You are not logged in.

#1 2018-04-23 04:21:55

mrgaturus
Member
Registered: 2018-04-23
Posts: 2

drm.edid_firmware broken in kernel 4.15 and above

Hi everyone, drm.edid_firmware doesn't make any change after update from kernel 4.14 to 4.15 and 4.16. dmesg doesn't show anything about edid firmware

Graphics Card: Radeon R7 260X, Sea Islands/BONAIRE
Module: radeon
X Driver: xf86-video-ati

Kernel parameters

 rw quiet drm.edid_firmware=edid/edid.bin 

Dmesg

[    0.000000] Linux version 4.16.3-1-ARCH (builduser@heftig-2067) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Thu Apr 19 09:17:56 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=be228527-ebb5-4352-9eca-8c8dd445c805 rw quiet drm.edid_firmware=DVI-I-1:edid/edid.bin
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x1d9/0x220 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7e7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7e80000-0x00000000c7e97fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c7e98000-0x00000000c7ebffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7efffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000136ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M5A78L-M LX PLUS, BIOS 1701    09/11/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x137000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000137000000 aka 4976M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xc7e80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x12564a000, 0x12564afff] PGTABLE
[    0.000000] BRK [0x12564b000, 0x12564bfff] PGTABLE
[    0.000000] BRK [0x12564c000, 0x12564cfff] PGTABLE
[    0.000000] BRK [0x12564d000, 0x12564dfff] PGTABLE
[    0.000000] BRK [0x12564e000, 0x12564efff] PGTABLE
[    0.000000] BRK [0x12564f000, 0x12564ffff] PGTABLE
[    0.000000] BRK [0x125650000, 0x125650fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3724b000-0x3791cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB490 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000C7E80100 000054 (v01 091114 XSDT1137 20140911 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C7E80290 0000F4 (v03 091114 FACP1137 20140911 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20180105/tbfadt-603)
[    0.000000] ACPI: DSDT 0x00000000C7E80460 00DA87 (v01 A1969  A1969001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000C7E98000 000040
[    0.000000] ACPI: FACS 0x00000000C7E98000 000040
[    0.000000] ACPI: APIC 0x00000000C7E80390 00008C (v01 091114 APIC1137 20140911 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C7E80420 00003C (v01 091114 OEMMCFG  20140911 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C7E98040 000072 (v01 091114 OEMB1137 20140911 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000C7E8F460 000038 (v01 091114 OEMHPET  20140911 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C7E8F4A0 001158 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000136ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x136ffd000-0x136ffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000136ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c7e7ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000136ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000136ffffff]
[    0.000000] On node 0 totalpages: 1043998
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12730 pages used for memmap
[    0.000000]   DMA32 zone: 814720 pages, LIFO batch:31
[    0.000000]   Normal zone: 3520 pages used for memmap
[    0.000000]   Normal zone: 225280 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7e80000-0xc7e97fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7e98000-0xc7ebffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7efffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xc7f00000-0xffdfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027663
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=be228527-ebb5-4352-9eca-8c8dd445c805 rw quiet drm.edid_firmware=DVI-I-1:edid/edid.bin
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[    0.000000] Memory: 3947492K/4175992K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 228500K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 31747 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 3515.948 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32ae2aa56e4, max_idle_ns: 440795233918 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 7034.89 BogoMIPS (lpj=11719826)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019999] CPU: Physical Processor ID: 0
[    0.019999] CPU: Processor Core ID: 0
[    0.019999] mce: CPU supports 7 MCE banks
[    0.019999] LVT offset 1 assigned for vector 0xf9
[    0.019999] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.019999] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.019999] Spectre V2 : Mitigation: Full AMD retpoline
[    0.019999] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.019999] Freeing SMP alternatives memory: 24K
[    0.026666] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.036676] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.036681] ... version:                0
[    0.036682] ... bit width:              48
[    0.036682] ... generic registers:      6
[    0.036683] ... value mask:             0000ffffffffffff
[    0.036684] ... max period:             00007fffffffffff
[    0.036684] ... fixed-purpose events:   0
[    0.036685] ... event mask:             000000000000003f
[    0.043338] Hierarchical SRCU implementation.
[    0.063413] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.070005] smp: Bringing up secondary CPUs ...
[    0.100016] x86: Booting SMP configuration:
[    0.100018] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.222665] smp: Brought up 1 node, 6 CPUs
