 1966.253] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[ 1966.253] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 1966.254] (**) Option "AccelerationScheme" "none"
[ 1966.254] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 1966.254] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1966.254] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1966.254] (II) event10 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 1966.254] (II) event10 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 1966.255] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1966.255] (II) No input driver specified, ignoring this device.
[ 1966.255] (II) This device may have been added with another device file.
[ 1966.255] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1966.255] (II) No input driver specified, ignoring this device.
[ 1966.255] (II) This device may have been added with another device file.
[ 1967.729] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1967.729] (II) modeset(0): Printing DDC gathered Modelines:
[ 1967.729] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1968.509] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1968.509] (II) modeset(0): Printing DDC gathered Modelines:
[ 1968.509] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1968.572] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1968.572] (II) modeset(0): Printing DDC gathered Modelines:
[ 1968.572] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1968.641] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1968.641] (II) modeset(0): Printing DDC gathered Modelines:
[ 1968.641] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1970.140] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1970.140] (II) modeset(0): Printing DDC gathered Modelines:
[ 1970.140] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1970.837] (II) modeset(0): EDID vendor "AUO", prod id 8684
[ 1970.837] (II) modeset(0): Printing DDC gathered Modelines:
[ 1970.837] (II) modeset(0): Modeline "1366x768"x0.0 70.70 1366 1382 1398 1490 768 771 785 790 -hsync -vsync (47.4 kHz eP)
[ 1971.837] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 2015.707] (II) Axis 0x1 value 5856 is outside expected range [1027, 4960]
See [url]https://wayland.freedesktop.org/libinput/doc/1.9.4//absolute_coordinate_ranges.html[/url] for details
[ 7778.411] (II) Axis 0x1 value 5856 is outside expected range [1027, 4960]
See [url]https://wayland.freedesktop.org/libinput/doc/1.9.4//absolute_coordinate_ranges.html[/url] for detailsdmesg
[ 0.000000] Linux version 4.15.2-2-ARCH (builduser@heftig-7084) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Thu Feb 8 18:54:52 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=efe6f001-a9c8-43bd-b658-6421300637bb rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x1d9/0x220 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009e305fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e306000-0x000000009e483fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e484000-0x000000009e493fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009e494000-0x000000009e7d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e7d9000-0x000000009ed30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ed31000-0x000000009ed31fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ed32000-0x000000009ef34fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ef35000-0x000000009f623fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f624000-0x000000009f7f2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7f3000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff010000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 355V4C/356V4C/3445VC/3545VC/NP365E5C-S05US, BIOS P07ABF 07/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-D0FFF write-protect
[ 0.000000] D1000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001bf000000 aka 7152M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 2552M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x114637000, 0x114637fff] PGTABLE
[ 0.000000] BRK [0x114638000, 0x114638fff] PGTABLE
[ 0.000000] BRK [0x114639000, 0x114639fff] PGTABLE
[ 0.000000] BRK [0x11463a000, 0x11463afff] PGTABLE
[ 0.000000] BRK [0x11463b000, 0x11463bfff] PGTABLE
[ 0.000000] BRK [0x11463c000, 0x11463cfff] PGTABLE
[ 0.000000] BRK [0x11463d000, 0x11463dfff] PGTABLE
[ 0.000000] BRK [0x11463e000, 0x11463efff] PGTABLE
[ 0.000000] BRK [0x11463f000, 0x11463ffff] PGTABLE
[ 0.000000] BRK [0x114640000, 0x114640fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x371e7000-0x378eafff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 0x000000009E487078 00006C (v01 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009E490BF0 00010C (v05 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x000000009E487170 009A79 (v02 SECCSD LH43STAR 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009E7D0080 000040
[ 0.000000] ACPI: APIC 0x000000009E490D00 000072 (v03 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009E490D78 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009E490DC0 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013)
[ 0.000000] ACPI: MSDM 0x000000009E490E00 000055 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x000000009E490E58 000038 (v01 SECCSD LH43STAR 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009E490E90 0005E0 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009E491470 001ECC (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SLIC 0x000000009E493340 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001beffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1beffa000-0x1beffcfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001beffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009e305fff]
[ 0.000000] node 0: [mem 0x000000009ed31000-0x000000009ed31fff]
[ 0.000000] node 0: [mem 0x000000009ef35000-0x000000009f623fff]
[ 0.000000] node 0: [mem 0x000000009f7f3000-0x000000009f7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x00000001beffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001beffffff]
[ 0.000000] On node 0 totalpages: 1431968
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10089 pages used for memmap
[ 0.000000] DMA32 zone: 645635 pages, LIFO batch:31
[ 0.000000] Normal zone: 12224 pages used for memmap
[ 0.000000] Normal zone: 782335 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e306000-0x9e483fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e484000-0x9e493fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e494000-0x9e7d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e7d9000-0x9ed30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ed32000-0x9ef34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f624000-0x9f7f2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff00ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff010000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1409570
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=efe6f001-a9c8-43bd-b658-6421300637bb rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5540944K/5727872K available (10252K kernel code, 1241K rwdata, 3220K rodata, 1432K init, 636K bss, 186928K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31397 entries in 123 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005000] tsc: Fast TSC calibration using PIT
[ 0.006000] tsc: Detected 2695.087 MHz processor
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.17 BogoMIPS (lpj=2695087)
[ 0.006000] pid_max: default: 32768 minimum: 301
[ 0.007091] Security Framework initialized
[ 0.007094] Yama: becoming mindful.
