You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2018-05-01 21:16:21
- Shark
- Member
- From: /dev/zero
- Registered: 2011-02-28
- Posts: 686
AMD Radeon problems at boot
Hi,
so i got new laptop, HP 17-AK010NM A10-9620P.
On of the problem is that i got some weird messages during boot:
dmesg:
[ 0.000000] Linux version 4.16.5-1-ARCH (builduser@heftig-11182) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Thu Apr 26 16:53:40 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d945be7-c670-4400-8494-9c203ecbfcee rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bef8efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bef8f000-0x00000000bf18efff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf18f000-0x00000000bf88efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf88f000-0x00000000bfb8efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfb8f000-0x00000000bfbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d1000000-0x00000000d10fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000041f000000-0x000000043effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by INSYDE Corp.
[ 0.000000] efi: ESRT=0xbf1f1018 ACPI 2.0=0xbfbfe014 SMBIOS=0xbf1ef000 SMBIOS 3.0=0xbf1ed000 PROP=0xb377a358
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: HP HP Laptop 17-ak0xx/8347, BIOS F.06 11/02/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000bf1f1018 to 0x00000000bf1f1050.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x10c64f000, 0x10c64ffff] PGTABLE
[ 0.000000] BRK [0x10c650000, 0x10c650fff] PGTABLE
[ 0.000000] BRK [0x10c651000, 0x10c651fff] PGTABLE
[ 0.000000] BRK [0x10c652000, 0x10c652fff] PGTABLE
[ 0.000000] BRK [0x10c653000, 0x10c653fff] PGTABLE
[ 0.000000] BRK [0x10c654000, 0x10c654fff] PGTABLE
[ 0.000000] BRK [0x10c655000, 0x10c655fff] PGTABLE
[ 0.000000] BRK [0x10c656000, 0x10c656fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36a3b000-0x37514fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BFBFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000BFBC0188 0000CC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x00000000BFBF9000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x00000000BFBEA000 00AF6E (v01 HPQOEM SLIC-MPC 00040000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000BFB54000 000040
[ 0.000000] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x00000000BFBFB000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: BOOT 0x00000000BFBFA000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x00000000BFBF8000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x00000000BFBF7000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x00000000BFBF6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SPCR 0x00000000BFBF5000 000050 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: UEFI 0x00000000BFBE9000 000042 (v01 HPQOEM INSYDE 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFBE4000 004729 (v01 HPQOEM INSYDE 00001000 INTL 20130117)
[ 0.000000] ACPI: SSDT 0x00000000BFBE3000 0009F8 (v01 HPQOEM INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BFBDA000 00888F (v02 HPQOEM INSYDE 00000002 MSFT 04000000)
[ 0.000000] ACPI: IVRS 0x00000000BFBD9000 0000D0 (v02 HPQOEM INSYDE 00000001 HP 00000000)
[ 0.000000] ACPI: CRAT 0x00000000BFBD8000 000550 (v01 HPQOEM INSYDE 00000001 HP 00000001)
[ 0.000000] ACPI: VFCT 0x00000000BFBC8000 00FE84 (v01 HPQOEM INSYDE 00000001 HP 31504F47)
[ 0.000000] ACPI: SSDT 0x00000000BFBC7000 000692 (v01 HPQOEM INSYDE 00000001 INTL 20130117)
[ 0.000000] ACPI: SSDT 0x00000000BFBC5000 0015C5 (v01 HPQOEM INSYDE 00000001 INTL 20130117)
[ 0.000000] ACPI: SSDT 0x00000000BFBC4000 000B6C (v01 HPQOEM INSYDE 00000001 INTL 20130117)
[ 0.000000] ACPI: SSDT 0x00000000BFBC2000 00165E (v01 HPQOEM INSYDE 00000001 INTL 20130117)
[ 0.000000] ACPI: FPDT 0x00000000BFBC1000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 01000013)
[ 0.000000] ACPI: BGRT 0x00000000BFBBF000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41effc000-0x41effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000086fff]
[ 0.000000] node 0: [mem 0x0000000000088000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bef8efff]
[ 0.000000] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.000000] On node 0 totalpages: 4054830
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12159 pages used for memmap
[ 0.000000] DMA32 zone: 778128 pages, LIFO batch:31
[ 0.000000] Normal zone: 51136 pages used for memmap
[ 0.000000] Normal zone: 3272704 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] ACPI: SPCR: SPCR table version 1
[ 0.000000] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef8f000-0xbf18efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf18f000-0xbf88efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf88f000-0xbfb8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb8f000-0xbfbfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xd0ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xd10fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd1100000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xd1100000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x96/0x4dc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3991448
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d945be7-c670-4400-8494-9c203ecbfcee rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15812792K/16219320K available (10252K kernel code, 1264K rwdata, 3372K rodata, 1464K init, 640K bss, 406528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31750 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019999] tsc: Fast TSC calibration using PIT
[ 0.023333] tsc: Detected 2495.339 MHz processor
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f8068e97d, max_idle_ns: 440795257872 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.62 BogoMIPS (lpj=8317796)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.026747] Security Framework initialized
[ 0.026750] Yama: becoming mindful.
[ 0.033104] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035014] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035097] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.035158] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.035440] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.035448] CPU: Physical Processor ID: 0
[ 0.035449] CPU: Processor Core ID: 0
[ 0.035460] mce: CPU supports 7 MCE banks
[ 0.035468] LVT offset 1 assigned for vector 0xf9
[ 0.035477] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.035478] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.035480] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.035833] Freeing SMP alternatives memory: 24K
[ 0.039999] smpboot: CPU0: AMD A10-9620P RADEON R5, 10 COMPUTE CORES 4C+6G (family: 0x15, model: 0x65, stepping: 0x1)
[ 0.050099] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.050107] ... version: 0
[ 0.050108] ... bit width: 48
[ 0.050108] ... generic registers: 6
[ 0.050109] ... value mask: 0000ffffffffffff
[ 0.050110] ... max period: 00007fffffffffff
[ 0.050110] ... fixed-purpose events: 0
[ 0.050111] ... event mask: 000000000000003f
[ 0.056753] Hierarchical SRCU implementation.
