You are not logged in.
Pages: 1
Hello,
i have a HP laptop (17-AK010NM A10-9620P).
The problem is that when i shutdown it it drains a battery of about 10% overnight (no USB is connected to it). I have tried different solutions, like disable Waken on Lan to no avail.
If i shutdown it from Windows and leavie it over night i get no similar problems.
In BIOS i do not have any options to disable USB charge.
Does anybody experience similar problems?
P.S. I had a hard time to enable wireless card and had to compile driver by myself (RTL8723DE. Is here perhaps any problem)?
LSPCI:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev ca)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1578
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157d
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Device 157a
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1570
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1571
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1572
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1573
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1574
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1575
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] (rev ff)
LSHW:
description: Computer
width: 64 bits
capabilities: smp vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 15GiB
*-cpu
product: AMD A10-9620P RADEON R5, 10 COMPUTE CORES 4C+6G
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
size: 2281MHz
capacity: 2500MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good acc_power nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb bpext ptsc mwaitx cpb hw_pstate vmmcall fsgsbase bmi1 avx2 smep bmi2 xsaveopt arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov cpufreq
*-pci:0
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 33MHz
*-generic:0 UNCLAIMED
description: IOMMU
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 0.2
bus info: pci@0000:00:00.2
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
*-display
description: VGA compatible controller
product: Carrizo
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1
bus info: pci@0000:00:01.0
version: ca
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=amdgpu latency=0
resources: irq:38 memory:e0000000-efffffff memory:d0800000-d0ffffff ioport:5000(size=256) memory:d1500000-d153ffff memory:c0000-dffff
*-multimedia:0
description: Audio device
product: Kabini HDMI/DP Audio
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1.1
bus info: pci@0000:00:01.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:44 memory:d1560000-d1563fff
*-pci:0
description: PCI bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 2.2
bus info: pci@0000:00:02.2
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:4000(size=4096) memory:d1400000-d14fffff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eno1
version: 15
serial: ac:e2:d3:0f:be:e9
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:36 ioport:4000(size=256) memory:d1404000-d1404fff memory:d1400000-d1403fff
*-pci:1
description: PCI bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 2.3
bus info: pci@0000:00:02.3
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:27 ioport:3000(size=4096) memory:d1300000-d13fffff
*-network
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlo1
version: 00
serial: b0:52:16:ab:24:63
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rtl8723de driverversion=4.15.0-20-generic firmware=N/A ip=192.168.0.28 latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: irq:42 ioport:3000(size=256) memory:d1300000-d130ffff
*-pci:2
description: PCI bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 3.1
bus info: pci@0000:00:03.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:29 ioport:2000(size=4096) memory:d1200000-d12fffff ioport:c0000000(size=270532608)
*-generic
description: Unassigned class
product: Illegal Vendor ID
vendor: Illegal Vendor ID
physical id: 0
bus info: pci@0000:03:00.0
version: ff
width: 32 bits
clock: 66MHz
capabilities: bus_master vga_palette cap_list rom
configuration: driver=amdgpu latency=255 maxlatency=255 mingnt=255
resources: irq:40 memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:2000(size=256) memory:d1200000-d123ffff memory:d1240000-d125ffff
*-generic:1 UNCLAIMED
description: Encryption controller
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 8
bus info: pci@0000:00:08.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
resources: memory:d1540000-d155ffff memory:d1100000-d11fffff memory:d1570000-d1570fff memory:d156a000-d156bfff
*-multimedia:1
description: Audio device
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 9.2
bus info: pci@0000:00:09.2
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:45 memory:d1564000-d1567fff
*-usb:0
description: USB controller
product: FCH USB XHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 10
bus info: pci@0000:00:10.0
version: 20
width: 64 bits
clock: 33MHz
capabilities: xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:18 memory:d1568000-d1569fff
*-storage
description: SATA controller
product: FCH SATA Controller [AHCI mode]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 11
bus info: pci@0000:00:11.0
version: 49
width: 32 bits
clock: 66MHz
capabilities: storage ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=64
resources: irq:19 ioport:5118(size=8) ioport:5124(size=4) ioport:5110(size=8) ioport:5120(size=4) ioport:5100(size=16) memory:d156c000-d156c3ff
