You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2018-03-30 05:16:51
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
[SOLVED] arch X awesome wm problem
I've been happily using Arch with Awesomewm for about 6 months.
Last night I did a pacman -Syyu as I often do and at some point I rebooted. I then could not startx. I was getting errors about pango, cairo.
After many hours of googling and trying various things, I installed freetype2 and I can now "startx" and see the desktop but the mouse and keyboard are not recognized. At that point I can see no other option but to reboot again. and again.
More experimenting and now I don't even get the awesome screen anymore. I've tried very many installs of all things related to xorg-server, awesome, fontconfig, etc. I'm stuck.
Here's my .xinitrc:
#!/bin/sh
#setxkbmap -option caps:escape &
#xmodmap -e "clear Lock"
#xmodmap -e "keycode 66 = Escape"
#setxkbmap -option caps:escape &
xmodmap .Xmodmap
[ -f ~/.xprofile ] && . ~/.xprofile
start-pulseaudio-X11
export BROWSER=chromium
#bgchd -dir ~/.wallpaper -intv 2m -bckend feh
exec awesomeAnd here's my Xorg.0.log:
[ 1145.055]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 1145.133] X Protocol Version 11, Revision 0
[ 1145.160] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[ 1145.190] Current Operating System: Linux arch-desktop 4.15.13-1-ARCH #1 SMP PREEMPT Sun Mar 25 11:27:57 UTC 2018 x86_64
[ 1145.191] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a55c7b6-4da8-4bb8-8061-b847aeb17136 rw quiet
[ 1145.254] Build Date: 26 January 2018 10:25:18AM
[ 1145.285]
[ 1145.318] Current version of pixman: 0.34.0
[ 1145.385] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1145.385] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1145.532] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 29 21:59:31 2018
[ 1145.571] (==) Using config file: "/etc/X11/xorg.conf"
[ 1145.610] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1145.611] (==) ServerLayout "Layout0"
[ 1145.611] (**) |-->Screen "Screen0" (0)
[ 1145.611] (**) | |-->Monitor "Monitor0"
[ 1145.611] (**) | |-->Device "Device0"
[ 1145.611] (**) |-->Input Device "Keyboard0"
[ 1145.611] (**) |-->Input Device "Mouse0"
[ 1145.611] (==) Automatically adding devices
[ 1145.611] (==) Automatically enabling devices
[ 1145.611] (==) Automatically adding GPU devices
[ 1145.611] (==) Automatically binding GPU devices
[ 1145.611] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1145.611] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1145.611] Entry deleted from font path.
[ 1145.611] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1145.611] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1145.611] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1145.611] (WW) Disabling Keyboard0
[ 1145.611] (WW) Disabling Mouse0
[ 1145.611] (II) Loader magic: 0x562b410b3d60
[ 1145.611] (II) Module ABI versions:
[ 1145.611] X.Org ANSI C Emulation: 0.4
[ 1145.611] X.Org Video Driver: 23.0
[ 1145.611] X.Org XInput driver : 24.1
[ 1145.611] X.Org Server Extension : 10.0
[ 1145.612] (++) using VT number 1
[ 1145.615] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 1145.615] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1145.616] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 1145.618] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1145.618] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 1145.620] (--) PCI:*(0:4:0:0) 10de:1401:1043:8520 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 1145.620] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1145.620] (II) LoadModule: "glx"
[ 1145.621] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 1145.624] (II) Module glx: vendor="NVIDIA Corporation"
[ 1145.624] compiled for 4.0.2, module version = 1.0.0
[ 1145.624] Module class: X.Org Server Extension
[ 1145.624] (II) NVIDIA GLX Module 390.48 Wed Mar 21 23:42:56 PDT 2018
[ 1145.624] (II) LoadModule: "nvidia"
[ 1145.624] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1145.625] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1145.625] compiled for 4.0.2, module version = 1.0.0
[ 1145.625] Module class: X.Org Video Driver
[ 1145.625] (II) NVIDIA dlloader X Driver 390.48 Wed Mar 21 23:18:15 PDT 2018
[ 1145.625] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1145.625] (II) systemd-logind: releasing fd for 226:0
[ 1145.626] (II) Loading sub module "fb"
[ 1145.626] (II) LoadModule: "fb"
[ 1145.626] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1145.626] (II) Module fb: vendor="X.Org Foundation"
[ 1145.626] compiled for 1.19.6, module version = 1.0.0
[ 1145.626] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1145.626] (II) Loading sub module "wfb"
[ 1145.626] (II) LoadModule: "wfb"
[ 1145.626] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1145.626] (II) Module wfb: vendor="X.Org Foundation"
[ 1145.626] compiled for 1.19.6, module version = 1.0.0
[ 1145.626] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1145.626] (II) Loading sub module "ramdac"
[ 1145.626] (II) LoadModule: "ramdac"
[ 1145.626] (II) Module "ramdac" already built-in
[ 1145.627] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1145.627] (==) NVIDIA(0): RGB weight 888
[ 1145.627] (==) NVIDIA(0): Default visual is TrueColor
[ 1145.627] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1145.627] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 1145.627] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 1145.627] (**) NVIDIA(0): Enabling 2D acceleration
[ 1146.225] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:4:0:0
[ 1146.225] (--) NVIDIA(0): CRT-0
[ 1146.225] (--) NVIDIA(0): DFP-0 (boot)
[ 1146.225] (--) NVIDIA(0): DFP-1
[ 1146.225] (--) NVIDIA(0): DFP-2
[ 1146.225] (--) NVIDIA(0): DFP-3
[ 1146.225] (--) NVIDIA(0): DFP-4
[ 1146.225] (--) NVIDIA(0): DFP-5 (boot)
[ 1146.225] (--) NVIDIA(0): DFP-6
[ 1146.225] (--) NVIDIA(0): DFP-7
[ 1146.227] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960 (GM206-A) at PCI:4:0:0 (GPU-0)
[ 1146.227] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 1146.227] (--) NVIDIA(0): VideoBIOS: 84.06.0d.00.02
[ 1146.227] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1146.243] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 1146.243] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 1146.243] (--) NVIDIA(GPU-0):
[ 1146.275] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): connected
[ 1146.275] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): Internal TMDS
[ 1146.275] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): 330.0 MHz maximum pixel clock
[ 1146.275] (--) NVIDIA(GPU-0):
[ 1146.275] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 1146.275] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 1146.275] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[ 1146.275] (--) NVIDIA(GPU-0):
[ 1146.275] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 1146.275] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 1146.275] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1146.275] (--) NVIDIA(GPU-0):
[ 1146.275] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 1146.275] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 1146.275] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 1146.275] (--) NVIDIA(GPU-0):
[ 1146.275] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 1146.275] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 1146.275] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 1146.275] (--) NVIDIA(GPU-0):
[ 1146.306] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): connected
[ 1146.306] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): Internal TMDS
[ 1146.306] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): 600.0 MHz maximum pixel clock
[ 1146.306] (--) NVIDIA(GPU-0):
[ 1146.306] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 1146.306] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 1146.306] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 1146.306] (--) NVIDIA(GPU-0):
[ 1146.306] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 1146.306] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 1146.306] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 1146.306] (--) NVIDIA(GPU-0):
[ 1146.312] (==) NVIDIA(0):
[ 1146.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1146.312] (==) NVIDIA(0): will be used as the requested mode.