[ 0.076860] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.083416] smp: Bringing up secondary CPUs ...
[ 0.113440] x86: Booting SMP configuration:
[ 0.113443] .... node #0, CPUs: #1 #2 #3
[ 0.175505] smp: Brought up 1 node, 4 CPUs
[ 0.175505] smpboot: Max logical packages: 1
[ 0.175505] smpboot: Total of 4 processors activated (19970.49 BogoMIPS)
[ 0.177034] devtmpfs: initialized
[ 0.177034] x86/mm: Memory block size: 128MB
[ 0.178122] PM: Registering ACPI NVS region [mem 0xbf88f000-0xbfb8efff] (3145728 bytes)
[ 0.178122] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.178122] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.178122] pinctrl core: initialized pinctrl subsystem
[ 0.178122] RTC time: 20:56:36, date: 05/02/18
[ 0.178122] NET: Registered protocol family 16
[ 0.178122] cpuidle: using governor ladder
[ 0.178122] cpuidle: using governor menu
[ 0.180031] Simple Boot Flag at 0x44 set to 0x1
[ 0.180065] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.180066] ACPI: bus type PCI registered
[ 0.180068] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.180173] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.180191] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.180191] PCI: Using configuration type 1 for base access
[ 0.181282] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.181282] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.181282] ACPI: Added _OSI(Module Device)
[ 0.181282] ACPI: Added _OSI(Processor Device)
[ 0.181282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.181282] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181282] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.192306] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202701] ACPI: EC: EC started
[ 0.202703] ACPI: EC: interrupt blocked
[ 0.229889] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[ 0.229891] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.229893] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[ 0.229893] ACPI: Interpreter enabled
[ 0.229918] ACPI: (supports S0 S3 S4 S5)
[ 0.229919] ACPI: Using IOAPIC for interrupt routing
[ 0.230106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.230358] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.237659] ACPI: Power Resource [P0U2] (off)
[ 0.237693] ACPI: Power Resource [P3U2] (off)
[ 0.238065] ACPI: Power Resource [P0U3] (off)
[ 0.238096] ACPI: Power Resource [P3U3] (off)
[ 0.239495] ACPI: Power Resource [P0ST] (on)
[ 0.239536] ACPI: Power Resource [P3ST] (on)
[ 0.239654] ACPI: Power Resource [P0SA] (off)
[ 0.239688] ACPI: Power Resource [P3SA] (off)
[ 0.240448] ACPI: Power Resource [P0SD] (off)
[ 0.240483] ACPI: Power Resource [P3SD] (off)
[ 0.244183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244190] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.244443] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.244445] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.244460] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.244752] PCI host bridge to bus 0000:00
[ 0.244754] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.244755] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.244756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.244757] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.244759] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.244760] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.244761] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.244762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.244763] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.244764] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.244765] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.244766] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.244767] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.244768] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.244769] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.244770] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff window]
[ 0.244771] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.244773] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.244780] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.244877] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[ 0.244984] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
[ 0.245002] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.245010] pci 0000:00:01.0: reg 0x18: [mem 0xd0800000-0xd0ffffff 64bit pref]
[ 0.245016] pci 0000:00:01.0: reg 0x20: [io 0x5000-0x50ff]
[ 0.245022] pci 0000:00:01.0: reg 0x24: [mem 0xd1500000-0xd153ffff]
[ 0.245027] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.245031] pci 0000:00:01.0: enabling Extended Tags
[ 0.245039] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.245070] pci 0000:00:01.0: supports D1 D2
[ 0.245071] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.245152] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.245167] pci 0000:00:01.1: reg 0x10: [mem 0xd1560000-0xd1563fff 64bit]
[ 0.245193] pci 0000:00:01.1: enabling Extended Tags
[ 0.245224] pci 0000:00:01.1: supports D1 D2
[ 0.245291] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.245377] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[ 0.245412] pci 0000:00:02.2: enabling Extended Tags
[ 0.245453] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.245535] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[ 0.245571] pci 0000:00:02.3: enabling Extended Tags
[ 0.245609] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.245727] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.245836] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
[ 0.245878] pci 0000:00:03.1: enabling Extended Tags
[ 0.245925] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.246033] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.246048] pci 0000:00:08.0: reg 0x10: [mem 0xd1540000-0xd155ffff 64bit pref]
[ 0.246054] pci 0000:00:08.0: reg 0x18: [mem 0xd1100000-0xd11fffff]
[ 0.246059] pci 0000:00:08.0: reg 0x1c: [mem 0xd1570000-0xd1570fff]
[ 0.246068] pci 0000:00:08.0: reg 0x24: [mem 0xd156a000-0xd156bfff]
[ 0.246168] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.246266] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.246278] pci 0000:00:09.2: reg 0x10: [mem 0xd1564000-0xd1567fff]
[ 0.246319] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.246424] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.246453] pci 0000:00:10.0: reg 0x10: [mem 0xd1568000-0xd1569fff 64bit]
[ 0.246630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.246715] pci 0000:00:11.0: [1022:7904] type 00 class 0x010601
[ 0.246733] pci 0000:00:11.0: reg 0x10: [io 0x5118-0x511f]
[ 0.246741] pci 0000:00:11.0: reg 0x14: [io 0x5124-0x5127]
[ 0.246749] pci 0000:00:11.0: reg 0x18: [io 0x5110-0x5117]
[ 0.246757] pci 0000:00:11.0: reg 0x1c: [io 0x5120-0x5123]
[ 0.246765] pci 0000:00:11.0: reg 0x20: [io 0x5100-0x510f]
[ 0.246773] pci 0000:00:11.0: reg 0x24: [mem 0xd156c000-0xd156c3ff]
[ 0.246809] pci 0000:00:11.0: PME# supported from D3hot
[ 0.246881] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.248171] pci 0000:00:12.0: reg 0x10: [mem 0xd156e000-0xd156e0ff]
[ 0.251468] pci 0000:00:12.0: supports D1 D2
[ 0.251469] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.251558] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.251699] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.251858] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
[ 0.251885] pci 0000:00:14.7: reg 0x10: [mem 0xd156d000-0xd156d0ff 64bit]
[ 0.251955] pci 0000:00:14.7: PME# supported from D3cold
[ 0.252041] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[ 0.252204] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[ 0.252295] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[ 0.252392] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[ 0.252478] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[ 0.252560] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[ 0.252706] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.252733] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.252758] pci 0000:01:00.0: reg 0x18: [mem 0xd1404000-0xd1404fff 64bit]