[    0.222665] smpboot: Max logical packages: 2
[    0.222665] smpboot: Total of 6 processors activated (42208.34 BogoMIPS)
[    0.223640] devtmpfs: initialized
[    0.223640] x86/mm: Memory block size: 128MB
[    0.223833] PM: Registering ACPI NVS region [mem 0xc7e98000-0xc7ebffff] (163840 bytes)
[    0.223833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.223833] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.223833] pinctrl core: initialized pinctrl subsystem
[    0.223833] RTC time:  3:49:43, date: 04/23/18
[    0.223833] NET: Registered protocol family 16
[    0.223833] cpuidle: using governor ladder
[    0.226685] cpuidle: using governor menu
[    0.226716] ACPI: bus type PCI registered
[    0.226718] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.226793] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.226796] PCI: not using MMCONFIG
[    0.226797] PCI: Using configuration type 1 for base access
[    0.226797] PCI: Using configuration type 1 for extended access
[    0.226891] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.226892] mtrr: probably your BIOS does not setup all CPUs.
[    0.226892] mtrr: corrected configuration.
[    0.230060] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.230060] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.230121] ACPI: Added _OSI(Module Device)
[    0.230122] ACPI: Added _OSI(Processor Device)
[    0.230122] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.230123] ACPI: Added _OSI(Processor Aggregator Device)
[    0.230833] ACPI: Executed 3 blocks of module-level executable AML code
[    0.367908] ACPI: Interpreter enabled
[    0.367935] ACPI: (supports S0 S1 S3 S4 S5)
[    0.367936] ACPI: Using IOAPIC for interrupt routing
[    0.367965] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.369881] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.369894] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.370489] ACPI: Enabled 7 GPEs in block 00 to 1F
[    0.379550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.379554] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.379559] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.379921] PCI host bridge to bus 0000:00
[    0.379923] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.379925] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.379926] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.379927] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.379929] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
[    0.379930] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.379931] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.379940] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[    0.380064] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[    0.380083] pci 0000:00:02.0: enabling Extended Tags
[    0.380111] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.380200] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[    0.380218] pci 0000:00:04.0: enabling Extended Tags
[    0.380241] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.380344] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.380366] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.380375] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.380384] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.380393] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.380402] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.380411] pci 0000:00:11.0: reg 0x24: [mem 0xfeaffc00-0xfeafffff]
[    0.380432] pci 0000:00:11.0: set SATA to AHCI mode
[    0.380538] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.380556] pci 0000:00:12.0: reg 0x10: [mem 0xfeafe000-0xfeafefff]
[    0.380693] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.380711] pci 0000:00:12.1: reg 0x10: [mem 0xfeafd000-0xfeafdfff]
[    0.380852] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.380873] pci 0000:00:12.2: reg 0x10: [mem 0xfeaff800-0xfeaff8ff]
[    0.380953] pci 0000:00:12.2: supports D1 D2
[    0.380954] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.381046] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.381064] pci 0000:00:13.0: reg 0x10: [mem 0xfeafc000-0xfeafcfff]
[    0.381202] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.381219] pci 0000:00:13.1: reg 0x10: [mem 0xfeafb000-0xfeafbfff]
[    0.381361] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.381382] pci 0000:00:13.2: reg 0x10: [mem 0xfeaff400-0xfeaff4ff]
[    0.381462] pci 0000:00:13.2: supports D1 D2
[    0.381463] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.381555] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.381720] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.381740] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.381749] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.381758] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.381766] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.381775] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.381795] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.381796] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.381797] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.381798] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.381903] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.381927] pci 0000:00:14.2: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff 64bit]
[    0.381994] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.382078] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.382228] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.382348] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.382366] pci 0000:00:14.5: reg 0x10: [mem 0xfeafa000-0xfeafafff]