[ 0.012278] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014895] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015041] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015125] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015742] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015755] CPU: Physical Processor ID: 0
[ 0.015757] CPU: Processor Core ID: 0
[ 0.015761] mce: CPU supports 7 MCE banks
[ 0.015794] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.015797] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.015803] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.015804] Spectre V2 : Filling RSB on context switch
[ 0.016103] Freeing SMP alternatives memory: 24K
[ 0.019000] smpboot: CPU0: AMD A6-4400M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
[ 0.022061] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.022069] ... version: 0
[ 0.022070] ... bit width: 48
[ 0.022071] ... generic registers: 6
[ 0.022072] ... value mask: 0000ffffffffffff
[ 0.022072] ... max period: 00007fffffffffff
[ 0.022073] ... fixed-purpose events: 0
[ 0.022074] ... event mask: 000000000000003f
[ 0.024037] Hierarchical SRCU implementation.
[ 0.030159] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.032035] smp: Bringing up secondary CPUs ...
[ 0.041088] x86: Booting SMP configuration:
[ 0.041094] .... node #0, CPUs: #1
[ 0.042081] smp: Brought up 1 node, 2 CPUs
[ 0.042081] smpboot: Max logical packages: 2
[ 0.042081] smpboot: Total of 2 processors activated (10780.34 BogoMIPS)
[ 0.043325] devtmpfs: initialized
[ 0.043325] x86/mm: Memory block size: 128MB
[ 0.044004] PM: Registering ACPI NVS region [mem 0x9e494000-0x9e7d8fff] (3428352 bytes)
[ 0.044004] PM: Registering ACPI NVS region [mem 0x9ed32000-0x9ef34fff] (2109440 bytes)
[ 0.044015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.044016] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.044086] pinctrl core: initialized pinctrl subsystem
[ 0.044235] RTC time: 10:15:09, date: 02/15/18
[ 0.044382] NET: Registered protocol family 16
[ 0.045034] cpuidle: using governor ladder
[ 0.046063] cpuidle: using governor menu
[ 0.046205] ACPI: bus type PCI registered
[ 0.046211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.046476] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.046485] PCI: not using MMCONFIG
[ 0.046488] PCI: Using configuration type 1 for base access
[ 0.046490] PCI: Using configuration type 1 for extended access
[ 0.049040] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.049040] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.049101] ACPI: Added _OSI(Module Device)
[ 0.049103] ACPI: Added _OSI(Processor Device)
[ 0.049104] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.049105] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.049280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.056011] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.057280] ACPI: EC: EC started
[ 0.057281] ACPI: EC: interrupt blocked
[ 0.058764] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.058766] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.058768] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.058768] ACPI: Interpreter enabled
[ 0.058802] ACPI: (supports S0 S3 S4 S5)
[ 0.058804] ACPI: Using IOAPIC for interrupt routing
[ 0.059034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.059095] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.059111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.059477] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.076016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.076024] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.076290] acpi PNP0A03:00: _OSC: platform does not support [PME]
[ 0.076544] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.077068] PCI host bridge to bus 0000:00
[ 0.077070] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.077072] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.077073] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.077075] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.077076] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.077078] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.077079] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.077081] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.077090] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.077237] pci 0000:00:01.0: [1002:9990] type 00 class 0x030000
[ 0.077249] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.077254] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.077258] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.077275] pci 0000:00:01.0: enabling Extended Tags
[ 0.077300] pci 0000:00:01.0: supports D1 D2
[ 0.077393] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.077404] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.077427] pci 0000:00:01.1: enabling Extended Tags
[ 0.077450] pci 0000:00:01.1: supports D1 D2
[ 0.077585] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.077607] pci 0000:00:04.0: enabling Extended Tags
[ 0.077632] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.077733] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.077754] pci 0000:00:05.0: enabling Extended Tags
[ 0.077780] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.077942] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.077968] pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.078066] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.078180] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.078199] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.078207] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.078215] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.078223] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.078231] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.078240] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4c000-0xfeb4c7ff]
[ 0.078375] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.078393] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.078551] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.078569] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.078637] pci 0000:00:12.2: supports D1 D2
[ 0.078639] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.078749] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.078904] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.078925] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.078982] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.079086] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.079247] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.079390] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.079485] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.079576] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.079667] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.079763] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.079856] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.080022] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.080048] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.080072] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.080090] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.080168] pci 0000:02:00.0: supports D1 D2
[ 0.080170] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.083095] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.083101] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.083106] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.083189] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.083216] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[ 0.083253] pci 0000:03:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[ 0.083322] pci 0000:03:00.0: supports D1 D2