[ 0.252774] pci 0000:01:00.0: reg 0x20: [mem 0xd1400000-0xd1403fff 64bit]
[ 0.252861] pci 0000:01:00.0: supports D1 D2
[ 0.252862] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260053] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.260061] pci 0000:00:02.2: bridge window [io 0x4000-0x4fff]
[ 0.260065] pci 0000:00:02.2: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.260194] pci 0000:02:00.0: [10ec:d723] type 00 class 0x028000
[ 0.260230] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.260260] pci 0000:02:00.0: reg 0x18: [mem 0xd1300000-0xd130ffff 64bit]
[ 0.260390] pci 0000:02:00.0: supports D1 D2
[ 0.260391] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.270051] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.270059] pci 0000:00:02.3: bridge window [io 0x3000-0x3fff]
[ 0.270063] pci 0000:00:02.3: bridge window [mem 0xd1300000-0xd13fffff]
[ 0.270225] pci 0000:03:00.0: [1002:6900] type 00 class 0x038000
[ 0.270274] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.270294] pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.270307] pci 0000:03:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.270320] pci 0000:03:00.0: reg 0x24: [mem 0xd1200000-0xd123ffff]
[ 0.270333] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.270345] pci 0000:03:00.0: enabling Extended Tags
[ 0.270492] pci 0000:03:00.0: supports D1 D2
[ 0.280056] pci 0000:00:03.1: PCI bridge to [bus 03]
[ 0.280064] pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
[ 0.280068] pci 0000:00:03.1: bridge window [mem 0xd1200000-0xd12fffff]
[ 0.280074] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.280925] ACPI: IRQ 7 override to edge, high
[ 0.281070] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281303] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281378] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281438] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281498] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.281557] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.282078] ACPI: EC: interrupt unblocked
[ 0.282078] ACPI: EC: event unblocked
[ 0.282078] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.282078] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.282078] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.282078] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.282078] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.282078] vgaarb: loaded
[ 0.282294] EDAC MC: Ver: 3.0.0
[ 0.283386] Registered efivars operations
[ 0.313425] PCI: Using ACPI for IRQ routing
[ 0.314553] PCI: pci_cache_line_size set to 64 bytes
[ 0.314622] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
[ 0.314624] e820: reserve RAM buffer [mem 0xbef8f000-0xbfffffff]
[ 0.314625] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
[ 0.314626] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 0.316676] NetLabel: Initializing
[ 0.316676] NetLabel: domain hash size = 128
[ 0.316676] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.316676] NetLabel: unlabeled traffic allowed by default
[ 0.316704] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316708] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.318718] clocksource: Switched to clocksource tsc-early
[ 0.331100] VFS: Disk quotas dquot_6.6.0
[ 0.331123] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.331231] pnp: PnP ACPI init
[ 0.331526] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.331529] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.331531] system 00:00: [mem 0xd1000000-0xd10fffff] has been reserved
[ 0.331537] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.331787] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.331838] system 00:02: [io 0x0400-0x04cf] has been reserved
[ 0.331839] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.331841] system 00:02: [io 0x04d6] has been reserved
[ 0.331842] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.331843] system 00:02: [io 0x0c14] has been reserved
[ 0.331845] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.331846] system 00:02: [io 0x0c6c] has been reserved
[ 0.331847] system 00:02: [io 0x0c6f] has been reserved
[ 0.331848] system 00:02: [io 0x0cd0-0x0cdb] has been reserved
[ 0.331852] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.331924] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.331926] system 00:03: [mem 0xff800000-0xffffffff] has been reserved
[ 0.331929] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.332006] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.332031] pnp 00:05: Plug and Play ACPI device, IDs ETD0727 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.332674] pnp: PnP ACPI: found 6 devices
[ 0.339444] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.339452] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.339455] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.339488] pci 0000:00:01.0: BAR 6: assigned [mem 0xd0200000-0xd021ffff pref]
[ 0.339491] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.339494] pci 0000:00:02.2: bridge window [io 0x4000-0x4fff]
[ 0.339497] pci 0000:00:02.2: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.339504] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.339506] pci 0000:00:02.3: bridge window [io 0x3000-0x3fff]
[ 0.339509] pci 0000:00:02.3: bridge window [mem 0xd1300000-0xd13fffff]
[ 0.339516] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1240000-0xd125ffff pref]
[ 0.339517] pci 0000:00:03.1: PCI bridge to [bus 03]
[ 0.339519] pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
[ 0.339522] pci 0000:00:03.1: bridge window [mem 0xd1200000-0xd12fffff]
[ 0.339525] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.339531] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.339532] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.339533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.339535] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.339536] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.339537] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.339538] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.339539] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.339540] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.339541] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.339542] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.339543] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.339544] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.339545] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.339546] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.339547] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xf7ffffff window]
[ 0.339548] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
[ 0.339550] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.339551] pci_bus 0000:01: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.339553] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.339554] pci_bus 0000:02: resource 1 [mem 0xd1300000-0xd13fffff]
[ 0.339555] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.339556] pci_bus 0000:03: resource 1 [mem 0xd1200000-0xd12fffff]
[ 0.339557] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.339664] NET: Registered protocol family 2
[ 0.339913] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.339980] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.340221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.340446] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.340518] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.340597] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.340827] NET: Registered protocol family 1
[ 0.340854] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.370108] PCI: CLS 64 bytes, default 64
[ 0.370166] Unpacking initramfs...
