You are not logged in.

Pages: 1

#1 2018-04-14 02:27:13

jbenge1
Member
From: Az
Registered: 2018-04-09
Posts: 151

[SOLVED]No input outpu audio devices found

I recently installed arch on my laptop (migrating from Ubuntu) and after the install I had everything working fine except the microphone. After tinkering around a bit trying to get the microphone to work I now can no longer use the shortcut keys to increase/decrease/mute the volume nor have I gotten the microphone to work, nor can I start pulseaudio.... In my audio settings (using kde plasma 5) it tells me no input or output devices found.

Output of pulseaudio -v

    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 11.1
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 749ce45728184f729f7463a3e4fc3009.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/justin/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-11.1/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: System supports high resolution timers
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/justin/.config/pulse/749ce45728184f729f7463a3e4fc3009-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/justin/.config/pulse/749ce45728184f729f7463a3e4fc3009-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/justin/.config/pulse/749ce45728184f729f7463a3e4fc3009-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-alsa-soure.so: module-alsa-soure.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-alsa-soure".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.

For the microphone, the output of arecord -l is...

    **** List of CAPTURE Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: Generic Analog [Generic Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0



EDIT: I can increase and decrease the volume using alsamixer from the command line

Last edited by jbenge1 (2018-04-14 21:15:31)

"Dr. Madden, why don't the natural numbers include 0?" -me
"....... Take a philosophy course" -Dr. Madden

Offline

#2 2018-04-14 09:41:52

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]No input outpu audio devices found

How up to date is your system? What's the output of 

pacman -Qs alsa

All versions of alsa-{utils,lib,plugins} should be on 1.1.6 by now. Also elaborate on "tinkering around a bit" did you change any config files? asoundrc, /etc/asound.conf /etc/pulse/default.pa  or similar?

And please use [ code ] tags for pasting command output.

Offline

#3 2018-04-14 17:45:15

jbenge1
Member
From: Az
Registered: 2018-04-09
Posts: 151

Re: [SOLVED]No input outpu audio devices found

the output of 

pacman -Qs alsa

    local/alsa-lib 1.1.5-1
        An alternative implementation of Linux sound support
    local/alsa-utils 1.1.6-1
        An alternative implementation of Linux sound support
    local/zita-alsa-pcmi 0.2.0-3
        The successor of clalsadrv, provides easy access to ALSA PCM devices.

Edit -- That was my bad!

Last edited by jbenge1 (2018-04-14 18:45:44)

"Dr. Madden, why don't the natural numbers include 0?" -me
"....... Take a philosophy course" -Dr. Madden

Offline

#4 2018-04-14 17:51:44

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [SOLVED]No input outpu audio devices found

Again, please use [code⁣] [/code⁣] tags when posting to the forums. There is a BBCode link below every reply box for your reference.
CoC - Posting pictures and code

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#5 2018-04-14 18:52:29

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]No input outpu audio devices found

https://wiki.archlinux.org/index.php/Sy … nsupported

Update your system.

Offline

#6 2018-04-14 19:18:09

jbenge1
Member
From: Az
Registered: 2018-04-09
Posts: 151

Re: [SOLVED]No input outpu audio devices found

After updating I still get the same error when tryihng to start pulseaudio and still no input/output devices found

"Dr. Madden, why don't the natural numbers include 0?" -me
"....... Take a philosophy course" -Dr. Madden

Offline

#7 2018-04-14 19:41:25

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]No input outpu audio devices found

