You are not logged in.

Pages: 1

#1 2018-04-15 23:04:01

rockisch
Member
From: Brazil
Registered: 2018-04-15
Posts: 4

[SOLVED] Issues loading ath9k module for my wireless card

So, as the title says, I'm trying to enable a wireless card, more specifically a TL-WN781ND.

I can see it using "lspci -v", and it says that the module name is ath9k. But it seems like arch is struggling to load this module.

Running "dmesg | grep ath9k" is returning:

[     4.751703] ath9k 0000:27:00.0: enabling device (0000 -> 0002)
[     4.760084] ath9k 0000:27:00.0: Failed to initialize device
[     4.760314] ath9k: probe of 0000:27:00.0 failed with error -12

Then, if I try to unload it and load it again:

[   394.138823] ath9k: ath9k: Driver unloaded
[   395.909871] ath9k 0000:27:00.0: Failed to initialize device
[   395.910417] ath9k: probe of 0000:27:00.0 failed with error -12

I found on the internet that maybe this can be fixed downloading "backports", but I'm not sure if this is gonna fix it.

Any ideas on how can I fix this?

(link to ath9k info https://wireless.wiki.kernel.org/en/users/drivers/ath9k )

Last edited by rockisch (2018-04-16 13:15:59)

Offline

#2 2018-04-15 23:10:38

loqs
Member
Registered: 2014-03-06
Posts: 18,859

Re: [SOLVED] Issues loading ath9k module for my wireless card

Please post the full dmesg and output of `lspci -nn`
Edit:
Oh and welcome to the arch linux forums rockisch.

Last edited by loqs (2018-04-15 23:11:19)

Offline

#3 2018-04-15 23:24:05

rockisch
Member
From: Brazil
Registered: 2018-04-15
Posts: 4

Re: [SOLVED] Issues loading ath9k module for my wireless card

loqs wrote:

Please post the full dmesg and output of `lspci -nn`

Sure... I sent only small parts 'cause the whole thing it's kinda big, but here's the lspci -nn:

00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex [1022:1450]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:01.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge [1022:1453]
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:03.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge [1022:1453]
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:07.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:07.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B [1022:1454]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B [1022:1454]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 59)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0 [1022:1460]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1 [1022:1461]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2 [1022:1462]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3 [1022:1463]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4 [1022:1464]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5 [1022:1465]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric Device 18h Function 6 [1022:1466]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7 [1022:1467]
03:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b9] (rev 02)
03:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b5] (rev 02)
03:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b0] (rev 02)
1d:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
1d:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
1d:03.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
1d:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
1d:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
1d:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
25:00.0 USB controller [0c03]: ASMedia Technology Inc. Device [1b21:1343]
26:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
27:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
28:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1)
28:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1)
29:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device [1022:145a]
29:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor [1022:1456]
29:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] USB3 Host Controller [1022:145c]
2a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device [1022:1455]
2a:00.2 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
2a:00.3 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller [1022:1457]