[ 0.548853] Freeing initrd memory: 11112K
[ 0.548873] AMD-Vi: IOMMU performance counters supported
[ 0.549048] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.549049] pci 0000:00:00.2: PCI INT A: not connected
[ 0.549293] iommu: Adding device 0000:00:01.0 to group 0
[ 0.549350] iommu: Using direct mapping for device 0000:00:01.0
[ 0.549382] iommu: Adding device 0000:00:01.1 to group 0
[ 0.549428] iommu: Adding device 0000:00:02.0 to group 1
[ 0.549442] iommu: Adding device 0000:00:02.2 to group 1
[ 0.549459] iommu: Adding device 0000:00:02.3 to group 1
[ 0.549528] iommu: Adding device 0000:00:03.0 to group 2
[ 0.549542] iommu: Adding device 0000:00:03.1 to group 2
[ 0.549597] iommu: Adding device 0000:00:08.0 to group 3
[ 0.549661] iommu: Adding device 0000:00:09.0 to group 4
[ 0.549677] iommu: Adding device 0000:00:09.2 to group 4
[ 0.549826] iommu: Adding device 0000:00:10.0 to group 5
[ 0.549900] iommu: Adding device 0000:00:11.0 to group 6
[ 0.549963] iommu: Adding device 0000:00:12.0 to group 7
[ 0.550049] iommu: Adding device 0000:00:14.0 to group 8
[ 0.550068] iommu: Adding device 0000:00:14.3 to group 8
[ 0.550088] iommu: Adding device 0000:00:14.7 to group 8
[ 0.550190] iommu: Adding device 0000:00:18.0 to group 9
[ 0.550207] iommu: Adding device 0000:00:18.1 to group 9
[ 0.550261] iommu: Adding device 0000:00:18.2 to group 9
[ 0.550275] iommu: Adding device 0000:00:18.3 to group 9
[ 0.550288] iommu: Adding device 0000:00:18.4 to group 9
[ 0.550304] iommu: Adding device 0000:00:18.5 to group 9
[ 0.550319] iommu: Adding device 0000:01:00.0 to group 1
[ 0.550336] iommu: Adding device 0000:02:00.0 to group 1
[ 0.550374] iommu: Adding device 0000:03:00.0 to group 2
[ 0.550909] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.550911] AMD-Vi: Extended features (0x37ef22294ada):
[ 0.550912] PPR NX GT IA GA PC GA_vAPIC
[ 0.550916] AMD-Vi: Interrupt remapping enabled
[ 0.550916] AMD-Vi: virtual APIC enabled
[ 0.551075] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.552564] amd_uncore: AMD NB counters detected
[ 0.552836] LVT offset 0 assigned for vector 0x400
[ 0.552885] perf: AMD IBS detected (0x000007ff)
[ 0.552890] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.552962] Scanning for low memory corruption every 60 seconds
[ 0.553657] Initialise system trusted keyrings
[ 0.553673] Key type blacklist registered
[ 0.553881] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.555196] zbud: loaded
[ 0.557386] Key type asymmetric registered
[ 0.557388] Asymmetric key parser 'x509' registered
[ 0.557423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.557472] io scheduler noop registered
[ 0.557473] io scheduler deadline registered
[ 0.557529] io scheduler cfq registered (default)
[ 0.557530] io scheduler mq-deadline registered
[ 0.557531] io scheduler kyber registered
[ 0.557540] io scheduler bfq registered
[ 0.558408] pcieport 0000:00:02.2: Signaling PME with IRQ 26
[ 0.558427] pcieport 0000:00:02.3: Signaling PME with IRQ 27
[ 0.558445] pcieport 0000:00:03.1: Signaling PME with IRQ 29
[ 0.558509] pciehp 0000:00:03.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 0.558573] pciehp 0000:00:03.1:pcie004: Slot(0): Card present
[ 0.558684] efifb: probing for efifb
[ 0.558707] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[ 0.558708] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.558708] efifb: scrolling: redraw
[ 0.558710] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.561639] Console: switching to colour frame buffer device 200x56
[ 0.563983] fb0: EFI VGA frame buffer device
[ 0.564081] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.564090] ACPI: Power Button [PWRB]
[ 0.564178] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.564188] ACPI: Lid Switch [LID0]
[ 0.564231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.564355] ACPI: Power Button [PWRF]
[ 0.564453] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.564867] acpi device:00: registered as cooling_device0
[ 0.564906] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.564943] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 0.565086] acpi device:08: registered as cooling_device1
[ 0.565119] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:01/input/input4
[ 0.568609] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.568612] ACPI: Thermal Zone [TZS0] (33 C)
[ 0.568958] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.568959] ACPI: Thermal Zone [TZS1] (45 C)
[ 0.569380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.571053] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.571375] NET: Registered protocol family 10
[ 0.576274] Segment Routing with IPv6
[ 0.576310] NET: Registered protocol family 17
[ 0.576617] RAS: Correctable Errors collector initialized.