[    0.382503] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.382584] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.382661] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.382738] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.382818] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.382894] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.383013] pci 0000:01:00.0: [1002:6658] type 00 class 0x030000
[    0.383036] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.383046] pci 0000:01:00.0: reg 0x18: [mem 0xcf800000-0xcfffffff 64bit pref]
[    0.383053] pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.383060] pci 0000:01:00.0: reg 0x24: [mem 0xfeb80000-0xfebbffff]
[    0.383067] pci 0000:01:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.383072] pci 0000:01:00.0: enabling Extended Tags
[    0.383122] pci 0000:01:00.0: supports D1 D2
[    0.383123] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.383184] pci 0000:01:00.1: [1002:0002] type 00 class 0x040300
[    0.383204] pci 0000:01:00.1: reg 0x10: [mem 0xfebf8000-0xfebfbfff 64bit]
[    0.383237] pci 0000:01:00.1: enabling Extended Tags
[    0.383278] pci 0000:01:00.1: supports D1 D2
[    0.393353] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.393357] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.393359] pci 0000:00:02.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.393362] pci 0000:00:02.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.393419] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.393440] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.393463] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.393475] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[    0.393545] pci 0000:02:00.0: supports D1 D2
[    0.393546] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.403350] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.403354] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.403357] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.403434] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.403442] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.403443] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.403444] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.403446] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.403447] pci 0000:00:14.4:   bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
[    0.403448] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.404530] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 12 14 15)
[    0.404590] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[    0.404648] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.404706] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.404764] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.404823] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.404882] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[    0.404938] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.406677] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.406679] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.406680] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.406681] vgaarb: loaded
[    0.406840] EDAC MC: Ver: 3.0.0
[    0.406913] PCI: Using ACPI for IRQ routing
[    0.416798] PCI: pci_cache_line_size set to 64 bytes
[    0.416847] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.416849] e820: reserve RAM buffer [mem 0xc7e80000-0xc7ffffff]
[    0.416850] e820: reserve RAM buffer [mem 0x137000000-0x137ffffff]
[    0.416932] NetLabel: Initializing
[    0.416933] NetLabel:  domain hash size = 128
[    0.416933] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.416946] NetLabel:  unlabeled traffic allowed by default
[    0.416954] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.416954] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.418777] clocksource: Switched to clocksource tsc-early
[    0.428112] VFS: Disk quotas dquot_6.6.0
[    0.428127] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.428185] pnp: PnP ACPI init
[    0.428367] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.428421] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.429132] pnp 00:02: [dma 0 disabled]
[    0.429364] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.429918] pnp 00:03: [dma 0 disabled]
[    0.429985] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.430110] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.430112] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.430115] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430413] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.430415] system 00:05: [io  0x040b] has been reserved
[    0.430416] system 00:05: [io  0x04d6] has been reserved
[    0.430417] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.430419] system 00:05: [io  0x0c14] has been reserved
[    0.430420] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.430421] system 00:05: [io  0x0c52] has been reserved
[    0.430423] system 00:05: [io  0x0c6c] has been reserved
[    0.430424] system 00:05: [io  0x0c6f] has been reserved
[    0.430427] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.430428] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.430430] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.430431] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.430432] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.430433] system 00:05: [io  0x0b00-0x0b3f] has been reserved
[    0.430435] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.430436] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.430437] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.430438] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.430440] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.430441] system 00:05: [io  0xfe00-0xfefe] has been reserved
