LightDM shows black/frozen screen while GDM starts up just fine

romansky · 2018-03-05 05:38:54

Hi everyone,
I've been an Arch user for around 2 years and have recently been using Arch on a Dell XPS 15 9560 and started using Gnome because of its 4k support, I then tried to switch to LightDM or SDDM but both of them freeze when I start or enable them with Systemd while GDM works fine. I've looked as hard as I could but I could not find any problems that relate closely enough to mine. Any help would be appreciated!

Last edited by romansky (2018-03-26 14:25:04)

seth · 2018-03-05 09:14:16

pacman -Qs xorg

romansky · 2018-03-05 15:13:49

I currently have the xorg group installed but no progress..

jasonwryan · 2018-03-05 15:15:22

Both DM's have error logs or print to the journal. See How To Ask Questions The Smart Way.

romansky · 2018-03-05 22:00:59

That's the thing neither error logs exist nor does checking their unit with journalctl yield any messages

seth · 2018-03-05 22:03:59

Let's start with your xorg log.

jasonwryan · 2018-03-05 22:12:36

romansky wrote:

That's the thing neither error logs exist nor does checking their unit with journalctl yield any messages

Paste the commands you ran and the full output.

romansky · 2018-03-17 22:55:21

Here is my lightdm.conf

#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=lightdm-webkit2-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

My Xorg.0.log file:

[    14.689] (--) Log file renamed from "/home/billy/.local/share/xorg/Xorg.pid-1070.log" to "/home/billy/.local/share/xorg/Xorg.0.log"
[    14.690] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    14.690] X Protocol Version 11, Revision 0
[    14.690] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[    14.690] Current Operating System: Linux wromansky 4.15.6-1-ARCH #1 SMP PREEMPT Sun Feb 25 12:53:23 UTC 2018 x86_64
[    14.690] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=be237590-2f7e-49ba-a9c4-fd2338ac371c rw quiet
[    14.690] Build Date: 26 January 2018  10:25:18AM
[    14.690]  
[    14.690] Current version of pixman: 0.34.0
[    14.690] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.690] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.690] (==) Log file: "/home/billy/.local/share/xorg/Xorg.0.log", Time: Mon Mar  5 14:32:13 2018
[    14.691] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.692] (==) No Layout section.  Using the first Screen section.
[    14.692] (==) No screen section available. Using defaults.
[    14.692] (**) |-->Screen "Default Screen Section" (0)
[    14.692] (**) |   |-->Monitor "<default monitor>"
[    14.693] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.693] (==) Automatically adding devices
[    14.693] (==) Automatically enabling devices
[    14.693] (==) Automatically adding GPU devices
[    14.693] (==) Automatically binding GPU devices
[    14.693] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    14.693] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[    14.693] 	Entry deleted from font path.
[    14.693] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[    14.693] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.693] 	Entry deleted from font path.
[    14.693] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    14.693] 	Entry deleted from font path.
[    14.693] (==) FontPath set to:
	/usr/share/fonts/TTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    14.693] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.693] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.693] (II) Loader magic: 0x564c3fa03d60
[    14.693] (II) Module ABI versions:
[    14.693] 	X.Org ANSI C Emulation: 0.4
[    14.693] 	X.Org Video Driver: 23.0
[    14.693] 	X.Org XInput driver : 24.1
[    14.693] 	X.Org Server Extension : 10.0
[    14.695] (++) using VT number 2