[ 0.576765] microcode: CPU0: patch_level=0x06006118
[ 0.576773] microcode: CPU1: patch_level=0x06006118
[ 0.576778] microcode: CPU2: patch_level=0x06006118
[ 0.576784] microcode: CPU3: patch_level=0x06006118
[ 0.576846] microcode: Microcode Update Driver: v2.2.
[ 0.576862] sched_clock: Marking stable (576840064, 0)->(667501072, -90661008)
[ 0.577092] registered taskstats version 1
[ 0.577100] Loading compiled-in X.509 certificates
[ 0.577122] zswap: loaded using pool lzo/zbud
[ 0.581742] Key type big_key registered
[ 0.582129] Magic number: 2:157:952
[ 0.582198] tty tty9: hash matches
[ 0.582258] memory memory5: hash matches
[ 0.582263] hctosys: unable to open rtc device (rtc0)
[ 0.584872] Freeing unused kernel memory: 1464K
[ 0.584874] Write protecting the kernel read-only data: 16384k
[ 0.585831] Freeing unused kernel memory: 2016K
[ 0.587714] Freeing unused kernel memory: 724K
[ 0.647353] Linux agpgart interface v0.103
[ 0.679171] [drm] radeon kernel modesetting enabled.
[ 0.679207] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 0.680314] ATPX version 1, functions 0x00000003
[ 0.739992] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.745993] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.746064] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.751392] SCSI subsystem initialized
[ 0.753698] ACPI: bus type USB registered
[ 0.753725] usbcore: registered new interface driver usbfs
[ 0.753738] usbcore: registered new interface driver hub
[ 0.753777] usbcore: registered new device driver usb
[ 0.754095] sdhci: Secure Digital Host Controller Interface driver
[ 0.754097] sdhci: Copyright(c) Pierre Ossman
[ 0.758135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758523] libata version 3.00 loaded.
[ 0.761098] ehci-pci: EHCI PCI platform driver
[ 0.761374] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 0.761382] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.761397] ehci-pci 0000:00:12.0: debug port 2
[ 0.761461] ehci-pci 0000:00:12.0: irq 18, io mem 0xd156e000
[ 0.776408] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 0.776520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.776522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776524] usb usb1: Product: EHCI Host Controller
[ 0.776525] usb usb1: Manufacturer: Linux 4.16.5-1-ARCH ehci_hcd
[ 0.776527] usb usb1: SerialNumber: 0000:00:12.0
[ 0.776723] hub 1-0:1.0: USB hub found
[ 0.776730] hub 1-0:1.0: 2 ports detected
[ 0.776909] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
[ 0.777334] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 0.777640] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.777651] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.781718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.882719] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 0.883019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.883020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.883021] usb usb2: Product: xHCI Host Controller
[ 0.883022] usb usb2: Manufacturer: Linux 4.16.5-1-ARCH xhci-hcd
[ 0.883023] usb usb2: SerialNumber: 0000:00:10.0
[ 0.883250] hub 2-0:1.0: USB hub found
[ 0.883261] hub 2-0:1.0: 4 ports detected
[ 0.883533] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.883537] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.889626] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.889646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.889647] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.889648] usb usb3: Product: xHCI Host Controller
[ 0.889649] usb usb3: Manufacturer: Linux 4.16.5-1-ARCH xhci-hcd
[ 0.889650] usb usb3: SerialNumber: 0000:00:10.0
[ 0.889819] hub 3-0:1.0: USB hub found
[ 0.889830] hub 3-0:1.0: 4 ports detected
[ 0.890088] ahci 0000:00:11.0: version 3.0
[ 0.890357] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.890360] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 0.890776] scsi host0: ahci
[ 0.890873] ata1: SATA max UDMA/133 abar m1024@0xd156c000 port 0xd156c100 irq 19
[ 1.100187] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.206870] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.247721] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[ 1.247724] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.249289] hub 1-1:1.0: USB hub found
[ 1.250097] hub 1-1:1.0: 4 ports detected
[ 1.360268] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.361439] ata1.00: ATA-9: SanDisk SD8SN8U-256G-1006, X4120006, max UDMA/133
[ 1.361442] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.364260] ata1.00: configured for UDMA/133
[ 1.364865] scsi 0:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
[ 1.370290] usb 2-1: New USB device found, idVendor=05c8, idProduct=0233
[ 1.370304] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.370305] usb 2-1: Product: HP Webcam
[ 1.370307] usb 2-1: Manufacturer: Generic
[ 1.370308] usb 2-1: SerialNumber: 200901010001
[ 1.370830] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.370832] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.370863] sd 0:0:0:0: [sda] Write Protect is off
[ 1.370865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.370895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.374745] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.375678] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.465888] random: fast init done
[ 1.470529] usb 3-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.490752] usb 3-4: New USB device found, idVendor=152d, idProduct=0578
[ 1.490756] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.490757] usb 3-4: Product: USB to ATA/ATAPI Bridge
[ 1.490759] usb 3-4: Manufacturer: JMicron
[ 1.490760] usb 3-4: SerialNumber: 0123456789ABCDEF
[ 1.494213] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 1.494346] usb-storage 3-4:1.0: Quirks match for vid 152d pid 0578: 1000000
[ 1.494387] scsi host1: usb-storage 3-4:1.0
[ 1.494477] usbcore: registered new interface driver usb-storage
[ 1.495193] usbcore: registered new interface driver uas
[ 1.495378] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.550033] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.573356] tsc: Refined TSC clocksource calibration: 2495.317 MHz
[ 1.573363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7f206bf1, max_idle_ns: 440795322908 ns
[ 1.573389] clocksource: Switched to clocksource tsc
[ 1.610043] usb 2-2: new low-speed USB device number 3 using xhci_hcd
[ 1.623367] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 1.640408] systemd[1]: Detected architecture x86-64.