[    0.430443] system 00:05: [mem 0xc7f00000-0xc7ffffff] has been reserved
[    0.430444] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.430446] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.430447] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.430451] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430698] system 00:06: [io  0x0230-0x023f] has been reserved
[    0.430700] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.430701] system 00:06: [io  0x0300-0x030f] has been reserved
[    0.430702] system 00:06: [io  0x0a30-0x0a3f] has been reserved
[    0.430706] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430771] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.430774] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.431266] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.431268] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.431270] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.431271] system 00:08: [mem 0x00100000-0xc7efffff] could not be reserved
[    0.431273] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.431277] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.431402] pnp: PnP ACPI: found 9 devices
[    0.437431] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.437448] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.437450] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.437453] pci 0000:00:02.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.437455] pci 0000:00:02.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.437457] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.437459] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.437462] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.437465] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.437477] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.437479] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.437480] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.437481] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.437483] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.437484] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.437485] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.437487] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.437488] pci_bus 0000:01: resource 2 [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.437489] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.437490] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.437492] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.437493] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.437494] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.437496] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.437497] pci_bus 0000:03: resource 8 [mem 0xc7f00000-0xdfffffff window]
[    0.437498] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.437577] NET: Registered protocol family 2
[    0.437735] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.437754] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.437825] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.437915] TCP: Hash tables configured (established 32768 bind 32768)
[    0.437956] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.437972] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.438028] NET: Registered protocol family 1
[    0.893809] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.893815] PCI: CLS 64 bytes, default 64
[    0.893856] Unpacking initramfs...
[    0.984902] Freeing initrd memory: 6984K
[    0.984905] PCI-DMA: Disabling AGP.
[    0.984962] PCI-DMA: aperture base @ bc000000 size 65536 KB
[    0.984962] PCI-DMA: using GART IOMMU.
[    0.984964] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.989440] amd_uncore: AMD NB counters detected
[    0.989559] LVT offset 0 assigned for vector 0x400
[    0.989606] perf: AMD IBS detected (0x000000ff)
[    0.989654] Scanning for low memory corruption every 60 seconds
[    0.990153] Initialise system trusted keyrings
[    0.990162] Key type blacklist registered
[    0.990213] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.991416] zbud: loaded
[    0.992683] Key type asymmetric registered
[    0.992683] Asymmetric key parser 'x509' registered
[    0.992705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.992758] io scheduler noop registered
[    0.992759] io scheduler deadline registered
[    0.992796] io scheduler cfq registered (default)
[    0.992796] io scheduler mq-deadline registered
[    0.992797] io scheduler kyber registered
[    0.992802] io scheduler bfq registered
[    0.993398] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.993399] vesafb: scrolling: redraw
[    0.993400] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.993409] vesafb: framebuffer at 0xd0000000, mapped to 0x000000003454d860, using 1216k, total 1216k
[    0.996325] Console: switching to colour frame buffer device 80x30
[    0.999144] fb0: VESA VGA frame buffer device
[    0.999202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.999209] ACPI: Power Button [PWRB]
[    0.999242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.999271] ACPI: Power Button [PWRF]
[    1.000014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.020700] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.021931] ledtrig-cpu: registered to indicate activity on CPUs
[    1.022146] NET: Registered protocol family 10
[    1.025375] Segment Routing with IPv6
[    1.025393] NET: Registered protocol family 17
[    1.025637] RAS: Correctable Errors collector initialized.