What adjustments did you do? Post 

pacman -Qkk pulseaudio
dmesg

as well as a pacman.log

Offline

#8 2018-04-14 20:24:14

jbenge1
Member
From: Az
Registered: 2018-04-09
Posts: 151

Re: [SOLVED]No input outpu audio devices found

pacman -Qkk pulseaudio
backup file: pulseaudio: /etc/pulse/default.pa (Modification time mismatch)
backup file: pulseaudio: /etc/pulse/default.pa (Size mismatch)
pulseaudio: 325 total files, 0 altered files




dmesg
[    0.000000] Linux version 4.14.34-1-lts (builduser@andyrtr) (gcc version 7.3.1 20180312 (GCC)) #1 SMP Thu Apr 12 20:30:09 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=e3304ca4-df5d-4c77-9474-8672db096338 rw quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000093bddfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000093bde000-0x0000000093bdefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000093bdf000-0x0000000093bdffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000093be0000-0x0000000099b29fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099b2a000-0x000000009a9a5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009a9a6000-0x000000009a9e9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009a9ea000-0x000000009ae03fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009ae04000-0x000000009b37efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b37f000-0x000000009b3fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b3ff000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X510UA/X510UA, BIOS X510UA.304 09/25/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 009B800000 mask 7FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x9b3ff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc30-0x000fcc3f] mapped at [ffffffffff200c30]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8b5b80096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x109636000, 0x109636fff] PGTABLE
[    0.000000] BRK [0x109637000, 0x109637fff] PGTABLE
[    0.000000] BRK [0x109638000, 0x109638fff] PGTABLE
[    0.000000] BRK [0x109639000, 0x109639fff] PGTABLE
[    0.000000] BRK [0x10963a000, 0x10963afff] PGTABLE
[    0.000000] BRK [0x10963b000, 0x10963bfff] PGTABLE
[    0.000000] BRK [0x10963c000, 0x10963cfff] PGTABLE
[    0.000000] BRK [0x10963d000, 0x10963dfff] PGTABLE
[    0.000000] BRK [0x10963e000, 0x10963efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3722f000-0x3790efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x000000009A9B30A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009A9DE318 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000009A9B3210 02B102 (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000009ADD2F00 000040
[    0.000000] ACPI: APIC 0x000000009A9DE430 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000009A9DE4B8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000009A9DE500 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x000000009A9DE5A0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x000000009A9DE668 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000009A9DE6A8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009A9DEA08 006079 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: MSDM 0x000000009A9E4A88 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: SSDT 0x000000009A9E4AE0 003176 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000009A9E7C58 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.000000] ACPI: UEFI 0x000000009A9E7C90 000042 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000009A9E7CD8 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000009A9E8BB8 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000009A9E8C50 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009A9E8D98 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009A9E9038 00050D (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000009A9E9548 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000009A9E9580 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DMAR 0x000000009A9E95D8 000138 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: TPM2 0x000000009A9E9710 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: WSMT 0x000000009A9E9748 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25effc000-0x25effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000093bddfff]
[    0.000000]   node   0: [mem 0x0000000093be0000-0x0000000099b29fff]
[    0.000000]   node   0: [mem 0x000000009b37f000-0x000000009b3fefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2067267
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9775 pages used for memmap
[    0.000000]   DMA32 zone: 625576 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009c000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x93bde000-0x93bdefff]
[    0.000000] PM: Registered nosave memory: [mem 0x93bdf000-0x93bdffff]
[    0.000000] PM: Registered nosave memory: [mem 0x99b2a000-0x9a9a5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9a9a6000-0x9a9e9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9a9ea000-0x9ae03fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ae04000-0x9b37efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b3ff000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff8b5ddec00000 s132440 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s132440 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2034943
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=e3304ca4-df5d-4c77-9474-8672db096338 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8041344K/8269068K available (10252K kernel code, 1150K rwdata, 2788K rodata, 1420K init, 992K bss, 227724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29109 entries in 114 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.010000] tsc: Detected 2900.000 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=29040000)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.010000] ACPI: Core revision 20170728