[ 1.642972] systemd[1]: Set hostname to <saso-laptop>.
[ 1.667982] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=b009
[ 1.667986] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.667988] usb 1-1.1: Product: 802.11n WLAN Adapter
[ 1.667989] usb 1-1.1: Manufacturer: Realtek
[ 1.667990] usb 1-1.1: SerialNumber: 00e04c000001
[ 1.731566] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.731660] systemd[1]: Listening on udev Control Socket.
[ 1.731806] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.731927] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.735507] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.735611] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.735635] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.735754] systemd[1]: Listening on Journal Socket.
[ 1.736184] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.737189] systemd[1]: Created slice User and Session Slice.
[ 1.737253] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.738388] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.738422] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.738569] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.738829] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.740490] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.740963] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.757314] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 1.820649] systemd-journald[224]: Received request to flush runtime journal from PID 1
[ 1.908937] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.920040] amd_gpio AMD0030:00: Failed to get gpio IRQ: -22
[ 1.920181] amd_gpio: probe of AMD0030:00 failed with error -22
[ 1.921285] input: HP Wireless hotkeys as /devices/virtual/input/input7
[ 1.927447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.969233] cmi: probe of SMB0001:00 failed with error -5
[ 1.969540] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[ 1.970118] rtc_cmos 00:01: RTC can wake from S4
[ 1.970271] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.970313] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.972418] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.972447] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found
[ 1.974811] ACPI: Battery Slot [BAT0] (battery present)
[ 1.975917] ACPI: AC Adapter [ADP1] (on-line)
[ 2.003712] usb 2-2: New USB device found, idVendor=08c5, idProduct=00cb
[ 2.003716] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.003718] usb 2-2: Product: 2.4G RX
[ 2.003719] usb 2-2: Manufacturer: DaKai
[ 2.008940] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.008943] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.010758] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 2.010870] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
[ 2.010912] sp5100-tco: probe of sp5100-tco failed with error -16
[ 2.023935] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.023955] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.042106] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0x (ptrval), ac:e2:d3:0f:be:e9, XID 14100800 IRQ 36
[ 2.042110] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.046374] media: Linux media interface: v0.10
[ 2.047640] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 2.066271] cryptd: max_cpu_qlen set to 1000
[ 2.078528] AVX2 version of gcm_enc/dec engaged.
[ 2.078531] AES CTR mode by8 optimization enabled
[ 2.133235] Linux video capture interface: v2.00
[ 2.138548] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 2.162189] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.164200] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 2.168702] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.168706] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.168708] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.168709] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.168711] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.168713] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 2.168714] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 2.184910] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.185881] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.2/sound/card1/input11
[ 2.186110] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input12
[ 2.186220] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input13
[ 2.187186] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.187189] cfg80211: failed to load regulatory.db
[ 2.193160] Bluetooth: Core ver 2.22
[ 2.193184] NET: Registered protocol family 31
[ 2.193185] Bluetooth: HCI device and connection manager initialized
[ 2.193190] Bluetooth: HCI socket layer initialized
[ 2.193193] Bluetooth: L2CAP socket layer initialized
[ 2.193199] Bluetooth: SCO socket layer initialized
[ 2.239125] [drm] amdgpu kernel modesetting enabled.
[ 2.239160] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 2.251166] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[ 2.256792] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:0233)
[ 2.256938] ATPX version 1, functions 0x00000003
[ 2.256958] usbcore: registered new interface driver btusb
[ 2.263590] uvcvideo 2-1:1.0: Entity type for entity Extension 7 was not initialized!
[ 2.263594] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.263596] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.263598] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.263684] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input14
[ 2.263787] usbcore: registered new interface driver uvcvideo
[ 2.263789] USB Video Class driver (1.1.1)
[ 2.267814] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.269680] Bluetooth: hci0: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
[ 2.269684] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 2.270125] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 2.270128] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 2.271689] Bluetooth: hci0: rom_version status=0 version=2
[ 2.271695] Bluetooth: hci0: didn't find patch for chip id 2
[ 2.274503] ntfs: volume version 3.1.
[ 2.274508] ntfs: (device sda6): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
[ 2.306509] Parsing CRAT table with 1 nodes
[ 2.306515] Creating topology SYSFS entries
[ 2.306542] Topology: Add APU node [0x0:0x0]
[ 2.306543] Finished initializing topology
[ 2.306568] kfd kfd: Initialized module
[ 2.315915] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 2.315919] fb: switching to amdgpudrmfb from EFI VGA
[ 2.315947] Console: switching to colour dummy device 80x25
[ 2.316497] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x103C:0x8347 0xCA).
[ 2.317103] [drm] register mmio base: 0xD1500000
[ 2.317106] [drm] register mmio size: 262144
[ 2.318238] [drm] UVD is enabled in physical mode
[ 2.318243] [drm] VCE enabled in physical mode
[ 2.318270] ATOM BIOS: 113-C75100-031
[ 2.318316] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 2.318325] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 2.318327] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 2.318342] [drm] Detected VRAM RAM=512M, BAR=512M
[ 2.318343] [drm] RAM width 128bits UNKNOWN
[ 2.322154] [TTM] Zone kernel: Available graphics memory: 7972874 kiB
[ 2.322158] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.322159] [TTM] Initializing pool allocator
[ 2.322164] [TTM] Initializing DMA pool allocator
[ 2.322212] [drm] amdgpu: 512M of VRAM memory ready
[ 2.322214] [drm] amdgpu: 3072M of GTT memory ready.