[    1.025793] microcode: CPU0: patch_level=0x0600081c
[    1.025797] microcode: CPU1: patch_level=0x0600081c
[    1.025800] microcode: CPU2: patch_level=0x0600081c
[    1.025804] microcode: CPU3: patch_level=0x0600081c
[    1.025812] microcode: CPU4: patch_level=0x0600081c
[    1.025818] microcode: CPU5: patch_level=0x0600081c
[    1.025854] microcode: Microcode Update Driver: v2.2.
[    1.025862] sched_clock: Marking stable (1025849979, 0)->(1126980768, -101130789)
[    1.026051] registered taskstats version 1
[    1.026056] Loading compiled-in X.509 certificates
[    1.026069] zswap: loaded using pool lzo/zbud
[    1.028473] Key type big_key registered
[    1.028671]   Magic number: 14:817:816
[    1.028705] hctosys: unable to open rtc device (rtc0)
[    1.030654] Freeing unused kernel memory: 1452K
[    1.030655] Write protecting the kernel read-only data: 16384k
[    1.031328] Freeing unused kernel memory: 2016K
[    1.032863] Freeing unused kernel memory: 724K
[    1.090575] SCSI subsystem initialized
[    1.092513] ACPI: bus type USB registered
[    1.092534] usbcore: registered new interface driver usbfs
[    1.092545] usbcore: registered new interface driver hub
[    1.092581] usbcore: registered new device driver usb
[    1.094739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.094868] libata version 3.00 loaded.
[    1.095095] ehci-pci: EHCI PCI platform driver
[    1.095107] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.095389] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.095396] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.095401] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.095412] ehci-pci 0000:00:12.2: debug port 1
[    1.095456] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeaff800
[    1.107554] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.107626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.107628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.107629] usb usb1: Product: EHCI Host Controller
[    1.107630] usb usb1: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd
[    1.107631] usb usb1: SerialNumber: 0000:00:12.2
[    1.107754] hub 1-0:1.0: USB hub found
[    1.107761] hub 1-0:1.0: 6 ports detected
[    1.108108] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.108112] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.108115] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.108124] ehci-pci 0000:00:13.2: debug port 1
[    1.108158] ehci-pci 0000:00:13.2: irq 19, io mem 0xfeaff400
[    1.111014] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.111053] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.111055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111056] usb usb2: Product: EHCI Host Controller
[    1.111057] usb usb2: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd
[    1.111058] usb usb2: SerialNumber: 0000:00:13.2
[    1.111159] hub 2-0:1.0: USB hub found
[    1.111165] hub 2-0:1.0: 6 ports detected
[    1.111646] ohci-pci: OHCI PCI platform driver
[    1.112720] scsi host0: pata_atiixp
[    1.112834] scsi host1: pata_atiixp
[    1.112864] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.112865] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.112922] ahci 0000:00:11.0: version 3.0
[    1.113128] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.113130] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.113583] scsi host2: ahci
[    1.113670] scsi host3: ahci
[    1.113756] scsi host4: ahci
[    1.117177] scsi host5: ahci
[    1.117225] ata3: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 22
[    1.117227] ata4: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 22
[    1.117229] ata5: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffe00 irq 22
[    1.117231] ata6: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffe80 irq 22
[    1.117432] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.117437] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.117463] ohci-pci 0000:00:12.0: irq 16, io mem 0xfeafe000
[    1.177485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.177487] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.177488] usb usb3: Product: OHCI PCI host controller
[    1.177489] usb usb3: Manufacturer: Linux 4.16.3-1-ARCH ohci_hcd
[    1.177490] usb usb3: SerialNumber: 0000:00:12.0
[    1.177646] hub 3-0:1.0: USB hub found
[    1.177654] hub 3-0:1.0: 3 ports detected
[    1.177928] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.177932] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.177949] ohci-pci 0000:00:12.1: irq 16, io mem 0xfeafd000
[    1.237483] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.237485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.237486] usb usb4: Product: OHCI PCI host controller
[    1.237487] usb usb4: Manufacturer: Linux 4.16.3-1-ARCH ohci_hcd
[    1.237487] usb usb4: SerialNumber: 0000:00:12.1
[    1.237637] hub 4-0:1.0: USB hub found
[    1.237645] hub 4-0:1.0: 3 ports detected
[    1.238001] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.238005] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.238029] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeafc000
[    1.297466] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.297468] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.297469] usb usb5: Product: OHCI PCI host controller
[    1.297470] usb usb5: Manufacturer: Linux 4.16.3-1-ARCH ohci_hcd
[    1.297471] usb usb5: SerialNumber: 0000:00:13.0
[    1.297660] hub 5-0:1.0: USB hub found
[    1.297668] hub 5-0:1.0: 3 ports detected
[    1.297922] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.297927] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.297942] ohci-pci 0000:00:13.1: irq 18, io mem 0xfeafb000