[    0.044181] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.044203] Security Framework initialized
[    0.044203] Yama: becoming mindful.
[    0.045397] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.046031] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.046054] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.046073] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.046240] CPU: Physical Processor ID: 0
[    0.046241] CPU: Processor Core ID: 0
[    0.046245] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.046246] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.046250] mce: CPU supports 8 MCE banks
[    0.046258] CPU0: Thermal monitoring enabled (TM1)
[    0.046271] process: using mwait in idle threads
[    0.046273] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.046274] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.046275] Spectre V2 : Mitigation: Full generic retpoline
[    0.046275] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.046476] Freeing SMP alternatives memory: 24K
[    0.048215] smpboot: Max logical packages: 2
[    0.048218] DMAR: Host address width 39
[    0.048219] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.048227] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.048228] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.048231] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.048232] DMAR: RMRR base: 0x0000009a136000 end: 0x0000009a155fff
[    0.048233] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[    0.048234] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.048235] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.048235] DMAR: ANDD device: 7 name: \_SB.PCI0.SPI0
[    0.048236] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[    0.048237] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.048238] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.048239] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.049676] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.049677] x2apic enabled
[    0.049687] Switched APIC routing to cluster x2apic.
[    0.053705] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.153757] TSC deadline timer enabled
[    0.153762] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.153811] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.153839] ... version:                4
[    0.153839] ... bit width:              48
[    0.153840] ... generic registers:      4
[    0.153840] ... value mask:             0000ffffffffffff
[    0.153841] ... max period:             00007fffffffffff
[    0.153841] ... fixed-purpose events:   3
[    0.153842] ... event mask:             000000070000000f
[    0.153876] Hierarchical SRCU implementation.
[    0.154451] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.154462] smp: Bringing up secondary CPUs ...
[    0.154514] x86: Booting SMP configuration:
[    0.154515] .... node  #0, CPUs:      #1 #2 #3
[    0.154964] smp: Brought up 1 node, 4 CPUs
[    0.154964] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
[    0.154964] devtmpfs: initialized
[    0.154964] x86/mm: Memory block size: 128MB
[    0.154964] PM: Registering ACPI NVS region [mem 0x93bde000-0x93bdefff] (4096 bytes)
[    0.154964] PM: Registering ACPI NVS region [mem 0x9a9ea000-0x9ae03fff] (4300800 bytes)
[    0.154964] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.154964] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.154964] pinctrl core: initialized pinctrl subsystem
[    0.154964] RTC time: 19:09:49, date: 04/14/18
[    0.154964] NET: Registered protocol family 16
[    0.154964] cpuidle: using governor ladder
[    0.154964] cpuidle: using governor menu
[    0.154964] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.154964] ACPI: bus type PCI registered
[    0.154964] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154964] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.154964] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.154964] PCI: Using configuration type 1 for base access
[    0.154964] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.154964] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.154964] ACPI: Added _OSI(Module Device)
[    0.154964] ACPI: Added _OSI(Processor Device)
[    0.154964] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.154964] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154964] ACPI: EC: EC started
[    0.154964] ACPI: EC: interrupt blocked
[    0.160010] ACPI: \: Used as first EC
[    0.160010] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.160010] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.160190] ACPI: Executed 31 blocks of module-level executable AML code
[    0.176465] ACPI: Dynamic OEM Table Load:
[    0.176465] ACPI: SSDT 0xFFFF8B5DD4ECB800 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.176465] ACPI: Executed 1 blocks of module-level executable AML code
[    0.176465] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.176465] ACPI: Dynamic OEM Table Load:
[    0.176465] ACPI: SSDT 0xFFFF8B5DD48A2400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.176465] ACPI: Executed 1 blocks of module-level executable AML code
[    0.176465] ACPI: Dynamic OEM Table Load:
[    0.176465] ACPI: SSDT 0xFFFF8B5DD48E2200 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.176465] ACPI: Executed 1 blocks of module-level executable AML code
[    0.176465] ACPI: Dynamic OEM Table Load:
[    0.176465] ACPI: SSDT 0xFFFF8B5DD48E3000 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.176465] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180194] ACPI: Dynamic OEM Table Load:
[    0.180200] ACPI: SSDT 0xFFFF8B5DD4E53000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.180598] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180605] ACPI: Dynamic OEM Table Load:
[    0.180605] ACPI: SSDT 0xFFFF8B5DD481F800 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.180605] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180605] ACPI: Dynamic OEM Table Load:
[    0.180605] ACPI: SSDT 0xFFFF8B5DD48E3A00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.180605] ACPI: Executed 1 blocks of module-level executable AML code
[    0.181439] ACPI: Interpreter enabled
[    0.181480] ACPI: (supports S0 S3 S4 S5)
[    0.181481] ACPI: Using IOAPIC for interrupt routing
[    0.181515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.182360] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.186049] ACPI: Power Resource [WRST] (on)
[    0.190033] ACPI: Power Resource [WRST] (on)
[    0.190171] ACPI: Power Resource [WRST] (on)
[    0.190305] ACPI: Power Resource [WRST] (on)
[    0.190444] ACPI: Power Resource [WRST] (on)
[    0.190764] ACPI: Power Resource [WRST] (on)
[    0.190901] ACPI: Power Resource [WRST] (on)
[    0.191037] ACPI: Power Resource [WRST] (on)
[    0.204005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.204009] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.205576] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.205577] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.206303] PCI host bridge to bus 0000:00
[    0.206305] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.206306] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.206308] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.206309] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[    0.206310] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.206311] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.206321] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.206642] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.206652] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[    0.206658] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.206662] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.206793] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.206805] pci 0000:00:04.0: reg 0x10: [mem 0xef120000-0xef127fff 64bit]
[    0.207008] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.207031] pci 0000:00:14.0: reg 0x10: [mem 0xef110000-0xef11ffff 64bit]
[    0.207100] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.207291] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.207313] pci 0000:00:14.2: reg 0x10: [mem 0xef13a000-0xef13afff 64bit]
[    0.207570] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.207834] pci 0000:00:15.0: reg 0x10: [mem 0xef139000-0xef139fff 64bit]
[    0.208796] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.209059] pci 0000:00:15.1: reg 0x10: [mem 0xef138000-0xef138fff 64bit]
[    0.209957] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.209984] pci 0000:00:16.0: reg 0x10: [mem 0xef137000-0xef137fff 64bit]
[    0.210064] pci 0000:00:16.0: PME# supported from D3hot
[    0.210243] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.210262] pci 0000:00:17.0: reg 0x10: [mem 0xef130000-0xef131fff]
[    0.210270] pci 0000:00:17.0: reg 0x14: [mem 0xef136000-0xef1360ff]
[    0.210278] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.210286] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.210294] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.210302] pci 0000:00:17.0: reg 0x24: [mem 0xef135000-0xef1357ff]
[    0.210344] pci 0000:00:17.0: PME# supported from D3hot
[    0.210487] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.210567] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.210729] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.210807] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.211061] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
[    0.211325] pci 0000:00:1e.0: reg 0x10: [mem 0xef134000-0xef134fff 64bit]
[    0.212296] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000
[    0.212559] pci 0000:00:1e.2: reg 0x10: [mem 0xef133000-0xef133fff 64bit]
[    0.213455] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.213689] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.213706] pci 0000:00:1f.2: reg 0x10: [mem 0xef12c000-0xef12ffff]
[    0.213884] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.213913] pci 0000:00:1f.3: reg 0x10: [mem 0xef128000-0xef12bfff 64bit]
[    0.213947] pci 0000:00:1f.3: reg 0x20: [mem 0xef100000-0xef10ffff 64bit]
[    0.213999] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.214223] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.214284] pci 0000:00:1f.4: reg 0x10: [mem 0xef132000-0xef1320ff 64bit]
[    0.214355] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.214599] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.214985] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.215085] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
[    0.215368] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.240602] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.240606] pci 0000:00:1c.5:   bridge window [mem 0xef000000-0xef0fffff]
[    0.242752] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.242811] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.242867] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.242924] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.242980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.243037] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.243093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.243149] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.243693] ACPI: EC: interrupt unblocked
[    0.243712] ACPI: EC: event unblocked
[    0.243725] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.243727] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.243795] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.243795] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.243795] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.243795] vgaarb: loaded