[ 1146.312] (==) NVIDIA(0):
[ 1146.313] (II) NVIDIA(0): Validated MetaModes:
[ 1146.313] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 1146.313] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 1146.317] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 1146.317] (--) NVIDIA(0): option
[ 1146.317] (--) Depth 24 pixmap format is 32 bpp
[ 1146.317] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 1146.317] (II) NVIDIA: access.
[ 1146.320] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1146.320] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1146.320] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1146.320] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1146.320] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1146.320] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1146.320] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1146.320] (II) NVIDIA(0): Config Options in the README.
[ 1146.346] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 1146.477] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1146.477] (==) NVIDIA(0): Backing store enabled
[ 1146.477] (==) NVIDIA(0): Silken mouse enabled
[ 1146.478] (**) NVIDIA(0): DPMS enabled
[ 1146.478] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 1146.478] (II) Loading sub module "dri2"
[ 1146.478] (II) LoadModule: "dri2"
[ 1146.478] (II) Module "dri2" already built-in
[ 1146.478] (II) NVIDIA(0): [DRI2] Setup complete
[ 1146.478] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1146.478] (--) RandR disabled
[ 1146.480] (II) Initializing extension GLX
[ 1146.480] (II) Indirect GLX disabled.
[ 1146.572] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1146.572] (II) No input driver specified, ignoring this device.
[ 1146.572] (II) This device may have been added with another device file.
[ 1146.573] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1146.573] (II) No input driver specified, ignoring this device.
[ 1146.573] (II) This device may have been added with another device file.
[ 1146.573] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 1146.573] (II) No input driver specified, ignoring this device.
[ 1146.573] (II) This device may have been added with another device file.
[ 1146.573] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 1146.573] (II) No input driver specified, ignoring this device.
[ 1146.573] (II) This device may have been added with another device file.
[ 1146.574] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 1146.574] (II) No input driver specified, ignoring this device.
[ 1146.574] (II) This device may have been added with another device file.
[ 1146.574] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 1146.574] (II) No input driver specified, ignoring this device.
[ 1146.574] (II) This device may have been added with another device file.
[ 1146.574] (II) config/udev: Adding input device Burr-Brown from TI USB Audio CODEC (/dev/input/event2)
[ 1146.574] (II) No input driver specified, ignoring this device.
[ 1146.574] (II) This device may have been added with another device file.
[ 1146.575] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)
[ 1146.575] (II) No input driver specified, ignoring this device.
[ 1146.575] (II) This device may have been added with another device file.
[ 1146.575] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 1146.575] (II) No input driver specified, ignoring this device.
[ 1146.575] (II) This device may have been added with another device file.
[ 1146.575] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event12)
[ 1146.575] (II) No input driver specified, ignoring this device.
[ 1146.575] (II) This device may have been added with another device file.
[ 1146.575] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event13)
[ 1146.575] (II) No input driver specified, ignoring this device.
[ 1146.575] (II) This device may have been added with another device file.
[ 1146.576] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event14)
[ 1146.576] (II) No input driver specified, ignoring this device.
[ 1146.576] (II) This device may have been added with another device file.
[ 1146.576] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[ 1146.576] (II) No input driver specified, ignoring this device.
[ 1146.576] (II) This device may have been added with another device file.
[ 1146.576] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 1146.576] (II) No input driver specified, ignoring this device.
[ 1146.576] (II) This device may have been added with another device file.
[ 1146.576] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 1146.576] (II) No input driver specified, ignoring this device.
[ 1146.576] (II) This device may have been added with another device file.
[ 1146.577] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 1146.577] (II) No input driver specified, ignoring this device.
[ 1146.577] (II) This device may have been added with another device file.
[ 1146.577] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 1146.577] (II) No input driver specified, ignoring this device.
[ 1146.577] (II) This device may have been added with another device file.
[ 1146.578] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 1146.578] (II) No input driver specified, ignoring this device.
[ 1146.578] (II) This device may have been added with another device file.
[ 1146.578] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/mouse0)
[ 1146.578] (II) No input driver specified, ignoring this device.
[ 1146.578] (II) This device may have been added with another device file.
[ 1146.579] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 1146.579] (II) No input driver specified, ignoring this device.
[ 1146.579] (II) This device may have been added with another device file.
[ 1146.592] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 1146.777] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 1147.551] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1147.825] (II) Server terminated successfully (0). Closing log file.TIA,
Chris
Last edited by chrisco23 (2018-04-01 20:58:32)
Offline
#2 2018-03-30 05:26:30
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
more info:
.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64
Current Operating System: Linux arch-desktop 4.15.13-1-ARCH #1 SMP PREEMPT Sun Mar 25 11:27:57 UTC 2018 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a55c7b6-4da8-4bb8-8061-b847aeb17136 rw quiet
Build Date: 26 January 2018 10:25:18AM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 29 22:17:59 2018
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
/home/fugbert/.xinitrc: line 8: start-pulseaudio-X11: command not found
/home/fugbert/.xinitrc: line 11: /usr/bin/awesome: Success
xinit: connection to X server lost
waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.and from lspci | grep VGA:
04:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)thx
Offline
#3 2018-03-30 06:50:55
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
Last night I did a pacman -Syyu
Don't do that - "yy" is for downgrades only and can seriously fuck up your pacman database (it usually won't, but it's a pointless risk)
On topic: X starts and terminates cleanly, what means the problem is w/ awesome.
Run eg. an xterm instead and start awesome from there, see whether it crashes. Also check your journal and coredumpctl.
Offline
#4 2018-03-30 07:11:25
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
Thanks for the reply. Assuming you mean just running "X" to get to an xterm, I get only black screens on my two monitors (my tv and my other monitor)
Offline
#5 2018-03-30 07:13:46
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
Replace "exec awesome" with "exec xterm", ensure you've "pacman -Qi xterm" installed.