And here's the dmesg

[    0.000000] Linux version 4.15.15-1-ARCH (builduser@heftig-4572) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Sat Mar 31 23:59:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d006433f-68b9-4643-a8f9-140fb67e9e5f rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000001cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000001d00000-0x0000000001ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000002000000-0x00000000da574fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da575000-0x00000000da6fcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da6fd000-0x00000000da718fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da719000-0x00000000da81efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da81f000-0x00000000dabddfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dabde000-0x00000000dbe40fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbe41000-0x00000000dbeaafff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dbeab000-0x00000000ddffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xda6ff000  ACPI=0xda6ff000  SMBIOS=0xdbdb3000  SMBIOS 3.0=0xdbdb2000  ESRT=0xd6c65d18 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0504 02/24/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000DE000000 mask FFFFFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3552M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xde000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000d6c65d18 to 0x00000000d6c65d50.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13a63a000, 0x13a63afff] PGTABLE
[    0.000000] BRK [0x13a63b000, 0x13a63bfff] PGTABLE
[    0.000000] BRK [0x13a63c000, 0x13a63cfff] PGTABLE
[    0.000000] BRK [0x13a63d000, 0x13a63dfff] PGTABLE
[    0.000000] BRK [0x13a63e000, 0x13a63efff] PGTABLE
[    0.000000] BRK [0x13a63f000, 0x13a63ffff] PGTABLE
[    0.000000] BRK [0x13a640000, 0x13a640fff] PGTABLE
[    0.000000] BRK [0x13a641000, 0x13a641fff] PGTABLE
[    0.000000] BRK [0x13a642000, 0x13a642fff] PGTABLE
[    0.000000] BRK [0x13a643000, 0x13a643fff] PGTABLE
[    0.000000] BRK [0x13a644000, 0x13a644fff] PGTABLE
[    0.000000] BRK [0x13a645000, 0x13a645fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37237000-0x37912fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DA6FF000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DA6FF0A0 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DA7084C0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000DA6FF1E8 0092D3 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DABDBC80 000040
[    0.000000] ACPI: APIC 0x00000000DA7085D8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DA7086B8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DA715FD0 001664 (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DA708758 008C4C (v02                 00000002 MSFT 04000000)
[    0.000000] ACPI: FIDT 0x00000000DA7113A8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DA711448 0020E4 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SRAT 0x00000000DA713530 000130 (v03 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DA713660 000F50 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DA7145B0 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DA7145E0 0017A1 (v01 AMD    AOD      00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DA715D88 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000DA715DC8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DA715E00 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DA715E28 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: BGRT 0x00000000DA715E70 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: IVRS 0x00000000DA715EA8 000030 (v02                 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DA715ED8 0000F8 (v01 AMDFCH FCHPT    00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37d000-0x41f37ffff]
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000001cfffff]
[    0.000000]   node   0: [mem 0x0000000002000000-0x00000000da574fff]
[    0.000000]   node   0: [mem 0x00000000da719000-0x00000000da81efff]
[    0.000000]   node   0: [mem 0x00000000dbeab000-0x00000000ddffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4175855
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14036 pages used for memmap
[    0.000000]   DMA32 zone: 898256 pages, LIFO batch:31
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 97 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x01d00000-0x01ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda575000-0xda6fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xda6fd000-0xda718fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda81f000-0xdabddfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdabde000-0xdbe40fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbe41000-0xdbeaafff]
[    0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4110578
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d006433f-68b9-4643-a8f9-140fb67e9e5f rw quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16193012K/16703420K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 510408K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 31427 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] [Firmware Bug]: AMD-Vi: IOAPIC[17] not in IVRS table
[    0.000000] [Firmware Bug]: AMD-Vi: IOAPIC[18] not in IVRS table
[    0.000000] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[    0.000000] AMD-Vi: Disabling interrupt remapping
[    0.000000] Switched APIC routing to physical flat.
[    0.003000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.008000] tsc: Fast TSC calibration failed
[    0.010000] tsc: PIT calibration matches HPET. 1 loops
[    0.010000] tsc: Detected 2994.468 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.93 BogoMIPS (lpj=2994468)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.011035] Security Framework initialized
[    0.011035] Yama: becoming mindful.
[    0.013422] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.015080] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015138] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.015178] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.015399] CPU: Physical Processor ID: 0
[    0.015400] CPU: Processor Core ID: 0
[    0.015407] mce: CPU supports 23 MCE banks
[    0.015427] LVT offset 1 assigned for vector 0xf9
[    0.015558] LVT offset 2 assigned for vector 0xf4
[    0.015571] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.015572] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.015574] Spectre V2 : Mitigation: Full AMD retpoline
[    0.016635] Freeing SMP alternatives memory: 24K
[    0.021000] smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[    0.024010] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.024014] ... version:                0
[    0.024015] ... bit width:              48
[    0.024015] ... generic registers:      6
[    0.024016] ... value mask:             0000ffffffffffff
[    0.024016] ... max period:             00007fffffffffff
[    0.024017] ... fixed-purpose events:   0
[    0.024017] ... event mask:             000000000000003f
[    0.026006] Hierarchical SRCU implementation.
[    0.032107] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034004] smp: Bringing up secondary CPUs ...
[    0.043016] x86: Booting SMP configuration:
[    0.043017] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.184038] smp: Brought up 1 node, 16 CPUs
[    0.184038] smpboot: Max logical packages: 1
[    0.184038] smpboot: Total of 16 processors activated (95822.97 BogoMIPS)
[    0.186333] devtmpfs: initialized
[    0.186333] x86/mm: Memory block size: 128MB
[    0.187452] PM: Registering ACPI NVS region [mem 0xda81f000-0xdabddfff] (3928064 bytes)
[    0.187452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.187452] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.187452] pinctrl core: initialized pinctrl subsystem
[    0.187452] RTC time: 23:15:03, date: 04/15/18
[    0.187452] NET: Registered protocol family 16
[    0.188118] cpuidle: using governor ladder
[    0.188118] cpuidle: using governor menu
[    0.188118] ACPI: bus type PCI registered
[    0.188118] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.188118] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.188118] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.188118] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.188147] PCI: Using configuration type 1 for base access
[    0.189615] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.189615] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.190006] ACPI: Added _OSI(Module Device)