[    0.243795] EDAC MC: Ver: 3.0.0
[    0.243795] PCI: Using ACPI for IRQ routing
[    0.258048] PCI: pci_cache_line_size set to 64 bytes
[    0.258712] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.258713] e820: reserve RAM buffer [mem 0x93bde000-0x93ffffff]
[    0.258714] e820: reserve RAM buffer [mem 0x99b2a000-0x9bffffff]
[    0.258715] e820: reserve RAM buffer [mem 0x9b3ff000-0x9bffffff]
[    0.258716] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.258778] NetLabel: Initializing
[    0.258778] NetLabel:  domain hash size = 128
[    0.258779] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.258791] NetLabel:  unlabeled traffic allowed by default
[    0.260068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.260073] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.260073] clocksource: Switched to clocksource hpet
[    0.267117] VFS: Disk quotas dquot_6.6.0
[    0.267131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.267170] pnp: PnP ACPI init
[    0.267383] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.267384] system 00:00: [io  0xffff] has been reserved
[    0.267386] system 00:00: [io  0xffff] has been reserved
[    0.267387] system 00:00: [io  0xffff] has been reserved
[    0.267388] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.267390] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.267394] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267485] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.267512] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.267515] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.267649] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.267835] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.267836] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.267837] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.267839] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.267840] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.267842] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.267843] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.267844] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.267846] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.267847] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.267850] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267880] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.267881] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.267883] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.267884] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.267885] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.267887] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.267888] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.267891] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268169] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.268172] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269254] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.269255] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.269257] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.269258] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.269259] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.269262] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270290] pnp: PnP ACPI: found 8 devices
[    0.277950] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.277968] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.277970] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.277972] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.277989] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff]
[    0.277993] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0200000-0xa03fffff 64bit pref]
[    0.277995] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.277997] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.278006] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.278010] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xa01fffff]
[    0.278013] pci 0000:00:1c.0:   bridge window [mem 0xa0200000-0xa03fffff 64bit pref]
[    0.278018] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.278023] pci 0000:00:1c.5:   bridge window [mem 0xef000000-0xef0fffff]
[    0.278030] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.278031] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.278032] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.278034] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[    0.278035] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.278036] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.278037] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa01fffff]
[    0.278038] pci_bus 0000:01: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref]
[    0.278040] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
[    0.278166] NET: Registered protocol family 2
[    0.278275] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.278396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.278549] TCP: Hash tables configured (established 65536 bind 65536)
[    0.278572] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.278596] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.278640] NET: Registered protocol family 1
[    0.278652] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.279210] PCI: CLS 64 bytes, default 64
[    0.279236] Unpacking initramfs...
[    0.381929] Freeing initrd memory: 7040K
[    0.381961] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[    0.381964] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[    0.381966] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:1e.2
[    0.381968] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:1e.0