Offline
#6 2018-03-30 07:40:23
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
Flashes to black screen before sending me to login. When I send the output (that goes by too fast) to a file I get:
xterm: Xt error: Can't open display:
xterm: DISPLAY is not set
This is where I'm confused. I did nothing at all with any dotfiles, configfiles, anything, last night. I did the update, and I rebooted, found myself in this situation.
Offline
#7 2018-03-30 07:48:08
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
The question is "what fails" and according to the posted log it's not the X11 server;
try just "xterm" (no exec), but afaiu from comment #4, you could run "just X" and then oc. also launch xterm/awesome from a tty (just "export DISPLAY=:0")?
Also try to move away the /etc/X11/xorg.conf file (nvidia autogenerated?), though if you can run "just X", this will unlikely be the offender.
Offline
#8 2018-03-30 07:51:56
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
Running just "xterm" gives same with/without exec. Running just "X" gives me two black screens with no control.
running export DISPLAY=:0, and then xterm, gives:
xterm: Xt error: Can't open display: :0
Offline
#9 2018-03-30 07:55:59
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
and I moved the xorg.conf out of the way but no change
Offline
#10 2018-03-30 08:20:18
- Mr.Elendig
- #archlinux@freenode channel op
- From: The intertubes
- Registered: 2004-11-07
- Posts: 4,097
Re: [SOLVED] arch X awesome wm problem
Post the log now without an xorg.conf, also post pacman -Qm
Last edited by Mr.Elendig (2018-03-30 08:20:38)
Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest
Offline
#11 2018-03-30 18:13:18
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
This morning after more attempts, cleaning/reinstalling awesome, etc, I can have either "exec awesome" or "exec xterm" in my .xinitrc, and both launch the expected displays, but in both cases, I can get no response from the keyboard nor mouse. Seemingly all I can do at that point is reboot the machine again.
Here's the latest log:
$ cat Xorg.0.log
[ 68.606]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 68.650] X Protocol Version 11, Revision 0
[ 68.666] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[ 68.684] Current Operating System: Linux arch-desktop 4.15.13-1-ARCH #1 SMP PREEMPT Sun Mar 25 11:27:57 UTC 2018 x86_64
[ 68.684] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a55c7b6-4da8-4bb8-8061-b847aeb17136 rw quiet
[ 68.718] Build Date: 26 January 2018 10:25:18AM
[ 68.733]
[ 68.749] Current version of pixman: 0.34.0
[ 68.785] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 68.785] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 68.869] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 11:02:49 2018
[ 68.895] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 68.896] (==) No Layout section. Using the first Screen section.
[ 68.896] (==) No screen section available. Using defaults.
[ 68.896] (**) |-->Screen "Default Screen Section" (0)
[ 68.896] (**) | |-->Monitor "<default monitor>"
[ 68.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 68.898] (==) Automatically adding devices
[ 68.898] (==) Automatically enabling devices
[ 68.898] (==) Automatically adding GPU devices
[ 68.898] (==) Automatically binding GPU devices
[ 68.898] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 68.902] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 68.902] Entry deleted from font path.
[ 68.905] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 68.905] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 68.905] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 68.905] (II) Loader magic: 0x564a9396ad60
[ 68.905] (II) Module ABI versions:
[ 68.905] X.Org ANSI C Emulation: 0.4
[ 68.905] X.Org Video Driver: 23.0
[ 68.905] X.Org XInput driver : 24.1
[ 68.905] X.Org Server Extension : 10.0
[ 68.906] (++) using VT number 1
[ 68.909] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 68.909] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 68.910] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 68.913] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 68.913] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 68.915] (--) PCI:*(0:4:0:0) 10de:1401:1043:8520 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 68.915] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 68.915] (II) LoadModule: "glx"
[ 68.917] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 69.017] (II) Module glx: vendor="NVIDIA Corporation"
[ 69.017] compiled for 4.0.2, module version = 1.0.0
[ 69.017] Module class: X.Org Server Extension
[ 69.018] (II) NVIDIA GLX Module 390.48 Wed Mar 21 23:42:56 PDT 2018
[ 69.019] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 69.019] loading driver: nvidia
[ 69.019] (==) Matched nvidia as autoconfigured driver 0
[ 69.019] (==) Matched nouveau as autoconfigured driver 1
[ 69.019] (==) Matched nv as autoconfigured driver 2
[ 69.019] (==) Matched nouveau as autoconfigured driver 3
[ 69.019] (==) Matched nv as autoconfigured driver 4
[ 69.019] (==) Matched modesetting as autoconfigured driver 5
[ 69.019] (==) Matched fbdev as autoconfigured driver 6
[ 69.019] (==) Matched vesa as autoconfigured driver 7
[ 69.019] (==) Assigned the driver to the xf86ConfigLayout
[ 69.019] (II) LoadModule: "nvidia"
[ 69.021] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 69.031] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 69.031] compiled for 4.0.2, module version = 1.0.0
[ 69.031] Module class: X.Org Video Driver
[ 69.031] (II) LoadModule: "nouveau"
[ 69.031] (WW) Warning, couldn't open module nouveau
[ 69.031] (II) UnloadModule: "nouveau"
[ 69.031] (II) Unloading nouveau
[ 69.031] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 69.031] (II) LoadModule: "nv"
[ 69.031] (WW) Warning, couldn't open module nv
[ 69.031] (II) UnloadModule: "nv"
[ 69.031] (II) Unloading nv
[ 69.031] (EE) Failed to load module "nv" (module does not exist, 0)
[ 69.031] (II) LoadModule: "modesetting"
[ 69.032] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 69.033] (II) Module modesetting: vendor="X.Org Foundation"
[ 69.033] compiled for 1.19.6, module version = 1.19.6
[ 69.033] Module class: X.Org Video Driver
[ 69.033] ABI class: X.Org Video Driver, version 23.0
[ 69.033] (II) LoadModule: "fbdev"
[ 69.033] (WW) Warning, couldn't open module fbdev
[ 69.033] (II) UnloadModule: "fbdev"
[ 69.033] (II) Unloading fbdev
[ 69.033] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 69.033] (II) LoadModule: "vesa"
[ 69.033] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 69.034] (II) Module vesa: vendor="X.Org Foundation"
[ 69.034] compiled for 1.19.6, module version = 2.4.0
[ 69.034] Module class: X.Org Video Driver
[ 69.034] ABI class: X.Org Video Driver, version 23.0
[ 69.036] (II) NVIDIA dlloader X Driver 390.48 Wed Mar 21 23:18:15 PDT 2018
[ 69.036] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 69.036] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 69.036] (II) VESA: driver for VESA chipsets: vesa
[ 69.036] (II) systemd-logind: releasing fd for 226:0
[ 69.038] (II) Loading sub module "fb"
[ 69.038] (II) LoadModule: "fb"
[ 69.038] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 69.040] (II) Module fb: vendor="X.Org Foundation"
[ 69.040] compiled for 1.19.6, module version = 1.0.0
[ 69.040] ABI class: X.Org ANSI C Emulation, version 0.4
[ 69.040] (II) Loading sub module "wfb"
[ 69.040] (II) LoadModule: "wfb"
[ 69.040] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 69.041] (II) Module wfb: vendor="X.Org Foundation"
[ 69.041] compiled for 1.19.6, module version = 1.0.0
[ 69.041] ABI class: X.Org ANSI C Emulation, version 0.4
[ 69.041] (II) Loading sub module "ramdac"
[ 69.041] (II) LoadModule: "ramdac"
[ 69.041] (II) Module "ramdac" already built-in
[ 69.044] (WW) Falling back to old probe method for modesetting