[    1.357470] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.357472] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.357473] usb usb6: Product: OHCI PCI host controller
[    1.357474] usb usb6: Manufacturer: Linux 4.16.3-1-ARCH ohci_hcd
[    1.357475] usb usb6: SerialNumber: 0000:00:13.1
[    1.357666] hub 6-0:1.0: USB hub found
[    1.357674] hub 6-0:1.0: 3 ports detected
[    1.357960] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.357969] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.357994] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeafa000
[    1.417434] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.417436] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.417437] usb usb7: Product: OHCI PCI host controller
[    1.417438] usb usb7: Manufacturer: Linux 4.16.3-1-ARCH ohci_hcd
[    1.417439] usb usb7: SerialNumber: 0000:00:14.5
[    1.417593] hub 7-0:1.0: USB hub found
[    1.417600] hub 7-0:1.0: 2 ports detected
[    1.430188] ata4: SATA link down (SStatus 0 SControl 300)
[    1.430348] ata3: SATA link down (SStatus 0 SControl 300)
[    1.533437] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    1.586770] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.586809] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.588601] ata6.00: ATAPI: ATAPI   iHAS124   W, HL05, max UDMA/100
[    1.590543] ata6.00: configured for UDMA/100
[    1.631774] ata5.00: ATA-7: MAXTOR STM3160215AS, 4.AAB, max UDMA/133
[    1.631779] ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.690075] ata5.00: configured for UDMA/133
[    1.690340] scsi 4:0:0:0: Direct-Access     ATA      MAXTOR STM316021 B    PQ: 0 ANSI: 5
[    1.691224] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   W      HL05 PQ: 0 ANSI: 5
[    1.691511] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.691521] sd 4:0:0:0: [sda] Write Protect is off
[    1.691523] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.691539] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733403] usb 3-1: New USB device found, idVendor=04d9, idProduct=1503
[    1.733405] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.733406] usb 3-1: Product: USB Keyboard
[    1.733407] usb 3-1: Manufacturer:  
[    1.737573] hidraw: raw HID events driver (C) Jiri Kosina
[    1.746837]  sda: sda1 < sda5 > sda2 sda3 sda4
[    1.747156] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.766776] usbcore: registered new interface driver usbhid
[    1.766777] usbhid: USB HID core driver
[    1.767577] input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:04D9:1503.0001/input/input2
[    1.769415] sr 5:0:0:0: [sr0] scsi3-mmc drive: 188x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.769417] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.769532] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.823592] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:12.0-1/input0
[    1.823790] input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:04D9:1503.0002/input/input3
[    1.880258] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:12.0-1/input1
[    1.946768] tsc: Refined TSC clocksource calibration: 3515.784 MHz
[    1.946792] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32ad8fc41cb, max_idle_ns: 440795333030 ns
[    1.946865] clocksource: Switched to clocksource tsc
[    2.416750] usb 3-2: new low-speed USB device number 3 using ohci-pci
[    2.600366] usb 3-2: New USB device found, idVendor=0000, idProduct=0538
[    2.600368] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.600369] usb 3-2: Product:  USB OPTICAL MOUSE
[    2.607783] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:0000:0538.0003/input/input4
[    2.607885] hid-generic 0003:0000:0538.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0
[    2.862832] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.236756] usb 3-3: new full-speed USB device number 4 using ohci-pci
[    3.428407] usb 3-3: New USB device found, idVendor=056a, idProduct=033b
[    3.428412] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.428415] usb 3-3: Product: Intuos PS
[    3.428418] usb 3-3: Manufacturer: Wacom Co.,Ltd.
[    3.438121] hid-generic 0003:056A:033B.0004: hiddev0,hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-3/input0
[    3.441558] hid-generic 0003:056A:033B.0005: hiddev1,hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-3/input1
[    3.445513] input: Wacom Co.,Ltd. Intuos PS as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.2/0003:056A:033B.0006/input/input5
[    3.445601] hid-generic 0003:056A:033B.0006: input,hidraw5: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-3/input2
[    4.418165] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.433586] systemd[1]: Detected architecture x86-64.
[    4.462156] systemd[1]: Set hostname to <mrgaturus-pc>.
[    4.512711] random: crng init done
[    5.995586] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.995623] systemd[1]: Reached target Login Prompts.
[    5.995667] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.995701] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.995737] systemd[1]: Listening on udev Control Socket.
[    5.995767] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.995775] systemd[1]: Reached target Remote File Systems.
[    6.217923] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    6.601114] systemd-journald[253]: Received request to flush runtime journal from PID 1
[    8.606925] acpi_cpufreq: overriding BIOS provided _PSD data
[    9.924404] ATK0110 ATK0110:00: Overriding interface detection
[    9.924829] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   10.032645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.079188] rtc_cmos 00:01: RTC can wake from S4