[    0.381981] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.381983] software IO TLB [mem 0x95b2a000-0x99b2a000] (64MB) mapped at [ffff8b5c15b2a000-ffff8b5c19b29fff]
[    0.382137] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    0.382258] Scanning for low memory corruption every 60 seconds
[    0.382760] Initialise system trusted keyrings
[    0.382769] Key type blacklist registered
[    0.382847] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.383590] zbud: loaded
[    0.386062] Key type asymmetric registered
[    0.386091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.386153] io scheduler noop registered
[    0.386154] io scheduler deadline registered (default)
[    0.386183] io scheduler cfq registered
[    0.386184] io scheduler mq-deadline registered
[    0.386184] io scheduler kyber registered
[    0.386200] io scheduler bfq registered
[    0.386785] pcieport 0000:00:1c.5: AER enabled with IRQ 123
[    0.386809] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.386828] pcieport 0000:00:1c.5: Signaling PME with IRQ 123
[    0.386847] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.386884] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.386884] vesafb: scrolling: redraw
[    0.386885] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.386894] vesafb: framebuffer at 0xd0000000, mapped to 0xffffa21701800000, using 8128k, total 8128k
[    0.560306] Console: switching to colour frame buffer device 240x67
[    0.733000] fb0: VESA VGA frame buffer device
[    0.733018] intel_idle: MWAIT substates: 0x11142120
[    0.733019] intel_idle: v0.4.1 model 0x8E
[    0.733201] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.733806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.734634] rtc_cmos 00:01: RTC can wake from S4
[    0.735041] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.735126] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.735133] intel_pstate: Intel P-state driver initializing
[    0.735654] intel_pstate: HWP enabled
[    0.735718] ledtrig-cpu: registered to indicate activity on CPUs
[    0.735758] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.735919] NET: Registered protocol family 10
[    0.739099] Segment Routing with IPv6
[    0.739113] NET: Registered protocol family 17
[    0.739373] RAS: Correctable Errors collector initialized.
[    0.739389] microcode: sig=0x806e9, pf=0x80, revision=0x62
[    0.739488] microcode: Microcode Update Driver: v2.2.
[    0.739494] sched_clock: Marking stable (739485269, 0)->(735903257, 3582012)
[    0.739802] registered taskstats version 1
[    0.739807] Loading compiled-in X.509 certificates
[    0.739817] zswap: loaded using pool lzo/zbud
[    0.741744] Key type big_key registered
[    0.743024]   Magic number: 14:670:192
[    0.743058] acpi device:1e: hash matches
[    0.743204] rtc_cmos 00:01: setting system clock to 2018-04-14 19:09:50 UTC (1523732990)
[    0.744527] Freeing unused kernel memory: 1420K
[    0.744527] Write protecting the kernel read-only data: 16384k
[    0.744935] Freeing unused kernel memory: 2016K
[    0.746676] Freeing unused kernel memory: 1308K
[    0.795032] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    0.795033] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.797682] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.809887] ACPI: bus type USB registered
[    0.809905] usbcore: registered new interface driver usbfs
[    0.809912] usbcore: registered new interface driver hub
[    0.809926] usbcore: registered new device driver usb
[    0.811410] SCSI subsystem initialized
[    0.814459] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.814464] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.815639] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.815644] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.816058] hub 1-0:1.0: USB hub found
[    0.816085] hub 1-0:1.0: 12 ports detected
[    0.816810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.816812] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.816953] hub 2-0:1.0: USB hub found
[    0.816981] hub 2-0:1.0: 6 ports detected
[    0.817075] usb: port power management may be unreliable
[    0.817449] libata version 3.00 loaded.
[    0.818374] ahci 0000:00:17.0: version 3.0
[    0.818557] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.818559] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.818773] scsi host0: ahci
[    0.818857] scsi host1: ahci
[    0.818896] ata1: SATA max UDMA/133 abar m2048@0xef135000 port 0xef135100 irq 125
[    0.818898] ata2: SATA max UDMA/133 abar m2048@0xef135000 port 0xef135180 irq 125
[    0.869799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.141981] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.153522] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.154604] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.154609] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.154613] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.154744] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.154748] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.154752] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.155166] ata2.00: ATA-10: TOSHIBA THNSNK128GVN8, K8AS4102, max UDMA/100
[    1.155169] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.156813] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.156818] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.156822] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.157245] ata2.00: configured for UDMA/100
[    1.180104] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    1.282407] ata1.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
[    1.282412] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.307462] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.307468] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.307472] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.345477] ata1.00: configured for UDMA/133