[ 69.044] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 69.044] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 69.044] (==) NVIDIA(0): RGB weight 888
[ 69.044] (==) NVIDIA(0): Default visual is TrueColor
[ 69.044] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 69.044] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 69.044] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 69.044] (**) NVIDIA(0): Enabling 2D acceleration
[ 69.861] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:4:0:0
[ 69.861] (--) NVIDIA(0): CRT-0
[ 69.861] (--) NVIDIA(0): DFP-0 (boot)
[ 69.861] (--) NVIDIA(0): DFP-1
[ 69.861] (--) NVIDIA(0): DFP-2
[ 69.861] (--) NVIDIA(0): DFP-3
[ 69.861] (--) NVIDIA(0): DFP-4
[ 69.861] (--) NVIDIA(0): DFP-5
[ 69.861] (--) NVIDIA(0): DFP-6
[ 69.861] (--) NVIDIA(0): DFP-7
[ 69.862] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960 (GM206-A) at PCI:4:0:0 (GPU-0)
[ 69.862] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 69.862] (--) NVIDIA(0): VideoBIOS: 84.06.0d.00.02
[ 69.862] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 69.878] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 69.878] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 69.878] (--) NVIDIA(GPU-0):
[ 69.910] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): connected
[ 69.910] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): Internal TMDS
[ 69.910] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): 330.0 MHz maximum pixel clock
[ 69.910] (--) NVIDIA(GPU-0):
[ 69.910] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 69.910] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 69.910] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[ 69.910] (--) NVIDIA(GPU-0):
[ 69.910] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 69.910] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 69.910] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 69.910] (--) NVIDIA(GPU-0):
[ 69.910] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 69.910] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 69.910] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 69.910] (--) NVIDIA(GPU-0):
[ 69.910] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 69.910] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 69.910] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 69.910] (--) NVIDIA(GPU-0):
[ 69.941] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): connected
[ 69.941] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): Internal TMDS
[ 69.941] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): 600.0 MHz maximum pixel clock
[ 69.941] (--) NVIDIA(GPU-0):
[ 69.941] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 69.941] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 69.941] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 69.941] (--) NVIDIA(GPU-0):
[ 69.942] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 69.942] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 69.942] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 69.942] (--) NVIDIA(GPU-0):
[ 69.948] (==) NVIDIA(0):
[ 69.948] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 69.948] (==) NVIDIA(0): will be used as the requested mode.
[ 69.948] (==) NVIDIA(0):
[ 69.948] (II) NVIDIA(0): Validated MetaModes:
[ 69.948] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 69.948] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 69.952] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 69.952] (--) NVIDIA(0): option
[ 69.952] (II) UnloadModule: "modesetting"
[ 69.952] (II) Unloading modesetting
[ 69.952] (II) UnloadModule: "vesa"
[ 69.952] (II) Unloading vesa
[ 69.952] (--) Depth 24 pixmap format is 32 bpp
[ 69.953] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 69.953] (II) NVIDIA: access.
[ 69.956] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 69.956] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 69.956] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 69.956] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 69.956] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 69.956] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 69.956] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 69.956] (II) NVIDIA(0): Config Options in the README.
[ 69.986] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 70.129] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 70.129] (==) NVIDIA(0): Backing store enabled
[ 70.129] (==) NVIDIA(0): Silken mouse enabled
[ 70.131] (==) NVIDIA(0): DPMS enabled
[ 70.131] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 70.131] (II) Loading sub module "dri2"
[ 70.131] (II) LoadModule: "dri2"
[ 70.131] (II) Module "dri2" already built-in
[ 70.131] (II) NVIDIA(0): [DRI2] Setup complete
[ 70.131] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 70.131] (--) RandR disabled
[ 70.134] (II) Initializing extension GLX
[ 70.134] (II) Indirect GLX disabled.
[ 70.277] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 70.277] (II) No input driver specified, ignoring this device.
[ 70.277] (II) This device may have been added with another device file.
[ 70.278] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 70.278] (II) No input driver specified, ignoring this device.
[ 70.278] (II) This device may have been added with another device file.
[ 70.279] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 70.279] (II) No input driver specified, ignoring this device.
[ 70.279] (II) This device may have been added with another device file.
[ 70.279] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 70.279] (II) No input driver specified, ignoring this device.
[ 70.279] (II) This device may have been added with another device file.
[ 70.280] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 70.280] (II) No input driver specified, ignoring this device.
[ 70.280] (II) This device may have been added with another device file.
[ 70.280] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 70.280] (II) No input driver specified, ignoring this device.
[ 70.280] (II) This device may have been added with another device file.
[ 70.281] (II) config/udev: Adding input device Burr-Brown from TI USB Audio CODEC (/dev/input/event2)
[ 70.281] (II) No input driver specified, ignoring this device.
[ 70.281] (II) This device may have been added with another device file.
[ 70.281] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)
[ 70.281] (II) No input driver specified, ignoring this device.
[ 70.281] (II) This device may have been added with another device file.
[ 70.282] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 70.282] (II) No input driver specified, ignoring this device.
[ 70.282] (II) This device may have been added with another device file.
[ 70.282] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event12)
[ 70.282] (II) No input driver specified, ignoring this device.
[ 70.282] (II) This device may have been added with another device file.
[ 70.283] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event13)
[ 70.283] (II) No input driver specified, ignoring this device.
[ 70.283] (II) This device may have been added with another device file.
[ 70.283] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event14)
[ 70.283] (II) No input driver specified, ignoring this device.
[ 70.283] (II) This device may have been added with another device file.
[ 70.283] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[ 70.283] (II) No input driver specified, ignoring this device.
[ 70.283] (II) This device may have been added with another device file.
[ 70.283] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 70.283] (II) No input driver specified, ignoring this device.
[ 70.283] (II) This device may have been added with another device file.
[ 70.284] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 70.284] (II) No input driver specified, ignoring this device.