[    14.699] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[    14.701] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.702] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    15.479] (--) PCI:*(0:0:2:0) 8086:591b:1028:07be rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    15.479] (--) PCI: (0:1:0:0) 10de:1c8d:1028:07be rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    15.479] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.479] (II) LoadModule: "glx"
[    15.479] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.480] (II) Module glx: vendor="X.Org Foundation"
[    15.480] 	compiled for 1.19.6, module version = 1.0.0
[    15.480] 	ABI class: X.Org Server Extension, version 10.0
[    15.480] (==) Matched intel as autoconfigured driver 0
[    15.480] (==) Matched intel as autoconfigured driver 1
[    15.480] (==) Matched modesetting as autoconfigured driver 2
[    15.480] (==) Matched fbdev as autoconfigured driver 3
[    15.480] (==) Matched vesa as autoconfigured driver 4
[    15.480] (==) Assigned the driver to the xf86ConfigLayout
[    15.480] (II) LoadModule: "intel"
[    15.481] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.482] (II) Module intel: vendor="X.Org Foundation"
[    15.482] 	compiled for 1.19.6, module version = 2.99.917
[    15.482] 	Module class: X.Org Video Driver
[    15.482] 	ABI class: X.Org Video Driver, version 23.0
[    15.482] (II) LoadModule: "modesetting"
[    15.482] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.482] (II) Module modesetting: vendor="X.Org Foundation"
[    15.482] 	compiled for 1.19.6, module version = 1.19.6
[    15.482] 	Module class: X.Org Video Driver
[    15.483] 	ABI class: X.Org Video Driver, version 23.0
[    15.483] (II) LoadModule: "fbdev"
[    15.483] (WW) Warning, couldn't open module fbdev
[    15.483] (II) UnloadModule: "fbdev"
[    15.483] (II) Unloading fbdev
[    15.483] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.483] (II) LoadModule: "vesa"
[    15.483] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.483] (II) Module vesa: vendor="X.Org Foundation"
[    15.483] 	compiled for 1.19.6, module version = 2.4.0
[    15.483] 	Module class: X.Org Video Driver
[    15.483] 	ABI class: X.Org Video Driver, version 23.0
[    15.483] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    15.483] (II) intel: Driver for Intel(R) HD Graphics
[    15.483] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    15.483] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    15.483] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.483] (II) VESA: driver for VESA chipsets: vesa
[    15.483] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    15.485] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023
[    15.485] (II) intel(0): SNA compiled from 2.99.917-812-g75795523
[    15.497] (WW) Falling back to old probe method for modesetting
[    15.497] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    15.497] (--) intel(0): gen9 engineering sample
[    15.497] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    15.497] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    15.497] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    15.497] (==) intel(0): RGB weight 888
[    15.497] (==) intel(0): Default visual is TrueColor
[    15.498] (II) intel(0): Output eDP1 has no monitor section
[    15.498] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    15.498] (II) intel(0): Enabled output eDP1
[    15.498] (II) intel(0): Output DP1 has no monitor section
[    15.498] (II) intel(0): Enabled output DP1
[    15.498] (II) intel(0): Output HDMI1 has no monitor section
[    15.498] (II) intel(0): Enabled output HDMI1
[    15.498] (II) intel(0): Output DP2 has no monitor section
[    15.498] (II) intel(0): Enabled output DP2
[    15.498] (II) intel(0): Output HDMI2 has no monitor section
[    15.498] (II) intel(0): Enabled output HDMI2
[    15.498] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    15.499] (II) intel(0): Output VIRTUAL1 has no monitor section
[    15.499] (II) intel(0): Enabled output VIRTUAL1
[    15.499] (--) intel(0): Output eDP1 using initial mode 3840x2160 on pipe 0
[    15.499] (==) intel(0): TearFree disabled
[    15.499] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.499] (==) intel(0): DPI set to (96, 96)
[    15.499] (II) Loading sub module "dri3"
[    15.499] (II) LoadModule: "dri3"
[    15.499] (II) Module "dri3" already built-in
[    15.499] (II) Loading sub module "dri2"
[    15.499] (II) LoadModule: "dri2"
[    15.499] (II) Module "dri2" already built-in
[    15.499] (II) Loading sub module "present"
[    15.499] (II) LoadModule: "present"
[    15.499] (II) Module "present" already built-in
[    15.499] (II) UnloadModule: "modesetting"
[    15.499] (II) Unloading modesetting
[    15.499] (II) UnloadModule: "vesa"
[    15.499] (II) Unloading vesa
[    15.499] (==) Depth 24 pixmap format is 32 bpp
[    15.501] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[    15.501] (==) intel(0): Backing store enabled
[    15.501] (==) intel(0): Silken mouse enabled
[    15.501] (II) intel(0): HW Cursor enabled
[    15.501] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.501] (==) intel(0): DPMS enabled
[    15.501] (==) intel(0): Display hotplug detection enabled
[    15.502] (II) intel(0): [DRI2] Setup complete
[    15.502] (II) intel(0): [DRI2]   DRI driver: i965
[    15.502] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    15.502] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    15.502] (II) intel(0): hardware support for Present enabled
[    15.502] (--) RandR disabled
[    15.509] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    15.509] (II) AIGLX: enabled GLX_ARB_create_context
[    15.509] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    15.509] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    15.509] (II) AIGLX: enabled GLX_INTEL_swap_event
[    15.509] (II) AIGLX: enabled GLX_SGI_swap_control
[    15.509] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    15.509] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    15.509] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    15.509] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    15.509] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    15.510] (II) AIGLX: Loaded and initialized i965
[    15.510] (II) GLX: Initialized DRI2 GL provider for screen 0
[    15.517] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    15.528] (II) intel(0): Setting screen physical size to 1016 x 571
[    15.681] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    15.681] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    15.681] (II) LoadModule: "libinput"
[    15.682] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    15.685] (II) Module libinput: vendor="X.Org Foundation"
[    15.685] 	compiled for 1.19.3, module version = 0.26.0
[    15.685] 	Module class: X.Org XInput Driver
[    15.685] 	ABI class: X.Org XInput driver, version 24.1
[    15.685] (II) Using input driver 'libinput' for 'Power Button'
[    15.687] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 22 paused 0
[    15.687] (**) Power Button: always reports core events
[    15.687] (**) Option "Device" "/dev/input/event3"
[    15.687] (**) Option "_source" "server/udev"
[    15.688] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    15.688] (II) event3  - Power Button: device is a keyboard
[    15.688] (II) event3  - Power Button: device removed
[    15.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    15.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.689] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    15.689] (II) event3  - Power Button: device is a keyboard
[    15.690] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    15.690] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    15.690] (II) Using input driver 'libinput' for 'Video Bus'
[    15.692] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 25 paused 0
[    15.692] (**) Video Bus: always reports core events
[    15.692] (**) Option "Device" "/dev/input/event10"
[    15.692] (**) Option "_source" "server/udev"
[    15.693] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    15.693] (II) event10 - Video Bus: device is a keyboard
[    15.693] (II) event10 - Video Bus: device removed
[    15.693] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10"
[    15.693] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.694] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    15.694] (II) event10 - Video Bus: device is a keyboard
[    15.695] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    15.695] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    15.695] (II) Using input driver 'libinput' for 'Video Bus'
[    15.697] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 26 paused 0
[    15.697] (**) Video Bus: always reports core events
[    15.697] (**) Option "Device" "/dev/input/event11"
[    15.697] (**) Option "_source" "server/udev"
[    15.698] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    15.698] (II) event11 - Video Bus: device is a keyboard
[    15.698] (II) event11 - Video Bus: device removed
[    15.698] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input18/event11"
[    15.698] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    15.699] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[    15.699] (II) event11 - Video Bus: device is a keyboard
[    15.700] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.700] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    15.700] (II) Using input driver 'libinput' for 'Power Button'
[    15.701] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[    15.701] (**) Power Button: always reports core events
[    15.701] (**) Option "Device" "/dev/input/event1"
[    15.701] (**) Option "_source" "server/udev"
[    15.702] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    15.703] (II) event1  - Power Button: device is a keyboard
[    15.703] (II) event1  - Power Button: device removed
[    15.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    15.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    15.704] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    15.704] (II) event1  - Power Button: device is a keyboard
[    15.705] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    15.705] (II) No input driver specified, ignoring this device.
[    15.705] (II) This device may have been added with another device file.
[    15.706] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    15.706] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    15.706] (II) Using input driver 'libinput' for 'Sleep Button'
[    15.708] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0
[    15.708] (**) Sleep Button: always reports core events
[    15.708] (**) Option "Device" "/dev/input/event2"
[    15.708] (**) Option "_source" "server/udev"
[    15.709] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    15.709] (II) event2  - Sleep Button: device is a keyboard
[    15.709] (II) event2  - Sleep Button: device removed
[    15.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    15.709] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    15.710] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    15.710] (II) event2  - Sleep Button: device is a keyboard
[    15.712] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event19)
[    15.712] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[    15.712] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[    15.714] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 29 paused 0
[    15.714] (**) Integrated_Webcam_HD: Integrate: always reports core events
[    15.714] (**) Option "Device" "/dev/input/event19"
[    15.714] (**) Option "_source" "server/udev"
[    15.715] (II) event19 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    15.715] (II) event19 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    15.715] (II) event19 - Integrated_Webcam_HD: Integrate: device removed
[    15.715] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input29/event19"
[    15.715] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 11)
[    15.716] (II) event19 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    15.716] (II) event19 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    15.718] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event18)
[    15.718] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[    15.718] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[    15.719] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 30 paused 0
[    15.719] (**) ELAN Touchscreen: always reports core events
[    15.719] (**) Option "Device" "/dev/input/event18"
[    15.719] (**) Option "_source" "server/udev"
[    15.720] (II) event18 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[    15.720] (II) event18 - ELAN Touchscreen: device is a touch device
[    15.721] (II) event18 - ELAN Touchscreen: device removed
[    15.721] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04F3:24A1.0002/input/input25/event18"
[    15.721] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 12)
[    15.721] (**) Option "AccelerationScheme" "none"
[    15.721] (**) ELAN Touchscreen: (accel) selected scheme none/0
[    15.721] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[    15.721] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[    15.722] (II) event18 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[    15.722] (II) event18 - ELAN Touchscreen: device is a touch device
[    15.723] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[    15.723] (II) No input driver specified, ignoring this device.
[    15.723] (II) This device may have been added with another device file.
[    15.724] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/event9)
[    15.724] (**) DLL07BE:01 06CB:7A13 Touchpad: Applying InputClass "libinput touchpad catchall"
[    15.725] (II) Using input driver 'libinput' for 'DLL07BE:01 06CB:7A13 Touchpad'
[    15.726] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 31 paused 0
[    15.726] (**) DLL07BE:01 06CB:7A13 Touchpad: always reports core events
[    15.726] (**) Option "Device" "/dev/input/event9"
[    15.726] (**) Option "_source" "server/udev"
[    15.728] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[    15.728] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[    15.728] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: device removed
[    15.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input13/event9"
[    15.728] (II) XINPUT: Adding extended input device "DLL07BE:01 06CB:7A13 Touchpad" (type: TOUCHPAD, id 13)
[    15.728] (**) Option "AccelerationScheme" "none"
[    15.728] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) selected scheme none/0
[    15.728] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration factor: 2.000
[    15.728] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration threshold: 4
[    15.729] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[    15.729] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[    15.730] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/mouse0)
[    15.731] (II) No input driver specified, ignoring this device.
[    15.731] (II) This device may have been added with another device file.
[    15.731] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[    15.731] (II) No input driver specified, ignoring this device.
[    15.731] (II) This device may have been added with another device file.
[    15.732] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    15.732] (II) No input driver specified, ignoring this device.
[    15.732] (II) This device may have been added with another device file.
[    15.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    15.733] (II) No input driver specified, ignoring this device.
[    15.733] (II) This device may have been added with another device file.
[    15.733] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    15.733] (II) No input driver specified, ignoring this device.
[    15.733] (II) This device may have been added with another device file.
[    15.734] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[    15.734] (II) No input driver specified, ignoring this device.
[    15.734] (II) This device may have been added with another device file.
[    15.735] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[    15.735] (II) No input driver specified, ignoring this device.
[    15.735] (II) This device may have been added with another device file.
[    15.736] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[    15.736] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    15.736] (II) Using input driver 'libinput' for 'Intel HID events'
[    15.737] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[    15.737] (**) Intel HID events: always reports core events
[    15.737] (**) Option "Device" "/dev/input/event5"
[    15.737] (**) Option "_source" "server/udev"
[    15.738] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    15.738] (II) event5  - Intel HID events: device is a keyboard
[    15.738] (II) event5  - Intel HID events: device removed
[    15.738] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event5"
[    15.738] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[    15.739] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    15.739] (II) event5  - Intel HID events: device is a keyboard
[    15.740] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[    15.740] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    15.740] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    15.742] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 33 paused 0
[    15.742] (**) Intel HID 5 button array: always reports core events
[    15.742] (**) Option "Device" "/dev/input/event6"
[    15.742] (**) Option "_source" "server/udev"
[    15.743] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[    15.743] (II) event6  - Intel HID 5 button array: device is a keyboard
[    15.743] (II) event6  - Intel HID 5 button array: device removed
[    15.743] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input7/event6"
[    15.743] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 15)
[    15.744] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[    15.744] (II) event6  - Intel HID 5 button array: device is a keyboard
[    15.745] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[    15.745] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    15.745] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    15.747] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0
[    15.747] (**) Dell WMI hotkeys: always reports core events
[    15.747] (**) Option "Device" "/dev/input/event8"
[    15.747] (**) Option "_source" "server/udev"
[    15.748] (II) event8  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    15.748] (II) event8  - Dell WMI hotkeys: device is a keyboard
[    15.748] (II) event8  - Dell WMI hotkeys: device removed
[    15.748] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10/event8"
[    15.748] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[    15.749] (II) event8  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    15.749] (II) event8  - Dell WMI hotkeys: device is a keyboard
[    15.750] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    15.750] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    15.750] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    15.752] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 35 paused 0
[    15.752] (**) AT Translated Set 2 keyboard: always reports core events
[    15.752] (**) Option "Device" "/dev/input/event4"
[    15.752] (**) Option "_source" "server/udev"
[    15.753] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.753] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    15.753] (II) event4  - AT Translated Set 2 keyboard: device removed
[    15.753] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    15.753] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    15.754] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.754] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    15.755] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    15.755] (II) No input driver specified, ignoring this device.
[    15.755] (II) This device may have been added with another device file.
[    17.500] (II) intel(0): EDID vendor "SHP", prod id 5238
[    17.500] (II) intel(0): Printing DDC gathered Modelines:
[    17.500] (II) intel(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)
[    33.748] (**) Option "fd" "22"
[    33.748] (II) event3  - Power Button: device removed
[    33.748] (**) Option "fd" "25"
[    33.748] (II) event10 - Video Bus: device removed
[    33.748] (**) Option "fd" "26"
[    33.748] (II) event11 - Video Bus: device removed
[    33.749] (**) Option "fd" "27"
[    33.749] (II) event1  - Power Button: device removed
[    33.749] (**) Option "fd" "28"
[    33.749] (II) event2  - Sleep Button: device removed
[    33.749] (**) Option "fd" "29"
[    33.749] (II) event19 - Integrated_Webcam_HD: Integrate: device removed
[    33.749] (**) Option "fd" "30"
[    33.749] (II) event18 - ELAN Touchscreen: device removed
[    33.749] (**) Option "fd" "31"
[    33.749] (II) event9  - DLL07BE:01 06CB:7A13 Touchpad: device removed
[    33.749] (**) Option "fd" "32"
[    33.749] (II) event5  - Intel HID events: device removed
[    33.749] (**) Option "fd" "33"
[    33.749] (II) event6  - Intel HID 5 button array: device removed
[    33.750] (**) Option "fd" "34"
[    33.750] (II) event8  - Dell WMI hotkeys: device removed
[    33.750] (**) Option "fd" "35"
[    33.750] (II) event4  - AT Translated Set 2 keyboard: device removed
[    33.751] (II) UnloadModule: "libinput"
[    33.751] (II) systemd-logind: releasing fd for 13:68
[    33.758] (II) UnloadModule: "libinput"
[    33.758] (II) systemd-logind: releasing fd for 13:72
[    33.776] (II) UnloadModule: "libinput"
[    33.776] (II) systemd-logind: releasing fd for 13:70
[    33.784] (II) UnloadModule: "libinput"
[    33.784] (II) systemd-logind: releasing fd for 13:69
[    33.791] (II) UnloadModule: "libinput"
[    33.791] (II) systemd-logind: releasing fd for 13:73
[    33.816] (II) UnloadModule: "libinput"
[    33.816] (II) systemd-logind: releasing fd for 13:82
[    33.843] (II) UnloadModule: "libinput"
[    33.843] (II) systemd-logind: releasing fd for 13:83
[    33.865] (II) UnloadModule: "libinput"
[    33.865] (II) systemd-logind: releasing fd for 13:66
[    33.879] (II) UnloadModule: "libinput"
[    33.879] (II) systemd-logind: releasing fd for 13:65
[    33.891] (II) UnloadModule: "libinput"
[    33.891] (II) systemd-logind: releasing fd for 13:75
[    33.911] (II) UnloadModule: "libinput"
[    33.911] (II) systemd-logind: releasing fd for 13:74
[    33.936] (II) UnloadModule: "libinput"
[    33.936] (II) systemd-logind: releasing fd for 13:67
[    34.021] (II) Server terminated successfully (0). Closing log file.

