"Cannot connect to X server" after upgrade

extrapalantine · 2018-03-27 15:30:49

My latest upgrade froze and crashed while trying to upgrade fontconfig.

I --excluded fontconfig and upgraded the rest of the system, then went back to try to figure out what was wrong with fontconfig.

Apparently a lot of files in /etc/fonts/conf.d are empty now, for some reason.

Worse yet, my X server now crashes back to the CLI after a few moments on my i3 desktop.

The error message is:

No such file or directoryxinit: cannot connect to Xserver

I've been checking out a lot of Arch forum threads on this, but I can't even seem to pinpoint the root cause of the issue. Any help would be greatly appreciated.

seth · 2018-03-27 16:38:06

i3 will likely crash/exit because of the broken fontconfig situation. Fix that and try again. Otherwise look into your journal and your xorg log.

extrapalantine · 2018-03-27 17:43:34

Thanks for your reply, seth. I've fixed the broken fontconfig install, but I'm still getting the same behavior from my X server.

Here's Xorg.0.log:

[   469.335] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   469.340] X Protocol Version 11, Revision 0
[   469.341] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[   469.342] Current Operating System: Linux ben 4.15.12-1-ARCH #1 SMP PREEMPT Wed Mar 21 15:14:56 UTC 2018 x86_64
[   469.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6
[   469.344] Build Date: 26 January 2018  10:25:18AM
[   469.345]  
[   469.346] Current version of pixman: 0.34.0
[   469.347] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   469.347] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   469.355] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 27 18:07:49 2018
[   469.358] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   469.359] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   469.359] (==) No Layout section.  Using the first Screen section.
[   469.359] (==) No screen section available. Using defaults.
[   469.359] (**) |-->Screen "Default Screen Section" (0)
[   469.359] (**) |   |-->Monitor "<default monitor>"
[   469.360] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   469.360] (==) Automatically adding devices
[   469.360] (==) Automatically enabling devices
[   469.360] (==) Automatically adding GPU devices
[   469.360] (==) Automatically binding GPU devices
[   469.360] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   469.360] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   469.360] (==) ModulePath set to "/usr/lib/xorg/modules"
[   469.360] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   469.360] (II) Loader magic: 0x5577895c4d60
[   469.360] (II) Module ABI versions:
[   469.360] 	X.Org ANSI C Emulation: 0.4
[   469.360] 	X.Org Video Driver: 23.0
[   469.360] 	X.Org XInput driver : 24.1
[   469.360] 	X.Org Server Extension : 10.0
[   469.361] (++) using VT number 1