*-usb:1
description: USB controller
product: FCH USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 12
bus info: pci@0000:00:12.0
version: 49
width: 32 bits
clock: 66MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:18 memory:d156e000-d156e0ff
*-serial
description: SMBus
product: FCH SMBus Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14
bus info: pci@0000:00:14.0
version: 4a
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0
*-isa
description: ISA bridge
product: FCH LPC Bridge
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14.3
bus info: pci@0000:00:14.3
version: 11
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-generic:2
description: SD Host controller
product: FCH SD Flash Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 14.7
bus info: pci@0000:00:14.7
version: 01
width: 64 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: driver=sdhci-pci latency=39
resources: irq:16 memory:d156d000-d156d0ff
*-pci:1
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 101
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 102
bus info: pci@0000:00:03.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 103
bus info: pci@0000:00:09.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 104
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 105
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 106
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 107
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k10temp
resources: irq:0
*-pci:8
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 108
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=fam15h_power
resources: irq:0
*-pci:9
description: Host bridge
product: Advanced Micro Devices, Inc. [AMD]
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 109
bus info: pci@0000:00:18.5
version: 00
width: 32 bits
clock: 33MHz
*-scsi
physical id: 2
bus info: usb@3:4
logical name: scsi1
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-cdrom
description: DVD-RAM writer
product: DVDRW GUE1N
vendor: hp
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: UE00
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: status=nodisc
I search over internet for 2 weeks now but i couldn't find any solution.
Thanks for any help.
Last edited by Shark (2018-05-11 19:46:13)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
wake-on-lan or similar enabled in BIOS?
Offline
@Hi ninian
Sorry to hear that. Hope the issue will be solved soon for your Toshiba as well as my HP. I gues it has to be some underlying thing in kernel that keeps motherboard or something alive after shutdown because i do not have similar issues if i shutdown it with Windows.
@Hi TheSgtBilko
No WOL enabled in BIOS (there is no such functionality), i disabled WOL in Arch.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Define "shutdown" - it's perfectly normal to loose battery in S0 - S3, to a certain extent in S4 (for the CMOS), but not in S5 or S6 (aside the chemical self-discharge of the battery)
Also notice that Windows 10 "fastboot" actually means that you "shut down" the system to S4, what can confuse the ACPI if you boot another OS while windows is hibernating.
Online
@seth hi
I shutdown computer under KDE (no hibernation), i also tried
"systemctl poweroff"
and also with shutdown command.
I disabled fastboot in WIndows and hope i will get some better result in the morning. Also, last night i went to Windows, restart it and boot it into Arch and then shutdown it. In the morning battery was as usually drained for about 8%.
I installed linux-amd-staging-drm-next-git kernel, perhaps this one will yield better results.
I guess Linux is missing some hardware when it shutdowns which in consequence drains the battery, i do not know.
Last edited by Shark (2018-05-03 17:53:00)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
So, changing to AMD kernel and disabling fastboot in Windows didn't make any changes.
I guess i will have to use Windows for unforseeable future because i do not want draining my battery and i do not want to restart Linux, go to Windows and shutdown it from there in order for laptop to be properly shutdown.
Really a pitty i have to do this, i have never experienced such a problems with Linux.
Thank you for your help.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
You could try to cheat the BIOS into believing its running some windows:
acpi_osi=! acpi_osi="Windows 2009"
Ftr:
I guess Linux is missing some hardware when it shutdowns which in consequence drains the battery, i do not know.
No. Linux terminates alls processes, stalls the kernel and then tells the BIOS to enter a certain state (S5 or S6 for power-off). It's then the BIOS' (or rather UEFIs) job to do the rest, the OS is gone at this point.
However, ACPI issues are all too common :-(
Online
I've not tested, but it seems:
shutdown -H now
...will HALT every software running on it without actually powering off the system, then you can use the hardware power button; maybe it is valid as a temporary workaround.
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Online
You could try to cheat the BIOS into believing its running some windows:
acpi_osi=! acpi_osi="Windows 2009"
Interesting hack, but battery drains despite changes made.
I've not tested, but it seems:
shutdown -H now
...will HALT every software running on it without actually powering off the system, then you can use the hardware power button; maybe it is valid as a temporary workaround.