[    0.190006] ACPI: Added _OSI(Processor Device)
[    0.190006] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.190006] ACPI: Added _OSI(Processor Aggregator Device)
[    0.190108] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.190134] ACPI: Executed 2 blocks of module-level executable AML code
[    0.194666] ACPI Error: Needed [Integer/String/Buffer], found [Region] 000000006c28e304 (20170831/exresop-424)
[    0.194674] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170831/nsinit-426)
[    0.202388] ACPI: Interpreter enabled
[    0.202403] ACPI: (supports S0 S3 S4 S5)
[    0.202404] ACPI: Using IOAPIC for interrupt routing
[    0.202556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.202839] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.213134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.213139] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.213335] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.213523] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.213534] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.213958] PCI host bridge to bus 0000:00
[    0.213960] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.213961] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.213962] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.213963] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff window]
[    0.213965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.213966] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.213967] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.213968] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.213969] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.213976] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.214076] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.214155] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.214200] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.214271] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.214351] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.214427] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.214491] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.214575] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.214658] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.214740] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.214760] pci 0000:00:07.1: enabling Extended Tags
[    0.214783] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.214853] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.214927] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.214947] pci 0000:00:08.1: enabling Extended Tags
[    0.214971] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.215070] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.215211] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.215354] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.215419] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.215482] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.215546] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.215609] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.215673] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.215738] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.215802] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.215929] pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
[    0.215953] pci 0000:03:00.0: reg 0x10: [mem 0xf75a0000-0xf75a7fff 64bit]
[    0.216033] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.216094] pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
[    0.216139] pci 0000:03:00.1: reg 0x24: [mem 0xf7580000-0xf759ffff]
[    0.216147] pci 0000:03:00.1: reg 0x30: [mem 0xf7500000-0xf757ffff pref]
[    0.216184] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.216229] pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
[    0.216301] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.219023] pci 0000:00:01.3: PCI bridge to [bus 03-27]
[    0.219027] pci 0000:00:01.3:   bridge window [io  0xe000-0xefff]
[    0.219030] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.219147] pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
[    0.219237] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[    0.219316] pci 0000:1d:02.0: [1022:43b4] type 01 class 0x060400
[    0.219403] pci 0000:1d:02.0: PME# supported from D3hot D3cold
[    0.219476] pci 0000:1d:03.0: [1022:43b4] type 01 class 0x060400
[    0.219564] pci 0000:1d:03.0: PME# supported from D3hot D3cold
[    0.219639] pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
[    0.219726] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.219796] pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
[    0.219882] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.219951] pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
[    0.220051] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.220138] pci 0000:03:00.2: PCI bridge to [bus 1d-27]
[    0.220143] pci 0000:03:00.2:   bridge window [io  0xe000-0xefff]
[    0.220147] pci 0000:03:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.220197] pci 0000:1d:00.0: PCI bridge to [bus 21]
[    0.220252] pci 0000:1d:02.0: PCI bridge to [bus 23]
[    0.220308] pci 0000:1d:03.0: PCI bridge to [bus 24]
[    0.220406] pci 0000:25:00.0: [1b21:1343] type 00 class 0x0c0330
[    0.220446] pci 0000:25:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
[    0.220660] pci 0000:25:00.0: PME# supported from D3hot D3cold
[    0.223030] pci 0000:1d:04.0: PCI bridge to [bus 25]
[    0.223038] pci 0000:1d:04.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.223126] pci 0000:26:00.0: [8086:1539] type 00 class 0x020000
[    0.223173] pci 0000:26:00.0: reg 0x10: [mem 0xf7300000-0xf731ffff]
[    0.223207] pci 0000:26:00.0: reg 0x18: [io  0xe000-0xe01f]
[    0.223224] pci 0000:26:00.0: reg 0x1c: [mem 0xf7320000-0xf7323fff]
[    0.223394] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[    0.226032] pci 0000:1d:06.0: PCI bridge to [bus 26]
[    0.226038] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.226041] pci 0000:1d:06.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.226125] pci 0000:27:00.0: [168c:0032] type 00 class 0x028000
[    0.226168] pci 0000:27:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff 64bit]
[    0.226217] pci 0000:27:00.0: reg 0x30: [mem 0xf7280000-0xf728ffff pref]
[    0.226314] pci 0000:27:00.0: supports D1 D2
[    0.226316] pci 0000:27:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.229031] pci 0000:1d:07.0: PCI bridge to [bus 27]
[    0.229039] pci 0000:1d:07.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.229149] pci 0000:28:00.0: [10de:1b81] type 00 class 0x030000
[    0.229178] pci 0000:28:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.229192] pci 0000:28:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.229206] pci 0000:28:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.229216] pci 0000:28:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.229225] pci 0000:28:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.229241] pci 0000:28:00.0: BAR 3: assigned to efifb
[    0.229390] pci 0000:28:00.1: [10de:10f0] type 00 class 0x040300
[    0.229411] pci 0000:28:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.232030] pci 0000:00:03.1: PCI bridge to [bus 28]
[    0.232035] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.232037] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.232042] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.232108] pci 0000:29:00.0: [1022:145a] type 00 class 0x130000
[    0.232135] pci 0000:29:00.0: enabling Extended Tags
[    0.232199] pci 0000:29:00.2: [1022:1456] type 00 class 0x108000
[    0.232214] pci 0000:29:00.2: reg 0x18: [mem 0xf7700000-0xf77fffff]
[    0.232223] pci 0000:29:00.2: reg 0x24: [mem 0xf7800000-0xf7801fff]
[    0.232230] pci 0000:29:00.2: enabling Extended Tags
[    0.232296] pci 0000:29:00.3: [1022:145c] type 00 class 0x0c0330
[    0.232310] pci 0000:29:00.3: reg 0x10: [mem 0xf7600000-0xf76fffff 64bit]
[    0.232331] pci 0000:29:00.3: enabling Extended Tags
[    0.232357] pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
[    0.232413] pci 0000:00:07.1: PCI bridge to [bus 29]
[    0.232417] pci 0000:00:07.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.232476] pci 0000:2a:00.0: [1022:1455] type 00 class 0x130000
[    0.232505] pci 0000:2a:00.0: enabling Extended Tags
[    0.232569] pci 0000:2a:00.2: [1022:7901] type 00 class 0x010601
[    0.232598] pci 0000:2a:00.2: reg 0x24: [mem 0xf7908000-0xf7908fff]