[   469.363] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   469.364] (II) xfree86: Adding drm device (/dev/dri/card0)
[   469.364] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   469.366] (--) PCI:*(0:0:2:0) 8086:0166:1043:2102 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   469.366] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   469.366] (II) LoadModule: "glx"
[   469.366] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   469.367] (II) Module glx: vendor="X.Org Foundation"
[   469.367] 	compiled for 1.19.6, module version = 1.0.0
[   469.367] 	ABI class: X.Org Server Extension, version 10.0
[   469.367] (==) Matched intel as autoconfigured driver 0
[   469.367] (==) Matched intel as autoconfigured driver 1
[   469.367] (==) Matched modesetting as autoconfigured driver 2
[   469.367] (==) Matched fbdev as autoconfigured driver 3
[   469.367] (==) Matched vesa as autoconfigured driver 4
[   469.367] (==) Assigned the driver to the xf86ConfigLayout
[   469.367] (II) LoadModule: "intel"
[   469.367] (WW) Warning, couldn't open module intel
[   469.367] (II) UnloadModule: "intel"
[   469.367] (II) Unloading intel
[   469.367] (EE) Failed to load module "intel" (module does not exist, 0)
[   469.367] (II) LoadModule: "modesetting"
[   469.367] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   469.367] (II) Module modesetting: vendor="X.Org Foundation"
[   469.367] 	compiled for 1.19.6, module version = 1.19.6
[   469.367] 	Module class: X.Org Video Driver
[   469.367] 	ABI class: X.Org Video Driver, version 23.0
[   469.367] (II) LoadModule: "fbdev"
[   469.367] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   469.367] (II) Module fbdev: vendor="X.Org Foundation"
[   469.367] 	compiled for 1.19.5, module version = 0.4.4
[   469.367] 	Module class: X.Org Video Driver
[   469.367] 	ABI class: X.Org Video Driver, version 23.0
[   469.367] (II) LoadModule: "vesa"
[   469.367] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   469.368] (II) Module vesa: vendor="X.Org Foundation"
[   469.368] 	compiled for 1.19.6, module version = 2.4.0
[   469.368] 	Module class: X.Org Video Driver
[   469.368] 	ABI class: X.Org Video Driver, version 23.0
[   469.368] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   469.368] (II) FBDEV: driver for framebuffer: fbdev
[   469.368] (II) VESA: driver for VESA chipsets: vesa
[   469.368] (II) modeset(0): using drv /dev/dri/card0
[   469.368] (WW) Falling back to old probe method for fbdev
[   469.368] (II) Loading sub module "fbdevhw"
[   469.368] (II) LoadModule: "fbdevhw"
[   469.368] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   469.368] (II) Module fbdevhw: vendor="X.Org Foundation"
[   469.368] 	compiled for 1.19.6, module version = 0.0.2
[   469.368] 	ABI class: X.Org Video Driver, version 23.0
[   469.368] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   469.368] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   469.368] (==) modeset(0): RGB weight 888
[   469.368] (==) modeset(0): Default visual is TrueColor
[   469.368] (II) Loading sub module "glamoregl"
[   469.368] (II) LoadModule: "glamoregl"
[   469.368] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   469.368] (II) Module glamoregl: vendor="X.Org Foundation"
[   469.368] 	compiled for 1.19.6, module version = 1.0.0
[   469.369] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   469.369] (II) glamor: OpenGL accelerated X.org driver based.
[   469.377] (II) glamor: EGL version 1.4 (DRI2):
[   469.380] (II) modeset(0): glamor initialized
[   469.381] (II) modeset(0): Output LVDS-1 has no monitor section
[   469.386] (II) modeset(0): Output VGA-1 has no monitor section
[   469.466] (II) modeset(0): Output HDMI-1 has no monitor section
[   469.545] (II) modeset(0): Output DP-1 has no monitor section
[   469.545] (II) modeset(0): EDID for output LVDS-1
[   469.545] (II) modeset(0): Manufacturer: LGD  Model: 38e  Serial#: 0
[   469.545] (II) modeset(0): Year: 2012  Week: 0
[   469.545] (II) modeset(0): EDID Version: 1.3
[   469.545] (II) modeset(0): Digital Display Input
[   469.545] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   469.545] (II) modeset(0): Gamma: 2.20
[   469.545] (II) modeset(0): No DPMS capabilities specified
[   469.545] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   469.545] (II) modeset(0): First detailed timing is preferred mode
[   469.545] (II) modeset(0): redX: 0.609 redY: 0.348   greenX: 0.352 greenY: 0.606
[   469.545] (II) modeset(0): blueX: 0.150 blueY: 0.096   whiteX: 0.313 whiteY: 0.329
[   469.545] (II) modeset(0): Manufacturer's mask: 0
[   469.545] (II) modeset(0): Supported detailed timing:
[   469.545] (II) modeset(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[   469.545] (II) modeset(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[   469.545] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[   469.545] (II) modeset(0):  LG Display
[   469.545] (II) modeset(0):  LP156WH4-TLN2
[   469.545] (II) modeset(0): EDID (in hex):
[   469.545] (II) modeset(0): 	00ffffffffffff0030e48e0300000000
[   469.545] (II) modeset(0): 	00160103802213780a01a59c595a9b26
[   469.545] (II) modeset(0): 	18505400000001010101010101010101
[   469.545] (II) modeset(0): 	010101010101581b567e50000e302430
[   469.545] (II) modeset(0): 	350058c2100000190000000000000000
[   469.545] (II) modeset(0): 	00000000000000000000000000fe004c
[   469.545] (II) modeset(0): 	4720446973706c61790a2020000000fe
[   469.545] (II) modeset(0): 	004c503135365748342d544c4e3200c6
[   469.546] (II) modeset(0): Printing probed modes for output LVDS-1
[   469.546] (II) modeset(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[   469.546] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   469.546] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   469.546] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   469.546] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   469.546] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   469.546] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   469.546] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   469.546] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   469.546] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   469.546] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   469.546] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   469.546] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   469.546] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   469.546] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   469.546] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   469.546] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   469.546] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   469.546] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   469.546] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   469.546] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   469.546] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   469.546] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   469.546] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   469.546] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   469.546] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   469.546] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   469.546] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   469.546] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   469.546] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   469.546] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   469.546] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   469.546] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   469.546] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   469.546] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   469.546] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   469.546] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   469.546] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   469.546] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   469.546] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   469.546] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   469.546] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   469.546] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   469.546] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   469.546] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   469.546] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   469.546] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   469.546] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   469.546] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   469.546] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   469.546] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   469.546] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   469.546] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   469.546] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   469.551] (II) modeset(0): EDID for output VGA-1
[   469.631] (II) modeset(0): EDID for output HDMI-1
[   469.631] (II) modeset(0): Manufacturer: ACI  Model: 23d2  Serial#: 137913
[   469.631] (II) modeset(0): Year: 2014  Week: 17
[   469.631] (II) modeset(0): EDID Version: 1.3
[   469.631] (II) modeset(0): Digital Display Input
[   469.631] (II) modeset(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[   469.631] (II) modeset(0): Gamma: 2.20
[   469.631] (II) modeset(0): DPMS capabilities: Off
[   469.631] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   469.631] (II) modeset(0): First detailed timing is preferred mode
[   469.631] (II) modeset(0): redX: 0.636 redY: 0.333   greenX: 0.303 greenY: 0.626
[   469.631] (II) modeset(0): blueX: 0.153 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[   469.631] (II) modeset(0): Supported established timings:
[   469.631] (II) modeset(0): 720x400@70Hz
[   469.631] (II) modeset(0): 640x480@60Hz
[   469.631] (II) modeset(0): 640x480@67Hz
[   469.631] (II) modeset(0): 640x480@75Hz
[   469.631] (II) modeset(0): 800x600@56Hz
[   469.631] (II) modeset(0): 800x600@60Hz
[   469.631] (II) modeset(0): 800x600@72Hz
[   469.631] (II) modeset(0): 800x600@75Hz
[   469.631] (II) modeset(0): 832x624@75Hz
[   469.631] (II) modeset(0): 1024x768@60Hz
[   469.631] (II) modeset(0): 1024x768@70Hz
[   469.631] (II) modeset(0): 1024x768@75Hz
[   469.631] (II) modeset(0): 1280x1024@75Hz
[   469.631] (II) modeset(0): Manufacturer's mask: 0
[   469.631] (II) modeset(0): Supported standard timings:
[   469.631] (II) modeset(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   469.631] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   469.631] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   469.631] (II) modeset(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   469.631] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   469.631] (II) modeset(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   469.631] (II) modeset(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   469.631] (II) modeset(0): #7: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   469.631] (II) modeset(0): Supported detailed timing:
[   469.632] (II) modeset(0): clock: 148.5 MHz   Image Size:  509 x 286 mm
[   469.632] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   469.632] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   469.632] (II) modeset(0): Serial No: E4LMTF137913
[   469.632] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[   469.632] (II) modeset(0): Monitor name: ASUS VS239
[   469.632] (II) modeset(0): Supported detailed timing:
[   469.632] (II) modeset(0): clock: 27.0 MHz   Image Size:  509 x 286 mm
[   469.632] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[   469.632] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[   469.632] (II) modeset(0): Supported detailed timing:
[   469.632] (II) modeset(0): clock: 74.2 MHz   Image Size:  509 x 286 mm
[   469.632] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[   469.632] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   469.632] (II) modeset(0): Supported detailed timing:
[   469.632] (II) modeset(0): clock: 74.2 MHz   Image Size:  509 x 286 mm
[   469.632] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[   469.632] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   469.632] (II) modeset(0): Supported detailed timing:
[   469.632] (II) modeset(0): clock: 27.0 MHz   Image Size:  509 x 286 mm
[   469.632] (II) modeset(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[   469.632] (II) modeset(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[   469.632] (II) modeset(0): Number of EDID sections to follow: 1
[   469.632] (II) modeset(0): EDID (in hex):
[   469.632] (II) modeset(0): 	00ffffffffffff000469d223b91a0200
[   469.632] (II) modeset(0): 	1118010380331d782ad945a2554da027
[   469.632] (II) modeset(0): 	125054b7ef00d1c0814081809500b300
[   469.632] (II) modeset(0): 	714f81c08100023a801871382d40582c
[   469.632] (II) modeset(0): 	4500fd1e1100001e000000ff0045344c
[   469.632] (II) modeset(0): 	4d54463133373931330a000000fd0032
[   469.632] (II) modeset(0): 	4b185311000a202020202020000000fc
[   469.632] (II) modeset(0): 	00415355532056533233390a202001fa
[   469.632] (II) modeset(0): 	020322714f0102031112130414050e0f
[   469.632] (II) modeset(0): 	1d1e1f10230917078301000065030c00
[   469.632] (II) modeset(0): 	10008c0ad08a20e02d10103e9600fd1e
[   469.632] (II) modeset(0): 	11000018011d007251d01e206e285500
[   469.632] (II) modeset(0): 	fd1e1100001e011d00bc52d01e20b828
[   469.632] (II) modeset(0): 	5540fd1e1100001e8c0ad09020403120
[   469.632] (II) modeset(0): 	0c405500fd1e11000018000000000000
[   469.632] (II) modeset(0): 	000000000000000000000000000000e9
[   469.632] (II) modeset(0): Printing probed modes for output HDMI-1
[   469.632] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   469.632] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   469.633] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   469.633] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   469.633] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   469.633] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[   469.633] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   469.633] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   469.633] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1440x576"x50.0   54.00  1440 1464 1592 1728  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   469.633] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   469.633] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   469.633] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   469.633] (II) modeset(0): Modeline "1440x480"x60.0   54.05  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "1440x480"x59.9   54.00  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   469.633] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   469.633] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   469.633] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   469.633] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   469.633] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   469.633] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   469.633] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   469.633] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   469.633] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   469.713] (II) modeset(0): EDID for output DP-1
[   469.713] (II) modeset(0): Output LVDS-1 connected
[   469.713] (II) modeset(0): Output VGA-1 disconnected
[   469.713] (II) modeset(0): Output HDMI-1 connected
[   469.713] (II) modeset(0): Output DP-1 disconnected
[   469.713] (II) modeset(0): Using spanning desktop for initial modes
[   469.713] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[   469.713] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[   469.713] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   469.713] (==) modeset(0): DPI set to (96, 96)
[   469.713] (II) Loading sub module "fb"
[   469.713] (II) LoadModule: "fb"
[   469.713] (II) Loading /usr/lib/xorg/modules/libfb.so
[   469.713] (II) Module fb: vendor="X.Org Foundation"
[   469.713] 	compiled for 1.19.6, module version = 1.0.0
[   469.713] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   469.713] (II) UnloadModule: "fbdev"
[   469.713] (II) Unloading fbdev
[   469.713] (II) UnloadSubModule: "fbdevhw"
[   469.713] (II) Unloading fbdevhw
[   469.713] (II) UnloadModule: "vesa"
[   469.713] (II) Unloading vesa
[   469.713] (==) Depth 24 pixmap format is 32 bpp
[   469.769] (==) modeset(0): Backing store enabled
[   469.769] (==) modeset(0): Silken mouse enabled
[   469.769] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   469.858] (==) modeset(0): DPMS enabled
[   469.858] (II) modeset(0): [DRI2] Setup complete
[   469.858] (II) modeset(0): [DRI2]   DRI driver: i965
[   469.858] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   469.858] (--) RandR disabled
[   469.869] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   469.869] (II) AIGLX: enabled GLX_ARB_create_context
[   469.869] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   469.869] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   469.869] (II) AIGLX: enabled GLX_INTEL_swap_event
[   469.869] (II) AIGLX: enabled GLX_SGI_swap_control
[   469.869] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   469.869] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   469.869] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   469.869] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   469.869] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   469.870] (II) AIGLX: Loaded and initialized i965
[   469.870] (II) GLX: Initialized DRI2 GL provider for screen 0
[   469.871] (II) modeset(0): Damage tracking initialized
[   469.871] (II) modeset(0): Setting screen physical size to 869 x 285
[   469.950] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   469.950] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   469.950] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   469.950] (II) LoadModule: "libinput"
[   469.950] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   469.951] (II) Module libinput: vendor="X.Org Foundation"
[   469.951] 	compiled for 1.19.6, module version = 0.27.0
[   469.951] 	Module class: X.Org XInput Driver
[   469.951] 	ABI class: X.Org XInput driver, version 24.1
[   469.951] (II) Using input driver 'libinput' for 'Power Button'
[   469.952] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[   469.952] (**) Power Button: always reports core events
[   469.952] (**) Option "Device" "/dev/input/event2"
[   469.952] (**) Option "_source" "server/udev"
[   469.952] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   469.952] (II) event2  - Power Button: device is a keyboard
[   469.952] (II) event2  - Power Button: device removed
[   469.952] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   469.952] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   469.953] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   469.953] (II) event2  - Power Button: device is a keyboard
[   469.953] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event7)
[   469.953] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[   469.953] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[   469.953] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[   469.954] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26 paused 0
[   469.954] (**) Asus Wireless Radio Control: always reports core events
[   469.954] (**) Option "Device" "/dev/input/event7"
[   469.954] (**) Option "_source" "server/udev"
[   469.954] (II) event7  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[   469.954] (II) event7  - Asus Wireless Radio Control: device is a keyboard
[   469.954] (II) event7  - Asus Wireless Radio Control: device removed
[   469.954] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input11/event7"
[   469.954] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[   469.955] (II) event7  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[   469.955] (II) event7  - Asus Wireless Radio Control: device is a keyboard
[   469.955] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   469.955] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   469.955] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   469.955] (II) Using input driver 'libinput' for 'Video Bus'
[   469.956] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 27 paused 0
[   469.956] (**) Video Bus: always reports core events
[   469.956] (**) Option "Device" "/dev/input/event8"
[   469.956] (**) Option "_source" "server/udev"
[   469.956] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   469.956] (II) event8  - Video Bus: device is a keyboard
[   469.956] (II) event8  - Video Bus: device removed
[   469.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event8"
[   469.956] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   469.956] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   469.956] (II) event8  - Video Bus: device is a keyboard
[   469.957] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   469.957] (II) No input driver specified, ignoring this device.
[   469.957] (II) This device may have been added with another device file.
[   469.957] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   469.957] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   469.957] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   469.957] (II) Using input driver 'libinput' for 'Sleep Button'
[   469.958] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[   469.958] (**) Sleep Button: always reports core events
[   469.958] (**) Option "Device" "/dev/input/event1"
[   469.958] (**) Option "_source" "server/udev"
[   469.958] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   469.958] (II) event1  - Sleep Button: device is a keyboard
[   469.958] (II) event1  - Sleep Button: device removed
[   469.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   469.958] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   469.959] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   469.959] (II) event1  - Sleep Button: device is a keyboard
[   469.959] (II) config/udev: Adding input device CM Storm QuickFire Rapid keyboard (/dev/input/event4)
[   469.959] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass "evdev keyboard catchall"
[   469.959] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass "libinput keyboard catchall"
[   469.959] (II) Using input driver 'libinput' for 'CM Storm QuickFire Rapid keyboard'
[   469.960] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[   469.960] (**) CM Storm QuickFire Rapid keyboard: always reports core events
[   469.960] (**) Option "Device" "/dev/input/event4"
[   469.960] (**) Option "_source" "server/udev"
[   469.961] (II) event4  - CM Storm QuickFire Rapid keyboard: is tagged by udev as: Keyboard
[   469.961] (II) event4  - CM Storm QuickFire Rapid keyboard: device is a keyboard
[   469.961] (II) event4  - CM Storm QuickFire Rapid keyboard: device removed
[   469.961] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:2516:0004.0001/input/input8/event4"
[   469.961] (II) XINPUT: Adding extended input device "CM Storm QuickFire Rapid keyboard" (type: KEYBOARD, id 10)
[   469.962] (II) event4  - CM Storm QuickFire Rapid keyboard: is tagged by udev as: Keyboard
[   469.962] (II) event4  - CM Storm QuickFire Rapid keyboard: device is a keyboard
[   469.962] (II) config/udev: Adding input device CM Storm QuickFire Rapid keyboard (/dev/input/event5)
[   469.962] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass "evdev keyboard catchall"