[ 70.284] (II) This device may have been added with another device file.
[ 70.284] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 70.284] (II) No input driver specified, ignoring this device.
[ 70.284] (II) This device may have been added with another device file.
[ 70.285] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 70.285] (II) No input driver specified, ignoring this device.
[ 70.285] (II) This device may have been added with another device file.
[ 70.285] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 70.285] (II) No input driver specified, ignoring this device.
[ 70.285] (II) This device may have been added with another device file.
[ 70.286] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/mouse0)
[ 70.286] (II) No input driver specified, ignoring this device.
[ 70.286] (II) This device may have been added with another device file.
[ 70.286] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 70.286] (II) No input driver specified, ignoring this device.
[ 70.286] (II) This device may have been added with another device file.
[ 70.308] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 70.493] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 71.284] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 71.551] (II) Server terminated successfully (0). Closing log file.And here are the results of pacman -Qm:
$ cat pacman_qm.txt
brother-bradmin-light 1.20.0-1
dpkg 1.18.24-3
fonts-meta-base 1-2
freetype2-demos-infinality 2.9-2
freetype2-docs-infinality 2.9-2
google-chrome 62.0.3202.75-1
google-earth-pro 7.3.0.3832-1
gtkhotkey 0.2.1-9
jdk8 8u152-1
ld-lsb 3-7
libselinux 2.7-1
libsepol 2.7-1
libtxc_dxtn 1.0.1-6
maxthon-browser 1.0.5.3-1
openslp 2.0.0-2
packer 20150808-1
pkgbrowser 0.21-1
popcorntime 0.3.10-4
proggyfonts 0.2-1
python-autobgch 0.4-3
scid_vs_pc 4.18.1-2
scudcloud 2:1.63-1
snack 2.2.10-11
soulseekqt 20170830-2
spotify 1.0.70.399-1
tdom-git 0.8.3.r92.g363cbda-1
ttf-caladea 20130214-1
ttf-carlito 20130920-1
ttf-courier-prime 1.203-3
ttf-gelasio-ib 0.1-1
ttf-google-fonts-typewolf 17.11.git+2e2caa2-1
ttf-heuristica 1.0.2-3
ttf-meslo 1.2.1-1
ttf-monaco 6.1-3
ttf-nanum 2017-1
ttf-oswald 4.100-2
ttf-quintessential 1.001-4
ttf-signika 1.002-2
visual-studio-code-bin 1.20.1-1
vivaldi-snapshot 1.15.1099.3-1Offline
#12 2018-03-30 19:38:31
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
[ 70.285] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 70.285] (II) No input driver specified, ignoring this device.
[ 70.285] (II) This device may have been added with another device file.
[ 70.285] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 70.285] (II) No input driver specified, ignoring this device.
[ 70.285] (II) This device may have been added with another device file.
[ 70.286] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/mouse0)
[ 70.286] (II) No input driver specified, ignoring this device.pacman -Qs xf86-inputDid you have special input configuration in the (moved away) xorg.conf?
Offline
#13 2018-03-30 20:03:08
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
pacman -Qs xf86-input gives:
local/xf86-input-libinput 0.27.0-2 (xorg-drivers)
Generic input driver for the X.org server based on libinputI can't think of anything unusual I ever would have done as far as input in xorg.conf. The only slightly nonstandard things about my setup are that I've always mapped Caps Lock to ESC (for vim, etc) but I did that with a .Xmodmap:
! Esc on caps lock
remove Lock = Caps_Lock
keysym Caps_Lock = EscapeI've been running everything through a KVM switch but naturally I tried taking that out of the picture and got the same results.
One thing I should have mentioned is the original reason I rebooted on March 28 at 6am was because there was some strangeness with new browser windows not opening. I just wanted a clean slate. At that time I believe my nvidia drivers updated from nvidia-390.42-6-x86_64 to nvidia-390.48-1-x86_64. I don't know how or if this could relate to the current input problem though. In my various attempts I had tried to roll back the nvidia driver but I'm not 100% confident I did that correctly. Pacman rollbacks are something I haven't had to do before.
Offline
#14 2018-03-31 16:46:43
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
I can now run awesome on my desktop again, after installing
xf86-input-evdev
xf86-input-keyboard
xf86-input-mouse
Still doesn't make me feel too confident as I don't know why I would have to reinstall all these things, but so far it seems to be working.
Offline
#15 2018-03-31 19:58:14
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
Updated Xorg log?
Offline
#16 2018-03-31 22:53:18
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
The latest Xorg log:
$ cat Xorg.0.log.txt
[ 872.539]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 872.671] X Protocol Version 11, Revision 0
[ 872.716] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[ 872.763] Current Operating System: Linux arch-desktop 4.15.13-1-ARCH #1 SMP PREEMPT Sun Mar 25 11:27:57 UTC 2018 x86_64
[ 872.763] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a55c7b6-4da8-4bb8-8061-b847aeb17136 rw quiet
[ 872.859] Build Date: 26 January 2018 10:25:18AM
[ 872.906]
[ 872.955] Current version of pixman: 0.34.0
[ 873.053] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 873.053] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 873.257] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 31 09:41:29 2018
[ 873.310] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 873.310] (==) No Layout section. Using the first Screen section.
[ 873.310] (==) No screen section available. Using defaults.
[ 873.310] (**) |-->Screen "Default Screen Section" (0)
[ 873.310] (**) | |-->Monitor "<default monitor>"
[ 873.310] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 873.310] (==) Automatically adding devices
[ 873.310] (==) Automatically enabling devices
[ 873.310] (==) Automatically adding GPU devices
[ 873.310] (==) Automatically binding GPU devices
[ 873.310] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 873.310] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 873.310] Entry deleted from font path.