My Xorg.0.log.old file:

[   158.280] (--) Log file renamed from "/home/billy/.local/share/xorg/Xorg.pid-1031.log" to "/home/billy/.local/share/xorg/Xorg.0.log"
[   158.281] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   158.281] X Protocol Version 11, Revision 0
[   158.281] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[   158.281] Current Operating System: Linux wromansky 4.15.6-1-ARCH #1 SMP PREEMPT Sun Feb 25 12:53:23 UTC 2018 x86_64
[   158.281] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=be237590-2f7e-49ba-a9c4-fd2338ac371c rw quiet
[   158.281] Build Date: 26 January 2018  10:25:18AM
[   158.281]  
[   158.281] Current version of pixman: 0.34.0
[   158.281] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   158.281] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   158.281] (==) Log file: "/home/billy/.local/share/xorg/Xorg.0.log", Time: Mon Mar  5 13:56:36 2018
[   158.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   158.282] (==) No Layout section.  Using the first Screen section.
[   158.282] (==) No screen section available. Using defaults.
[   158.282] (**) |-->Screen "Default Screen Section" (0)
[   158.282] (**) |   |-->Monitor "<default monitor>"
[   158.283] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   158.283] (==) Automatically adding devices
[   158.283] (==) Automatically enabling devices
[   158.283] (==) Automatically adding GPU devices
[   158.283] (==) Automatically binding GPU devices
[   158.283] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   158.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[   158.284] 	Entry deleted from font path.
[   158.284] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[   158.284] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   158.284] 	Entry deleted from font path.
[   158.284] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   158.284] 	Entry deleted from font path.
[   158.284] (==) FontPath set to:
	/usr/share/fonts/TTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   158.284] (==) ModulePath set to "/usr/lib/xorg/modules"
[   158.284] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   158.284] (II) Loader magic: 0x55a18e33fd60
[   158.284] (II) Module ABI versions:
[   158.284] 	X.Org ANSI C Emulation: 0.4
[   158.284] 	X.Org Video Driver: 23.0
[   158.284] 	X.Org XInput driver : 24.1
[   158.284] 	X.Org Server Extension : 10.0
[   158.286] (++) using VT number 2