[   469.962] (**) CM Storm QuickFire Rapid keyboard: Applying InputClass "libinput keyboard catchall"
[   469.962] (II) Using input driver 'libinput' for 'CM Storm QuickFire Rapid keyboard'
[   469.963] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[   469.963] (**) CM Storm QuickFire Rapid keyboard: always reports core events
[   469.963] (**) Option "Device" "/dev/input/event5"
[   469.963] (**) Option "_source" "server/udev"
[   469.964] (II) event5  - CM Storm QuickFire Rapid keyboard: is tagged by udev as: Keyboard
[   469.964] (II) event5  - CM Storm QuickFire Rapid keyboard: device is a keyboard
[   469.964] (II) event5  - CM Storm QuickFire Rapid keyboard: device removed
[   469.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.1/0003:2516:0004.0002/input/input9/event5"
[   469.964] (II) XINPUT: Adding extended input device "CM Storm QuickFire Rapid keyboard" (type: KEYBOARD, id 11)
[   469.965] (II) event5  - CM Storm QuickFire Rapid keyboard: is tagged by udev as: Keyboard
[   469.965] (II) event5  - CM Storm QuickFire Rapid keyboard: device is a keyboard
[   469.965] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event6)
[   469.965] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   469.965] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   469.965] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[   469.966] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[   469.966] (**) PixArt USB Optical Mouse: always reports core events
[   469.966] (**) Option "Device" "/dev/input/event6"
[   469.966] (**) Option "_source" "server/udev"
[   469.967] (II) event6  - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[   469.967] (II) event6  - PixArt USB Optical Mouse: device set to 1000 DPI
[   469.967] (II) event6  - PixArt USB Optical Mouse: device is a pointer
[   469.967] (II) event6  - PixArt USB Optical Mouse: device removed
[   469.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:093A:2510.0003/input/input10/event6"
[   469.967] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 12)
[   469.967] (**) Option "AccelerationScheme" "none"
[   469.967] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[   469.967] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   469.967] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[   469.968] (II) event6  - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[   469.968] (II) event6  - PixArt USB Optical Mouse: device set to 1000 DPI
[   469.968] (II) event6  - PixArt USB Optical Mouse: device is a pointer
[   469.969] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[   469.969] (II) No input driver specified, ignoring this device.
[   469.969] (II) This device may have been added with another device file.
[   469.970] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event15)
[   469.970] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "evdev keyboard catchall"
[   469.970] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[   469.970] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[   469.970] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 32 paused 0
[   469.970] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[   469.970] (**) Option "Device" "/dev/input/event15"
[   469.970] (**) Option "_source" "server/udev"
[   469.971] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[   469.971] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[   469.971] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[   469.971] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22/event15"
[   469.971] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 13)
[   469.972] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[   469.972] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[   469.972] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[   469.972] (II) No input driver specified, ignoring this device.
[   469.972] (II) This device may have been added with another device file.
[   469.973] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[   469.973] (II) No input driver specified, ignoring this device.
[   469.973] (II) This device may have been added with another device file.
[   469.973] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[   469.973] (II) No input driver specified, ignoring this device.
[   469.973] (II) This device may have been added with another device file.
[   469.974] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event13)
[   469.974] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   469.974] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   469.974] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[   469.975] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 33 paused 0
[   469.975] (**) Asus WMI hotkeys: always reports core events
[   469.975] (**) Option "Device" "/dev/input/event13"
[   469.975] (**) Option "_source" "server/udev"
[   469.975] (II) event13 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[   469.975] (II) event13 - Asus WMI hotkeys: device is a keyboard
[   469.975] (II) event13 - Asus WMI hotkeys: device removed
[   469.975] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input21/event13"
[   469.975] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[   469.976] (II) event13 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[   469.976] (II) event13 - Asus WMI hotkeys: device is a keyboard
[   469.976] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   469.976] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   469.976] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   469.976] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   469.977] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 34 paused 0
[   469.977] (**) AT Translated Set 2 keyboard: always reports core events
[   469.977] (**) Option "Device" "/dev/input/event3"
[   469.977] (**) Option "_source" "server/udev"
[   469.977] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   469.977] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   469.977] (II) event3  - AT Translated Set 2 keyboard: device removed
[   469.977] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   469.977] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[   469.978] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   469.978] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   469.978] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event14)
[   469.978] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   469.978] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[   469.978] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   469.978] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   469.978] (II) LoadModule: "synaptics"
[   469.978] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   469.978] (II) Module synaptics: vendor="X.Org Foundation"
[   469.978] 	compiled for 1.19.0, module version = 1.9.0
[   469.978] 	Module class: X.Org XInput Driver
[   469.978] 	ABI class: X.Org XInput driver, version 24.1
[   469.978] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   469.979] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 35 paused 0
[   469.979] (**) ETPS/2 Elantech Touchpad: always reports core events
[   469.979] (**) Option "Device" "/dev/input/event14"
[   469.979] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[   469.979] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33)
[   469.979] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33)
[   469.979] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   469.979] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   469.980] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[   469.980] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   469.980] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[   469.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   469.980] (**) ETPS/2 Elantech Touchpad: always reports core events
[   469.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event14"
[   469.980] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 16)
[   469.980] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   469.980] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[   469.980] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[   469.980] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   469.980] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   469.980] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   469.980] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   469.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   469.980] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[   469.980] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   469.980] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   469.980] (II) No input driver specified, ignoring this device.
[   469.980] (II) This device may have been added with another device file.
[   469.981] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/event16)
[   469.981] (II) No input driver specified, ignoring this device.
[   469.981] (II) This device may have been added with another device file.
[   469.981] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/js0)
[   469.981] (II) No input driver specified, ignoring this device.
[   469.981] (II) This device may have been added with another device file.
[   469.981] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) #2 (/dev/input/event17)
[   469.981] (II) No input driver specified, ignoring this device.
[   469.981] (II) This device may have been added with another device file.
[   469.981] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) #2 (/dev/input/js1)
[   469.981] (II) No input driver specified, ignoring this device.
[   469.981] (II) This device may have been added with another device file.
[   470.155] (**) Option "fd" "23"
[   470.155] (II) event2  - Power Button: device removed
[   470.156] (**) Option "fd" "26"
[   470.156] (II) event7  - Asus Wireless Radio Control: device removed
[   470.156] (**) Option "fd" "27"
[   470.156] (II) event8  - Video Bus: device removed
[   470.156] (**) Option "fd" "28"
[   470.156] (II) event1  - Sleep Button: device removed
[   470.156] (**) Option "fd" "29"
[   470.156] (II) event4  - CM Storm QuickFire Rapid keyboard: device removed
[   470.156] (**) Option "fd" "30"
[   470.156] (II) event5  - CM Storm QuickFire Rapid keyboard: device removed
[   470.156] (**) Option "fd" "31"
[   470.156] (II) event6  - PixArt USB Optical Mouse: device removed
[   470.156] (**) Option "fd" "32"
[   470.156] (II) event15 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[   470.156] (**) Option "fd" "33"
[   470.156] (II) event13 - Asus WMI hotkeys: device removed
[   470.156] (**) Option "fd" "34"
[   470.157] (II) event3  - AT Translated Set 2 keyboard: device removed
[   470.158] (II) UnloadModule: "synaptics"
[   470.158] (II) systemd-logind: releasing fd for 13:78
[   470.177] (II) UnloadModule: "libinput"
[   470.177] (II) systemd-logind: releasing fd for 13:67
[   470.194] (II) UnloadModule: "libinput"
[   470.194] (II) systemd-logind: releasing fd for 13:77
[   470.222] (II) UnloadModule: "libinput"
[   470.222] (II) systemd-logind: releasing fd for 13:79
[   470.244] (II) UnloadModule: "libinput"
[   470.244] (II) systemd-logind: releasing fd for 13:70
[   470.267] (II) UnloadModule: "libinput"
[   470.267] (II) systemd-logind: releasing fd for 13:69
[   470.286] (II) UnloadModule: "libinput"
[   470.286] (II) systemd-logind: releasing fd for 13:68
[   470.298] (II) UnloadModule: "libinput"
[   470.298] (II) systemd-logind: releasing fd for 13:65
[   470.310] (II) UnloadModule: "libinput"
[   470.310] (II) systemd-logind: releasing fd for 13:72
[   470.334] (II) UnloadModule: "libinput"
[   470.334] (II) systemd-logind: releasing fd for 13:71
[   470.358] (II) UnloadModule: "libinput"
[   470.358] (II) systemd-logind: releasing fd for 13:66
[   471.245] (II) Server terminated successfully (0). Closing log file.