[ 873.310] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 873.310] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 873.310] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 873.310] (II) Loader magic: 0x55d749b67d60
[ 873.310] (II) Module ABI versions:
[ 873.310] X.Org ANSI C Emulation: 0.4
[ 873.310] X.Org Video Driver: 23.0
[ 873.310] X.Org XInput driver : 24.1
[ 873.310] X.Org Server Extension : 10.0
[ 873.311] (++) using VT number 1
[ 873.315] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 873.315] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 873.316] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 873.318] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 873.318] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 873.320] (--) PCI:*(0:4:0:0) 10de:1401:1043:8520 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 873.320] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 873.320] (II) LoadModule: "glx"
[ 873.320] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 873.324] (II) Module glx: vendor="NVIDIA Corporation"
[ 873.324] compiled for 4.0.2, module version = 1.0.0
[ 873.324] Module class: X.Org Server Extension
[ 873.324] (II) NVIDIA GLX Module 390.48 Wed Mar 21 23:42:56 PDT 2018
[ 873.324] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 873.324] loading driver: nvidia
[ 873.324] (==) Matched nvidia as autoconfigured driver 0
[ 873.324] (==) Matched nouveau as autoconfigured driver 1
[ 873.324] (==) Matched nv as autoconfigured driver 2
[ 873.324] (==) Matched nouveau as autoconfigured driver 3
[ 873.324] (==) Matched nv as autoconfigured driver 4
[ 873.324] (==) Matched modesetting as autoconfigured driver 5
[ 873.324] (==) Matched fbdev as autoconfigured driver 6
[ 873.324] (==) Matched vesa as autoconfigured driver 7
[ 873.324] (==) Assigned the driver to the xf86ConfigLayout
[ 873.324] (II) LoadModule: "nvidia"
[ 873.324] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 873.324] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 873.324] compiled for 4.0.2, module version = 1.0.0
[ 873.324] Module class: X.Org Video Driver
[ 873.324] (II) LoadModule: "nouveau"
[ 873.324] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 873.325] (II) Module nouveau: vendor="X.Org Foundation"
[ 873.325] compiled for 1.19.3, module version = 1.0.15
[ 873.325] Module class: X.Org Video Driver
[ 873.325] ABI class: X.Org Video Driver, version 23.0
[ 873.325] (II) LoadModule: "nv"
[ 873.325] (WW) Warning, couldn't open module nv
[ 873.325] (II) UnloadModule: "nv"
[ 873.325] (II) Unloading nv
[ 873.325] (EE) Failed to load module "nv" (module does not exist, 0)
[ 873.325] (II) LoadModule: "modesetting"
[ 873.325] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 873.325] (II) Module modesetting: vendor="X.Org Foundation"
[ 873.325] compiled for 1.19.6, module version = 1.19.6
[ 873.325] Module class: X.Org Video Driver
[ 873.325] ABI class: X.Org Video Driver, version 23.0
[ 873.325] (II) LoadModule: "fbdev"
[ 873.325] (WW) Warning, couldn't open module fbdev
[ 873.325] (II) UnloadModule: "fbdev"
[ 873.325] (II) Unloading fbdev
[ 873.325] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 873.325] (II) LoadModule: "vesa"
[ 873.325] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 873.325] (II) Module vesa: vendor="X.Org Foundation"
[ 873.325] compiled for 1.19.6, module version = 2.4.0
[ 873.325] Module class: X.Org Video Driver
[ 873.325] ABI class: X.Org Video Driver, version 23.0
[ 873.325] (II) NVIDIA dlloader X Driver 390.48 Wed Mar 21 23:18:15 PDT 2018
[ 873.326] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 873.326] (II) NOUVEAU driver
[ 873.326] (II) NOUVEAU driver for NVIDIA chipset families :
[ 873.326] RIVA TNT (NV04)
[ 873.326] RIVA TNT2 (NV05)
[ 873.326] GeForce 256 (NV10)
[ 873.326] GeForce 2 (NV11, NV15)
[ 873.326] GeForce 4MX (NV17, NV18)
[ 873.326] GeForce 3 (NV20)
[ 873.326] GeForce 4Ti (NV25, NV28)
[ 873.326] GeForce FX (NV3x)
[ 873.326] GeForce 6 (NV4x)
[ 873.326] GeForce 7 (G7x)
[ 873.326] GeForce 8 (G8x)
[ 873.326] GeForce GTX 200 (NVA0)
[ 873.326] GeForce GTX 400 (NVC0)
[ 873.326] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 873.326] (II) VESA: driver for VESA chipsets: vesa
[ 873.326] (II) systemd-logind: releasing fd for 226:0
[ 873.327] (II) Loading sub module "fb"
[ 873.327] (II) LoadModule: "fb"
[ 873.327] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 873.327] (II) Module fb: vendor="X.Org Foundation"
[ 873.327] compiled for 1.19.6, module version = 1.0.0
[ 873.327] ABI class: X.Org ANSI C Emulation, version 0.4
[ 873.327] (II) Loading sub module "wfb"
[ 873.327] (II) LoadModule: "wfb"
[ 873.327] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 873.327] (II) Module wfb: vendor="X.Org Foundation"
[ 873.327] compiled for 1.19.6, module version = 1.0.0
[ 873.327] ABI class: X.Org ANSI C Emulation, version 0.4
[ 873.327] (II) Loading sub module "ramdac"
[ 873.327] (II) LoadModule: "ramdac"
[ 873.327] (II) Module "ramdac" already built-in
[ 873.328] (WW) Falling back to old probe method for modesetting
[ 873.328] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 873.328] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 873.328] (==) NVIDIA(0): RGB weight 888
[ 873.328] (==) NVIDIA(0): Default visual is TrueColor
[ 873.328] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 873.328] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 873.328] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 873.328] (**) NVIDIA(0): Enabling 2D acceleration
[ 873.924] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:4:0:0
[ 873.924] (--) NVIDIA(0): CRT-0
[ 873.924] (--) NVIDIA(0): DFP-0 (boot)
[ 873.924] (--) NVIDIA(0): DFP-1
[ 873.924] (--) NVIDIA(0): DFP-2
[ 873.924] (--) NVIDIA(0): DFP-3
[ 873.924] (--) NVIDIA(0): DFP-4
[ 873.924] (--) NVIDIA(0): DFP-5 (boot)
[ 873.924] (--) NVIDIA(0): DFP-6
[ 873.924] (--) NVIDIA(0): DFP-7
[ 873.926] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960 (GM206-A) at PCI:4:0:0 (GPU-0)
[ 873.926] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 873.926] (--) NVIDIA(0): VideoBIOS: 84.06.0d.00.02
[ 873.926] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 873.942] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 873.942] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 873.942] (--) NVIDIA(GPU-0):
[ 873.973] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): connected
[ 873.973] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): Internal TMDS
[ 873.973] (--) NVIDIA(GPU-0): Acer G246HL (DFP-0): 330.0 MHz maximum pixel clock
[ 873.973] (--) NVIDIA(GPU-0):
[ 873.973] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 873.973] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 873.973] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[ 873.973] (--) NVIDIA(GPU-0):
[ 873.973] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 873.973] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 873.973] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 873.973] (--) NVIDIA(GPU-0):
[ 873.973] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 873.973] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 873.973] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 873.973] (--) NVIDIA(GPU-0):
[ 873.974] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 873.974] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 873.974] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[ 873.974] (--) NVIDIA(GPU-0):
[ 874.004] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): connected
[ 874.004] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): Internal TMDS
[ 874.004] (--) NVIDIA(GPU-0): TOSHIBA-TV (DFP-5): 600.0 MHz maximum pixel clock
[ 874.004] (--) NVIDIA(GPU-0):
[ 874.004] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 874.004] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 874.004] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 874.004] (--) NVIDIA(GPU-0):
[ 874.005] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 874.005] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 874.005] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 874.005] (--) NVIDIA(GPU-0):
[ 874.011] (==) NVIDIA(0):
[ 874.011] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 874.011] (==) NVIDIA(0): will be used as the requested mode.