[   10.079313] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[   10.079340] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   10.095940] parport_pc 00:02: reported by Plug and Play ACPI
[   10.096029] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.229712] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20180105/utaddress-247)
[   10.229719] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20180105/utaddress-247)
[   10.229724] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20180105/utaddress-247)
[   10.229728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.282768] cryptd: max_cpu_qlen set to 1000
[   10.347376] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.415932] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   10.487350] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.487366] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.488373] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0x000000002fa78550, e0:3f:49:af:94:dc, XID 08000800 IRQ 24
[   10.488378] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.595235] mousedev: PS/2 mouse device common for all mice
[   10.688416] Linux agpgart interface v0.103
[   11.123632] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   11.123634] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[   11.147053] input: Wacom Intuos S 2 Pen as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:056A:033B.0004/input/input7
[   11.147145] wacom 0003:056A:033B.0004: hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-3/input0
[   11.147246] input: Wacom Intuos S 2 Pad as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:056A:033B.0005/input/input12
[   11.147328] wacom 0003:056A:033B.0005: hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:00:12.0-3/input1
[   11.213288] ppdev: user-space parallel port driver
[   11.298305] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   11.298373] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   11.298440] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   11.298499] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[   11.298557] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[   11.298616] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[   11.317134] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   11.365662] [drm] radeon kernel modesetting enabled.
[   11.365740] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[   11.365742] fb: switching to radeondrmfb from VESA VGA
[   11.365762] Console: switching to colour dummy device 80x25
[   11.366033] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x1682:0x7260 0x00).
[   11.366046] [drm] doorbell mmio base: 0xCF800000
[   11.366047] [drm] doorbell mmio size: 8388608
[   11.366077] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   11.366081] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
[   11.366892] ATOM BIOS: C58209
[   11.366962] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   11.366964] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[   11.366967] [drm] Detected VRAM RAM=1024M, BAR=256M
[   11.366968] [drm] RAM width 128bits DDR
[   11.367029] [TTM] Zone  kernel: Available graphics memory: 2012322 kiB
[   11.367029] [TTM] Initializing pool allocator
[   11.367033] [TTM] Initializing DMA pool allocator
[   11.367049] [drm] radeon: 1024M of VRAM memory ready
[   11.367050] [drm] radeon: 2048M of GTT memory ready.
[   11.367057] [drm] Loading bonaire Microcode
[   11.945815] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   11.945817] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.945825] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.945827] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.945829] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   11.945830] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.945832] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.945833] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.945834] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   11.963150] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[   11.963214] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[   11.963271] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[   11.963327] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[   11.963488] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[   12.033873] [drm] Internal thermal controller with fan control
[   12.033966] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[   12.041351] [drm] radeon: dpm initialized
[   12.073149] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[   12.091360] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[   12.091371] [drm] GART: num cpu pages 524288, num gpu pages 524288
[   12.093066] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[   12.093069] [drm] PCIE gen 2 link speeds already enabled
[   12.101475] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[   12.101589] radeon 0000:01:00.0: WB enabled
[   12.101600] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000808f44cc
[   12.101601] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x00000000ba9f2d76
[   12.101603] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x00000000cd5a1bb0
[   12.101604] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000009f0d05ed
[   12.101605] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x000000004a4f902a
[   12.101991] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x000000003791e938
[   12.102140] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x00000000be1c2940
[   12.102142] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x0000000018470d3f