[    1.345832] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
[    1.346697] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA THNSNK12 4102 PQ: 0 ANSI: 5
[    1.352747] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.352753] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.352799] sd 0:0:0:0: [sda] Write Protect is off
[    1.352805] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.352826] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.352830] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.352865] sd 1:0:0:0: [sdb] Write Protect is off
[    1.352869] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.352906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.352937] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.353724]  sdb: sdb1 sdb2 sdb3
[    1.354201] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.375079] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.390172] clocksource: Switched to clocksource tsc
[    1.540081] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[    1.603904] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    1.696903] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.704477] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.730792] systemd[1]: Detected architecture x86-64.
[    1.736551] systemd[1]: Set hostname to <zenbook-justin>.
[    1.824771] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.824853] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.824863] systemd[1]: Reached target Login Prompts.
[    1.828272] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.828316] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.828325] systemd[1]: Reached target Remote File Systems.
[    1.829553] systemd[1]: Listening on Process Core Dump Socket.
[    1.854730] EXT4-fs (sdb1): re-mounted. Opts: discard,data=ordered
[    1.874514] systemd-journald[184]: Received request to flush runtime journal from PID 1
[    2.037361] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input1
[    2.038358] ACPI: Lid Switch [LID]
[    2.038425] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.038432] ACPI: Sleep Button [SLPB]
[    2.038464] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    2.038469] ACPI: Power Button [PWRB]
[    2.038502] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.038564] ACPI: Power Button [PWRF]
[    2.043271] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[    2.056390] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80                                                    
[    2.057790] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80                                                    
[    2.063176] ACPI: AC Adapter [AC0] (on-line)
[    2.070467] ACPI: Battery Slot [BAT0] (battery present)
[    2.133873] Adding 10485756k swap on /dev/sdb2.  Priority:-2 extents:1 across:10485756k SSFS
[    2.142598] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.146179] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.146541] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.146633] thermal LNXTHERM:00: registered as thermal_zone2
[    2.146634] ACPI: Thermal Zone [THRM] (43 C)
[    2.201692] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[    2.240261] hidraw: raw HID events driver (C) Jiri Kosina
[    2.248212] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.252095] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.252342] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.258441] Linux agpgart interface v0.103
[    2.260387] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.276351] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.276378] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.278250] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.278910] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.283067] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    2.283355] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    2.283694] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[    2.283921] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    2.308276] ahci 0000:00:17.0: port does not support device sleep
[    2.319397] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.319398] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.319399] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.319399] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.319400] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.319400] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.346300] AVX2 version of gcm_enc/dec engaged.
[    2.346302] AES CTR mode by8 optimization enabled
[    2.362841] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[    2.393342] random: crng init done
[    2.433739] asus_wmi: ASUS WMI generic driver loaded
[    2.436194] asus_wmi: Initialization: 0x1
[    2.436232] asus_wmi: BIOS WMI version: 9.0
[    2.436257] asus_wmi: SFUN value: 0x21
[    2.437051] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
[    2.437364] asus_wmi: Number of fans: 0
[    2.478118] Intel(R) Wireless WiFi driver for Linux
[    2.478119] Copyright(c) 2003- 2015 Intel Corporation
[    2.481339] [drm] Memory usable by graphics device = 4096M
[    2.481342] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    2.481343] fb: switching to inteldrmfb from VESA VGA
[    2.481360] Console: switching to colour dummy device 80x25
[    2.481844] [drm] Replacing VGA console driver
[    2.487320] iwlwifi 0000:02:00.0: loaded firmware version 34.0.1 op_mode iwlmvm
[    2.487393] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.487394] [drm] Driver supports precise vblank timestamp query.