[   158.290] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[   158.292] (II) xfree86: Adding drm device (/dev/dri/card0)
[   158.293] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[   159.070] (--) PCI:*(0:0:2:0) 8086:591b:1028:07be rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   159.070] (--) PCI: (0:1:0:0) 10de:1c8d:1028:07be rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   159.070] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   159.070] (II) LoadModule: "glx"
[   159.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   159.072] (II) Module glx: vendor="X.Org Foundation"
[   159.072] 	compiled for 1.19.6, module version = 1.0.0
[   159.072] 	ABI class: X.Org Server Extension, version 10.0
[   159.072] (==) Matched intel as autoconfigured driver 0
[   159.072] (==) Matched intel as autoconfigured driver 1
[   159.072] (==) Matched modesetting as autoconfigured driver 2
[   159.072] (==) Matched fbdev as autoconfigured driver 3
[   159.072] (==) Matched vesa as autoconfigured driver 4
[   159.072] (==) Assigned the driver to the xf86ConfigLayout
[   159.072] (II) LoadModule: "intel"
[   159.072] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   159.073] (II) Module intel: vendor="X.Org Foundation"
[   159.073] 	compiled for 1.19.6, module version = 2.99.917
[   159.073] 	Module class: X.Org Video Driver
[   159.073] 	ABI class: X.Org Video Driver, version 23.0
[   159.073] (II) LoadModule: "modesetting"
[   159.073] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   159.074] (II) Module modesetting: vendor="X.Org Foundation"
[   159.074] 	compiled for 1.19.6, module version = 1.19.6
[   159.074] 	Module class: X.Org Video Driver
[   159.074] 	ABI class: X.Org Video Driver, version 23.0
[   159.074] (II) LoadModule: "fbdev"
[   159.074] (WW) Warning, couldn't open module fbdev
[   159.074] (II) UnloadModule: "fbdev"
[   159.074] (II) Unloading fbdev
[   159.074] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   159.074] (II) LoadModule: "vesa"
[   159.074] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   159.074] (II) Module vesa: vendor="X.Org Foundation"
[   159.074] 	compiled for 1.19.6, module version = 2.4.0
[   159.074] 	Module class: X.Org Video Driver
[   159.074] 	ABI class: X.Org Video Driver, version 23.0
[   159.074] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   159.075] (II) intel: Driver for Intel(R) HD Graphics
[   159.075] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   159.075] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   159.075] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   159.075] (II) VESA: driver for VESA chipsets: vesa
[   159.075] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   159.075] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023
[   159.075] (II) intel(0): SNA compiled from 2.99.917-812-g75795523
[   159.088] (WW) Falling back to old probe method for modesetting
[   159.088] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   159.089] (--) intel(0): gen9 engineering sample
[   159.089] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[   159.089] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   159.089] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   159.089] (==) intel(0): RGB weight 888
[   159.089] (==) intel(0): Default visual is TrueColor
[   159.089] (II) intel(0): Output eDP1 has no monitor section
[   159.090] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[   159.090] (II) intel(0): Enabled output eDP1
[   159.090] (II) intel(0): Output DP1 has no monitor section
[   159.090] (II) intel(0): Enabled output DP1
[   159.090] (II) intel(0): Output HDMI1 has no monitor section
[   159.090] (II) intel(0): Enabled output HDMI1
[   159.090] (II) intel(0): Output DP2 has no monitor section
[   159.090] (II) intel(0): Enabled output DP2
[   159.090] (II) intel(0): Output HDMI2 has no monitor section
[   159.090] (II) intel(0): Enabled output HDMI2
[   159.090] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   159.090] (II) intel(0): Output VIRTUAL1 has no monitor section
[   159.090] (II) intel(0): Enabled output VIRTUAL1
[   159.090] (--) intel(0): Output eDP1 using initial mode 3840x2160 on pipe 0
[   159.090] (==) intel(0): TearFree disabled
[   159.090] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   159.090] (==) intel(0): DPI set to (96, 96)
[   159.090] (II) Loading sub module "dri3"
[   159.090] (II) LoadModule: "dri3"
[   159.090] (II) Module "dri3" already built-in
[   159.090] (II) Loading sub module "dri2"
[   159.090] (II) LoadModule: "dri2"
[   159.090] (II) Module "dri2" already built-in
[   159.090] (II) Loading sub module "present"
[   159.090] (II) LoadModule: "present"
[   159.091] (II) Module "present" already built-in
[   159.091] (II) UnloadModule: "modesetting"
[   159.091] (II) Unloading modesetting
[   159.091] (II) UnloadModule: "vesa"
[   159.091] (II) Unloading vesa
[   159.091] (==) Depth 24 pixmap format is 32 bpp
[   159.092] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[   159.092] (==) intel(0): Backing store enabled
[   159.092] (==) intel(0): Silken mouse enabled
[   159.093] (II) intel(0): HW Cursor enabled
[   159.093] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   159.093] (==) intel(0): DPMS enabled
[   159.093] (==) intel(0): Display hotplug detection enabled
[   159.093] (II) intel(0): [DRI2] Setup complete
[   159.093] (II) intel(0): [DRI2]   DRI driver: i965
[   159.093] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   159.093] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[   159.093] (II) intel(0): hardware support for Present enabled
[   159.093] (--) RandR disabled
[   159.101] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   159.101] (II) AIGLX: enabled GLX_ARB_create_context
[   159.101] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   159.101] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   159.101] (II) AIGLX: enabled GLX_INTEL_swap_event
[   159.101] (II) AIGLX: enabled GLX_SGI_swap_control
[   159.101] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   159.101] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   159.101] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   159.101] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   159.101] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   159.101] (II) AIGLX: Loaded and initialized i965
[   159.101] (II) GLX: Initialized DRI2 GL provider for screen 0
[   159.108] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[   159.118] (II) intel(0): Setting screen physical size to 1016 x 571
[   159.167] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   159.167] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   159.167] (II) LoadModule: "libinput"
[   159.168] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   159.169] (II) Module libinput: vendor="X.Org Foundation"
[   159.169] 	compiled for 1.19.3, module version = 0.26.0
[   159.169] 	Module class: X.Org XInput Driver
[   159.169] 	ABI class: X.Org XInput driver, version 24.1
[   159.169] (II) Using input driver 'libinput' for 'Power Button'
[   159.170] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 22 paused 0
[   159.170] (**) Power Button: always reports core events
[   159.170] (**) Option "Device" "/dev/input/event3"
[   159.170] (**) Option "_source" "server/udev"
[   159.170] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   159.170] (II) event3  - Power Button: device is a keyboard
[   159.170] (II) event3  - Power Button: device removed
[   159.170] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   159.170] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   159.171] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   159.171] (II) event3  - Power Button: device is a keyboard
[   159.171] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   159.171] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   159.171] (II) Using input driver 'libinput' for 'Video Bus'
[   159.172] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0
[   159.172] (**) Video Bus: always reports core events
[   159.172] (**) Option "Device" "/dev/input/event5"
[   159.172] (**) Option "_source" "server/udev"
[   159.172] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[   159.172] (II) event5  - Video Bus: device is a keyboard
[   159.172] (II) event5  - Video Bus: device removed
[   159.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[   159.172] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   159.173] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[   159.173] (II) event5  - Video Bus: device is a keyboard
[   159.173] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   159.173] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   159.173] (II) Using input driver 'libinput' for 'Video Bus'
[   159.174] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0
[   159.174] (**) Video Bus: always reports core events
[   159.174] (**) Option "Device" "/dev/input/event6"
[   159.174] (**) Option "_source" "server/udev"
[   159.175] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[   159.175] (II) event6  - Video Bus: device is a keyboard
[   159.175] (II) event6  - Video Bus: device removed
[   159.175] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input7/event6"
[   159.175] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   159.175] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[   159.175] (II) event6  - Video Bus: device is a keyboard
[   159.176] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   159.176] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   159.176] (II) Using input driver 'libinput' for 'Power Button'
[   159.176] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[   159.176] (**) Power Button: always reports core events
[   159.176] (**) Option "Device" "/dev/input/event1"
[   159.176] (**) Option "_source" "server/udev"
[   159.177] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   159.177] (II) event1  - Power Button: device is a keyboard
[   159.177] (II) event1  - Power Button: device removed
[   159.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   159.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   159.178] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   159.178] (II) event1  - Power Button: device is a keyboard
[   159.178] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   159.178] (II) No input driver specified, ignoring this device.
[   159.178] (II) This device may have been added with another device file.
[   159.178] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   159.178] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   159.178] (II) Using input driver 'libinput' for 'Sleep Button'
[   159.179] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0
[   159.179] (**) Sleep Button: always reports core events
[   159.179] (**) Option "Device" "/dev/input/event2"
[   159.179] (**) Option "_source" "server/udev"
[   159.179] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[   159.179] (II) event2  - Sleep Button: device is a keyboard
[   159.179] (II) event2  - Sleep Button: device removed
[   159.179] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[   159.179] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[   159.180] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[   159.180] (II) event2  - Sleep Button: device is a keyboard
[   159.181] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event19)
[   159.181] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[   159.181] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[   159.182] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 29 paused 0
[   159.182] (**) Integrated_Webcam_HD: Integrate: always reports core events
[   159.182] (**) Option "Device" "/dev/input/event19"
[   159.182] (**) Option "_source" "server/udev"
[   159.183] (II) event19 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[   159.183] (II) event19 - Integrated_Webcam_HD: Integrate: device is a keyboard
[   159.183] (II) event19 - Integrated_Webcam_HD: Integrate: device removed
[   159.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input29/event19"
[   159.183] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 11)
[   159.183] (II) event19 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[   159.183] (II) event19 - Integrated_Webcam_HD: Integrate: device is a keyboard
[   159.184] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event17)
[   159.184] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[   159.184] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[   159.185] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 30 paused 0
[   159.185] (**) ELAN Touchscreen: always reports core events
[   159.185] (**) Option "Device" "/dev/input/event17"
[   159.185] (**) Option "_source" "server/udev"
[   159.185] (II) event17 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[   159.186] (II) event17 - ELAN Touchscreen: device is a touch device
[   159.186] (II) event17 - ELAN Touchscreen: device removed
[   159.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04F3:24A1.0002/input/input24/event17"
[   159.186] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 12)
[   159.186] (**) Option "AccelerationScheme" "none"
[   159.186] (**) ELAN Touchscreen: (accel) selected scheme none/0
[   159.186] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[   159.186] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[   159.186] (II) event17 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[   159.186] (II) event17 - ELAN Touchscreen: device is a touch device
[   159.187] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[   159.187] (II) No input driver specified, ignoring this device.
[   159.187] (II) This device may have been added with another device file.
[   159.188] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/event16)
[   159.188] (**) DLL07BE:01 06CB:7A13 Touchpad: Applying InputClass "libinput touchpad catchall"
[   159.188] (II) Using input driver 'libinput' for 'DLL07BE:01 06CB:7A13 Touchpad'
[   159.279] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 31 paused 0
[   159.279] (**) DLL07BE:01 06CB:7A13 Touchpad: always reports core events
[   159.280] (**) Option "Device" "/dev/input/event16"
[   159.280] (**) Option "_source" "server/udev"
[   159.281] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[   159.281] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[   159.281] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: device removed
[   159.281] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input19/event16"
[   159.281] (II) XINPUT: Adding extended input device "DLL07BE:01 06CB:7A13 Touchpad" (type: TOUCHPAD, id 13)
[   159.281] (**) Option "AccelerationScheme" "none"
[   159.281] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) selected scheme none/0
[   159.281] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration factor: 2.000
[   159.281] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration threshold: 4
[   159.282] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[   159.282] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[   159.284] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/mouse0)
[   159.284] (II) No input driver specified, ignoring this device.
[   159.284] (II) This device may have been added with another device file.
[   159.284] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[   159.284] (II) No input driver specified, ignoring this device.
[   159.284] (II) This device may have been added with another device file.
[   159.285] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
[   159.285] (II) No input driver specified, ignoring this device.
[   159.285] (II) This device may have been added with another device file.
[   159.286] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event11)
[   159.286] (II) No input driver specified, ignoring this device.
[   159.286] (II) This device may have been added with another device file.
[   159.286] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event12)
[   159.287] (II) No input driver specified, ignoring this device.
[   159.287] (II) This device may have been added with another device file.
[   159.287] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event7)
[   159.287] (II) No input driver specified, ignoring this device.
[   159.287] (II) This device may have been added with another device file.
[   159.288] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[   159.288] (II) No input driver specified, ignoring this device.
[   159.288] (II) This device may have been added with another device file.
[   159.289] (II) config/udev: Adding input device Intel HID events (/dev/input/event13)
[   159.289] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[   159.289] (II) Using input driver 'libinput' for 'Intel HID events'
[   159.290] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 32 paused 0
[   159.291] (**) Intel HID events: always reports core events
[   159.291] (**) Option "Device" "/dev/input/event13"
[   159.291] (**) Option "_source" "server/udev"
[   159.291] (II) event13 - Intel HID events: is tagged by udev as: Keyboard
[   159.291] (II) event13 - Intel HID events: device is a keyboard
[   159.291] (II) event13 - Intel HID events: device removed
[   159.292] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input15/event13"
[   159.292] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[   159.293] (II) event13 - Intel HID events: is tagged by udev as: Keyboard
[   159.293] (II) event13 - Intel HID events: device is a keyboard
[   159.294] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event14)
[   159.294] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[   159.294] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[   159.295] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 33 paused 0
[   159.295] (**) Intel HID 5 button array: always reports core events
[   159.295] (**) Option "Device" "/dev/input/event14"
[   159.295] (**) Option "_source" "server/udev"
[   159.296] (II) event14 - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[   159.296] (II) event14 - Intel HID 5 button array: device is a keyboard
[   159.296] (II) event14 - Intel HID 5 button array: device removed
[   159.296] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input16/event14"
[   159.296] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 15)
[   159.297] (II) event14 - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[   159.297] (II) event14 - Intel HID 5 button array: device is a keyboard
[   159.298] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event18)
[   159.299] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   159.299] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[   159.300] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 34 paused 0
[   159.300] (**) Dell WMI hotkeys: always reports core events
[   159.300] (**) Option "Device" "/dev/input/event18"
[   159.300] (**) Option "_source" "server/udev"
[   159.301] (II) event18 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[   159.301] (II) event18 - Dell WMI hotkeys: device is a keyboard
[   159.301] (II) event18 - Dell WMI hotkeys: device removed
[   159.301] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input28/event18"
[   159.301] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[   159.302] (II) event18 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[   159.303] (II) event18 - Dell WMI hotkeys: device is a keyboard
[   159.304] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   159.304] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   159.304] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   159.305] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 35 paused 0
[   159.305] (**) AT Translated Set 2 keyboard: always reports core events
[   159.305] (**) Option "Device" "/dev/input/event4"
[   159.305] (**) Option "_source" "server/udev"
[   159.306] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   159.306] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   159.306] (II) event4  - AT Translated Set 2 keyboard: device removed
[   159.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   159.306] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[   159.308] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   159.308] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   159.308] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[   159.308] (II) No input driver specified, ignoring this device.
[   159.308] (II) This device may have been added with another device file.
[   161.093] (II) intel(0): EDID vendor "SHP", prod id 5238
[   161.093] (II) intel(0): Printing DDC gathered Modelines:
[   161.093] (II) intel(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)
[   179.599] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[   183.866] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[   606.936] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[   698.926] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[   761.508] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[   955.183] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[  1441.021] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[  1684.565] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[  1974.868] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[  2096.329] (EE) event16 - DLL07BE:01 06CB:7A13 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.10.1/touchpad_jumping_cursor.html for details
[  2260.808] (**) Option "fd" "22"
[  2260.808] (II) event3  - Power Button: device removed
[  2260.808] (**) Option "fd" "25"
[  2260.808] (II) event5  - Video Bus: device removed
[  2260.808] (**) Option "fd" "26"
[  2260.808] (II) event6  - Video Bus: device removed
[  2260.809] (**) Option "fd" "27"
[  2260.809] (II) event1  - Power Button: device removed
[  2260.809] (**) Option "fd" "28"
[  2260.809] (II) event2  - Sleep Button: device removed
[  2260.809] (**) Option "fd" "29"
[  2260.809] (II) event19 - Integrated_Webcam_HD: Integrate: device removed
[  2260.809] (**) Option "fd" "30"
[  2260.809] (II) event17 - ELAN Touchscreen: device removed
[  2260.809] (**) Option "fd" "31"
[  2260.809] (II) event16 - DLL07BE:01 06CB:7A13 Touchpad: device removed
[  2260.809] (**) Option "fd" "32"
[  2260.809] (II) event13 - Intel HID events: device removed
[  2260.809] (**) Option "fd" "33"
[  2260.809] (II) event14 - Intel HID 5 button array: device removed
[  2260.809] (**) Option "fd" "34"
[  2260.809] (II) event18 - Dell WMI hotkeys: device removed
[  2260.809] (**) Option "fd" "35"
[  2260.809] (II) event4  - AT Translated Set 2 keyboard: device removed
[  2260.810] (II) UnloadModule: "libinput"
[  2260.810] (II) systemd-logind: releasing fd for 13:68
[  2260.817] (II) UnloadModule: "libinput"
[  2260.817] (II) systemd-logind: releasing fd for 13:82
[  2260.817] (II) UnloadModule: "libinput"
[  2260.817] (II) systemd-logind: releasing fd for 13:78
[  2260.818] (II) UnloadModule: "libinput"
[  2260.818] (II) systemd-logind: releasing fd for 13:77
[  2260.818] (II) UnloadModule: "libinput"
[  2260.818] (II) systemd-logind: releasing fd for 13:80
[  2260.818] (II) UnloadModule: "libinput"
[  2260.818] (II) systemd-logind: releasing fd for 13:81
[  2260.819] (II) UnloadModule: "libinput"
[  2260.819] (II) systemd-logind: releasing fd for 13:83
[  2260.819] (II) UnloadModule: "libinput"
[  2260.819] (II) systemd-logind: releasing fd for 13:66
[  2260.819] (II) UnloadModule: "libinput"
[  2260.819] (II) systemd-logind: releasing fd for 13:65
[  2260.820] (II) UnloadModule: "libinput"
[  2260.820] (II) systemd-logind: releasing fd for 13:70
[  2260.820] (II) UnloadModule: "libinput"
[  2260.820] (II) systemd-logind: releasing fd for 13:69
[  2260.821] (II) UnloadModule: "libinput"
[  2260.821] (II) systemd-logind: releasing fd for 13:67
[  2260.826] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  2260.826] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  2260.826] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[  2260.888] (II) Server terminated successfully (0). Closing log file.