[ 0.083324] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087073] pci 0000:00:05.0: PCI bridge to [bus 03-0b]
[ 0.087090] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.087321] pci 0000:00:14.4: PCI bridge to [bus 0c-12] (subtractive decode)
[ 0.087343] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.087350] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.087356] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.087361] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.087366] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.087371] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.087375] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.091644] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.091745] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.091847] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.092025] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.092107] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.092172] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.092236] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.092303] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.093001] ACPI: EC: interrupt unblocked
[ 0.093001] ACPI: EC: event unblocked
[ 0.093001] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.093001] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.093016] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.093016] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.093020] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.093021] vgaarb: loaded
[ 0.093212] EDAC MC: Ver: 3.0.0
[ 0.094159] PCI: Using ACPI for IRQ routing
[ 0.102574] PCI: pci_cache_line_size set to 64 bytes
[ 0.102621] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.102624] e820: reserve RAM buffer [mem 0x9e306000-0x9fffffff]
[ 0.102625] e820: reserve RAM buffer [mem 0x9ed32000-0x9fffffff]
[ 0.102626] e820: reserve RAM buffer [mem 0x9f624000-0x9fffffff]
[ 0.102627] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.102628] e820: reserve RAM buffer [mem 0x1bf000000-0x1bfffffff]
[ 0.103005] NetLabel: Initializing
[ 0.103005] NetLabel: domain hash size = 128
[ 0.103005] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.103005] NetLabel: unlabeled traffic allowed by default
[ 0.103079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.103083] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.105038] clocksource: Switched to clocksource hpet
[ 0.119665] VFS: Disk quotas dquot_6.6.0
[ 0.119691] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.119789] pnp: PnP ACPI init
[ 0.119980] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.119986] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.120427] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.120429] system 00:01: [io 0x040b] has been reserved
[ 0.120430] system 00:01: [io 0x04d6] has been reserved
[ 0.120432] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.120434] system 00:01: [io 0x0c14] has been reserved
[ 0.120435] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.120437] system 00:01: [io 0x0c52] has been reserved
[ 0.120438] system 00:01: [io 0x0c6c] has been reserved
[ 0.120440] system 00:01: [io 0x0c6f] has been reserved
[ 0.120441] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.120446] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.120447] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.120449] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.120451] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.120452] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.120454] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.120455] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.120457] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.120459] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.120461] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.120463] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.120465] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.120467] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.120469] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.120471] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.120473] system 00:01: [mem 0xff010000-0xffffffff] has been reserved
[ 0.120477] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.120511] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.120581] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.120586] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.120635] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122486] pnp 00:05: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
[ 0.122625] pnp 00:06: Plug and Play ACPI device, IDs MSF0001 PNP030b (active)
[ 0.122967] system 00:07: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.122983] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124264] pnp: PnP ACPI: found 8 devices
[ 0.131872] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.131889] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000 add_align 100000
[ 0.131905] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd04fffff]
[ 0.131908] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.131910] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.131913] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd04fffff]
[ 0.131915] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.131919] pci 0000:00:05.0: PCI bridge to [bus 03-0b]
[ 0.131921] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.131926] pci 0000:00:14.4: PCI bridge to [bus 0c-12]
[ 0.131938] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.131940] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.131941] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.131942] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.131944] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.131945] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.131947] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.131948] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.131949] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd04fffff]
[ 0.131951] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.131952] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.131954] pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
[ 0.131955] pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.131957] pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
[ 0.131958] pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
[ 0.131959] pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.131961] pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.131962] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.132087] NET: Registered protocol family 2
[ 0.132307] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.132493] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.132779] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.132855] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.132905] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.133034] NET: Registered protocol family 1
[ 0.133055] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.209639] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.209682] PCI: CLS 64 bytes, default 64
[ 0.209734] Unpacking initramfs...