I'm not seeing anyplace where it throws a specific error. It just suddenly starts unloading modules.

seth · 2018-03-27 17:46:49

Yes, whatever keeps the session up (I assume it's i3?) quits and the X11 server terminates (with xinit? using startx?)
Check your journal. In doubt, "startx xterm" and run i3 from the xterm. See what happens.

extrapalantine · 2018-03-27 18:17:15

Well that was certainly interesting. "startx xterm" tells me this:

X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64 
Current Operating System: Linux ben 4.15.12-1-ARCH #1 SMP PREEMPT Wed Mar 21 15:14:56 UTC 2018 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6
Build Date: 26 January 2018  10:25:18AM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 27 21:07:41 2018
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
i3: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory
xinit: connection to X server lost

waiting for X server to shut down .(II) Server terminated successfully (0). Closing log file.

Here's journalctl from the most recent boot. I see a lot of warnings, but nothing I'm familiar with as being relevant to the X server:

Mar 27 20:54:40 ben kernel: nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Mar 27 20:54:40 ben kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Mar 27 20:54:40 ben kernel: ACPI: AC Adapter [AC0] (on-line)
Mar 27 20:54:40 ben kernel: ACPI: Battery Slot [BAT0] (battery present)
Mar 27 20:54:40 ben kernel: input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input11
Mar 27 20:54:40 ben kernel: rtc_cmos 00:02: RTC can wake from S4
Mar 27 20:54:40 ben kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Mar 27 20:54:40 ben kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Mar 27 20:54:40 ben kernel: input: PC Speaker as /devices/platform/pcspkr/input/input16
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170831/utaddress-247)
Mar 27 20:54:40 ben kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 27 20:54:40 ben kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Mar 27 20:54:40 ben kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Mar 27 20:54:40 ben kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 27 20:54:40 ben kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
Mar 27 20:54:40 ben kernel: RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
Mar 27 20:54:40 ben kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
Mar 27 20:54:40 ben kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Mar 27 20:54:40 ben kernel: psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
Mar 27 20:54:40 ben kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
Mar 27 20:54:40 ben kernel: psmouse serio4: elantech: Elan sample query result 05, 24, 64
Mar 27 20:54:40 ben kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Mar 27 20:54:40 ben kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Mar 27 20:54:40 ben kernel: r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
Mar 27 20:54:40 ben kernel: r8169 0000:03:00.2 eth0: RTL8411 at 0x00000000f48dbfd1, 60:a4:4c:09:b7:47, XID 08800800 IRQ 27
Mar 27 20:54:40 ben kernel: r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Mar 27 20:54:40 ben kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Mar 27 20:54:40 ben kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Mar 27 20:54:40 ben kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Mar 27 20:54:40 ben kernel: cfg80211: failed to load regulatory.db
Mar 27 20:54:40 ben kernel: Linux agpgart interface v0.103
Mar 27 20:54:40 ben kernel: Bluetooth: Core ver 2.22
Mar 27 20:54:40 ben kernel: NET: Registered protocol family 31
Mar 27 20:54:40 ben kernel: Bluetooth: HCI device and connection manager initialized
Mar 27 20:54:40 ben kernel: Bluetooth: HCI socket layer initialized
Mar 27 20:54:40 ben kernel: Bluetooth: L2CAP socket layer initialized
Mar 27 20:54:40 ben kernel: Bluetooth: SCO socket layer initialized
Mar 27 20:54:40 ben kernel: ath: phy0: Disable PLL PowerSave
Mar 27 20:54:40 ben kernel: ath: phy0: ASPM enabled: 0x43
Mar 27 20:54:40 ben kernel: ath: EEPROM regdomain: 0x60
Mar 27 20:54:40 ben kernel: ath: EEPROM indicates we should expect a direct regpair map
Mar 27 20:54:40 ben kernel: ath: Country alpha2 being used: 00
Mar 27 20:54:40 ben kernel: ath: Regpair used: 0x60
Mar 27 20:54:40 ben kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mar 27 20:54:40 ben kernel: ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffff99fd01300000, irq=17
Mar 27 20:54:40 ben kernel: mousedev: PS/2 mouse device common for all mice
Mar 27 20:54:40 ben kernel: asus_wmi: ASUS WMI generic driver loaded
Mar 27 20:54:40 ben kernel: asus_wmi: Initialization: 0x1
Mar 27 20:54:40 ben kernel: asus_wmi: BIOS WMI version: 7.9
Mar 27 20:54:40 ben kernel: asus_wmi: SFUN value: 0x4a0877
Mar 27 20:54:40 ben kernel: input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input17
Mar 27 20:54:40 ben kernel: asus_wmi: Number of fans: 1
Mar 27 20:54:40 ben kernel: AVX version of gcm_enc/dec engaged.
Mar 27 20:54:40 ben kernel: AES CTR mode by8 optimization enabled
Mar 27 20:54:40 ben kernel: usbcore: registered new interface driver btusb
Mar 27 20:54:40 ben kernel: media: Linux media interface: v0.10
Mar 27 20:54:40 ben kernel: Adding 3999732k swap on /dev/sda3.  Priority:-2 extents:1 across:3999732k FS
Mar 27 20:54:40 ben kernel: usbcore: registered new interface driver ath3k
Mar 27 20:54:40 ben kernel: usb 1-1.1: USB disconnect, device number 3
Mar 27 20:54:40 ben kernel: [drm] Memory usable by graphics device = 2048M
Mar 27 20:54:40 ben kernel: checking generic (e0000000 410000) vs hw (e0000000 10000000)
Mar 27 20:54:40 ben kernel: fb: switching to inteldrmfb from EFI VGA
Mar 27 20:54:40 ben kernel: Console: switching to colour dummy device 80x25
Mar 27 20:54:40 ben kernel: [drm] Replacing VGA console driver
Mar 27 20:54:40 ben kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Mar 27 20:54:40 ben kernel: [drm] Driver supports precise vblank timestamp query.
Mar 27 20:54:40 ben kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Mar 27 20:54:40 ben kernel: [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
Mar 27 20:54:40 ben kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Mar 27 20:54:40 ben kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
Mar 27 20:54:40 ben kernel: snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Mar 27 20:54:40 ben kernel: usb 1-1.1: new full-speed USB device number 5 using ehci-pci
Mar 27 20:54:40 ben kernel: fbcon: inteldrmfb (fb0) is primary device
Mar 27 20:54:40 ben kernel: Console: switching to colour frame buffer device 170x48
Mar 27 20:54:40 ben kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
Mar 27 20:54:40 ben kernel: snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
Mar 27 20:54:40 ben kernel: Linux video capture interface: v2.00
Mar 27 20:54:40 ben kernel: iTCO_vendor_support: vendor-support=0
Mar 27 20:54:40 ben kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Mar 27 20:54:40 ben kernel: iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
Mar 27 20:54:40 ben kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar 27 20:54:40 ben kernel: r8169 0000:03:00.2 enp3s0f2: renamed from eth0
Mar 27 20:54:40 ben kernel: ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
Mar 27 20:54:40 ben kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
Mar 27 20:54:40 ben kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
Mar 27 20:54:40 ben kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
Mar 27 20:54:40 ben kernel: uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b354)
Mar 27 20:54:40 ben kernel: uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
Mar 27 20:54:40 ben kernel: uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized!
Mar 27 20:54:40 ben kernel: uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
Mar 27 20:54:40 ben kernel: input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22
Mar 27 20:54:40 ben kernel: usbcore: registered new interface driver uvcvideo
Mar 27 20:54:40 ben kernel: USB Video Class driver (1.1.1)
Mar 27 20:54:40 ben kernel: intel_rapl: Found RAPL domain package
Mar 27 20:54:40 ben kernel: intel_rapl: Found RAPL domain core
Mar 27 20:54:40 ben kernel: intel_rapl: Found RAPL domain uncore
Mar 27 20:54:40 ben kernel: intel_rapl: RAPL package 0 domain package locked by BIOS
Mar 27 20:54:35 ben mtp-probe[341]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3"
Mar 27 20:54:28 ben systemd[1]: Started Create System Users.
Mar 27 20:54:35 ben mtp-probe[340]: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3"
Mar 27 20:54:28 ben systemd[1]: Starting Create Static Device Nodes in /dev...
Mar 27 20:54:35 ben mtp-probe[339]: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4"
Mar 27 20:54:29 ben systemd[1]: Started Rebuild Hardware Database.
Mar 27 20:54:35 ben mtp-probe[339]: bus: 3, device: 4 was not an MTP device
Mar 27 20:54:29 ben systemd[1]: Started Create Static Device Nodes in /dev.
Mar 27 20:54:35 ben mtp-probe[341]: bus: 1, device: 4 was not an MTP device
Mar 27 20:54:29 ben systemd[1]: Starting udev Kernel Device Manager...
Mar 27 20:54:35 ben mtp-probe[340]: bus: 3, device: 3 was not an MTP device
Mar 27 20:54:30 ben systemd-udevd[277]: Specified group 'plugdev' unknown
Mar 27 20:54:40 ben systemd-fsck[422]: /dev/sda4: recovering journal
Mar 27 20:54:31 ben systemd-udevd[277]: Invalid rule /etc/udev/rules.d/99-android.rules:2: unknown key 'SYSFS{idVendor}'
Mar 27 20:54:31 ben systemd[1]: Started udev Kernel Device Manager.
Mar 27 20:54:34 ben systemd[1]: Started CLI Netfilter Manager.
Mar 27 20:54:35 ben systemd-udevd[295]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Mar 27 20:54:36 ben systemd[1]: Found device HGST_HTS541075A9E680 3.
Mar 27 20:54:36 ben systemd[1]: Activating swap Swap Partition...
Mar 27 20:54:37 ben systemd[1]: Activated swap Swap Partition.
Mar 27 20:54:37 ben systemd[1]: Reached target Swap.
Mar 27 20:54:37 ben systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Mar 27 20:54:37 ben systemd[1]: Mounting Temporary Directory (/tmp)...
Mar 27 20:54:37 ben systemd[1]: Mounted Temporary Directory (/tmp).
Mar 27 20:54:37 ben systemd[1]: Found device HGST_HTS541075A9E680 4.
Mar 27 20:54:38 ben systemd-udevd[298]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Mar 27 20:54:38 ben systemd-udevd[298]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Mar 27 20:54:38 ben systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Mar 27 20:54:38 ben systemd[1]: Found device AR9485 Wireless Network Adapter.
Mar 27 20:54:38 ben systemd[1]: Reached target Local File Systems (Pre).
Mar 27 20:54:38 ben systemd[1]: Starting File System Check on /dev/disk/by-uuid/0fb85500-ead5-4900-a902-1f05f538e532...
Mar 27 20:54:38 ben systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Mar 27 20:54:38 ben systemd[1]: Starting Load/Save RF Kill Switch Status...