Perhaps this could work. Do you think if i do this long-term that it could harm any device (SSD, graphic, RAM ...) in laptop?
I will also try live environment of the new FEDORA - just in case.
I was thinking Windows and UEFI can share some responsibility for the situation. In UEFI entry list i can still see old entries of openSUSE and Kubuntu for which efibootmanager is not able to delete it. I will try to update them from Windows and see if that would work.
A desperate man solutions
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Perhaps this could work. Do you think if i do this long-term that it could harm any device (SSD, graphic, RAM ...) in laptop?
Now that i think of it, maybe (maybe), that could harm rotative disks, but not SSD, GPU or RAM.
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Online
If the hardware is totally broken ....
The power button is not supposed to abruptly cut power (what can indeed cause a rotating rw header to scratch over your drive) but to power off the system. It's bad to do that for a running system (because you leave it in an undefined state) but the kernel is halted and there's no systematic risc to the HW in any case.
Online
1.
@kokoko3k, seth
Thank you for explanations, i guess i will have to use HALT workaround. So i created this script for KDE to log out and then trigger HALT command:
#!/usr/bin/zsh
#Log out from KDE
qdbus org.kde.ksmserver /KSMServer logout 0 3 3 && sleep 3s
#Halt the system
sudo systemctl halt
But his one is obvious not working since it logs out and ends terminal session befor HALT command is executed. I will have to dig in a little bit more
So if i understand properly, this command will properly unmount all partitons (including NTFS) and take care of all systems, right?
2.
I tried Fedora Live system and shutdown laptop from there of but as expectedly didn't work.
3. Seth suggested this ACPI problem could be connected to UEFI. I tried first to clean up old UEFI entries with below command:
sudo efibootmgr -b 2 -B
This command almost do its job - it removes entries but they reappear after reboot. I laso tried inside Windows with Easyeufi to no avail. I have not UEFI shell although i can access Windows CMD - i have yet to find a proper command.
Last edited by Shark (2018-05-05 15:42:34)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Well, If logging out first is necessary (is it? Often i just open konsole to write poweroff), you may need to make a systemd user service containing the commands needed and call it instead.
Btw, does the power draining stops that way?
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Online
Well, If logging out first is necessary (is it? Often i just open konsole to write poweroff), you may need to make a systemd user service containing the commands needed and call it instead.
Btw, does the power draining stops that way?
Ok, i will dig into systemd services and tried to make a script.
Otherwise, i tried yesterday wth HALT command and after seveal hours battery was 100%. I have yet to made some test but i guess this will do the job.
Now i have to figure out how to remove UEFI entries - i have a feeling it has to be done something with this.
Thank you for now.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Actually i tested more thorougly HALT command and it is not working, Maaaan ):
I believe it has to be something with UEFI because i found out how to enter into UEFI shell via uefi-shell-git and i can remove entries but they reappeaer after reboot.
If physical shutdown doesn't help then this is really strange. Linux has to do something with communication to BIOS that something is not powered of, i suppose.
Last edited by Shark (2018-05-06 07:06:22)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Is the battery in good shape?
Are you 200% sure it only happens 'in linux'?
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Online
Hey guys ...
So, i did a bit of thinking and testing (some really stupid out of despair solutions) different configurations and if there wasn't you two guys i would never thought of it.
You mentioned that UEFI could be a culprit so i installed GRUB for GPT/Legacy boot configuration and it worked out no more battery draining if the system is booted via Legacy boot.
So, the problem is not solved per se but we do have a working workaround.
The other thing i noticed is that if i go to Windows' Login (display) manager and choose shutdown the battery would drain as well but now if i got the account and shutdown Windows from there of. Really strange.
It has to be a problem with UEFI but on HP website i can't find any updates for BIOS, none.
Thank you for your help, without you two i would stay on Windows for while.
Last edited by Shark (2018-05-08 19:27:49)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Hi,
the problem has not gone away it just changed somehow. In the evening when i shutdown Arch till morning (8 hours) i do not notice any battery draining (in this period of time drains occurs only if booted from UEFI). But when i come home 8 hours later it drains battery for about 10%.
So i guess computer does something after 8 hours that drains battery - do you think it could be something with hwclock? Is it possible do disable it?
Thank you.
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
Pages: 1