[ 0.327941] Freeing initrd memory: 7184K
[ 0.327946] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.327950] software IO TLB [mem 0x9a306000-0x9e306000] (64MB) mapped at [000000001aced9fd-00000000d8160b75]
[ 0.327983] amd_uncore: AMD NB counters detected
[ 0.328099] LVT offset 0 assigned for vector 0x400
[ 0.328129] perf: AMD IBS detected (0x000000ff)
[ 0.328192] Scanning for low memory corruption every 60 seconds
[ 0.328273] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x420000 bytes, mapped to 0x0000000046074558
[ 0.328275] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1366x768x32, linelength=5632
[ 0.330735] Console: switching to colour frame buffer device 170x48
[ 0.333083] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.333615] Initialise system trusted keyrings
[ 0.333626] Key type blacklist registered
[ 0.333750] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 0.335114] zbud: loaded
[ 0.337412] Key type asymmetric registered
[ 0.337414] Asymmetric key parser 'x509' registered
[ 0.337459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.337520] io scheduler noop registered
[ 0.337521] io scheduler deadline registered
[ 0.337570] io scheduler cfq registered (default)
[ 0.337571] io scheduler mq-deadline registered
[ 0.337572] io scheduler kyber registered
[ 0.337600] io scheduler bfq registered
[ 0.338242] pciehp 0000:00:04.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 0.338441] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.338466] ACPI: Power Button [PWRB]
[ 0.338507] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.338556] ACPI: Lid Switch [LID]
[ 0.338593] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.338615] ACPI: Power Button [PWRF]
[ 0.338768] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.339919] acpi device:2f: registered as cooling_device0
[ 0.339964] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
[ 0.340704] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.340902] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.340903] ACPI: Thermal Zone [TZ00] (0 C)
[ 0.341220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.342315] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.342577] NET: Registered protocol family 10
[ 0.347063] Segment Routing with IPv6
[ 0.347092] NET: Registered protocol family 17
[ 0.347310] RAS: Correctable Errors collector initialized.
[ 0.347349] microcode: CPU0: patch_level=0x06001116
[ 0.347371] microcode: CPU1: patch_level=0x06001116
[ 0.347431] microcode: Microcode Update Driver: v2.2.
[ 0.347451] sched_clock: Marking stable (347422430, 0)->(458071322, -110648892)
[ 0.347686] registered taskstats version 1
[ 0.347694] Loading compiled-in X.509 certificates
[ 0.347714] zswap: loaded using pool lzo/zbud
[ 0.351810] Key type big_key registered
[ 0.352082] Magic number: 6:879:274
[ 0.352105] tty tty11: hash matches
[ 0.352146] hctosys: unable to open rtc device (rtc0)
[ 0.354816] Freeing unused kernel memory: 1432K
[ 0.354819] Write protecting the kernel read-only data: 16384k
[ 0.355742] Freeing unused kernel memory: 2016K
[ 0.358162] Freeing unused kernel memory: 876K
[ 0.466625] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.481489] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.481567] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.483724] ACPI: bus type USB registered
[ 0.483761] usbcore: registered new interface driver usbfs
[ 0.483777] usbcore: registered new interface driver hub
[ 0.485474] usbcore: registered new device driver usb
[ 0.487542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.488950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.488952] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.490078] SCSI subsystem initialized
[ 0.494216] ehci-pci: EHCI PCI platform driver
[ 0.494537] QUIRK: Enable AMD PLL fix
[ 0.494571] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.494579] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.494588] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.494600] ehci-pci 0000:00:12.2: debug port 1
[ 0.494654] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000
[ 0.501038] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.501132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.501135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.501137] usb usb1: Product: EHCI Host Controller
[ 0.501139] usb usb1: Manufacturer: Linux 4.15.2-2-ARCH ehci_hcd
[ 0.501140] usb usb1: SerialNumber: 0000:00:12.2
[ 0.501167] libata version 3.00 loaded.