Mar 27 20:54:38 ben systemd[1]: Started Load/Save RF Kill Switch Status.
Mar 27 20:54:38 ben systemd[1]: Created slice system-systemd\x2dbacklight.slice.
Mar 27 20:54:38 ben systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
Mar 27 20:54:39 ben systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
Mar 27 20:54:40 ben systemd[1]: Started Flush Journal to Persistent Storage.
Mar 27 20:54:43 ben kernel: usb 1-1.1: device descriptor read/64, error -110
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801944 (uid=1000, gid=1000, mode=0100664, size=32768)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801943 (uid=1000, gid=1000, mode=0100600, size=2997036)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801928 (uid=1000, gid=1000, mode=0100664, size=37080)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801917 (uid=1000, gid=1000, mode=0100600, size=4096)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19794782 (uid=1000, gid=1000, mode=0100664, size=37080)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801914 (uid=1000, gid=1000, mode=0100664, size=32768)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801913 (uid=1000, gid=1000, mode=0100600, size=2993972)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: Clearing orphaned inode 19801916 (uid=1000, gid=1000, mode=0100664, size=37080)
Mar 27 20:54:45 ben systemd-fsck[422]: /dev/sda4: clean, 503093/42467328 files, 98844743/169839616 blocks
Mar 27 20:54:48 ben systemd[1]: Started File System Check on /dev/disk/by-uuid/0fb85500-ead5-4900-a902-1f05f538e532.
Mar 27 20:54:48 ben systemd[1]: Mounting /home...
Mar 27 20:54:48 ben kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
Mar 27 20:54:48 ben systemd[1]: Mounted /home.
Mar 27 20:54:48 ben systemd[1]: Reached target Local File Systems.
Mar 27 20:54:48 ben systemd[1]: Starting Rebuild Dynamic Linker Cache...
Mar 27 20:54:48 ben systemd[1]: Starting Rebuild Journal Catalog...
Mar 27 20:54:48 ben systemd[1]: Starting Create Volatile Files and Directories...
Mar 27 20:54:48 ben kernel: usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
Mar 27 20:54:48 ben kernel: usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 20:54:48 ben kernel: usb 1-1.1: Product: Bluetooth USB Host Controller
Mar 27 20:54:48 ben kernel: usb 1-1.1: Manufacturer: Atheros Communications
Mar 27 20:54:48 ben kernel: usb 1-1.1: SerialNumber: Alaska Day 2006
Mar 27 20:54:48 ben systemd[1]: Starting Load/Save RF Kill Switch Status...
Mar 27 20:54:48 ben [452]: failed to execute '/usr/bin/hciconfig' '/usr/bin/hciconfig hci0 up': No such file or directory
Mar 27 20:54:48 ben systemd-udevd[447]: Process '/usr/bin/hciconfig hci0 up' failed with exit code 2.
Mar 27 20:54:49 ben systemd[1]: Started Rebuild Journal Catalog.
Mar 27 20:54:49 ben systemd[1]: Started Create Volatile Files and Directories.
Mar 27 20:54:49 ben systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Mar 27 20:54:49 ben systemd[1]: Reached target Bluetooth.
Mar 27 20:54:49 ben systemd[1]: Started Load/Save RF Kill Switch Status.
Mar 27 20:54:49 ben systemd[1]: Started Update UTMP about System Boot/Shutdown.
Mar 27 20:54:50 ben systemd[1]: Started Rebuild Dynamic Linker Cache.
Mar 27 20:54:50 ben systemd[1]: Starting Update is Completed...
Mar 27 20:54:50 ben systemd[1]: Started Update is Completed.
Mar 27 20:54:50 ben systemd[1]: Reached target System Initialization.
Mar 27 20:54:50 ben systemd[1]: Starting Docker Socket for the API.
Mar 27 20:54:50 ben systemd[1]: Listening on D-Bus System Message Bus Socket.
Mar 27 20:54:50 ben systemd[1]: Started Daily Cleanup of Temporary Directories.
Mar 27 20:54:50 ben systemd[1]: Started Daily verification of password and group files.
Mar 27 20:54:50 ben systemd[1]: Started Daily rotation of log files.
Mar 27 20:54:50 ben systemd[1]: Reached target Timers.
Mar 27 20:54:50 ben systemd[1]: Listening on Docker Socket for the API.
Mar 27 20:54:50 ben systemd[1]: Reached target Sockets.
Mar 27 20:54:50 ben systemd[1]: Reached target Basic System.
Mar 27 20:54:50 ben systemd[1]: Starting Automatic wireless network connection using netctl profiles...
Mar 27 20:54:50 ben systemd[1]: Starting Save/Restore Sound Card State...
Mar 27 20:54:50 ben systemd[1]: Started D-Bus System Message Bus.
Mar 27 20:54:50 ben systemd[1]: Starting Login Service...
Mar 27 20:54:50 ben systemd[1]: Starting Xbox controller driver daemon...
Mar 27 20:54:50 ben systemd[1]: Started Save/Restore Sound Card State.
Mar 27 20:54:50 ben systemd[1]: Reached target Sound Card.
Mar 27 20:54:50 ben dbus-daemon[458]: Encountered error 'Error in file /usr/share/dbus-1/system.d/org.freedesktop.PackageKit.conf, line 1, column 0: no element found
                                      ' while parsing '/usr/share/dbus-1/system.d/org.freedesktop.PackageKit.conf'
Mar 27 20:54:50 ben dbus-daemon[458]: dbus-daemon[458]: Encountered error 'Error in file /usr/share/dbus-1/system.d/org.freedesktop.PackageKit.conf, line 1, column 0: no element found
Mar 27 20:54:50 ben dbus-daemon[458]: ' while parsing '/usr/share/dbus-1/system.d/org.freedesktop.PackageKit.conf'
Mar 27 20:54:50 ben systemd-logind[459]: New seat seat0.
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event2 (Power Button)
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event0 (Lid Switch)
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event1 (Sleep Button)
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event4 (CM Storm QuickFire Rapid keyboard)
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event5 (CM Storm QuickFire Rapid keyboard)
Mar 27 20:54:50 ben systemd-logind[459]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard)
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-BoxByTELMA-ELV5YS'
Mar 27 20:54:51 ben systemd[1]: xboxdrv.service: Can't open PID file /var/run/xboxdrv.pid (yet?) after start: No such file or directory
Mar 27 20:54:51 ben systemd[1]: Started Login Service.
Mar 27 20:54:51 ben systemd[1]: Started Xbox controller driver daemon.
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-Gower access'
Mar 27 20:54:51 ben kernel: input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input23
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-Chalet des Roses'
Mar 27 20:54:51 ben kernel: input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input24
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-ZyXEL_9819'
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-Hotel Verde Guest Internet'
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-Gower Internet_EXT'
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-SM-G935W85982'
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-Sabi Sabi'
Mar 27 20:54:51 ben netctl-auto[456]: Included profile 'wlp2s0-virginmedia9879749'
Mar 27 20:54:51 ben kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Mar 27 20:54:52 ben wpa_actiond[519]: Starting wpa_actiond session for interface 'wlp2s0'
Mar 27 20:54:52 ben systemd[1]: Started Automatic wireless network connection using netctl profiles.
Mar 27 20:54:52 ben systemd[1]: Reached target Network.
Mar 27 20:54:52 ben systemd[1]: Reached target Network is Online.
Mar 27 20:54:52 ben systemd[1]: Starting Docker Application Container Engine...
Mar 27 20:54:52 ben systemd[1]: Starting Permit User Sessions...
Mar 27 20:54:52 ben systemd[1]: Started Permit User Sessions.
Mar 27 20:54:52 ben systemd[1]: Started Getty on tty1.
Mar 27 20:54:52 ben systemd[1]: Reached target Login Prompts.
Mar 27 20:54:53 ben kernel: wlp2s0: authenticate with 94:10:3e:a8:ab:16
Mar 27 20:54:53 ben kernel: wlp2s0: send auth to 94:10:3e:a8:ab:16 (try 1/3)
Mar 27 20:54:53 ben kernel: wlp2s0: authenticated
Mar 27 20:54:53 ben kernel: wlp2s0: associate with 94:10:3e:a8:ab:16 (try 1/3)
Mar 27 20:54:53 ben kernel: wlp2s0: RX AssocResp from 94:10:3e:a8:ab:16 (capab=0x431 status=0 aid=1)
Mar 27 20:54:53 ben kernel: wlp2s0: associated
Mar 27 20:54:53 ben wpa_actiond[519]: Interface 'wlp2s0' connected to network 'Chalet des Roses'
Mar 27 20:54:53 ben kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Mar 27 20:54:54 ben kernel: 8021q: 802.1Q VLAN Support v1.8
Mar 27 20:54:54 ben dhcpcd[542]: DUID 00:01:00:01:22:26:6d:89:6c:71:d9:5b:61:d9
Mar 27 20:54:54 ben dhcpcd[542]: wlp2s0: IAID d9:5b:61:d9
Mar 27 20:54:55 ben dhcpcd[542]: wlp2s0: soliciting a DHCP lease
Mar 27 20:54:55 ben dhcpcd[542]: wlp2s0: offered 192.168.1.45 from 192.168.1.221
Mar 27 20:54:55 ben dhcpcd[542]: wlp2s0: probing address 192.168.1.45/24
Mar 27 20:54:55 ben dockerd[520]: time="2018-03-27T21:54:55.603485535+02:00" level=info msg="libcontainerd: started new docker-containerd process" pid=555
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="starting containerd" module=containerd revision=cfd04396dc68220d1cecbe686a6cc3aa5ce3667c version=v1.0.2
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.content.v1.content"..." module=containerd type=io.containerd.content.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.snapshotter.v1.btrfs"..." module=containerd type=io.containerd.snapshotter.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=warning msg="failed to load plugin io.containerd.snapshotter.v1.btrfs" error="path /var/lib/docker/containerd/daemon/io.containerd.snapshotter.v1.btrfs must be a btrfs filesystem to be used with the btrfs snapshotter" module=containerd
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.snapshotter.v1.overlayfs"..." module=containerd type=io.containerd.snapshotter.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.metadata.v1.bolt"..." module=containerd type=io.containerd.metadata.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=warning msg="could not use snapshotter btrfs in metadata plugin" error="path /var/lib/docker/containerd/daemon/io.containerd.snapshotter.v1.btrfs must be a btrfs filesystem to be used with the btrfs snapshotter" module="containerd/io.containerd.metadata.v1.bolt"
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.differ.v1.walking"..." module=containerd type=io.containerd.differ.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.gc.v1.scheduler"..." module=containerd type=io.containerd.gc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.containers"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.content"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.diff"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.events"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.healthcheck"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.images"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.leases"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.namespaces"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.snapshots"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.monitor.v1.cgroups"..." module=containerd type=io.containerd.monitor.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.runtime.v1.linux"..." module=containerd type=io.containerd.runtime.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.tasks"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.version"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="loading plugin "io.containerd.grpc.v1.introspection"..." module=containerd type=io.containerd.grpc.v1