My lightdm.log file:

[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.01s] DEBUG: Starting Light Display Manager 1.24.1, UID=0 PID=1878
[+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.02s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.02s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.02s] DEBUG: Using Xephyr for X servers
[+0.02s] DEBUG: Registered seat module local
[+0.02s] DEBUG: Registered seat module xremote
[+0.03s] DEBUG: Registered seat module unity
[+0.03s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.74s] DEBUG: Monitoring logind for seats
[+0.74s] DEBUG: New seat added from logind: seat0
[+0.77s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.77s] DEBUG: Seat seat0: Starting
[+0.78s] DEBUG: Seat seat0: Creating greeter session
[+0.82s] DEBUG: Seat seat0: Creating display server of type x
[+0.87s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.87s] DEBUG: Using VT 7
[+0.87s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.89s] DEBUG: XServer 1: Logging to /var/log/lightdm/x-1.log
[+0.89s] DEBUG: XServer 1: Writing X server authority to /run/lightdm/root/:1
[+0.90s] DEBUG: XServer 1: Launching X Server
[+0.90s] DEBUG: Launching process 1883: /usr/bin/Xephyr :1 -seat seat0 -auth /run/lightdm/root/:1 -nolisten tcp vt7 -novtswitch
[+0.90s] DEBUG: XServer 1: Waiting for ready signal from X server :1
[+0.91s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.95s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.98s] DEBUG: Process 1883 exited with return value 1
[+0.98s] DEBUG: XServer 1: X server stopped
[+0.98s] DEBUG: Releasing VT 7
[+0.98s] DEBUG: XServer 1: Removing X server authority /run/lightdm/root/:1
[+0.98s] DEBUG: Seat seat0: Display server stopped
[+0.99s] DEBUG: Seat seat0: Stopping session
[+0.99s] DEBUG: Seat seat0: Session stopped
[+0.99s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+0.99s] DEBUG: Seat seat0: Stopping; greeter display server failed to start
[+0.99s] DEBUG: Seat seat0: Stopping
[+1.00s] DEBUG: Seat seat0: Stopped
[+1.00s] DEBUG: Required seat has stopped
[+1.00s] DEBUG: Stopping display manager
[+1.00s] DEBUG: Display manager stopped
[+1.00s] DEBUG: Stopping daemon

Checking the unit with journalctl:

$ journalctl -u lightdm
-- Logs begin at Fri 2018-02-23 10:15:33 EST, end at Sat 2018-03-17 18:50:43 >
-- No entries --

romansky · 2018-03-18 04:50:49

Update: LightDM now throws an error code on systemctl start

My lightdm.log file now shows

[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.24.1, UID=0 PID=1783
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Registered seat module unity
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Monitoring logind for seats
[+0.00s] DEBUG: New seat added from logind: seat0
[+0.00s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.00s] DEBUG: Seat seat0: Starting
[+0.00s] DEBUG: Seat seat0: Creating greeter session
[+0.00s] DEBUG: Seat seat0: Failed to find session configuration lightdm-webkit2-greeter
[+0.00s] DEBUG: Seat seat0: Failed to create greeter session
[+0.00s] DEBUG: Failed to start seat: seat0

romansky · 2018-03-24 01:05:02

Not bumping but could someone perhaps point me in the right direction? Any thread or wiki link would be much appreciated.

loqs · 2018-03-24 02:00:50

greeter-session=lightdm-webkit2-greeter

[+0.00s] DEBUG: Seat seat0: Failed to find session configuration lightdm-webkit2-greeter

Did you install the lightdm-webkit2-greeter from AUR? Is there a desktop entry for it in /usr/share/xgreeters/ ? Before you changed the configuration to use the lightdm-webkit2-greeter did the lightdm-gtk-greeter work?
If you use startx instead of a DM does that work?

romansky · 2018-03-24 03:27:30

Yes, I have both greeters installed. Both greeters have entries in /usr/share/xgreeters/ . The difference between the two in results is that when I use the gtk greeter my system hangs but when I use the webkit greeter I get a blinking cursor and am able to go into tty2. If I use startx I get a simple xorg-twm setup.

Last edited by romansky (2018-03-24 03:31:37)

seth · 2018-03-24 07:32:54

The webkit2 greeter doesn't work at all. As for the gtk greeter and the "hang", try to remove xf86-video-intel.

romansky · 2018-03-24 19:52:39

I removed xf86-video-intel and still get the same result. My lightdm error log has not updated and are still the same as earlier in the thread. I believe it may have something to do with my xinitrc??

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login

Also, here is my new Xorg.0.log file from ~/.local/share

[    42.319] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    42.319] X Protocol Version 11, Revision 0
[    42.319] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[    42.319] Current Operating System: Linux wromansky 4.15.11-1-ARCH #1 SMP PREEMPT Mon Mar 19 18:21:03 UTC 2018 x86_64
[    42.319] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=be237590-2f7e-49ba-a9c4-fd2338ac371c rw quiet
[    42.319] Build Date: 26 January 2018  10:25:18AM
[    42.319]  
[    42.319] Current version of pixman: 0.34.0
[    42.319] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    42.319] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    42.319] (==) Log file: "/home/billy/.local/share/xorg/Xorg.0.log", Time: Sat Mar 24 11:56:39 2018
[    42.321] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    42.321] (==) No Layout section.  Using the first Screen section.
[    42.321] (==) No screen section available. Using defaults.
[    42.321] (**) |-->Screen "Default Screen Section" (0)
[    42.321] (**) |   |-->Monitor "<default monitor>"
[    42.322] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    42.322] (==) Automatically adding devices
[    42.322] (==) Automatically enabling devices
[    42.322] (==) Automatically adding GPU devices
[    42.322] (==) Automatically binding GPU devices
[    42.322] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    42.323] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[    42.323] 	Entry deleted from font path.
[    42.323] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[    42.325] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    42.325] 	Entry deleted from font path.
[    42.325] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    42.325] 	Entry deleted from font path.
[    42.326] (==) FontPath set to:
	/usr/share/fonts/TTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    42.326] (==) ModulePath set to "/usr/lib/xorg/modules"
[    42.326] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    42.326] (II) Loader magic: 0x55c570d2cd60
[    42.326] (II) Module ABI versions:
[    42.326] 	X.Org ANSI C Emulation: 0.4
[    42.326] 	X.Org Video Driver: 23.0
[    42.326] 	X.Org XInput driver : 24.1
[    42.326] 	X.Org Server Extension : 10.0
[    42.326] (++) using VT number 1