[    0.232606] pci 0000:2a:00.2: enabling Extended Tags
[    0.232636] pci 0000:2a:00.2: PME# supported from D3hot D3cold
[    0.232679] pci 0000:2a:00.3: [1022:1457] type 00 class 0x040300
[    0.232688] pci 0000:2a:00.3: reg 0x10: [mem 0xf7900000-0xf7907fff]
[    0.232707] pci 0000:2a:00.3: enabling Extended Tags
[    0.232732] pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
[    0.232789] pci 0000:00:08.1: PCI bridge to [bus 2a]
[    0.232793] pci 0000:00:08.1:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.233271] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.233328] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.233379] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.233440] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.233495] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.233542] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.233589] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.233635] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.234204] pci 0000:28:00.0: vgaarb: setting as boot VGA device
[    0.234204] pci 0000:28:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.234204] pci 0000:28:00.0: vgaarb: bridge control possible
[    0.234204] vgaarb: loaded
[    0.234204] EDAC MC: Ver: 3.0.0
[    0.234258] Registered efivars operations
[    0.273307] PCI: Using ACPI for IRQ routing
[    0.275126] PCI: pci_cache_line_size set to 64 bytes
[    0.275197] e820: reserve RAM buffer [mem 0x01d00000-0x03ffffff]
[    0.275198] e820: reserve RAM buffer [mem 0xda575000-0xdbffffff]
[    0.275199] e820: reserve RAM buffer [mem 0xda81f000-0xdbffffff]
[    0.275200] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[    0.275201] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.275270] NetLabel: Initializing
[    0.275270] NetLabel:  domain hash size = 128
[    0.275271] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.275281] NetLabel:  unlabeled traffic allowed by default
[    0.275304] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.275304] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.277088] clocksource: Switched to clocksource hpet
[    0.285246] VFS: Disk quotas dquot_6.6.0
[    0.285264] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.285335] pnp: PnP ACPI init
[    0.285480] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.285484] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.285549] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285670] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.285849] system 00:03: [io  0x0300-0x030f] has been reserved
[    0.285851] system 00:03: [io  0x0230-0x023f] has been reserved
[    0.285852] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.285855] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.286153] pnp 00:04: [dma 0 disabled]
[    0.286193] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.286453] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.286454] system 00:05: [io  0x040b] has been reserved
[    0.286455] system 00:05: [io  0x04d6] has been reserved
[    0.286457] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.286458] system 00:05: [io  0x0c14] has been reserved
[    0.286459] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.286460] system 00:05: [io  0x0c52] has been reserved
[    0.286462] system 00:05: [io  0x0c6c] has been reserved
[    0.286463] system 00:05: [io  0x0c6f] has been reserved
[    0.286464] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.286465] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.286466] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.286467] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.286469] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.286470] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.286471] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.286472] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.286473] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.286475] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.286476] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.286478] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.286479] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.286480] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.286482] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.286483] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.286485] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.286488] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.286920] pnp: PnP ACPI: found 6 devices
[    0.292964] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.292984] pci 0000:1d:02.0: bridge window [io  0x1000-0x0fff] to [bus 23] add_size 1000
[    0.292986] pci 0000:1d:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 23] add_size 200000 add_align 100000
[    0.292987] pci 0000:1d:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 23] add_size 200000 add_align 100000
[    0.293012] pci 0000:1d:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 26] add_size 200000 add_align 100000
[    0.293025] pci 0000:03:00.2: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 1d-27] add_size 400000 add_align 100000
[    0.293030] pci 0000:00:01.3: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 03-27] add_size 400000 add_align 100000
[    0.293047] pci 0000:00:01.3: BAR 15: assigned [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293049] pci 0000:03:00.2: BAR 15: assigned [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293051] pci 0000:1d:02.0: BAR 14: no space for [mem size 0x00200000]
[    0.293053] pci 0000:1d:02.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.293055] pci 0000:1d:02.0: BAR 15: assigned [mem 0xf2000000-0xf21fffff 64bit pref]
[    0.293056] pci 0000:1d:06.0: BAR 15: assigned [mem 0xf2200000-0xf23fffff 64bit pref]
[    0.293057] pci 0000:1d:02.0: BAR 13: no space for [io  size 0x1000]
[    0.293058] pci 0000:1d:02.0: BAR 13: failed to assign [io  size 0x1000]
[    0.293060] pci 0000:1d:02.0: BAR 14: no space for [mem size 0x00200000]
[    0.293061] pci 0000:1d:02.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.293062] pci 0000:1d:02.0: BAR 13: no space for [io  size 0x1000]
[    0.293063] pci 0000:1d:02.0: BAR 13: failed to assign [io  size 0x1000]
[    0.293064] pci 0000:1d:00.0: PCI bridge to [bus 21]
[    0.293073] pci 0000:1d:02.0: PCI bridge to [bus 23]
[    0.293078] pci 0000:1d:02.0:   bridge window [mem 0xf2000000-0xf21fffff 64bit pref]
[    0.293083] pci 0000:1d:03.0: PCI bridge to [bus 24]
[    0.293092] pci 0000:1d:04.0: PCI bridge to [bus 25]
[    0.293096] pci 0000:1d:04.0:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.293102] pci 0000:1d:06.0: PCI bridge to [bus 26]
[    0.293104] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.293107] pci 0000:1d:06.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.293110] pci 0000:1d:06.0:   bridge window [mem 0xf2200000-0xf23fffff 64bit pref]
[    0.293114] pci 0000:1d:07.0: PCI bridge to [bus 27]
[    0.293118] pci 0000:1d:07.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.293124] pci 0000:03:00.2: PCI bridge to [bus 1d-27]
[    0.293126] pci 0000:03:00.2:   bridge window [io  0xe000-0xefff]
[    0.293129] pci 0000:03:00.2:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.293131] pci 0000:03:00.2:   bridge window [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293135] pci 0000:00:01.3: PCI bridge to [bus 03-27]
[    0.293137] pci 0000:00:01.3:   bridge window [io  0xe000-0xefff]
[    0.293139] pci 0000:00:01.3:   bridge window [mem 0xf7200000-0xf75fffff]
[    0.293141] pci 0000:00:01.3:   bridge window [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293143] pci 0000:00:03.1: PCI bridge to [bus 28]
[    0.293145] pci 0000:00:03.1:   bridge window [io  0xd000-0xdfff]
[    0.293148] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.293150] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.293154] pci 0000:00:07.1: PCI bridge to [bus 29]
[    0.293156] pci 0000:00:07.1:   bridge window [mem 0xf7600000-0xf78fffff]
[    0.293160] pci 0000:00:08.1: PCI bridge to [bus 2a]
[    0.293162] pci 0000:00:08.1:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.293166] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.293167] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.293168] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.293169] pci_bus 0000:00: resource 7 [io  0x0d00-0xefff window]