[ 0.501364] hub 1-0:1.0: USB hub found
[ 0.501374] hub 1-0:1.0: 5 ports detected
[ 0.502332] ohci-pci: OHCI PCI platform driver
[ 0.502561] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.502568] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 0.502610] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4b000
[ 0.538717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.558272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.558276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.558277] usb usb2: Product: OHCI PCI host controller
[ 0.558278] usb usb2: Manufacturer: Linux 4.15.2-2-ARCH ohci_hcd
[ 0.558280] usb usb2: SerialNumber: 0000:00:12.0
[ 0.558491] hub 2-0:1.0: USB hub found
[ 0.558503] hub 2-0:1.0: 5 ports detected
[ 0.558962] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.558969] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.559156] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[ 0.559372] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.559373] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.559375] usb usb3: Product: xHCI Host Controller
[ 0.559376] usb usb3: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[ 0.559377] usb usb3: SerialNumber: 0000:00:10.0
[ 0.559507] hub 3-0:1.0: USB hub found
[ 0.559521] hub 3-0:1.0: 2 ports detected
[ 0.559658] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.559665] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 0.562593] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.562632] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.562634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.562636] usb usb4: Product: xHCI Host Controller
[ 0.562638] usb usb4: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[ 0.562639] usb usb4: SerialNumber: 0000:00:10.0
[ 0.562813] hub 4-0:1.0: USB hub found
[ 0.562824] hub 4-0:1.0: 2 ports detected
[ 0.563044] ahci 0000:00:11.0: version 3.0
[ 0.563391] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xd impl SATA mode
[ 0.563394] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 0.565834] scsi host0: ahci
[ 0.566221] scsi host1: ahci
[ 0.566383] scsi host2: ahci
[ 0.566540] scsi host3: ahci
[ 0.566599] ata1: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c100 irq 28
[ 0.566600] ata2: DUMMY
[ 0.566603] ata3: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c200 irq 28
[ 0.566605] ata4: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c280 irq 28
[ 0.825211] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 0.879657] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.881107] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.954867] usb 1-3: New USB device found, idVendor=0bda, idProduct=0129
[ 0.954870] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.954872] usb 1-3: Product: USB2.0-CRW
[ 0.954873] usb 1-3: Manufacturer: Generic
[ 0.954874] usb 1-3: SerialNumber: 20100201396000000
[ 0.960384] usbcore: registered new interface driver rtsx_usb
[ 1.018625] usb 3-1: New USB device found, idVendor=0781, idProduct=5575
[ 1.018634] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.018640] usb 3-1: Product: Cruzer Glide
[ 1.018644] usb 3-1: Manufacturer: SanDisk
[ 1.018648] usb 3-1: SerialNumber: 4C530001121030105443
[ 1.023646] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.023975] scsi host4: usb-storage 3-1:1.0
[ 1.024094] usbcore: registered new interface driver usb-storage
[ 1.024808] usbcore: registered new interface driver uas
[ 1.039215] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.039252] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.045523] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[ 1.045526] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.046235] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC01, max UDMA/100
[ 1.051852] ata1.00: configured for UDMA/133
[ 1.052064] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0002 PQ: 0 ANSI: 5
[ 1.058630] ata3.00: configured for UDMA/100
[ 1.071182] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC01 PQ: 0 ANSI: 5
[ 1.094804] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.094807] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.094822] sd 0:0:0:0: [sda] Write Protect is off
[ 1.094824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.094852] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118705] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.118713] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.119681] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.319216] usb 2-4: new full-speed USB device number 2 using ohci-pci
[ 1.375184] tsc: Refined TSC clocksource calibration: 2695.099 MHz
[ 1.375194] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d928ae5ab, max_idle_ns: 440795220762 ns
[ 1.484365] usb 2-4: New USB device found, idVendor=0cf3, idProduct=3004
[ 1.484374] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.484380] usb 2-4: Product: Bluetooth USB Host Controller
[ 1.484384] usb 2-4: Manufacturer: Atheros Communications
[ 1.484389] usb 2-4: SerialNumber: Alaska Day 2006
[ 1.498177] sda: sda1 sda2 sda3 sda4 sda5
[ 1.499610] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.961144] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 2.080601] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Glide 1.00 PQ: 0 ANSI: 6
[ 2.081677] sd 4:0:0:0: [sdb] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.082663] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.082666] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.083319] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.087789] sdb: sdb1 sdb2 sdb3
[ 2.090270] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.188426] random: crng init done
[ 2.206876] usb 1-5: New USB device found, idVendor=2232, idProduct=1029
[ 2.206885] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.206891] usb 1-5: Product: WebCam SC-13HDL11939N
[ 2.206895] usb 1-5: Manufacturer: Generic
[ 2.206899] usb 1-5: SerialNumber: 200901010001
[ 2.383244] clocksource: Switched to clocksource tsc
[ 2.569671] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.247273] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.266249] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 3.281156] systemd[1]: Detected architecture x86-64.