[ 874.011] (==) NVIDIA(0):
[ 874.011] (II) NVIDIA(0): Validated MetaModes:
[ 874.011] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 874.011] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 874.015] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 874.015] (--) NVIDIA(0): option
[ 874.015] (II) UnloadModule: "nouveau"
[ 874.015] (II) Unloading nouveau
[ 874.015] (II) UnloadModule: "modesetting"
[ 874.015] (II) Unloading modesetting
[ 874.015] (II) UnloadModule: "vesa"
[ 874.015] (II) Unloading vesa
[ 874.015] (--) Depth 24 pixmap format is 32 bpp
[ 874.016] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 874.016] (II) NVIDIA: access.
[ 874.019] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 874.019] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 874.019] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 874.019] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 874.019] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 874.019] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 874.019] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 874.019] (II) NVIDIA(0): Config Options in the README.
[ 874.046] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-5:nvidia-auto-select"
[ 874.139] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 874.139] (==) NVIDIA(0): Backing store enabled
[ 874.139] (==) NVIDIA(0): Silken mouse enabled
[ 874.139] (==) NVIDIA(0): DPMS enabled
[ 874.140] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 874.140] (II) Loading sub module "dri2"
[ 874.140] (II) LoadModule: "dri2"
[ 874.140] (II) Module "dri2" already built-in
[ 874.140] (II) NVIDIA(0): [DRI2] Setup complete
[ 874.140] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 874.140] (--) RandR disabled
[ 874.142] (II) Initializing extension GLX
[ 874.142] (II) Indirect GLX disabled.
[ 874.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 874.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 874.240] (II) LoadModule: "evdev"
[ 874.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 874.241] (II) Module evdev: vendor="X.Org Foundation"
[ 874.241] compiled for 1.19.1, module version = 2.10.5
[ 874.241] Module class: X.Org XInput Driver
[ 874.241] ABI class: X.Org XInput driver, version 24.1
[ 874.241] (II) Using input driver 'evdev' for 'Power Button'
[ 874.242] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 36 paused 0
[ 874.242] (**) Power Button: always reports core events
[ 874.242] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 874.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 874.242] (--) evdev: Power Button: Found keys
[ 874.242] (II) evdev: Power Button: Configuring as keyboard
[ 874.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 874.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 874.242] (**) Option "xkb_rules" "evdev"
[ 874.242] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 874.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 874.242] (II) Using input driver 'evdev' for 'Power Button'
[ 874.243] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 37 paused 0
[ 874.243] (**) Power Button: always reports core events
[ 874.243] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 874.243] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 874.243] (--) evdev: Power Button: Found keys
[ 874.243] (II) evdev: Power Button: Configuring as keyboard
[ 874.243] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 874.243] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 874.243] (**) Option "xkb_rules" "evdev"
[ 874.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 874.244] (II) No input driver specified, ignoring this device.
[ 874.244] (II) This device may have been added with another device file.
[ 874.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 874.244] (II) No input driver specified, ignoring this device.
[ 874.244] (II) This device may have been added with another device file.
[ 874.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 874.244] (II) No input driver specified, ignoring this device.
[ 874.244] (II) This device may have been added with another device file.
[ 874.245] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 874.245] (II) No input driver specified, ignoring this device.
[ 874.245] (II) This device may have been added with another device file.
[ 874.245] (II) config/udev: Adding input device Burr-Brown from TI USB Audio CODEC (/dev/input/event2)
[ 874.245] (**) Burr-Brown from TI USB Audio CODEC : Applying InputClass "evdev keyboard catchall"
[ 874.245] (II) Using input driver 'evdev' for 'Burr-Brown from TI USB Audio CODEC '
[ 874.246] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 38 paused 0
[ 874.246] (**) Burr-Brown from TI USB Audio CODEC : always reports core events
[ 874.246] (**) evdev: Burr-Brown from TI USB Audio CODEC : Device: "/dev/input/event2"
[ 874.246] (--) evdev: Burr-Brown from TI USB Audio CODEC : Vendor 0x8bb Product 0x2902
[ 874.246] (--) evdev: Burr-Brown from TI USB Audio CODEC : Found keys
[ 874.246] (II) evdev: Burr-Brown from TI USB Audio CODEC : Configuring as keyboard
[ 874.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.3/0003:08BB:2902.0001/input/input2/event2"
[ 874.246] (II) XINPUT: Adding extended input device "Burr-Brown from TI USB Audio CODEC " (type: KEYBOARD, id 8)
[ 874.246] (**) Option "xkb_rules" "evdev"
[ 874.247] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)
[ 874.247] (II) No input driver specified, ignoring this device.
[ 874.247] (II) This device may have been added with another device file.
[ 874.247] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 874.247] (II) No input driver specified, ignoring this device.
[ 874.247] (II) This device may have been added with another device file.
[ 874.247] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event12)
[ 874.247] (II) No input driver specified, ignoring this device.
[ 874.247] (II) This device may have been added with another device file.
[ 874.248] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event13)
[ 874.248] (II) No input driver specified, ignoring this device.
[ 874.248] (II) This device may have been added with another device file.
[ 874.248] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event14)
[ 874.248] (II) No input driver specified, ignoring this device.
[ 874.248] (II) This device may have been added with another device file.
[ 874.248] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[ 874.248] (II) No input driver specified, ignoring this device.
[ 874.248] (II) This device may have been added with another device file.
[ 874.248] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 874.248] (II) No input driver specified, ignoring this device.
[ 874.248] (II) This device may have been added with another device file.
[ 874.249] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 874.249] (II) No input driver specified, ignoring this device.
[ 874.249] (II) This device may have been added with another device file.