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg=serving... address="/var/run/docker/containerd/docker-containerd-debug.sock" module="containerd/debug"
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg=serving... address="/var/run/docker/containerd/docker-containerd.sock" module="containerd/grpc"
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56+02:00" level=info msg="containerd successfully booted in 0.111356s" module=containerd
Mar 27 20:54:56 ben dockerd[520]: time="2018-03-27T21:54:56.796591598+02:00" level=info msg="[graphdriver] using prior storage driver: overlay2"
Mar 27 20:54:57 ben dockerd[520]: time="2018-03-27T21:54:57.600971732+02:00" level=info msg="Graph migration to content-addressability took 0.00 seconds"
Mar 27 20:54:57 ben dockerd[520]: time="2018-03-27T21:54:57.601308695+02:00" level=warning msg="Your kernel does not support cgroup rt period"
Mar 27 20:54:57 ben dockerd[520]: time="2018-03-27T21:54:57.601326823+02:00" level=warning msg="Your kernel does not support cgroup rt runtime"
Mar 27 20:54:57 ben dockerd[520]: time="2018-03-27T21:54:57.616976473+02:00" level=info msg="Loading containers: start."
Mar 27 20:54:59 ben kernel: bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mar 27 20:54:59 ben kernel: Bridge firewalling registered
Mar 27 20:54:59 ben kernel: Initializing XFRM netlink socket
Mar 27 20:54:59 ben kernel: Netfilter messages via NETLINK v0.30.
Mar 27 20:54:59 ben kernel: ctnetlink v0.93: registering with nfnetlink.
Mar 27 20:54:59 ben dhcpcd[542]: docker0: new hardware address: 02:42:65:d7:69:92
Mar 27 20:54:59 ben systemd-udevd[623]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Mar 27 20:54:59 ben kernel: IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
Mar 27 20:55:00 ben dockerd[520]: time="2018-03-27T21:55:00.031609413+02:00" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address"
Mar 27 20:55:00 ben dhcpcd[542]: wlp2s0: leased 192.168.1.45 for 600 seconds
Mar 27 20:55:00 ben dhcpcd[542]: wlp2s0: adding route to 192.168.1.0/24
Mar 27 20:55:00 ben dhcpcd[542]: wlp2s0: adding default route via 192.168.1.221
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.36 DST=192.168.1.45 LEN=98 TOS=0x00 PREC=0x00 TTL=84 ID=57087 DF PROTO=TCP SPT=443 DPT=45925 WINDOW=2043 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.36 DST=192.168.1.45 LEN=83 TOS=0x00 PREC=0x00 TTL=84 ID=57088 DF PROTO=TCP SPT=443 DPT=45925 WINDOW=2043 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=157.240.20.19 DST=192.168.1.45 LEN=98 TOS=0x00 PREC=0x00 TTL=82 ID=18573 DF PROTO=TCP SPT=443 DPT=60693 WINDOW=172 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=157.240.20.19 DST=192.168.1.45 LEN=83 TOS=0x00 PREC=0x00 TTL=82 ID=18574 DF PROTO=TCP SPT=443 DPT=60693 WINDOW=172 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=93.184.220.29 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=39856 DF PROTO=TCP SPT=80 DPT=39625 WINDOW=285 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=93.184.220.29 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=22334 DF PROTO=TCP SPT=80 DPT=39624 WINDOW=285 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.8 DST=192.168.1.45 LEN=98 TOS=0x00 PREC=0x00 TTL=85 ID=58652 DF PROTO=TCP SPT=443 DPT=33087 WINDOW=1305 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.8 DST=192.168.1.45 LEN=83 TOS=0x00 PREC=0x00 TTL=85 ID=58653 DF PROTO=TCP SPT=443 DPT=33087 WINDOW=1305 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.8 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=85 ID=58654 DF PROTO=TCP SPT=443 DPT=33087 WINDOW=1305 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=93.184.220.29 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=39857 DF PROTO=TCP SPT=80 DPT=39625 WINDOW=285 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=157.240.20.19 DST=192.168.1.45 LEN=129 TOS=0x00 PREC=0x00 TTL=82 ID=18578 DF PROTO=TCP SPT=443 DPT=60693 WINDOW=172 RES=0x00 ACK PSH FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=93.184.220.29 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=22335 DF PROTO=TCP SPT=80 DPT=39624 WINDOW=285 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:00 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.36 DST=192.168.1.45 LEN=129 TOS=0x00 PREC=0x00 TTL=84 ID=57092 DF PROTO=TCP SPT=443 DPT=45925 WINDOW=2043 RES=0x00 ACK PSH FIN URGP=0 
Mar 27 20:55:01 ben dhcpcd[542]: forked to background, child pid 726
Mar 27 20:55:01 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.8 DST=192.168.1.45 LEN=52 TOS=0x00 PREC=0x00 TTL=85 ID=58655 DF PROTO=TCP SPT=443 DPT=33087 WINDOW=1305 RES=0x00 ACK FIN URGP=0 
Mar 27 20:55:01 ben dockerd[520]: time="2018-03-27T21:55:01.292708389+02:00" level=info msg="Loading containers: done."
Mar 27 20:55:01 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.12 DST=192.168.1.45 LEN=129 TOS=0x00 PREC=0x00 TTL=84 ID=36487 DF PROTO=TCP SPT=443 DPT=42538 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
Mar 27 20:55:02 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=157.240.2.25 DST=192.168.1.45 LEN=129 TOS=0x00 PREC=0x00 TTL=78 ID=4055 DF PROTO=TCP SPT=443 DPT=50257 WINDOW=126 RES=0x00 ACK PSH FIN URGP=0 
Mar 27 20:55:02 ben login[522]: pam_unix(login:session): session opened for user ben by LOGIN(uid=0)
Mar 27 20:55:02 ben systemd[1]: Created slice User Slice of ben.
Mar 27 20:55:02 ben systemd[1]: Starting User Manager for UID 1000...
Mar 27 20:55:02 ben systemd-logind[459]: New session c1 of user ben.
Mar 27 20:55:02 ben systemd[1]: Started Session c1 of user ben.
Mar 27 20:55:02 ben systemd[728]: pam_unix(systemd-user:session): session opened for user ben by (uid=0)
Mar 27 20:55:02 ben dockerd[520]: time="2018-03-27T21:55:02.828345310+02:00" level=warning msg="Not using native diff for overlay2, this may cause degraded performance for building images: kernel has CONFIG_OVERLAY_FS_REDIRECT_DIR enabled"
Mar 27 20:55:03 ben systemd[728]: Reached target Timers.
Mar 27 20:55:04 ben dockerd[520]: time="2018-03-27T21:55:03.846247960+02:00" level=info msg="Docker daemon" commit=0520e24302 graphdriver(s)=overlay2 version=18.03.0-ce
Mar 27 20:55:04 ben dockerd[520]: time="2018-03-27T21:55:03.893998178+02:00" level=info msg="Daemon has completed initialization"
Mar 27 20:55:04 ben dockerd[520]: time="2018-03-27T21:55:03.931341062+02:00" level=info msg="API listen on /var/run/docker.sock"
Mar 27 20:55:03 ben systemd[728]: Listening on GnuPG network certificate management daemon.
Mar 27 20:55:03 ben login[522]: LOGIN ON tty1 BY ben
Mar 27 20:55:03 ben systemd[728]: Listening on Sound System.
Mar 27 20:55:03 ben systemd[728]: Listening on GnuPG cryptographic agent and passphrase cache.
Mar 27 20:55:03 ben systemd[728]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Mar 27 20:55:03 ben systemd[728]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Mar 27 20:55:03 ben systemd[728]: Starting D-Bus User Message Bus Socket.
Mar 27 20:55:03 ben systemd[728]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Mar 27 20:55:03 ben systemd[728]: Reached target Paths.
Mar 27 20:55:03 ben systemd[728]: Listening on D-Bus User Message Bus Socket.
Mar 27 20:55:03 ben systemd[728]: Reached target Sockets.
Mar 27 20:55:03 ben systemd[728]: Reached target Basic System.
Mar 27 20:55:03 ben systemd[728]: Reached target Default.
Mar 27 20:55:03 ben systemd[728]: Startup finished in 719ms.
Mar 27 20:55:03 ben systemd[1]: Started User Manager for UID 1000.
Mar 27 20:55:03 ben systemd[1]: Started Docker Application Container Engine.
Mar 27 20:55:03 ben systemd[1]: Reached target Multi-User System.
Mar 27 20:55:03 ben systemd[1]: Reached target Graphical Interface.
Mar 27 20:55:03 ben systemd[1]: Startup finished in 5.176s (firmware) + 3.312s (loader) + 309ms (kernel) + 3.818s (initrd) + 40.803s (userspace) = 53.421s.
Mar 27 20:55:07 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=172.217.18.229 DST=192.168.1.45 LEN=111 TOS=0x00 PREC=0x00 TTL=54 ID=18572 PROTO=TCP SPT=443 DPT=59190 WINDOW=811 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:09 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=74.125.133.189 DST=192.168.1.45 LEN=554 TOS=0x00 PREC=0x00 TTL=42 ID=36837 PROTO=TCP SPT=443 DPT=46293 WINDOW=268 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:11 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=31.13.75.12 DST=192.168.1.45 LEN=116 TOS=0x00 PREC=0x00 TTL=84 ID=36488 DF PROTO=TCP SPT=443 DPT=42538 WINDOW=131 RES=0x00 ACK URGP=0 
Mar 27 20:55:12 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=172.217.18.238 DST=192.168.1.45 LEN=257 TOS=0x00 PREC=0x00 TTL=54 ID=21438 PROTO=TCP SPT=443 DPT=46879 WINDOW=559 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:14 ben systemd[728]: Started D-Bus User Message Bus.
Mar 27 20:55:37 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=172.217.18.229 DST=192.168.1.45 LEN=111 TOS=0x00 PREC=0x00 TTL=54 ID=35100 PROTO=TCP SPT=443 DPT=59190 WINDOW=811 RES=0x00 ACK PSH URGP=0 
Mar 27 20:55:41 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=172.217.18.238 DST=192.168.1.45 LEN=257 TOS=0x00 PREC=0x00 TTL=54 ID=38065 PROTO=TCP SPT=443 DPT=46879 WINDOW=559 RES=0x00 ACK PSH URGP=0 
Mar 27 20:56:07 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=172.217.18.229 DST=192.168.1.45 LEN=111 TOS=0x00 PREC=0x00 TTL=54 ID=52779 PROTO=TCP SPT=443 DPT=59190 WINDOW=811 RES=0x00 ACK PSH URGP=0 
Mar 27 20:56:54 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=192.0.73.2 DST=192.168.1.45 LEN=86 TOS=0x00 PREC=0x00 TTL=47 ID=41075 DF PROTO=TCP SPT=443 DPT=39341 WINDOW=66 RES=0x00 ACK PSH URGP=0 
Mar 27 20:56:54 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=192.0.73.2 DST=192.168.1.45 LEN=71 TOS=0x00 PREC=0x00 TTL=47 ID=41076 DF PROTO=TCP SPT=443 DPT=39341 WINDOW=66 RES=0x00 ACK PSH URGP=0 
Mar 27 20:57:01 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=5.9.250.164 DST=192.168.1.45 LEN=90 TOS=0x00 PREC=0x00 TTL=46 ID=40571 DF PROTO=TCP SPT=443 DPT=40310 WINDOW=285 RES=0x00 ACK PSH URGP=0 
Mar 27 20:57:07 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=5.9.250.164 DST=192.168.1.45 LEN=113 TOS=0x00 PREC=0x00 TTL=46 ID=40577 DF PROTO=TCP SPT=443 DPT=40310 WINDOW=285 RES=0x00 ACK PSH FIN URGP=0 
Mar 27 20:57:13 ben kernel: [UFW BLOCK] IN=wlp2s0 OUT= MAC=6c:71:d9:5b:61:d9:e4:8d:8c:07:e3:45:08:00 SRC=5.9.250.164 DST=192.168.1.45 LEN=113 TOS=0x00 PREC=0x00 TTL=46 ID=40578 DF PROTO=TCP SPT=443 DPT=40310 WINDOW=285 RES=0x00 ACK PSH FIN URGP=0