[ 3.284567] systemd[1]: Set hostname to <Anonymous>.
[ 3.884373] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.884463] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.884918] systemd[1]: Created slice User and Session Slice.
[ 3.884931] systemd[1]: Reached target Login Prompts.
[ 3.884973] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.884982] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.884992] systemd[1]: Reached target Paths.
[ 4.142999] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 4.232213] systemd-journald[206]: Received request to flush runtime journal from PID 1
[ 6.190234] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.332632] Linux agpgart interface v0.103
[ 6.335840] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.335844] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 6.335993] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.353982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.396988] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.397216] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x14
[ 6.397221] sp5100_tco: I/O address 0x0cd6 already in use
[ 6.397875] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 6.397916] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.425136] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 6.425204] ACPI: Battery Slot [BAT1] (battery present)
[ 6.426661] ACPI: AC Adapter [ACAD] (on-line)
[ 6.568373] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.569262] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0x0000000011760396, 20:89:84:0f:dc:7e, XID 08000880 IRQ 29
[ 6.569266] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.657630] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 6.713215] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.739779] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 6.788295] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.788299] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.788301] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 6.788304] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.788305] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.788308] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19
[ 6.788309] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 6.812194] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 6.812258] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 6.829841] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.840033] Bluetooth: Core ver 2.22
[ 6.840057] NET: Registered protocol family 31
[ 6.840058] Bluetooth: HCI device and connection manager initialized
[ 6.840063] Bluetooth: HCI socket layer initialized
[ 6.840066] Bluetooth: L2CAP socket layer initialized
[ 6.840073] Bluetooth: SCO socket layer initialized
[ 6.850336] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.865628] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.865639] cfg80211: failed to load regulatory.db
[ 6.893299] media: Linux media interface: v0.10
[ 6.906633] usbcore: registered new interface driver btusb
[ 6.937064] usbcore: registered new interface driver ath3k
[ 7.023653] [drm] radeon kernel modesetting enabled.
[ 7.023707] checking generic (c0000000 420000) vs hw (c0000000 10000000)
[ 7.023708] fb: switching to radeondrmfb from simple
[ 7.023736] Console: switching to colour dummy device 80x25
[ 7.024573] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9990 0x144D:0xC0DD 0x00).
[ 7.024668] ATOM BIOS: 113
[ 7.024763] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.024765] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 7.024770] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.024771] [drm] RAM width 64bits DDR
[ 7.024853] [TTM] Zone kernel: Available graphics memory: 2776238 kiB
[ 7.024854] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 7.024855] [TTM] Initializing pool allocator
[ 7.024860] [TTM] Initializing DMA pool allocator
[ 7.024890] [drm] radeon: 512M of VRAM memory ready
[ 7.024892] [drm] radeon: 1024M of GTT memory ready.
[ 7.024905] [drm] Loading ARUBA Microcode
[ 7.074112] Linux video capture interface: v2.00
[ 7.190610] [drm] Internal thermal controller without fan control
[ 7.190902] [drm] radeon: dpm initialized
[ 7.217251] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 7.217277] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 7.231282] AVX version of gcm_enc/dec engaged.
[ 7.231284] AES CTR mode by8 optimization enabled
[ 7.231564] samsung_laptop: detected SABI interface: SwSmi@
[ 7.248270] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11939N (2232:1029)
[ 7.271270] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.271274] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.271277] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.272142] input: WebCam SC-13HDL11939N: WebCam S as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input11
[ 7.272321] usbcore: registered new interface driver uvcvideo
[ 7.272322] USB Video Class driver (1.1.1)
[ 7.314616] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 7.314773] radeon 0000:00:01.0: WB enabled
[ 7.314778] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x00000000b1f3af75
[ 7.315188] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x00000000974a10b1
[ 7.335388] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000cad4b8e3
[ 7.335393] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x00000000d413ba65
[ 7.335396] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x000000004bf8ae9d
[ 7.335398] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x000000000ffd91d5
[ 7.335401] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000c12e76fb
[ 7.335403] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x000000008e58fa48
[ 7.335406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.335407] [drm] Driver supports precise vblank timestamp query.
[ 7.335409] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 7.335464] radeon 0000:00:01.0: radeon: using MSI.
[ 7.335494] [drm] radeon: irq initialized.