[ 2.322231] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.322348] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[ 2.331755] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 2.331761] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[ 2.350761] r8169 0000:01:00.0 eno1: renamed from eth0
[ 2.358790] rtlwifi: loading out-of-tree module taints kernel.
[ 2.377512] [drm] Found UVD firmware Version: 1.87 Family ID: 11
[ 2.377605] [drm] UVD ENC is disabled
[ 2.378342] kvm: disabled by bios
[ 2.382281] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 2.386200] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.393258] [drm] DM_PPLIB: values for Engine clock
[ 2.393262] [drm] DM_PPLIB: 30000
[ 2.393263] [drm] DM_PPLIB: 48000
[ 2.393263] [drm] DM_PPLIB: 53334
[ 2.393264] [drm] DM_PPLIB: 57600
[ 2.393265] [drm] DM_PPLIB: 62609
[ 2.393265] [drm] DM_PPLIB: 68572
[ 2.393266] [drm] DM_PPLIB: 72000
[ 2.393266] [drm] DM_PPLIB: 75790
[ 2.393267] [drm] DM_PPLIB: Validation clocks:
[ 2.393268] [drm] DM_PPLIB: engine_max_clock: 75790
[ 2.393269] [drm] DM_PPLIB: memory_max_clock: 93300
[ 2.393269] [drm] DM_PPLIB: level : 0
[ 2.393271] [drm] DM_PPLIB: values for Display clock
[ 2.393272] [drm] DM_PPLIB: 30000
[ 2.393273] [drm] DM_PPLIB: 40000
[ 2.393273] [drm] DM_PPLIB: 49656
[ 2.393274] [drm] DM_PPLIB: 62609
[ 2.393274] [drm] DM_PPLIB: 68572
[ 2.393275] [drm] DM_PPLIB: 75790
[ 2.393276] [drm] DM_PPLIB: 80000
[ 2.393276] [drm] DM_PPLIB: 84706
[ 2.393277] [drm] DM_PPLIB: Validation clocks:
[ 2.393278] [drm] DM_PPLIB: engine_max_clock: 75790
[ 2.393278] [drm] DM_PPLIB: memory_max_clock: 93300
[ 2.393279] [drm] DM_PPLIB: level : 0
[ 2.393280] [drm] DM_PPLIB: values for Memory clock
[ 2.393281] [drm] DM_PPLIB: 66700
[ 2.393281] [drm] DM_PPLIB: 93300
[ 2.393282] [drm] DM_PPLIB: Validation clocks:
[ 2.393282] [drm] DM_PPLIB: engine_max_clock: 75790
[ 2.393283] [drm] DM_PPLIB: memory_max_clock: 93300
[ 2.393283] [drm] DM_PPLIB: level : 0
[ 2.393438] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[ 2.415066] MCE: In-kernel MCE decoding enabled.
[ 2.416373] kvm: disabled by bios
[ 2.423734] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.423737] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.460223] usbcore: registered new interface driver usbhid
[ 2.460225] usbhid: USB HID core driver
[ 2.475994] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.475997] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.478813] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:08C5:00CB.0001/input/input16
[ 2.509284] scsi 1:0:0:0: CD-ROM hp DVDRW GUE1N UE00 PQ: 0 ANSI: 0
[ 2.532176] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.532268] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.533294] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.533749] rtl8723de: Using firmware rtlwifi/rtl8723defw.bin
[ 2.535079] hid-generic 0003:08C5:00CB.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:10.0-2/input0
[ 2.535753] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:08C5:00CB.0002/input/input17
[ 2.544374] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.544777] rtlwifi: rtlwifi: wireless switch is on
[ 2.547080] rtl8723de 0000:02:00.0 wlo1: renamed from wlan0
[ 2.579341] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x6d4f02)
[ 2.589532] psmouse serio1: elantech: Synaptics capabilities query result 0x71, 0x1a, 0x0b.
[ 2.590435] hid-generic 0003:08C5:00CB.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:10.0-2/input1
[ 2.598610] mousedev: PS/2 mouse device common for all mice
[ 2.600876] psmouse serio1: elantech: Elan sample query result 04, 4e, 97
[ 2.655327] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 2.730452] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 2.731116] random: crng init done
[ 2.749537] r8169 0000:01:00.0 eno1: link down
[ 2.749636] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 2.762540] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3.011047] hp_wmi: query 0xd returned error 0x5
[ 3.011182] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 3.305423] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3.420126] [drm:hwss_wait_for_blank_complete [amdgpu]] *ERROR* DC: failed to blank crtc!
[ 3.420159] [drm] Display Core initialized with v3.1.27!
[ 3.425842] [drm] SADs count is: -2, don't need to read it
[ 3.426284] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.426285] [drm] Driver supports precise vblank timestamp query.
[ 3.749461] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3.826833] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 4.454970] [drm] UVD initialized successfully.
[ 4.656276] [drm] VCE initialized successfully.
[ 4.660422] kfd kfd: Allocated 3969056 bytes on gart
[ 4.660441] Topology: Add APU node [0x9874:0x1002]
[ 4.660614] kfd kfd: added device 1002:9874
[ 4.662762] [drm] fb mappable at 0x41F618000
[ 4.662764] [drm] vram apper at 0x41F000000
[ 4.662765] [drm] size 5787648
[ 4.662765] [drm] fb depth is 24
[ 4.662766] [drm] pitch is 6400
[ 4.663319] fbcon: amdgpudrmfb (fb0) is primary device
[ 4.704207] Console: switching to colour frame buffer device 200x56
[ 4.723129] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 4.744410] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:00:01.0 on minor 0
[ 4.744546] amdgpu 0000:03:00.0: enabling device (0002 -> 0003)
[ 4.744890] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x103C:0x8347 0x83).