[   12.102144] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.102144] [drm] Driver supports precise vblank timestamp query.
[   12.102181] radeon 0000:01:00.0: radeon: using MSI.
[   12.102207] [drm] radeon: irq initialized.
[   12.104013] [drm] ring test on 0 succeeded in 3 usecs
[   12.104083] [drm] ring test on 1 succeeded in 3 usecs
[   12.104098] [drm] ring test on 2 succeeded in 3 usecs
[   12.104243] [drm] ring test on 3 succeeded in 4 usecs
[   12.104249] [drm] ring test on 4 succeeded in 4 usecs
[   12.145100] AVX version of gcm_enc/dec engaged.
[   12.145102] AES CTR mode by8 optimization enabled
[   12.150298] [drm] ring test on 5 succeeded in 2 usecs
[   12.170322] [drm] UVD initialized successfully.
[   12.268475] microcode: CPU3: new patch_level=0x0600084f
[   12.274580] microcode: CPU1: new patch_level=0x0600084f
[   12.280635] microcode: CPU5: new patch_level=0x0600084f
[   12.280899] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[   12.280901] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
[   12.297790] [drm] ring test on 6 succeeded in 18 usecs
[   12.297803] [drm] ring test on 7 succeeded in 4 usecs
[   12.297803] [drm] VCE initialized successfully.
[   12.298617] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.298761] [drm] ib test on ring 1 succeeded in 0 usecs
[   12.298903] [drm] ib test on ring 2 succeeded in 0 usecs
[   12.299045] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.299192] [drm] ib test on ring 4 succeeded in 0 usecs
[   12.826852] [drm] ib test on ring 5 succeeded
[   12.847802] [drm] ib test on ring 6 succeeded
[   12.848550] [drm] ib test on ring 7 succeeded
[   12.849167] [drm] Radeon Display Connectors
[   12.849168] [drm] Connector 0:
[   12.849168] [drm]   DP-1
[   12.849168] [drm]   HPD2
[   12.849170] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[   12.849170] [drm]   Encoders:
[   12.849171] [drm]     DFP1: INTERNAL_UNIPHY2
[   12.849171] [drm] Connector 1:
[   12.849172] [drm]   HDMI-A-1
[   12.849172] [drm]   HPD3
[   12.849173] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[   12.849174] [drm]   Encoders:
[   12.849174] [drm]     DFP2: INTERNAL_UNIPHY2
[   12.849174] [drm] Connector 2:
[   12.849175] [drm]   DVI-D-1
[   12.849175] [drm]   HPD1
[   12.849176] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.849177] [drm]   Encoders:
[   12.849177] [drm]     DFP3: INTERNAL_UNIPHY1
[   12.849177] [drm] Connector 3:
[   12.849178] [drm]   DVI-I-1
[   12.849178] [drm]   HPD6
[   12.849179] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[   12.849180] [drm]   Encoders:
[   12.849180] [drm]     DFP4: INTERNAL_UNIPHY
[   12.849181] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.908703] [drm] fb mappable at 0xD0721000
[   12.908704] [drm] vram apper at 0xD0000000
[   12.908705] [drm] size 3145728
[   12.908705] [drm] fb depth is 24
[   12.908706] [drm]    pitch is 4096
[   12.908840] fbcon: radeondrmfb (fb0) is primary device
[   12.924291] Console: switching to colour frame buffer device 128x48
[   12.928365] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.969404] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   13.422726] 8021q: 802.1Q VLAN Support v1.8
[   13.538691] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.541895] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.564643] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   13.564645] cfg80211: failed to load regulatory.db
[   13.754485] kvm: Nested Virtualization enabled
[   13.754489] kvm: Nested Paging enabled
[   13.778387] [drm] amdgpu kernel modesetting enabled.
[   13.778720] MCE: In-kernel MCE decoding enabled.
[   13.803105] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.803106] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.871172] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.871174] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.920599] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.920600] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   13.960848] EDAC amd64: Node 0: DRAM ECC disabled.
[   13.960850] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   14.014427] EDAC amd64: Node 0: DRAM ECC disabled.
[   14.014430] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   14.080770] EDAC amd64: Node 0: DRAM ECC disabled.
[   14.080771] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   15.066226] r8169 0000:02:00.0 enp2s0: link down
[   15.066226] r8169 0000:02:00.0 enp2s0: link down
[   15.066291] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   16.932966] r8169 0000:02:00.0 enp2s0: link up
[   16.932979] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   24.033604] radeon_dp_aux_transfer_native: 74 callbacks suppressed
[   50.472347] fuse init (API version 7.26)
[   50.495805] radeon_dp_aux_transfer_native: 32 callbacks suppressed
[   55.883341] rfkill: input handler disabled

Offline

#2 2018-04-23 10:37:32

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 11,868

Re: drm.edid_firmware broken in kernel 4.15 and above

[   13.778387] [drm] amdgpu kernel modesetting enabled.

Module: radeon

.

posty lspci -k please.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.


(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#3 2018-04-23 16:26:36

mrgaturus
Member
Registered: 2018-04-23
Posts: 2

Re: drm.edid_firmware broken in kernel 4.15 and above

probably i need blacklist amdgpu module

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Bonaire XTX [Radeon R7 260X/360]
	Subsystem: XFX Pine Group Inc. Bonaire XTX [Radeon R7 260X/360]
	Kernel driver in use: radeon
	Kernel modules: radeon, amdgpu

Offline

Board footer

Powered by FluxBB