[ 7.353106] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 7.357544] [drm] ring test on 0 succeeded in 2 usecs
[ 7.357554] [drm] ring test on 3 succeeded in 3 usecs
[ 7.357560] [drm] ring test on 4 succeeded in 3 usecs
[ 7.389295] ath: phy0: Set BT/WLAN RX diversity capability
[ 7.397724] ath: phy0: ASPM enabled: 0x42
[ 7.397728] ath: EEPROM regdomain: 0x65
[ 7.397729] ath: EEPROM indicates we should expect a direct regpair map
[ 7.397731] ath: Country alpha2 being used: 00
[ 7.397732] ath: Regpair used: 0x65
[ 7.425659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.426816] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa25dc2880000, irq=17
[ 7.438521] [drm] ring test on 5 succeeded in 1 usecs
[ 7.458565] [drm] UVD initialized successfully.
[ 7.532401] EXT4-fs (sda5): VFS: Can't find ext4 filesystem
[ 7.626684] [drm] ring test on 6 succeeded in 17 usecs
[ 7.626696] [drm] ring test on 7 succeeded in 3 usecs
[ 7.626697] [drm] VCE initialized successfully.
[ 7.627300] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.627361] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.627416] [drm] ib test on ring 4 succeeded in 0 usecs
[ 7.644639] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 7.653933] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.680558] kvm: Nested Virtualization enabled
[ 7.680562] kvm: Nested Paging enabled
[ 7.692306] MCE: In-kernel MCE decoding enabled.
[ 7.698806] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.698809] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.710403] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.710406] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.764359] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4782]
[ 7.822115] psmouse serio1: synaptics: queried min coordinates: x [1308..], y [1206..]
[ 7.847780] microcode: CPU0: new patch_level=0x06001119
[ 7.939531] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00433/0x240000/0xa2400/0x0, board id: 1874, fw id: 1206283
[ 8.005338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 8.012171] mousedev: PS/2 mouse device common for all mice
[ 8.167293] [drm] ib test on ring 5 succeeded
[ 8.695306] [drm] ib test on ring 6 succeeded
[ 9.199317] [drm] ib test on ring 7 succeeded
[ 9.201677] [drm] radeon atom DIG backlight initialized
[ 9.201682] [drm] Radeon Display Connectors
[ 9.201684] [drm] Connector 0:
[ 9.201686] [drm] eDP-1
[ 9.201688] [drm] HPD1
[ 9.201692] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 9.201693] [drm] Encoders:
[ 9.201695] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.201697] [drm] Connector 1:
[ 9.201699] [drm] VGA-1
[ 9.201700] [drm] HPD2
[ 9.201704] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 9.201705] [drm] Encoders:
[ 9.201707] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.201709] [drm] CRT1: NUTMEG
[ 9.201710] [drm] Connector 2:
[ 9.201712] [drm] HDMI-A-1
[ 9.201713] [drm] HPD3
[ 9.201717] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 9.201718] [drm] Encoders:
[ 9.201720] [drm] DFP1: INTERNAL_UNIPHY
[ 10.343366] [drm] fb mappable at 0xC03DA000
[ 10.343370] [drm] vram apper at 0xC0000000
[ 10.343371] [drm] size 4325376
[ 10.343373] [drm] fb depth is 24
[ 10.343375] [drm] pitch is 5632
[ 10.343588] fbcon: radeondrmfb (fb0) is primary device
[ 12.484645] Console: switching to colour frame buffer device 170x48
[ 12.487340] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 12.496344] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 55.508261] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 55.616930] r8169 0000:02:00.0 enp2s0: link down
[ 55.616931] r8169 0000:02:00.0 enp2s0: link down
[ 55.617021] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 55.658783] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 57.810067] r8169 0000:02:00.0 enp2s0: link up
[ 57.810083] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 86.118916] fuse init (API version 7.26)
[ 89.253067] rfkill: input handler disabled
[ 1762.080370] rfkill: input handler enabled
[ 1816.359091] rfkill: input handler disabled
[ 1871.351780] rfkill: input handler enabled
[ 1903.560811] rfkill: input handler disabled
[ 1947.101766] rfkill: input handler enabled
[ 1974.180992] r8169 0000:02:00.0 enp2s0: link down
[ 2040.084046] r8169 0000:02:00.0 enp2s0: link up
[ 2040.084061] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 8276.916569] r8169 0000:02:00.0 enp2s0: link down
[ 8279.080942] r8169 0000:02:00.0 enp2s0: link up
[ 8279.080959] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 8281.876395] r8169 0000:02:00.0 enp2s0: link down
[ 8284.009087] r8169 0000:02:00.0 enp2s0: link up
[ 8284.009100] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 8286.002407] r8169 0000:02:00.0 enp2s0: link down
[ 8288.140758] r8169 0000:02:00.0 enp2s0: link up
[ 8288.140774] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes readyLast edited by Jasonls221 (2018-02-15 15:08:40)
Offline
#4 2018-02-15 14:28:34
- archimboldo
- Member
- Registered: 2016-03-07
- Posts: 232
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Rules for problems.