[    0.293170] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.293171] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.293172] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.293173] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.293174] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.293175] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf75fffff]
[    0.293176] pci_bus 0000:03: resource 2 [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293177] pci_bus 0000:1d: resource 0 [io  0xe000-0xefff]
[    0.293178] pci_bus 0000:1d: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.293179] pci_bus 0000:1d: resource 2 [mem 0xf2000000-0xf25fffff 64bit pref]
[    0.293180] pci_bus 0000:23: resource 2 [mem 0xf2000000-0xf21fffff 64bit pref]
[    0.293181] pci_bus 0000:25: resource 1 [mem 0xf7400000-0xf74fffff]
[    0.293182] pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
[    0.293183] pci_bus 0000:26: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.293184] pci_bus 0000:26: resource 2 [mem 0xf2200000-0xf23fffff 64bit pref]
[    0.293185] pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.293186] pci_bus 0000:28: resource 0 [io  0xd000-0xdfff]
[    0.293187] pci_bus 0000:28: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.293188] pci_bus 0000:28: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.293189] pci_bus 0000:29: resource 1 [mem 0xf7600000-0xf78fffff]
[    0.293190] pci_bus 0000:2a: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.293266] NET: Registered protocol family 2
[    0.293405] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.293583] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.293725] TCP: Hash tables configured (established 131072 bind 65536)
[    0.293776] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.293821] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.293899] NET: Registered protocol family 1
[    0.294177] pci 0000:28:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.294290] PCI: CLS 64 bytes, default 64
[    0.294319] Unpacking initramfs...
[    0.372211] Freeing initrd memory: 7024K
[    0.372218] Translation is already enabled - trying to copy translation structures
[    0.372237] Wrong old irq remapping flag: 0x0
[    0.372241] Failed to copy DEV table from previous kernel.
[    0.372360] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.373355] amd_uncore: AMD NB counters detected
[    0.373358] amd_uncore: AMD LLC counters detected
[    0.374118] Scanning for low memory corruption every 60 seconds
[    0.374640] Initialise system trusted keyrings
[    0.374652] Key type blacklist registered
[    0.374725] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.375525] zbud: loaded
[    0.377972] Key type asymmetric registered
[    0.377973] Asymmetric key parser 'x509' registered
[    0.377994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.378067] io scheduler noop registered
[    0.378068] io scheduler deadline registered
[    0.378100] io scheduler cfq registered (default)
[    0.378101] io scheduler mq-deadline registered
[    0.378102] io scheduler kyber registered
[    0.378121] io scheduler bfq registered
[    0.379429] efifb: probing for efifb
[    0.379439] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[    0.379440] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.379440] efifb: scrolling: redraw
[    0.379442] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.380806] Console: switching to colour frame buffer device 128x48
[    0.381975] fb0: EFI VGA frame buffer device
[    0.382034] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.382043] ACPI: Power Button [PWRB]
[    0.382074] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.382119] ACPI: Power Button [PWRF]
[    0.386354] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.407218] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.409383] ledtrig-cpu: registered to indicate activity on CPUs
[    0.409579] NET: Registered protocol family 10
[    0.412531] Segment Routing with IPv6
[    0.412546] NET: Registered protocol family 17
[    0.413405] RAS: Correctable Errors collector initialized.
[    0.420586] microcode: CPU0: patch_level=0x08001105
[    0.420594] microcode: CPU1: patch_level=0x08001105
[    0.420614] microcode: CPU2: patch_level=0x08001105
[    0.420621] microcode: CPU3: patch_level=0x08001105
[    0.420642] microcode: CPU4: patch_level=0x08001105
[    0.420650] microcode: CPU5: patch_level=0x08001105
[    0.420654] microcode: CPU6: patch_level=0x08001105
[    0.420658] microcode: CPU7: patch_level=0x08001105
[    0.420678] microcode: CPU8: patch_level=0x08001105
[    0.420686] microcode: CPU9: patch_level=0x08001105
[    0.420704] microcode: CPU10: patch_level=0x08001105
[    0.420710] microcode: CPU11: patch_level=0x08001105
[    0.420729] microcode: CPU12: patch_level=0x08001105
[    0.420736] microcode: CPU13: patch_level=0x08001105
[    0.420742] microcode: CPU14: patch_level=0x08001105
[    0.420749] microcode: CPU15: patch_level=0x08001105
[    0.420801] microcode: Microcode Update Driver: v2.2.
[    0.420812] sched_clock: Marking stable (420793624, 0)->(560933512, -140139888)
[    0.421144] registered taskstats version 1
[    0.421151] Loading compiled-in X.509 certificates
[    0.421172] zswap: loaded using pool lzo/zbud
[    0.423395] Key type big_key registered
[    0.423739]   Magic number: 14:275:302
[    0.423759] tty tty31: hash matches
[    0.423813] hctosys: unable to open rtc device (rtc0)
[    0.425674] Freeing unused kernel memory: 1432K
[    0.425675] Write protecting the kernel read-only data: 16384k
[    0.426283] Freeing unused kernel memory: 2016K
[    0.428216] Freeing unused kernel memory: 872K
[    0.714339] SCSI subsystem initialized
[    0.715804] ACPI: bus type USB registered
[    0.715818] usbcore: registered new interface driver usbfs
[    0.715823] usbcore: registered new interface driver hub
[    0.715881] usbcore: registered new device driver usb
[    0.717566] libata version 3.00 loaded.
[    0.718916] QUIRK: Enable AMD PLL fix
[    0.718935] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.718939] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.774306] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
[    0.774420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.774422] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.774423] usb usb1: Product: xHCI Host Controller
[    0.774423] usb usb1: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.774424] usb usb1: SerialNumber: 0000:03:00.0
[    0.774525] hub 1-0:1.0: USB hub found
[    0.774539] hub 1-0:1.0: 14 ports detected
[    0.782553] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.782556] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.782557] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.782585] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.782602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.782603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.782605] usb usb2: Product: xHCI Host Controller
[    0.782606] usb usb2: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.782607] usb usb2: SerialNumber: 0000:03:00.0
[    0.782812] hub 2-0:1.0: USB hub found
[    0.782822] hub 2-0:1.0: 8 ports detected
[    0.787450] ahci 0000:03:00.1: version 3.0
[    0.787544] xhci_hcd 0000:25:00.0: xHCI Host Controller
[    0.787547] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
[    0.787587] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    0.787641] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    0.787644] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.788265] scsi host0: ahci
[    0.788388] scsi host1: ahci
[    0.788524] scsi host2: ahci
[    0.788616] scsi host3: ahci
[    0.788700] scsi host4: ahci
[    0.788789] scsi host5: ahci
[    0.788899] scsi host6: ahci
[    0.788980] scsi host7: ahci
[    0.789013] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 38
[    0.789015] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 38
[    0.789016] ata3: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580200 irq 38
[    0.789017] ata4: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580280 irq 38
[    0.789019] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 38
[    0.789020] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 38
[    0.789022] ata7: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580400 irq 38
[    0.789023] ata8: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580480 irq 38
[    0.789138] ahci 0000:2a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.789141] ahci 0000:2a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.789318] scsi host8: ahci