[ 874.249] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 874.249] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 874.249] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 874.250] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[ 874.250] (**) Logitech USB Keyboard: always reports core events
[ 874.250] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event3"
[ 874.251] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 874.251] (--) evdev: Logitech USB Keyboard: Found keys
[ 874.251] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 874.251] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1.1/9-1.1:1.0/0003:046D:C31C.0002/input/input3/event3"
[ 874.251] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 874.251] (**) Option "xkb_rules" "evdev"
[ 874.251] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 874.251] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 874.251] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 874.252] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 40 paused 0
[ 874.252] (**) Logitech USB Keyboard: always reports core events
[ 874.253] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event4"
[ 874.253] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 874.253] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 874.253] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 874.253] (--) evdev: Logitech USB Keyboard: Found keys
[ 874.253] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 874.253] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 874.253] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 874.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1.1/9-1.1:1.1/0003:046D:C31C.0003/input/input4/event4"
[ 874.253] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 874.253] (**) Option "xkb_rules" "evdev"
[ 874.253] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 874.253] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 874.253] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 874.253] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 874.253] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 874.253] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 874.254] (**) Logitech USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 874.254] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 874.306] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 41 paused 0
[ 874.306] (**) Logitech USB Keyboard: always reports core events
[ 874.306] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event5"
[ 874.306] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 874.306] (--) evdev: Logitech USB Keyboard: Found 9 mouse buttons
[ 874.306] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 874.306] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 874.306] (--) evdev: Logitech USB Keyboard: Found x and y relative axes
[ 874.306] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 874.306] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 874.306] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 874.306] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 874.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1.1/9-1.1:1.2/0003:046D:C31C.0004/input/input5/event5"
[ 874.306] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: MOUSE, id 11)
[ 874.306] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 874.306] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 874.306] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 874.306] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 874.306] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 874.307] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/mouse0)
[ 874.307] (II) No input driver specified, ignoring this device.
[ 874.307] (II) This device may have been added with another device file.
[ 874.307] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 874.307] (II) No input driver specified, ignoring this device.
[ 874.307] (II) This device may have been added with another device file.
[ 874.327] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 874.506] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 1958.222] (II) config/udev: removing device Burr-Brown from TI USB Audio CODEC
[ 1958.223] (II) evdev: Burr-Brown from TI USB Audio CODEC : Close
[ 1958.223] (II) UnloadModule: "evdev"
[ 1958.223] (II) systemd-logind: releasing fd for 13:66
[ 1964.300] (II) config/udev: Adding input device Burr-Brown from TI USB Audio CODEC (/dev/input/event2)
[ 1964.300] (**) Burr-Brown from TI USB Audio CODEC : Applying InputClass "evdev keyboard catchall"
[ 1964.300] (II) Using input driver 'evdev' for 'Burr-Brown from TI USB Audio CODEC '
[ 1964.316] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 45 paused 0
[ 1964.316] (**) Burr-Brown from TI USB Audio CODEC : always reports core events
[ 1964.316] (**) evdev: Burr-Brown from TI USB Audio CODEC : Device: "/dev/input/event2"
[ 1964.316] (--) evdev: Burr-Brown from TI USB Audio CODEC : Vendor 0x8bb Product 0x2902
[ 1964.316] (--) evdev: Burr-Brown from TI USB Audio CODEC : Found keys
[ 1964.316] (II) evdev: Burr-Brown from TI USB Audio CODEC : Configuring as keyboard
[ 1964.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb10/10-2/10-2:1.3/0003:08BB:2902.0005/input/input19/event2"
[ 1964.316] (II) XINPUT: Adding extended input device "Burr-Brown from TI USB Audio CODEC " (type: KEYBOARD, id 8)
[ 1964.316] (**) Option "xkb_rules" "evdev"Offline
#17 2018-04-01 07:22:13
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
Now caught by evdev (what is ok, but) libinput broken?
stat /usr/share/X11/xorg.conf.d/40-libinput.conf
pacman -Qkk xf86-input-libinputOffline
#18 2018-04-01 19:09:52
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
Ah, as I feared, things are working but sounds like maybe not working the way they are supposed to. The results:
$ stat /usr/share/X11/xorg.conf.d/40-libinput.conf
stat: cannot stat '/usr/share/X11/xorg.conf.d/40-libinput.conf': No such file or directory
$ pacman -Qkk xf86-input-libinput
warning: xf86-input-libinput: /usr/share/X11/xorg.conf.d/40-libinput.conf (No such file or directory)
xf86-input-libinput: 21 total files, 1 altered fileOffline
#19 2018-04-01 19:11:24
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
btw, just now noticed, I have 40-libinput.conf in the backup I made of the entire xorg.conf.d directory, in my linux user's home directory.
What might be the cleanest way to put things back in order?
Offline
#20 2018-04-01 19:24:10
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
"pacman -S xf86-input-libinput"
Offline
#21 2018-04-01 19:33:47
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
OK, that brought 40-libinput.conf back, and libinput now shows 0 altered files. Does this mean I should unintstall some of that xf86-input- stuff I had installed?? Which had at least made my system functional again?
$ sudo pacman -S xf86-input-libinput
warning: xf86-input-libinput-0.27.0-2 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) xf86-input-libinput-0.27.0-2
Total Installed Size: 0.08 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [##############################################] 100%
(1/1) checking package integrity [##############################################] 100%
(1/1) loading package files [##############################################] 100%
(1/1) checking for file conflicts [##############################################] 100%
(1/1) checking available disk space [##############################################] 100%
warning: could not get file information for usr/share/X11/xorg.conf.d/40-libinput.conf
:: Processing package changes...
(1/1) reinstalling xf86-input-libinput [##############################################] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
12:30 PM:fugbert@arch-desktop:~:
$ stat /usr/share/X11/xorg.conf.d/40-libinput.conf
File: /usr/share/X11/xorg.conf.d/40-libinput.conf
Size: 945 Blocks: 8 IO Block: 4096 regular file
Device: 821h/2081d Inode: 5131305 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2018-04-01 12:30:00.000000000 -0700
Modify: 2018-03-21 16:57:37.000000000 -0700
Change: 2018-04-01 12:30:00.688920784 -0700
Birth: -
12:30 PM:fugbert@arch-desktop:~:
$ pacman -Qkk xf86-input-libinput
xf86-input-libinput: 21 total files, 0 altered filesOffline
#22 2018-04-01 20:31:38
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,849
Re: [SOLVED] arch X awesome wm problem
You can for sure remove xf86-input-keyboard and xf86-input-mouse (those are legacy drivers w/o real usage these days) and since the error was because libinput didn't take over at all, removing evdev should be ok as well.
Since we're in the transition between evdev and libinput, the latter might have problems/lack features of evdev and in that case you may choose to remain with evdev for the time being.
But again: the known problem was the missing libinput config, whether there's a remaining problem is unlikely but unknown yet (would be shadowed by the missing config)
Offline
#23 2018-04-01 20:57:55
- chrisco23
- Member
- Registered: 2017-12-13
- Posts: 156
Re: [SOLVED] arch X awesome wm problem
I removed all those xf86-input things, including evdev because I know I'll forget that down the line. Everything seems to be working no, at least so far so good.
Thanks again for all the help, and patience! This one was a lifesaver.
I'll mark solved.
Offline
Pages: 1