[    2.489492] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.492221] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    2.510540] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    2.515316] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.515472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.524109] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.526769] iTCO_vendor_support: vendor-support=0
[    2.527739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.527893] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.529141] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.538793] fbcon: inteldrmfb (fb0) is primary device
[    2.538972] hid-multitouch 0018:04F3:3057.0001: Ignoring the extra HID_DG_INPUTMODE
[    2.539544] input: ELAN1300:00 04F3:3057 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3057.0001/input/input10
[    2.539669] hid-multitouch 0018:04F3:3057.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3057] on i2c-ELAN1300:00
[    2.569637] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    2.578246] mousedev: PS/2 mouse device common for all mice
[    2.601366] intel_rapl: Found RAPL domain package
[    2.601367] intel_rapl: Found RAPL domain core
[    2.601368] intel_rapl: Found RAPL domain uncore
[    2.601369] intel_rapl: Found RAPL domain dram
[    2.629698] iwlwifi 0000:02:00.0: base HW address: 90:61:ae:e8:2b:32
[    2.670220] dw-apb-uart.2: ttyS0 at MMIO 0xef134000 (irq = 20, base_baud = 115200) is a 16550A
[    2.712144] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.712347] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.712360] thermal thermal_zone5: failed to read out thermal zone (-61)
[    2.713882] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.017198] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    3.676532] Console: switching to colour frame buffer device 240x67
[    3.703898] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.794644] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.794646] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.794647] snd_hda_codec_generic hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    3.794648] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
[    3.794648] snd_hda_codec_generic hdaudioC0D0:    inputs:
[    3.794649] snd_hda_codec_generic hdaudioC0D0:      Internal Mic=0x1a
[    3.794650] snd_hda_codec_generic hdaudioC0D0:      Mic=0x19
[    3.810961] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.811003] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.811042] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.811077] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.811113] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.811147] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.811182] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.090585] [drm] RC6 on
[    5.192946] media: Linux media interface: v0.10
[    5.205541] Linux video capture interface: v2.00
[    5.218753] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a07)
[    5.219485] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    5.219487] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    5.219489] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.219599] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18
[    5.219731] usbcore: registered new interface driver uvcvideo
[    5.219731] USB Video Class driver (1.1.1)
[    6.144978] Bluetooth: Core ver 2.22
[    6.144997] NET: Registered protocol family 31
[    6.144998] Bluetooth: HCI device and connection manager initialized
[    6.145000] Bluetooth: HCI socket layer initialized
[    6.145002] Bluetooth: L2CAP socket layer initialized
[    6.145005] Bluetooth: SCO socket layer initialized
[    6.150147] usbcore: registered new interface driver btusb
[    6.151628] Bluetooth: hci0: Firmware revision 0.1 build 185 week 49 2017
[    7.615972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.615974] Bluetooth: BNEP filters: protocol multicast
[    7.615979] Bluetooth: BNEP socket layer initialized
[   28.920817] Bluetooth: RFCOMM TTY layer initialized
[   28.920821] Bluetooth: RFCOMM socket layer initialized
[   28.920825] Bluetooth: RFCOMM ver 1.11
[  116.838528] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  126.529358] wlp2s0: authenticate with ec:08:6b:f9:a6:86
[  126.541086] wlp2s0: send auth to ec:08:6b:f9:a6:86 (try 1/3)
[  126.553379] wlp2s0: authenticated
[  126.560146] wlp2s0: associate with ec:08:6b:f9:a6:86 (try 1/3)
[  126.566945] wlp2s0: RX AssocResp from ec:08:6b:f9:a6:86 (capab=0x31 status=0 aid=8)
[  126.577512] wlp2s0: associated
[  126.616653] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  126.763525] 8021q: 802.1Q VLAN Support v1.8
[ 3982.581381] acpi INT3400:00: Unsupported event [0x86]
[ 3984.311576] asus_wmi: Unknown key cf pressed
[ 3984.432498] acpi INT3400:00: Unsupported event [0x86]

Also Im not sure how to upload a file and pacman.log looked like it would be a bit long to post...

"Dr. Madden, why don't the natural numbers include 0?" -me
"....... Take a philosophy course" -Dr. Madden

Offline

#9 2018-04-14 20:39:03

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: [SOLVED]No input outpu audio devices found

What did you change in your default.pa, likely you misconfigured something. Post it, or reset it to defaults, and please try to remember stuff you adjust so we don't have to play twenty questions. Any custom asoundrc or asound.conf or similar?

For the log use some pastebin site: https://wiki.archlinux.org/index.php/Li … in_clients

Last edited by V1del (2018-04-14 20:39:46)

Offline

#10 2018-04-14 21:15:11

jbenge1
Member
From: Az
Registered: 2018-04-09
Posts: 151

Re: [SOLVED]No input outpu audio devices found

My mistake, I completely forgot I made edits to this..

"Dr. Madden, why don't the natural numbers include 0?" -me
"....... Take a philosophy course" -Dr. Madden

Offline

Pages: 1

Board footer

Powered by FluxBB