[    42.328] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    42.328] (II) xfree86: Adding drm device (/dev/dri/card0)
[    42.328] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    43.101] (--) PCI:*(0:0:2:0) 8086:591b:1028:07be rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    43.101] (--) PCI: (0:1:0:0) 10de:1c8d:1028:07be rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    43.101] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    43.101] (II) LoadModule: "glx"
[    43.103] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    43.108] (II) Module glx: vendor="X.Org Foundation"
[    43.108] 	compiled for 1.19.6, module version = 1.0.0
[    43.108] 	ABI class: X.Org Server Extension, version 10.0
[    43.108] (==) Matched intel as autoconfigured driver 0
[    43.108] (==) Matched intel as autoconfigured driver 1
[    43.108] (==) Matched modesetting as autoconfigured driver 2
[    43.108] (==) Matched fbdev as autoconfigured driver 3
[    43.108] (==) Matched vesa as autoconfigured driver 4
[    43.108] (==) Assigned the driver to the xf86ConfigLayout
[    43.108] (II) LoadModule: "intel"
[    43.108] (WW) Warning, couldn't open module intel
[    43.108] (II) UnloadModule: "intel"
[    43.108] (II) Unloading intel
[    43.108] (EE) Failed to load module "intel" (module does not exist, 0)
[    43.108] (II) LoadModule: "modesetting"
[    43.108] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    43.109] (II) Module modesetting: vendor="X.Org Foundation"
[    43.109] 	compiled for 1.19.6, module version = 1.19.6
[    43.109] 	Module class: X.Org Video Driver
[    43.109] 	ABI class: X.Org Video Driver, version 23.0
[    43.109] (II) LoadModule: "fbdev"
[    43.109] (WW) Warning, couldn't open module fbdev
[    43.109] (II) UnloadModule: "fbdev"
[    43.109] (II) Unloading fbdev
[    43.109] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    43.109] (II) LoadModule: "vesa"
[    43.109] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    43.109] (II) Module vesa: vendor="X.Org Foundation"
[    43.109] 	compiled for 1.19.6, module version = 2.4.0
[    43.109] 	Module class: X.Org Video Driver
[    43.109] 	ABI class: X.Org Video Driver, version 23.0
[    43.109] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    43.109] (II) VESA: driver for VESA chipsets: vesa
[    43.109] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    43.109] (II) modeset(0): using drv /dev/dri/card0
[    43.109] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    43.109] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    43.109] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    43.109] (==) modeset(0): RGB weight 888
[    43.109] (==) modeset(0): Default visual is TrueColor
[    43.109] (II) Loading sub module "glamoregl"
[    43.109] (II) LoadModule: "glamoregl"
[    43.109] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    43.113] (II) Module glamoregl: vendor="X.Org Foundation"
[    43.113] 	compiled for 1.19.6, module version = 1.0.0
[    43.113] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    43.113] (II) glamor: OpenGL accelerated X.org driver based.
[    43.135] (II) glamor: EGL version 1.4 (DRI2):
[    43.141] (II) modeset(0): glamor initialized
[    43.205] (II) modeset(0): Output eDP-1 has no monitor section
[    43.205] (II) modeset(0): Output DP-1 has no monitor section
[    43.217] (II) modeset(0): Output HDMI-1 has no monitor section
[    43.217] (II) modeset(0): Output DP-2 has no monitor section
[    43.228] (II) modeset(0): Output HDMI-2 has no monitor section
[    43.286] (II) modeset(0): EDID for output eDP-1
[    43.286] (II) modeset(0): Manufacturer: SHP  Model: 1476  Serial#: 0
[    43.286] (II) modeset(0): Year: 2016  Week: 49
[    43.286] (II) modeset(0): EDID Version: 1.4
[    43.286] (II) modeset(0): Digital Display Input
[    43.286] (II) modeset(0): 8 bits per channel
[    43.286] (II) modeset(0): Digital interface is DisplayPort
[    43.286] (II) modeset(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[    43.286] (II) modeset(0): Gamma: 2.20
[    43.286] (II) modeset(0): No DPMS capabilities specified
[    43.286] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    43.286] (II) modeset(0): Default color space is primary color space
[    43.286] (II) modeset(0): First detailed timing is preferred mode
[    43.286] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    43.286] (II) modeset(0): redX: 0.658 redY: 0.329   greenX: 0.204 greenY: 0.729
[    43.286] (II) modeset(0): blueX: 0.146 blueY: 0.050   whiteX: 0.306 whiteY: 0.341
[    43.286] (II) modeset(0): Manufacturer's mask: 0
[    43.286] (II) modeset(0): Supported detailed timing:
[    43.286] (II) modeset(0): clock: 533.2 MHz   Image Size:  346 x 194 mm
[    43.286] (II) modeset(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[    43.286] (II) modeset(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2222 v_border: 0
[    43.286] (II) modeset(0):  Y2XNDLQ156D1
[    43.286] (II) modeset(0): Unknown vendor-specific block 0
[    43.286] (II) modeset(0): EDID (in hex):
[    43.286] (II) modeset(0): 	00ffffffffffff004d10761400000000
[    43.286] (II) modeset(0): 	311a0104a52313780e9675a85434ba25
[    43.286] (II) modeset(0): 	0c4e5700000001010101010101010101
[    43.286] (II) modeset(0): 	0101010101014dd000a0f0703e803020
[    43.286] (II) modeset(0): 	35005ac2100000180000000000000000
[    43.286] (II) modeset(0): 	00000000000000000000000000fe0059
[    43.286] (II) modeset(0): 	32584e44804c51313536443100000000
[    43.286] (II) modeset(0): 	0002410328001200000b010a20200078
[    43.286] (II) modeset(0): Printing probed modes for output eDP-1
[    43.286] (II) modeset(0): Modeline "3840x2160"x60.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)
[    43.286] (II) modeset(0): Modeline "3840x2160"x60.0  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync (134.2 kHz d)
[    43.286] (II) modeset(0): Modeline "3840x2160"x60.0  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[    43.286] (II) modeset(0): Modeline "3200x1800"x60.0  492.00  3200 3456 3800 4400  1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[    43.286] (II) modeset(0): Modeline "3200x1800"x59.9  373.00  3200 3248 3280 3360  1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[    43.286] (II) modeset(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[    43.286] (II) modeset(0): Modeline "2880x1620"x60.0  303.75  2880 2928 2960 3040  1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1440"x120.0  638.25  2560 2780 3064 3568  1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1440"x120.0  469.12  2560 2584 2600 2640  1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[    43.286] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[    43.286] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    43.286] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    43.286] (II) modeset(0): Modeline "2048x1152"x120.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[    43.286] (II) modeset(0): Modeline "2048x1152"x120.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[    43.286] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[    43.286] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    43.286] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    43.286] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    43.286] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    43.286] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    43.286] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    43.286] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    43.286] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    43.286] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    43.286] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    43.286] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    43.286] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    43.286] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    43.286] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    43.286] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    43.286] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    43.286] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    43.286] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    43.286] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    43.286] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    43.286] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    43.286] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    43.286] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    43.286] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    43.286] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    43.286] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    43.286] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    43.286] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    43.286] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    43.286] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    43.286] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    43.286] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    43.286] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    43.286] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    43.286] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    43.286] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    43.286] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    43.286] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    43.286] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    43.286] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    43.286] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    43.286] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    43.286] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    43.286] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    43.286] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    43.286] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    43.286] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    43.286] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    43.286] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    43.286] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    43.286] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    43.286] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    43.286] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    43.286] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    43.286] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    43.286] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    43.286] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    43.286] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    43.286] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    43.286] (II) modeset(0): EDID for output DP-1
[    43.298] (II) modeset(0): EDID for output HDMI-1
[    43.298] (II) modeset(0): EDID for output DP-2
[    43.309] (II) modeset(0): EDID for output HDMI-2
[    43.309] (II) modeset(0): Output eDP-1 connected
[    43.309] (II) modeset(0): Output DP-1 disconnected
[    43.309] (II) modeset(0): Output HDMI-1 disconnected
[    43.309] (II) modeset(0): Output DP-2 disconnected
[    43.309] (II) modeset(0): Output HDMI-2 disconnected
[    43.309] (II) modeset(0): Using exact sizes for initial modes
[    43.309] (II) modeset(0): Output eDP-1 using initial mode 3840x2160 +0+0
[    43.309] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    43.309] (==) modeset(0): DPI set to (96, 96)
[    43.309] (II) Loading sub module "fb"
[    43.309] (II) LoadModule: "fb"
[    43.309] (II) Loading /usr/lib/xorg/modules/libfb.so
[    43.310] (II) Module fb: vendor="X.Org Foundation"
[    43.310] 	compiled for 1.19.6, module version = 1.0.0
[    43.310] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    43.310] (II) UnloadModule: "vesa"
[    43.310] (II) Unloading vesa
[    43.310] (==) Depth 24 pixmap format is 32 bpp
[    43.362] (==) modeset(0): Backing store enabled
[    43.362] (==) modeset(0): Silken mouse enabled
[    43.365] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    43.491] (==) modeset(0): DPMS enabled
[    43.491] (II) modeset(0): [DRI2] Setup complete
[    43.491] (II) modeset(0): [DRI2]   DRI driver: i965
[    43.491] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    43.491] (--) RandR disabled
[    43.495] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    43.495] (II) AIGLX: enabled GLX_ARB_create_context
[    43.495] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    43.495] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    43.495] (II) AIGLX: enabled GLX_INTEL_swap_event
[    43.495] (II) AIGLX: enabled GLX_SGI_swap_control
[    43.495] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    43.495] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    43.495] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    43.495] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    43.495] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    43.495] (II) AIGLX: Loaded and initialized i965
[    43.495] (II) GLX: Initialized DRI2 GL provider for screen 0
[    43.522] (II) modeset(0): Damage tracking initialized
[    43.522] (II) modeset(0): Setting screen physical size to 1016 x 571
[    43.574] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    43.574] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    43.574] (II) LoadModule: "libinput"
[    43.574] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    43.578] (II) Module libinput: vendor="X.Org Foundation"
[    43.578] 	compiled for 1.19.6, module version = 0.27.0
[    43.578] 	Module class: X.Org XInput Driver
[    43.578] 	ABI class: X.Org XInput driver, version 24.1
[    43.578] (II) Using input driver 'libinput' for 'Power Button'
[    43.578] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 0
[    43.578] (**) Power Button: always reports core events
[    43.578] (**) Option "Device" "/dev/input/event3"
[    43.578] (**) Option "_source" "server/udev"
[    43.578] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    43.578] (II) event3  - Power Button: device is a keyboard
[    43.578] (II) event3  - Power Button: device removed
[    43.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    43.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    43.578] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    43.578] (II) event3  - Power Button: device is a keyboard
[    43.578] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    43.578] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    43.578] (II) Using input driver 'libinput' for 'Video Bus'
[    43.580] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 23 paused 0
[    43.580] (**) Video Bus: always reports core events
[    43.580] (**) Option "Device" "/dev/input/event7"
[    43.580] (**) Option "_source" "server/udev"
[    43.580] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    43.580] (II) event7  - Video Bus: device is a keyboard
[    43.580] (II) event7  - Video Bus: device removed