[    0.789376] ata9: SATA max UDMA/133 abar m4096@0xf7908000 port 0xf7908100 irq 40
[    0.846477] xhci_hcd 0000:25:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[    0.846685] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.846686] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.846687] usb usb3: Product: xHCI Host Controller
[    0.846687] usb usb3: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.846688] usb usb3: SerialNumber: 0000:25:00.0
[    0.846780] hub 3-0:1.0: USB hub found
[    0.846787] hub 3-0:1.0: 2 ports detected
[    0.846853] xhci_hcd 0000:25:00.0: xHCI Host Controller
[    0.846855] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4
[    0.846857] xhci_hcd 0000:25:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.846882] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.846896] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.846897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.846898] usb usb4: Product: xHCI Host Controller
[    0.846899] usb usb4: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.846900] usb usb4: SerialNumber: 0000:25:00.0
[    0.846970] hub 4-0:1.0: USB hub found
[    0.846977] hub 4-0:1.0: 2 ports detected
[    0.847110] xhci_hcd 0000:29:00.3: xHCI Host Controller
[    0.847112] xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 5
[    0.847215] xhci_hcd 0000:29:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
[    0.847292] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.847293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.847294] usb usb5: Product: xHCI Host Controller
[    0.847295] usb usb5: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.847296] usb usb5: SerialNumber: 0000:29:00.3
[    0.847374] hub 5-0:1.0: USB hub found
[    0.847380] hub 5-0:1.0: 4 ports detected
[    0.847525] xhci_hcd 0000:29:00.3: xHCI Host Controller
[    0.847527] xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 6
[    0.847538] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.847552] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.847553] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.847554] usb usb6: Product: xHCI Host Controller
[    0.847555] usb usb6: Manufacturer: Linux 4.15.15-1-ARCH xhci-hcd
[    0.847556] usb usb6: SerialNumber: 0000:29:00.3
[    0.847632] hub 6-0:1.0: USB hub found
[    0.847637] hub 6-0:1.0: 4 ports detected
[    1.104509] ata9: SATA link down (SStatus 0 SControl 300)
[    1.167369] usb 1-11: new high-speed USB device number 2 using xhci_hcd
[    1.177423] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.195414] usb 6-2: New USB device found, idVendor=0bc2, idProduct=2322
[    1.195416] usb 6-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.195417] usb 6-2: Product: Expansion
[    1.195418] usb 6-2: Manufacturer: Seagate
[    1.195418] usb 6-2: SerialNumber: NA8CR0V0
[    1.197475] usbcore: registered new interface driver usb-storage
[    1.198603] scsi host9: uas
[    1.198667] usbcore: registered new interface driver uas
[    1.199024] scsi 9:0:0:0: Direct-Access     Seagate  Expansion        9300 PQ: 0 ANSI: 6
[    1.231367] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.263045] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.264944] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    1.264946] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.266441] ata1.00: configured for UDMA/133
[    1.266957] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[    1.375342] tsc: Refined TSC clocksource calibration: 2994.374 MHz
[    1.375357] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29828a32c, max_idle_ns: 440795270613 ns
[    1.379130] usb 1-11: New USB device found, idVendor=0781, idProduct=5567
[    1.379133] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.379134] usb 1-11: Product: Cruzer Blade
[    1.379135] usb 1-11: Manufacturer: SanDisk
[    1.379136] usb 1-11: SerialNumber: 200443217307A5111272
[    1.382133] usb-storage 1-11:1.0: USB Mass Storage device detected
[    1.382449] scsi host10: usb-storage 1-11:1.0
[    1.558366] usb 1-13: new high-speed USB device number 3 using xhci_hcd
[    1.574633] ata2: SATA link down (SStatus 0 SControl 300)
[    1.601521] usb 3-1: New USB device found, idVendor=0c45, idProduct=5004
[    1.601523] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.601525] usb 3-1: Product: USB DEVICE
[    1.601526] usb 3-1: Manufacturer: SONiX
[    1.605566] hidraw: raw HID events driver (C) Jiri Kosina
[    1.617048] usbcore: registered new interface driver usbhid
[    1.617050] usbhid: USB HID core driver
[    1.618126] input: SONiX USB DEVICE as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-1/3-1:1.0/0003:0C45:5004.0001/input/input2
[    1.670452] hid-generic 0003:0C45:5004.0001: input,hidraw0: USB HID v1.11 Keyboard [SONiX USB DEVICE] on usb-0000:25:00.0-1/input0
[    1.671008] input: SONiX USB DEVICE as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-1/3-1:1.1/0003:0C45:5004.0002/input/input3
[    1.723623] hid-generic 0003:0C45:5004.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [SONiX USB DEVICE] on usb-0000:25:00.0-1/input1
[    1.778164] usb 1-13: New USB device found, idVendor=0951, idProduct=1643
[    1.778167] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.778168] usb 1-13: Product: DataTraveler G3
[    1.778169] usb 1-13: Manufacturer: Kingston
[    1.778170] usb 1-13: SerialNumber: F46D04613D6BBC8109200016
[    1.780061] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    1.781582] usb-storage 1-13:1.0: USB Mass Storage device detected
[    1.781938] scsi host11: usb-storage 1-13:1.0
[    2.047362] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.049233] ata3.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
[    2.051378] ata3.00: configured for UDMA/100
[    2.052588] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7280S  1.01 PQ: 0 ANSI: 5
[    2.082568] usb 3-2: New USB device found, idVendor=258a, idProduct=1007
[    2.082570] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.082572] usb 3-2: Product: Game Mouse
[    2.082573] usb 3-2: Manufacturer: SINOWEALTH
[    2.097804] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-2/3-2:1.0/0003:258A:1007.0003/input/input4
[    2.097881] hid-generic 0003:258A:1007.0003: input,hidraw2: USB HID v1.11 Mouse [SINOWEALTH Game Mouse] on usb-0000:25:00.0-2/input0
[    2.129267] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:1d:04.0/0000:25:00.0/usb3/3-2/3-2:1.1/0003:258A:1007.0004/input/input5
[    2.181495] hid-generic 0003:258A:1007.0004: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [SINOWEALTH Game Mouse] on usb-0000:25:00.0-2/input1
[    2.383302] clocksource: Switched to clocksource tsc
[    2.391347] ata4: SATA link down (SStatus 0 SControl 300)
[    2.402673] scsi 10:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[    2.404213] sd 0:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.404216] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[    2.404231] sd 0:0:0:0: [sdb] Write Protect is off
[    2.404234] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.404277] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.404333] sd 10:0:0:0: [sdc] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.404480] sd 9:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.404483] sd 9:0:0:0: [sda] 4096-byte physical blocks
[    2.404597] sd 9:0:0:0: [sda] Write Protect is off
[    2.404598] sd 9:0:0:0: [sda] Mode Sense: 4f 00 00 00
[    2.404755] sd 9:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.404871] xhci_hcd 0000:29:00.3: ERROR Transfer event for unknown stream ring slot 1 ep 2
[    2.404905] xhci_hcd 0000:29:00.3: @000000040b8a3420 00000000 00000000 1b000000 01038001
[    2.406481] sd 10:0:0:0: [sdc] Write Protect is off
[    2.406483] sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    2.407153]  sda: sda1
[    2.408002] sd 9:0:0:0: [sda] Attached SCSI disk
[    2.408319] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.416161]  sdc: sdc1
[    2.420408] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[    2.457494]  sdb: sdb1 sdb2 sdb3 sdb4
[    2.458034] sd 0:0:0:0: [sdb] Attached SCSI disk
[    2.704491] ata5: SATA link down (SStatus 0 SControl 300)
[    2.788031] scsi 11:0:0:0: Direct-Access     Kingston DataTraveler G3  PMAP PQ: 0 ANSI: 0 CCS
[    2.788843] sd 11:0:0:0: [sdd] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    2.789655] sd 11:0:0:0: [sdd] Write Protect is off
[    2.789657] sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    2.790458] sd 11:0:0:0: [sdd] No Caching mode page found