Everyone has problems. Animals have problems. And buildings. And cats, and trees.
Problems are your friends. Treat them well.
Offline
#5 2018-02-15 15:09:28
- Jasonls221
- Member
- Registered: 2018-02-15
- Posts: 5
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
archimboldo wrote:
Fixed and thanks
Offline
#6 2018-02-15 19:17:56
- Batou
- Member
- Registered: 2017-01-03
- Posts: 262
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
I don't see any errors or anything really strange. What display manager do you use, how you start cinnamon and what errors do you see when it doesn't start? What video card and drivers do you use? Do you see any errors in ~/.cinnamon/glass.log ?
You could purge all the settings for cinnamon with
gsettings reset-recursively org.cinnamon Last edited by Batou (2018-02-15 19:18:36)
Please vote for all the AUR packages you're using. You can mass-vote for all of them by doing: "pacman -Qqm | xargs aurvote -v" (make sure to run "aurvote --configure" first)
Offline
#7 2018-02-15 19:57:22
- Jasonls221
- Member
- Registered: 2018-02-15
- Posts: 5
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Batou wrote:
I don't see any errors or anything really strange. What display manager do you use, how you start cinnamon and what errors do you see when it doesn't start? What video card and drivers do you use? Do you see any errors in ~/.cinnamon/glass.log ?
You could purge all the settings for cinnamon with
gsettings reset-recursively org.cinnamon
I'm using gdm and I don't see any errors it just uses gnome instead it seems.
I have a Radeon HD 7520G and all I know is I'm using a compatible driver.
There are no errors
Offline
#8 2018-02-15 20:18:43
- 2ManyDogs
- Forum Fellow
- Registered: 2012-01-15
- Posts: 4,648
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
How did you install Arch?
Offline
#9 2018-02-15 20:35:59
- Batou
- Member
- Registered: 2017-01-03
- Posts: 262
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Jasonls221 wrote:
Batou wrote:I don't see any errors or anything really strange. What display manager do you use, how you start cinnamon and what errors do you see when it doesn't start? What video card and drivers do you use? Do you see any errors in ~/.cinnamon/glass.log ?
You could purge all the settings for cinnamon with
gsettings reset-recursively org.cinnamonI'm using gdm and I don't see any errors it just uses gnome instead it seems.
I have a Radeon HD 7520G and all I know is I'm using a compatible driver.
There are no errors
If a reinstall of cinnamon fixes things, the issue is probably with GNOME Shell. It somehow overwrites Cinnamon settings. To simplify your life, uninstall GNOME Shell and gdm and just install lightdm + cinnamon.
Please vote for all the AUR packages you're using. You can mass-vote for all of them by doing: "pacman -Qqm | xargs aurvote -v" (make sure to run "aurvote --configure" first)
Offline
#10 2018-02-15 21:53:51
- loqs
- Member
- Registered: 2014-03-06
- Posts: 19,113
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
What exactly does not work when you start cinnamon after a restart? What are you presented with? What is wrong / missing / different?
Offline
#11 2018-02-16 10:22:14
- Jasonls221
- Member
- Registered: 2018-02-15
- Posts: 5
Re: [Solved] Cinnamon gui doesn't work after restart unless I reinstall it
Batou wrote:
Jasonls221 wrote:Batou wrote:I don't see any errors or anything really strange. What display manager do you use, how you start cinnamon and what errors do you see when it doesn't start? What video card and drivers do you use? Do you see any errors in ~/.cinnamon/glass.log ?
You could purge all the settings for cinnamon with
gsettings reset-recursively org.cinnamonI'm using gdm and I don't see any errors it just uses gnome instead it seems.
I have a Radeon HD 7520G and all I know is I'm using a compatible driver.
There are no errorsIf a reinstall of cinnamon fixes things, the issue is probably with GNOME Shell. It somehow overwrites Cinnamon settings. To simplify your life, uninstall GNOME Shell and gdm and just install lightdm + cinnamon.
This worked, thanks for you help
Offline