[ 4.744910] [drm] register mmio base: 0xD1200000
[ 4.744911] [drm] register mmio size: 262144
[ 4.744962] [drm] probing gen 2 caps for device 1022:157c = 733c83/e
[ 4.744964] [drm] probing mlw for device 1022:157c = 733c83
[ 4.745355] vga_switcheroo: enabled
[ 4.823394] ATOM BIOS: SWBRT20367.001
[ 4.823417] [drm] GPU posting now...
[ 4.828611] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 4.835449] amdgpu 0000:03:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 4.835452] amdgpu 0000:03:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[ 4.835467] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 4.835469] [drm] RAM width 64bits DDR3
[ 4.835507] [drm] amdgpu: 2048M of VRAM memory ready
[ 4.835510] [drm] amdgpu: 3072M of GTT memory ready.
[ 4.835532] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 4.836476] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[ 4.836616] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.836616] [drm] Driver supports precise vblank timestamp query.
[ 4.875395] amdgpu: [powerplay] can't get the mac of 5
[ 4.887886] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:03:00.0 on minor 1
[ 10.510419] amdgpu: [powerplay] VI should always have 2 performance levels
[ 10.594715] amdgpu 0000:03:00.0: GPU pci config reset
[ 12.659214] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 43.003981] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 43.459737] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 44.010522] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 48.896755] wlo1: authenticate with c0:7c:d1:aa:63:aa
[ 48.906933] wlo1: send auth to c0:7c:d1:aa:63:aa (try 1/3)
[ 48.911026] wlo1: authenticated
[ 48.913386] wlo1: associate with c0:7c:d1:aa:63:aa (try 1/3)
[ 48.918763] wlo1: RX AssocResp from c0:7c:d1:aa:63:aa (capab=0x1411 status=0 aid=2)
[ 49.197479] wlo1: associated
[ 49.868933] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 441.944743] fuse init (API version 7.26)Despite the errors i can boot into the system and everything works. Can you please tell us what are this errors, like:
[ 2.378342] kvm: disabled by bios
[ 1.920040] amd_gpio AMD0030:00: Failed to get gpio IRQ: -22
[ 2.010870] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
[ 2.393438] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
and many others.
My AMD specs:
AMD Radeon™ 530
I installed xf86-video-ati and add radeon module to mkinitcpio.conf.
Thank you.
Last edited by Shark (2018-05-01 21:16:48)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
#2 2018-05-01 21:35:47
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,960
Re: AMD Radeon problems at boot
Choose one topic per thread. Long threads are typically discouraged in the technical issue subforums.
KVM, sp5100-tco watchdog timer and amdgpu that appears to be three unrelated issues.
Shark wrote:
I installed xf86-video-ati and add radeon module to mkinitcpio.conf.
Why when the module in use is amdgpu not radeon?
Edit:
kvm: disabled by biosIs the message not self explanatory?
sp5100-tco sp5100-tco: I/O address 0x0cd6 already in useYou did not find any relevant search engine results for the above string?
Last edited by loqs (2018-05-02 00:58:47)
Offline
#3 2018-05-02 05:10:22
- Shark
- Member
- From: /dev/zero
- Registered: 2011-02-28
- Posts: 686
Re: AMD Radeon problems at boot
Hey,
sorry for that, coming back to Arch after several years 
Also, i thought it would be best to wrap this around in one post because it is about messages that appears in boot. I have several other problems as well which i will address them in a separate post.
I bliacklisted kvm and sp5100-tco but i still got messages. I was searching around internet but all i got was blacklisting and some patching of the kernel (i woul like to avoid the latter).
Any idea?
Thanks.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
#4 2018-05-02 11:44:06
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,960
Re: AMD Radeon problems at boot
The kvm message is informing you of exactly what it states in the message. As kvm is not available due to being disabled by the firmware the kvm module would not be loaded so blacklisting it would not make any difference.
How did you blacklist the sp5100-tco module and was the message related to it the same?
Offline
#5 2018-05-02 17:07:15
- Shark
- Member
- From: /dev/zero
- Registered: 2011-02-28
- Posts: 686
Re: AMD Radeon problems at boot
Ok, so i can ignore kvm message.
I checked once more and module to be blacklisted was mistyped. I correct it and now is not loaded at boot time.
For AMD errors i will try with installing kernel 4.17 with AMD patches. I will report how it wil go.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
#6 2018-05-02 17:24:02
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,960
Re: AMD Radeon problems at boot
Do you mean additional patches on top of 4.17 or commits included in 4.17 for AMD related messages. If there is no functionality impact I would ignore the messages.
If 4.17-rc3 does not help you try one of the branches from https://cgit.freedesktop.org/~agd5f/linux/
Offline
#7 2018-05-02 17:43:01
- Shark
- Member
- From: /dev/zero
- Registered: 2011-02-28
- Posts: 686
Re: AMD Radeon problems at boot
As far as i can see there is no performance issues, some DRM errors and Failed to get gpio IRQ.
I am comiling this kernel, it's quite big
https://aur.archlinux.org/packages/linu … -next-git/
I will look into your link as well, thanks for that.
P.S. - not quite relate thing - If this helps next thing i am going after is to try to figure out why there is battery drainage after laptop is shut down from Linux, but no battery drainage if laptop is shutdown from windows. I already opened a separate post about this:
https://bbs.archlinux.org/viewtopic.php?id=236722
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
#8 2018-05-02 17:50:20
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,960
Re: AMD Radeon problems at boot
That AUR PKGBUILD is for the amd-staging-drm-next branch of the tree I mentioned. Although the pkgver displays 4.17 it is 4.16-rc7 with AMD DRM tree updates targeting 4.17+
Edit:
I would suggest Makepkg#Parallel_compilation to reduce build time.
Last edited by loqs (2018-05-02 18:03:37)
Offline
Pages: 1