[    43.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[    43.580] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    43.581] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    43.581] (II) event7  - Video Bus: device is a keyboard
[    43.581] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    43.581] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    43.581] (II) Using input driver 'libinput' for 'Video Bus'
[    43.581] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 24 paused 0
[    43.581] (**) Video Bus: always reports core events
[    43.581] (**) Option "Device" "/dev/input/event8"
[    43.581] (**) Option "_source" "server/udev"
[    43.581] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    43.581] (II) event8  - Video Bus: device is a keyboard
[    43.581] (II) event8  - Video Bus: device removed
[    43.581] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input10/event8"
[    43.581] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    43.581] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    43.581] (II) event8  - Video Bus: device is a keyboard
[    43.581] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    43.581] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    43.581] (II) Using input driver 'libinput' for 'Power Button'
[    43.583] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    43.583] (**) Power Button: always reports core events
[    43.583] (**) Option "Device" "/dev/input/event1"
[    43.583] (**) Option "_source" "server/udev"
[    43.583] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    43.583] (II) event1  - Power Button: device is a keyboard
[    43.583] (II) event1  - Power Button: device removed
[    43.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    43.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    43.583] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    43.583] (II) event1  - Power Button: device is a keyboard
[    43.583] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    43.583] (II) No input driver specified, ignoring this device.
[    43.583] (II) This device may have been added with another device file.
[    43.583] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    43.583] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    43.583] (II) Using input driver 'libinput' for 'Sleep Button'
[    43.585] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[    43.585] (**) Sleep Button: always reports core events
[    43.585] (**) Option "Device" "/dev/input/event2"
[    43.585] (**) Option "_source" "server/udev"
[    43.585] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    43.585] (II) event2  - Sleep Button: device is a keyboard
[    43.585] (II) event2  - Sleep Button: device removed
[    43.585] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    43.585] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    43.585] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    43.585] (II) event2  - Sleep Button: device is a keyboard
[    43.586] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event17)
[    43.586] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[    43.586] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[    43.586] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 27 paused 0
[    43.586] (**) Integrated_Webcam_HD: Integrate: always reports core events
[    43.586] (**) Option "Device" "/dev/input/event17"
[    43.586] (**) Option "_source" "server/udev"
[    43.586] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    43.586] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    43.586] (II) event17 - Integrated_Webcam_HD: Integrate: device removed
[    43.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input27/event17"
[    43.586] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 11)
[    43.586] (II) event17 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[    43.586] (II) event17 - Integrated_Webcam_HD: Integrate: device is a keyboard
[    43.586] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event16)
[    43.586] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[    43.586] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[    43.589] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 28 paused 0
[    43.589] (**) ELAN Touchscreen: always reports core events
[    43.589] (**) Option "Device" "/dev/input/event16"
[    43.589] (**) Option "_source" "server/udev"
[    43.589] (II) event16 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[    43.589] (II) event16 - ELAN Touchscreen: device is a touch device
[    43.589] (II) event16 - ELAN Touchscreen: device removed
[    43.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04F3:24A1.0002/input/input23/event16"
[    43.589] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 12)
[    43.589] (**) Option "AccelerationScheme" "none"
[    43.589] (**) ELAN Touchscreen: (accel) selected scheme none/0
[    43.589] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[    43.589] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[    43.589] (II) event16 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[    43.589] (II) event16 - ELAN Touchscreen: device is a touch device
[    43.589] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[    43.589] (II) No input driver specified, ignoring this device.
[    43.589] (II) This device may have been added with another device file.
[    43.589] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/event15)
[    43.589] (**) DLL07BE:01 06CB:7A13 Touchpad: Applying InputClass "libinput touchpad catchall"
[    43.589] (II) Using input driver 'libinput' for 'DLL07BE:01 06CB:7A13 Touchpad'
[    43.830] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 29 paused 0
[    43.830] (**) DLL07BE:01 06CB:7A13 Touchpad: always reports core events
[    43.830] (**) Option "Device" "/dev/input/event15"
[    43.830] (**) Option "_source" "server/udev"
[    43.830] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[    43.830] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[    43.830] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: device removed
[    43.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input18/event15"
[    43.830] (II) XINPUT: Adding extended input device "DLL07BE:01 06CB:7A13 Touchpad" (type: TOUCHPAD, id 13)
[    43.830] (**) Option "AccelerationScheme" "none"
[    43.830] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) selected scheme none/0
[    43.830] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration factor: 2.000
[    43.830] (**) DLL07BE:01 06CB:7A13 Touchpad: (accel) acceleration threshold: 4
[    43.830] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[    43.830] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: device is a touchpad
[    43.830] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/mouse0)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event9)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[    43.830] (II) No input driver specified, ignoring this device.
[    43.830] (II) This device may have been added with another device file.
[    43.830] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[    43.830] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    43.830] (II) Using input driver 'libinput' for 'Intel HID events'
[    43.834] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[    43.834] (**) Intel HID events: always reports core events
[    43.834] (**) Option "Device" "/dev/input/event5"
[    43.834] (**) Option "_source" "server/udev"
[    43.834] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    43.834] (II) event5  - Intel HID events: device is a keyboard
[    43.834] (II) event5  - Intel HID events: device removed
[    43.834] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event5"
[    43.834] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 14)
[    43.834] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[    43.834] (II) event5  - Intel HID events: device is a keyboard
[    43.834] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[    43.834] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    43.834] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    43.836] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[    43.836] (**) Intel HID 5 button array: always reports core events
[    43.836] (**) Option "Device" "/dev/input/event6"
[    43.836] (**) Option "_source" "server/udev"
[    43.836] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[    43.836] (II) event6  - Intel HID 5 button array: device is a keyboard
[    43.836] (II) event6  - Intel HID 5 button array: device removed
[    43.836] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input7/event6"
[    43.836] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 15)
[    43.836] (II) event6  - Intel HID 5 button array: is tagged by udev as: Keyboard Switch
[    43.836] (II) event6  - Intel HID 5 button array: device is a keyboard
[    43.836] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event19)
[    43.836] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    43.836] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    43.836] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 32 paused 0
[    43.836] (**) Dell WMI hotkeys: always reports core events
[    43.836] (**) Option "Device" "/dev/input/event19"
[    43.836] (**) Option "_source" "server/udev"
[    43.836] (II) event19 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    43.836] (II) event19 - Dell WMI hotkeys: device is a keyboard
[    43.836] (II) event19 - Dell WMI hotkeys: device removed
[    43.836] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input29/event19"
[    43.836] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[    43.836] (II) event19 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    43.836] (II) event19 - Dell WMI hotkeys: device is a keyboard
[    43.836] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    43.836] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    43.836] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    43.839] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 33 paused 0
[    43.839] (**) AT Translated Set 2 keyboard: always reports core events
[    43.839] (**) Option "Device" "/dev/input/event4"
[    43.839] (**) Option "_source" "server/udev"
[    43.839] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    43.839] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    43.839] (II) event4  - AT Translated Set 2 keyboard: device removed
[    43.839] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    43.839] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    43.839] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    43.839] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    43.839] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event20)
[    43.839] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[    43.839] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    43.840] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 34 paused 0
[    43.840] (**) PS/2 Generic Mouse: always reports core events
[    43.840] (**) Option "Device" "/dev/input/event20"
[    43.840] (**) Option "_source" "server/udev"
[    43.840] (II) event20 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    43.840] (II) event20 - PS/2 Generic Mouse: device is a pointer
[    43.840] (II) event20 - PS/2 Generic Mouse: device removed
[    43.840] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event20"
[    43.840] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 18)
[    43.840] (**) Option "AccelerationScheme" "none"
[    43.840] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[    43.840] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    43.840] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    43.840] (II) event20 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    43.840] (II) event20 - PS/2 Generic Mouse: device is a pointer
[    43.840] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[    43.840] (II) No input driver specified, ignoring this device.
[    43.840] (II) This device may have been added with another device file.
[    43.840] (II) config/udev: Adding input device PC Speaker (/dev/input/event18)
[    43.840] (II) No input driver specified, ignoring this device.
[    43.840] (II) This device may have been added with another device file.
[    72.594] (**) Option "fd" "20"
[    72.594] (II) event3  - Power Button: device removed
[    72.594] (**) Option "fd" "23"
[    72.594] (II) event7  - Video Bus: device removed
[    72.595] (**) Option "fd" "24"
[    72.595] (II) event8  - Video Bus: device removed
[    72.595] (**) Option "fd" "25"
[    72.595] (II) event1  - Power Button: device removed
[    72.595] (**) Option "fd" "26"
[    72.595] (II) event2  - Sleep Button: device removed
[    72.595] (**) Option "fd" "27"
[    72.595] (II) event17 - Integrated_Webcam_HD: Integrate: device removed
[    72.595] (**) Option "fd" "28"
[    72.595] (II) event16 - ELAN Touchscreen: device removed
[    72.595] (**) Option "fd" "29"
[    72.595] (II) event15 - DLL07BE:01 06CB:7A13 Touchpad: device removed
[    72.595] (**) Option "fd" "30"
[    72.595] (II) event5  - Intel HID events: device removed
[    72.595] (**) Option "fd" "31"
[    72.595] (II) event6  - Intel HID 5 button array: device removed
[    72.595] (**) Option "fd" "32"
[    72.595] (II) event19 - Dell WMI hotkeys: device removed
[    72.595] (**) Option "fd" "33"
[    72.595] (II) event4  - AT Translated Set 2 keyboard: device removed
[    72.595] (**) Option "fd" "34"
[    72.595] (II) event20 - PS/2 Generic Mouse: device removed
[    72.596] (II) UnloadModule: "libinput"
[    72.596] (II) systemd-logind: releasing fd for 13:84
[    72.635] (II) UnloadModule: "libinput"
[    72.635] (II) systemd-logind: releasing fd for 13:68
[    72.635] (II) UnloadModule: "libinput"
[    72.635] (II) systemd-logind: releasing fd for 13:83
[    72.636] (II) UnloadModule: "libinput"
[    72.636] (II) systemd-logind: releasing fd for 13:70
[    72.636] (II) UnloadModule: "libinput"
[    72.636] (II) systemd-logind: releasing fd for 13:69
[    72.636] (II) UnloadModule: "libinput"
[    72.636] (II) systemd-logind: releasing fd for 13:79
[    72.636] (II) UnloadModule: "libinput"
[    72.636] (II) systemd-logind: releasing fd for 13:80
[    72.637] (II) UnloadModule: "libinput"
[    72.637] (II) systemd-logind: releasing fd for 13:81
[    72.637] (II) UnloadModule: "libinput"
[    72.637] (II) systemd-logind: releasing fd for 13:66
[    72.637] (II) UnloadModule: "libinput"
[    72.637] (II) systemd-logind: releasing fd for 13:65
[    72.637] (II) UnloadModule: "libinput"
[    72.637] (II) systemd-logind: releasing fd for 13:72
[    72.638] (II) UnloadModule: "libinput"
[    72.638] (II) systemd-logind: releasing fd for 13:71
[    72.638] (II) UnloadModule: "libinput"
[    72.638] (II) systemd-logind: releasing fd for 13:67
[    72.649] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    72.649] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    72.649] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[    72.649] (II) Server terminated successfully (0). Closing log file.