seth · 2018-03-27 18:28:24

You still got the ~/.xinitrc (sorry, should have mentioned that), however:

i3: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory

So much for

I've fixed the broken fontconfig install

;-P

extrapalantine · 2018-03-27 18:39:07

Yes, you're exactly right! But I've already done a "pacman -Rns lib32-fontconfig" and reinstalled it, and I'm still getting this issue. Is there some reason libfontconfig.so isn't being created?

seth · 2018-03-27 18:41:51

Why would that be a 32bit library? i3 is x86_64.

extrapalantine · 2018-03-27 19:44:01

Yep, that was it! I'd been reinstalling lib32-fontconfig, and couldn't understand why it wasn't working.

I forced a pacman upgrade of my broken fontconfig, and then X started successfully.

Thank you very much for your help, seth.

seth · 2018-03-28 13:25:12

Cool. Please alwas remember to mark [SOLVED] threads by editing your initial posts subject. Thanks.

Arch Linux

#1 2018-03-27 15:30:49

"Cannot connect to X server" after upgrade

#2 2018-03-27 16:38:06

Re: "Cannot connect to X server" after upgrade

#3 2018-03-27 17:43:34

Re: "Cannot connect to X server" after upgrade

#4 2018-03-27 17:46:49

Re: "Cannot connect to X server" after upgrade

#5 2018-03-27 18:17:15

Re: "Cannot connect to X server" after upgrade

#6 2018-03-27 18:28:24

Re: "Cannot connect to X server" after upgrade

#7 2018-03-27 18:39:07

Re: "Cannot connect to X server" after upgrade

#8 2018-03-27 18:41:51

Re: "Cannot connect to X server" after upgrade

#9 2018-03-27 19:44:01

Re: "Cannot connect to X server" after upgrade

#10 2018-03-28 13:25:12

Re: "Cannot connect to X server" after upgrade

Board footer