[    2.790479] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[    2.794259]  sdd: sdd1 sdd2
[    2.798052] sd 11:0:0:0: [sdd] Attached SCSI removable disk
[    3.015300] ata6: SATA link down (SStatus 0 SControl 300)
[    3.487362] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.487509] ata7.00: ATA-11: KINGSTON SA400S37480G, SBFK71E0, max UDMA/133
[    3.487511] ata7.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.487600] ata7.00: configured for UDMA/133
[    3.487935] scsi 6:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[    3.488137] sd 6:0:0:0: [sde] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    3.488145] sd 6:0:0:0: [sde] Write Protect is off
[    3.488147] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    3.488157] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.490381]  sde: sde1 sde2 sde3 sde4 sde5
[    3.490644] sd 6:0:0:0: [sde] Attached SCSI disk
[    3.798633] ata8: SATA link down (SStatus 0 SControl 300)
[    3.807932] sr 2:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.807934] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.808063] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.839293] random: crng init done
[    4.169826] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
[    4.276703] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.282522] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.295153] systemd[1]: Detected architecture x86-64.
[    4.300784] systemd[1]: Set hostname to <rockisch>.
[    4.376744] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.376797] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.377660] systemd[1]: Listening on Process Core Dump Socket.
[    4.377693] systemd[1]: Listening on udev Control Socket.
[    4.378953] systemd[1]: Created slice User and Session Slice.
[    4.379219] systemd[1]: Created slice system-getty.slice.
[    4.379348] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.395742] EXT4-fs (sde2): re-mounted. Opts: data=ordered
[    4.437197] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.439857] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.441817] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.441819] cfg80211: failed to load regulatory.db
[    4.457008] acpi_cpufreq: overriding BIOS provided _PSD data
[    4.475476] rtc_cmos 00:02: RTC can wake from S4
[    4.475613] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.475647] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.476080] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    4.484861] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.484863] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.485063] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.491876] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.516521] mousedev: PS/2 mouse device common for all mice
[    4.516646] dca service started, version 1.12.1
[    4.516769] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    4.516853] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
[    4.516857] sp5100_tco: I/O address 0x0cd6 already in use
[    4.522802] AVX2 version of gcm_enc/dec engaged.
[    4.522805] AES CTR mode by8 optimization enabled
[    4.526149] ccp 0000:29:00.2: enabling device (0000 -> 0002)
[    4.526903] ccp 0000:29:00.2: ccp enabled
[    4.526904] ccp 0000:29:00.2: enabled
[    4.527425] pps_core: LinuxPPS API ver. 1 registered
[    4.527426] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.540215] PTP clock support registered
[    4.540734] asus_wmi: ASUS WMI generic driver loaded
[    4.541479] ipmi message handler version 39.2
[    4.543545] ath9k 0000:27:00.0: enabling device (0000 -> 0002)
[    4.543879] ipmi device interface
[    4.543968] asus_wmi: Initialization: 0x0
[    4.544244] asus_wmi: BIOS WMI version: 0.9
[    4.544385] asus_wmi: SFUN value: 0x0
[    4.545048] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[    4.545247] asus_wmi: Number of fans: 1
[    4.545681] Adding 1048572k swap on /dev/sde3.  Priority:-2 extents:1 across:1048572k SSFS
[    4.549147] Linux agpgart interface v0.103
[    4.552468] ath: EEPROM regdomain: 0x21
[    4.552469] ath: EEPROM indicates we should expect a direct regpair map
[    4.552471] ath: Country alpha2 being used: AU
[    4.552472] ath: Regpair used: 0x21
[    4.552523] nommu_map_single: overflow 409acf040+1974 of device mask ffffffff
[    4.552563] ath: phy0: dma_mapping_error() on RX init
[    4.552610] ath9k 0000:27:00.0: Failed to initialize device
[    4.552769] ath9k: probe of 0000:27:00.0 failed with error -12
[    4.556217] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    4.556218] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.592666] snd_hda_intel 0000:28:00.1: Disabling MSI
[    4.592675] snd_hda_intel 0000:28:00.1: Handle vga_switcheroo audio client
[    4.592770] snd_hda_intel 0000:2a:00.3: enabling device (0000 -> 0002)
[    4.606408] kvm: disabled by bios
[    4.609451] MCE: In-kernel MCE decoding enabled.
[    4.612208] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.612210] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    4.621290] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.621292] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.621294] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.621295] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.621296] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.621297] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.621298] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.621299] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.621300] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.631626] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.631628] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    4.637257] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input8
[    4.637313] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input9
[    4.637360] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input10
[    4.637411] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input11
[    4.637459] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input12
[    4.637502] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input13
[    4.637554] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input14
[    4.637589] snd_hda_intel 0000:2a:00.3: device 1043:8733 is on the power_save blacklist, forcing power_save to 0
[    4.699650] nvidia: loading out-of-tree module taints kernel.
[    4.699658] nvidia: module license 'NVIDIA' taints kernel.
[    4.699659] Disabling lock debugging due to kernel taint
[    4.715090] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[    4.715383] nvidia 0000:28:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.715464] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.48  Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[    4.724716] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.48  Wed Mar 21 23:48:34 PDT 2018
[    4.726262] [drm] [nvidia-drm] [GPU ID 0x00002800] Loading driver
[    4.726264] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:28:00.0 on minor 0
[    4.790406] pps pps0: new PPS source ptp0
[    4.790412] igb 0000:26:00.0: added PHC on eth0
[    4.790415] igb 0000:26:00.0: Intel(R) Gigabit Ethernet Network Connection
[    4.790418] igb 0000:26:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 60:45:cb:9b:46:1b
[    4.790421] igb 0000:26:00.0: eth0: PBA No: FFFFFF-0FF
[    4.790424] igb 0000:26:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    4.792378] igb 0000:26:00.0 enp38s0: renamed from eth0
[    4.883581] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input15
[    4.883796] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input16
[    4.883861] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input17
[    4.883946] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:28:00.1/sound/card0/input18
[    4.919221] REISERFS (device sde4): found reiserfs format "3.6" with standard journal
[    4.919231] REISERFS (device sde4): using ordered data mode
[    4.919231] reiserfs: using flush barriers
[    4.919453] REISERFS (device sde4): journal params: device sde4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    4.919683] REISERFS (device sde4): checking transaction log (sde4)
[    4.920811] REISERFS (device sde4): Using r5 hash to sort names
[    4.924277] EXT4-fs (sde5): mounted filesystem with ordered data mode. Opts: data=ordered
[    4.928795] systemd-journald[367]: Received request to flush runtime journal from PID 1
loqs wrote:

Oh and welcome to the arch linux forums rockisch.

Thanks smile

Offline

#4 2018-04-15 23:35:22

loqs
Member
Registered: 2014-03-06
Posts: 18,859

Re: [SOLVED] Issues loading ath9k module for my wireless card

https://ubuntuforums.org/archive/index. … 63730.html
using the iommu=soft boot parameter would test if it is a firmware issue.

Offline

#5 2018-04-15 23:44:24

rockisch
Member
From: Brazil
Registered: 2018-04-15
Posts: 4

Re: [SOLVED] Issues loading ath9k module for my wireless card

loqs wrote:

https://ubuntuforums.org/archive/index. … 63730.html
using the iommu=soft boot parameter would test if it is a firmware issue.

Uhh, sorry for asking such a dumb question, but where should I put "iommu=soft" on the file? Looking at my grub file, every property starts with GRUB_SOMETHING="something". Should I add that to one of those GRUB_SOMETHING properties?

Offline

#6 2018-04-15 23:46:45

loqs
Member
Registered: 2014-03-06
Posts: 18,859

Re: [SOLVED] Issues loading ath9k module for my wireless card

Kernel_parameters#GRUB you can boot and edit the current configuration as a test before making the change permanent.

Offline

#7 2018-04-15 23:58:25

rockisch
Member
From: Brazil
Registered: 2018-04-15
Posts: 4

Re: [SOLVED] Issues loading ath9k module for my wireless card

Ok, I don't know what that did, but seems like now it is starting the module correctly:

[    4.554796] ath9k 0000:27:00.0: enabling device (0000 -> 0002)
[    4.588393] ath9k 0000:27:00.0 wlp39s0: renamed from wlan0

Even though I'm still without internet connection.

But at least I can try to solve that now.

Offline

Pages: 1

Board footer

Powered by FluxBB