seth · 2018-03-24 20:13:52

xinitrc? I thought we're talking about lightdm?

The X11 server starts and just exits after ~30 seconds.

pacman -Qi xterm twm

romansky · 2018-03-24 20:34:36

My apologies about the xinitrc, as I'm unsure of it relevancy to my lightdm problems.

$ pacman -Qi xterm xorg-twm
Name            : xterm
Version         : 331-1
Description     : X Terminal Emulator
Architecture    : x86_64
URL             : http://invisible-island.net/xterm/
Licenses        : custom
Groups          : None
Provides        : None
Depends On      : libxft  libxaw  ncurses  xorg-luit  xbitmaps  libutempter
                  libxkbfile
Optional Deps   : None
Required By     : None
Optional For    : graphviz  xorg-xinit
Conflicts With  : None
Replaces        : None
Installed Size  : 934.00 KiB
Packager        : Andreas Radke <andyrtr@archlinux.org>
Build Date      : Mon 01 Jan 2018 05:26:36 AM EST
Install Date    : Fri 23 Mar 2018 10:40:06 PM EDT
Install Reason  : Explicitly installed
Install Script  : No
Validated By    : Signature

Name            : xorg-twm
Version         : 1.0.10-1
Description     : Tab Window Manager for the X Window System
Architecture    : x86_64
URL             : https://xorg.freedesktop.org/
Licenses        : custom
Groups          : None
Provides        : None
Depends On      : libxmu
Optional Deps   : None
Required By     : None
Optional For    : xorg-xinit
Conflicts With  : None
Replaces        : None
Installed Size  : 241.00 KiB
Packager        : Andreas Radke <andyrtr@archlinux.org>
Build Date      : Wed 07 Mar 2018 02:13:01 PM EST
Install Date    : Fri 23 Mar 2018 10:40:06 PM EDT
Install Reason  : Explicitly installed
Install Script  : No
Validated By    : Signature

romansky · 2018-03-26 14:00:22

After trying to start LightDM over the past few days here are a few of my results:

Running

sudo systemctl start lightdm.service

Results in my screen showing a black screen with a frozen cursor at the top left.
I am unable to go into tty2 or 3, etc.

Running

sudo lightdm

Results in my screen showing a black screen with a frozen cursor at the top left.
I am unable to go into tty2 or 3, etc.

Running

startx

Gives me a xorg-twm setup.

Running

sudo systemctl start gdm.service

Starts up GDM just fine and allows me to choose my DE.

My Xorg log (found in ~/.local/share/xorg) and LightDM log (found in /var/log/lightdm) have not changed.

Here is my current lightdm.conf

#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=lightdm-gtk-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

Last edited by romansky (2018-03-26 14:20:34)

loqs · 2018-03-26 18:32:22

romansky wrote:

My Xorg log (found in ~/.local/share/xorg) and LightDM log (found in /var/log/lightdm) have not changed.

The lightdm log still contains the following even after changing the config to use lightdm-gtk-greeter?

[+0.00s] DEBUG: Seat seat0: Failed to find session configuration lightdm-webkit2-greeter

As lightdm runs as X as root the log would be be in /var/log/ not ~/.local/share/xorg

romansky · 2018-03-27 12:29:16

After doing some research I believe my issue may be more complicated than I expected.

I am currently running Arch on a Dell XPS 15 9560 which has a discrete Nvidia GPU. Since I have no access to the GPU (thanks Nvidia) I decided to turn it off with Bumblebee and BBswitch.

This is known to cause a hardlock when starting X.

Here is a quote from the Dell XPS 15 9560 Thread
https://bbs.archlinux.org/viewtopic.php?id=223056

Running X without any configuration (I've blacklisted nouveau just in case) defaults to using the Intel card and modesetting, which is a fine baseline. However, turning off the nVidia GPU with acpi_call or bbswitch is where issues start. Trying to start X or suspending with the GPU off will hardlock the system. Trying to turn on the GPU before suspending might hardlock the system.
Running a Bumblebee setup works with the same caveats as long as you are starting X with the nVidia GPU on. Any time optirun is used, the system might hardlock. bbswitch will also automatically try to turn the GPU on for suspend which means it can work, but sometimes results in a hardlock.
Essentially, anything that probes the GPU when it's off, be it a turn-on request itself, might hardlock the system.

This somewhat confuses me because starting x as a normal user gives me an xorg-twm but starting x as root gives me the hardlock as described in the thread.

Last edited by romansky (2018-03-27 12:54:35)

Arch Linux

#1 2018-03-05 05:38:54

LightDM shows black/frozen screen while GDM starts up just fine

#2 2018-03-05 09:14:16

Re: LightDM shows black/frozen screen while GDM starts up just fine

#3 2018-03-05 15:13:49

Re: LightDM shows black/frozen screen while GDM starts up just fine

#4 2018-03-05 15:15:22

Re: LightDM shows black/frozen screen while GDM starts up just fine

#5 2018-03-05 22:00:59

Re: LightDM shows black/frozen screen while GDM starts up just fine

#6 2018-03-05 22:03:59

Re: LightDM shows black/frozen screen while GDM starts up just fine

#7 2018-03-05 22:12:36

Re: LightDM shows black/frozen screen while GDM starts up just fine

#8 2018-03-17 22:55:21

Re: LightDM shows black/frozen screen while GDM starts up just fine

#9 2018-03-18 04:50:49

Re: LightDM shows black/frozen screen while GDM starts up just fine

#10 2018-03-24 01:05:02

Re: LightDM shows black/frozen screen while GDM starts up just fine

#11 2018-03-24 02:00:50

Re: LightDM shows black/frozen screen while GDM starts up just fine

#12 2018-03-24 03:27:30

Re: LightDM shows black/frozen screen while GDM starts up just fine

#13 2018-03-24 07:32:54

Re: LightDM shows black/frozen screen while GDM starts up just fine

#14 2018-03-24 19:52:39

Re: LightDM shows black/frozen screen while GDM starts up just fine

#15 2018-03-24 20:13:52

Re: LightDM shows black/frozen screen while GDM starts up just fine

#16 2018-03-24 20:34:36

Re: LightDM shows black/frozen screen while GDM starts up just fine

#17 2018-03-26 14:00:22

Re: LightDM shows black/frozen screen while GDM starts up just fine

#18 2018-03-26 18:32:22

Re: LightDM shows black/frozen screen while GDM starts up just fine

#19 2018-03-27 12:29:16

Re: LightDM shows black/frozen screen while GDM starts up just fine

Board footer